A capacitor is constructed of two large, identical, parallel metal plates separated by a small distance d

a. True
b. False

Answers

Answer 1
i think its true i dont kno for sure

Related Questions

A string with a length of 7.25 m is fixed at both ends. If the string is plucked so that there are five nodes along the string in addition to those at either end, what is the wavelength of the interfering waves for this mode?

Answers

Answer:

the  wavelength of the interfering waves for this mode is 2.4168

Explanation:

The computation of the wavelength of the interfering waves for this mode is shown below:

Given that

The length is 7.25m

And, the number of nodes is 6

So, the wavelength should be

= 2 × 7.25m ÷ 6

= 2.4168 m

Hence, the  wavelength of the interfering waves for this mode is 2.4168

The same would be considered

How does mass differ from weight? List 2 differences.

Answers

weight is vector vary from place to place

Answer:

The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass.

Explanation:

Mass is the measure of the amount of matter in a body. Mass is denoted using m or M. ... Weight is mass multiplied by the acceleration of gravity (g).

state the Newton 2nd law of motion and also prove that F= ma

Answers

Explanation:

F = ma is the formula of Newton's Second Law of Motion. Newton's Second Law of Motion is defined as Force is equal to the rate of change of momentum. For a constant mass, force equals mass times acceleration.

...

State five uses of bases.​

Answers

Answer:

Sodium hydroxide is used in the manufacture of soap. It is used in petroleum refining; in making medicines, paper, pulp, etc. It is used in making rayon. Calcium hydroxide is also known as slaked lime. It is used to neutralize acid in water supplies; in the manufacture of bleaching powder; as a dressing material for acid burns; as an antidote for food poisoning.Ammonium hydroxide is used to remove ink spots from clothes and to remove grease from window-panes. It is used in the cosmetic industry. Alkalis are used in alkaline batteries. Generally, potassium hydroxide is used in such batteries.Strontium hydroxide(Sr(OH)2) is used in the food industry for the refining of beet sugar.

What is the change in internal energy if 30 J of heat are released from a
system and the system does 50 J of work on its surroundings?
Use AU= Q-W.

Answers

Answer:

Option B. –80 J

Explanation:

From the question given above, the following data were obtained:

Heat (Q) released = –30 J (negative sign because the heat is being released to the surrounding)

Work (W) = 50 J

Change in internal energy (ΔU) =?

We can obtain the change in the internal energy as follow:

ΔU = Q – W

ΔU = –30 – 50

ΔU = –80 J

Therefore, the change in the internal energy is –80 J

Thus, option B gives the correct answer to the question.

Biologists use optical tweezers to manipulate micron-sized objects using a beam of light. In this technique, a laser beam is focused to a very small-diameter spot. Because small particles are attracted to regions of high light intensity, the focused beam can be used to "grab" onto particles and manipulate them for various experiments. In one experiment, a 10 mW laser beam is focused to a spot that has a diameter of 0.62 μm.
a. What is the intensity of the light in this spot?
b. What is the amplitude of the electric field?

Answers

Answer:

The correct answer is:

(a) [tex]3.31\times 10^{10} \ \omega/m^2[/tex]

(b) [tex]5\times 10^6 \ N/C[/tex]

Explanation:

The given values are:

Power of Laser beam,

= 10 mW

on converting it, we get

= [tex]10\times 10^{-3} \ \omega[/tex]

= [tex]10^{-2} \ \omega[/tex]

Spot's diameter,

= 0.62 μm

= [tex]0.62\times 10^{-6} \ m[/tex]

Now,

(a)

The intensity of light will be:

⇒ [tex]I=\frac{P}{\pi r^2}[/tex]

or,

⇒    [tex]=\frac{4P}{\pi d^2}[/tex]

On substituting the values, we get

⇒    [tex]=\frac{4\times 10^{-2}}{\pi(0.62)^2\times 10^{-12}}[/tex]

⇒    [tex]=3.31\times 10^{10} \ \omega/m^2[/tex]

(b)

The amplitude of electric field will be:

⇒ [tex]I=\frac{1}{2}\epsilon_0E_0.C[/tex]

or,

⇒ [tex]E_0=\sqrt{\frac{2I}{CE_0} }[/tex]

On substituting the values, we get

⇒       [tex]=\sqrt{\frac{3.31\times 10^{10}\times 2}{3\times 10^8\times 8.85\times 10^{-12}} }[/tex]

⇒       [tex]=5\times 10^6 \ V/m[/tex]

How do you make camping fun?​

Answers

Go out on hikes, have a fire, do s’mores stuff like that I love camping:)

A box slides to the right across a horizontal floor. A person called Ted exerts a force T to the right on the box. A person called Mario exerts a force M to the left, which is half as large as the force T. Given that there is friction f and the box accelerates to the right, rank the sizes of these three forces exerted on the box.

a. f < M < T
b. M < f < T
c. M < T < f
d. f = M < T
e. It cannot be determined.

