A BODY WEGIHT 6N IN AIR 5N IN WATER
WHATE IS VOLUME OF BODY

Answers

Answer 1

the volume of the body is approximately 0.1199 cubic meters.

To find the volume of the body, we can use Archimedes' principle, which states that the weight of a fluid displaced by an object is equal to the buoyant force acting on the object.

In this case, the buoyant force acting on the body in water is equal to the weight of the water displaced by the body. Since the body weighs 5 N in water, it displaces 5 N of water.

The weight of the body in the air is 6 N, which is greater than the weight of the water displaced by the body. This means that the body sinks in water and has a density greater than that of water.

We can use the formula for density, which is density = mass/volume, to find the volume of the body. We know that the mass of the body is equal to its weight divided by the acceleration due to gravity, which is approximately 9.81 m/[tex]S^{2}[/tex]. Therefore:

mass = 6 N / 9.81 [tex]m/s^{2}[/tex]= 0.611 kg

Since the density of water is 1000 [tex]kg/m^{3}[/tex], we can set up the following equation to solve for the volume of the body:

density of body * volume of body = mass of body

density of body * V = 0.611 kg

the density of body = 0.611 kg / V

The density of the body must be greater than 1000 [tex]kg/m^{3}[/tex], the density of water. We can assume that the density of the body is constant and solve for the volume:

density of body = 5 N / (V * 9.81 m/[tex]S^{2}[/tex])

Setting these two equations equal to each other, we get:

0.611 kg / V = 5 N / (V * 9.81m/[tex]S^{2}[/tex])

Solving for V, we get:

V = 0.611 kg / (5 N / 9.81 m/[tex]S^{2}[/tex])

V = 0.1199 m^3

Therefore, the volume of the body is approximately 0.1199 cubic meters.

Learn more about Archimedes' principle:

https://brainly.com/question/787619


Related Questions

abalone that has been collected. They have provided you with the market standards used to estimate an abalone value: Abalone value = [1 + 1/3 (Length - 0.5) + 1/3 (Diameter-0.4) + 1/3 (Height-0.4)] * Whole_weight * $0.5. In addition, If the abalone belongs to Category 1, its value will be multiplied by 1.5; If the abalone belongs to Category II, its value will be multiplied by 0.8. Secondly, they would like to know the average value for each gender.

Answers

To estimate the value of the abalone, we can use the market standards provided: Abalone value = [1 + 1/3 (Length - 0.5) + 1/3 (Diameter-0.4) + 1/3 (Height-0.4)] * Whole_weight * $0.5. This formula takes into account the length, diameter, height, and weight of the abalone to determine its value.

Additionally, we need to consider the category of the abalone. If it belongs to Category 1, its value will be multiplied by 1.5; if it belongs to Category II, its value will be multiplied by 0.8.
To find the average value for each gender, we would need to collect data on the abalone's gender and use the formula above to calculate the value for each abalone. We could then take the average value for all abalones of each gender separately.

learn more about value

https://brainly.com/question/29428318

#SPJ11

a force is applied horizontally to a block to move it up a 30° incline. the incline is frictionless. if f = 70.0 n and m = 5.8 kg , what is the magnitude of the acceleration of the block?

Answers

The magnitude of the acceleration of the block due to the force applied to it horizontally to move it up a 30° incline is approximately 6.03 m/s².

To calculate the acceleration of a block on a frictionless incline, we'll use Newton's second law of motion and consider the component of the applied force parallel to the incline.

First, we determine the force parallel to the incline: F_parallel = F * sin(30°), where F = 70.0 N and sin(30°) = 0.5.

F_parallel = 70.0 N * 0.5 = 35.0 N

Now, using Newton's second law (F = m * a), we can find the acceleration (a) of the block with mass (m) 5.8 kg:

35.0 N = 5.8 kg * a

To find the acceleration (a), divide both sides by the mass (5.8 kg):

a = 35.0 N / 5.8 kg ≈ 6.03 m/s²

The magnitude of the acceleration of the block is approximately 6.03 m/s².

Learn more about acceleration here: https://brainly.com/question/28441255

#SPJ11

A round steel bar A round steel bar having Sy = 800 MPa is subjected to loads producing calculated P TC Mc 4V stresses of — = 70 MPa, 200 MPa, = 300 MPa, and = 170 MPa. J 1 3 A a. Sketch Mohr circles showing the relative locations of maximum normal stress and maximum shear stress. b. Determine the safety factor with respect to initial yielding according to the maximum-shear- stress theory and according to the maximum-distortion-energy theory.

Answers

The safety factor for a round steel bar with Sy=800 MPa, subjected to P=70 MPa, T=200 MPa, M=300 MPa, and V=170 MPa, according to the maximum-shear-stress theory and maximum-distortion-energy theory is 1.47 and 1.51, respectively.


a. To sketch Mohr circles, plot the normal and shear stresses on the axes (σ,τ). Determine principal stresses (σ1, σ2) and maximum shear stress (τmax) using the equations:
σ_avg = (P+M)/2
R = sqrt(((M-P)/2)² + T²)
σ1 = σ_avg + R
σ2 = σ_avg - R
τmax = R

b. For the maximum-shear-stress theory, the safety factor (SF) is calculated as:
SF = Sy / (2 * τmax)

For the maximum-distortion-energy theory, the safety factor is calculated using the von Mises criterion:
SF = sqrt(2) * Sy / sqrt((σ1 - σ2)² + (σ2 - P)² + (P - σ1)²)

Substitute the values and calculate the safety factors for both theories.

