The molarity of the sodium hydroxide, NaOH solution, given that 18.66 mL was used is 0.107 M
How do I determine the molarity of NaOH?We'll begin by obtaining the mole of NaOH. This can be obatined as follow:
Mass of KHp = 0.4 gMolar mass of KHP = 204.22 g/molMole of KNO₃ = 0.4 / 204.22 = 0.002 moleKHP + NaOH -> KNaP + H₂O
From the balanced equation above,
1 mole of KHP reacted with 1 mole NaOH.
Therefore,
0.002 mole of KHP will also react with 0.002 mole of NaOH.
Finally, we shall determine the molarity of the NaOH solution. Details below:
Mole of NaOH = 0.002 moleVolume = 18.66 mL = 18.66 / 1000 = 0.01866 LMolarity of NaOH = ?Molarity = mole / volume
Molarity of NaOH = 0.002 / 0.01866
Molarity of NaOH = 0.107 M
Learn more about molarity:
https://brainly.com/question/13386686
#SPJ1
Helpppp I have no clue what to put here in the blanks
Hope You got this.......
3. From a stock solution of Dye A, a series of four dilutions were made. The concentration and absorbance
data are given below, beginning with a calibrated blank of distilled water. Plot a Beer-Lambert law graph of absorbance versus concentration.
Concentration
Absorbance
0.000 (blank)
4
0.00 M
1.00 x 10-5 M
0.270
2.00 x 10-5 M
0.550
3.00 x 10-5 M
0.810
4.00 x 10-5 M
1.100
Thus mass of dye A = 10.24 mg/L
Plot Beer-Lambert law
Beer-Lambert law states that absorbance of an analye (here, dye A) is directly proportional to its concentration (C) and pathlength (l) of the solution
i.e. A \propto C*l
or A = \epsilonCl
where \epsilon = proportionality constant and is called absorptivity coefficient. It is characteristic for an analyte at a given wavelength, unit = M-1cm-1
Thus above equation can be compared with a straight line equation as y = mx+c
where y = absorbance, x = concentration and \epsilon = slope, c = intercept = 0 for absorbance vs concentration plot.
b. Calculate the slope (m) of graph:
for absorbance vs concentration plot.
The given data was plotted and fitted to a liner fit that gave the equation as:
y = 27335 x
slope of the line = 27335
thus \epsilon = 27335 M-1cm-1
c. Concnetration using Beer-Lambert plot:
Absorbance of dye A in Sports drink, A = 0.700
point absorbance of 0.007 on y-axis and interpolate to the linear fit. Check the corresponding value at x-axis as follows:
the corresponding line meets x-axis at 0.00002 + 4-squares
In the graph drawn, 7 squares in x-axis = 0.00001
thus 4 squares on x-axis = 0.00001*4/7 = 5.71*10-6
thus for y = 0.700 the corresponding x-axis reads = 0.00002+5.71*10-6
or C = 2.57*10-5 M
d. Concnetration of dye A using slope of fitted line:
Absorbance of dye A in Sports drink, A = 0.700
substituting the absorbance in the linear fit equation we can calulate the concentration as:
0.700 = 27335*C
C = 0.700/27335
C = 2.56*10-5 M
e. Mass of dye A in mg/L
Molar mass of dye = 400 g/mol
Concentration (molarity) of dye A = 2.56*10-5 M
1 M = number of moles of solute present in 1 L of solution volume
number of moles = mass / molar mass
\therefore Molarity = mass of solute/(molar mass of solute*volume of solution)
for solution volume = 1L
Molarity = mass of solute/molar mass of solute
rearranging this we get:
mass of solute = (Molarity*molar mass of solute) g/L
mass of dye A = 2.56*10-5* 400 g/L
m = 0.01024 g/L
1 g = 1000 mg
Thus mass of dye A = 10.24 mg/L
To learn more about Molar mass visit:https://brainly.com/question/12127540
#SPJ1
a 0.897g sample containing chloride ion is treated with excess lead (ii) nitrate. the lead (ii) chloride precipitated is filtered into a filter paper that weighed 0.923g. after washing and drying the precipitate filter paper weighed 2.686g. calculate the following:
The reaction between a sample containing chloride ions with excess Lead (II) nitrate leads to the formation of [tex]PbCl_2[/tex] in the form of precipitate.
a) The precipitate formed in the reaction of excess Lead (II) nitrate and chloride ions is [tex]PbCl_2[/tex].
