Answer:
acceleration is 1.6 m/s^2
Explanation:
This is a question involving Kinematics so we can use one of the kinematic equations.
Given info: Vi= 2.6 m/s. Vf= 15.4 m/s. T= 8s
We need to solve for acceleration
The best equation to use is (Vf = Vi + at) as it contains all the info we need to solve for acceleration.
Now substitute the values given into the equation.
Vf = Vi + at >> 15.4 = 2.6 + a8
Now solve for a by rearranging the equation.
15.4 -2.6= 8a >> 12.8=8a >> 12.8/8= 8a/8 >> 1.6 =a
NOTES:
Acceleration is the rate of increase of velocity
Vf is final velocity or velocity after acceleration/de-accaeleration occurs
Vi is intial velocity or velocity before acceleration or de-accaeleration occurs
Time is time it took for a certain motion to occur.
An object moves along the x-axis. The graph shows its position x as a function of time t. Find the average velocity of the object from points B to C. −8.3 m/s −4.2 m/s 0 m/s −0.12 m/s
Answer:
-8.3m/s
Explanation:
its correct
Answer: its 0.
Explanation: Gradpoint
How to keep your community clean
Answer:
Work with the local civic groups to identify and eliminate eyesores, and beautify the local environment
Pick up a piece of litter every day
Keep a litter bag in your car or your recreational vehicle so you dispose of litter properly
Create a trash fishing contest in your waterway to increase awareness about illegal dumping and littering
Write a letter to the editor of your local newspaper asking others to respect public lands and keep them clean
Help your local schools conduct recycling drives and clean-up projects
Create a beautiful green space by planting trees and shrubs in an area in need of improvement.
Ask local businesses to adopt-a-spot and take care of it
Paint and fix up playground equipment
Organize a paint-out with family and friends and create a community paintbrush mural over a wall of illegal graffiti
Recycle your old tires
Report graffiti to your local authorities
Donate your old computer equipment or dispose of it properly
Conduct a recycling drive in your neighborhood or your business
Volunteer to help your employer conduct paper recycling drives at work
Donate gently used clothes to needy organizations and shelters and identify other items that you can reuse
Compost yard and food waste and seek advice if you don’t know how
Find out how pollution in storm drain runoff can impact our aquifers and ecosystems and be passionate about doing your part to reduce litter and solid waste
Ask your local government officials to establish regular community improvement activities and to support and promote volunteer efforts
Help your library establish an environmental corner that offers books and other educational materials about taking care of the Earth
WHY DONT TWO OBJECTS MOVE TOWARDS EACH OTHER DUE TO GRAVITATIONAL PULL BETWEEN THEM
Answer:
Although the gravitational force the Earth exerts on the objects is different, their masses are just as different, so the effect we observe (acceleration) is the same for each. The Earth's gravitational force accelerates objects when they fall. It constantly pulls, and the objects constantly speed up.
How long should a spring be stretched for it to store 45 J of energy? The force constant of the spring is
540N/m?
Answer:
x = 0.4 m
Explanation:
When a spring is stretched from its equilibrium position. Some energy is stored in the spring. This energy is called the elastic potential energy of the spring. The formula used to calculate the magnitude of this stored energy is given as follows:
P.E = (1/2)kx²
where,
P.E = Elastic Potential Energy Stored in the spring = 45 J
k = Spring Constant = 540 N/m
x = amount of stretching = ?
Therefore,
45 J = (1/2)(540 N/m)x²
x² = (45 J)(2)/(540 N/m)
x = √(0.167 m²)
x = 0.4 m
A plane takes off at an angle of 30 degrees at a speed of 150 km/h. Determine the horizontal
and vertical components of this velocity vector.
