Answer
To solve this excescise we use the ideal gas equation:
[tex]P.V=n.R.T[/tex]Where:
P is the pressure of the gas
V is the volume
T is the temperature
R is the ideal gas constant
n is the number of moles
As the balloon is a closed recipient n is the same in state 1 (T: 24°C) and state 2 (T: 48°C).
R is a constant so also remains the same.
The pressure is also a constant in this case as the only thing that we do to the balloon is heat it.
So therefore:
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}=\frac{n.R}{P}[/tex]Now we calculate the volume at 48°C (V2):
[tex]V_2=\frac{V_{1.}T_2}{T_1}=\frac{1.2L.48\degree C{}}{24\degree C}=2.4L[/tex]As we can see as the temperature rises the volume of the gas increases because the molecules have more kinetic energt and they remain farther apart.
The answer then is the new volume of the balloon is 2.4L
The Ka of a monoprotic weak acid is 0.00469. What is the percent ionization of a 0.141 M solution of this acid?
Use quadratic equation.
The percent ionization of an acidic solution can be calculated from the H+ concentration. the percent ionization of the monoprotic acid of 0.141 M is 18.23 %.
What is percent ionization?Percent ionization of an acidic solution is the percent of H+ ions in the solution. Thus, mathematically, it is the ratio of H+ ion concentration to the concentration of solution multiplied by 100.
Let HA be the monoprotic acid when it ionizes, forming equal concentration of H+ and A- let it be x. Thus ionization constant can be written as follows:
Ka = [x]² /[HA]
0.00469 =[x]²/[0.141 M]
[X] = 0.025. = [H+]
Percentage ionization = (0.025 M / 0.141 M)× 100
= 18.23 %
Therefore percentage ionization of the acid is 18.23%.
To find more about percentage ionization, refer the link below:
https://brainly.com/question/11064341
#SPJ1
Question 1 (3 points)
Listed in the Item Bank are some important labels for sections of the image below.
Select the label for each corresponding area it identifies in
-noble gas
-alkaline earth metals
-transition metals
-alkali metals
-nonmetal
-metalloids
-halogens
The first column represent the alkali metal, the second column represent alkaline earth metals, the 3rd horizontal middle block is d block, the right 6 columns of the periodic table represent p block and the rightest column is noble gas.
What is noble gas, transition metals and it's places?See figuring out the right place of the elements mentioned in the periodic table is easy because its a predicted and factual thing.The first column we see in the periodic table is alkali metals.The second column we see in the periodic table is alkaline earth metals.The middle horizontal slit of elements called as d block elements starting from scandium.The right six columns belongs to p block elements and the rightest column represents noble gas elements.To know more about metals visit:
https://brainly.com/question/28650063
#SPJ13
I cant figure this one out. How do I know ΔH∘ for the preceding reaction without knowing the standard enthalpie of F2?
The enthalpy of formation (ΔH°) of the given chemical reaction is equal to -905.3 KJ/mol.
What is the standard enthalpy of formation?The standard enthalpy of formation is defined as the change in enthalpy when one mole of a substance is formed from its pure elements under the standard state (1 atm of pressure and 298.15 K).
The standard enthalpy of formation is the energy released or absorbed when one mole of a substance is formed from its constituents under standard conditions. The symbol of the standard enthalpy of formation is represented by [tex]\triangle {H^o_f}[/tex].
The equation for the standard enthalpy change of formation for a balanced chemical reaction is shown below,
ΔH° (reaction) = ∑ [ΔH° of (products)− ∑ ΔH° of (Reactants)]
The standard enthalpy of the formation of fluorine gas = 0
The standard enthalpy of the formation of iodine gas = 62.23 KJ/mol
The standard enthalpy of the formation of IF₅ = -843 KJ/mol
ΔH° (reaction) = - 843 - 62.23 = - 905 .3 KJ/mol
Therefore, the enthalpy of formation (ΔH°) of the given chemical reaction is -905.3 KJ/mol.
Learn more about enthalpy of formation, here:
https://brainly.com/question/28302300
#SPJ1
6. In order to prepare 50.0 mL of 0.100 M NaCl you will add _____ grams of NaCl to _____ mL of wate
The first step to solve this problem is to find the number of moles of NaCl in 50.0mL of 0.100M NaCl. To do it, convert the volume of solution to liters and multiply it by the concentration of the solution (M=mol/L).
