A 5.35 M sugar solution is diluted from 240.0 mL to 862.5 mL. What is the concentration of the dilute solution

Answers

Answer 1

Answer:

1.345.0

Explanation:

Hope this helpssss


Related Questions

how does agriculture contribute to the global population in relation to health and food supplies?

Answers

Answer:

We present a quantitative analysis of global and regional food supply to reveal the flows of calories, protein and the micro-nutrients vitamin A, iron and zinc, from production through to human consumption and other end points. We quantify the extent to which reductions in the amount of human-edible crops fed to animals and, less importantly, reductions in waste, could increase food supply. The current production of crops is sufficient to provide enough food for the projected global population of 9.7 billion in 2050, although very significant changes to the socio-economic conditions of many (ensuring access to the global food supply) and radical changes to the dietary choices of most (replacing most meat and dairy with plant-based alternatives, and greater acceptance of human-edible crops currently fed to animals, especially maize, as directly-consumed human food) would be required. Under all scenarios, the scope for biofuel production is limited. Our analysis finds no nutritional case for feeding human-edible crops to animals, which reduces calorie and protein supplies. If society continues on a ‘business-as-usual’ dietary trajectory, a 119% increase in edible crops grown will be required by 2050.

Explanation:

Which of the following is a way to increase pressure on a gas?

Answers

Answer:

increase the number of gas particles

Explanation:

How do we know flowing water is the geologic process that formed the channel on Mars?

Answers

Evidence that water was once present on a planet is evidence that the planet may once have had living organisms. When landforms on different rocky planets look similar, it is evidence that they may have been formed by the same geologic process. The channel on Mars may have been caused by flowing water or flowing lava.

Hopes this helps :)

HELP!! what are the usual products of combustion reactions?

Answers

Explanation:

Carbon dioxide and water

I hope it helps

Answer:

The usual products of combustion reactions are carbon dioxide and water.

Explanation:

Combustion reaction is when a substance reacts with oxygen gas, resulting in a release of energy in the form of light and heat. Combustion reactions must have oxygen (O2) as one of the reactants.

7. What's the structure of methane, CH,? Is it polar or non-polar?
O A. Trigonal planar, polar
O B. Tetrahedral, polar
O C. Trigonal planar, non-polar
O D. Tetrahedral, non-polar

Answers

Answer:

The answer is D.

Explanation:

Methane (CH4) is a non-polar hydrocarbon molecule made of a single carbon atom and four hydrogen atoms. It is found in nature in the form of natural gas. It is non-polar because the difference in electronegativities between carbon and hydrogen is not sufficient to produce a polarized chemical connection between these two elements.

The methane molecule has a tetrahedral structure in terms of molecular geometry. Because the molecule is not planar, the angles between the H-C-H bonds are 109.5°, which is more than the 90° that they would be if the molecule were planar.

Explanation:

tetrahedral, non polar

You are given 1.091 grams of a white powder and told that it is a mixture of potassium carbonate and sodium carbonate. You are asked to determine the percent composition by mass of the sample. You add some of the sample to 10.00 mL of 0.8903 M nitric acid until you reach the equivalence point. When you have added enough carbonate to completely react with the acid, you reweigh your sample and find that the mass is 0.573 g. Calculate the mass of the sample that reacted with the nitric acid. Calculate the moles of nitric acid that reacted with the sample.

Answers

The sample of white powder contains 47.1% K2CO3 and 0.39% Na2CO3.

Molar mass of sodium carbonate = 106 g/mol

Molar mass of potassium carbonate = 138 g/mol

Number of moles of HNO3 = 10/1000 L × 0.8903 M = 0.008903 moles

Mass of HNO3 =  0.008903 moles × 63 g/mol = 0.56 g

Mass of sample added = 1.091 g

Mass of sample left over = 0.573 g

Mass of sample reacted = 1.091 g - 0.573 g = 0.518 g

The reacted sample contains xg of Na2CO3 and (0.518 - x) g K2CO3.

