The density of the metal beads, given that total mass of the metal plus alcohol in the flask was determined to be 38.6794 g is 3.22 g/mL
How do I determine the density of the metal beads?We'll begin by obtaining the density of the alcohol in the flask with the metal beads. This is illustrated below:
Mass of alcohol = 19.7325 gVolume of alcohol = 25 mLDensity = ?Density = mass / volume
Density of alcohol = 19.7325 / 25
Density of alcohol = 0.7893 g/mL
Next, we shall determine the volume of the alcohol in the 25 mL flask. This can be obtained as follow:
Density of alcohol = 0.7893 g/mLMass of metal beat = 25.1060 gTotal mass of metal beat and alcohol = 38.6794 gMass of alcohol in flask = 38.6794 - 25.1060 = 13.5734 gVolume of alcohol in flask =?Volume = mass / density
Volume of alcohol in flask = 13.5734 / 0.7893
Volume of alcohol in flask = 17.2 mL
Finally, we shall determine the density of the metal beads. Details below:
Mass of metal beat = 25.1060 gVolume of alcohol in flask = 17.2 mLVolume of flask = 25 mLVolume of metal beads = 25 - 17.2 = 7.8 mLDensity of metal beads =?Density = mass / volume
Density of metal beads = 25.1060 / 7.8
Density of metal beads = 3.22 g/mL
Thus, we can conclude that the density of the metal beads is 3.22 g/mL
Learn more about density:
https://brainly.com/question/952755
#SPJ1
Complete question:
A calibrated flask was filled to the 25.00 mL mark with ethyl alcohol. By weighing the flask before and after adding the alcohol, it was determined that the flask contained 19.7325 g of alcohol. In a second experiment, 25.1060 g of metal beads were added to the flask, and the flask was again filled to the 25.00 mL mark with ethyl alcohol . The total mass of the metal plus alcohol in the flask was determined to be 38.6794 g. What is the density of the metal in g/mL?
What causes pressure inside a helium balloon?
OA. The helium atoms exert an electrostatic force that pushes the
surface outward.
OB. The helium atoms expand and press on the surface of the balloon.
OC. The helium atoms bounce off the surface as they move inside the
balloon.
OD. The helium atoms stick to the surface of the balloon and increase
its weight.
Pressure inside a helium balloon: The helium atoms expand and press on the surface of the balloon.
What is helium balloon?Helium balloons are a type of balloon filled with helium gas. Helium is a light, non-flammable, inert gas that is found in abundance in the atmosphere and is used to inflate balloons. Helium balloons are often used in decorations, promotions, special events, parties, and displays. They come in a variety of shapes, sizes, and colors, and can be filled with helium and released into the atmosphere, creating a festive atmosphere. Helium balloons are also used in scientific experiments, such as measuring wind speeds, studying atmospheric pressure and air movement, and measuring the temperature of the atmosphere.
To learn more about helium balloon
https://brainly.com/question/29311706
#SPJ1
I need some chemistry help
Thank u
H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation
What is a thermochemical equation mean?Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.
How is a thermochemical process expressed in writing?A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.
To know more about Thermochemical equation visit:
brainly.com/question/2874342
#SPJ1
How many grams of zinc metal will be produced by treating 54. 0 grams of
aluminum with a solution of zinc chloride, ZnCl,?
(A:196 g Zn)
By treating 54.0 grams of aluminum with a solution of zinc chloride, ZnCl, 328.6g/mol of zinc metal will be created.
The definition of molar mass.The molar mass of a substance is its mass expressed in grams per mole. As shown in this video, the molar mass of a substance can be calculated by adding the molar masses of the substance's component atoms. The number of moles in the substance can then be calculated from its molar mass and converted to mass.
Balance chemical reaction,
2Al + 3ZnCl₂ → 2AlCl₃ +3Zn
Molar mass of aluminum is 27.99g/mol
Molar mass of zinc chloride is 136.29g/mol
The mole ratio of ZnCl₂ to Al is 3:2
Grams → moles → moles → grams
45Al × 1mol Al/27.99g Al × 3 mol ZnCl₂/2 mol Al × 136.29 g ZnCl₂/1 mol ZnCl₂
on simplification,
45×3×136.29/27.99×2 = 328.6g/mol.
