A boy with a mask of 20 is running at 3 m/s what is his kinetic energy

Answer: yes

Explanation:

not to sure

A 1.5 x 103 kg car's momentum is equal to 4.5 x 104 kg m/s east if it moves at a speed of 30 m/s for 60 seconds while traveling straight east.

Momentum is a property of an object or system that describes its tendency to move or stay in motion. It is equal to the product of the mass of the object and its velocity. Momentum is conserved, meaning that the total momentum of an isolated system remains constant, regardless of any changes or interactions within the system. Momentum is an important concept in classical mechanics, and is directly related to forces, energy, and angular momentum. Momentum is an essential factor for describing the behavior of objects in motion.

To learn more momentum

https://brainly.com/question/1042017

#SPJ1

A) A parcel of air will rise if it has a lower density than the surrounding air.  is the relative order of air in the atmosphere.

In the atmosphere, air moves from high pressure to low pressure areas. When a parcel of air is heated, it expands and becomes less dense than the surrounding air. As a result, the parcel of air rises because it is less dense than the surrounding air, which creates a lower pressure area.

This process is known as convection and is responsible for many weather phenomena such as thunderstorms and cloud formation. In contrast, if a parcel of air cools and becomes more dense, it sinks because it creates a higher pressure area than the surrounding air.

To know more about   convection click below:

https://brainly.com/question/4138428#

#SPJ4

Interstitial lung disease is low lung compliance as a result, last of electrical lung tissue destruction.

Interstitial lung disorders brought on by breathing in particles like silicon and asbestos (asbestosis) can cause low lung compliance (silicosis).

Lungs and the pleural cavity have the capacity to expand and contract in response to variations in pressure. Lung compliance, which is a key determinant of lung health and function, is defined as the volume change per unit of pressure change across the lung. Lung compliance varies between inhalation and expiration because measurements of lung volumes vary between the two at the same pressure. Depending on whether only volume and pressure are measured (static) or whether their variations over time are also recorded, lung compliance can be classified as either static or dynamic.

know more about lungs here

https://brainly.com/question/13210870#

#SPJ4

Using the strain energy that the pole has stored in it, the running athlete's kinetic energy is transformed into the potential energy needed to jump.

Males employ the formula: h= 0.60 * [male height] + 12(v2/g), whereas females use h= 0.55 * [female height] + 12(v2/g).

It is merely an instance of energy being exchanged. If an athlete can run at 10 m/s and we calculate g as 10 m/s/s, the height equals 5 m.

Each vaulter has three tries to clear a particular height during a competition. In order to fall readily if touched, a bar is supported by two uprights. Up until a winner is determined through the process of elimination, it is raised gradually.

There has been a failed trial. A competitor's pole breaking while trying to clear the bar is not considered a trial or failure. No one is permitted to touch the vaulting pole.

To learn more about pole refer to:

https://brainly.com/question/3506806

#SPJ4

Answer: The time it took for them to fall ere the same.

Explanation:

The only difference was because of resistance, weight doesn't affect the speed of gravity, the speed of gravity stays the same (9.801 meters per second)

The required temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

Given that,

The change in entropy of the system = 675 J/K

Heat energy = 243 J

Temperature of the system = ?

The temperature of the system is calculated below.

ΔS = ΔH/T

where,

ΔH is the heat energy

ΔS is the change in entropy of the system

T = ΔH/ΔS = 243/675 = 0.36 K

By converting temperature in kelvin to temperature in degrees centigrade, we get,

T = 273 + 0.36 = 273.36 °C

Thus, temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

To know more about temperature:

https://brainly.com/question/20940838

#SPJ4

The time taken by the object to hit the ground is 1.8 seconds.

The attraction that draws two objects together is known as gravitational force, sometimes referred to as gravity. Every mass-containing object pulls on nearby things gravitationally in a sizable way.

The time it takes for an object to hit the ground after being dropped off a cliff can be calculated using the formula:

t = √(2*d/g)

where t is the time, d is the distance fallen, and g is the acceleration due to gravity.

In this case, we don't know the distance fell, but we can use the horizontal velocity and time of travel to find it:

d = v * t

where v is the velocity (6 m/s), and t is time (3 seconds)

d = 6 * 3 = 18 m

Now we can use the distance fallen to calculate the time it takes to hit the ground:

t = √(2*d/g)

g is approximately 9.8 m/s^2

t = √(2*18/9.8) = √ (3.6) = 1.8 seconds

So, it takes 1.8 seconds for the object to hit the ground after traveling horizontally off a cliff at 6 m/s for 3 seconds.

To know more about gravitational force, visit:

brainly.com/question/12528243

#SPJ1

The total distance that the truck travels is 11.7 km

Part (a)

The algebraic sum of the various distances results in the total distance covered by the trucks.