Total ionic is [tex]2Cl^- + Pb(NO_3)_2 \rightarrow PbCl_2 (ppt) + 2NO_3^-[/tex]
Net ionic is [tex]2Cl^- + Pb^+ \rightarrow PbCl_2 (ppt)[/tex]
b) Excess Lead (II) nitrate was used in the reaction to precipitate each and every chloride ion.
c) The total mass of [tex]PbCl_2[/tex] = 2.686 - 0.923 = 1.763g
Molar mass of [tex]PbCl_2[/tex] = 278g/mol
Therefore, moles of [tex]PbCl_2[/tex] = 1.763/278 = 6.342 x [tex]10^{-3}[/tex]
d) No. of moles of chloride = 2 x moles of [tex]PbCl_2[/tex] = 12.684 x [tex]10^{-3}[/tex]
Mass of chloride = 35.5 x 12.684 x [tex]10^{-3}[/tex]
Mass of chloride = 0.45g
e) % of chloride = 0.45/0.897 x 100 = 50.2%.
f) No, the mass of the sample is not same as the mass of the precipitate formed during the reaction.
The complete question is:
A 0.897g sample containing chloride ion is treated with excess lead (II) nitrate. The lead (II) chloride precipitated is filtered into a filter paper that weighed 0.923g. After washing and drying the precipitate+ filter paper weighed 2.686g. Calculate the following:
a) Write the total ionic and net ionic equation for the reaction producing the precipitate:
total ionic:
net ionic:
b) Why was excess lead (II) nitrate used in the above procedure?
c) moles of lead (II) chloride formed:_______
d) Moles of chloride present in the sample__________ and Mass of chloride present in the sample _________
e) % of chloride in the sample: ___________
f) Is the mass of the sample same as the mass of precipitate? _________
Learn more about Lead (II) nitrate reactions here:
https://brainly.com/question/26980915
#SPJ4
a balloon originally had a volume of 4.39 l at 44 °c and a pressure of 729 torr. the balloon must be cooled to °c to reduce its volume to 3.62 l (at constant pressure).
The final temperature must be 273 K or 0 °C to reduce the volume to 3.62 L.
Let's solve the problem by using Charles Law which states that at constant temperature and pressure, the quotient of the volume and the temperature will always have the same value.
Now , mathematically, we can write as
[tex]\frac{V}{T}[/tex] = K
For initial and final states, the above equation can be written as
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
Since, we are given
V1 = 4.39 L
T1 = 44 °C = 317 K (being O°C = 273 K)
V2 = 3.78 L
T2 = ?
Substituting the abovementioned values in Charles's law we get:
[tex]\frac{4.39L}{317K}[/tex] = [tex]\frac{3.78L}{T2}[/tex]
Now solving the above equation.
[tex]T_{2}[/tex] x [tex]\frac{4.39L}{317k}[/tex] = 3.78L
[tex]T_{2}[/tex] = 3.78L ÷ [tex]\frac{4.39L}{317K}[/tex]
[tex]T_{2}[/tex] = 273K i.e. 0°C
Hence, the final temperature must be 273 K or 0 °C to reduce the volume to 3.62 L.
If you need to learn more about temperature click here:
https://brainly.com/question/26141817
#SPJ4
Why was it important to have endothermic and exothermic processes in the building materials of your train?
It is important to have endothermic and exothermic processes in building materials of your train because, this is to absorb and release heat to make the train run faster.
Wood burning heaters and steam engines release heat energy in an exothermic reaction. A train that used to be powered by a steam engine. Therefore, since heat is used, the heat balance is important. A steam engine absorbs energy during the boiling phase of water.
