Answer:
Velocity: 4 m/s
Distance: 4 m
Explanation:
initial velocity: u = 0 m/s
Acceleration: a = 2 m/s²
Time taken: t = 2 seconds
Distance traveled: d = (what we need to find)
Final velocity: v = (what we need to find)
---------------------------------------
v = u + at
v = 0 + 2 × 2
v = 4 m/s
---------------------------------------
d = 0 × 2 + 1/2 × 2 × (2)²
d = 1/2 × 2 × 4
d = 4 m
M, a solid cylinder (M=2.15 kg, R=0.111 m) pivots on a thin, fixed, frictionless bearing. A string wrapped around the cylinder pulls downward with a force F which equals the weight of a 0.730 kg mass, i.e., F = 7.161 N. If instead of the force F an actual mass m = 0.730 kg is hung from the string, find the angular acceleration of the cylinder.
The angular acceleration of the cylinder is mathematically given as
[tex]\alpha = 60.2175 rad/s^2[/tex]
What is the angular acceleration of the cylinder.?Question parameters
M=2.15kgR = R=0mW= 7.161 NGenerally, the equation for Torque generated in the cylinder is mathematically given as
[tex]\sigma[/tex] = w×r
for circular motion torque is
[tex]\sigma = × \alpha[/tex]
t[tex]=0.5 × m ×r^2 × \alpha\\\\ =0.5 × 2.15 ×0.111 ^2 × \alpha[/tex]
t = 0.0132 ×[tex]\alpha[/tex]
Therefore
0.0132 × [tex]\alpha[/tex] = w × r
[tex]\\\\\alpha =\frac{ 7.161 0.111}{(0.0132)}[/tex]
[tex]\alpha = 60.2175 rad/s^2[/tex]
Read more about angular acceleration
https://brainly.com/question/1592013
#SPJ1
A
В
C
D
At which point will an image be formed?
ОА
Ов
Ос
OD
Answer:
oa
Explanation:
it may be oa is the right answer for this question
but I don't know properly
Ten bricks, each 6.0 cm thick and mass 1.5 kg, lie flat on a table. How much work is required to stack them over eachother
The workdone required to stack them over each other is 39.69 J
What is workdone?This is defined as the product of force and distance moved in the direction of the force.
Workdone (Wd) = Force × distance (d)
But
Force = weight = mass × acceleration due to gravity
w = mg
Distance (d) = height (h)
Thus,
Wd = weight × height
How to determine the workdone in stacking them togetherWe'll begin by calculating the weight of each bricks
Mass of each bricks (m) = 1.5 KgAcceleration due to gravity (g) = 9.8 m/s²Weight of each bricks (W) =?W = mg
W = 1.5 × 9.8
W = 14.7 N
Next, we shall determine the work done in stacking the 2nd on the 1st brick and so on..
Workdone in stacking the 2nd on the 1st
Weight (W) = 14.7 NHeight (h) = 6 cm = 6 / 100 = 0.06 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.06
Wd = 0.882 J
Workdone in stacking the 3rd
Weight (W) = 14.7 NHeight (h) = 0.12 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.12
Wd = 1.764 J
Workdone in stacking the 4th
Weight (W) = 14.7 NHeight (h) = 0.18 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.18
Wd = 2.646 J
Workdone in stacking the 5th
Weight (W) = 14.7 NHeight (h) = 0.24 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.24
Wd = 3.528 J
Workdone in stacking the 6th
Weight (W) = 14.7 NHeight (h) = 0.3 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.3
Wd = 4.41 J
Workdone in stacking the 7th
Weight (W) = 14.7 NHeight (h) = 0.36 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.36
Wd = 5.292 J
Workdone in stacking the 8th
Weight (W) = 14.7 NHeight (h) = 0.42 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.42
Wd = 6.174 J
Workdone in stacking the 9th
Weight (W) = 14.7 NHeight (h) = 0.48 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.48
Wd = 7.056 J
Workdone in stacking the 10th
Weight (W) = 14.7 NHeight (h) = 0.54 mWorkdone (Wd) = ?Wd = Weight × height
Wd = 14.7 × 0.54
Wd = 7.938 J
Total workdone = 0.882 + 1.764 + 2.646 + 3.528 + 4.41 + 5.292 + 6.174 + 7.056 + 7.938
Total workdone = 39.69 J
Learn more about workdone:
https://brainly.com/question/14667371
#SPJ1
The WEIGHT of each brick is (m g) = 14.7 Newtons
Work to lift each brick = (force x distance) = [14.7 x (distance lifted)] Joules
Place 2nd brick on top of the 1st: lift 6cm, (14.7N x .06m) = 0.882 J