Na2CO3 + 2HNO3 --> 2NaNO3 + CO2 + H2O

106g of Na2CO3 reacts with 126g of HNO3

x g of Na2CO3 reacts with (126 × x/106)g of HNO3

K2CO3 + 2HNO3 --> 2KNO3 + CO2 + H2O

138 g of K2CO3 reacts with 126 g of HNO3

(0.518 - x) g of K2CO3 reacts with [(0.518 - x) × 126/138] g

Total mass of HNO3 used;

1.19x + 0.47 + 0.91x = 0.56

2.1x + 0.47 = 0.56

2.1x = 0.56 - 0.47

2.1x = 0.09

x =  0.09/2.1

x = 0.0043 g

Mass of K2CO3 = (0.518 - x) g = 0.518 - 0.0043 = 0.5137 g

Mass percent of K2CO3  = 0.5137 g/ 1.091 g × 100/1 = 47.1%

Mass percent of Na2CO3 = 0.0043/1.091 g × 100/1 = 0.39%

Learn more: https://brainly.com/question/9743981

The Difference between the number of protons and electrons give an atom it’s _________.

Answers

Answer:

it gives an atom its charge

How many grams are 0.300 moles of glucose, C6H12O6?

Answers

Answer:

Explanation:

Firstly, let us calculate the molar mass of the glucose. To find the molar mass we need to add the masses of individual elements which constitute one glucose molecule.

Now, we know that

Molar mass of Carbon C=12gmol−1

Molar mass of Hydrogen H=1gmol−1

Molar mass of oxygen O=16gmol−1

Therefore, Molar Mass of glucose (C6H12O6) can be calculated as shown below

⇒ 6×12+12×1+6×16

⇒72+12+96⇒180gmol−1

Given mass of glucose = 300g

Now, we can calculate the number of moles in given mass of glucose, using the below formula,

Using the Formula numberofmoles=givenmassmolarmass we get

numberofmoles=300180 = 1.7 moles or 2 moles (approx.)

Hence the number of moles present in 300 g of glucose is 1.7 moles or 2 moles approximately.

true or false: When the value of secondary quantum no . (l) =1 , the magnetic quantum no . ( m ) = 3 .​

Answers

When the value of secondary quantum number (l) = 1, the magnetic quantum number can be from -1 to +1. The answer would be false.

What are Quantum numbers?

The angular quantum number (l) can take any integer between 0 and the value of the principal quantum number (n) less by 1.

In other words, l can be from 0 to n-1.

The magnetic quantum number (m), on the other hand, can take any value between -l to +l.

For example, if l = 1, m can be -1,0, and +1.

More on quantum numbers can be found here: https://brainly.com/question/16977590

#SPj1

Page No. Date Chemistry traignment Scientific Notation Covert 0.00000046 in to Scientific Notation

Answers

Answer:

answer is 4.6×10 with exponent 7

Answer:

[tex]4.6\times10^{-7}[/tex]

Explanation:

Remember that if the decimal point is to the right then the exponent is a negative.

[tex]4.6\times10^{-7}[/tex]

Move the decimal point to the left:

[tex].0.0.0.0.0.0.4.6[/tex]

[tex].0.0.0.0.0.0.4.6=0.00000046[/tex]

Hope this helps

helpp
What mass of carbon dioxide will be produced if
144 g of carbon react with 384 g of oxygen gas
according to the equation C+02 → CO2?

Answers

The mass of the carbon dioxide that will be produced when 144 g of carbon react with 384 g of oxygen gas is 528 g

We'll begin by calculating the masses of C and O₂ that reacted and the mass of CO₂ produced from the balanced equation.

C + O > CO

Molar mass of C = 12 g/mol

Mass of C from the balanced equation = 1 × 12 = 12 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 1 × 32 = 32 g

Molar mass of CO₂ = 12 + (2×16) = 44 g/mol

Mass of CO₂ from the balanced equation = 1 ×44 = 44 g

SUMMARY:

From the balanced equation above,

12 g of C reacted with 32 g of O₂ to produce 44 g of CO₂

Next, we shall determine the limiting reactant

From the balanced equation above,

, 12 g of C reacted with 32 g of O₂.

Therefore,

144 g of C will react with = (144 × 32)/12 = 384 g of O₂.

From the calculations made above, we can see that both C and O₂ are sufficient for the reaction. Thus, C and O₂ are both limiting reactants.

Finally, we shall determine the mass of CO₂ obtained from the reaction.

From the balanced equation above,

balanced equation above, 12 g of C reacted to produce 44 g of CO₂.