This is an endothermic reaction. If steam is used to actuate the piston, its energy must be released by actuating the train. Excess energy is released into the chimney as flue gas. This is an exothermic process as it releases energy into its surroundings.
Exothermic reactions are important in forensics, especially in fire and explosion investigations. Conversely, if a chemical reaction requires heat (instead of producing heat) and results in cooling of the surrounding environment, it is said to be endothermic.
Learn more about Exothermic and endothermic reactions here:
https://brainly.com/question/2532798
For these equations, different acids have been used so you will need to think carefully about how to balance them.
1 In a titration, 20 cm3 of 1.0 mol dm-3 sulphuric acid, H2SO4, reacted with 25 cm3 of NaOH. What was the concentration of the sodium hydroxide?
2 In a titration, 20 cm3 of 1.0 mol dm-3 nitric acid, HNO3, reacted with 25 cm3 of NaOH. What was the concentration of the sodium hydroxide?
3 In a titration, 20 cm3 of 1.0 mol dm-3 phosphoric acid, H3PO4, reacted with 25 cm3 of NaOH. What was the concentration of the sodium hydroxide?
4 In a titration, 25.0 cm3 of 0.5 mol dm-3 sulphuric acid, H2SO4, reacted with 25 cm3 of KOH. What was the concentration of the potassium hydroxide?
The concentration of the given solutions based on the titration is given below:
1. concentration of NaOH is 1.6 mol/dm³
2. concentration of NaOH is 0.8 mol/dm³
3. concentration of NaOH is 2.4 mol/dm³
4. concentration of KOH is 1.0 mol/dm³
What is a titration reaction?A titration reaction is a reaction in which a solution of known concentration and volume is reacted with a given volume of a solution of unknown concentration in order to determine the unknown concentration of the second solution.
1. Volume of H₂SO₄ = 20 cm³
The concentration of H₂SO₄= 1.0 mol/dm³
Volume of NaOH reacted = 25 cm³
Mole ratio of NaOH and H₂SO₄ = 2 : 1
The concentration of NaOH = 20 * 1.0 * 2/25
The concentration of NaOH = 1.6 mol/dm³
2. Volume of HNO₃ = 20 cm³
The concentration of HNO₃= 1.0 mol/dm³
Volume of NaOH reacted = 25 cm³
Mole ratio of NaOH and HNO₃ = 1 : 1
The concentration of NaOH = 20 * 1.0 / 25
The concentration of NaOH = 0.8 mol/dm³
3. Volume of H₃PO₄ = 20 cm³
The concentration of H₃PO₄ = 1.0 mol/dm³
Volume of NaOH reacted = 25 cm³
Mole ratio of NaOH and H₃PO₄ = 3 : 1
The concentration of NaOH = 20 * 1.0 * 3 / 25
The concentration of NaOH = 2.4 mol/dm³
4. Volume of H₂SO₄ = 25 cm³
The concentration of H₂SO₄= 0.5 mol/dm³
Volume of KOH reacted = 25 cm³
Mole ratio of KOH and H₂SO₄ = 2 : 1
The concentration of KOH = 25 * 0.5 * 2 / 25
The concentration of KOH = 1.0 mol/dm³
Learn more about titration at: https://brainly.com/question/2496335
#SPJ1
A piece of copper wire contains 5 moles of copper atoms. What’s is its mass ( the molecular mass of copper is 63.5 g/mol)
Answer:
317.5 g
Explanation:
1 mole of Cu = 63.5 g
so the mass of 5 moles of Cu = 63.5 x 5 = 317.5 g
the first arrow in the resonance of the amide is drawn for you. in the second structure, add one curved arrow to show the movement of an electron pair that will result with the positive charge moving to the nitrogen atom. complete the resonance structure by drawing the bond formed by the movement of electrons in the previous step.
When a compound's qualities cannot be fully explained by a single structure, we require more structures. These additional structures are known as resonance structures, and the phenomenon they describe is known as resonance.