Place 3rd brick on top of the 2nd: lift 12cm, (14.7N x .12m) = 1.764 J
Place 4th brick on top of the 3rd: lift 18cm, (14.7N x .18m) = 2.646 J
Place 5th brick on top of the 4th: lift 24cm, (14.7N x .24m) = 3.528 J
Place 6th brick on top of the 5th: lift 30cm, (14.7N x .3m) = 4.41 J
Place 7th brick on top of the 6th: lift 36cm, (14.7N x .36m) = 5.292 J
Place 8th brick on top of the 7th: lift 42cm, (14.7N x .42m) = 6.174 J
Place 9th brick on top of the 8th: lift 48cm, (14.7N x .48m) = 7.056 J
Place 10th brick on top of the 9th: lift 54cm, (14.7N x .54m) = 7.938 J
Total work to stackum (addum up) = 39.7 Joules
____________________________________________
Way #2 (easier):
Weight of each brick = (mg) = 14.7 Newtons
Work to stack each one = (14.7N) x (distance lifted) Joules
Number of bricks to lift = 9
AVERAGE distance to lift them = (1/2) (54cm + 6cm) = 30cm
Average work = (weight of each brick) x (average distance lifted)
Total work = (number of bricks) x (weight of each) x (average lift)
Total work = (9 bricks) x (14.7N) x (0.3m) = 39.69 Joules
The radius of curvature of a highway exit is r = 93.5 m. The surface of the exit road is horizontal, not banked. (See figure.)
If the coefficient of static friction between the tires of the car and the surface of the road is μ[tex]_{s}[/tex] = 0.402, then what is the maximum speed at which the car can safely exit the highway without sliding?
Static friction keeps the car from skidding off the road and points toward the center of the curve. By Newton's second law, the car experiences
• net vertical force
F [normal] - F [weight] = 0
• net horizontal force
F [friction] = ma = mv²/r
where v is the tangential speed of the car.
It follows that
F [normal] = F [weight] = mg
and when static friction is maximized at the car's maximum speed,
F [friction] = µ F[normal] = 0.402 mg
Solve for v :
0.402 mg = mv²/r ⇒ v = √(0.402 g (93.5 m)) ≈ 19.2 m/s
Many immigrants lived in
Which would most likely cause a decrease in the rate of energy production in a fusion nuclear reactor?
In a fusion nuclear reactor, a drop in temperature would most likely result in a decline in the rate of energy output.
What is nuclear power?The utilization of nuclear reactions to generate energy is known as a nuclear power. Nuclear fission, nuclear decay, and nuclear fusion processes are all sources of nuclear energy.
Nuclear power facilities currently produce the great bulk of the electricity generated by nuclear fission of uranium and plutonium.
The environment must be hot enough for the deuterium and tritium ions' kinetic energies to be sufficient to break through the Coulomb barrier and fuse together.
Hence a decrease in temperature would most likely cause a decrease in the rate of energy production in a fusion nuclear reactor.
To learn more about nuclear power refer to the link;
https://brainly.com/question/9859575
#SPJ1
Answer:
A: a drop in the temperature in the reactor
Explanation:
right on edg
I need help with my homework
Answer:
A. the center of mass
Explanation:
[tex]C_m[/tex] is usually used to designate the center of mass of an object or system of objects.
B. is incorrect because the combined mass of a system is usually denoted by ∑m.
C. is incorrect because the momentum of a system is denoted by the letter p.
The weather map shows some conditions in the atmosphere at noon on a
particular day.
Where would you expect the warmest weather?
A. In the southwest
B. In the northwest
C. In the southeast
D. In the northeast.
The geographical region where I would expect the warmest weather is: C. in the southeast.
What is a weather map?A weather map can be defined as a type of chart that is typically used to provide information about the average atmospheric condition of a particular geographical region over a specific period of time.
Based on the weather map shown in the image attached below, we can infer and logically deduce that the geographical region where the warmest weather is expected is in the southeast due to its very high atmospheric pressure.
Read more on weather here: https://brainly.com/question/24730207
#SPJ1
A car with a mass of 1080 kg is traveling in a mountainous area with a constant speed of 69.6 km/h. The road is horizontal and flat at point A, horizontal and curved at points B and C.
1. The radii of curvatures at B and C are: rB = 130 m and rC = 115 m. Calculate the normal force exerted by the road on the car at point A.
Normal Force = 1.-6x10^4 N
2. Now calculate the normal force exerted by the road on the car at point B.
(1) The normal force exerted by the road on the car at point A is 1.06 x 10⁴ N
(2) The normal force exerted by the road on the car at point B is 7,495.8 N.
Normal force at point AFn(A) = mg
where;
m is mass of the carg is acceleration due to gravityFn(A) = 1080 x 9.81
Fn(A) = 1.06 x 10⁴ N
Normal force exerted by the road on the car at point BThe normal force exerted by the road on the car at point B is calculated as follows;
Fn = Fn(A) - mv²/r
where;
Fn(A) is normal force at point Am is mass of the carr is radius of curve Bv is velocity of the car, 69.6 km/h = 19.33 m/sFn = 1.06 x 10⁴ - (1080 x 19.33²)/(130)
Fn = 7,495.8 N
Thus, the normal force exerted by the road on the car at point A is 1.06 x 10⁴ N and the normal force exerted by the road on the car at point B is 7,495.8 N.
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
A school bus is moving 26.8 m/s on
flat ground when it begins to
accelerate at 4.73 m/s². How much
time does it take to travel 95.1 m?
(Unit=s)
Watch your minus signs!
time (s)
Enter
The time taken for the bus to travel 95.1 m is 2.8 s
How to determine the final velocityInitial velocity (u) = 26.8 m/sAcceleration (a) = 4.73 m/s²distance (s) = 95.1 mFinal velocity (v) = ?v² = u² + 2as
v² = 26.8² + (2 × 4.73 × 95.1)
v² = 1617.886
Take the square root of both sides
v² = √1617.886
v = 40.2 m/s
How to determine the timeInitial velocity (u) = 26.8 m/sAcceleration (a) = 4.73 m/s²Final velocity (v) = 40.2 m/sTime (t) = ?
v = u + at
40.2 = 26.8 + (4.73 × t)
Collect like terms
4.73 × t = 40.2 - 26.8
4.73 × t = 13.4
Divide both side by 4.73
t = 13.4 / 4.73
t = 2.8 s
Learn more about velocity:
https://brainly.com/question/3411682
#SPJ1
The speed of supernova debris – about 15 years after Supernova 1987A exploded, its wind was seen hitting a pre-existing ring of gas at a distance of 0.7 light-years from the star that exploded. Calculate the speed of that debris. Give the answer in both light-years per year and km/hr or miles/hr, whichever is more intuitive for you. How does the speed you find compare with the speed of light?
1. The speed (in light-years per year) of the debris is 4.67×10⁻² light-years / year
2. The speed (in Km/h) of the debris is 50436000 Km/h
3. The speed of light is 21.4 times the speed of the debris
What is speed?Speed is the distance travelled per unit. Mathematically, it can be expressed as:
Speed = distance / time
How to determine the speed in light-years per yearDistance = 0.7 light-yearsTime = 15 years Speed = ?Speed = distance / time
Speed = 0.7 / 15
Speed = 4.67×10⁻² light-years / year
2. How to determine the speed in Km/hSpeed (in light-years per year) = 4.67×10⁻² light-years / yearSpeed (in Km/h) = ?1 light-years / year = 1.08×10⁹ Km/h
Therefore,
4.67×10⁻² light-years / year = 4.67×10⁻² × 1.08×10⁹
4.67×10⁻² light-years / year = 50436000 Km/h
3. Comparison of the speed of the debris with the speed of lightSpeed of light = 3×10⁸ m/sSpeed of debris = 50436000 Km/h = 50436000 / 3.6 = 14010000 m/sComparison =?Comparison = Speed of light / speed of debris
Speed of light / speed of debris = 3×10⁸ / 14010000
Speed of light / speed of debris = 21.4
Cross multiply
Speed of light = 21.4 × Speed of debris
Learn more about speed:
https://brainly.com/question/680492
#SPJ1
What net external force is exerted on a 1350-kg artillery shell fired from a battleship if the shell is accelerated at 2.00 ✕ 104 m/s2? (Enter the magnitude.)
N
What is the magnitude of the force exerted on the ship by the artillery shell?
N
The magnitude of the force exerted on the ship by the artillery shell will be 27× 10⁶ N.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Force is defined as the product of mass and acceleration. Its unit is Newton.
Given data;
Force,F = ?
Mass,m = 1350-kg
Acceleration,a = 2.00 ✕ 10⁴ m/s²
The magnitude of the force exerted on the ship by the artillery shell is found as;
F=ma
F=1350-kg × 2.00 ✕ 10⁴ m/s²
F= 10,000 N
The magnitude of the force exerted on the ship by the artillery shell will be 27× 10⁶ N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859#SPJ1
#SPJ1
Three objects are brought close to each other, two at a time. When objects A and B are brought together, they attract. When objects B and C are brought together, they repel. From this, we conclude that (a) objects A and C possess charges of the same sign. (b) objects A and C possess charges of opposite sign. (c) all three of the objects possess charges of the same sign. (d) one of the objects is neutral. (e) we need to perform additional experiments to determine information about the charges on the objects.
B. Objects A and C possess charges of opposite sign.
Attraction of two objects
The attraction of two objects occurs when the two objects have opposite charges.
Repulsion of two objectsThe repulsion of two objects occurs when the two objects have same charges.
Thus, we can conclude that, objects A and C possess charges of opposite sign.
Learn more about attraction of charges here: https://brainly.com/question/16033085
#SPJ1
The cost of gas is $1.27 per liter. How much does a gallon of gas costs?
The cost of gas is $1.27 per liter and the gallon of gas costs $4.80. where 1 gallon is equal to 3.78541 liters.
To convert the cost of gas from dollars per liter to dollars per gallon, The conversion factor between liters and gallons.
1 gallon is equal to 3.78541 liters (the exact conversion factor is 3.785411784).
Given the cost of gas is $1.27 per liter, let's calculate the cost per gallon:
Cost per gallon = Cost per liter × Liters per gallon
Cost per gallon = $1.27 × 3.78541
Cost per gallon = $4.80
So, a gallon of gas costs $4.80.
To know more about the gallons:
https://brainly.com/question/31702678
#SPJ3
A long uniform board weighs 52.8 N (10.6 lbs) rests on a support at its mid point. Two children weighing 206.0 N (41.2 lbs) and 272.0 N (54.4 lbs) stand on the board so that the board is balanced.
What is the upward force exerted on the board by the support?
The upward force exerted on the board by the support is 530.8 N.
Upward force exerted on the board by the supportThe sum of the upward forces is equal to sum of downward forces;
total downward forces = 52.8 N + 206 N + 272 N = 530.8 N
downward force = upward force = 530.8 N
Thus, the upward force exerted on the board by the support is 530.8 N.
Learn more about upward force here: https://brainly.com/question/6080367
#SPJ1
Three strings, attached to the sides of a rectangular frame, are tied together by a knot as shown in the figure. The magnitude of the tension in the string labeled C is 56.3 N.
Calculate the magnitude of the tension in the string marked A. (You'll need to get the various positions from the graph. The ends of the strings are exactly on one of the tic marks.)
The magnitude of the tension in the string marked A and B is mathematically given as
A = 52.5 NB = 39.5 NWhat is the magnitude of the tension in the string marked A?Generally, the equation for is mathematically given as
The angle at A is...
[tex]tan\theta = 3/8[/tex]
When below the negative x.
B= tan\phi
[tex]tan\phi = 5/4[/tex]
When below the negative x
C=
[tex]tan \rho = 1/6[/tex]
Hence, considering the Horizontal components
74.9cos(9.46) = A*cos(20.6) + B*cos(51.3)
A = 78.9 - 0.668B
Hence, considering the Vertical components
74.9*sin(9.46) + Asin(20.6) = Bsin(51.3)
40.07 = 1.015B
B = 39.5 N
In conclusion, Sub the value of B is the equation of A
A = 78.9 - 0.668B
Sub
A = 78.9 - 0.668( 39.5 N)
A = 52.5 N
Read more about tension
https://brainly.com/question/15880959
#SPJ1
A knife is dropped from the top of a 10.0 m high mast on a ship moving at 1.74 m/s due south.
(a) Calculate the velocity of the knife relative to the ship when it hits the deck of the ship.
m/s (down)
(b) Calculate the velocity of the knife relative to a stationary observer on shore.
m/s
° (below the horizontal to the south)
(c) Discuss how the answers give a consistent result for the position at which the knife hits the deck.
a)The velocity of the knife relative to the ship when it hits the deck of the ship will be 14.00 m/sec.
b)The velocity of the knife relative to a stationary observer on shore is 14.10 m/sec
c)The position at which the knife hits the deck is 82.8°.
What is velocity?The change of displacement with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The given data in the problem is;
The velocity of the knife relative to the ship when it hits the deck of the ship is;
v=√2gh
v=√2×9.81 ×10.0 m
v=14.00 m/sec
b)
The velocity of the knife relative to a stationary observer on shore is found as;
v₁₂ = √[(14.00)²+(1.74)²]
v₁₂=14.10 m/sec
c)
The position at which the knife hits the deck is;
[tex]\rm \theta = tan^{-1}\frac{14.00}{1.75} \\\\ \theta = 82.8 ^ 0[/tex]
Hence, the velocity of the knife relative to the ship, the velocity of the knife relative to a stationary observer on shore, and the position at which the knife hits the deck will be 14.00 m/sec,14.10 m/sec, and 82.8° respectively.
To learn more about the velocity, refer to the link: https://brainly.com/question/862972.
#SPJ1
Discuss the causes, characteristics, and major features of black holes. Explain why the concept of a black hole does or doesn't seem reasonable to you and provide some rationale for your views?
The concept of a black hole seem reasonable to me because of its valid and authentic evidences.
What are the causes, characteristics, and major features of black holes?A black hole is a region in space where light is unable to escape due to strong gravitation force. The strong gravity is formed because matter has been pressed into a tiny space. This compression occurs at the end of a star's life. Some black holes are formed when a stars die.
So we can conclude that the concept of a black hole seem reasonable to me because of its valid and authentic evidences.
Learn more about black hole here: https://brainly.com/question/468699
#SPJ1
In which part of the ear is the sound wave converted into an electrical impulse?
A cannonball is shot horizontally off a
10.5 m high castle wall at 47.4 m/s. How
far from the base of the wall does the
cannonball land?
Answer:it's 132.2m
Explanation:
Hello !
Because first recall parabolic peak height equation and
given that v=47.4m/s , h=10.5m
v²sin²(θ⁰)=2ℎ₀(47.4)²²(θ⁰)=2(9.81)(10.5) θ=17.63secondly recall parabolic total distance equation
d₀=²(2θ⁰)/gd₀=(47.4)²(2(17.63)⁰)/9.81d₀=132.2mThe distance from the base of the wall that the cannonball land will be 138.7 m.
What is the peak height equation?Consider that a body of mass 'm' is projected with a velocity of projection 'v' and angle of projection 'θ'. Assume that 'h' be the maximum height attained by the projectile.
2gh = v²sin²θ
This expression can be used to calculate the maximum height of the projectile.
Given, the height of the castle wall, h = 10.5 m
The velocity of the cannonball, v = 47.4m/s
The peak height equation can be used to find the angle θ:
v²sin²θ = 2gh
(47.4)² sin²θ = 2(9.81)(10.5)
Sinθ = 0.3028
θ = 17.63°
Therefore, the distance (d) from the base of the wall that the cannonball land:
d = (47.4)² × 2 sin(17.63) / 9.81
d = 138.7m
Therefore the distance from the base of the wall that the cannonball land is 138.7m.
Learn more about the peak height equation, here:
brainly.com/question/15023316
#SPJ5
16. 1 800 cm³ of fresh water of density
1 000 kgm is mixed with
2 200 cm³ of sea water of density
1 025 kgm. Calculate the density of
the mixture.
The density of the mixture is determined as 1,013.75 kg/m³.
Density of the mixtureThe density of the mixture is calculated as follows;
density = total mass of the mixture / total volume of the mixture
mass of the fresh water = density x volume
= 1000 kg/m³ x 0.0018 m³
= 1.8 kg
mass of the sea water = 1025 kg/m³ x 0.0022 m³
= 2.255 kg
Total mass = 1.8 kg + 2.255 kg = 4.055 kg
Total volume = 0.0018 m³ + 0.0022 m³ = 0.004 m³
Density = 4.055 kg/0.004 m³ = 1,013.75 kg/m³
Thus, the density of the mixture is determined as 1,013.75 kg/m³.
Learn more about density here: https://brainly.com/question/6838128
#SPJ1
In 450 BCE, Greek philosopher Democritus first thought of the existence of tiny particles that compose everything around us. He named them 'atomos', meaning _________.
A. None of these
B. Indivisible
C. Invisible
D. Particle
B. The meaning of 'atomos' according to Democritus in 450 BCE is indivisible.
The building block of every matter
A Greek philosopher known as Democritus first thought of the existence of tiny particles that compose everything around us.
Democritus of Abdera, named the building blocks of matter atomos, meaning literally “indivisible.
Thus, the meaning of 'atomos' according to Democritus in 450 BCE is indivisible.
Learn more about atoms here: https://brainly.com/question/6258301
#SPJ1
a= 3t^3 + 2t^2 find
1) velocity at t= 2s.
2) displacement at 4s
please answer this question ASAP
Use the fundamental theorem of calculus.
[tex]f(t) = f(0) + \displaystyle \int_0^t f'(u) \, du[/tex]
In order to find velocity and position exactly, you need to know the initial velocity and position.
1) Integrate the acceleration function to get the velocity function. By the FTC,
[tex]v(t) = v(0) + \displaystyle \int_0^t a(u) \, du[/tex]
[tex]v(t) = v(0) + \displaystyle \int_0^t (3u^3+2u^2) \, du[/tex]
[tex]v(t) = \dfrac34 t^4 + \dfrac23 t^3 + v(0)[/tex]
At [tex]t=2\,\rm s[/tex], the velocity is
[tex]v(2) = \dfrac34 2^4 + \dfrac23 2^3 + v(0) = \boxed{\dfrac{52}3 + v(0)}[/tex]
2) Integrate the velocity function to the get the position function. By the FTC again,
[tex]x(t) = x(0) + \displaystyle \int_0^t v(u) \, du[/tex]
[tex]x(t) = x(0) + \displaystyle \int_0^t \left(\frac34 u^4 + \frac23 u^3 + v(0)\right) \, du[/tex]
[tex]x(t) = \displaystyle \frac3{20} t^5 + \frac16 t^4 + v(0) t + x(0)[/tex]
At [tex]t=4\,\rm s[/tex], the object's position is
[tex]x(4) = \dfrac3{20}4^5 + \dfrac16 4^4 + 4v(0) + x(0) = \dfrac{2944}{15} + 4v(0) + x(0)[/tex]
Fortunately, you don't need the initial position to find the displacement, since [tex]x(0)[/tex] cancels out in the end.
[tex]\Delta x = x(4) - x(0) = \boxed{\dfrac{2944}{15} + 4v(0)}[/tex]
A long uniform board weighs 52.8 N (10.6 lbs) rests on a support at its mid point. Two children weighing 206.0 N (41.2 lbs) and 272.0 N (54.4 lbs) stand on the board so that the board is balanced.
What is the upward force exerted on the board by the support?
764.8 N is incorrect.
The upward force exerted on the board by the support is 530.8 N.
Upward force exerted on the board by the supportThe sum of the upward forces is equal to sum of downward forces;
total downward forces = 52.8 N + 206 N + 272 N = 530.8 N
downward force = upward force = 530.8 N
Thus, the upward force exerted on the board by the support is 530.8 N.
Learn more about upward force here: https://brainly.com/question/6080367
#SPJ1
A stone is dropped from rest into a well. The sound of the splash is heard exactly 2.70 s later. Find the depth of the well if the air temperature is 11.0°C.
The depth of the well at the given air temperature is 456.3 m.
Depth of the wellThe depth of the well is calculated from the principle of echo.
v = 2d/t
2d = vt
d = vt/2
where;
v is speed of sound in air at 11.0°C = 338 m/sd = (338 x 2.7)/2
d = 456.3 m
Thus, the depth of the well at the given air temperature is 456.3 m.
Learn more about depth here: https://brainly.com/question/1441593
#SPJ1
A Skier starting from rest rolls down a 35.0 m ramp. When he arrives at the bottom of the ramp his
speed is 10.43 m/s. (a) Determine the magnitude of his acceleration, assumed to be constant, (b) If the
ramp is inclined at 60.0 degrees with respect to the ground, what is the component of his acceleration
that is parallel to the ground. (c) Provide me with a free body diagram, one for the 35 m ramp situation.
Also, provide a nice sketch of the skier.
The acceleration is 1.55 m/s^2 while is component that is parallel to the ground is 0.775 m/s^2.