To know more about Mohr circles click on below link:

https://brainly.com/question/29757213#

#SPJ11

(a) Find the terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance, if it is being charged by a current of 10.0 A. (b) What is the output voltage of the battery charger?

Answers

(a) The terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance is 6.0 V. (b) The output voltage of the battery charger is 12.0 V.

(a) To find the terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance, while being charged by a current of 10.0 A, we can use the formula:

Terminal voltage = EMF - (Current × Internal resistance)

Here, EMF is the electromotive force, which is 12.0 V, the current is 10.0 A, and the internal resistance is 0.600 Ω.

Terminal voltage = 12.0 V - (10.0 A × 0.600 Ω)
Terminal voltage = 12.0 V - 6.0 V
Terminal voltage = 6.0 V

(b) To find the output voltage of the battery charger, we will add the voltage drop across the internal resistance to the terminal voltage:

Output voltage = Terminal voltage + (Current × Internal resistance)

Output voltage = 6.0 V + (10.0 A × 0.600 Ω)
Output voltage = 6.0 V + 6.0 V
Output voltage = 12.0 V

You can learn more about terminal voltage at: brainly.com/question/28199592

#SPJ11

a constant force acts for a time δt on a block that is initially at rest on a frictionless surface, resulting in a final velocity v.

Answers

When a constant force acts for a time δt on a block that is initially at rest on a frictionless surface, the block will experience an acceleration proportional to the force applied. The acceleration of the block will continue until the force is removed or until the block reaches a maximum velocity.

Assuming that the mass of the block is known, the acceleration can be calculated using Newton's Second Law, which states that force is equal to mass times acceleration (F=ma). Therefore, the acceleration can be calculated as a=F/m.
The final velocity v of the block can be calculated using the formula v=u+at, where u is the initial velocity (zero in this case), a is the acceleration calculated above, and t is the time for which the force is applied (δt in this case).Since the surface is frictionless, there is no opposing force to slow down the block, and hence, the final velocity v of the block will be solely determined by the magnitude of the force applied and the time for which it is applied.

Therefore, the constant force acting for a time δt on a block that is initially at rest on a frictionless surface will result in the block accelerating until it reaches a final velocity v.

For more such questions on Friction, visit:

brainly.com/question/13000653

#SPJ11

2a. to find the electric field at point p, first find the magnitude of electric field at point p due to each charge. (express your answer in terms of 10-6 k.)

Answers

The given units of 10^-6 k, the electric field would be expressed as N/C x 10^-6 k, where N/C is the standard unit for electric field.

To find the electric field at point P, you need to first find the magnitude of the electric field at point P due to each charge. This can be done using Coulomb's Law, which states that the magnitude of the electric field at a point is directly proportional to the magnitude of the charge and inversely proportional to the distance squared between the charge and the point.

So, if you have multiple charges, you would calculate the electric field due to each one individually, and then add up the vectors to get the net electric field at point P.

Learn more about electric here:

https://brainly.com/question/8971780

#SPJ11

a 1700 kgkg car drives around a flat 200-mm-diameter circular track at 35 m/sm/s .What is the magnitude of the net force on the car?

Answers

We can calculate the net force: F_net = 1700 kg * 12.25 m/s^2 = 20,825 N So, the magnitude of the net force on the car is 20,825 N.

The magnitude of the net force on the car can be calculated using the formula F = ma, where F is the net force, m is the mass of the car, and a is the acceleration of the car. To find the acceleration, we can use the formula a = v^2/r, where v is the speed of the car and r is the radius of the circular track (which is half the diameter).
So, first we need to convert the diameter to radius by dividing it by 2:
r = 200 mm / 2 = 100 mm = 0.1 m
Then, we can calculate the acceleration:
a = v^2/r = (35 m/s)^2 / 0.1 m = 12,250 m/s^2
Finally, we can calculate the net force:
F = ma = (1700 kg)(12,250 m/s^2) = 20,825,000 N
Therefore, the magnitude of the net force on the car is approximately 20,825,000 N.

Learn more about net force  here:

https://brainly.com/question/29095936

#SPJ11

How much impulse (in magnitude) stops an object with mass m= 10 kg sliding at v = 3m/s? a. 30 Ns
b. 0.6 kg m/s
c. 60 kg m/s
d. 10 Ns

Answers

a.) The impulse required to stop an object with a mass of 10 kg and velocity of 3 m/s is 30 Ns.

Impulse is defined as the change in momentum of an object, which is equal to the force applied multiplied by the time it acts. In this case, the object has a mass of 10 kg and is moving with a velocity of 3 m/s. To stop the object, a force needs to be applied in the opposite direction of its motion. The impulse required to stop the object can be calculated by multiplying the force applied with the time it acts. Since the impulse is equal to the change in momentum, it can be calculated using the equation  [tex]J = ∆p = mv_f - mv_i.[/tex]  Solving for the force, we get[tex]F = J/t = ∆p/t = m(v_f - v_i)/t = m*a,[/tex]  where a is the acceleration produced by the force. Therefore, the impulse required to stop the object is 30 Ns, which is equivalent to the force of 30 N acting for 1 second.

learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

Consider a pipe of length 60 m in which saturated steam at 300°C is flowing. The pipe is made of copper with thermal conductivity k = 400 W/(m.K). The inner and outer diameters of the pipe are D; = 26 cm and D. = 32 cm, respectively. Outside of the pipe 1 we have air at a temperature To= 20°C and natural convective heat transfer coefficient h= 5 W/(m²K). The cooling of the pipe by air causes some of the steam inside the pipe to condense into saturated liquid, but as you know from Thermodynamics, the temperature inside the pipe does not change upon this condensation. a. Find the steady state temperature profile (temperature as a function of radius) within the pipe wall b. What is the rate at which heat is being removed from the pipe by air? c. What is the temperature at the outer surface of the pipe? d. Bonus point (1 point): What is the rate (in kg/s) at which steam is getting condensed within the pipe?