Resonance is the term used to describe the phenomena of enhanced amplitude that happens when the frequency of a periodic force is applied (or a Fourier component of it) is equal to or nearly equal to the natural frequency of the system on which it works. In contrast to when the same oscillating force is applied at other, non-resonant frequencies, a dynamic system will oscillate at a higher amplitude when the oscillating force is applied at its resonant frequency.
Resonant frequencies or resonance frequencies of the system are frequencies at which the response amplitude is a relative maximum. Small periodic forces that are close to a resonant frequency of the system can produce large amplitude oscillations in the system due to the storage of vibrational energy.
Learn more about resonance here:
https://brainly.com/question/28318319
#SPJ4
One beaker contains a single compound, another an element, another a heterogeneous mixture, and another a homogeneous mixture. Which beaker's content's are a single compound?
The first beaker will contain a single compound, while another beakers will contains mixture of components.
What is mixture?A mixture is defined as a composition made up of two or more chemical components that do not mix chemically.
It can also be defined as a substance formed by the combination of two or more separate substances that does not result in a chemical reaction.
There are two types of mixture.
Homogenous mixture - It is defined as a combination with the same proportions of its constituents in a given amount of sample. Heterogenous mixture - It is defined as a combination in which the composition varies throughout the solution.Thus, the first beaker will contain a single compound, while another beakers will contains mixture of components.
To learn more about mixture, refer to the link below:
https://brainly.com/question/24898889
#SPJ1
Assuming that a strong acid and a weak acid are both equal concentrations, which would be expected to have the higher standard enthalpy change when neutralized with a strong base?.
The strong acid would exhibit a higher standard enthalpy change when neutralized with a strong base.
The difference between strong and weak acids is the level of dissociation. Strong acids dissociate completely, while weak acids dissociate only partially. That means that during the neutralization of a weak acid, a certain amount of energy needs to be expended on breaking the bond between the proton and the acid anion, lowering the overall enthalpy change in the process. On the other hand, because strong acids dissociate completely, no energy needs to be expended on total dissociation, meaning that the complete enthalpy change is greater.
You can learn more about enthalpy here:
brainly.com/question/13996238
#SPJ4
State the main points of Dalton’s atomic theory. Which parts were found to be erroneous? Explain why they are
The main points of Dalton's atomic theory is Atoms are not indivisible and all atoms of an element are not identical.
What are the Postulates of Dalton's atomic theory?Atoms are the minuscule, indivisible building blocks of all stuff.
A certain element's atoms are all the same mass, size, and other characteristics. Nevertheless, the characteristics and mass of atoms from various elements varies.
Atoms are eternal and cannot be generated or destroyed. Atoms also can not be separated into smaller particles.
Compounds can be created by combining atoms of various elements in specific whole-number ratios.
In chemical reactions, atoms can be joined, separated, or rearranged.
What is the drawbacks of Dalton's atomic theory?The fact that an atom may be further divided into protons, neutrons, and electrons disproves the idea that it is indivisible. The smallest particle that participates in chemical processes is an atom, nevertheless. Dalton asserts that the atoms of the same element are identical in every way.
Learn more about Dalton's atomic theory here :
brainly.com/question/5256778
#SPJ13
A sample of copper has a mass of 50 g and a volume of 5 cm^3. What is its density?.
Apply what you've learned about
separating mixtures to explain why as many
particles as possible are allowed to settle
out before the water is passed through
filters.
Answer:We need to separate different components of a mixture to separate the useful components from the non-useful or some harmful components. Examples: (a) Tea leaves are separated from tea.
The particles are allowed to settle out at the bottom before the water is passed through to separate the particles of the higher density and recovered from the bottom.
What is sedimentation?Sedimentation is the tendency for the particles to settle out of the fluid content. Then they come to rest against a specific barrier due to their own motion which is in the response to all the forces that are acting on them.
Sedimentation can be described as the opposite process of erosion which is the terminal end where the sediment is transported. Sedimentation allows the particles with different densities which are in the suspended form in water to settle under the gravitational force.
The settled particles from the suspension become sediment, while water treatment is called sludge. When this thick sediment continues to settle, which is assisted by mechanical means is called the process of thickening.