Therefore,

144 g of C will react to produce = (144 × 44)/12 = 528 g of CO₂.

Thus, the mass of CO₂ obtained from the reaction is 528 g

Learn more: https://brainly.com/question/12968502

please help asap!!!!!!!

Answers

Answer:

c) single bonds, double bonds, carbon atoms and hydrogen atoms

what is the best way to make a supersaturated solution?
A: Heat the solution
B: Stir the Solution
C: Evaporate the solution
D: Cool the solution

Answers

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

The structure of Disodium edta

Answers

Answer:

EDTA disodium salt | C10H14N2Na2O8

Explanation:

Please help asap chemistry worksheet doesn’t make sense

Answers

Answer:

dog dog im not gon hold u we kinda screwed

A 4.0 L flask containing N2 at 15 atm is connected to a 4.0 L flask containing H2 at 7.0 atm and the gases are allowed to mix. What is the mole fraction of N2

Answers

The mole fraction of N₂ after the mixture of 4.0 L of N₂ at 15 atm with 4.0 L of H₂ at 7.0 atm is 0.68.

We can calculate the mole fraction of N₂ with the following equation:

[tex] X_{N_{2}} = \frac{n_{N_{2}}}{n_{t}} = \frac{n_{N_{2}}}{n_{N_{2}} + n_{H_{2}}} [/tex]   (1)

The number of moles of N₂ and H₂ can be found with the ideal gas law:

[tex] PV = nRT [/tex]

Where:

P: is the pressure

R: is the gas constant

T: is the temperature

V: is the volume

For nitrogen gas we have:

[tex] n_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{RT} [/tex]   (2)

And for hydrogen:

[tex] n_{H_{2}} = \frac{P_{H_{2}}V_{H_{2}}}{RT} [/tex]   (3)

After entering equations (2) and (3) into (1), we get:

[tex] X_{N_{2}} = \frac{\frac{P_{N_{2}}V_{N_{2}}}{RT}}{\frac{P_{N_{2}}V_{N_{2}}}{RT} + \frac{P_{H_{2}}V_{H_{2}}}{RT}} [/tex]  

Since RT are constants, we have:

[tex] X_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{P_{N_{2}}V_{N_{2}} + P_{H_{2}}V_{H_{2}}} [/tex]                

We know that:

[tex] P_{N_{2}} = 15 atm[/tex]                

[tex] V_{N_{2}} = 4.0 L[/tex]                

[tex] P_{H_{2}} = 7.0 atm[/tex]                

[tex] V_{H_{2}} = 4.0 L[/tex]          

so:

[tex] X_{N_{2}} = \frac{15 atm*4.0 L}{15 atm*4.0 L + 7.0 amt*4.0 L} = 0.68 [/tex]                

Therefore, the mole fraction of N₂ is 0.68.

Find more here:

https://brainly.com/question/4147359?referrer=searchResults

I hope it helps you!

What is it called when you have hydrogen peroxide that just eventually turns into water

Answers

Answer:

chlorine

Explanation:

Answer:chlorine reacts with hydrogen peroxide

Explanation:

A radioactive sample has a half life of 1 hour. If you start with 1.000 gram of it at noon, how much of it remains at 4pm

Answers

The amount of the sample remaining at 4pm is 0.0625 g

We'll begin by calculating the number of half-lives that has elapsed

Half-life (t½) = 1 hour

Time (t) = 4 hour

Number of half-lives (n) =?

n = t / t½

n = 4 / 1

n = 4

Finally, we shall determine the amount the sample remaining at 4pm

Number of half-lives (n) = 4

Initial amount (N₀) = 1 g

Amount remaining (N) =?

[tex]N = \frac{N_0}{ {2}^{n}} \\ \\ N = \frac{1}{ {2}^{4}} \\ \\ N = \frac{1}{16} \\ \\ N = 0.0625 \: g[/tex]

Thus, the amount remaining at 4pm is 0.0625 g

Learn more: https://brainly.com/question/25750315

What is the temperature, in Celsius, of 20.8 g of carbon dioxide (CO2) in a 575 mL container under 1.5 atm of pressure?