Answers

A is the surface area of the pipe, Ts is the temperature at the outer surface of the pipe, and To is the temperature of the air.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, which determines the direction of heat flow. It is a scalar quantity that quantifies the hotness or coldness of an object or a system.

a. To find the steady state temperature profile within the pipe wall, we can apply the steady-state heat conduction equation. Since the pipe is made of copper, which is a good conductor of heat, we can assume one-dimensional radial conduction along the radial direction.

The heat conduction equation in cylindrical coordinates is given by:

∂/∂r (r * k * ∂T/∂r) = 0

where:

r is the radial distance from the center of the pipe

k is the thermal conductivity of copper (given as 400 W/(m.K))

T is the temperature

Considering the inner and outer surfaces of the pipe, we can set up the boundary conditions:

At r = r₁ (inner surface of the pipe): T = 300°C (temperature of saturated steam)

At r = r₂ (outer surface of the pipe): T = Tₒ (temperature of air, given as 20°C)

Solving the heat conduction equation with the given boundary conditions, we can obtain the steady state temperature profile within the pipe wall.

b. The rate at which heat is being removed from the pipe by air can be calculated using the convective heat transfer equation, which is given by:

Q = h * A * (T - Tₒ)

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The period of the Moon's rotation is the same as the period of its revolution: 27.3 days (sidereal).
What is the angular momentum for each rotation and revolution? (Because the periods are equal, we see only one side of the Moon from Earth.)

Answers

The angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.

How can angular momentum of the Moon's rotation and revolution can be calculated?

The angular momentum of the Moon's rotation and revolution can be calculated using the formula:

L = Iω

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

For the Moon's rotation, the moment of inertia can be approximated as that of a solid sphere, which is:

I = (2/5)MR^2

where M is the mass of the Moon and R is its radius.

The angular velocity can be calculated as:

ω = 2π/T

where T is the period of rotation, which is 27.3 days.

Substituting these values, we get:

L_rotation = (2/5)MR^2 * (2π/27.3 days)

For the Moon's revolution, the moment of inertia can be approximated as that of a point mass, which is:

I = MR^2

where M is the mass of the Moon and R is the radius of its orbit around the Earth.

The angular velocity can be calculated as:

ω = 2π/T

where T is the period of revolution, which is also 27.3 days.

Substituting these values, we get:

L_revolution = MR^2 * (2π/27.3 days)

Since the period of rotation and revolution is the same, both angular momenta have the same value. Therefore, we can simplify the equations to:

L = (2/5)MR^2 * (2π/27.3 days)

and

L = MR^2 * (2π/27.3 days)

which both simplify to:

L = (2π/27.3 days) * (M*R^2)

Using the known values for the mass and radius of the Moon (M = 7.342 × 10^22 kg, R = 1.737 × 10^6 m), we can calculate the angular momentum:

L = (2π/27.3 days) * (7.342 × 10^22 kg * (1.737 × 10^6 m)^2)

L = 6.68 × 10^33 kg m^2/s

Therefore, the angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.

Learn more about Moon's rotation

brainly.com/question/15672596

#SPJ11

the transfer of 100 kj of heat to a large mass of water at 0°c (273 °k) results in change in entropy, δs, of how much in j/°k?

Answers

In this case, q = 100 kJ and T = 273 K, so: δs = (100 kJ) / (273 K) = 0.366 kJ/K. The change in entropy (δs) of the transfer of 100 kJ of heat to a large mass of water at 0°C (273 K) can be calculated using the formula δs = q/T, where q is the heat transfer and T is the temperature in Kelvin.

Therefore, the change in entropy (δs) for the transfer of 100 kJ of heat to a large mass of water at 0°C is 0.366 kJ/K. This means that there is an increase in the randomness or disorder of the system due to the transfer of heat.

It is important to note that entropy is a state function, meaning that the change in entropy is independent of the path taken to achieve that change.

To know more about entropy, refer here:

https://brainly.com/question/24278877#

#SPJ11

to what potential should you charge a 0.600 μf capacitor to store 1.60 j of energy

Answers

To store 1.60 j of energy, the capacitor of 0.600 μf must be charged to a potential of 2.31 kV.

To find the potential needed to charge a 0.600 μF capacitor to store 1.60 J of energy, we can use the formula for the energy stored in a capacitor:

Energy (E) = (1/2) × Capacitance (C) × Voltage^2 (V²)

We are given the energy (E = 1.60 J) and the capacitance (C = 0.600 μF), and we need to find the voltage (V).