Answer:
Horizontal Component = 129.9 km/h
Vertical Component = 75 km/h
Explanation:
When a vector is resolved on the x-axis and the y-axis, the components so formed are called its rectangular components. The component along y-axis is called the vertical component and the component along x-axis is called horizontal component. These components can be given by following formulae:
Horizontal Component = v Cos θ
Vertical Component = v Sin θ
where,
v = velocity = 150 km/h
θ = angle = 30°
Therefore,
Horizontal Component = (150 km/h)(Cos 30°)
Horizontal Component = 129.9 km/h
Vertical Component = (150 km/h)(Sin 30°)
Vertical Component = 75 km/h
A student clicks the mouse at time intervals of 1.60, 2.10, 2.40, 1.90 what is the standard deviation of this dataset.
A. 0.22
B. 0.25
C. 0.29
D. 0.58
How much is the unit price for an order of 80 t-shirts that cost $300?
help me plisssssssss!!!!!!!!
Unit price = (total cost) / (number of units) . . . The unit is 'dollars per shirt'.
Unit price = ($ 300) / (80 shirts)
Unit price = $3.75 / shirt
A 2 kg ball is dropped from the roof of a building 27.5 m tall. How long
does it take to hit the ground?
Answer:
wow I need time to solve dis
Sarah throws a ball directly upward at the edge of a cliff with a starting velocity of 3.0 m/s
It lands on the ground with a final speed of 6.0 m/s
How long is the ball in the air?
Round the answer to two significant digits
Answer:
The correct answer is t = 0.92s
Explanation:
Initial velocity v0 = 3.0 m/s
Displacement Δy = ?
Acceleration a = -9.8m/s2
Final velocity v = -6.0m/s
Time t=? Target unknown
We can use the kinematic formula missing Δy to solve for the target unknown t:
V=v0+at
We can rearrange the equation to solve to t:
V-v0=at
t= v-v0/a
Substituting the known value into the kinematic formula gives:
t= (-6.0m/s)-(3.0m/s)
————————————
-9.8m/s2
= -9m/s
—————-
-9.8m/s2
=0.92s
Sarah throws a ball directly upward at the edge of a cliff with a starting velocity of 3.0 m/s. It lands on the ground with a final speed of 6.0 m/s.
How long is the ball in the air?
Answer: 0.92
A truck covered 2/7 of a journey at an average speed of 40
mph. Then, it covered the remaining 200 miles at another
average speed. If the average for the whole journey was 35
mph, what was the amount of time for the whole journey?
h
Answer:8h
Explanation:
Answer: 8 h
Explanation:
I got it right
Erica forgot to put gas in her car (again) for two weeks. The graph below shows the last few seconds of her car being stalled along Elkins Drive st 7:23 am Friday. During the time shown, what was the acceleration of her car?
a 54 m
b 108 m/s
c 3 m/s^2
D -3 m/s^2
Answer:
Option (D) : - 3 m/s^2
Explanation:
Acceleration = Slope of v-t graph
= 18/6
= - 3 m/s^2 (-ive since the car is decelerating )
Which ball has the greater acceleration at the instant of release?
Ball thrown upward or downward
They're equal.
Ignoring air resistance, any object you're not holding onto has the same, constant acceleration ... 9.8 m/s^2 down ... from the moment it leaves your hand until the moment it hits the ground.
It doesn't matter how heavy the object is, and it doesn't matter whether you throw it up, down, or sideways, or just let go and let it drop.
hey can anyone help me out in dis pls
Answer:
All of the above
Explanation:
Solids have a fixed shape and volume.
Even though the molecules in a solid are vibrating, they can't travel from one part of the solid to the other.
I hope this helps! :)
1. How many energy levels do the electrons in an atom of iron occupy?
Electrons in atoms occupy energy levels, also called electron shells, outside the nucleus. Different shells can hold different maximum numbers of electrons. The electrons in an atom occupy the lowest available energy level first.on:
Answer:
26. Brainliest?
Explanation:
Iron atoms have 26 electrons and the shell structure is 2.8.
