12. A 10 mH inductor and a 100 a resistor are connected in parallel. The circuit is supplied with 24 VAC
2,000 Hz. What's the impedance (rounded) of the circuit?
A. 57.382
B. 108.7122
C. 78.23 22
D. 98.16 22
The impedance of the given AC circuit containing resistor and inductor parallel to each other is 55.71 ohms.
The given parameters;
inductance of the inductor, L = 10 mHresistance of the resistor, R = 100 ohmsThe inductive reactance is calculated as follows;
[tex]\omega _l = 2\pi fl\\\\\omega _l = 2\times 3.142 \times 2,000\times 10\times 10^{-3} = 125.68 \ ohms[/tex]
The impedance is the total opposition to the flow of current in the AC circuit and it is calculated as follows;
[tex]Z _{total} = \frac{1}{\frac{1}{Z_l} + \frac{1}{Z_R} } \\\\Z _{total} = \frac{1}{\frac{1}{125.68} + \frac{1}{100} }\\\\Z _{total} = 55.71 \ ohms[/tex]
Thus, the impedance of the given circuit is 55.71 ohms.
Learn more here:https://brainly.com/question/13134405
Of the two forms of friction you studied,_____ friction is the one that must be overcome in order to start something moving.
Answer:
static friction will be your answer
Evelyn learns that a sound wave can be recorded electronically as an analog signal or as a digital signal. She investigates these two signal types. She records her voice using a tape recorder, which uses an analog signal to produce sound when played back. She also records her voice using a computer, which uses a digital signal to produce sound when played back. Evelyn replays each recording 100 times.
a. Describe a difference that Evelyn would most likely hear between the two recordings after being replayed 100 times.
b. Explain why the two recordings would sound different after being replayed 100 times.
Answer:
can u help me with this too, i currently have it in an assignment and i dont know the answer
Explanation:
What two things form ionic bonds
Answer:
ionic bonds are formed between cations and anions
Explanation:
A cation is formed when a metal ion loses a valence electron while an anion is formed when a non-metal gains a valence electron. They both achieve a more stable electronic configuration through this exchange.
Convert the following to second
1minute
Answer:
60 seconds
Explanation:
bxdnfjrjrjjrjrjrj
what is the equation of universal law of garavitation
Answer:
[tex]F= \frac{GmM}{ {r}^{2} } [/tex]
G= gravitational constant
F= Gravitational force
m= mass of object 1
M= mass of object 2
r= distance between two objects
nếu tăng khoảng cách giữa hai điểm lên 4 lần thì lực tương tác tĩnh điện giữa chúng sẽ
Answer:
điện giữa chúng s
Explanation:
A tight knot can be easily opens by using a longer spanner. Give reasons
It is because the effort distance is greater than the load distance
Explanation:
As we know, Effort×effort distance = load × load distance
So when effort distance is increases,
The effort decreases
So when the spanner’s handle is long
A tight knot can easily be opened by less effrot
I hope it helped
Online.Vs. In person
Which one would you choose
Answer:
Online.Vs. In person for what exams board ones?
2. A cat chases a mouse across a 1.0 m high table. The mouse steps out of the way, and the cat slides off the table at a
speed of 5.0 m/s.
a. How long will it take the cat to hit the floor?
b. How far from the base of the table will the cat land?
Answer:
Below
Explanation:
Here is what we are given in the problem :
dy = - 1.0 m (this is negative because the cat falls)
Vx = 5.0 m/s
We can use this equation to find the time that it will take the cat to fall :
t = √-2dy / g
t = √-2(-1.0) / 9.8
t = √0.20408
t = 0.45 (round this to 2 sig figs)
t = 0.5 seconds
Now we can find dx (distance in the x direction)
dx = vx (t)
dx = (5.0m/s)(0.45s)
dx = 2.258769 m
dx = 2.3 m
Hope this helps! Best of luck <3
If you were to make a Lewis dot structure for and Element what 2 parts would you include?
The two parts of a Lewis dot structure for are the symbol of the element and the dots representing valence electrons around the symbol.
The Lewis dot structure is a representation of an element using its symbol as well as dots to show valence electrons. The Lewis dot structure helps us to see the number of valence electrons in chemical species.
There are two main parts of a dot electron structure or Lewis structure of a chemical specie and they are;
The symbol of the elementThe dots that show the number of valence electrons in the structure.Learn more: https://brainly.com/question/10079361
Which variable is described as a factor you can change to observe whether or not it has an effect on the outcome variable?
Control
Hypothesis
Test
Question
Answer: The dependent variable. Dependent variables (DV): These are the factor that you observe or measure.
Explanation:
These are the factors or conditions that you manipulate in an experiment. Your hypothesis is that this variable causes a direct effect on the dependent variable. Dependent variables (DV): These are the factor that you observe or measure.
Answer:
I believe the answer succumbs to the hypothesis. More over, I actually believe the answer should be the independent variable since that makes so much more sense.
Explanation:
Sue and Jenny kick a soccer ball at exactly
the same time. Sue’s foot exerts a force of
52.7 N to the north. Jenny’s foot exerts a
force of 91 N to the east.
a) What is the magnitude of the resultant
force on the ball?
Answer in units of N. b) What is the direction of the resultant force
(measured from East)?
Answer in units of ◦
.
a)
Answer:
Using Pythagorean Theorem.
[tex]F_{R} = \sqrt{Fn^{2} + Fe^{2} } \\\\ F_{R} = \sqrt{52.7^{2} + 91^{2} }\\\\ F_{R} = 105.16N[/tex]
b)
Answer:
[tex]tan^{-1} \frac{opp}{adj} \\ \\ tan^{-1} \frac{52.7}{91} \\ \\ = 30.08^{o}[/tex]
The resultant force of the two forces which are acting perpendicular to each other is 105.15 N and the direction is 59.91 ° from east.
What is force?Force is an external agent acting on a body to change it from the state of motion or rest. If two forces acting on a body and both are applied in the same direction, the resultant force will be the sum of two forces in magnitude.
If the two forces are in opposite directions, then the resultant force will be the substracted value of their magnitude. If one force is to the north and other is to the east, then they are perpendicular to each other.
Hence, to find the resultant force we can use the Pythagoras theorem for right angled triangle. The hypotenuse will be the resultant force.
Resultant force = √ (52.7² + 91² )
= 105. 15 N.
The direction of the force = Tan ⁻¹ (91 / 52.7 )
= 59.91 ° from east to north.
Hence, the resultant force is 105.15 N with a direction of 59.91 ° from east.
To find more on resultant force, refer here:
https://brainly.com/question/16380983
#SPJ2
pulls a wagon a distance of 32 meters the handle is above an angle of 20 degrees above horizontal if you pull on it with a force of 27 N what work is it
Hi there!
When finding work (J) given force (N), we use the equation:
W = FdcosФ <-- Only take into account the force in the direction of motion
Plug in the given values:
W = 27(32)cos(20) = 811.89 J
Explanation:
Here,
Given that,
pulls a wagon a distance of 32 meters the handle is above an angle of 20 degrees above horizontal if you pull on it with a force of 27 N
To find,
The total work doneAs we know that,
[tex]{\boxed{\sf{W=f.d.cos\theta }}}[/tex]
According to the question,
[tex]W=27(32)cos{20}\\\\w=811.89J[/tex]
when are the three equations of motion applicable 50 points please help
Answer:
In case of uniformly accelerated motion along a straight path
Explanation:
[tex]\sf{}[/tex]
hope it's helpful to you ☺️
2. True or False Every sample of a pure substance has exactly the same composition
and the same properties.
3. What are the two categories of pure substances?
a.
b.
شب نه ه ن
Name:
Answer:
the correct answer is False
Explanation:
i hope its right
ai. What are ruminants?
aii. Give two examples of ruminants.
bi. What is force?
bii. State four effects of forces on a body.
biii. Mention three sub-atomic particles.
Ruminants are the mammals that can digest cellulose from plant and chew the cud
aii Cow and goat
bi A force is a push or pull upon an object resulting from the object interaction with another object
bii 1 Changes it's shape or size
2 To start moving
3 To stop moving
4 To accelerate or decelerate
biii Proton neutron and electron
Answer:
Same answer please. Hope it helps.
how do mass and distance affect the force of gravity?
[tex]\color{Black}\huge{Answer} [/tex]
The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them. This means that the force of gravity increases with mass, but decreases with increasing distance between objects.The Newton's Cradle toy will slow down and stop because some of the energy is being transformed into s________ energy and also th______ energy.
Answer:
sound energy and thermal energy due to friction
Explanation:
A battery-powered lawn mower has a mass of 52.0 kg. If the net external force on the lawn
mower, including both your push and any resistance, is 44.5 N (about 10 pounds), then what
will be the magnitude of the mower's acceleration?
Hi there!
We can use the equation:
∑F = ma, where:
∑F = net force (N)
m = mass (kg)
a = acceleration (m/s²)
Rearrange in terms of acceleration:
∑F/m = a
Plug in the given values:
44.5/52 = 0.856 m/s²
The 500 pages of a book have mass of 250kg. What is the mass of each page in kg
Answer:
.5 kg per page
Explanation:
250/500= .5 kg
Calculate the acceleration of the two masses shown in the picture above.