Answers

Answer:

Ideal Gas Law Calculator. Easily calculate the pressure, volume, temperature or quantity in moles of a gas using this combined gas law calculator (Boyle's law calculator, Charles's law calculator, Avogadro's law calculator and Gay Lussac's law calculator in one).Supports a variety of input metrics such as Celsius, Fahrenheit, Kelvin, Pascals, bars, atmospheres, and volume in both metric and

What identifies the number of protons in the nucleus of an atom?

Answers

Answer: Atomic number

Explanation:

I hope this helps you!

A particular reaction has a DH o value of -164 kJ and DS o of -185 J/K at 298 K. Calculate DG o at 617 K in kJ (with 3 significant digits), assuming that DH o and DS o hardly change with temperature

Answers

Answer:

e

Explanation:

crude oil is a liquid kind of___________

what is the answer?

Answers

What kind of liquid is crude oil?

First, let's get to know what is crude oil.

crude oil is a naturally occuring petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil is refined to produce usable products including gasoline, diesel, and various other forms of petrochemicals.

What kind of liquid is crude oil?

crude oil is a mixture of comparatively volatile liquid hydrocarbons (compounds composed mainly of hydrogen and carbon), though it also contains some nitrogen, sulfur, and oxygen. those elements form a large variety of complex molecular structures, some of which can be readily identified. regardless of variations, however, almost all crude oil ranges from 82 to 87 carbon by weight and 12 to 15 hydrogen by weight.

What are the uses of crude oil?

crude oil has many uses as the following:

plastics. plastics requires crude oil for it's production.clothing materials like T-shirt, and Short pants.products in your home like furnitures, and kitchenware.transportationget high-quality bulk fuels from Kendrick oil.

so now you know the uses and importance of crude oil.

#let's study

Which statement best describes mechanical energy?

A.the energy of heat and magnetism

B.the energy of electricity and motion

C.the energy of moving parts and motion


D.the energy of electricity and heat

Answers

Answer:

the answer is B.

Explanation:

your welcome

Answer:

the answer is B

Explanation:

i have the same exact questionn

Can someone help me out with this question and explain me the answer too!!! Please

Answers

Answer:

sorry i dont know

Explanation:

2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K

Answers

Explanation:

BaF2(s) <------> Ba2+(aq) + 2F-(aq)

Ksp BaF2 =  1.0 x 10^-6.

Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium

When Qsp >Ksp, BaF2 will precipitate

Qsp = [Ba2+(aq)]×[F-(aq)]^2

[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.

0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6

[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6

[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6

[F- (aq)] > 9.05 × 10^-3 moldm-3

So F- concentration should be more than 9.05 × 10^-3 moldm-3

3.833 kJ of heat is required to convert a 36.8 g sample of ethyl
alcohol from the solid to liquid phase. What is the heat of
fusion of ethyl alcohol in J/g?

Answers

The heat of fusion of the given sample of the ethyl alcohol is 104.16 J/g.

The given parameters:

heat required to convert 36.8 g sample of ethyl alcohol, Q  = 3.3833 kJmass of the  ethyl alcohol, m = 36.8 g

The heat of fusion of the given sample of the ethyl alcohol converted from solid to liquid phase is calculated as follows;

[tex]H_f = \frac{Q}{m} \\\\H_f = \frac{3.833 \times 10^3\ J}{36.8 \ g} \\\\H_f = 104.16 \ J/g[/tex]

Thus, the heat of fusion of the given sample of the ethyl alcohol is 104.16 J/g.

Learn more here:https://brainly.com/question/15950909

10) Explain which substance(s) would you expect to be a gas at standard
temperature and pressure (STP).
NI3
BF3
PC13
A) BF3
Its molecules are nonpolar and, therefore, are subject only to
dispersion forces.
B) NI3
Its molecules are polar and possess dipole-dipole interactions
therefore allowing them to exist as a gas.
C) PCL3
Its molecules are slightly polar and, therefore, possess dipole-
dipole interactions. However, they are weak enough to allow it
to exist as a gas.
D) Nlz and BF3
Both molecules are very light in mass. Therefore, they have
weak dispersion forces which causes them to be attracted very
weakly and exist as a gas.

Answers

Answer:BF3

Explanation:USA test prep

why do you continuously gain exactly the amount of mass you consume with each meal

Answers

Answer:

It depends on how much the calories and fat there is in the meals and if you don't get enough physical activity of the same amount of food that you eat it can lead to weight gain

Explanation:

How many moles of potassium iodide, KI, are required to precipitate all of the lead (II) ion from 25.0 mL of a 1.6 M Pb(NO3)2 solution? (First, write a balanced equation for the reaction.)