Then you can easily remove the sediment by using a filtration system that contains a water sediment filter.
Learn more about sedimentation, here:
https://brainly.com/question/22443465
#SPJ5
please help me with my homework
5. Identify each of the following as element, compound, homogeneous
mixture, or heterogeneous mixture. Explain your reasoning for each.
a. milk
b. iron nail
c. glass
d. sugar
e. bottled spring water
f. distilled water
g. air
h. alloy bicycle frame
i. propane
i.
baking soda
Milk : Homogenous
glass : Homogenous
sugar : compounds
bottled spring water : Homogenous
distilled water : compounds
air : Homogenous
alloy bicycle frame : Homogenous
propane : compounds
baking soda : Homogenous
When two liquids totally mix, they produce a homogenous combination.
Complete dissolution of a solid in a liquid
When there is no phase difference in a combination, it is said to be homogenous. The composition of a homogeneous mixture is constant and consistent across the whole system.
A mixture of water and ethanol, for instance, is an example of a homogeneous mixture since the two substances are miscible in all amounts.
To know more about homogenous refer to https://brainly.com/question/16938448
#SPJ9
3. A stack of recyclable newspaper 36 inches high
will save one tree. The number of trees saved by
recycling is directly proportional to the height of a
stack of recyclable newspapers. How many trees
would be saved from a stack of newspapers 24 feet
high?
8 trees would be saved from a stack of newspapers 24 feet high if The number of trees saved by recycling is directly proportional to the height of a stack of recyclable newspapers.
What is proportional?Equivalence between two ratios is referred to as proportionality in algebra. A and B are in the same proportion as C and D in the expression a/b = c/d.
When one of a proportion's four quantities is unknown, a proportion is typically used to solve a word problem. It is resolved by multiplying one numerator by the opposing denominator and equating the result to that of the other numerator and denominator.
Stack of recyclable newspaper 36 inches high will save one tree;
Let the stack of recyclable newspaper = s = 36
Number of trees = n = 1
We have given that
s α n
Which means
s = kn
where k is constant
k = s/n
= 36/1
= 36 inches
We know that 24 feet = 288 inches, So
n = s/k
n = 288 inches/36 inches
n = 8 trees
Learn more about proportional
brainly.com/question/8598338
#SPJ9
advanced study assignment (asa) a student reacts a 0.050g sample of magnesium in excess hydrochloric acid in order to produce hydrogen gas collected at room temperature (23.2°c). 48.6 ml hydrogen gas is collected in an eudiometer tube with water initially at 20.0°c. 1. how many moles of magnesium are reacted? moles of magnesium reacted: 2. from the balanced chemical equation, how many moles of hydrogen gas are created? moles of hydrogen gas created: 3. if the pressure inside the eudiometer tube is equalized to atmospheric pressure (1.00 atm), what is the pressure of only the hydrogen gas in the tube (without water vapor)? pressure of hydrogen gas only: 4. considering that this reaction was not performed at stp, calculate the volume of hydrogen gas that would have been produced at stp. (hint: use equation 1) volume of hydrogen gas at stp: 5. using the information you calculated, what is the molar volume at stp for hydrogen gas? molar volume of hydrogen gas: 6. given the known molar volume of an ideal gas at stp, calculate the percent error in your experiment. percent error:
Reaction between 0.050g Magnesium and HCl in excess gives the following results.
Magnesium interacts with hydrochloric acid (HCl), and this presentation may be used to show a single replacement reaction, the typical interaction of metals with acid, or the production of hydrogen gas.
A eudiometer is a laboratory tool used to gauge how much a gas mixture expands or contracts after undergoing a physical or chemical change.
Magnesium is a shiny gray solid whereas HCl is a colourless aqueous solution with a pungent odour. On a reaction between these two, single displacement of Cl from HCl to [tex]MgCl_2[/tex] occurs.