[tex]50mL\cdot\frac{1L}{1000mL}\cdot\frac{0.100mol}{L}=0.005mol[/tex]Now, use the molar mass of NaCl to find the mass of 0.005moles of it (MM=58.44g/mol):
[tex]0.005mol\cdot\frac{58.44g}{mol}=0.2922g[/tex]It means that you have to add 0.2922g to 50mL of water.
what is combustion? explain to me pls
Answer:
rapid chemical combination of a substance with oxygen, involving the production of heat and light.
Explanation:
Combustion is a chemical process in which a substance reacts rapidly with oxygen and gives off heat. The original substance is called the fuel, and the source of oxygen is called the oxidizer.
if you want to learn more:
https://www.britannica.com/science/combustion
https://youtu.be/xd1alir07q4
Consider the following processes: 1. A ─→ B delta H = ─100 kJ 2. B ─→ C + D delta H = ─50 kJ 3. E ─→ D delta H = ─25 kJ What is the delta H for the process: A ─→ C + E?
The enthalpy change, ΔH of the process: A → C + E is -125 kJ.
What is the enthalpy change of a reaction?The enthalpy change of a reaction is the sum of the heat changes that occur as reactants combine to form products.
The enthalpy change of the reaction is given by the following formula:
Enthalpy change = sum of energy of bonds broken - sum of energy of the bonds formedΔH = ∑H(bonds broken) - ∑H(bonds formed)The delta H for the process A → C + E is given as follows;
1. A ─→ B ΔH = ─100 kJ
2. B ─→ C + D ΔH = ─50 kJ
3. E ─→ D delta H = ─25 kJ
-3. D → E = +25 kJ
A → C + D = 1 + 2 + (- 3)
A → C + E = (- 100 - 50 + 25) kJ
A → C + E = -125 kJ
Learn more about enthalpy change at: https://brainly.com/question/14047927
#SPJ1
How much work (in J ) is involved in a chemical reaction if the volume decreases from 4.25 to 1.97 L against a constant pressure of 0.838 atm ?
The amount of work (in J ) is involved in a chemical reaction if the volume decreases from 4.25 to 1.97 L against a constant pressure of 0.838 atm is: 8.78 Joules.
What is work done?The work done by an object can be calculated by multiplying the force acting on it by the perpendicular distance covered by the physical object. Also, the work done during a chemical reaction can be determined by multiplying the change in volume by the accompanying level of pressure.
Mathematically, the work done by a system is given by the formula:
Work done = PΔV = P(V₂ - V₁)
Where:
P represents the pressure.V represents the volume.Substituting the given parameters into the formula, we have;
Work done = 0.038(4.25 - 1.97)
Work done = 0.038(2.28)
Work done = 0.08664 L.atm
Next, we would convert L.atm to Joules:
Work done = 101.325 × 0.08664
Work done = 8.78 Joules.
Read more on work done here: https://brainly.com/question/25086088
#SPJ1
Please help me it’s due today!!!!
The following are the examples of a chemical property of a substance;
1) A banana reacts with orange and turns brown
2) Iron will rust when exposed to oxygen and water
3) Iron will react with acid to form iron chloride.
What is a chemical reaction?The term chemical reaction has to do with the change in the properties of substances that are combined together in order to yield a product. Recall that the properties of the reactant change as the product is formed.
When a chemical reaction occurs
1: A new color may appear
2) A new gas may be seen
3) The temperature may be changed
Learn more about chemical reaction:https://brainly.com/question/3461108
#SPJ1
A liquid in the lab has a density of 1.24 g/cm³ . What is the mass in grams of 254 mL of the liquid? I dont know where to start when to convert because of the Activ app. I need help on how to answer this.
The mass in grams of the 254 mL of the liquid, given that it has a density of 1.24 g/cm³ is 314.96 grams
How to determine the mass of the liquidWe'll begin by listing the out the parameters obtained from the question. This is given below:
Density of liquid = 1.24 g/cm³Volume of liquid = 254 mL = 254 cm³Mass of liquid =?The mass of the liquid can be obtained as follow:
Density = mass / volume
Cross multiply
Mass = Density × Volume
Mass of liquid = 1.24 × 254
Mass of liquid = 314.96 grams
Thus, the mass of the liquid is 314.96 grams
Learn more about mass and density:
https://brainly.com/question/13799762
#SPJ1
The cost of electricity to deposit 10gm of Mg is Rs. 60. How much would it cost to deposit 100gm of copper from CuSO
, ? (At. wt. of Cu = 63.5)
The cost of electricity to deposit 100g of copper from CuSO₄ will be Rs227.1
We know, m = zit
1unit current= 1kwh
Energy=Vit
m= (E. weight/F)×it
m proportional to (E. weight)×cost
m₁/m₂ = E₁/E₂ × C₁/C₂
E.weight = (Molecular weight/n-factor)
According to question,
Cu² + 2e- --- Cu
Mg² + 2e- --- Mg { n-factor of both=2}
E₁ = (molecular weight of Mg/2) = (24÷2) = 12
E₂ = (molecular weight of Cu/2) = (63.5) = 31.7
So, M₁/M₂ = E₁×C₁/E₂×C₂ (C₁=cost given)
10/100 = 12×60/31.7×C₂
C₂= Rs227.1
Therefore the cost of electricity to deposit 100g of copper from CuSO₄ will be Rs227.1
Learn more about cost of electricity to deposit copper/aluminium here
https://brainly.com/question/19204222
#SPJ9
The reaction of carbon with oxygen to produce carbon monoxide is an example of which type (or class) of reaction?2C(s) + O2(g) → 2CO(g)single replacementendothermicdouble replacementcatalyticcombination
Combination. Option E is correct.
Explanations:Given the chemical reaction between carbon and oxygen expressed as:
[tex]2C(s)+O_2(g)\rightarrow2CO(g)[/tex]From the equation, you can see that carbn combines with oxygen atom to produce carbonmonoxide. This type of reaction is known as the combination reaction since it involves the reaction of two elements to produce a compound (carbon monoxide)
Based on the explanations above, we can concude that the reaction of carbon with oxygen to produce carbon monoxide is an example of a combination reaction.
Imagine the movement of gas particles in a closed container. According to the kinetic molecular theory, which statements below are true of the gas particles? Check all that apply.
Based on the kinetic molecular theory, the statements that are true of the gas particles are as follows:
Gas particles act like tiny, solid spheres; option A.Gas particles are in constant, random motion; option BCollisions are elastic, there is no energy lost as the particle hits the sides of the container; option C.What is the kinetic molecular theory?The Kinetic Molecular Theory is the theory that molecules of a gas are in constant random motion colliding with one another and with the wall of their container.
These collisions between the gas molecules are perfectly elastic and are responsible for the pressure of gas molecules.
The higher the kinetic energy of the gas molecules, the higher the temperature of the gas.
The kinetic molecular theory explains the physical state of gases since gas molecules have negligible intermolecular forces.
Learn more about kinetic molecular theory at: https://brainly.com/question/9783576
#SPJ1
Complete question:
Imagine the movement of gas particles in a closed container. According to the kinetic molecular theory, which statements below are true of the gas particles? Check all that apply. Gas particles act like tiny, solid spheres. Gas particles are in constant, random motion. Gas particles at lower temperatures move faster. Collisions are elastic, there is no energy lost as the particle hits the sides of the container. Slower moving particles collide more often and with more force with the container.
The volume of a gas is 480 mL at 45.0 oC the temperature is increased to 60.0 oC at a constant pressure what is the new volume
Answer
The new volume = 0.503 L or 503 mL
Explanation
Given:
Initial volume, V₁ = 480 mL = (480/1000) = 0.480 L
Initial temperature, T₁ = 45.0°C = (45 + 273 K) = 318 K
Final temperature, T₂ = 60.0°C = (60 + 273 K) = 333 K
What to find:
The new volume, V₂ when the temperature increases to 60.0°C.
Step-by-step solution:
Since the pressure is constant, the new volume, V₂ can be calculated using Charle's law formula.