To know more about molar mass visit:
https://brainly.com/question/12127540
#SPJ4
1. isostasy subduction 2. deepest ocean depths fjord 3. drowned glaciated valley plate tectonics 4. theory of crustal structure trench 5. oceanic plate going down buoyancy
The isostasy is relates to the buoyancy , the deepest oceans depths relates to the trench, the theory of the crustal structure relates to the plate tectonics.
The match the following for the given options are given below as follows :
1 ) isostasy buoyancy
2) deepest ocean depths trench
3) drowned glaciated valley fjord
4) theory of crustal structure tectonic plates
5) oceanic plate going down subduction
The above are the correct order for the given following relations. these given options are related to the earth movement. like isostasy is the rising or the settling of the part of the earth's lithosphere.
To learn more about tectonic plates here
https://brainly.com/question/998575
#SPJ4
10. What would the new concentration be, in percentage, of 1.5 ml of a 10% solution that has been increased with normal saline to 3.0 ml
The 1.5 ml of a 10% solution that was made into a 3.0 ml solution by adding normal saline now has a new concentration of 5%.
The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.
By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ4
colour of anhydrous copper II sulphate
Answer:
White color
Explanation:
This compound when heated losses its water of crystallization and become anhydrous copper sulphate
The overall charge of an atom or ion is ________ if the number of electrons is ________ than the number of protons.
The overall charge of an atom or ion is negative if the number of electrons is greater than the number of protons.
What is electron?A subatomic particle with a negative charge is called an electron. It is found outside the nucleus of an atom and is one of the main constituents of matter. Electrons are responsible for the chemical properties of atoms and thus play an important role in chemical reactions. Electrons have low mass and move around the nucleus at relativistic speeds. They are also responsible for the electrical and magnetic properties of atoms, and for the transmission of light and other forms of energy. Electrons can also interact with other particles and form complex structures, such as molecules.
To learn more about electron
https://brainly.com/question/26084288
#SPJ4
3. Magnesium is a metal.
a. Describe the structure and bonding in magnesium.
b. Why can magnesium conduct electricity when solid?
c. Why is magnesium malleable?
Yes, magnesium is a metallic element and is a member of the alkaline earth metals group.
What is Magnesium?
Magnesium is a chemical element with the symbol Mg and atomic number 12. It is a silvery-white, highly reactive metal that is essential for many biological processes. Magnesium is the eighth most abundant element in the Earth's crust and the fourth most abundant element in the human body.
It is an important component of many enzymes, proteins, and other molecules. Magnesium is found naturally in many foods, including green vegetables, nuts, and grains. Magnesium plays a role in maintaining normal muscle and nerve function, keeping a healthy immune system, regulating blood sugar levels, and helping to form strong bones.
To learn about more Magnesium.
brainly.com/question/25860912
#SPJ1
The isotope of iodine with mass number 128 undergoes beta decay with a half-life of 25.00 minutes. The balanced nuclear reaction for this process is:
Beta decay occurs with a half-life of 25 minutes for the iodine isotope with mass number 128. For this procedure, 3→Te + iB is the balanced nuclear reaction.
Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei) and position in the periodic table (and, therefore, belong to the same chemical element). However, isotopes have different nucleon numbers (mass numbers) because they have varying numbers of neutrons in their nuclei. All isotopes of a given element have nearly identical chemical properties, but they differ in terms of atomic mass and physical characteristics.
The word "isotope" is derived from the Greek words isos, which means "equal," and topos, which means "place," meaning "the same location." The name refers to the fact that different isotopes of the same element occupy the same spot on the periodic table.
Learn more about isotope here:
https://brainly.com/question/12955625
#SPJ4
A nurse is caring for a client who has a serum potassium level of 3.1 mEq/L. Which of the following actions should the nurse take first?
A) Obtain an ECG.
B) Administer oral potassium
C) Encourage potassium-rich foods
D) Monitor I & O
To solve this we must be knowing each and every concept related to potassium level. Therefore, the correct option is option A that is Obtain an ECG.
What is potassium level?This condition is known as hyperkalemia, or excessive potassium. The Mayo Clinic states that the potassium level in blood should be between 3.6 to 5.2 millimoles a liter (mmol/L).
Critically high potassium levels are those over 5.5 mmol/L, while levels above 6 mmol/L could be lethal. A nurse is caring for a client who has a serum potassium level of 3.1 mEq/L. She should Obtain an ECG.
Therefore, the correct option is option A that is Obtain an ECG.
To learn more about potassium level, here:
https://brainly.com/question/28312883
#SPJ1
Since carbon-14 decays at a steady rate, it is a reliable method to determine the age of rock samples. True False
The aforementioned claim is TRUE; as carbon-14 degrades steadily, it can be used to accurately estimate the age of rock samples.
Comment on carbon-14.The radioactive isotope of carbon 14 (14C) decays at a constant, well-known pace. Scientists can ascertain how long ago an organic substance died by calculating the quantity of 14C present in a sample of the material, such as bone or wood. This process, known as radiocarbon dating, is frequently used in geology and archaeology to date objects that are up to 50,000 years old.
Since carbon-14 decays steadily, it provides a trustworthy way to estimate the age of rock samples.
To know more about carbon-14 visit: https://brainly.com/question/4206267
#SPJ4
A gas has a pressure of 120 kPa, a temperature of 400 K and a volume of 50.0 mL. What volume will the gas have at a pressure of 60 kPa and a temperature of 200 K
The gas will have a volume of 25.0 mL at a pressures of 60 kPa or a temperature of 200 K.
What is temperature?The average kinetic potential of the particle in a system is measured by temperature. Temperature is measured using thermometers, which measure the temperature of a system by taking a reading of the system's average kinetic energy. Temperature is measured in degrees, with higher temperatures indicating a higher average kinetic energy. Temperature can be affected by a variety of factors, including the amount of energy added to or removed from a system, the number of particles present in the system, and the type of particles present in the system.
To learn more about temperature
https://brainly.com/question/2339046
#SPJ4
Which one of the following substances does not exist in the indicated solid type? Explain.
a. graphite - network
b. Na - metallic
c. SiO
2
- molecular
d. NaCl - ionic
e. diamond - network
The following substances does not exist in the indicated solid type : c.) SiO₂- molecular.
What type of solid is Si02?SiO2 is a covalent solid and the solid state of silicon dioxide (SiO2) is a covalent crystal with sharing of valence electrons between the silicon atom and oxygen atoms.
Silicon dioxide is a silicon oxide made of linear triatomic molecules in which silicon atom is covalently bonded to two oxygens. Silicon dioxide which is often called silica is the main compound found in sand.
Silicon dioxide is not soluble in water as the interaction between SiO2 and water molecules is not sufficient to overcome the strong and extensive covalent bonds in giant molecule.
To know more about SiO2, refer
https://brainly.com/question/966891
#SPJ4
Is 1g equal to 1 mol?
After the shuttle disaster, an unknown compound residue was removed from a piece of the debris. Upon analysis, it was found to contain 2. 61 g of carbon, 6. 09 g of nitrogen, and 1. 31 g of hydrogen. What is its empirical formula?
The empirical formula of the compound is C2N3H2.
What is an Empirical formula?
An empirical formula is a type of chemical formula that shows the simplest ratio of atoms in a molecule, rather than the total number of atoms. It is the simplest possible chemical formula that shows the relative numbers of each type of atom in a molecule.
This formula is determined by dividing the mass of each element by its atomic weight, and then dividing the result by the lowest of the results. The lowest result is 0.817 g/mol for carbon. This means that 2.61 g of carbon is equivalent to 3.17 moles of carbon. Thus, the ratio of elements in the compound is 3.17 moles of carbon, 7.44 moles of nitrogen, and 1.6 moles of hydrogen. Dividing each of these numbers by the lowest number (3.17) gives the ratio of 2 for carbon, 2.35 for nitrogen, and 0.5 for hydrogen. This ratio is simplified to 2:2:1, which corresponds to the empirical formula C2N3H2.
To know more about empirical formula,
https://brainly.com/question/13058832
#SPJ4
according to the department of transportation hazardous materials are defined as
Hazardous materials are substances or chemicals that pose a health hazard, a physical hazard, or harm to the environment.
What is hazardous materials?Weapons of mass destruction, as well as other matter or energy that have the potential to do harm to people, the environment, and property, when discharged.The EPA divides hazardous waste into three categories: listed, characteristic, and mixed radiological waste. Although there are numerous subclasses within each of these groups, the following are the broad groupings.Any cause of potential danger, harm, or negative health impacts on something or someone is a hazard. Basically, a risk is the potential for harm or a negative outcome (for example, to people as health effects, to organisations as property or equipment losses, or to the environment).A hazard is a potential source or circumstance that could cause harm to people or their health, damage to property, or harm to the environment.