What is acceleration?The term acceleration is the rate of change of speed. Given that the distance covered is 35.0 m and the final velocity is 10.43 m/s it the follows that;
v^2 = u^2 + 2as
u = 0 because he started from rest
v^2 = 2as
a = v^2/2s
a = (10.43 m/s)^2/2 * 35.0 m
a = 1.55 m/s^2
The component of this acceleration which is parallel to the ground is;
ax = a sin θ
ax = 1.55 m/s^2 cos 60
ax = 0.775 m/s^2
Learn more about acceleration:https://brainly.com/question/12550364
#SPJ1
Lesson 2 History of Physical Science
Write an expository essay explaining how science builds on itself. Use at least two specific examples from this lesson.
The prompt above requires an explanatory essay. The focus of an explanatory essay is to give clarity to a concept. See the sample below.
What is the explanatory essay as per the prompt above?From history, it is clear that Science builds on itself. For avoidance of doubt, this means that improvements in science are incremental with each improvement feeding off the last.
From the lesson we have examples of this phenomena such as that of Galileo. Recall that the text indicates that He improved the telescope; and while carrying out the same research that his predecessor Copernicus had done in relation to the stars and planets, Galileo used math to justify his position.
It is also on record that Johannes Kepler who lived in the same period as Galileo took interest in Astronomy. In this case, science built on itself because, Kepler's work served as the foundation for Sir Isaac Newton's work. This is also another example of how science builds on itself.
From the above textual evidence, it is given beyond reasonable double that science indeed builds on itself with the discovery of each generation serving as the foundation for the advancement of the next.
Learn more about Explanatory Essays at;
https://brainly.com/question/26984401
#SPJ1
Two football players collide head-on in midair while chasing a pass. The first player has a 101.0 kg mass and an initial velocity of 4.10 m/s, while the second player has a 117 kg mass and initial velocity of -6 m/s. What is their velocity (in m/s) just after impact if they cling together? (Indicate the direction with the sign of your answer.)
Assuming players stick together immediately after the collision, their speed will be 1.3206 m/sec, and - ve indicates their direction.
What is the law of conservation of momentum?According to the law of conservation of momentum, the momentum of the body before the collision is always equal to the momentum of the body after the collision.
The given data in the problem is;
(m₁) is the mass of 1st player= 101.0 kg
(u₁) is the initial velocity of 1st player (u₁) = 4.10 m/s
(m₂) is the mass of 2nd player = 117 kg
(u₂) is the initial velocity of 2nd player= -6 m/s
(v) is the velocity after collision =.?
According to the law of conservation of momentum;
Momentum before collision =Momentum after collision
m₁u₁+m₂u₂=(m₁+m₂)V
101.0 kg × 4.10 m/sec + 117 kg × (-6 m/sec) = (101.0 kg + 117 kg) × V
V= - 1.3206 m/sec
Hence, the velocity of players just after impact, if they cling together, will be - 1.3206 m/sec, and - ve shows the direction.
To learn more about the law of conservation of momentum refer;
https://brainly.com/question/1113396
#SPJ1
which of the following examples is not considered a pure substance?
Answer asap
Answer:
Fruit Punch
Explanation:
A pure substance is whereby there is only one type of element or a compound in the periodic table in the substance.
Carbon: Well its just C in the periodic table, so this is definitely pure.
Water Molecule: What makes water? H2O right? Contains Hydrogen and Oxygen, and as we all know H2O is a compound, therefore this is a pure substance.
Fruit Punch: What makes fruit punch, water and fruits. Fruits may contain citric acid(a compound itself), and is mixed with water with already has a compound, so having 2 different compounds will result in a mixture and therefore it will not be pure.
At a circus, a human cannonball is shot from a cannon at 15m/s at an angle of 40 degrees above horizontal. She leaves the cannon at 2m above ground and lands in a net 1m above the ground. At what height does a human cannonball reach?
The maximum height reached by the human cannonball is 4.74 m.
Height reached by the human cannonballThe height reached is calculated as follows;
H = u²sin²θ/2g
where;
u is the initial velocityθ is the angle of projectionH = (15² x [sin(40)]² )/(2 x 9.8)
H = 4.74 m
Thus, the maximum height reached by the human cannonball is 4.74 m.
Learn more about height of motion here: https://brainly.com/question/5687206
#SPJ1