DT = d1 + d2 + d3

So, total distance that the truck travels = 1.4 + 7.7 + 2.6 = 11.7 km

Part (b) Question is missing :

(b) What are the magnitude (in km) and direction of the truck's displacement? (Enter a number.)

magnitude   #?   km

direction? east, west or neither.

The quickest route taken by the object to get from one spot to another is called displacement.

As the truck travels in three directions, from east to west to east, it begins out from the east. Think of the east as being good and the west as being negative. As a result, the displacement can be calculated as shown below.

D =d1 - d2 + d3 = 1.4 - 7.7 + 2.6 = 1.4 - 5.1 = -3.7 km

Here, the negative sign shows that the truck has displaced in the west direction.

Learn more about displacement here :

brainly.com/question/11934397

#SPJ4

Work is accomplished by stretching or compressing a spring. Elastic potential energy is stored in the spring. It is recommended to expand the spring up to 12.8 cm.

Elastic potential energy is stored in the spring as a result of the work required to stretch or compress it. A spring's elastic potential energy is equal to one-half the sum of its spring constant times its deformation squared.

We'll talk about elastic potential energy as the second type of potential energy. The energy that is trapped in elastic materials as a result of their stretching or compression is known as elastic potential energy.

To know more about spring stretched here:

brainly.com/question/14203117

#SPJ1

Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.

by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.

Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.

reduces the expense of transportation

creates a design that is appropriate and aids the customer in becoming more sustainable.

establishes sustainable guidelines for disposing of outdated technology.

myNav Green Cloud Advisor assists businesses in developing cloud solutions that cut carbon emissions and create a platform for ethical innovation. Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions

To learn more about Accenture myNav from given link

https://brainly.com/question/26449898

#SPJ4

L=rp Angular Momentum the linear momentum p. Moment of momentum is another name for angular momentum.

List the object's mass and speed in step one. Convert any values into SI units in step two (kg, m, s). Step 3: To calculate an object's momentum, multiply the object's mass and velocity.

Momentum can go wrong. As a vector quantity with both magnitude and direction, momentum has both. The sign, positive or negative, in physics serves as a cue as to the direction. Positive amounts normally signify a forward or upward motion, whereas negative quantities typically indicate a backward or downward motion.

to know more about momentum here:

brainly.com/question/24030570

#SPJ4

What is momentum?

It would take 5 pounds of force, that is equal force, to stop the ball from rolling because the same amount of force must be used to stop the object.

According to Newton's third law of motion, every action which is occurring in nature has an equal as well as an opposite reaction. For instance, if a particular object A happens to exert a force on another object B, then  object B will also be exerting an equal as well as an opposite force on  object A.

If a particular ball is rolling with 5 pounds of force then the same amount of reaction will be required to bring it to rest. That is, equal force of 5 pounds will be required to stop the ball.

Hence, option D is the correct option.

To know more about force here

https://brainly.com/question/14898506

#SPJ4

According to the given statement 67.7%  is the efficiency of the engine.

A comparison of the energy output and input in a particular system is called efficiency in physics (and frequently in chemistry). Its definition is the proportion of output energy to input energy, which is provided by the equation: To describe energy in the form of heat or power, this equation is frequently utilized.

n = 1 - (QC/QH)

n = efficiency

QC = Cold Reservoir = 220 K

QH = Hot Reservoir = 680 K

n = 1 - (220 ÷ 680)(÷10)

n = 1 - (22 - 68) (2)

n = 1 - (11 ÷ 34 )

n = (34 - 11) ÷ 34

n = 23 ÷ 34

n = 0.676 * 100

n = 67.6

Therefore, 67.6% is the efficiency of the engine.

Learn more about efficiency from the given link.

brainly.com/question/13222283

#SPJ4

Answer:

The acceleration of an object can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. The equation is:

F = ma

where F is the force, m is the mass, and a is the acceleration.

So, if we know the mass of the object (m = 56 kg) and the force acting on it (F = 800 N), we can calculate the acceleration (a) by dividing the force by the mass:

a = F / m

a = 800 N / 56 kg

a = 14.28 m/s^2

So the acceleration is 14.28 m/s^2

Statement D. They have sufficient gravity to make themselves round accurately describes a similarity between all planets in terms of this movement and the presence of mass to form such a celestial body.

All planets need to have gravity in order to orbit around major celestial bodies, i.e., stars such as in the case of the earth planet or Mars, they orbit around the Sun which is the star of the solar system. The presence of the attractive force of gravity allows planets to move in a cycle across their stars.

Therefore, with this data, we can see that all planets have gravity and orbit around major celestial bodies and thus they can be considered to share the particularity to have a well defined orbit due to the presence of mass.

Learn more about planets and gravity here:

https://brainly.com/question/1286910

#SPJ1

The time it takes for the ball to reach its maximum height is 745 milliseconds.

What is time?