To learn more about hazardous materials refers to:
brainly.com/question/27318175
#SPJ1
Identify the reactant, reagent, and solvent used to synthesize the alkyl lithium reagent shown. Reactant reagant --> solvent /\/\Li + LiBr
Identify the reagent. O 2 Li O CH3Li O LiOH
The reactant in the synthesis of the alkyl lithium reagent shown is an alkyl halide, likely represented by the structure //\Li + LiBr. The reagent used to synthesize the alkyl lithium reagent is lithium metal, represented by the structure O 2 Li.
The solvent used in the synthesis is not specified in the given information. It's common to use ethers such as diethyl ether or tetrahydrofuran as solvents in the synthesis of alkyl lithium reagents.It's worth noting that the structure O CH3Li is showing a methyl lithium reagent, which is a different compound than the alkyl lithium reagent shown in the first part of the question, and the structure LiOH is showing Lithium hydroxide which is not involve in the synthesis of alkyl lithium reagents.
Learn more about alkyl lithium here:
https://brainly.com/question/29751733
#SPJ4
For which d orbital(s) do the lobes point directly at the ligands in a square-planar crystal field? Check all that apply.
O dzy
O dz2
O dzz
O dzy y^2
O dyz
submit
The dz2 and the dx2-y2 orbitals have lobes that point directly at the ligands in a square-planar crystal field in d orbitals.
The d orbitals are a set of atomic orbitals found in the second energy level (n = 2) of an atom. They have a higher energy than the s and p orbitals in the first energy level (n = 1), and are represented by the letters d, dx, dy, dz and dxy, dxz and dyz.The d orbitals are composed of four orbitals which are degenerate (having the same energy) in an isolated atom. But when an atom is in a compound, the d-orbitals split into different energy levels due to the influence of the electrostatic forces of the neighboring atoms. This is called the crystal field splitting, which depends on the symmetry of the crystal and the coordination number of the central atom.
Learn more about atomic orbitals here:
https://brainly.com/question/29561958
#SPJ4
Are CO2 and O2 inversely related?
Yes carbon dioxide and oxygen are inversely related to each other.
Bohr effect is a result of the effect of carbon dioxide has on hemoglobin affinity for oxygen. Bohr's effect describes the hemoglobin's lower affinity for oxygen secondary to increases in the partial pressure of the carbon dioxide and decreases the pH of blood. This lower affinity, in turn, enhances the unloading of oxygen into the tissues to meet the oxygen demand of the tissue.
Thus, the relationship between CO₂ and hemoglobin affinity for oxygen can be described as an inverse relationship meaning when one goes one way, and the other goes the other way.
To know more about oxygen here
https://brainly.com/question/13370320
#SPJ4
what is a balanced nuclear equation for power generation?
A balanced nuclear equation for power generation by nuclear fission is given below:
²³⁵₉₂U + ¹₀n ---> ⁹²₃₆Kr + ¹⁴¹₅₆Ba + EnergyWhat is nuclear fission?The process of nuclear fission involves the splitting of an atom's nucleus into two or more smaller nuclei. Even by the energetic standards of radioactive decay, the fission process releases a very high quantity of energy and frequently results in gamma photons.
Nuclear fission is applied in nuclear power generation in a nuclear reactor.
The fissionable nuclear material is separated in the nuclear reactor so that a critical mass cannot exist, and the neutron flux and absorption are controlled to stop the fission reactions. The energy released during fission processes in a nuclear reactor used to generate electricity is trapped as thermal energy and used to heat water and create steam. The steam is utilized to turn a turbine, which powers an electricity-generating generator.
Learn more about nuclear fission at: https://brainly.com/question/3992688
#SPJ1
A coffee cup calorimeter is filled with 200. 0 mL of water at 22. 1°C. A piece of metal at 48. 6°
°
C with a mass of 5. 1 g is added. The final temperature of the water in the calorimeter is 26. 8°C. The density of liquid water is 1. 00 g/mL, and its specific heat capacity is 4. 18 J/(g°C). Determine the specific heat capacity of the metal
The specific heat capacity of the metal is 35.34 J/g/°C, if the specific heat capacity of the water is 4.18 J/g/°C.
Volume of water = 200 ml
Density of water = 1 gm/ml
So the mass of the water in coffee cup, m₁ = 200×1 = 200 gm
Initial temperature of water, T₁ = 22.1°C
Specific heat capacity of water, S₁ = 4.18 J/g/°C
Mass of the metal, m₂ = 5.1 gm
Initial temperature of the metal, T₂ = 48.6°C
Final combined temperature of both, T = 26.8°C
Let the specific heat capacity of the metal = S₂
Heat gain by the water = heat loss in the metal
S₁ × m₁ × (T-T₁) = S₂ × m₂ × (T₂-T)
4.18 × 200 × (26.8-22.1) = S₂ × 5.1 × (48.6-26.8)
3929.2 = S₂ × 111.18
S₂ = 3929.2/111.18
S₂ = 35.34 J/g/°C
So, the specific heat capacity of the metal is 35.34 J/g/°C.
To know more about specific heat capacity, here
https://brainly.com/question/29766819
#SPJ4
A sample of magnesium metal reacts with 45.0 mL of 3.0 M solution of hydrochloric acid. How many moles of HCl are reacting
moles of HCl are reacting is [tex]135\times10^{-3}[/tex]
In the International System of Units, the mole is used to measure material quantity. The number of a substance's elementary entities that are present in an object or sample depends on the amount of that substance. A solute's molar concentration is used to represent how much of a solute there is per unit volume of a solution or how much of a chemical species there is in a solution.
Magnesium reacts with hydrochloric acid to generate a salt of magnesium chloride and release hydrogen gas.
Mg(s) +HCl(aq) [tex]\rightarrow[/tex] [tex]MgCl_{2}[/tex](aq)+[tex]H_{2}[/tex](g)
molarity =[tex]\frac{moles of solute}{volume of solution \:(l)}[/tex]
molarity of Mg is 3.0M volume of solution is 45ml
now, 3M=[tex]\frac{moles of solute}{45\times 10^{-3} \:(l)}[/tex]
moles of mg = 135 millimoles.
now according to the reaction by using stoichiometry
moles of Mg = moles of HCl
moles of HCl =135 millimoles =[tex]135\times10^{-3}[/tex]
Learn more about moles.
brainly.com/question/26416088
#SPJ4
What is the theoretical yield of water in this test reaction?
The theoretical yield of water in this reaction is 1 mole (18.015 grams) of water.
What is theoretical yield?Theoretical yield is the amount of a product one would expect to yield from a reaction if it proceeds to completion, according to a balanced chemical equation. It is calculated by multiplying the limiting reactant by the molar ratio between the reactants and the products. The actual yield of a reaction is usually lower than the theoretical yield, due to a number of factors such as incomplete conversion of reactants to products, product losses, and impurities in the reactants. Theoretical yield is used to calculate the percentage yield of a reaction, which is the ratio of the actual yield to the theoretical yield multiplied by 100.
To learn more about theoretical yield
https://brainly.com/question/30068550
#SPJ4
Answer:
360.g water
Explanation:
What happens when ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty)?
please make it sound like i wrote it :(
When ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty), the denser water will sink to the bottom and the less dense water will rise to the top. This is known as stratification, and it helps to create distinct layers in the ocean.
This stratification can create an environment that is more conducive to life, as it allows different types of organisms to inhabit different layers of the ocean.
The different layers of the ocean created by stratification play a significant role in the global climate system. Colder, denser waters are usually found at the bottom of the ocean, while warmer, less dense waters are found near the surface.
This temperature difference creates a natural convection system that drives currents throughout the ocean, which helps to regulate temperatures on a global scale. Additionally, stratification can also affect the amount of oxygen in the ocean.
Learn more about density of the ocean:
https://brainly.com/question/28819040
#SPJ4
What volume of oxygen is needed to completely react with 171.9 g of S8 at STP?
S8(s) +1202(g) →8S03(1)
All chan
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, the volume of oxygen needed to completely react with 171.9 g of S8 at STP is 180.09L.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
S[tex]_8[/tex](s) +12O[tex]_2[/tex](g) →8SO[tex]_3[/tex](l)
171.9 g of S8
mole of S[tex]_8[/tex]= 171.9 g/ 256.52g/mol
=0.67mol
The mole of oxygen = 12×0.67
= 8.04mol
volume of oxygen= 22.4× 8.04
=180.09L
Therefore, the volume of oxygen needed to completely react with 171.9 g of S8 at STP is 180.09L.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
What happens as you move down and to the left on the periodic table?
Travelling from left to right through a period of such a periodic table reduces the size of both atom.