Answers

Answer:

a. f < M < T

Explanation:

Let us take the right direction as positive.

Since Ted exerts a force T to the right his force is +T, Mario exerts a force M to the left, his force is -M. It is also given that Mario's force is half of Ted's force, so M = T/2. Finally, the frictional force , f is to the left, so it is -f. Let the net force be F and it is to the right since the box moves to the right.

So, +T - M - f = +F

Substituting M = T/2, we have

+ T -T/2 - f = F

+ T/2 - f = F

+T/2 = F + f

So, T = 2(F + f) and

M = T/2 = F + f

Since T = 2(F +f) = 2M, It follows that T > M

Also, since M = F + f, it follows that M > f

So, T > M > f ⇒ f < M < T

So, the answer is a.

The first version of a product, which is built and tested during the third stage of technological design, is called a​

Answers

Answer:

Prototype

Explanation:

It's correct on Edge

The first version of a product, which is built and tested during the third stage of technological design, is called a​ prototype

What are the stages of technological design?

There are mainly five stages of the technological design

Identifying the issue that needs to be solved is the first step in every problem-solving process.

The second stage is to imagine; during this phase, a designer would generate several concepts and conduct research on potential creations. They must pick a handful of their greatest concepts and then narrow it down to the best.

The third stage plans the imaging stage's selected product. In this process, the product is designed and drawn in order to be made into a model or prototype while taking into account the limitations that must be overcome.

The fourth step entails assessing, testing, and revising the final product. By creating a model or prototype of their product, the designer may decide what they like and what they could modify. This is found through product testing. If changes are necessary, the designer will go through the process again until they are happy with the outcome.

The fifth step is to share your solution. You present your solution to get feedback, exchange ideas with others, and improve your product. After you've gone through the design process a few times, you might decide to reveal your response to a larger audience in later phases. Similar modifications are made to homework by World of Inquiry students before they deliver it during an excursion.

Thus,a prototype is the initial iteration of a product that is constructed and tested during the third stage of technological design.

Learn more about technological design here

brainly.com/question/2028919

#SPJ2

A wave travels at a constant speed.How does the frequency change if the wavelength is reduced by a factor of 3 The frequency decreases by a factor of 3 the frequency increases by a factor of 3 the frequency increases by a factor of 9 the frequency does not change

Answers

Answer:

The frequency increases by a factor of 3.

Explanation:

The relation between speed, wavelength and frequency of a wave is given by :

[tex]v=f\lambda[/tex]

or

[tex]f\propto \dfrac{1}{\lambda}[/tex]

A wave travels at a constant speed. If the wavelength is reduced by a factor of 3, it would mean that the frequency increases by a factor of 3 because there is an inverse relationship between wavelength and frequency.

HELP PLZ 50 POINTS SPACE QUESTION
Explain how tilt results in varying sun angles that affect temperature

Answers

During the winter, the Northern Hemisphere tilted away from the sun, receiving solar radiation at more of an angle. This results in colder temperatures and more extreme temperature changes.

(1) Expansion of concrete
A section of concrete which is 50 meters long experiences a temperature change from -10 Celsius to 46 degrees Celsius. What is the expansion of the concrete?
(2) Stainless steel
A rod of stainless steel (Austenitic) of mass 20 kg has 12057984 Joules of heat added to it. It’s initial temperature is 22 degrees Celsius. The original length is 1 meter.
a. What is the expansion of this rod?
b. Does it melt?
c. What is the final color?
(3) Mystery metal
A rod of some metal is measured to be .6 meters at room temperature (23 Celsius). It is then heated to 99 Celsius and then its length is measured to be .600664. Given the table of expansion coefficients below what type of metal is it? (all numbers in chart are multiplied by 10-6)

material expansion coefficient
silver 19
gold 14.2
indium 33
brass 18
bronze 17.5

Answers

Abcdefghijklmnopqurtuv

A uniform 40-N board supports two children weighing 500 N and 350 N. If the support is at the center of the board and the 500-N child is 1.5 m from its center, How far is the 350-N child from the center
Determine the upward force exerted on the board?