When the mass of an object decreases, the force of gravity - Remains Unchanged - Decreases - increases - Becomes irregular
Answer:
Decreases
Explanation More mass=More gravitational pull
Less mass=Less gravitational pull
Hope this helps
Answer:
decreses
Explanation:
Explain what you know about the current structure of the atom. Be sure to include the following:
1. What parts of the atom are located INSIDE the nucleus?
2. What parts of the atom are located OUTSIDE the nucleus?
3. What is the charge (positive/negative/neutral) inside the nucleus?
4. What is the overall charge (positive/negative/neutral) of an atom?
differenciate between emf and potential difference
Answer: 1.Emf is the total voltage in the battery while the potential difference is the work done in moving a charge against the electric field between two specific points in the circuit. 2.Emf is always greater than the potential difference.
Explanation:
To me (electrical engineer since 1973), there is no difference. They are two different names for the same thing.
A 0,34-kg volleyball is flying west at 1,98 m/s when it strikes a stationary 0,60-kg basketball dead centre. The volleyball rebounds east at 0,79 m/s. What will be the velocity of the basketball immediately after impact? Choose the east direction as positive.
Explanation:
use the law of conservation of momentum
M1U1+M2U2=M1V1+M2V2
m-mass
u-initial velocity
v-final velocity
1-volleyball
2-basket ball dead center
so using the above formula
0.34×1.98+0.64×0=0.34×0.79+0.64×V2
to get
0.6732+0 = 0.2686+0.64V2
0.4046=0.64V2
divide both sides by 0.64 to get V2 which is the final velocity of basketball
0.6322m/s=V2
The final velocity of the basketball after the impact is 1.643 m/s west.
The given parameters;
mass of the volleyball, m = 0.34 kginitial velocity of the volleyball, u₁ = 1.98 m/smass of the stationary basketball, m₂ = 0.6 kgfinal velocity of the volleyball, v₁ = 0.79 m/sThe final velocity of the basketball after the impact is calculated by applying the principle of conservation of linear momentum;
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
0.34(-1.98) + 0.6(0) = 0.79(0.34) + 0.6(v₂)
-0.673 = 0.316 + 0.6v₂
-0.989 = 0.6v₂
[tex]v_2 = \frac{- 0.989}{0.6} \\\\v_2 = -1.643 \ m/s\\\\v_2 = 1.643 \ m/s \ west[/tex]
Thus, the final velocity of the basketball after the impact is 1.643 m/s west.
Learn more here:https://brainly.com/question/24424291
Evidence of a chemical change includes
A) change in size.
B) change in color.
C) change in shape.
Eliminate
D) change in weight.
Evidence of a chemical change includes
change in color
A kettle of water is heated on a stove. What will happen to the molecules of the water in the kettle as the kettle continues to be heated by the flame?
Answer:
The molecules will take the heat energy and convert it to mechanical energy and they get "excited" and eventually their bonds will break and they will turn into water vapor.
The time period of a wave T is the the time taken to produce one complete wave. If the frequency of a wave is 2 Hz, what is it’s time period?
Answer:
0.5s
Explanation:
if the frequency is 2Hz that means it makes 2 complet cycles in one second. The time period for one cycle would be 0.5s
Determine the vector sum of the displacements Δd1 = 2.4 m [32° S of W]; Δd2 = 1.6 m [S]; and Δd3 = 4.9 m [27° S of E].
Answer:
3.44 metres
Explanation:
To determine the vector sum of the displacements Δd1 = 2.4 m [32° S of W]; Δd2 = 1.6 m [S]; and Δd3 = 4.9 m [27° S of E], resolve the given parameters into x - component and y - component.
Resolving into x - component
- 2.4cos32 + 4.9cos27 = 2.3306
Resolving into y - component
- 2.4sin32 - 4.9sin27 - 1.6 = - 2.553
The vector sum of the displacement will be
Sqrt( 2.3^2 + 2.6^2) =
Sqrt ( 11.81)
3.44 m
Therefore, the vector sum of the displacements is 3.44 metres
Use the picture to answer the question. Name at least three physical properties of the bowling ball.
Answer:
Density, Color, and Luster.
Explanation:
Density, describes how compact the matter is in a substance. A bowling ball is more dense than a beach ball. Color - Describes how light reflects off a substance. Luster - Describes how shiny a substance is.