A. 0.77 m/s^2
B. 3.92 m/s^2
C. 8.62 m/s^2
D. 5.91 m/s^2
Hello!
We can begin by summing the forces acting on each mass. (Tension is CONSTANT because the string is both frictionless and massless).
On the 3 kg block: (Ignore forces acting in the vertical direction since there is no motion in that axis)
∑F = -M₁gsinФ + T
On the 8 kg block:
∑F = -T + M₂g
Sum the forces:
∑F = -M₁gsinФ + T -T + M₂g
∑F = -M₁gsinФ + M₂g
Divide by both masses to get the acceleration:
[tex]a = \frac{-M_1gsinФ + M_2g}{m_1+m_2}[/tex]
Plug in values: (g = 10m/s²)
[tex]a = \frac{-(3)(10)(sin30)+8(10)}{3+8} = 5.91 m/s^2[/tex]
An object is moving 45 m/s and a mass of 34 kg , What is the kinetic energy?
Answer: KE = 34.425 kJ
Explanation:
KE = (1/2) mv^2
KE = (0.5)*(34kg)(45m/s)^2
KE = (0.5)*(34kg)(2025m^2/s^2)
KE = 34425 kg*m^2/s^2
1 Joule = 1 kg*m^2/s^2
KE = 34.425 kJ
pls help will give brainliest
Explanation:
the correct answer is Option 5.√½gh.
hope this helps you.
Jus need the answers <3
Answer:
blahhhhhh ummm
Explanation:
mark as brainlist pleaseeeee
Study the given figures and calculate their volume.
Explanation:
to do that
so number 1=64
2=15
A lawyer most likely has __________. a.spatial intelligence b.practical intelligence c.analytical intelligence d.creative intelligence
The type of intelligence required by a profession depends on its job description. Lawyers most likes have analytical intelligence.
A renowned psychologist named Howard Gardner devised a theory of multiple intelligence. This means that nobody is really not intelligent because a person must posses one or more of these multiple intelligence.
A lawyer has a lot to do with analytic reasoning and comparison of evidence to determine their validity. This task requires a strong analytical mind hence a lawyer requires analytical intelligence.
Learn more: https://brainly.com/question/4158015
Tape a piece of white paper to your wall.Aim the flashlight at the CD so that it makes the rainbow reflect onto your blank paper.
Answer:
where is the question girl
Two objects are thrown vertically upwards at the same time at speeds of 50 m/s and 80 m/s, as shown in the figure. What should the height, h, be so that both objects land at the same time?
The kinematics allows finding the result for the height of the cliff so that the bodies go down together is: 1,533 m
Kinematics studies the movement of bodies, finding relationships between the position, velocity and acceleration of bodies
In this case the bodies are thrown vertically so their acceleration is the gravity acceleration, directed downwards.
Let's set a reference system with the positive upward direction and zero at the base of the cliff, let's use the subscript 1 for the body that comes out from the bottom of the cliff and the subscript 2 for the body that comes out of the top, the equations for each body they are:
body 1
[tex]v_1^2 = V_{o1}^2 - 2g (y_1-y_{o1} )[/tex]
body 2
[tex]v_2^2 = v_{o2}^2 - 2g (y_2-y_{o2})[/tex]
In this case they indicate the initial velocities of each body, [tex]v_{o1}[/tex] = 80 m/s and [tex]v_{o2}[/tex] = 50 m/s, the initial height [tex]y_{o1}[/tex] = 0 and [tex]y_{o2}[/tex] = h, when the bodies fall at the same time they must begin to descend from the same height
y₁ = y₂
The velocities at this point must be zero
v₁ = v₂ = 0
We substitute
0 = [tex]v_{o1}^2 - 2 g y[/tex]
0 = [tex]v_{o2}^2 - 2 g ( y + h)[/tex]
Let's solve the system of equations
[tex]h = \frac{v_{o1} - v_{o2}}{2g}[/tex]
Let's calculate
h = [tex]\frac{80-50}{2 \ 9.8}[/tex]
h = 1.53 m
Consequently, the kinematics allows finding the result for the height of the cliff so that the bodies go down together is: 1.53 m
Learn more here: brainly.com/question/17772577
What makes carbohydrates good at storing energy?
After we eat, our glucose levels rise when carbohydrates are fully broken down. This alarms beta cells (in the pancreas) to release insulin into our bloodstream and altogether insulin allows the glucose to enter our cells and be utilized for energy. Some carbs are used for energy and the rest is stored as fat!
Hope I helped in some way :)