Answers

Answer:

2.14 m

Explanation:

2.14m if it is write thank me hitting the heart ❤️ I took a lot of time to solve

Mu
wann-A
Very Short Answer Type Questions
1. Name the nutrients present in our food which give mainly energy to our body.
2. Name the nutrient which is needed for the growth and repair of our body. Proteins
3. Name the main carbohydrate which we eat in our food. I heat Rica maizes Pearl Potato
4. Which carbohydrate is present in wheat, rice and potatoes ? Plants
5. Name two foods each rich in (a) fats, and (b) starch. Batterheen
6. Name the major nutrients in our food.Combshed soles Fats Rooten mineral water Vitamin
7. Name the vitamin which is required for maintaining good eyesight Witamin A
8. Name the vitamin which keeps the teeth, gums and joints healthy, and helps fight diseases. 14
9. Name the vitamin which is necessary for the normal growth of bones and teeth Wermico
10. Which vitamin is produced in the human body when skin is exposed to sunlight ? uamu-D
11. Name the main vitamin present in (a) oranges, and (b) carrots. Worthing
12 Name an important mineral present in (a) apple, and (b) sea-fish.
13. Which mineral is needed to make haemoglobin present in our red blood cells.
14. In addition to calcium, which other mineral is needed for making bones and teeth ? (chum, Pha
15. Name a mineral which is needed for keeping bones and teeth healthy.
16. Which mineral is needed for the proper functioning of thyroid gland ?
17. Name two food materials which contain a lot of water. Fresh forest
18. Name the component of our food which helps prevent constipation. bulk oftend, wollte man
Vegetable
19. What is the other name of roughage? Dletary Abu
29Which component of food is mainly made of indigestible carbohydrate 'cellulose'?
21. The examples of carbohydrates are : sugar, cellulose, glucose and starch. Which of these carbohydrate
provides roughage in our food ?
22. Name two components of food which do not provide any nutrients.Cellulog
23. Fill in the following blank with a suitable word :
Iron is an important constituent of.........present in our blood. Hemoglobin
Short Answer Type Questions
24. What is the function of fats in our body? Name​

Answers

1. carbohydrates, proteins, fats, vitamins and minerals.

2. blood and muscle cells

3. fructose, glucose, and lactose)

4. Fiber and protein

5. Avocados and potato

6. carbohydrates, proteins, fats, vitamins and minerals.

7.vitamin A
8. Vitamin C
9.vitamin D
10. Vitamin D
11.vitamin C
12. calcium, potasium and phosphorus.
13. myoglobin and iron
14.Vitamin D
15.calcium
16.Lodine
17. Cucumber tomato
18. Fiber
19.dietary fibers
20.starch and sugars
21. I don’t know
22.roughaghe and water

Explain how the forces need to change so the aeroplane can land

Answers

When an airplane is flying straight and level at a constant speed, the lift it produces balances its weight, and the thrust it produces balances its drag. However, this balance of forces changes as the airplane rises and descends, as it speeds up and slows down, and as it turns.

The explanation with regard when the forced are required to changed is explained below:

In the case when an airplane is flying straight and level at a constant speed, the lift it generated balances its weight, and the thrust it produces balances its drag. But this balance of forces changes because the airplane rises and descends, also it speeds up and slows down, and it turns.

Learn more: brainly.com/question/16911495

One way to conserve energy is to replace incandescent light bulbs with compact fluorescent bulbs. The fluorescent bulb typically uses 25% of the energy of an incandescent bulb of comparable brightness typically lasts about 12 times longer. a)How much would you save by replacing a 100-watt incandescent bulb with a compact fluorescent bulb over the 12,000 hour lifetime of the bulb if the electricity cost 0.08$ per kwh (kilowatt hour)

Answers

Answer:

     cos to = $ 24

Explanation:

When replacing the bulb only 25% of the energy is used, therefore

          W = 0.25 100

          W = 25 W

Let's look for the energy in the life of the bulb

          E = 25 10⁻³ 12000

          E = 300 Kwh

now we can calculate the cost using a direct proportion rule.

          Cost = 0.08 300

          cos to = $ 24

Using a force of 12.0 Newtons, a student pulls a 50.0 Newton weight along the tabletop for a distance of 10.0 meters in
4.0 seconds. Compute the power developed by the student.
Remember to include your data, equation, and work when solving this problem

Answers

Answer:30watt

Explanation:  Force applied by student F = 12 N

Displacement s = 10 m

Time t = 4 s

Work done W = Fs

Power P = W/t = Fs/t

= 12 * 10/4 Watt

= 30 Watt

The power developed by the student is 30 Watt.