Given:
Mass of Mg = 0.050g
Molar mass of Mg = 24g/mol
Calculations:
(a) No. of moles of Mg = 0.050 / 24 = 0.0021 moles of Mg reacted
(b) [tex]Mg (s) + 2HCl (l) \rightarrow MgCl_2 (s) + H_2 (g)[/tex]
As moles of Mg reacted = moles of [tex]H_2[/tex] produced
Therefore, No. of moles of [tex]H_2[/tex] produced = 0.0021 moles
(c) Vapour pressure of water at 20℃ is 17.5 torr = 0.023atm
Pressure of only [tex]H_2[/tex] gas = 1 – 0.023 = 0.977atm
(d) Using P1V1/T1 = P2V2/T2,
0.977 x 48.6 / 293 = 1 x V2 / 273
Volume of [tex]H_2[/tex] gas at STP = 44.24mL
(e) Molar volume of [tex]H_2[/tex] gas at STP = 44.24 / 0.0021 = 21.067L/mol
(f) Percent error = 22.4 – 21.067 / 22.4 x 100 = 5.95%
Learn more about Magnesium and HCl reactions here:
https://brainly.com/question/14624069
#SPJ4
which one of edwin hubble’s findings support the big bang theory
Answer:
There are billions of galaxies in the universe, not just one.
The universe formed from a central point.
Most galaxies in the universe are moving away from Earth.
Explanation:
What determines a substance's State??
a. the size of its particles
b. the amount of Substance
c. the speed of its particles and the attraction between them
d.the chemical energy that the Substance has
How can the Swartz process be modified to work for bacteria?
Alkyl chlorides and alkyl bromides are typically transformed into alkyl fluorides in the organic reaction known as the Swarts Reaction.
Swarts' reaction is normally used to get alkyl fluorides from alkyl chlorides or alkyl bromides. that is done with the aid of heating of the alkyl chloride/bromide in the presence of the fluoride of some heavy metals.
The partial fluorination of nonpolar natural polyhalides with antimony trifluoride within the presence of antimony pentachloride or chlorine is normally known as the Swarts response and the combination of antimony trifluoride and chlorine (SbF3 + Cl2) is known as the Swarts reagent.
Swarts reaction converts Alkyl chlorides or alkyl bromides Alkyl fluorides. Reacts may be primary halides, secondary halides, alkyl halides and benzyl halides, however does not occur for tertiary reactions, vinyl and aryl halides.
Learn more about Swarts Reaction here:- https://brainly.com/question/24436360
#SPJ1
Question 19 of 29
Question 1-19
Submit Test
U-Scier
Which of the following characteristics does not depend on the amount of the sample?
O Mass
O Density
O Heat content
O Volume
Heat content is the characteristics that does not depend on the amount of the sample known as Intensive Property.
What is Intensive Property?One wholly independent of a substance's or system's mass is said to possess an intensive property. Intensive properties include things like pressure (P) and heat content (T).
Intensive properties of matter are those that are independent of the size or quantity of the substance in any way. Heat content, color, melting and boiling points, and other characteristics are all intensive properties because they do not change as a function of size or quantity of matter.
Being an intensive property, the density of one litre of water or one hundred litres of water will remain constant.
Learn more about heat content
https://brainly.com/question/27991746
#SPJ9
a bicycle pump contains 0.650 L of helium at 101 kpa. if the pump is closed, what pressure is required to change the volume to 0.250 L?
please i need an immediate answer
If a bicycle pump contains 0.650 L of helium at 101 kpa. if the pump is closed, then the pressure is required to change the volume to 0.250 L is 262.6 kpa.
This can be calculated by using the boyle's law.
What is boyle's law?Boyle's law states that at constant temperature the pressure is directly proportional to the volume of the gas.
P1V1 = P2V2
Given,
P1 = 101 kpa
V1 = 0.650 L
V2 = 0.250 L
By substituting all the values, we get
101 × 0.650 = P2 × 0.250
P2 = 262.6 kpa
Thus, we concluded that If a bicycle pump contains 0.650 L of helium at 101 kpa. if the pump is closed, then the pressure is required to change the volume to 0.250 L is 262.6 kpa.
learn more about boyle's law:
https://brainly.com/question/1437490
#SPJ10
All side lengths of ΔJKL equal 2 units. A transformation maps ΔJKL to ΔJ'K'L'. The length of side J'K' is 5 units. Is this a rigid transformation?
No, there is no one-to-one mapping of all the points of the pre-image to the image.
No, at least one segment length is not preserved, making this a nonrigid transformation.
Yes, the vertices of the pre-image map to the vertices of the image.
Yes, all of the side lengths of the pre-image are proportionate to the image.
The correct answer is No, at least one segment length is not preserved, making this a nonrigid transformation.
A rigid transformation of the plane, also known as an isometry, keeps length intact.
"Rigid transformations" include reflections, translations, rotations, and combinations of these three transformations.
A rigid transformation implies that neither the shape nor the size is altered.
Because the length of segment JK (2 units) is not preserved when mapped onto J'K', the second answer is correct, which gives the resulting unit 5 units.
To know more about Rigid transformations, click on the link.
https://brainly.com/question/1761538
#SPJ1
Answer: B
Explanation: No, at least one segment length is not preserved, making this a nonrigid transformation
an ester can be produced by: a. reacting acid anhydride with carboxylic acid b. reacting aldehyde with carboxylic acid c. reacting alcohol with carboxylic acid d. reacting aldehyde with carboxylic acid
c) ester can be produced by reacting alcohol with carboxylic acid
What is esterification ?
The general term for a chemical reaction in which two reactants (usually an alcohol and an acid) combine to create an ester as the end product is "esterification." Esters are frequently found in organic chemistry and biological materials, and they frequently have a distinctive, fruity scent.
The process of making ester typically involves combining a carboxylic acid with an excess of an alcohol while using a tiny amount of a strong acid, like conc.H2SO4, as a catalyst. The esterification reaction is reversible, and the equilibrium constant for the reaction is often close to 1. Numerous strategies are employed to raise the ester yield because the reaction is reversible.
c) ester can be produced by reacting alcohol with carboxylic acid
To know about esterification from the link
https://brainly.com/question/14028062
#SPJ4
a student analyzes his reaction mixture by tlc. after developing the tlc plate in ethyl acetate, he observes a single spot, with an rf of 0.95. does this indicate that his reaction mixture contains only one compound? what can be done to verify the purity of the sample by tlc? select all answers that apply.
The single spot, with an Rf value of 0.95. observed by the student indicates that his reaction mixture contains only one compound.
The purity of the sample can be verified by checking the single spot using a UV-light.
What is Rf in TLC?Thin-layer chromatography is a form of chromatography in which a thin layer serves as the solid support over which the differet components in the dye are separated.
The Rf value or the retention factor (Rf) is a value used to compare and help identify compounds in a mixture of compounds or dyes separated by thin-layer chromatography.
Mathematically, the Fr value of a compound is calculated as follows:
Rf value = distance traveled by the compound / distance traveled by the solvent front.
A single Rf value indicates a single compound was present.
Learn more about Rf values at: https://brainly.com/question/17751879
#SPJ1
What is the atomic number of the atom shown?
Answer: 13 same as proton number
Answer:
the atomic number is 13(proton number) while the mass number is 14
draw a three-dimensional orbital representation for each of the following molecules, indicate whether each bond in it is a σ or π bond, and provide the hybridization for each non-hydrogen atom
a) CH2O
The carbon atoms are present in sp2 hybridization
b) CH2=CH-CH=CH2
All carbon atoms are present in sp2 hybridization
c) CH2=C=C=CH2
The 2,3-carbons are in sp hybridization and the remaining carbons are in sp2 hybridization.
The idea of combining two atomic orbitals to create a new class of hybridized orbitals is known as hybridization in chemistry. This mixing typically produces hybrid orbitals with completely distinct energies, geometries, etc. Hybridization primarily involves atomic orbitals at the same energy level. However, if an orbital has equivalent energy, it can participate in this process, as can an orbital that is partially filled.
On the other side, we may claim that the idea of hybridization is an expansion of the valence bond theory and that it aids in our understanding of how bonds are formed, how they are energetically, and how long they are.
