A car generates 2552 N and weighs 2250 kg. What is its rate of acceleration

2 m/s ^2
0.88m/s^2
5,742,000m/s^2
1.13m/s^2

Answers

Answer 1

Answer:

[tex]a=1.134\frac{m}{s^2}[/tex]

Explanation:

Hello there!

In this case, by considering the physical definition of force in terms of mass and acceleration:

[tex]F=m*a[/tex]

Given the generated force and the involved mass, we can compute the required acceleration as shown below:

[tex]a=\frac{F}{m}\\\\a=\frac{2552N}{114kg}[/tex]

Yet it is necessary to break out Newtons to:

[tex]a=\frac{2552\frac{kg*m}{s^2} }{114kg}\\\\a=1.134\frac{m}{s^2}[/tex]

Best regards!


Related Questions

A 72.0 g sample of an organic solid is dissolved in 180mL of water. The solid is extracted using one 60 mL extraction in the first extraction of an organic solvent which has a partition (distribution) coefficient with water of 10. The first extraction removed 55.4 g of solid from water. What are the numbers that need to go in box A and B to calculate the volume of solvent (y) that would be necessary to remove an additional 7.0g from the remaining sample dissolved in water. You DON'T have to complete the calculation to solve for y.

Answers

Answer:

[tex]V_{7.0}\approx 235ml[/tex]

Explanation:

From the question we are told that

mass of sample [tex]M=72.0 grams[/tex]

volume of water [tex]V=180 mL[/tex]

volume for extraction [tex]V'=60mL[/tex]

partition (distribution) coefficient water [tex]d=10[/tex]

initial extraction removal [tex]x=55.4g[/tex]

Generally the equation for the weight of sample [tex]x_n[/tex]  is mathematically given by

[tex]x_n=x*(\frac{DV}{DV+V'})^n[/tex]

[tex]x_n=55.4(\frac{10*180}{10*180+60})^1[/tex]

[tex]x_n=53.613g[/tex]

Generally the weight extracted [tex]x_e[/tex] is therefore

[tex]w_e=x-x_n[/tex]

[tex]w_e=55.4-53613[/tex]

[tex]w_e=1.787[/tex]

[tex]w_e=1.787[/tex] is extracted with 60ml solvent .

Therefore volume of solvent (y) that would be necessary to remove an additional 7.0g

[tex]V_{7.0}=\frac{60}{1.767}*7[/tex]

[tex]V_{7.0}=235.030ml[/tex]

[tex]V_{7.0}\approx 235ml[/tex]

Can tell the answer pls

Answers

Explanation: where the article????

what is the molecular geometry for CH2Br2?

Answers

HCH bond angle is ~110 degrees.

What is the source of the forces that cause this plate movement

Answers

Convection currents in the mantle, I got it right on a p e x

fossil fuels form in sedimentary rocks when-

Answers

Answer:

fossil fuels form in sedimentary rocks when increased heat and pressure applies to fossils.

Explanation:

fossil fuels are made when sedimentary rock gets heat and pressure increased.

define the term semiconductor and give an example of a metalloid

Answers

Answer:

A metalloid is a chemical element that exhibits some properties of metals and some of nonmetals.The closer you get to the zone, the more blurred the properties become. Metalloids tend to be semiconductors; silicon is the best known example of a semiconductor. Most microchips and microprocessors are made with silicon.

Explanation:

That is what i know on the answer

To solve this we must be knowing each and every concept related to metalloid. Therefore, in above given ways semiconductor can be defined.

What is metalloid?

Metalloids are chemical elements with physical and chemical characteristics that fall between between metal and nonmetal.

A metalloid is indeed a chemical element with characteristics of both metals and nonmetals. The properties grow increasingly blurred as you move closer to the zone. The seven most well-known metalloids are boron, germanium, silicon, antimony, arsenic, tellurium, and polonium.

Metalloids are often semiconductors, with silicon being the most well-known example. Silicon is used to make the majority of microchips and microprocessors.

Therefore, in above given ways semiconductor can be defined.

To know more about metalloid, here:

https://brainly.com/question/2548493

#SPJ2

25 ml of liquid and has a mass of 19 grams. Calculate the density.

Answers

The density formula is mass divided by the volume. The mass in this case is 19 grams and the volume 25 ml.
The density is 0,76 g/ml.