To find the value of power the given values are,

Force applied by the student F = 12 Newton,

Distance s = 10 meters,

Weight pulled by the students = 50 Newton,

Time t = 4 seconds.

How work done and power are related to one another?

Work done:

  The product of displacement of an object and the component of the applied force which is in the direction of the object's displacement is said to be Work done.

      It's unit is kg⋅m²⋅s⁻² or Joules.

  Work done W = Force ( F ) × Distance ( S )

                          = 12 × 10

                          = 120 J.

Power:

  Power can be defined as the ratio of work done to time interval.

                 [tex]P = \frac{W}{\Delta t}[/tex]

 It's unit is Watt.

  Power , P = 120 / 4

                P = 30 Watt.

Thus, the power developed by the student is 30 watt.

Learn more about Power,

https://brainly.com/question/1962126

#SPJ2

What is magnetic flux?​

Answers

Answer:

plz follow me

Explanation:

ougffgegehhehe

Which of the following is not a characteristic of electrical potential energy?

Answers

Answer:

It is a form of mechanical energy

Explanation:

Hydrogen gas is maintained at 3 bars and 1 bar on opposite sides of a plastic membrane which is .3 mm thick. The temperature is 25C, and the diffusion coefficient of hydrogen in the plastic at 25C is 9x10-8 m2/s. The solubility of hydrogen in the plastic membrane is 1.5x10-3 kmol/m3. What is the mass diffusive flux (in kg/m2.s) of hydrogen on the membrane

Answers

Answer:

[tex]N_a=1.8*10^{-6}kg/sm^2[/tex]

Explanation:

From the question we are told that:

Thickness of plastic membrane [tex]L_t=0.3mm[/tex]

The temperature of hydrogen [tex]T_h=25 \textdegree C[/tex]

Diffusion coefficient of hydrogen in the plastic [tex]25 \textdegree C \mu=9*10-8m2/s[/tex]

The solubility of hydrogen in the plastic membrane [tex]\+x=1.5*10{-3} kmol/m3[/tex]

Generally the equation for molar conc is mathematically given by

[tex]CA_1=x*bar[/tex]

3bars

[tex]CA_1=1.5*10^{-3}*3[/tex]

[tex]CA_1=4.5*10^{-3}kmol/m^3[/tex]

1bar

[tex]CA_1=1.5*10^{-3}*1[/tex]

[tex]CA_1=1.5*10^{-3}kmol/m^3[/tex]

Generally the equation for molar diffusion flux of Hydrogen N_a is mathematically given by

[tex]N_a=\frac{D{AB}}{\L}(CA_1-CA_2)[/tex]

[tex]N_a=\frac{9*10^{-8}}{0.3*10^-^3} (4.5*10^{-3}-1.5*10^{-3})kmoi/m^-3[/tex]

[tex]N_a=9.*10^{-7}kmol/sm^2*2kh/kmole[/tex]

[tex]N_a=1.8*10^{-6}kg/sm^2[/tex]

1. Compared to sadness, depression:
a. Is more common
b. Lests longer
c. Has fewer symptoms
d. Is easier to recognize

Answers

the answer should be B - lasts longer.
B - it lasts longer

Which sentence in the passage can be used to conclude that Eris is a dwarf planet and not a planet?
Erls takes about 557 Earth years to orbit the Sun. It has a mean surface temperature of about 40 Kelvin. It has a nearly spherical shape. It has
several other objects in its orbit, though
few are as massive as itself. Eris is too far away and small to be clearly visible from the Earth. Scientists
used its moon, Dysnomla, to measure it Qris is believed to be slightly more massive than Pluto. However, both of them are smaller than Earth's
Moon. Eris orbits the Sun directly, it is not a satellite of another planet or dwarf planet.

Answers

I

think

Answer:

is.......

it has several other objects in its original, though few are as massive as itself........

Answer:

my teachers have always taught me that a dwarf planet cannot have other objects in its orbit seeing that the gravitational force will make it collide with the planet or push it out of the orbit. hope it helps xx

Q1. Which statement is correct
a) Distance and Displacement are the same thing
b) Distance is displacement with direction added
c) Displacement is distance with direction added
Q2. Which statement is true
a) The magnitude of distance and direction must always be the same
b) Distance can be less than displacement
c) Displacement is always the shortest distance between two points
d) Distance follows the exact path while displacement is the straight line distance between starting and ending position​​

Answers

Answer:

C

D

Explanation:

In a direct current motor, what is the result of the magnetic field acting on the wire

Answers

Answer:

Because the magnetic field created by the electric current in the wire is changing directions around the wire, it will repel both poles of the magnet by bending away from the wire.