When two atomic orbitals in a molecule combine to generate a hybrid orbital, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name of this procedure.
Learn more about Hybridization here:
https://brainly.com/question/14140731
#SPJ4
an unknown compound contains only c , h , and o . combustion of 3.50 g of this compound produced 6.99 g co2 and 2.86 g h2o . what is the empirical formula of the unknown compound? insert subscripts as needed.
The empirical formula of the unknown compound is C2H4O
Number of moles = mass / molar mass
------
molar mass of CO2 = 44 g/ mole
Moles of CO2 =6.99/44 = 0.152 moles
Since there is 1 mole of C in CO2
so, no. of moles of C = 0.152moles
mass of C = 0.152x 12 = 1.824 g
-------
molar mass of H2O = 18 g/ mole
moles of H2O =2.86/18 = 0.158moles
Since there are 2 moles of H in H2O
so, no. of moles of H = 0.158x2 = 0.317 moles
mass of H = 0.317x1.0079 = 0.3202g
--------
Total mass of H and C = 0.3202+1.824 = 2.144g
mass of sample = 3.50 g
mass of O = 3.50 - 2.144= 1.356 g
moles of O=1.356/16= 0.08475 moles
molar ratio of C : H : O =1.824 : 0.3202 : 0.08475
smallest number = 0.0847
Divide number of moles of C,H and O by the smallest number:
Molar ratio of C : H : O = 21.53 : 3.9 : 1.0
= 2:4:1
Hence the Empirical formula is C2H4O
To learn more about Empirical formula -
https://brainly.com/question/1603500
#SPJ4
If 1.85 grams of Mg(OH)2 reacts with 3.71 grams of HCl how much MgCl2 is produced?what is the limiting reactant? 1Mg(OH)2+2HCl=1MgCl2+2H2O
Answer
Mg(OH)2 is the limiting reactant
Mass of MgCl2 produced = 3.02 g
Explanation
Given: The balanced chemical equation
mass of Mg(OH)2 = 1.85 g
mass of HCl = 3.71
Solution
Mg(OH)2
[tex]1.85g\text{ Mg\lparen OH\rparen}_2\text{ x }\frac{1\text{ mol Mg\lparen OH\rparen}_2}{58,3197g}\text{ x }\frac{1\text{ MgCl}_2}{1\text{ Mg\lparen OH\rparen}_2}\text{ = 0.031 mol MgCl}_2[/tex]HCl
[tex]3.71g\text{ HCl x }\frac{1\text{ mol HCl}}{36,458g}\text{ x }\frac{1\text{ MgCl}_2}{2\text{ HCl}}\text{ = 0.051 mol MgCl}_2[/tex]Therefore Mg(OH)2 is the limiting reactant.
Calculation of MgCl2 mass
[tex]0.031\text{ mol MgCl}_2\text{ x }\frac{95,211g}{1\text{ mol MgCl}_2}\text{ = 3.02 g}[/tex]please help me on this
Answer:
Option A
Explanation:
Because B, C, D, or E are impossible, protons cannot change, electron = protons.
4) A car is speeding along with
5,000 N of force. It
experiences 400 N of friction
and then hits a zombie, which
exerts 500 N of force back
against the car. What is the net force and is it balanced?
The net force of the car speeding with of 5000N of force is 4100N force and it is not even near to be balanced.
What is net force?The net force is the total of all the forces acting on an object, according to its definition. Mass can be accelerated by net force. Whether a body is at rest or in motion, another force is at work on it. When a system has a lot of forces acting on it, the phrase "net force" is used.
We have given,
Applied force Fa = 5000N
Frictional force Ff = -400N
Force exerted back by zombie Fz = -500N
The net force formula is given by
[tex]F_{Net}[/tex] = F₁ + F₂ + F₃
[tex]F_{Net}[/tex] = 5000 - 400 - 500
[tex]F_{Net}[/tex] = 4100N
Therefore, The net force of the car speeding with of 5000N of force is 4100N force and it is not even near to be balanced.
Learn more about net force
https://brainly.com/question/14709298
#SPJ9