Answers

0.04 moles of iodide is required to precipitate all the lead II ions from  25.0 mL of a 1.6 M Pb(NO3)2 solution.

The reaction equation is;

2KI(aq) + Pb(NO3)2(aq) -------> PbI2(s) + 2KNO3(aq)

The net ionic equation is;

Pb^2+(aq) + 2I^-(aq) ------> PbI2(s)

Number of moles of Pb(NO3)2  = 25/1000 L ×  1.6 M = 0.04 moles

Number of moles of Pb^2+ = 0.04 moles /2 = 0.02 moles

Since 2 moles of iodide reacts with 1 mole of Pb^2+

x moles of iodide reacts with 0.02 moles of Pb^2+

x =  2 moles × 0.02 moles/ 1 mole

x = 0.04 moles of iodide

Hence,  0.04 moles of iodide is required to precipitate all the lead II ions from  25.0 mL of a 1.6 M Pb(NO3)2 solution.

Learn more: https://brainly.com/question/9743981

Natural gas is almost entirely methane. A container with a volume of 2.65L holds 0.120mol of methane. What will the volume be if an additional 0.182mol of methane is added to the container under constant temperature and pressure? Give your answer in three significant figures.

Answers

The final volume of the methane gas in the container is 6.67 L.

The given parameters;

initial volume of gas in the container, V₁ = 2.65 Linitial number of moles of gas, n₁ = 0.12 moladditional concentration, n = 0.182 mol

The total number of moles of gas in the container is calculated as follows;

[tex]n_t = 0.12 + 0.182 = 0.302 \ mol[/tex]

The final volume of gas in the container is calculated as follows;

[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1 n_2}{n_1} \\\\V_2 = \frac{2.65 \times 0.302}{0.12} \\\\V_2 = 6.67 \ L[/tex]

Thus, the final volume of the methane gas in the container is 6.67 L.

Learn more here:https://brainly.com/question/21912477

Other Questions
__________ are essential components of any personal training plan. A.Intensity and proteinB.Steroids and restC.Rest and recoveryD.Overload and fastingPlease select the best answer from the choices provided.ABCDMark this and return What is a good estimate for 280% of 30? Explain. How do you write 2,020 in scientific notation? Which of the following statements best supports the one gene-one enzyme hypothesis?. The total cost of 1 pencil and 2 erasers is 8, and the total cost of 2 pencils and 4 erasers is 20, as shown below:Let the cost of 1 pencil be x, and the cost of 1 eraser be y. Write two linear equations in x and y: Christianity is rooted from what religion? Which is true of these lines? in which town does the total number have meaning If oligopoly firms decide to work together, either formally or informally, and honor the agreement then profits can be ________ by ________ output and ________ the price of goods and services. maximized; increasing; increasing maximized; increasing; increasing maximized; reducing; increasing maximized; reducing; increasing minimized; reducing; increasing : Mt khu t 20 ha ngi ta trng hai loi cy ng v khoai. Nng sut ca ng tnh theo x ha c (5-x/4) tn trn 1 ha v nng sut ca khoai tnh theo y ha c (7-y/4) tn trn 1 ha. Xc nh din tch trng tng loi cy sn lng thu c l ln nht. A 0.5 kg cheeseburger is lobbed at a particularly unhappy customer with a force of 10 N.While it is being thrown, what is the acceleration experienced by the cheeseburger?Answer in units of m/s2 What is hypothesis and axioms? I need help with dis plz!!the question dat says before amoeba is advantageous also why Knowing that a squence (a of n) is monotonically increasing and it's subsequence is convergent to a value AlR (for any n1 How do I prove that (a of n) converges to A aswell. A non-greasy binder is used to create pastels.TrueFalse PLEASE HELP THIS IS DUE TODAY!!Compose complete sentences in French describing what the people in the illustrations are doing. Part BTransform the equation that you identified in part A so the variable k is alone on one side of the equation. SUBJECT : SCIENCEthe change in temperature will not be the same for all substances assuming that the same amount of heat is added or subtracted because is a monedero masculine or feminineplease hurry up