Explanation:

HELP WITH SCIENCE STAAR QUESTIONS

Answers

Answer:

EASY PEASY LEMON-SQUEEZY.

Explanation:

B

Mark Brainliest.

SOMEONE HELP PLEASE I ASKED THIS TWICE LAST NIGHT I MEAN DAM!! You drop a water balloon from a second-story window. Which formula would you use to calculate the velocity of the water balloon just before it hits the ground, assuming it is in free fall?
A. v=g/t B. v=get C. g=vt D. t=vg​

Answers

Answer:

I think it would be V=g/t

The molecules in the rods and cones in the eye are turned to absorb photons of particular energies. The retinal molecule, like many molecules, is a long chain. Electrons can freely move along one stretch of the chain but are reflected at the ends, thus behaving like a particle in a one-dimensional box. The absorption of a photon lifts an electron from the ground state into the first excited state. Do the molecules in a red cone (which are turned to absorb red light) or the molecules in a blue cone (tuned to absorb blue light) have a longer "box"?

Answers

Answer:

The answer "[tex]E_{red1} < E_{blue1}[/tex] can include that is  [tex]L_{red} > L_{blue}[/tex]".

Explanation:

In this scenario, when we take the expression [tex]E_n =\frac{1}{2m}(\frac{hn}{2L})^2[/tex]  that is the energy of the inversely  proportional to the length of the box. because[tex]E_{red1} < E_{blue1}[/tex] it could be include  that is [tex]E_{red1} < E_{blue1}[/tex]  because [tex]E_{red1} < E_{blue1}[/tex] which can include [tex]E_{red1} < E_{blue1}[/tex].

How does clothing and body language affect a job interview?

Answers

Answer:

please give me brainlist and follow

Explanation:

Whilst first impressions can be important, your body language during the interview can make or break your overall performance. With experts saying that between 75-90% of communication is non-verbal, it is important to think about what your body is saying about you during an interview.

Question
A car is moving on a flat roadway, What can be said about this system
A. The Kecan change there is no conservation of energy
B. It is not an isolated system because the car moves,
c. The law of conservation of energy applies,
O D. There is no PE, so no conservation of energy.

Answers

C is the only right answer in this

what is magnetic flux thru a closed surface

Answers

Answer: Zero

Explanation:

Gauss's law states that the total magnetic flux through a closed surface is equal to zero. Because the magnetic field lines are in continuous loops, so all closed surfaces have magnetic field lines coming out, hence the net magnetic flux is zero.