[tex]\begin{gathered} \frac{V_1}{T_1}=\frac{V_2}{T_2} \\ \\ \Rightarrow V_2=\frac{V_1T_2}{T_1} \end{gathered}[/tex]Plugging the values of the given parameters into the formula, we have
[tex]V_2=\frac{0.480L\times333K}{318K}=0.503\text{ }L[/tex]The new volume, V₂ when the temperature increased to 60.0°C = 0.503 L or (0.503 x 1000 mL) = 503 mL
Silver Sulfate reacts with Potassium Chloride according to the following reaction:Ag2SO4 + 2KCl -> 2AgC1 + K2SO4a. If 30.0 grams of Ag2SO4 reacts with 10.0 grams of KCl, what mass of AgCl is produced by the reaction b. the limiting reactant is ______c. how many grams ok K2SO4 can be produced.d. how many grams of excess reactant remain after the reaction e. what is the percent yield if there is 10.0g of AgCl
Answer:
Explanations:
Given the chemical reaction
[tex]Ag_2SO_4+2KCl\rightarrow2AgCl+K_2SO_4[/tex]Given the following
Mass of Ag2SO4 = 30grams
Mass of KCl = 10grams
Determine the moles of the reactants
[tex]\begin{gathered} mole\text{ of Ag}_2SO_4=\frac{mass}{molar\text{ mass}}molar\text{ mass} \\ mole\text{ of Ag}_2SO_4=\frac{30g}{311.799} \\ mole\text{ of Ag}_2SO_4=0.0962moles \end{gathered}[/tex][tex]\begin{gathered} mole\text{ of KCl}=\frac{10g}{74.5513} \\ moleof\text{ KCl}=0.1341moles \\ 1mole\text{ of KCl}=\frac{0.1341}{2}=0.06707moles \end{gathered}[/tex]B) B) Since the 1 moles of KCl is lower than the moles of Ag2SO4, hence KCl willl be the limiting reactant.
A) A) According to stoichiometry, 2 moles of KCl produces 2 moles of AgCl, the mass of AgCl produced will be given as;
[tex]\begin{gathered} mass=mole\times molar\text{ mass} \\ mass\text{ of AgCl}=0.1341\times143.32 \\ mass\text{ of AgCl}=19.22grams \end{gathered}[/tex]C) According to stoichiometry, 2 moles of KCl produces 1 moles of K2SO4, the mole of K2SO4 produced is;
[tex]\begin{gathered} mole\text{ of }K_2SO_4=\frac{1}{2}\times0.1341 \\ mole\text{ of }K_2SO_4=0.06707moles \end{gathered}[/tex][tex]\begin{gathered} mass\text{ of K}_2SO_4=mole\times molar\text{ mass} \\ mass\text{ of K}_2SO_4=0.06707\times174.259 \\ mass\text{ of K}_2SO_4=11.69grams \end{gathered}[/tex]At STP, exactly 1 mole of any gas occupies 22.4 L. What size container (in Liters) do you need to hold 2.1mol O₂ gas at STP?(Show all work)A) 44.2B) 47.0C) 40.0D) 55.5
Answer
B) 47.0
Explanation
If at STP, exactly 1 mole of any gas occupies 22.4 L
Then, 2.1 moles of O₂ gas at STP will occupy x L container
To get x L, cross multiply and divide both sides by 1 mole.
[tex]x\text{ }L\text{ }container=\frac{2.1\text{ }mol}{1\text{ }mol}\times22.4\text{ }L=47.0\text{ }L[/tex]Therefore, the size of the container (in Liters) needed to hold 2.1 mol O₂ gas at STP is 47.0 L
yes or no ? experimentation with corn and other crops led to the development of new fuels called biofuels
Yes, the experimentation with corn and other crops led to the development of new fuels called biofuels.
What are biofuels?Biofuel is a biodegradable, inexhaustible, fuel that is produced from Biomass. Biofuel is considered the easiest available and pure fuel on the earth. Biofuels are manufactured from biomass such as wood and straw, which are liberated by direct combustion of dry matter and converted into a gaseous and liquid fuel.
The organic matter such as sludge, sewage, and vegetable oils, can be changed into biofuels by a wet process such as fermentation and digestion. Biofuel is available in all regions of the world, and mainly includes fuels such as Biodiesel, Bioethanol, and Bio methanol.
The two types of biofuels are bioethanol and biodiesel most commonly used these days. Both of these biofuels are the first generation of biofuel technology.
Learn more about biofuels, here:
https://brainly.com/question/502679
#SPJ1
30.Which of the following procedures increases the amount of oxygen that is dissolved in a certain amount of water?Select one:a. Increasing the air pressure on the solution.b. Shaking the solution.c. Stirring the solution.d. Warming the solution.
Answer
a. Increasing the air pressure on the solution.
Explanation
Scientists can use chemicals to clean toxins from the soil. What does this
show about chemicals?
Any substance made of matter is by definition a chemical, which includes solids, liquids, and gases. Pure substances or mixtures of substances can both be found in chemicals. Water (H2O), for example, is a pure chemical because the same molecules and molecular combinations are present throughout its whole structure.
Explain about the chemicals ?Any material with a known composition is a chemical. Some chemicals, like water, are found in nature, meaning they always consist of the same "stuff." Other chemicals, including chlorine, are produced (used for bleaching fabrics or in swimming pools).
A chemical compound is a material that contains a specific combination of atoms or ions. Chemical compounds are made up of two or more elements coming together through a chemical process. While all substances are compounds, not all substances are compounds.
On its list of substances covered by the Toxic Substances Control Act, the EPA has more than 85,000 chemicals listed.
Not all chemicals are detrimental to the economy.
To learn more about Chemicals refer to:
https://brainly.com/question/26487468
#SPJ13
The atomic radius of a boron atom is 9 times 10-11m. Give its atomic radius in nanometres?
The atomic radius of boron atom is 0.09nm
What is an atomic radius?
Atomic radius, also known as atomic radii, is the total distance between an atom's nucleus and its electron's outermost orbital.
Atomic radius is thus defined as: The distance from the nucleus's center to the edge of its surrounding electron shells.
The radius of an atom is comparable to a circle's radius. The electron's most distant orbital is likened to the circle's outside edge, and the nucleus to the circle's center. The position of the outermost electron is unclear, making it challenging to calculate the atomic radii.
According to the question,
1m = 10-9nm
So, 9*10-11m = 0.09nm
The atomic radius of boron atom is 0.09nm
To learn more about Atomic radius from the given link
https://brainly.com/question/15255548
#SPJ10
What do you call a way of acquiring knowledge through experiment?
a.Academic method C.Scientific method
b.Experimental method d.Scientific notation
Answer:B
Explanation:
5. During factory inspection, Just Lemons, Inc. discovered that a water valve to the
lemonade mixing station was not functioning. Once they repair it, more water will
enter the mixing station. From what you know about the limiting and excess
ingredients for current lemonade production, what advice would you give engineers
about the upcoming increase in water?
The advise which would be given to the engineers is for them to determine the limiting reactant so water will not be in excess.
What is a Limiting reagent?This is referred to as the reactant which is completely used up in a chemical reaction and it helps to determine when the reaction stops. In this scenario, either water, lemon juice or sugar is a limiting reactant.
The best option in this scenario is to tell the engineers to determine the limiting reactant so as to ensure that the quality of lemonade made is maximized and is therefore the right choice.
Read more about Limiting reagent here https://brainly.com/question/26905271
#SPJ1
For the reaction A (g) → 3 B (g), Kp = 67900 at 298 K. When ∆G = -14.2 kJ/mol, what is the partial pressure of A when the partial pressure of B is 2.00 atm for this reaction at 298 K.
The partial pressure is the individual pressure of a gas. The partial pressure of gas A is 1.11 × 10⁻⁴atm.
What is partial pressure?
In a mixture of gases, the partial pressure of a gas is the individual pressure of that gas in the mixture of gases.
Given the reaction; A (g) → 3 B (g)
Kp = P(B)³/PA
Where Kp = 67900
PB = 2.00 atm
67900 = (2)³/PA
PA = (2)³/67900
PA = 1.11 × 10⁻⁴atm
Learn more about partial pressure:
brainly.com/question/13199169?
#SPJ1
When a bright light is shined on glow in the dark powder what is happening to the electrons.
a.The electrons are absorbing some of the light and are become excited.
b.The atoms become negatively charged ions.
c.Nothing, the electrons are not affected by light.
d.The electrons move to a lower energy state.
1. What is the difference between a homogenous and a heterogeneous mixture? 2. Give 3 examples of each mixture and explain its uses in our daily lives.
Answer:By combining two or more substances, a mixture is produced. A homogeneous solution tends to be identical, no matter how you sample it. Homogeneous mixtures are sources of water, saline solution, some alloys, and bitumen. Sand, oil and water, and chicken noodle soup are examples of heterogeneous mixtures.
Explanation:
PLEASE HELP ASAP, I will mark the "brainiest"
In the generic reaction: 5A + 2B --> 6C + 3D The molar mass of A is 146.70g/mol while the molar mass of C is 21.31g/mol. If 4.253 g of A reacts with an excess of B, how many grams of C can form? Remember significant figures and units.
The amount, in grams, of C that can form from the reaction, is 0.7414 g.
Stoichiometric problemFrom the equation of the reaction, the mole ratio of A to that of C is 5:6.
In other words, for every 5 moles of A that reacts, 6 moles of C is produced.
Molar mass of A = 146.70 g/mol
Molar mass of C = 21.31 g/mol
Recall that: mole = mass/molar mass
Mole of 4.253 g of A = 4.253/146.70
= 0.029 mol
From the mole ratio, the equivalent mol of C that will be produced is:
0.029 x 6/5 = 0.03479 mol
mass = mole x molar mass
Mass of 0.03479 mol of C = 0.03479 x 21.31
= 0.7414 g (to the appropriate sig. fig.)
