Answer:
3.8 x 10²⁴molecules
Explanation:
Given parameters:
Number of moles = 6.32moles
Unknown:
Number of molecules = ?
Solution:
The number of moles can be used to derive the number of molecules found within a substance.
Now,
1 mole of substance contains 6.02 x 10²³ molecules
6.32 mole of PBr₃ will contain 6.32 x 6.02 x 10²³ = 3.8 x 10²⁴molecules
The chemical formula for the ionic compound aluminum sulfite is Al2(SO3)3. Explain why there are 2 cations for every 3 anions in this compound.
my mom !!!Explanation:
Musscle man
1. The heat absorbed when ice melts can
be measured in a unit called a
(1) torr
(2) degree
(3) mole
(4) joule
Answer:
joule
Explanation:
What patterns do you observe in the data?
Explanation:
What type of graph is most appropriate to present the data in Table 4? Create a graph of the data in Excel or another graphing software and submit it to your instructor.
Develop a detailed hypothesis for your experiment.What would your experimental approach be to test this hypothesis? Be detailed in your description of the experiment.
6.What are the independent, dependent, and controlled variables in your experiment?
What type of graph would be appropriate for this data set? Why?
Maggie is sitting at a table wit Fred and Florence.Maggie has 10 markers but Fred and Florence each have only 7 markers.how can they share markers so each has 8
Answer:
Give them each one so all of you is 8
Explanation:
I hope it helps:)
Fred and Florence have a combined total of 14 markers. Meaning, the amount of markers between all three is 24. If Maggie gives one marker to Fred and one marker to Florence, then each of them will have 8 markers.
A sample of gas occupies a volume of 598.9 mL and has a pressure of 675.6 torr. What will the pressure of the sample of gas be if the volume is decreased to 235 mL? Be sure to include units with your answer.
Answer:
1721.77 torrExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
From the question we have
[tex]P_2 = \frac{598.9 \times 675.6}{235} = \frac{404616.84}{235} \\ = 1721.773787...[/tex]
We have the final answer as
1721.77 torrHope this helps you
A gas is allowed to expand from a volume of 400 ml to 2000 ml at a constant temperature. If the the initial pressure is 3 atm, calculate the final pressure exerted by the gas
Answer:
[tex] P_{2}) = 0.6 \; atm [/tex]
Explanation:
Given the following data;
Initial volume = 400 mL
Final volume = 2000 mL
Initial pressure = 3 atm
To find the final pressure P2, we would use Boyles' law.
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
[tex] PV = K[/tex]
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Substituting into the equation, we have;
[tex] 3 * 400 = P_{2}* 2000[/tex]
[tex] 1200 = 2000P_{2}[/tex]
[tex] P_{2}) = \frac {1200}{2000}[/tex]
[tex] P_{2}) = 0.6 \; atm [/tex]
What do you think caused this land formation ?
The illustration below shows the human skeletal system. Use the illustration to any questions at follow
Skull
Facial Cranium
bones
Clavice
Scapula
Humerus
Vertebral
column
Sternum
Una
Ribs
Radius
Sacrum
Carpals
Metacarpals
Phalanges
Tarsels
-Femur
-Patella
-Tibia
Fibia
Metatarsels
Phalanges
Using the illustration, which function do the bones of the skull mainly perfom?
A. They allow movement
B. They produce proteins
C. They protect tissues and organs
D. They connect muscles to tissues
im pretty sure its C, if im right please give me brainlist
The function where the bones of the skull mainly perfom should be that they protected the tissue and organs.
What is tissue and organs?Here the tissue and organs should be considered as the basic structural units with respect to the bodies.
Here the tissues should be comprise of the cell collections that have the same kind of function while on the other hand, the organ should be the tissue collections.
Therefore, it protected the tissue and organs.
learn more about tissue here: https://brainly.com/question/19031918
the density of seawater is ____ fresh water?
Answer:
Since salt ions are heavier than water molecules, seawater is denser than freshwater. The density of seawater ranges from 1020 to 1030 kg/m 3 while the density of freshwater is about 1000 kg/m 3. Variations in salinity also cause the freezing point of seawater to be somewhat lower than that of freshwater.
Explanation:
The movement of electrons is what type of energy?
Answer:
Electrical energy
Explanation: Kinetic energy is motion, it is the motion of waves, electrons, atoms, molecules, substances, and objects. Electrical energy is the movement of electrons.
Answer: Electrical Energy
Explanation: The movement of electrons is Electrical Energy, because Educere says so :)
What part of the atom tells you what element it is?
Number of electrons
Number of Photons (the light particle)
Number of Neutrons
Number of Protons
Answer: I believe it is the number of protons.
why does no one love me? when will i feel appreciated?
Answer:
I appreciate you- owo... and people do love you. uwu. even tho I am a stranger I love you :D. ❤
You're the best person anyone could ever ask for. Trust me you're enough <3
A 50 gram sample of radioisotope undergoes 2 half lives. How many grams would remain at the end?
Answer:
you would need to multiply 50 times 2 wich is 100 so i beleive its 100
Explanation:
All of the alkaline earth metals are similar in that – they are all artificially made elements they all have similar atomic weights. they all have the same ionic charge. they all show variable valences.
Answer:
they all have the same ionic charge.
Explanation:
Alkaline earth metals are group 2 metals on the periodic table. They are divalent elements because they have two valence electrons and ionize by donating these two valence electrons. Elements in this group have the same numbers of electrons in their outermost shell of their atoms. i.e. they all have the same number of valence electrons and ionic charge.
The chemical formula for zinc sulfate
Answer:
ZnSO4
Explanation:
There
Which of the following are soluble in water? Select all that apply.
K2SO4
CaCl2
LiOH
I think it is
K2SO4?
Answer:
1 And 2 are soluble in water
23) The function of an organelle is related to its
A. system.
B. structure.
C. blood cell.
D. job.
Help plzzz
Answer:
Well, it could be B or D but I would say B.
Explanation:
The structure of an organelle is usually fit to its function so it is most likely B.
Hope this helps!
Which one has more Thermal Energy? A cup of boiling water or a bathtub of warm water? Explain! Please answer if you can, thank you!! P.S this is science but i just put it as chemistry?
Answer:
See explanation
Explanation:
The thermal energy of a substance is affected both by its mass and by its temperature. Thermal energy is defined as the total kinetic energy of all particles in an object.
Even though the cup of water has a higher temperature, the bathtub has more thermal energy because it contains much more mass of water compared to the cup. It will release more thermal energy to the surroundings compared to the cup of boiling water.
The bathtub of warm water has a higher total thermal energy due to its bigger volume, but the cup of boiling water has a higher average kinetic energy per particle.
The thermal energy of a cup of boiling water is greater than that of a warm bathtub. The sum of all the kinetic energies of the particles in a substance is its thermal energy. The temperature of boiling water is higher than that of warm bathwater. The average kinetic energy of the particles is measured by temperature. The average kinetic energy of the particles in a cup of boiling water would be higher than that of the warm water in a bathtub, which is normally between 38 and 45 degrees Celsius (100 and 113 degrees Fahrenheit), because water has a boiling temperature of 100 degrees Celsius (212 degrees Fahrenheit).
To know more about thermal energy, here:
https://brainly.com/question/3022807
#SPJ6
A glass of fresh milk with 4% fat is an example of *
4 points
a heterogeneous mixture.
an element.
a homogeneous mixture.
a compound.
Answer:
heterogeneous
Explanation:
composition is not uniform through out
_Se2 → _Se3
A.2,2
B.1,2
C.3,2
D.2,3
Answer:
C. 3,2
Explanation:
these coefficients balance out the equation.
if you drop soap on the floor is the soap dirty or is the floor clean?
Answer:
hahahaha the soappp is dirty and the floor gets clean
The law of unbalanced forces is also known as? :
Answer:
Newton's 2nd Law
Explanation:
Newton's Second Law of Motion is concerned with the effect that unbalanced forces have on motion.
Law of unbalanced forces is also know as Newton's 2nd Law
(02.03 LC)
What term is used to describe the lowest energy level of a particle? (5 points)
Explanation:
Answer and Explanation: Photon is the basic unit of light. The excited state refers to the state when any specified electron gained some energy from surrounding. In the ground state, the electron carries no energy and this refers to its lowest energy level.
If an element has 11 protons and 11 neutrons in its nucleus it must be ?
Answer:
the answer is 11
Explanation:
Ok, let us understand what is an atomic number, an atomic number is simply the proton number, the atomic number is always seen at the bottom left corner in a element of a periodic table, it is the number of proton in a atom of a certain element.
Which element has a mass number of 32?
a. argon ion
b. silicon ion
C. silicon
d. sulfur
Elements that readily lose electrons tend to have
A) high ionization energy and high electronegativity
B) high ionization energy and low electronegativity
C) low ionization energy and low electronegativity
D) low ionization energy and high electronegativity
Answer:
C) low ionization energy and low electronegativity
Explanation:
You’ve been waiting for the bus and your hands become cold. When you get onto the bus and sit down, you put your hands under your legs to warm up. After a while your hands feel warmer but your legs feel colder. Explain this with regards to what you know about thermal energy transfer.
Explanation:
The First Law of Thermodynamics states that energy cannot be created or destroyed in an isolated system. In other words, energy can be converted from one form into another, but it cannot be created nor destroyed.
Conduction is the transfer of energy from one molecule to another by direct contact. This transfer occurs when molecules hit against each other, which can take place in solids, liquids, and gases.
When you put your cold hands under your legs to warm your hands up, the heat energy from your legs is being transferred to your hands through conduction. However, since energy cannot be created, there is no extra heat energy that can instantaneously replace the heat created by your legs.
Every metabolic process involves energy transfer. Since as the total energy is conserved and thus no loss or gain of energy will be there in a system and to maintain this equilibrium energy transfer from lower energy spot to higher energy spot.
What is thermal energy?Thermal energy is the energy in the form of heat and which can transfer from one part to the other as any other energy form.
As energy is conserved in a system there will be no net gain or loss of energy overall. Thus energy lost from one part travels to the other parts. Any energy forms transfer from a low intense area to high intense area.
When our hand cools down we may warm them up by rubbing on legs. Where heat energy is transferred from our legs to hands to warm it up. Thus here temperature is given to a colder part from a hot part.
This is an example of heat transfer hence, our legs cools down because some of its temperature is lost to hands still the overall temperature of the body remains balanced.
To find more about heat transfer, refer the link below:
https://brainly.com/question/13433948
#SPJ5
What is it called when a rock is broken down into smaller pieces by ice, glacier or water ? Chemical weathering, physical weathering, deposition, pollution
Answer:
deposition I hope this helps!!
Explanation:
Answer:physical weathering
Explanation:
How can you increase the momentum of an object?
(a) by decreasing its velocity
(b) by increasing its friction
(c) by increasing its mass
(d) by decreasing its acceleration
Answer:
(c) by increasing it's mass
Answer:
(C) by increasing its mass
Explanation: Mass and velocity are both directly proportional to the momentum. If you increase either mass or velocity, the momentum of the object increases proportionally. If you double the mass or velocity you double the momentum.
The atoms in SBro6 are most likely being held together by what type of bond?
A. O metallic bonds
B.
ionic bonds
c. O polar covalent bonds
D
covalent bonds
Answer:
b
Explanation:im not really sure sorry if its wrong