1. Rearrange the formula to solve for V:

V² = (2 × E) / C

2. Plug in the given values:
V² = (2 × 1.60 J) / (0.600 μF)

3. Calculate the result:
V² = 5.333... (rounded to the nearest thousandth)

4. Take the square root of both sides to find V:
V = √5.333...

5. Calculate the final value for V:
V = 2.31 kV (rounded to the nearest hundredth)

So, you should charge the 0.600 μF capacitor to a potential of 2.31 kV to store 1.60 J of energy.

Learn more about capacitor:

https://brainly.com/question/27393410

#SPJ11

capacitor is charged with a total charge of q = 7.5E-05 C. The capacitor is wired in series with a resistor, R-8. Input an expression for the time constant, τ, of this circuit using the variables provided and C for capacitance.What is the value of the time constant in s if the capacitor has capacitanceHow long will it take the capacitor to discharge half of its charge in seconds?

Answers

The time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds.

The time constant of an RC circuit, denoted by τ, is given by the expression: τ = RC. where R is the resistance in ohms, and C is the capacitance in farads.

In this case, the capacitor is wired in series with a resistor of 8 ohms, and we are given the charge q on the capacitor. We can use the formula for the capacitance of a capacitor to determine its value: C = q/V

where V is the voltage across the capacitor. Since the capacitor is fully charged, the voltage across it is the maximum voltage that it can hold, which is determined by the capacitance and the charge: V = q/C

Substituting the given values, we get:

V = (7.5×10⁻⁵ C)/(C)

Solving for C, we get:

C = (7.5×10⁻⁵ C)/(V)

Substituting this value of C and the given resistance value into the expression for τ, we get:vτ = RC = (8 Ω)(7.5×10⁻⁵ C)/(V)

τ = (8 Ω)(7.5×10⁻⁵ s)/C

To determine the time it takes for the capacitor to discharge half of its charge, we can use the formula for the charge on a capacitor as a function of time in an RC circuit:

q(t) = q₀e^(-t/τ)

where q₀ is the initial charge on the capacitor (which is given as 7.5×10⁻⁵ C), and τ is the time constant of the circuit. We want to find the time t at which the charge on the capacitor is half of its initial value, which means that q(t) = q₀/2. Substituting this value and the given values for q₀ and τ, we get:

q₀/2 = q₀e^(-t/τ)

Solving for t, we get:

t = -τ ln(1/2) = τ ln(2)

Substituting the value of τ that we calculated above, we get:

t = (8 Ω)(7.5×10⁻⁵ s)/C × ln(2)

Substituting the value of C that we calculated above, we get:

t = (8 Ω)(7.5×10⁻⁵ s)/[(7.5×10⁻⁵ C)/(V)] × ln(2)

Simplifying, we get:

t = 8 V ln(2) s

Therefore, the time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds. Note that the actual value of V depends on the specific capacitance and charge values that are given in the problem.

To learn more about capacitor here:

https://brainly.com/question/17176550

#SPJ11

if a toaster oven is labeled as 1 kw. if it is connected to a 120 v source.
(a) What current (in A) does the toaster carry?
(b) What is its resistance (in Ω)

Answers

a) The toaster carries a current of 8.33 A.

b) The resistance of the toaster oven is approximately 14.4 Ω.


(a) To find the current (in A) that the toaster carries, we can use the formula:

Power (P) = Voltage (V) × Current (I)

We're given that the toaster oven is labeled as 1 kW, which means the power (P) is 1000 W (since 1 kW = 1000 W). We also know that the voltage (V) is 120 V. We can rearrange the formula to solve for the current (I):

I = P / V

Now, plug in the given values:

I = 1000 W / 120 V

I = 8.33 A

Therefore, the toaster has an 8.33 A current.

(b) To find the resistance (in Ω) of the toaster, we can use Ohm's Law:

Voltage (V) = Current (I) × Resistance (R)

We know the voltage (V) is 120 V, and we found the current (I) to be 8.33 A. Now, we can rearrange the formula to solve for the resistance (R):

R = V / I

Now, plug in the given values:

R = 120 V / 8.33 A

R ≈ 14.4 Ω

Therefore, the toaster oven has a resistance of about 14.4.

Learn more about "resistance": https://brainly.com/question/17563681

#SPJ11

Two loudspeakers in a plane, 5.0 m apart, are playing the same frequency. If you stand 12.0 m in front of the plane of the speakers, centered between them, you hear a sound of maximum intensity. As you walk parallel to the plane of the speakers, staying 12.0 m in front of them, you first hear a minimum of sound intensity when you are directly in front of one of the speakers. What is the frequency of the sound? Assume a sound speed of 340 m/s.

Answers

The frequency of the sound is 68 Hz, which is found by dividing the speed of sound by the wavelength, where the wavelength is determined by the path difference between the two speakers.

To find the frequency of the sound, we need to consider the path difference and the speed of the sound. When you hear maximum intensity, the path difference is a whole number multiple of the wavelength (constructive interference). When you hear minimum intensity, the path difference is a half-integer multiple of the wavelength (destructive interference).
In this case, when you're in front of one speaker, the path difference is half the distance between the speakers (5.0 m / 2 = 2.5 m). This corresponds to a half-integer multiple of the wavelength, meaning (2n + 1) * (wavelength / 2) = 2.5 m, where n is an integer.
Let's consider the smallest value of n, which is 0. Then, the wavelength is 5.0 m.
To find the frequency, we can use the equation:
frequency = speed of sound/wavelength
frequency = 340 m/s / 5.0 m
frequency = 68 Hz
So, the frequency of the sound is 68 Hz.

learn more about frequency here:

https://brainly.com/question/30611426

#SPJ11

Hypothesis: The Elodea plants will perform photosynthesis and cellular respiration when placed in light and will only perform cellular respiration when placed in the dark. How is the dependent variable measured to test this hypothesis?
a. amount of carbon dioxide present
b. amount of oxygen present
c. number of Elodea plants
d. number of snails
e. amount of light
f. color of bromothymol blue

Answers

To test the given hypothesis, the dependent variable that needs to be measured is the amount of oxygen present. This is because photosynthesis produces oxygen as a byproduct and cellular respiration consume oxygen as a reactant.

When the Elodea plants are placed in light, they are expected to perform both photosynthesis and cellular respiration, leading to an increase in the amount of oxygen present.

On the other hand, when the Elodea plants are placed in the dark, they are expected to only perform cellular respiration, leading to a decrease in the amount of oxygen present. By measuring the amount of oxygen present in both light and dark conditions, we can determine if the hypothesis is supported or not.

The other options, such as the amount of carbon dioxide present, number of Elodea plants, number of snails, amount of light, and color of bromothymol blue are not directly related to the hypothesis and do not provide a clear indication of whether the plants are performing photosynthesis or cellular respiration.

To know more about photosynthesis refer here:

https://brainly.com/question/29775046#

#SPJ11

find the total work done​

Answers

The total work done by the gas from D to E to F is 450J

How to solve

To calculate the total work done by the gas as it undergoes a change in state from point D to point E to point F, we need to consider the changes in pressure and volume.

The change in pressure (DF) is determined by subtracting the initial pressure of 300 N/m^2 from the final pressure of 600 N/m^2, resulting in a pressure difference of 300 N/m^2.

Similarly, the change in volume (FE) is calculated by subtracting the initial volume of 2.0 m^3 from the final volume of 5.0 m^3, resulting in a volume difference of 3.0 m^3.

Using the formula for the area of a triangle, we can determine the work done by the gas during the process.

The area of triangle DEF is half of the product of the pressure difference and the volume difference, which results in a value of 450 J.

Therefore, the total work done by the gas from D to E to F is calculated as 450 J

Read more about work done here:

https://brainly.com/question/8119756

#SPJ1

An object moves with simple harmonic motion on a smooth table. If the amplitude and the period are both doubled, the object's maximum speed is A. Quartered B. Quadrupled C. Doubled D. Unchanged

Answers

The maximum speed of the object will double as well.

Simple harmonic motion is a type of motion where the object oscillates back and forth with a constant period and amplitude. The maximum speed of the object occurs when it passes through the equilibrium point, where its velocity is at its maximum.When the amplitude and period are both doubled, the motion of the object becomes more exaggerated, meaning that it will oscillate over a greater distance and take longer to complete one cycle. However, the maximum speed of the object will still occur at the equilibrium point, where the acceleration is at its maximum.
Since the period is doubled, the time it takes for the object to complete one cycle is also doubled. This means that the object will spend twice as much time at the equilibrium point, where its maximum speed occurs. Therefore, the maximum speed of the object will double as well.
So, the correct answer is C. Doubled.

learn more about harmonic motion Refer: https://brainly.com/question/30404816

#SPJ11

Consider a circuit that contains three resistors of different values in siries with a battery. The sum of potential differences across all three resistors should be: a. equal to the potential difference of the battery b. more than the potential difference of the battery c. less than the potential difference of the battery d. Zero

Answers

In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.

In a series circuit, the total voltage across the resistors is distributed among them according to their resistances. Kirchhoff's Voltage Law states that the algebraic sum of the potential differences in any closed loop or mesh in a network is equal to zero. Therefore, the sum of the voltages across the individual resistors must be equal to the voltage supplied by the battery. The potential differences across the resistors depend on their individual resistance values and the current flowing through them.

Since the current remains the same in a series circuit, the potential differences are directly proportional to the resistances. In summary, the sum of potential differences across all three resistors in a series circuit is equal to the potential difference of the battery. In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.

Learn more about Kirchhoff's Voltage Law at:

https://brainly.com/question/30400751

#SPJ11

the rotating parts of a turbine of a jet engine have a 38-kg⋅m2 rotational inertia.. What is the average torque needed to accelerate the turbine from rest to a rotational velocity of 190 rad/s in 23 s ?

Answers

The turbine requires an average torque of 809,900 N.m to accelerate it from rest to a rotational velocity of 190 rad/s in 23 s.

How can I calculate average torque?

Between the pivot point and the location where the force is delivered, measure the distance, r. Calculate the angle between the vector connecting the force's application point and the pivot point and the direction of the applied force. You may calculate the torque by multiplying r by F and sin.

The relationship between the turbine's rotational inertia and its angular velocity and torque may be found using the rotational kinetic energy formula:  K_rot = (1/2) * I * w²

We can rearrange this equation to solve for the torque (T):

T = (I * w^2) / 2

We may first get the angular acceleration (alpha) by using the following formula to determine the torque required to accelerate the turbine from rest to a rotating velocity of 190 rad/s in 23 s.

alpha = w / t

where t is the time taken to reach the final angular velocity.

alpha = (190 rad/s) / (23 s) = 8.261 rad/s²

Next, we can use the formula for torque to calculate the average torque needed:

T = (I * w²) / 2

T = (38 kg.m²) * (190 rad/s)² / (2)

T = 809,900 N.m

To know more about torque visit:-

https://brainly.com/question/29024338

#SPJ1

what is the resistance (in ω) of twenty 305 ω resistors connected in series?