Time is defined as a scalar quantity that describes the progression of events in the universe. It is often considered to be the fourth dimension of spacetime, along with the three dimensions of space. Time is closely related to the concepts of causality, or the relationship between cause and effect, and is considered to be a fundamental aspect of the physical universe.

To find the time it takes for the ball to reach its maximum height, we need to use the equation:

1/2 * a * t^2 + v * t + d = 0

where a is the acceleration due to gravity (-9.8 m/s^2), t is the time, v is the initial velocity (2.13 m/s), and d is the initial displacement (0 m, since the ball is thrown upward from the ground).

We know that the ball is thrown upward and reaches its maximum height, so it is subject to a constant acceleration due to gravity in the downward direction. Therefore, the acceleration is -9.8 m/s^2.

The time to reach the maximum height can be found by solving the above equation for t.

t = sqrt(-2*d/(a+v))

t = sqrt(-2*0/(-9.8+2.13))

t = sqrt(2*2.13/(9.8-2.13))

t = sqrt(4.26/7.67)

t = sqrt(0.555)

t = 0.745s

To get the time in milliseconds:

t = 0.745s * 1000ms/s = 745 ms

Therefore, the time it takes for the ball to reach its maximum height is 745 milliseconds.

To learn more about time from the given link:

https://brainly.com/question/26046491

#SPJ4

Q is the charge's magnitude, V is its velocity, X is the angle formed by the magnetic field's direction and the charge's motion, and B is the strength of the magnetic field.

We must divide this amount by the mass of the charged particle or particles in order to determine the acceleration. Its speed at a later time is 1. 20 Mm/s (non relativistic because v is much less than the speed of light). When a refractive index diminishes over time, light shifts its frequency, which is referred to as photon acceleration [13,14]. Similar to charged particle acceleration, a rise in group velocity is accompanied by an increase in photon energy, or frequency.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

A jumbo jet can fly its whole length in 20 seconds at a certain speed and has a 284-foot length. The big jet taxied completely past a 710-foot-long hangar in 70 seconds while travelling at the same speed.

In physics, you can get average speed by dividing the total distance travelled by the total time needed to travel that distance. Speed is the rate of change in an object's position, expressed in metres per second. The rate at which an object travels a distance is considered its speed. High speed describes an object that is travelling quickly.

P should represent the plane's length in feet.

20p = (710+p)/20p = 14200+20p 50p = 14200 p = 284ft

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

The plane's speed at the end of 10.0 seconds is 200 m/s and the distance it has travelled is 1750 meters.

The initial speed of the plane, u = 150 m/s

Acceleration of the plane, a = 5 m/s²

Time, t = 10 sec

We can find the plane's speed at the end of 10. 0 seconds by the formula

a = (v - u)/ t

⇒5 = (v - 150)/ 10

⇒50 = v - 150

⇒v = 150 + 50

⇒v = 200 m/s

Now, to find the distance it has travelled we will use the kinematic equation

v² = u² + 2as

⇒200² = 150 ² + 2 × 5 × s

⇒40000 = 22500 + 10s

⇒17500 = 10 s

⇒s = 1750 m

To know more about kinematic, here

https://brainly.com/question/28037202

#SPJ4

The properties of waves are: wavelength, time period.

Sound wave is considered a mechanical wave because it requires medium to travel.

A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.

A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.

Units of time and space can be used to measure the fundamental characteristics of waves. The length between wave crests, or wavelength (L), and the time it takes a wave to pass a fixed point, or period (T), are two characteristics that can be measured directly.

Learn more about  mechanical wave here:

https://brainly.com/question/3101711

#SPJ1

At the instant when a mass is at its equilibrium position when undergoing simple harmonic motion, its instantaneous velocity is its maximum.

Therefore the answer is C. At equilibrium, its instantaneous velocity is at maximum

The simple harmonic motion is periodic motion that oscillates around an equilibrium position. At the equilibrium position, the net force on the mass is zero. Therefore, the mass is not accelerating, so its instantaneous acceleration is zero.

The motion is periodic, meaning it repeats itself at regular intervals of time. In the case of a mass on the end of a spring, the spring exerts a force on the mass that acts to bring it back to its equilibrium position. When the mass is at the equilibrium position, the spring force is zero, and the mass is not accelerating. Therefore, the acceleration is maximum at it ends and decreases to zero at equilibrium position.

The instantaneous velocity is zero at the end as it changes direction of motion, though the acceleration is decreasing from end position to equilibrium, velocity is increasing. The instant after equilibrium position, the acceleration is in opposite direction decreasing the velocity till it is zero at the end position.

To know more on SHM

https://brainly.com/question/29183311

#SPJ4

The acceleration in Case A is four times that of Case B.

Acceleration is the rate of change of velocity of an object. It is the measure of how quickly an object changes its velocity over time, represented by the equation a = (v-u)/t, where a is the acceleration, v is the final velocity, u is the initial velocity, and t is the time. Acceleration can be either positive or negative; a positive acceleration indicates an increase in velocity while a negative acceleration indicates a decrease in velocity.

This is because the acceleration of an object in uniform circular motion is given by the equation a = v^2/r, where a is the acceleration, v is the speed, and r is the radius of the circle. Because the speed in Case A is half that of Case B, the acceleration will be one-fourth that of Case B. However, because the radius in Case A is two times that of Case B, the acceleration will be four times that of Case B.

To learn more about acceleration
https://brainly.com/question/26588495
#SPJ1

0.08 m/s2 is the average acceleration. The acceleration's degree of uncertainty is 0.0135 m/s2.

Accelerations are included in vector quantities. An object's acceleration in relation to a net force is determined by the direction of that force. Force imbalances lead to acceleration in a body.

Uniform, non-uniform, and average acceleration are the three primary types of accelerated motions. It is said to have uniform acceleration when an object moves in a straight line with an increase in speed that happens at regular intervals of time.

Acceleration is the term used to describe any change in the speed or direction of a motion. Anything that is accelerating is moving faster, slower, or in a direction other than straight forward.

To learn more about acceleration visit:

brainly.com/question/12550364

#SPJ4

The tension in the string can be found by using the equation for centripetal force. which is equal to 150.

This equation states that the centripetal force (Fc) is equal to the mass of the object (m) multiplied by the square of the velocity (v) and divided by the radius (r). Therefore,

Fc = m x v²/r.

In this case, the centripetal force is equal to the tension in the string, so the tension in the string (T) can be found by rearranging the centripetal force equation to

T = m x v²/r.

Substituting in the given values for mass (m) and radius (r) gives

T = 0.304 kg x (2.83 m/s)²/0.44 m

T= 150N

Therefore the tension of the string is 150N

Learn more about tension:

https://brainly.com/question/24994188

#SPJ4

The truck bed and the crate's static coefficient of friction, assuming the crate doesn't slide, is 0.400.

Between the truck bed and the crate, there is 0.64 coefficient of static friction. When the bed is in the position depicted, the truck must move quickly to the right in order to make the crate slide.

The resistive friction force (Fr) divided by the normal or perpendicular pushing force (N) yields the coefficient of friction, which is a numerical value. The formula fr = Fr/N is used to represent it.

To know more about static friction visit:-

https://brainly.com/question/13000653

#SPJ4

The graph that best illustrates how the intensity of sound varies as a detector is moved further and further from a stationary source projecting sound in all directions would be an inverse square law graph. This graph would show that the intensity of sound decreases as the distance from the source increases. The intensity of sound is inversely proportional to the square of the distance from the source.

This means that if the distance from the source is doubled, the intensity of sound is decreased by a factor of four. This relationship is commonly observed in physics and engineering and is known as the inverse square law of sound propagation. This law states that the intensity of sound decreases as the distance from the source increases in a manner that is inversely proportional to the square of the distance.

Read more about wave propagation:

https://brainly.com/question/9349349

#SPJ4

The correct option is B, The electron's speed at f is equal to its speed at i.

Electrons are subatomic particles that are found in atoms. They are the negatively charged particles that orbit the nucleus of the atom, and they have an extremely small mass. Electrons travel at different speeds depending on their energy level. At their lowest energy level, electrons move at an extremely slow speed, about one thousandth of the speed of light. As the electrons gain energy, their speed increases.

In a vacuum, when electrons have the highest energy level, they can travel at a speed of nearly the speed of light, which is around 186,000 miles per second. In a vacuum, the electrons would have the same speed regardless of their mass. Electrons also move slower inside a material, such as a metal, due to the presence of other atoms. Electrons in metals usually move at a speed of about 1/10th the speed of light. This slower speed is due to the electrons having to pass through energy barriers created by the other atoms in the metal. In general, electrons are very fast particles that can travel at speeds up to nearly the speed of light.

To learn more about Electron's speed visit here:

brainly.com/question/14827627

#SPJ4

These tides occur twice each lunar month throughout the entire year. When the earth, moon, and sun are all in alignment, neap tides are produced by the sun's gravitational pull amplifying that of the moon.

Instead, the phrase refers to the idea of the tide "springing forth." Regardless of the season, spring tides happen twice each lunar month. Neap tides happen when the sun and moon are at right angles to one another, which also happens twice a month.

The sun, the form of the ocean, and the moon all have an impact on how much or little the tide rises or falls on Earth. Moon tides are the results of the moon's influence on the Earth's tides. The major subject of this article is moon tides.

To learn more about tides visit:

brainly.com/question/9493666

#SPJ4

Answer:

But the safest way to loosen a tight cap may be to run hot water on it so that it expands slightly.

Explanation: