A bucket is being lowered by a very light rope with a constant downward velocity. The tension in the rope must be

Answer:

Surface tension is the tendency of liquid surfaces to shrink into the minimum surface area possible. Surface tension allows insects, usually denser than water, to float and slide on a water surface.

Answer:

3.75 m/s

Explanation:

Formula:

Average Speed = Total Distance / Total Time

Given:

Total Distance = 150 m

Total Time = 160 - 120 = 40 s

To Find:

Average Speed

Solution:

Average Speed = 150/40

Average Speed = 3.75 m/s

Answer:

Multiple

Explanation:

He was the first to determine that refraction drives vision in the eye. Using two eyes enables depth perception. Kepler is also known for defining laws regarding planetary motion.

Answer:

1.551×10^-8 Ωm

Explanation:

Resistivity of a material is expressed as shown;.

Resistivity = RA/l

R is the resistance of the material

A is the cross sectional area

l is the length of the wire.

Given;

R = 0.0310 Ω

A = πd²/4

A = π(2.05×10^-3)²/4

A = 0.000013204255/4

A = 0.00000330106375

A = 3.30×10^-6m

l = 6.60m

Substituting this values into the formula for calculating resistivity.

rho = 0.0310× 3.30×10^-6/6.60

rho = 1.023×10^-7/6.60

rho = 1.551×10^-8 Ωm

Hence the resistivity of the material is 1.551×10^-8 Ωm

Answer: I HOPE IT HELPS

Use this Speed Calculator to calculate the speed you have travelled based ... (so add three 0s to your kilometres to get metres) and a mile is 1609 metres. ... You will have distance per time such as kilometres per hour or metres per second. ... If you want help with that, click on hyperlink for metres or for minutes and seconds.

Explanation:

Answer:

Wavelenght of light in the range of 470nm is that of blue colourand Allura red absorbs this blue light and reflects the red light

Then we can say Allura red absorbs all light colours but reflect red

Allura is red due to the fact that it absorbs the light that's in the wavelength.

From the complete information, it should be noted that even though allura red is red in color, we choose to use monitor the wavelength of 470nm because absorbs the light that's in the wavelength range of blue color and thereby reflects the red wavelength.

It should also be noted that the allura red absorbs all the other wavelengths. It doesn't absorb the red light but rather it reflects it.

In conclusion, the red light will be reflected.

Read related link on:

https://brainly.com/question/14524069

Answer:

Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature: forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.

Explanation:

Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.

Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Answer:

t = 6.09 seconds

Explanation:

Given that,

Speed, v = 44.1 cm/s

Distance, d = 269 cm

We need to find the time interval of the marble. Speed is distance per unit time.

[tex]v=\dfrac{d}{t}\\\\\implies t=\dfrac{d}{v}\\\\t=\dfrac{269\ \text{cm}}{44.1\ \text{cm/s}}\\\\t=6.09\ s[/tex]

Hence, the time interval of the marble is 6.09 seconds.

Answer:

0.5 m

Explanation:

The following data were obtained from the question:

Force (F) applied = 5 N

Work done (W) = 2.5 J

Distance (s) =?

Work done (W) can be defined as the product of force (F) and distance (s) moved in the direction of the force. From the above definition, work done (W) can be represented mathematically as:

Work done (W) = Force (F) × Distance (s)

W = F × s

With the above formula, we can obtain the distance moved by the book as shown below:

Force (F) applied = 5 N

Work done (W) = 2.5 J

Distance (s) =?

W = F × s

2.5 = 5 × s

Divide both side by 5

s = 2.5/5

s = 0.5 m

Therefore, the book moved a distance of 0.5 m.

Explanation:

100cm=1m

5 cm= x

cross multiple

x=5/100

=0.05m

There are 0.05 meters in 5 cm. The correct option among the following is option (B).

In the metric system, a centimeter (cm) is a unit of length. It is one centimeter (1 cm = 0.01 m) in size. Small distances or measurements, such as the length, height, or width of items, are frequently measured in centimeters. Due to its practical size for many routine measurements, it is also frequently employed in scientific and mathematical computations.

In the International System of Units (SI), the meter serves as the base unit and is frequently used to measure lengths, heights, and other measurements. It serves as the basic building block for other metric units like centimeters (one meter equals one hundred centimeters) and kilometers (one kilometer equals one thousand meters).

So, to convert 5.0 cm to meters:

5.0 cm ÷ 100 = 0.05 m

Hence, 5.0 cm is equal to 0.05 meters. The correct option is (B).

To learn more about meters, here:

https://brainly.com/question/13187866

#SPJ4

Answer:

I hope you fall down a 40 floor hotel resort onto the porch, and explode into the gushing body you are!

Explanation:

Answer:

90 m

Explanation:

There are two unknowns: the amount of time the squirrel spent running, and the length of the race.  Let's call these t and x, respectively.

The average velocity is the total distance divided by the total time.

5.0 m/s = x / (t + 3.0)

The total distance is the time she spent running times the speed she ran at.

x = (6.0 m/s) t

Substitute and solve:

5 = 6t / (t + 3)

5 (t + 3) = 6t

5t + 15 = 6t

t = 15

She ran for 15 seconds (not including the 3 seconds she stopped).  So the length of the race is:

x = (6.0 m/s) (15 s)

x = 90 m

the boot kecked the ball which is frictinal force

Answer:

steel because being alloy in metal it has free electrons in metals

Answer:

[tex]a=0.08\ m/s^2[/tex]

Explanation:

Given that,

Mass of a box, m = 18 kg

It is pushed with a force of 250 N

The coefficient of friction is 0.8

We need to find the acceleration of the box.

Normal force acting on the box,

N = mg

M = 18 × 10

N = 180 N

The force acting on the force in terms of coefficient of friction is given by :

[tex]F=\mu mg\\\\\text{or}\\\\ ma=\mu mg\\\\a=\dfrac{\mu }{g}\\\\a=\dfrac{0.8}{10}\\\\a=0.08\ m/s^2[/tex]

So, the acceleration of the box is [tex]0.08\ m/s^2[/tex]

Answer:

2.13 m/s^2.

Find the remaining answer in the explanation

Explanation:

Given that a sprinter practicing for the 200-m dash accelerates uniformly from rest at A and reaches a top speed of 41 km/h at the 61-m mark. He then maintains this speed for the next 83 meters before uniformly slowing to a final speed of 34 km/h at the finish line.

1.) The maximum horizontal acceleration will be when she attained her maximum speed. That is,

Speed = 41 km/h

Convert km/h to m/s

(41×1000) / 3600

Speed = 11.39 m/s

Using speed formula to calculate time

Speed = distance/time

11.39 = 61/t

t = 61/11.39

t = 5.36s

Where the distance = 61 m

Maximum acceleration = velocity /time

Maximum acceleration = 11.39/5.36

Maximum acceleration = 2.13 m/s^2

The maximum acceleration value occurs when the sprinter is starting from rest and attaining the maximum speed.

Answer:

A. smaller arteries

Explanation:

A. because it makes no sence.

Answer:

The answer is 21

Explanation:

5 + 2 + 6 + 8 = 21

Answer:

The satellite that is 7500 km above earth's surface is 1.24 times faster than the satellite at 15000 km above earth's surface

Explanation:

Generally the gravitational force acting on each satellite is mathematically represented as

[tex]F = \frac{G * M_e * m_2 }{r^2}[/tex]

Here [tex]M_e[/tex] is the mass of the earth

[tex]r = r_e + R [/tex]

So [tex] r_e [/tex] is the radius of the satellite and R is the radius of earth with value R = 6371 km

This force is also equivalent to the centripetal force acting on each satellite which is mathematically represented as

[tex]F = \frac{mv^2}{ r^2}[/tex]

So

[tex]\frac{mv^2}{ r^2} = \frac{G * m_1 * m_2 }{r^2}[/tex]

=> [tex]v = \sqrt{ \frac{GM_e}{r} }[/tex]

So for [tex]r = 7500+ 6371 = 13871 \ km [/tex]

We have that

[tex]v_1 = \sqrt{ \frac{GM_e}{13871} }[/tex]

and [tex]r = 15000+ 6371 = 21371 \ km [/tex]

We have that

[tex]v_2 = \sqrt{ \frac{GM_e}{21371} }[/tex]

So

[tex]\frac{v_1}{v_2} = \frac{\sqrt{\frac{GM_e}{13871} } }{ \sqrt{\frac{GM_e}{21371}} }[/tex][tex]v = \sqrt{ \frac{GM_e}{r} }[/tex]

 =>  [tex]\frac{v_1}{v_2}  = \sqrt{ \frac{21371}{13871} }[/tex]

 =>   [tex]v_1    = 1.24 v_2[/tex]

So satellite that is 7500 km above earth's surface is 1.24 times faster than the satellite at 15000 km above earth's surface

Answer:

The net force should be of a magnitude of 64 N

Explanation:

We use Newton's second Law for this:

[tex]F_{net} = m\,*\,a[/tex]

which for our case gives:

[tex]F_{net} = m\,*\,a=16\,(4)\,N= 64\,\,N[/tex]

Answer:

Yes, it does

Explanation:

There are not many explanations, but when thermal energy is shined on an object it usually starts to heat up.

The answer is 3.53400621

Reduce the expression, if possible, by cancelling common factors.

Answer: 3.53400621

Explanation: Hope this helped! :)

Answer:

500 watts

Explanation:

Recall that the definition of power is the amount of energy delivered per unit of time.

In our case, the energy delivered is potential energy which we can estimate as the product of the weight of the object times the distance it is lifted above ground:

200 N x 10 m = 2000  Nm

then the power is the quotient of this potential energy divided the time it took to lift the object to that position:

Power = 2000 / 4   Nm/s = 500 Nm/s = 500 watts