Answers

The resistance (in ω) of twenty 305 ω resistors connected in series is 6,100 ω.

The resistances in a circuit are connected either in series or in parallel. In a series circuit, the total resistance is the sum of all individual resistances. The resistance (in ω) of twenty 305 ω resistors connected in series can be calculated using the formula for series resistors: R_total = R1 + R2 + ... + Rn. Since all resistors have the same resistance (305 ω), the calculation becomes:

R_total = 20 × 305 ω = 6100 ω

Therefore, twenty 305 ω resistors connected in series will result to a total resistance of 6100 ω.

Learn more about resistance here: https://brainly.com/question/28135236

#SPJ11

When kicking a football, the kicker rotates his leg about the hip joint
a. if the velocity of the tip of the kicker’s shoe is 33 m/s and the hip joint is 0.95 m from the tip of the shoe, what is the shoe tip’s angular velocity in rad/s?
b. The Shoe is in Contact with the initally nearly
Stationary 8.500kg
20.0 ms. What average
force is exerted on the football in Newtons to
give it a velocity of 22 m/s?
Football for
c. What is the maximum range of the football in
neglecting
air resistance?

Answers

The shoe tip's angular velocity is 34.74 rad/s. The maximum range of the football neglecting air resistance is 50.07 meters.

a. We may apply the formula to get the angular velocity of the shoe tip:

v = ωr

Substituting the values, we get:

ω = v / r = 33 m/s / 0.95 m = 34.74 rad/s

b. To find the average force exerted on the football, we can use the impulse-momentum theorem, which states that:

Impulse = Change in momentum

The impulse is given by the formula:

Impulse = FΔt

Δp = mΔv

Substituting the values, we get:

FΔt = mΔv

F = mΔv / Δt = (8.5 kg)(22 m/s - 0 m/s) / (0.02 s) = 9350 N

Therefore, the average force exerted on the football is 9350 Newtons.

c. To find the maximum range of the football neglecting air resistance, we can use the range equation, which is given by:

R = ([tex]v^2[/tex]/g) * sin(2θ)

Since the football is being kicked, we can assume that it is projected at an angle of 45 degrees to the horizontal, which gives:

[tex]R = (22 m/s)^2 / (2*9.81 m/s^2) * sin(90\textdegree ) = 50.07 meters[/tex]

Air resistance, also known as drag, is a force that opposes the motion of an object as it moves through the air. When an object moves through the air, it collides with air molecules, causing them to move out of the way and create a region of low pressure behind the object. This creates a force that acts in the opposite direction of the object's motion, slowing it down.

The amount of air resistance an object experiences depends on its size, shape, and speed, as well as the properties of the air through which it is moving. For example, streamlined objects like airplanes and rockets are designed to minimize air resistance in order to maximize their speed and efficiency.

To learn more about Air resistance visit here:

brainly.com/question/11019447

#SPJ4

A combination of three electrons and two protons would have a net charge q. calculateq?​

Answers

A combination of three electrons and two protons would have a net charge of -1.

A single electron has a negative charge of -1, while a single proton has a positive charge of +1. Therefore, three electrons would have a total negative charge of -3, and two protons would have a total positive charge of +2. To find the net charge, we need to add the total negative charge from the total positive charge:

q = (+2) + (-3)

q = -1

q = -1

Therefore, a combination of three electrons and two protons would have a net charge of -1.
To calculate the net charge q of a combination of three electrons and two protons, we need to consider the charge of each particle. Electrons have a negative charge of -1 and protons have a positive charge of +1 (measured in elementary charge units).

Step 1: Determine the total charge of electrons.
Since there are three electrons, their total charge is:
3 electrons * (-1) = -3

Step 2: Determine the total charge of protons.
Since there are two protons, their total charge is:
2 protons * (+1) = +2

Step 3: Calculate the net charge q by adding the charges of electrons and protons together.
q = total charge of electrons + total charge of protons
q = -3 + 2

The net charge q is:
q = -1

Learn more about net charge here:

https://brainly.com/question/30758689

#SPJ11

A 55-gram ice cube at 0∘C is heated until 45g has become water at 100∘C and 10g has become steam at 100∘C. How much energy was added to accomplish the transformation?

Answers

The energy added to accomplish the transformation of the ice cube was 18,828 J. To calculate the energy added to transform the ice cube, we need to use the formula Q = m * ΔT * C, where Q is the energy added, m is the mass of the substance, ΔT is the change in temperature, and C is the specific heat capacity.

First, we need to find the energy required to melt the ice cube, which is Q = 55g * (0∘C - 0∘C) * 333 J/g⋅∘C = 0 J.

Next, we need to find the energy required to heat the water from 0∘C to 100∘C, which is Q = 45g * (100∘C - 0∘C) * 4.184 J/g⋅∘C = 18,828 J.

Finally, we need to find the energy required to vaporize 10g of water at 100∘C, which is Q = 10g * (100∘C - 100∘C) * 2,257 J/g = 0 J.

Adding all of the energy requirements together, we get:

0 J + 18,828 J + 0 J = 18,828 J.

To know more about energy refer here:

https://brainly.com/question/1932868#

#SPJ11

What is the speed of a .28 kg baseball if its kinetic energy is 200J?

Answers

Answer: The speed of the baseball is approximately 71.4 m/s

Explanation: The formula for kinetic energy is KE = 1/2 * m * v^2, where KE is kinetic energy, m is the mass of the object, and v is its velocity/speed.

Rearranging the formula to solve for v, we get:

v = sqrt(2 * KE / m)

Substituting the given values, we get:

v = sqrt(2 * 200J / 0.28 kg)

v = sqrt(1428.57 m^2/s^2 / 0.28 kg)

v = sqrt(5102.46 m^2/s^2/kg)

v = 71.4 m/s

A cylindrical wire has a resistance R and resistivity p. If its length and diameter are BOTH cut in half. (a) what will be its resistance? A)4R B)2R C)R D)R/2 E)R/4 (b) What will be its resistivity? A)4p B)2p D) p12 E)p/4

Answers

the length and diameter are both cut in half, the resistance will be multiplied by (1/2)/(1/4) = 2. This means the answer to (a) is (B) 2R.

The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area (diameter squared). Therefore, if the length and diameter are both cut in half, the resistance will be multiplied by (1/2)/(1/4) = 2. This means the answer to (a) is (B) 2R.

The resistivity of a material is a constant that depends on the material itself, not on the dimensions of the wire. Therefore, cutting the length and diameter in half will not affect the resistivity. The answer to (b) is (B) 2p.
(a) To calculate the new resistance, we can use the formula R = ρ(L/A), where L is the length, A is the cross-sectional area, and ρ is the resistivity. After cutting both the length and diameter in half, the new length L' = L/2 and the new diameter D' = D/2. The new cross-sectional area A' = π(D'/2)^2 = (1/4)π(D/2)^2 = A/4. Therefore, the new resistance R' = ρ(L'/A') = ρ((L/2)/(A/4)) = 4ρ(L/A) = 4R. So the answer is A) 4R.

(b) Resistivity is a material property and is not affected by changes in length or diameter. Therefore, the new resistivity will be the same as the original resistivity, which is D) p.

To know more about Resistivity is a material click here:

brainly.com/question/31085138

#SPJ11

Enter the number of each atom needed to balance the following equation.

____ FeO + ____ PdF2
____ FeF2 + ____ PdO

Answers

Ferrous fluoride + Palladium(II) oxide = 1 Iron(II) oxide + 1 Palladium(II) fluoride As a result, the balanced equation calls for: 1 Iron(II) oxide, 1 Palladium(II) fluoride, 1 ferrous fluoride, and 1 Palladium(II) oxide.

How may ferric oxide be acquired?

Iron (III) oxide, sometimes referred to as ferric oxide, is the end product of iron oxidation. This can be produced in a laboratory setting by electrolyzing sodium bicarbonate solution, a harmless electrolyte. The hydrated iron(III) oxide that results is dehydrated at around 200 °C.

How is iron dioxide created?

We show that the mineral goethite, ferric oxyhydroxide, which is found everywhere as "rust" and is concentrated in bog iron ore, decomposes at the deep lower-mantle conditions to form iron dioxide and liberate hydrogen.

To know more about equation visit:-

https://brainly.com/question/30396488

#SPJ1

Consider the following types of electromagnetic radiation: (1) radio waves, (2) infrared, (3) ultraviolet, (4) visible, (5) microwave, (6) x-ray.
Arrange them in the indicated orders, from lowest to highest, by entering numbers by order in the boxes below.
a. Arrange them in order of increasing wavelength.
b. Arrange them in order of increasing frequency
c. Arrange them in order of increasing energy.

Answers

The types of electromagnetic radiation arranged in order of increasing wavelength are (6) X-ray, (3) Ultraviolet, (4) Visible, (2) Infrared, (5) Microwave, (1) Radio waves.

In order of increasing frequency, they are (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.

Lastly, in order of increasing energy, the order is (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.


Electromagnetic radiation is composed of photons, which are particles that carry energy. They can be characterized by their wavelength, frequency, and energy. The relationship between these properties is given by the formula: Energy = (Planck's constant) x (Speed of light) / Wavelength.

Wavelength and frequency are inversely proportional, so as wavelength increases, frequency decreases. Since energy is directly proportional to frequency, higher frequency means higher energy. Therefore, the order of increasing wavelength is the reverse order of increasing frequency and energy.

To know more about electromagnetic radiation click on below link:

https://brainly.com/question/10759891#

#SPJ11

Four 240-Ω lightbulbs are connected in series. what is the total resistance of the ciruit? what is their resisance if they are connacted in parellel?

Answers

The total resistance of the circuit when the lightbulbs are connected in parallel is 60 Ω.

How we can lightbulbs series  are connacted in parellel?

When resistors are connected in series, their resistances add up to give the total resistance of the circuit. In this case, since there are four 240-Ω lightbulbs connected in series, the total resistance of the circuit is:

R_total = R1 + R2 + R3 + R4

= 240 Ω + 240 Ω + 240 Ω + 240 Ω

= 960 Ω

So the total resistance of the circuit is 960 Ω.

When resistors are connected in parallel, the reciprocal of their resistances add up to give the reciprocal of the total resistance of the circuit. In this case, since there are four 240-Ω lightbulbs connected in parallel, the resistance of each lightbulb is:

1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4

= 1/240 Ω + 1/240 Ω + 1/240 Ω + 1/240 Ω

= 4/240 Ω

= 1/60 Ω

So the resistance of each lightbulb when connected in parallel is 1/60 Ω.

To find the total resistance of the circuit when the lightbulbs are connected in parallel, we can use the formula:

R_total = 1/(1/R1 + 1/R2 + 1/R3 + 1/R4)

Substituting in the values, we get:

R_total = 1/(1/240 Ω + 1/240 Ω + 1/240 Ω + 1/240 Ω)

= 60 Ω

Learn more about resistance

brainly.com/question/30799966

#SPJ11

a) A square loop of wire with sides of length 40 cm is in a uniform magnetic field perpendicular to its area. If the field’s strength is initially 100 mT and it decays to zero in 0.010 s, what is the magnitude of the average emf induced in the loop? b) What would be the average emf if the sides of the loop were only 20 cm?

Answers

The magnitude of the average emf induced in the loop would be:

|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.

a) The magnetic flux through the loop is given by:

Φ = BA,

where B is the magnetic field strength and A is the area of the loop. Since the loop is square, we have A = (0.4 m)² = 0.16 m².

During the 0.010 s interval, the magnetic field changes at a constant rate from 100 mT to 0, so the average magnetic field strength is:

Bavg = (100 mT + 0)/2 = 50 mT = 0.05 T.

Using Faraday's law, the induced emf is given by:

ε = -dΦ/dt,

where dΦ/dt is the rate of change of magnetic flux through the loop.

The magnetic flux through the loop changes as:

ΔΦ = BavgA = (0.05 T)(0.16 m²) = 0.008 Wb.

Therefore, the magnitude of the average emf induced in the loop is:

|ε| = ΔΦ/Δt = (0.008 Wb)/(0.010 s) = 0.80 V.

b) If the sides of the loop were only 20 cm, then the area of the loop would be A = (0.2 m)² = 0.04 m². The magnetic flux through the loop would be:

ΔΦ = BavgA = (0.05 T)(0.04 m²) = 0.002 Wb.

Therefore, the magnitude of the average emf induced in the loop would be:

|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.

Learn more about magnetic flux

https://brainly.com/question/30858765

#SPJ4

Other Questions
Achondroplasia across the species Find the MacLaurin series for f(x) = arctan(x) and its radius of convergence/ The CI-C-Cl bond angle in the CCl2O molecule (C is the central atom) is slightly ____. O greater than 109.5 Ogreater than 90 Oless than 109.5 Oless than 120 Ogreater than 120 (5.2.2 WP Consider the joint distribution in Exercise 5.1.1. Determine the following: a. Conditional probability distribution of Y given that X = 1.5 b. Conditional probability distribution of X that Y = 2 C. E( Y X = 1.5) d. Are X and Y independent? A company has net sales of $915,000 and cost of goods sold of $607,000. Its net income is $109,500. The company's gross margin and operating expenses, respectively, are: Multiple Choice $308,000 and $410,500 $308,000 and $109,500 $308,000 and $198,500 $716,500 and $198,500 $198,500 and $109,500 "What are the two types of cross-site attacks? (Choose all that apply.) a. cross-site input attacks b. cross-site scripting attacks c. cross-site request forgery attacks d. cross-site flood attacks" In fruit flies, red eyes are dominant (E). White eyes are recessive (e). If the female fly has white eyes and the male fly has homozygous dominant red eyes, what are the possible phenotypes and genotypes of their offspring? What is the rate of reaction (M/s) for the following process if the rate of change for NOBr was measured as -0.5 M/s. 2NOBr(g) 2NO(g) + Br2(g) define depolarization. how does it differ from repolarization? discuss in terms of ions and direction of ion movement. how to create a 0.25 microf capacitor Find the surface area ofa right cylinder with aradius of 2.5 feet and aheight of 7.5 feet.Round your answer tothe nearest hundredth.The surface area is aboutfeet.square What is the minimum clear spacing between parallel rebar in a vertical layer of a column. Consider the following conditions: Fc = 6,000 psi Rebar #: 10 Maximum Aggregate Size, dass = 1 in. a. 1.50 in b. 1.89 in C 1.25 in d. 1.34 in According to ACI-318-19. Chapter 21 and Chapter 9. What is the value of the 'Strength reduction factor', 0, for beam design considering flexion is (Compression load = 0). a 0.60 b. 0.65 C 0.80 d. 0.90 What is the volume of the rectangular prism?A rectangular prism where the area of the base is 12 square centimeters and the height is 7 centimeters. 84 cm3 84 cm2 19 cm3 19 cm2 Is the below statement true or false? Explain.Assuming that all else remains constant, the length of a confidence interval for a population mean increases whenever the confidence level and sample size increase simultaneously. A block of mass M on a horizontal surface is connected to the end of a massless spring of springconstant k . The block is pulled a distance x from equilibrium and when released from rest, theblock moves toward equilibrium. What coefficient of kinetic friction between the surface and theblock would allow the block to return to equilibrium and stop? how many groups of ten questions con- tain four that require proof and six that do not? Solve for a. 38.5 58.5 a = [ ? ] Can someone help me interpret/analyze the meaning of the poem Chronic Town by Debra Allbery? how could you prove the substance you extracted was dna? let p(n) be the predicate "whenever 2n 1 players stand at distinct pairwise-distances and play arena dodgeball, there is always at least one survivor." prove this by induction 1