In other words, the amount of C that will be produced from 4.253 g of A will be 0.7414 g.
More on stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1
How many molecules are in 59.73 grams of the theoretical acid borofuric acid, H2B2O2?
remember units and sig figs.
If your answer is a very large number, use scientific notation with an 'E' in this format:
120,000,000 = 1.2E8
The number of molecules in 59.73 grams of the theoretical acid, borofuric acid, would be 6.44 x [tex]10^2^3[/tex] molecules.
Avogadro's numberAccording to Avogadro, 1 mole of any substance contains 6.022 x [tex]10^2^3[/tex] molecules.
Recall that: number of moles in a substance = mass of the substance/molar mass of the substance.
Molar mass of borofuric acid, [tex]H_2B_2O_2[/tex]:
H = 1 g/mol
B = 10.8 g/mol
O = 16 g/mol
(1x2) + (10.8x2) + (16x2) = 55.6 g/mol
Number of moles of 59.73 grams [tex]H_2B_2O_2[/tex] = 59.73/55.6
= 1.07 moles
Since 1 mole = 6.022 x [tex]10^2^3[/tex] molecules
1.07 moles of borofuric acid = 1.07 x 6.022 x [tex]10^2^3[/tex] molecules.
= 6.44 x [tex]10^2^3[/tex] molecules
Thus, 59.73 grams of borofuric acid contains 6.44 x [tex]10^2^3[/tex] molecules.
More on Avogadro's number can be found here: https://brainly.com/question/11907018
#SPJ1
4 Fe(s) + 3 O2(g) → 2 Fe2O3(s) How many grams of oxygen gas, O2(g), are needed to react completely with 17.86 grams of iron?
• According to the balanced equation, we have :
4 Fe(s) + 3 O2(g) → 2 Fe2O3(s)
4 x 55.85g of Fe reacts with 3 x 32g of Oxygen
Given 17.86 g of Ion, we want to find out how much oxygen will be required in this instance .
• So :
M.mass Fe: 4* 55.85 = 223.4
M.mass O2 : 3* 32 = 96
we can rearrange by :
223.4 → 96
17.86 → x .....(cross multiply )
223.4x = 96* 17.86
x = (96 *17.86) / 234.4
x = 7.314
• Therefore mass of oxygen required = 7.3g ,
What is the pH of a 0.83 M solution of sodium fluoride?
Report your answer to 2 decimal places.
The pH of a solution that is 0.67 M in sodium fluoride and 0.43 M in hydrofluoric acid is 8.53
What is the pH of a solution?The pH of a solution is the negative logarithm of the hydrogen ion concentration of the solution.
Mathematically:
pH = - log [H⁺]The pH of the given solution is calculated as follows:
Ka of HF = 7.2 * 10⁻⁴
Also, Kw = Ka * Kb
Kw = 1.0 * 10⁻¹⁴
Kb = 1.0 * 10⁻¹⁴ / 7.2 * 10⁻⁴
Kb = 1.39 x 10⁻¹¹
The [OH¯] is calculated using the Kb expression:
Kb = [OH⁻] * [H⁺] / [HA}
[OH⁻] = [H⁺] = x
Kb = x² / (0.83 - x)
Assuming x is negligible, the denominator = 0.83
x = √(1.39 x 10⁻¹¹ * 0.83)
x = 3.39 * 10⁻⁶
pOH = -log (3.39 * 10⁻⁶)
pOH = 5.47
pH = 14 - 5.47
pH = 8.53
Learn more about pH at: brainly.com/question/172153
#SPJ1
Explain how the following reaction demonstrates that matter is neither created or destroyed in a chemical reaction: Ca(OH)2 + 2HCI-> CaCl2 + 2H20
Answer:
In this reaction, Ca(OH)2 is a reducing agent. It reacts with hydrogen chloride to form calcium chloride and water. Therefore, the following reaction shows that matter is neither created nor destroyed in a chemical reaction: Ca(OH)2 + 2HCI -> CaCl2 + 2H20. The formation of calcium chloride and water from the hydrolysis of calcium hydroxide is not an example of matter being created or destroyed in a chemical reaction because it does not involve the breaking down of any bonds between atoms.
Explanation:
Can someone help me with this? I’m not understanding what it’s asking of me
Answer: You need to research what ever you are working on and find 2 examples.
Explanation: