Answers
The height at which the half time is provide as the equation in a. Here, the time t is not half of the total time of flight. Thus, the correct equation is option D.
What is horizontal flight?When an object flies to a height t, with a speed and its height depends on the time of travel. There is linear relation with the time of fly and height upto a point in the horizontal flight and after that, the height reduces with time.
Here, height at the exact middle of the plot that is at the half of the time the equation corresponding to the height is
h = 1/2 gt²
But the time given here is not the half of total time and the time can be taken as T-t. Therefore, the equation corresponding to the height of the ball is
1/2 g t (T- t).
To find more on horizontal flight, refer here:
https://brainly.com/question/21728060
#SPJ1
Related Questions
A helium balloon ride lifts up passengers in a basket. Assume the density of air is 1.28 kg/m3 and the density of helium in the balloon is 0.18 kg/m3. The radius of the balloon (when filled) is R = 4.8 m. The total mass of the empty balloon and basket is mb = 129 kg and the total volume is Vb = 0.066 m3. Assume the average person that gets into the balloon has a mass mp = 70 kg and volume Vp = 0.079 m3.
1. What is the volume of helium in the balloon when fully inflated?
2. What is the magnitude of the force of gravity on the entire system (but with no people)? Include the mass of the balloon, basket, and helium.
3. What is the magnitude of the buoyant force on the entire system (but with no people)? Include the volume of the balloon, basket, and helium.
4. What is the magnitude of the force of gravity on each person?
5. What is the magnitude of the buoyant force on each person?
6. How many FULL people can the balloon lift up? (Your answer must be an integer.)
Please include the process!!!!!
Answers
The density of air is 1.28 kg/m^3 and the density of helium in the balloon is 0.18 kg/m^3.
The radius of the balloon (when filled) is R = 4.8 m.
The total mass of the empty balloon and basket is MB = 129 kg
Total volume is Vb = 0.066 m^3
The average person that gets into the balloon has a mass of mp = 70 kg and volume Vp = 0.079 m3.
1 ) The volume of helium in the balloon when fully inflated,
= 4/3 π R^3
= 4/3 x 3.14 x (4.8)^3
= 463.24 m^3 = 463 m^3.
2 ) Force of gravity on the entire system but with no people;
= (mass of the empty balloon and basket + mass of helium )x g
=( 129kg + 463.24 m^3 x 0.18kg/m^3 )x 9.8
= 2081.35 N = 2081 N.
3.) Magnitude of the buoyant force on the entire system (but with no people )
( Volume of empty balloon + basket + volume of helium ) density of air x g
( 0.066 m^3 + 463.24 m^3 ) x 1.28 x 9.8
= 5811.71 N = 5812 N.
4 ) Magnitude of the force of gravity on each person=
Mass of each person(mp) × g
= 70 x 9.8
= 686 N.
Learn more about The magnitude here:- https://brainly.com/question/24468862
#SPJ4
An increasing number of products, such as passports and credit cards, contain an embedded radio-frequency identification chip that both stores and transmits information. The chips do not have their own power sources. Instead, they receive their power through induction from the device used to read the stored information. The reading device generates a magnetic field, and the passport or credit card containing a coil is passed through this field.
If a certain chip needs a peak induced emf of 3.0 V to operate and the magnetic field varies with time as B(t)=Bpeaksin(ωt), where Bpeak = 6.0 mT is the maximum magnetic field and ω = 8.52 × 107 s−1,what value must the product AN have in order for the chip to operate, where A is the coil's surface area and N is number of turns in the coil?
Answers
The value must the product AN have in order for the chip to operate, where A is the coil's surface area and N is number of turns in the coil is NA = 5.87 x 10⁻⁶.
Calculation:
B(t) = [tex]B_{peak}[/tex]sin(ωt)B(t) = (0.006) sin(8.52 x 10⁷t)taking derivative relative to "t" on both sidesdB(t) / dt = (51.12 x 10⁴) Cos(8.52 x 10⁷t)Induced EMf is given asE = NBA w3 = (NA) (0.006) (8.52 x 10⁷)NA = 5.87 x 10⁻⁶All
you need is to measure the outer diameter inner diameter and thickness of the coil. Volumes are given in cubic millimeters. To get the length of the coil, we need to divide the result by the cross-sectional area of the coil, which is determined by the width and thickness of the coil.
Learn more about cross-sectional area here:-https://brainly.com/question/21794392
#SPJ4
both permittivity of free space and permeability of free space can be modified by multiplication by a constant to derive the permittivity and permeability of any material other than vacuum.
Answers
The product of the permittivity of free space and the permeability of the free space equals 1 by the square of the speed of light in a vacuum.
Generally, the dielectric constant can be defined as the ratio of the absolute permittivity of a substance to the absolute permittivity of free space.
Absolute permittivity is the measure of permittivity in a vacuum or free space. It measures the resistance encountered when forming an electric field in a vacuum. εo is the smallest possible value of permittivity. Static permittivity is the permittivity of a material when exposed to a static electric field.
Permeability in general is symbolized µ, and is a constant of proportionality that exists between magnetic flux density and magnetic field strength in a given medium.
Learn more about permeability of free space here:- https://brainly.com/question/15282116
#SPJ4
In the early years of the 20th century, a leading model of the structure of the atom was that of the English physicist J. J. Thomson (the discoverer of the electron). In Thomson's model, an atom consisted of a sphere of positively charged material in which were embedded negatively charged electrons, like chocolate chips in a ball of cookie dough. Consider such an atom consisting of one electron with mass m and charge −e, which may be regarded as a point charge, and a uniformly charged sphere of charge +e and radius R.
A) Is equilibrium position of the electron at the center of the nucleus?
B)
In Thomson's model, it was assumed that the positive material provided little or no resistance to the motion of the electron. If the electron is displaced from equilibrium by a distance r less than R, find the net force on the electron.
Express your answer in terms of the variables r⃗ , R, e, and constants π and ϵ0.
C) Calculate the frequency of oscillation.
Express your answer in terms of the variables m, R, e, and constants π and ϵ0.
Answers
The equilibrium position of the electron at the center of the nucleus is R = 3.16 x10⁻¹⁰m.
Thomson discovered the electron and proposed a structural model of the atom. His research also led to the invention of the mass spectrometer. Thomson announced that he discovered that atoms are made up of smaller components.
Calculation:-
K = 2.304 × 20^-²⁸ / 3
f = 1/2π√k/m
4.63 × 10¹⁴ = 1/2× 3.141 √2.304 × 20^-²⁸ / R³ (9.1 × 10-31)
R = 3.16 x10⁻¹⁰m.
This discovery revolutionized the way scientists think about atoms and had a major impact on the field of physics. Thompson called them corpuscles but what he found are now commonly known as electrons. The plum pudding model is defined by an electron surrounded by a volume of positive charge like a negatively charged plum embedded in a positively charged pudding.
Learn more about Thomson's model here:-https://brainly.com/question/24893763
#SPJ4
coherent light from a sodium-vapor lamp is passed through a filter that blocks everything except for light of a single wavelength. it then falls on two slits separated by 0.470 mm . in the resulting interference pattern on a screen 2.24 m away, adjacent bright fringes are separated by 2.86 mm .What is the wavelength of the light that falls on the slits?
Im lost I don't know where to start.
Answers
The wavelength of the light that falls on the slit = 5.692 × 10⁻⁴m
Here we have
Fringe. separation. = 2.90 mm = 0.0029 m
Slit. separation. = 0.420 mm = 0.00042 m
Distance. from slits to. screen. = 2.14 mm = 0.00214 mm
Wavelength. is given by the following relation.
Wave length = Fringe separation × slit separation /Distance from slits to screen
Therefore;
Wave length = 0.0029 m × 0.00042 m/0.00214 mm = 5.692 × 10⁻⁴m
In a broader sense, the term "light" can apply to electromagnetic radiation of any wavelength, whether visible or not. [4] This definition of light includes gamma rays, X-rays, microwaves, and radio waves. The main characteristics of light include intensity, polarization, frequency or wavelength spectrum, and propagation direction. One of nature's basic constants is the speed of light in a vacuum, which is 299 792 458 meters per second (m/s). [6] Visible light, like all forms of electromagnetic radiation, is propagated by massless elementary particles called photons, which serve as a representation of the electromagnetic field's quanta and can be thought of as both waves and particles. Modern physics places a lot of emphasis on the study of light, or optics.
Learn more about light here:
https://brainly.com/question/1555553
#SPJ4
interference occurs with not only light waves but also all frequencies of electromagnetic waves and all other types of waves, such as sound and water waves. suppose that your physics professor sets up two sound speakers in the front of your classroom and uses an electronic oscillator to produce sound waves of a single frequency. when she turns the oscillator on (take this to be its original setting), you and many students hear a loud tone while other students hear nothing. (the speed of sound in air is 340 m/s.)
Answers
The concept of hearing a loud or no sound depends on the path difference between the two waves , that is when the path difference is an integral multiple of wavelength, we tend to hear a loud sound and when the path difference is odd half intergaral multiple of wavelength then the we hear no sound (destructive interference) .
Now, when the frequency is doubled, the wavelength is also doubled and thus there must not be any change in the pattern of no sound and loud sound. Ultimately,
"The students who originally heard a loud tone again hear a loud tone, and the students who originally heard nothing still hear nothing."
Know more about wavelength here:
https://brainly.com/question/13533093
#SPJ4
if an object is at a pole, it blank accelerating.target 1 of 6 we can truly write blank, such that the apparent weight is exactly mg .target 2 of 6 at the blank, the object is moving in a very large circular path as the earth rotates.target 3 of 6 this means that technically blank.target 4 of 6 that is, the weight force toward the center of the circular path must be slightly blank so it can provide a centripetal force.target 5 of 6 thus n
Answers
If an object is at a pole such that the apparent weight is mg and the object is in large circular path as the earth rotates. The following blank spaces are filled up with the words, is, n-mg = may =0, equator, n-mg = may>0, smaller, pole.
If an object is at a pole it [is] accelerating, At pole accelaration of gravity is maximum. effect of centrifugal force is less.
We Cam Such that write truly n-mg = may =0 such that the apparent weight is exactly mg, because normal force is equal to effective or apparent weight.
At a the equator, the object is moving in very large circular path as the earth rotates. Because, the axis of earth is line joining two pole so at equator distance from the axis to surface is largest.
This means that technically n-mg = may>0. Because at equator normal force is greater than mg due to the presence of centepetal force.
That is the weight force towards the center of the circular path must be be slightly smaller, if Com provide a Contepetal force.
as, weight force = mg-centepetal force.
weight force <mg
Thus n<mg at the pole, At pole Centepetal force is zero so, weight force and mg are equal.
To know more about equator here
https://brainly.com/question/25235769
#SPJ4
the pressure of air in your house can stay constant during the day if the temperature rises. let the temperatures be 297 k during the day, and 288 k at night, and volume of the house be 900 m3. Part A Determine the number of moles of air that leave the house during the daytime.
Answers
Number of moles of air that leave the house during the daytime is 1154.017 moles.
The pressures are constant so:
V₁/T₁ = V₂/T₂
Given,
During the night, V₁ = 900 m³, and T1₁= 288K.
During the day, T₂ = 297K, and V₂ =?
V₂ = V₁*T₂/T₁ = 900*297/288 = 928.125 m³
928.125 - 900 = 28.125 m³
Volume of air that leave the house during the daytime = Vₐ
V₂/T₂ = Vₐ/Tₐ
Vₐ = V₂*Tₐ/T₂ = 28.125*273/297 = 25.85 m³
To calculate the number of moles,
22.24 liters per mole, and 1000 liters per m³, so
number of moles = N
N = 25.85*1000/22.4
N = 1154.017 moles.
Therefore, number of moles of air that leave the house during the daytime is 1154.017 moles.
To know more about moles, refer: https://brainly.com/question/26416088
#SPJ4
an apple weighs 1.20 n. when you hang it from the end of a long spring of force constant 1.44 n/m and negligible mass, it bounces up and down in shm. if you stop the bouncing and let the apple swing from side to side through a small angle, the frequency of this simple pendulum is half the bounce frequency. (because the angle is small, the back and forth swings do not cause any appreciable change in the length of the spring.)
Answers
The unstretched length of the spring is 32.67 m.
Spring Constant = k = 1.44 N/m
Weight of the apple = m = 1.2 N
Acceleration due to gravity = g = 9.8 m/s²
Length of unstretched spring = I
Frequency of SHM motion is given by ;
= f = (1/2π) √(k/m)
Frequency of pendulum is given by;
= f' = (1/2π) √(g/l)
In the question, f' =2f, thus,
= (1/2π) √(g/l) = 2 X (1/2π) √(k/m)
= √(g/l) = (1/2) √(k/m)
Squaring on both sides,
= g/l = k/4m
= l = (g X 4m ) / k
= l = ( 9.8 X 1.2 X 4 ) / 1.44
= l = 32.67 m
To know more about Length of Spring:
https://brainly.com/question/14274970
#SPJ4
The complete question:
An apple weighs 1.00 N. When you hang it from the end of a long spring of force constant 1.50 N/m and negligible mass, it bounces up and down in SHM. If you stop the bouncing and let the apple swing from side to side through a small angle, the frequency of this simple pendulum is half the bounce frequency. (Because the angle is small, the back-andforth swings do not cause any appreciable change in the length of the spring.) What is the unstretched length of the spring (with the apple removed)?
About the four terrestrial planets (Earth, Mars, Mercury, and Venus), which of the following statements is NOT correct?A. The orbital periods of the four planets in order from shortest to longest are: Mercury, Venus, Earth, and MarsB. The distances from the Sun for the four planets in order from closet to farthest are: Mercury, Venus, Earth, and MarsC. The four planets all have mantle, core, and stable atmospheric layersD. The four planets in order from smallest to biggest are: Mercury, Mars, Venus, and Earth
Answers
All four planets contain stable atmospheric layers, a mantle, and a core. One of the following is FALSE regarding the four terrestrial planets (Earth, Mars, Mercury, and Venus).