Other Questions
What did workers do to improve their work conditions?B. Formed trade unionsA. Created FactoriesC. Held StriesD. Survived Famines An advantage of participant over nonparticipant observation is _____________ a. the observer may lose the objectivity needed to conduct the scientific observation b. the researcher may be able to experience events in the same way as natural participants c. it is always a more ethical research approach than nonparticipant observation d. the conclusions lack objectivity Refer to the passage."Urbanisation undermines caste. The relative anonymity of an individuals identity in a city makes it difficult for rules of purity and pollution to be observed and enforced in the public sphere.Fewer activities are then mediated by an individuals caste identity. And urbanisation will continue to increase. By 2030, 40 per cent of Indians are predicted to live in urban areas.The urban middle class, once a preserve of the upper castes, has become more diverse with gradual entry of backward castes and Dalits.The marriage market reflects this change. In 1970, only 1.5 per cent of matrimonial ads published in the national dailies belonged to backward castes and Dalits. This number had increased to 10 per cent by 2010.In cities, the search for partners differs from that in villages. People in the middle class shift from family and caste networks to friends and professional networks, and rely on technology. Already 250 million Indians own smartphones.Excerpt from "Caste and Marriage in Urban Middle-Class India by Amit Ahuja, 2016How has the caste system in rural Indian areas adapted to globalization differently than the caste system in urban areas?- Rural areas have been unaffected by globalization because of their isolation.- Rural areas have changed the most socially, as globalization has led to an adoption of Western culture.- Rural areas have been slower to adapt socially to the changing global society, as technology and industrialization have had less impact.- Rural areas have seen a greater weakening of the caste system, as many people from lower castes have moved to urban areas in search of work. what is a counter claim for racism (for an essay) Discusstheimportanceofbackingupdatainorganizations,pointingoutthebenefitsofcloudbackupoption the two sentences that contain both a dependent and an independent clause into the box below. After school got out, the teachers held a meeting. While the teachers met, the school board talked with the principal. The board members voted to build a new library. The parents were excited, but the students were very happy. The principal made the announcement, and he told the local newspapers about the new library. If you wanted to put a fence around your garden, would you find the perimeter or the area of the garden?? Ed stands on a moving walkway and gets from one end of the walkway to the other in 20 seconds. The walkway is 44 feet long. Which statements are true? Every 8 seconds, Ed travels 32 feet. Ed travels 11 feet every 5 seconds. Ed travels 2.2 feet per second. Ed travels 0.9 of a foot every 2 seconds. Every 10 seconds, Ed travels 22 feet. Ill give points + brainalist, btw you might need to look up the whole story by yourself but Ill give a little bit with the picture (: Please helpppppp will give brainliest!!!!!!! 2. What is the use of the percent sign (6) and underscore in the LIKE clause? How do they differ inoperation and production of a report? The classification of some organisms has changed. Which new process is used to reclassify organisms?A. Organisms are now given Latin-based scientific names.B. Structures are now examined at the molecular level.C. Organisms are now divided into three kingdoms.D. Structures are now used to classify organisms. Need some answers with this question Does anyone know the answer to question 6? Read the excerpt from Act III of Julius Caesar.Announcer 1: The crowd, which loved Pompey and then Caesar and now Brutus, waits to hear Antony speak.Citizen 1: (With conviction) This Caesar was a tyrant.Citizen 3: Nay, that's certain. We are blessed that Rome is rid of him.Citizen 2: Peace, (He sees Antony trying to quiet them.) let us hear what Antony can say.Announcer 2: Antony begins by stating he will only bury his friend, not say how good he was.Antony: (Sadly) Friends, Romans, countrymen lend me your ears. I come to bury Caesar, not to praise him. The noble Brutus hath told you Caesar was ambitious. (He sighs.) If it were so, it was a grievous fault, and grievously hath Caesar answered it.(He sighs again, and the citizens begin to feel uncertain about the "if'') He was my friend, faithful and just to me. But Brutus says he was ambitious, and Brutus is an honorable man. (With grief) When that the poor have cried, Caesar hath wept! (Sarcastically) Yet Brutus says he was ambitious, and Brutus is an honorable man.Announcer 1: Antony then makes his main point - the crowd saw Caesar refuse the crown three times.Antony: You all did see that on the Lupercal I thrice presented him a kingly crown, which he did thrice refuse. Was this ambition? (The citizens shake their heads.) Yet Brutus says he was ambitious, and sure, he is an honorable man. (By now the citizens exchange worried looks, as the facts do not make sense.)(Pointing to Caesar's corpse) You all did love him once, not without cause. (He wipes tears from his face.) Bear with me. My heart is in the coffin there with Caesar, and I must pause till it come back to me. (He covers his face with his robe.)Citizen 1: (Unhappily) Methinks there is much reason in his sayings.Citizen 2: (Shocked) Caesar has had great wrong.Citizen 4: Marked ye his words? He would not take the crown, therefore, 'tis certain he was not ambitious. (The others agree.)How does Antony's speech change the viewpoint of the citizens?They realize that Caesar should not have been murdered and Brutus misled them.They understand that Brutus was telling the truth about Caesar's ambition.Antony reminds them that Brutus is a good person, and only wants what is best for Rome.Their love for Caesar is gone, and they are convinced that Antony should be the next emperor. Write a story that deals with a character recovering from a tragic loss due to drug addiction. ILS.Carnival visitors507090110130150What fraction of the days did the carnival have 70 or fewer visitors?Submit Silver sulfate dissociates into silver ions and sulfate ions:Ag2SO4(s) = 2Ag+ (aq) + SO42- (aq)Which of the following equations is the equilibrium constant expression forthis reaction?A. Kot[Ag+][80.21[Ag 2504)O B. Ko = [Ag+ 12 [5042")[A92504)O C. KE =[Ag+1?[s042-7O D. KG[A92504[Ag+ ][5042-) Solve the system of equations and choose the correct answer from the list of options. d + e = 15 d + e = 5 Label the ordered pair as (d, e). (4 points) Question 3 options: 1) (0, 0) 2) (10, 5) 3) (5, 10) 4) (10, 5) What kind of ticket a passenger needs to buy if he is coming back?