Answer:
The physical properties is hardness shape and color, I choose hardness because I have grabbed bowling balls before and they are very hard well there could be different types of bowling balls made of different things but I have never seen one or toughed a bowling ball that is not hard. Another physical property I chose for the bowling ball was shape, The reason I chose shape was because the bowling ball is circle, the actual name for a 3-D circle is sphere. The last physical property for a bowling ball is color because mostly all bowling balls have color for example the one in the picture it is red with a little bit of pink, there is many different bowling balls that have different color different hardness but NOT different shape. That is the physical properties of a bowling ball.
Explanation:
:)
a car is driving at 57 mi/hr, how long will it take for the car to go 80 mile
Answer:
1 hour 6 minutes and about 6 seconds
3. The value of frictional force on block in the given
diagram is (Take g = 10 m/s2)
5N
m = 3 kg
8.
u = 0.3
(1) 4N
(2) 5 N
(3) 6 N.
(4) 9 N
what's the meaning of phisikos
A word-forming element meaning "physical, physically; natural," from Latinized form of Greek physikos "natural, physical, pertaining to nature."
In the lab, you looked at speed-time graphs to determine the acceleration of the cart for each of the three fan
speeds.
What was the acceleration of the cart with Low fan speed?
cm/s2
What was the acceleration of the cart with Medium fan speed? cm/s2
What was the acceleration of the cart with High fan speed?
cm/s2
Answer:
(I). The acceleration of the cart with low fan speed is 18 cm/s²
(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²
(III). The acceleration of the cart with high fan speed is 32 cm/s²
Explanation:
Given that,
You looked at speed-time graphs to determine the acceleration of the cart for each of the three fan speeds in the lab.
According to graph,
A , B and shows the high, medium and low fan speeds respectively.
We know that,
The speed-time graph shows the acceleration.
Acceleration is equal to the rate of change of velocity.
(I). We need to calculate the acceleration of the cart with low fan speed
Using formula of acceleration
[tex]a_{l}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{l}=\dfrac{125-0}{7}[/tex]
[tex]a_{l}=18\ cm/s^2[/tex]
(II). We need to calculate the acceleration of the cart with medium fan speed
Using formula of acceleration
[tex]a_{m}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{m}=\dfrac{140-0}{6}[/tex]
[tex]a_{m}=23.3\ cm/s^2[/tex]
(III). We need to calculate the acceleration of the cart with high fan speed
Using formula of acceleration
[tex]a_{h}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{h}=\dfrac{160-0}{5}[/tex]
[tex]a_{h}=32\ cm/s^2[/tex]
Hence, (I). The acceleration of the cart with low fan speed is 18 cm/s²
(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²
(III). The acceleration of the cart with high fan speed is 32 cm/s²
Answer:
18.0, 24.0, 32.0
Explanation:
just did it
Which is a limitation of using cellulose?
its lack of mass production
its lack of biodegradability
3
its harm to landfills
O its high cost to recycle
Answer:
Its lack of mass production
Explanation:
Your Welcome;)
The limitation of using cellulose is its lack of mass production.
Cellulose is a polymer of glucose. It is obtained from glucose by condensation polymerization to yield a long chain.
Cellulose materials have a high potential of being quite useful as important materials for diverse applications.
However, the problem with cellulose materials is that they can not really be mass produced. This limitation has long encumbered the possibility of using cellulose materials for various applications in material science.
Learn more: https://brainly.com/question/961761
if a object falls from 5 meters how long did it take for it to reach the ground explain(gravity= -10)
Explanation:
[tex]time \: period = \sqrt{ \frac{2h}{g} } = \sqrt{ \frac{10}{10} } = 1sec[/tex]
which sI units are combined to describe force?
Answer:
Symbol N
Explanation:
The SI unit of force is the newton, symbol N
The units of mass, length, and time are.
The combination is the unit of force, called the "Newton".
1 Newton is the force that accelerates 1 kilogram of mass at the rate of 1 meter per second every second.