Which of the following traits do the four terrestrial planets share?Terrestrial planets include Mercury, Venus, Earth, and Mars because of their compact, stony surfaces that resemble terra firma on Earth. The four innermost planets in the solar system are the four terrestrial planets.
What are the four features of planets that are terrestrial?The four innermost planets are known to as terrestrial planets and feature a moon or moons, valleys, volcanoes, and craters. They also have a liquid heavy-metal core.
To know more about terrestrial planets visit :-
https://brainly.com/question/7952964
#SPJ4
Two air-filled parallel-plate capacitors with capacitances C1 and C2 are connected in series to a battery that has voltage V; C1 = 3.00 μF and C2 = 6.00 μF. The electric field between the plates of capacitor C2 is E02. While the two capacitors remain connected to the battery, a dielectric with dielectric constant K = 4 is inserted between the plates of capacitor C1, completely filling the space between them. After the dielectric is inserted in C1, the electric field between the plates of capacitor C2 is E2.
A) What is the ratio E2/E02?
B) When the dielectric is inserted into C1, does the electric field in C2 increase, decrease, or remain the same?
C) Repeat the calculation in part A for the two capacitors connected to the battery in parallel. What is the ratio E2/E02?
Answers
The total positive charge stored on the two capacitors is;
4kQ₀/(k + 1)
We are told that the charge on each capacitor is Q₀.
Now, formula for charge stored on a capacitor is;
Q = CV
Where;
Q is charge
C is capacitance
V is voltage
Thus, total charge stored on the two capacitors will be;
Q = Q₁ + Q₂
Since Q₀ is the charge on each capacitor, then;
For Capacitor 1, we have; Q₀ = C₁V
For capacitor 2, we have; Q₀ = C₂V
Thus, let the capacitance C₁ be be half the capacitance C of two capacitors.
Thus;
C₁ = ¹/₂C
Thus;
Q₀ = ¹/₂CV
2Q₀ = CV
Now, a dielectric with dielectric constant k > 1 is inserted between the plates of capacitor C₁. Thus, the two capacitors will now be kC and C.
Thus;
C₂ = (kC × C)/(kC + C)
C will cancel out to give;
C₂ = kC/(k + 1)
Earlier on, we saw that;
Q₀ = C₂V
Thus;
Q₀ = kCV/(k + 1)
Earlier, we saw that 2Q₀ = CV
Thus, charge is;
Q₀ = 2kQ₀/(k + 1)
Since 2 capacitors, then total positive charge stored is;
2 × 2kQ₀/(k + 1) = 4kQ₀/(k + 1)
To learn more about positive charge visit:https://brainly.com/question/2903220
#SPJ4
n 1986, a nuclear power accident in chernobyl, ukraine led to high radiation levels for kilometers surrounding the plant. the high levels of radiation caused elevated mutation rates in the surviving organisms, and evolutionary biologists have been studying vole populations in the chernobyl area ever since. based on your understanding of evolutionary mechanisms, which of the following most likely occurred in the vole populations following the accident?
Answers
Mutation caused genetic drift and decreased fitness and Sequence alteration in the genomic DNA is the fuel driving the course of evolution.
Mutations, or changes in the nucleotide sequence, can result fromerrors during DNA replication, from covalent changes in structure because of reaction with chemical or physical agents in the environment, or from transposition. Most of the sequence alterations are repaired in cells.
Without such mutations, no changes would occur in populations of species to allow them to adapt to changes in the environment. Mutation is the sudden change in the DNA. Mutations arise due to any kind of mutagen or radiation. In this disaster mutations were introduced due to the radiations. So, there will be variations in the organism.
Mutations will not cause changes only in the physiology of an organism. It does not cause genetic drift and decreased fitness. New alleles cannot be fixed by mutations.But mutations can definitely increase the variety of organisms.
Hence, the correct option is d.
To know more about mutations here
https://brainly.com/question/2639398
#SPJ4
An 1250 W toaster and an 803 W microwave oven are connected in parallel to the same 30.0 A, 120 V circuit.
(a) Find the toaster's resistance R (in ohms). Ω
(b) If the microwave fails and is replaced, what maximum power rating (in W) can be used without tripping the 30.0 A circuit breaker? W
Answers
11.52Ω is the toaster's resistance, and 2350W is the maximum power rating.
The toaster and microwave are connected in parallel so that the potential difference is the same for the toaster and microwave.
use the equation of power to solve for resistance of toaster R
[tex]P=\frac{V^{2} }{R}-------------(1) \\\\R=\frac{V^2}{P} =\frac{(120)^2}{1250} \\\\R=11.50 ohms[/tex]
Given That P=1250, V=120 By substituting these values in equation(1) we get R=11.50 Ohms as shown above.
To solve the current through the toaster we use Ohm's law:
V=IR
I=V/R--------(2)
we already find the R-value and the V value is already given now place these values in equation(2), and we get
I=120/11.50
I=10.43A
The current is divided in parallel circuits so that the total current from the divides between the toaster and microwave,
I=I(toaster)+I(microwave)----------------(3)
I(microwave)=I-I(toaster)
=30A-10.43A
=19.59A
The maximum power microwave used is
P(M)=VI---------------(4)
P(M)=V(M)I(M)
P(M)=120x19.59
P(M)=2350W
To know more about Toaster resistance:
https://brainly.com/question/27856106
#SPJ4
A mass hanging from a spring oscillates with a period of 0.25 s. Suppose the mass and spring are swung in a horizontal circle, with the free end of the spring at the pivot.
What rotation frequency, in rpm, will cause the spring's length to stretch by 23%?
Answers
The frequency of rotation of an object revolving around an axis is sometimes referred to as the rotational speed or rate of rotation of the object. Cycles per second (cps), revolutions per minute (rpm), etc. are some examples of its unit (the Greek lowercase letter nu).
What is the rotational frequency formula?
By a factor of 2, angular frequency (measured in radians per second) is bigger than frequency (measured in cycles per second, commonly known as Hz). In this picture, frequency is represented by the symbol rather than f. a sphere that is revolving about an axis. In order to satisfy = v / r, points further from the axis move more quickly.
How can I determine frequency?
Divide the number of times the event happens over the period of time to determine the frequency. Example: Anna divides the time by the quantity of page clicks (236). (one hour, or 60 minutes). She discovers that her clickthrough rate is 3.9 per minute.
To know more about frequency visit;
https://brainly.com/question/5102661
#SPJ4
Two identical thin rods, each of mass m and length L, are joint at right angles to form an L-shaped object. This object is balanced on the top of a sharp edge. If the object is displaced slightly it oscillates. Assume that the magnitude of the acceleration due to gravity is g. Find, the angular frequency of the oscillation of the object.
Answers
The formula for the angular frequency is = 2/T. Radians per second are used to express angular frequency. The frequency, f = 1/T, is the period's inverse. The motion's frequency, f = 1/T = /2, determines how many complete oscillations occur in a given amount of time.
What is the oscillation formula?A basic harmonic oscillator's angular frequency, period T, and frequency f are given by =km, T = 2mk, and f = 12km, where m is the system's mass and k is the force constant.
The angular frequency calculator: what is it?You can use the angular frequency calculator to figure out a system's angular frequency, also known as angular velocity. In the article that follows, we explain how to determine the angular frequency for straightforward Show several angular frequency formulae as well as harmonic and rotatory motion.
To know more about angular frequency visit:-
https://brainly.com/question/29107224
#SPJ4
on apollo missions to the moon, the command module orbited at an altitude of 110 kmkm above the lunar surface. How much time did it take for the command module to complete one orbit?
Answers
It would take approximately 12 minutes command module to complete one orbit.
The time it takes for the command module to complete one orbit depends on the speed at which it is traveling. For the Apollo missions to the moon, the command module typically orbited at speeds of around 5,600 m/s or 20,000 km/h. It is important to note that the speed at which the command module traveled could vary from mission to mission. Factors such as the gravitational pull of the Earth and Moon and the direction of the burn of the engine could have an effect on the time it takes to complete one orbit. This is why it is important to calculate the speed of the command module for each mission to make sure the spacecraft remains in its optimal orbit.
To know more about the command module refer to the link brainly.com/question/23715326
#SPJ4
use the mineral identification chart above to determine the name of the mineral with the following physical properties: light color, non-metallic vitreous luster, hard enough to scratch glass, 2 directions of cleavage at nearly 90o, lacks striations.
Answers
The name of the mineral with the following physical characteristics is the Harder Than, according to the above mineral identification table. Glass. Two directions are not at 90 degrees. black or dark green vitreous luster. 124 and 56 degree cleavage planes are present. Hornblende. Cleavage.
What is the meaning non-metallic?Non-Metallic. Metallic minerals are those that include metal elements in their unprocessed state. Non-metallic minerals are those that don't include any metals. Melting metallic minerals produces a new material. Non-metallic minerals undergo such a process, but no new product is produced. Nonmetals are chemical elements in chemistry that often don't have a lot of metallic characteristics; they can be anything from colorless vapors to glossy solids. Nonmetals' electrons behave differently from those of metals.
What are non-metallic materials and which is non metallic in nature?Hydrogen, carbon, nitrogen, oxygen, phosphorus, sulfur, silicon, boron, tellurium, and selenium are among the non-metallic elements in the periodic table. They also consist of noble gases and halogens (such as fluorine, chlorine, bromine, iodine, and astatine) (helium, neon, argon, krypton, xenon and radon). The least metallic element among F, Cl, Br, and At is fluorine. This is true because metallic character grows down the group and lessens over time.
To know more about Non-metallic visit:
https://brainly.com/question/20602843
#SPJ4
During a high Reynolds number experiment, the total drag force acting on a spherical body of diameter D = 12 cm subjected to airflow at 1 atm and 5°C is measured to be 5.2 N. The pressure drag acting on the body is calculated by integrating the pressure distribution (measured by the use of pressure sensors throughout the surface) to be 4.9 N. Determine the friction drag coefficient of the sphere, and whether the flow is in turbulence.
Answers
The total drag force acting on a sphere with a diameter of 12 cm and exposed to airflow at 1 atm and 5°C is therefore measured to be 5.2 N. Therefore, the friction drag coefficient is 0.0115.
When determining whether a flow pattern is laminar or turbulent while passing through a pipe, Reynolds number, a dimensionless quantity, is used. The relationship between inertial and viscous forces is what determines the Reynolds number. Friction is caused by surface irregularity, according to observations made at the microscopic level. Variety of Friction Friction can be divided into two categories, which are as follows: internal rubbing
Cdf = 0.2*0.3/5.2
Cdf = 0.06/5.2
Cdf = 0.0115
when 5.2/0.3 = 0.2
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
Gravitational force of 72 units
Answers
Explanation:
Objects 1 and 2 attract each other
with a gravitational force of 72.0 units. If the distance separating Objects 1 and 2 is changed to four times the original value (i.e , quadrupled), then the new gravitational force will be units.
as a jet is taking off, it is accelerating down the runway with acceleration , with . you are sitting inside the jet and holding a simple pendulum consisting of a bob of mass attached to a string of length . the pendulum comes to rest in the equilibrium position where the string makes an angle with respect to the vertical. when the bob is in the equilibrium position, which of the following free-body force diagrams on the bob is correct in a reference frame fixed to the accelerating jet.
Answers
A jet plane's acceleration is a critical phase of flight that necessitates intense focus on the part of both pilots.
On the ground, things can get hectic and demand a lot of situational awareness, especially when there is little traffic separation, a runway is wet, visibility is poor, and there are heavy winds. Nevertheless, you start to relax a little and take in the beauty of flying as the engines begin to accelerate and you take off and break through the clouds. We have put up this essay with all you need to know so that you may master the takeoff phase in complete confidence.
You must commit to memory three call-outs for the acceleration and takeoff phases of your flight. You will first check your instruments at 80 knots. When you push the nose of your aircraft upward and rotate in V1, you are too quick to abort the takeoff.
This was merely a succinct justification. In order to help you mentally prepare, we will go over every important stage of a jet plane's acceleration.
To know more about plane's acceleration
brainly.com/question/14267398
#SPJ4
Heat capacity on its own is rarely enough to predict the thermal performance of a material. Another important consideration is conductivity. If each of the following material was made into a frying pan, which would you expect to be heated the most uniformly in a short period of time when placed on the burner? Brass (k = 120 W/mk) Aluminum (k = 247 W/mK) Invar (63Fe-36Ni, k = 10 W/mK) O Copper (k = 398 W/mK)
Answers
Heat capacity on its own is rarely enough to predict the thermal performance of a material. Another important consideration is conductivity. If each material was made into a frying pan, Copper (k=398 W/mK) expect to be heated the most uniformly in a short period of time.
The amount of heat that must be delivered to an object in order to result in a unit change in temperature is referred to as an attribute of matter known as heat capacity or thermal capacity. The SI unit of heat capacity is joules per kelvin (J/K). Heat capacity is a general attribute. The comparable intensity property is the specific heat capacity, which is determined by dividing an object's heat capacity by its mass. By dividing the heat capacity by the substance's molecular weight, the molar heat capacity may be calculated. The volumetric heat capacity measures the heat capacity per volume. Architecture and civil engineering frequently refer to a building's capacity to store heat as having "thermal mass." The variance can be ignored when working with materials under confined pressure and temperature ranges. When measured at a starting point of 25 °C and 1 atm of pressure, one pound of iron, for example, has a heat capacity of roughly 204 J/K. It is adequate for temperatures between 15 °C and 35 °C and for ambient pressures between 0 °C and 10 °C because the real value fluctuates so little in those ranges.
To know more about Heat capacity please refer: https://brainly.com/question/28921175
#SPJ4
the brakes are applied to a car and it abruptly slows down. the kinetic energy changes from 300 000 j to 100 000 j. the heat released during this process is
Answers
The heat released during the process of applying the break of the car is 200000 Joules.
According to the law of conservation of energy, energy can nether be created nor be destroyed, it can only be converted from one form to another.
In the process when the brakes of the car are applied the kinetic energy of the car is changing from 300000 to 100000 Joules.
When the kinetic energy of the body is getting converted into the thermal energy because of the friction the loss of kinetic energy is taking place.
It has to be noted here that the law of conservation of energy is still valid because all the energy that is lost in the form of thermal energy has gone into the environment which is ultimately a bigger system and the energy is still constant for the universe.
So, the amount of energy that is lost is 200000 Joules.
To know more about kinetic energy, visit,
https://brainly.com/question/8101588
#SPJ4
Class 12 Question > In an L-R-C series circuit, the rms voltage a...Save
In an L-R-C series circuit, the rms voltage across the resistor is 30.0 V, across the capacitor it is 90.0 V, and across the inductor it is 50.0 V. Rms voltage of the source is
a) 60.0 V
b) 50.0 V
c) 65.0 V
d) 5.0 V
Answers
Root Mean Square(rms) voltage of the source in the given LRC series circuit is (b) 50V
The root-mean-square (rms) voltage of a sinusoidal source of electromotive force (Vrms) is used to characterize the source. It is the square root of the time average of the voltage squared. The value of Vrms is Vo/Square root of√2, or, equivalently, 0.707 Vo
Given:
rms Voltage across resistor is 30V
rms Voltage across inductor is 50V
rms voltage across capacitor is 90V
hence, rms voltage of the source is 50V
learn more about rms voltage:
https://brainly.com/question/13507291
#SPJ4
On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m^3 , length 84.8 cm and diameter 2.50 cm from a storage room to a machinist. Calculate the weight of the rod, w. The acceleration due to gravity, g = 9.81m/s^2 .
Answers
The weight of the cylindrical iron rod of density 7800 kg/m³ , length 84.8 cm and diameter 2.50 cm is 31.8 N
The relation between mass and density is given by:
m = ρ . V
Where:
m = mass
ρ = density
V = volume
In the given problem.
ρ = 7800 kg/m³
length (l) = 84.8 cm
diameter = 2.5 cm,
radius (r) = 2.5/2 = 1.25 cm
Hence, the volume of the rod is:
V = πr² . l
= 3.14 x 1.25² x 84.8 = 416 cm³
= 416 x 10⁻⁶ m³
Hence, its mass is:
m = 7800 x 416 x 10⁻⁶ = 3.24 kg
And its weight is:
w = m x g
= 3.24 x 9.8 = 31.8 N
Hence, the weight is 31.8 N
Learn more about density here:
https://brainly.com/question/952755
#SPJ4
A car accelerates uniformly from rest and reaches a speed of 21.1 m/s in 9.06 s. If the diameter of the tire is 58.0 cm, find (a) the number of revolutions the tire makes during the motion, assuming that no slipping occurs. (b) What is the final angular speed of a tire in revolutions per second?
Answer: (54.3 rev, 12.1 rev/s) --> please show me how to get this answer!
Answers
A. The number of revolutions the tire makes during the motion, assuming that no slipping occurs is 54.33 revolutions.
B. The final angular speed of a tire in revolutions per second is 12.07 revolutions per second or 4364.58 degrees per second.
Solution:
21.1m/s from rest with constant acceleration means that the average speed was 11m/s.
Therefore, you can get the distance traveled by distance = time * average speed:
distance = 9s * 11m/s = 99m
Now, to get the number of revolutions, you have to divide the total distance by the circumference of the tire. The circumference is equal to pi * diameter:
Circumference = pi(3.14159265) * 0.58m = 1.82m
So:
Revolutions = 99m / 1.82m = 54.33 revolutions.
The angular speed can be worked out using the circumference as well. 22m/s is the final speed, so if you divide that by the circumference, you get the revolutions per second, which is your angular speed:
22m/s / 1.82m = 12.07 revolutions per second.
If they want this in degrees per second, just remember that there are 360 degrees in a revolution, so multiply it by 360:
12.07 * 360 = 4364.58 degrees per second.
Learn more about Angular speed here:- https://brainly.com/question/6860269
#SPJ4
A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.30s for the boat to travel from its highest point to its lowest, a total distance of 0.670m . The fisherman sees that the wave crests are spaced a horizontal distance of 5.50m apart.
How fast are the waves traveling?
Express the speed v in meters per second using three significant figures.
What is the amplitude A of each wave?
Express your answer in meters using three significant figures.
Answers
The waves for the boat of fisherman is travelling with the speed of 1.203 m/s and the amplitude of each wave is 0.35 m.
What is speed of wave?The rate at which a wave travels a certain distance in a given amount of time is referred to as its speed.
The boat travels 0.700 meters from its highest point to its lowest point. The boat requires 2.70 minutes to travel.
The fisherman notices that the wave crests are 6.50 meters apart horizontally. Since the wave's wavelength is determined by the horizontal spacing between crests. Consequently, the wave's wavelength is,
lambda=6.50s
The wave's period is equal to the time it takes to travel from its peak to lowest point. Consequently, the wave's period is,
T=2X2.7
T=5.4s
The relationship between wavelength and time period determines the wave's speed. Consequently, the waves' traveling speed is,
v=6.50/5.4
v=1.203m/s
The wave's amplitude is equal to half of the distance between its peak and lowest points.
The boat now travels 0.700 meters from its highest point to its lowest position. As a result, each wave's amplitude is A=0.7/2.A=0.35m.
As a result, the waves for the fishing boat are moving at a speed of 1.203 m/s and have an amplitude of 0.35 m.
How quickly does the typical wave travel?Waves that are relatively tiny move at speeds of up to 10 km/h and touch the shore once every three seconds. Though they travel at a speed of over 50 km/h, very huge waves arrive less frequently—once every 14 seconds—because of their longer wavelengths.
Learn more about the speed of wave here;
https://brainly.com/question/14015797
#SPJ4
In an engine, a piston oscillates with simple harmonic motion so that its position varies according to the following expression, where x is in centimeters and t is in seconds.x=(4.00cm)cos(3t+π/6)(a) At t=0, find the position of the piston.(b) What is its velocity?(c) What is its acceleration?(d) Find the period and amplitude of the motion.
Answers
A) 3.99 cm, B)-7.99 cm/s, C)-15 cm/s2, D) 4 cm, In an engine, a piston oscillates with simple harmonic motion so that its position varies according to the following expression,
a) At t=0
x=4.00cm)cos(3t+π/6)(a)= 4*0.999 = 3.999 cm
b)Expression for velocity v = dx/dt = -8.00 Sin(3t+π/6)
At t=0 v= -8 Sin(π/6) = -7.999 cm/s
c) Expression for acceleration a= -16 Cos(3t+ π/6)
At t=0 a= -16 Cos(π/6) = -15.99 cm/ sec2
d) Period = (2 ?)/3
Amplitude= 4 cm
A piston is a part of a variety of comparable devices, including reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders, and pneumatic cylinders.
Learn more about piston here:
https://brainly.com/question/21852769
#SPJ4
a lab group investigates the maximum weight students can lift with their arms compared to their legs. if their t' value was 0.35, which of the following conclusions would be justified?
Answers
A lab group investigates the maximum weight students can lift with their arms compared to their legs. if their t' value was 0.35, there is difference between the arms and legs data. The correct option is (B).
Difference between the measured value and the targeted true value for the physical quantity?
Measurement error.
The appropriate response to the foregoing question is because_________
The disparity between means was larger than the total uncertainty.
To know more about physical quantity visit
https://brainly.com/question/26171158
#SPJ4
The complete question is:-
A lab group investigates the maximum weight students can lift with their arms compared to their legs. if their t' value was 0.35, which of the following conclusions would be justified?
a.)There is no significant difference between the arms and legs data.
b.)There is difference between the arms and legs data.
c.)It's unlikely difference between the arms and legs data.
d.)It's likely difference between the arms and legs data.
higher than its surroundings
2) An object will normally be a net radiator of energy when its temperature is
A) lower than its surroundings.
B) higher than its surroundings.
C) neither of these.
Answers
When an object's internal energy is:... really when its temperature is higher than that of its surroundings, it will typically be a net radiator of energy.
What do you describe energy that moves from things with higher temperatures to those with lower temperatures as a result of the temperature difference?From one thing to another, heat energy can be exchanged. Heat is the flow or transfer that occurs as a result of the temperature differential between two objects.
What happens to an object's heat energy as its temperature drops?Heat is a means of transferring energy to and from molecules. Atoms and molecules accumulate thermal energy as the temperature rises, which leads them to move faster and further apart. When the temperature drops, atoms.
To know more about radiator visit:-
https://brainly.com/question/13934832
#SPJ4
It is very likely that human emissions of greenhouse gases are responsible for global warming. Give two examples of such activities and explain briefly how they cause global warming.
Answers
Greenhouse gases are gases that are present in the Earth's atmosphere and trap heat from the Sun, preventing it from radiating back out into space. Human activities that release greenhouse gases into the atmosphere can contribute to global warming. Two examples of such activities are:
Burning fossil fuels: The most common sources of greenhouse gas emissions are the burning of fossil fuels such as coal, oil, and natural gas. When these fuels are burned, they release large amounts of carbon dioxide into the atmosphere. Carbon dioxide is one of the most important greenhouse gases, and its increasing concentration in the atmosphere is a major contributor to global warming.Deforestation: Trees and other vegetation absorb carbon dioxide from the atmosphere as part of the process of photosynthesis. When trees are cut down and burned, or otherwise removed from the landscape, this carbon is released back into the atmosphere. Deforestation is therefore a major source of greenhouse gas emissions, and can contribute to global warming.Overall, human activities that release greenhouse gases into the atmosphere are a major cause of global warming. These activities can have serious consequences for the Earth's climate and can impact many aspects of human life.