Calculate the ratio of the effusion ratesbetween chlorine gas (Cl2, molar mass = 71 g/mol) and iodine gas(I2, molar mass = 254 g/mol).
a)0.280
b)1.89
c)3.58
d)8.43

Answers

Answer:

d is the correct answer

Explanation:

You have to decide to change the temperature at which you run a certain reaction in hope of obtaining more product more quickly. You find that you actually get less of the desired product, although you get to the equilibrium state more quickly. Explain what happened.

Answers

Answer:

see explanation

Explanation:

The reaction has a negative rate law; i.e., Rate = - ΔConcentration / ΔTime which is graphically a negative slope for the plot of Rate as a function of reactant concentration. => Rate ∝ f(Reactant Concentration). However, by raising the temperature, an increase the probability of reaction occurs and the formation of more product.

A piece of unknown solid substance weighs 437.2 g, and requires 8460 J to increase its temperature from 19.3 °C to 68.9 °C.What is the specific heat of the substance?

Answers

Answer:

0.3832

Explanation:

Givens

m = 437.2 grams

c = ?

delta t = 69.8 - 19.3

H = 8460 J

Formula

H = m*c*Δt

Solution

8460 = 437.2 * c * (69.8 - 19.3)

8460 = 437.2 * c * 50.5

8460 = 22078.6 * c

c = 8460 / 22078,6

c = .3832 J / (oC * gr)

Reaction of HBr with 3-methylcyclohexene yields a mixture of four products cis-and trans-1-bromo-3-methylcyclohexane and cis-and trans-1-bromo-2-methylcyclohexane. The analogous reaction of HBr with 3-bromocyclohexene yields trans-1,2-dibromocyclohexane as the soul product.

Required:
Draw structures of the possible intermediates and mechanismfor the latter reaction.

Answers

Answer:

See explanation

Explanation:

The mechanism of this reaction including intermediates are shown in the image attached to this answer.

The reaction of  HBr with 3-bromocyclohexene yields trans-1,2-dibromocyclohexane as the sole product because; the proton first attacks the  3-bromocyclohexene  and a brominium ion is formed. This brominium ion is a cyclic intermediate as shown in the image attached.

Attack of a bromine ion afterwards must lead to the formation of trans-1,2-dibromocyclohexane as shown.

Which element had the smallest atomic radius

Answers

Answer:

helium is the answer

Explanation:

helium is the smallest element in francium is the largest hope this helps

If 50.0 g of silicon dioxide is heated with an excess of carbon, 27.9 g of silicon carbide is produced. What is the percent yield of the reaction

Answers

Answer: The percent yield of the reaction is 83.5 %

Explanation:

The given balanced equation is

[tex]SiO_2+3C\rightarrow SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]C[/tex] is the excess reagent.

According to stoichiometry :

60.08 g of [tex]SiO_2[/tex] produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of [tex]SiO_2[/tex] will produce=[tex]\frac{40.11}{60.08}\times 50.0=33.4[/tex]  of [tex]SiC[/tex]

 Experimental yield of SiC = 27.9 g

Percent yield = [tex]\frac{\text {Experimental yield}}{\text {theoretical yield}}\times 100=\frac{27.9g}{33.4g}\times 100=83.5\%[/tex]

Thus  percent yield of the reaction is 83.5 %

The percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

What is the chemical balance of the equation?

The chemical equations are balanced when the reactants react to form products. The reactants and products react in proper ratios and if they are not in ratio then we balance them by adding the required quantity in the reactants and the products.

The given balanced equation is

[tex]\rm SiO_2+3C---- > SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and is the excess reagent.

According to stoichiometry

60.08 g [tex]SiO_2[/tex] of  produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of  [tex]SiO_2[/tex] will produce=  [tex]\dfrac{40.11}{60.08} \times 50=33.4\ SiC[/tex]

The experimental yield of SiC = 27.9 g

The percentage yield will be calculated as

[tex]\rm Percentage \ Yield = \frac{Experimental\ yield}{Theoretical \ yield }\times 100[/tex]

[tex]\rm Percentage \ yield =\dfrac{27.9}{33.49} \times 100=83.5[/tex]

Thus the percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

To know more about balanced chemical equations follow

https://brainly.com/question/26227625

Sodium acetate never precipitates
True or False?

Answers

Answer:

it is false Sodium acetate NEVER precipitates

Answer:

It is indeed true, Sodium acetate never precipitates

8. How much heat will be released when
18.6 g of hydrogen reacts with excess O2
according to the following equation?

Answers

Answer:

15 is it

Explanation:

Iron has a density of 7.87 g/cm^3. What is the mass of 55.2 cm^3 of iron?

Answers

Answer:  Formula: Mass = (Volume)(Density)

Iron Density = 7.87 g/cm^3

Volume of Iron = 55.2 cm^3

Mass=(V)(D)

Mass= (55.2 cm^3) x (7.87 g/cm^3)

Mass=  434,42 g

Explanation:

Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

What do you mean by density ?

The term density is defined as the measurement of how closely a material is packed together.

It is also defined as the mass per unit volume. Density Symbol is D or ρ Density Formula is ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.

Density is an important because it allows us to find out what substances will float and what substances will sink when placed in a liquid.

Formula:

Mass = (Volume)(Density)

Given:

Iron Density = 7.87 g/cm³

Volume of Iron = 55.2 cm³

Mass=(V)(D)

Mass= (55.2 cm³) x (7.87 g/cm³)

Mass= 434,42 g

Thus, Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

To learn more about the density, follow the link;

https://brainly.com/question/29775886

#SPJ2

which method is adopted in the seperation of lead chloride from water​

Answers

Explanation:

by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.

Calculate the number of grams of Hydrogen required to produce 5.73 grams of water. 2H2+O2--->2H2O 2 grams 0.636 grams 1.2 gram 7.98 grams

Answers

Explanation:

32

2H

2

+O

2

→2H

2

O

Molecular mass of H

2

=2 g/mol

Molecular mass of O

2

=32 g/mol

From the balanced chemical equation,

2×2=4 g of hydrogen requires 32 g of Oxygen to react completely

Estimate the solubility of barium fluoride, BaF2, in a 0.100 M solution of barium nitrate, Ba(NO3)2, given that the K sp of BaF2 is 2.45×10-5.
A)7.83×10-3 M
B)1.57×10-2 M
C)7.83×10-4 M
D)2.45×10-4 M

Answers

Answer:

A) 7.83 x 10^-3 M

Explanation:

7.83 x 10⁻³ M is the solubility of barium fluoride, BaF[tex]_2[/tex], in a 0.100 M solution of barium nitrate, Ba(NO[tex]_3[/tex])[tex]_2[/tex], given that the K sp of BaF[tex]_2[/tex]is 2.45×10-5. The correct option is option A.

What is solubility?

The ability of a material, the solute, to combine with some other substance, the solvent, is known as solubility in chemistry. Insolubility, or the solute's inability to create such a solution, is the opposite attribute. The concentration of a solute inside a saturated solution is typically used to determine how much of a substance is soluble in a certain solvent.

The two compounds are said to be just at solubility equilibrium at this time. There might not be a limit for some solutes or solvents, in which case they two are referred to as "miscible in any quantities." Whereas the solvent is often solid or liquid, the solute may be either a solid, liquid, or gas.

BaF[tex]_2[/tex]=0.100 M

Ba(NO[tex]_3[/tex])[tex]_2[/tex]=0.100 M

K sp of BaF[tex]_2[/tex]=2.45×10⁻⁵

solubility of barium fluoride=2.45×10⁻⁵×0.100 =7.83 x 10⁻³ M

Therefore, the correct option is option A.

To know more about solubility, here:

https://brainly.com/question/14366471

#SPJ2

Easy question please help.

Answers

Answer:

1 km an hour

Explanation:

i mean its pretty easy like you said if at 4 hours its traveled 4 km then its going 1 km an hour and at 10 its gone 10 km

For many years chloroform (CHCl3) was used as an inhalation anesthetic in spite of the fact that it is also a toxic substance that may cause severe liver, kidney, and heart damage. Calculate the percent composition by mass of this compound to four significant figures.

Answers

Answer:

SEE EXPLANATION

Explanation:

We must first obtain the molar mass of CHCl3 as follows;

CHCl3 = ( 12.01 * 1 )+ (1.008 * 1 ) + ( 35.45 * 3 ) => 119.37 g/mol

Then we obtain the percentage by mass of each element

For Carbon =  ( atomic mass C / molar mass CHCl3 ) * 100

 

C  =  (12.01 / 119.37 ) * 100

C = ( 0.1006 * 100 )

C =  10.06 %

For Hydrogen :

H = ( atomic mass H / molar mass CHCl3 ) * 100

H = ( 1.008 / 119.37 ) * 100

H = 0.008444 * 100

H = 0.8444 %

For Chlorine :

Cl  ( molar mass Cl3 / molar mass CHCl3 ):

Cl =  ( 3 * 35.5 / 119.37 ) * 100

Cl =  ( 106.5 / 119.37 ) * 100

Cl = 0.8921 * 100

Cl = 89.92%


2.85 x 10-3 moles of an unknown compound has a mass of 0.206 g. The compound could be:

Answers

Answer:

Calcium sulfide (CaS)

Explanation:

From the question

Number of mole (n) = reacting mass (R)/molar mass (m)

n = R/m.................... Equation 1

make m the subject of the equation

m = R/n...................... Equation 2

Given: R = 0.206, n = 0.00285 moles.

Substitute these values into equation 2

m = 0.206/(0.00285)

m = 72.3 g/mol

From the above, the compond with molar mass close to 72.3 g/mol is Calcium sulfide (CaS)

At some temperature for the equilibrium PX3(g) + X2(g) # PX5(g) the equilibrium constant is 0.74. At the same temperature the equilibrium constant for PX5(9) + PX3(g) X2(g) is​

Answers

Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

Explanation:

Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]  

For the given chemical reaction:

[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]

The expression for [tex]K_c[/tex] is written as:

[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

For the reverse chemical reaction:

[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]

The expression for [tex]K_c'[/tex] is written as:

[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]

[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]

The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

You rub a comb on your hair and then the comb is able to pick up pieces of paper. Explain why this happens​

Answers

Answer:

This happened because,the comb was charged with static electricity when it was rubbed on your hair.

(¬_¬)ノ( ˘ ³˘)♥

If 8.25g N2 gas is inside a 1.50L flask at 325K what is the pressure inside the flask

Answers

Answer:

8.26g

Explanation:

8.25g +1.50÷325k=8.26g

please help with 1 i would like to see the work please​

Answers

Answer:

D. 0.063 mol

Explanation:

We can calculate the number of moles by using the definition of molarity:

Molarity = moles / liters

As we are given both the molarity and the volume:

0.05 M = moles / 1.25 L

We can calculate the number of moles:

moles = 0.05 M * 1.25 Lmoles = 0.063 mol

Thus the answer is option D.

Which of these compounds are molecular?
CBr4
FeS
P4O6
PbF2

Answers

Answer:

I think it's answer is P4O6

I hope it's helpful for you...

14. If one half-life is the amount of time it takes for a radioactive isotope to decay by a factor of 2,
approximately which percent describes how much of the initial quantity of a substance would
remain after 2.3 half-lives?

Answers

Answer:

Since the equation for amount remaining is (1/2)^n, where n stand for the number of half lives, after 2.3 half lives the equation is (1/2)^2.3. This makes the answer about   1/4.92, which converts to about 20% of the original amount.

Explanation:

Since the equation for amount remaining is (1/2)^n, where n stand for the number of half lives, after 2.3 half lives the equation is (1/2)^2.3. This makes the answer about   1/4.92, which converts to about 20% of the original amount.

identify the solute in the following: carbon dioxide dissolved in water

a. water
b. carbon dioxide
c. none of the above
d. carbon dioxide and water

Answers

Answer:

B

Explanation:

its solute state is gas and dissolve in (solvent) liquid which is water


15. Kinetic and potential energy both relate to
a. friction
a. heat
b. light
d. motion

Answers

Answer:

All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.

Explanation:

hope help you pls thanks...

D is correct option

D, Motion

All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.
Other Questions
Why would the electoral system matter to explain levelsof redistribution? How plausible do you find the theoreticalarguments that connect electoral systems and policymaking? On1/2/2021, the County of Santa Teresa issued a 20-year-life serial bond with a principal of $8,000,000 and 5% annual interest Interests are paid on January 1 and July 1 with $400,000 in bonds being retired on each interest payment date. The debt service fund levies property taxes in the amount to cover interest and principal paymentsPrepare entries for the Debt Service Fund for the following transactions. 1. Prepare the entries to record the budget for the debt service fund for Year 20212. Prepare the entry to levy the property taxes 3. Prepare the entry to pay the interest and principal on 7/1/2021 create indicator variables for the 'history' column. considering the base case as none (i.e., create low, medium and high variables with 1 denoting the positive case and 0 the negative) E 113 D Question 19 The circular flow model can be used to measure GDP. In the simple version, there are only firms and households. Two arrows go from firms to households and 2 arrows go from households to firms. a. What do the letters GDP stand for? (1 point) b. Which two arrows go from firms to households? Explain your answer. (6 points) c. Which arrow represents total spending on products? Explain your answer. (3 points) d. Which 2 other ways to measure GDP can be shown in the circular flow model? (2 points) e. Does a trade surplus increase GDP? Explain your answer. (5 points) Edit View Insert Format Tools Table 12pt Paragraph BIUA 1 17 pts 94F Sunny ING 111 PM Blasting caps containing Lead Azide detonate. How fast is the chemical reaction occurring? Subsonic speeds (slower than the speed of sound) Supersonic speeds (faster than the speed of sound) Submit Activate Win Let f(x)=x312x2+45x13. Find the open intervals on which f is increasing (decreasing). Then determine the x-coordinates of all relative maxima (minima). 1. f is increasing on the intervals 2. f is decreasing on the intervals 3. The relative maxima of f occur at x = 4. The relative minima of f occur at x = Notes: In the first two, your answer should either be a single interval, such as (0,1), a comma separated list of intervals, such as (-inf, 2), (3,4), or the word "none". In the last two, your answer should be a comma separated list of x values or the word "none". lse: flotation costs need to be taken into account when calculating the cost of issuing new common stock, but they do not need to be taken into account when raising capital from retained earnings.. true or false Keychain with 9 key open exactly one lock. One key after the other is tried in a random order. No key is tested more than once.In the expected value one needs how many tries to find the right key? In a standard normal distribution, the range of values of z is froma. minus infinity to infinityb. -1 to 1c. 0 to 1d. -3.09 to 3.09 A car starting from rest accelerates at a constant 2.0 m/s2 for 10 s. It then travels with constant speed it has achieved for another 10 s. Then it finally slows to a stop with constant acceleration of magnitude 2.0 m/s2. How far does it travel after starting?I keep getting 300, I don't know what I'm doing wrong. PLEASE SHOW WORK. The answer is supposed to be 400. Under the expense approach to recognizing product warranty liabilities, actual costs incurred in the future are O recorded as an operating expense. O not recognized, as the expense was recorded at the time of the sale. O offset against the liability that was recognized at the time of the sale. O disclosed in the notes to the financial statements as they are incurred. Look through any online paper you want (see examples below) and from the news, list 3 business ideas that you can see people might need! In your submission, for EACH idea: 1. Give the link to the online news article 2. Describe what the need is (1 or 2 sentences enough) 3. Briefly state a business opportunity that you can identify to service this need or issue (a) Solve the following system using the Gauss-Jordan method. 2x -y +z = 3 x+y+2z = 3 x-2y-z = 0 (b) Solve the following two systems using matrix inversion. 2c+y=1 7x + 4y = 2 2x+y=2 7x + 4y = 1 which of the following statements is true with respect to red bull's efforts to establish integrated marketing communications? analyze the progressive achievements roosevelt highlights in his speech E. Coli is a type of bacterium. Its concentration, P parts per million (PPM), is of interest to scientists at a particular beach. Over a 12 hour period, t hours after 6 am, they found that the PPM could be described by the following function: P(t) = 0.1 +0.05 sin 15t where t is in hours. (a) Find the maximum and minimum E. Coli levels at this beach. (b) What is the level at 3 pm? How positively or negatively does a business owner and theseissues (Leadership, Diversity and Motivation) affect yourbusiness?What aspects do you apply in your work on these issues? Decompose v into two vectors, v1 and v2, where v1 is parallel to w and v2 is orthogonal to w.v = i - j, w = -i + 2j sales agent abigail represented jeanette in the sale of her first home. now, abigail is working with jeanette as a customer to buy a home that is listed by abigail's brokerage firm. abigail knows information about jeanette's financial condition that will affect the seller's decision to accept jeanette's offer. abigail learned of jeanette's finances when representing her in the sale of her home. what is abigail's duty to disclose the information to the seller? Find the length of the path r(t) = 7 ND No No 3 7+2 3 2+2 from t = 1 to t = 3. 1