Traveling from left to right inside a period of such periodic table causes the size of the atom to shrink. The number of protons and the positive nuclear energy both rise with such an increasing in the atomic number. The diameter of the atom shrinks as the nucleus draws the outermost electron.
Since they are eager to give up electrons and form cations, the substances on the left column of the periodic table possess low ionization energies.
To know more about period
https://brainly.com/question/16061498
#SPJ4
What would happen to the boilling point of water at 8000m above sea level where air pressure is lower
The boiling point will be lower, because water boils when its vapor pressure is equal to atmospheric pressure.
What is atmospheric pressure?Atmospheric pressure is described as the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.
If you are at 8 000 m above sea level, the air pressure is lower than one atmosphere and the equilibrium between the water and air pressures will be reached before.
In conclusion, Atmospheric pressure is caused by the weight of the air molecules above.
Learn more about Atmospheric pressure at: https://brainly.com/question/19587559
#SPJ1
The boiling point of water at 8000m above sea level where air pressure is lower would be significantly lower.
How does air pressure affect boiling point ?The boiling point of water decreases as the air pressure decreases. At an altitude of 8000 meters above sea level, the air pressure is significantly lower than it is at sea level, so the boiling point of water would also be significantly lower.
At sea level, the normal boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at a standard atmospheric pressure of 101.3 kPa. As the altitude increases, the atmospheric pressure decreases, so the boiling point of water decreases as well.
Find out more on boiling point of water at https://brainly.com/question/18188829
#SPJ1
What is the energy of each of the following photons in kilojoules per mole? Express the energy in kilojoules per mole to three significant digits.
Part A: ν=5.95×1019s−1
Part B: ν=20.00×103s−1
Part C: λ=2.57×102m
The energy of a photon can be calculated using the formula: E = hν = hc/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 Js), ν is the frequency, c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength which is 6.53 x 10^-38 kJ/mol
Part A: ν = 5.95 x 10^19 s^-1
E = hν = (6.626 x 10^-34 Js) x (5.95 x 10^19 s^-1) = 3.948 x 10^-14 J/photon
To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol)E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol
Part B: ν = 20.00 x 10^3 s^-1
E = hν = (6.626 x 10^-34 Js) x (20.00 x 10^3 s^-1) = 1.325 x 10^-31 J/photon
To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol). E = (1.325 x 10^-31 J/photon) / (6.022 x 10^23 photons/mol) = 2.20 x 10^-55 kJ/mol. Part C: λ = 2.57 x 10^2 m. E = hc/λ = (6.626 x 10^-34 Js) x (2.998 x 10^8 m/s) / (2.57 x 10^2 m) = 3.948 x 10^-14 J/photon. To convert to kilojoules per mole, we need to divide by Avogadro's number (6.022 x 10^23 photons/mol) .E = (3.948 x 10^-14 J/photon) / (6.022 x 10^23 photons/mol) = 6.53 x 10^-38 kJ/mol. In all the parts, the energy is expressed in kilojoules per mole to three significant digits.
Learn more about Planck's constant here:
https://brainly.com/question/27389304
#SPJ4
A baketball ha a momentum of 6. 0 kg m/ outh and a ma of 0. 15 kg what i the baketball velocity
The basketball velocity is 40 m/s.
What is velocity?A vector quantity with both size and direction is velocity. In respect to time, it is the rate with which a displacement changes. Using the formula velocity = displacement/time, velocity may be computed. It is a way to gauge how quickly something is moving in a certain direction. Acceleration, or the rate at which an object's velocity changes, is closely related with velocity. Being a vector quantity, velocity has both a direction and a magnitude. An object must move at the a constant speed and in the same direction in order to maintain a constant velocity.
To learn more about velocity
https://brainly.com/question/29215982
#SPJ4
Give a Question/Problem for Hot and Cold Compress Pillow.
Help mee plsss
THANK you!!!
Answer:
One problem that people may encounter when using a hot and cold compress pillow is that the pillow may not stay hot or cold for a long enough period of time. This can be frustrating for people who are using the pillow to alleviate muscle pain or reduce inflammation, as they may need to continually reheat or refreeze the pillow in order to maintain its therapeutic benefits. To solve this problem, people may need to find a pillow that is better at retaining heat or cold, or they may need to use additional heating or cooling elements (such as hot water bottles or ice packs) in conjunction with the pillow.
Explanation: