Answer:
$1.26
Explanation:
Power =energy/ time
energy =powerxtime
energy =50x31x24=37200
=37.2kwh
1kwh =3.39
37.2kwh=3.39x37.2=126.108cent
=$1.26
The greatest ocean depths on the Earth are found in the Marianas Trench near the Philippines. Calculate the pressure (in atm) due to the ocean at the bottom of this trench, given its depth is 10.3 km and assuming sea water density is constant all the way down. atm
Answer:
[tex]P = 103867260[/tex] atm
Explanation:
The pressure at the bottom of any liquid column is equal to product of density of the liquid , gravitational acceleration constant (g) and height of the water column
Thus, [tex]P = \rho*g*h[/tex]
Substituting the given values, we get -
[tex]P = 1029[/tex] kg/m3 [tex]* 9.8[/tex] m/s^2 [tex]*10.3 *1000[/tex] meters
[tex]P = 103867260[/tex] atm
These two questions are connected to the figure.
Answer:
A, and E
Explanation:
A trumpeter plays at a sound level of 75dB. three equally loud trumpet players join in. what is the new sound level?
someone is pushing a shopping cart and maintaining the same applied force. another person keeps adding items into the cart increasing the mass of cart. what would happen to the acceleration?
Answer:
The rate of acceleration slow
Explanation:
Force (N) = mass (kg) × acceleration (m/s²) , because acceleration multiply by mass it a inverse relationship
A swift blow with the hand can break a pine board. As the hand hits the board, the kinetic energy of the hand is trans- formed into elastic potential energy of the bending board, if the board bends far enough, it breaks. Applying a force to the center of a particular pine board deflects the center of the board by a distance that increases in proportion to the fore. Ultimately the board breaks at an applied force of 800 N and a deflection of 1.2 cm.
a. To break the board with a blow from the hand, how fast must the hand be moving? Use 0.50 kg for the mass of the hand.
b. If the hand is moving this fast and comes to rest in a dis- tance of 1.2 cm, what is the average force on the hand?
(a) The velocity is "6.2 m/s".
(b) The average force is "800.83 N".
According to the question,
Force,
F = 800 NDeflection,
x = 1.2 cm= [tex]1.2\times 10^{-2} \ m[/tex]
As we know,
The work done,
→ [tex]W = F\times d[/tex]
[tex]= 800\times 1.2\times 10^{-2}[/tex]
[tex]= 9.6 \ J[/tex]
(a)
Given:
Mass of hand,
m = 0.50 kgNow,
→ [tex]\frac{1}{2} mv^2 = 9.6 \ J[/tex]
[tex]v = \sqrt{\frac{2\times 9.6}{0.50} }[/tex]
[tex]= 6.2 \ m/s[/tex]
(b)
→ [tex]v^2 = u^2 +2ax[/tex]
→ [tex]a= \frac{v^2}{2x}[/tex]
[tex]= \frac{(6.2)^2}{2\times 1.2\times 10^{-2}}[/tex]
[tex]= 1601.67 \ m/s^2[/tex]
hence,
The average force will be:
→ [tex]F_{avg} = m\times a[/tex]
[tex]= 0.50\times 1601.67[/tex]
[tex]= 800.83 \ N[/tex]
Thus the above answers are correct.
Learn more:
https://brainly.com/question/23115729
11) A tank of kerosene with density of 750 kg/m3 has a syphon used to remove the fluid that then exits into the local atmosphere, with pressure of 101 kPa. The pressure above the kerosene in the tank is 120 kPa absolute. The syphon tube has a diameter of 2 cm, exits the tank rising to 10 cm above the level of the kerosene and then drops down to 15 cm below the level of the kerosene where it exits into the atmospheric pressure. Calculate the exit velocity from the tube.
Answer:
[tex]7.32\ \text{m/s}[/tex]
Explanation:
[tex]v_1[/tex] = Velocity at initial point = 0
[tex]P_1[/tex] = Pressure in tank = 120 kPa
[tex]P_2[/tex] = Pressure at outlet = 101 kPa
[tex]\rho[/tex] = Density of kerosene = [tex]750\ \text{kg/m}^3[/tex]
[tex]Z_1[/tex] = Tank height = 15 cm
[tex]Z_2[/tex] = Height of pipe exit = 0
[tex]g[/tex] = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
From Bernoulli's equation we have
[tex]\dfrac{P_1}{\rho g}+\dfrac{v_1^2}{2g}+Z_1=\dfrac{P_2}{\rho g}+\dfrac{v_2^2}{2g}+Z_2\\\Rightarrow \dfrac{P_1}{\rho g}+Z_1=\dfrac{P_2}{\rho g}+\dfrac{v_2^2}{2g}\\\Rightarrow v_2=\sqrt{2g(\dfrac{P_1}{\rho g}+Z_1-\dfrac{P_2}{\rho g})}\\\Rightarrow v_2=\sqrt{2\times 9.81(\dfrac{120\times 10^3}{750\times 9.81}+0.15-\dfrac{101\times 10^3}{750\times 9.81})}\\\Rightarrow v_2=7.32\ \text{m/s}[/tex]
The exit velocity from the tube is [tex]7.32\ \text{m/s}[/tex].
The energy an object possesses due to its motion
You're an electrical engineer designing an alternator (the generator that charges a car's battery). Mechanical engineers specify a 10-cmcm-diameter rotating coil, and you determine that you can fit 250 turns in this coil. To charge a 12-VV battery, you need a peak output of 17 VV when the alternator is rotating at 1500 rpm.
What do you specify for the alternator's magnetic field?
Answer:
13.78 mT
Explanation:
The peak voltage ε = ωNAB where ω = angular speed of coil = 1500 rpm = 1500 × 2π/60 rad/s = 50π rad/s = 157.08 rad/s, N = number of turns of coil = 250, A = area of coil = πr² where r = radius of coil = 10 cm = 0.10 m,
A = π(0.1 m)² = 0.03142 m² and B = magnetic field strength
So,
B = ε/ωNA
substituting the values of the variables into the equation given that ε = 17 V
So, B = ε/ωNA
B = 17 V/(157.08 rad/s × 250 turns × 0.03142 m²)
B = 17 V/(1233.8634 rad-turns-m²/s)
B = 0.01378 T
B = 13.78 mT
What is the mass of 1.000 L of seawater? kg
Answer:
1000 L= 1000 kg
1.000 L= 1.000 kg
Explanation:
It will be the same because L and kg have the same mass
A classic demonstration illustrating eddy currents is performed by dropping a permanent magnet inside a conducting cylinder. The magnet does not go into free fall. Instead it reaches terminal velocity and can take a few seconds to drop a length of about a meter. Suppose the mass of the magnet is 70 g and width of 1.0 cm. It falls with a terminal velocity of 10 cm/s and the length of the pipe is 80 cm. The magnitude of the Joule heating from the eddy currents is approximately:________
Answer:
The correct solution is "0.69 N".
Explanation:
The given values are:
Mass of magnet,
m = 70 g
or,
= 0.07 kg
Width,
= 1.0 cm
Velocity,
= 10 cm/s
Length of the pipe,
= 80 cm
Whenever the velocity is constant, then the net force which is acting on the magnet will be "0".
On the magnet,
The up-ward force will be:
⇒ [tex]F=mg[/tex]
On substituting the values, we get
⇒ [tex]=0.07\times 9.8[/tex]
⇒ [tex]=0.69 \ N[/tex]
When a wave of light strikes a diffraction screen (or grating) it will cause the wave to pass through each slit, causing the emerging light to radiate outward as if from a new source. These newly formed waves create alternating patterns of constructive and destructive interference, which can be observed when projected onto a screen. Select the variables listed below that determine the angle at which these patterns occur (you might need to select more than one answer):
Answer:
The answer is "the angle depends on wavelength and distance of slits".
Explanation:
[tex]d \sin \theta = m\lambda[/tex] as well as angular, of mth order darkened border is indicated only by angular position, the [tex]\theta[/tex] mth order bright border generated by a light wavelength [tex]\lambda[/tex] , and use the grating of the segregation slit.
[tex]d \sin \theta = ( m + \frac{1}{2}) \lambda[/tex]
Therefore, [tex]\theta[/tex] depends on d and [tex]\lambda[/tex] for a specific order.
Someone tryna help a homie out
Answer: thats hard...
Explanation:1 c
2 a
3 b
4 d
6 b
7 a
8 b
i tried
What is the wavelength associated with 0.113kg ball traveling with velocity of 43 m/s?
Answer:
Wavelength = 1.36 * 10^{-34} meters
Explanation:
Given the following data;
Mass = 0.113 kg
Velocity = 43 m/s
To find the wavelength, we would use the De Broglie's wave equation.
Mathematically, it is given by the formula;
[tex] Wavelength = \frac {h}{mv} [/tex]
Where;
h represents Planck’s constant.
m represents the mass of the particle.
v represents the velocity of the particle.
We know that Planck’s constant = 6.6262 * 10^{-34} Js
Substituting into the formula, we have;
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{0.113*43} [/tex]
[tex] Wavelength = \frac {6.6262 * 10^{-34}}{4.859} [/tex]
Wavelength = 1.36 * 10^{-34} meters
A proton moving at v1 = 7.0 Mm/s collides elastically head-on with a second proton moving in the opposite direction at v2 = 8.3 Mm/s. (a) Find the velocity of the first proton after the collision. (b) Find the velocity of the second proton after the collision
Answer:
(a) The final velocity of the first proton after the collision = 8.3 m/s in the opposite to its initial direction
(b) The final velocity of the second proton after the collision = 7 m/s in the opposite to its initial direction
Explanation:
The given parameter of the protons are;
The velocity of the first proton, v₁ = 7.0 Mm/s
The velocity of the second proton, v₂ = -8.3 Mm/s
The type of collision = Elastic collision
In an elastic collision, the kinetic and momentum energies are conserved, therefore, we have, for the initial and final momentums;
(m₁·v₁ + m₂·v₂)₁ = (m₁·v₁ + m₂·v₂)₂
1/2·(m₁·v₁² + m₂·v₂²)₁ = 1/2·(m₁·v₁² + m₂·v₂²)₂
Where, m₁ = m₂ or the protons, we get;
(v₁ + v₂)₁ = (v₁ + v₂)₂
(v₁² + v₂²)₁ = (v₁² + v₂²)₂
Therefore;
7.0 - 8.3 = v₁ + v₂
-1.3 = v₁ + v₂...(1)
7.0² + (-8.3)² = v₁² + v₂²
117.49 = v₁² + v₂²...(2)
From equation (1), we have;
v₁ = -1.3 - v₂
Plugging the value v₁ = -1.3 - v₂ in equation (2) gives;
117.49 = v₁² + v₂² = (-1.3 - v₂)² + v₂² = 2·v₂² + 12·v₂ + 1.69
∴ 2·v₂² + 2.6·v₂ + 1.69 - 117.49 = 0
2·v₂² + 2.6·v₂ - 115.8 = 0
Using the quadratic formula, we have;
v₂ = (-2.6 ± √(2.6² - 4×2×(-115.8)))/(2 × 2)
∴ v₂ ≈ -8.3 m/s or 7 m/s
When v₂ ≈ -8.3, v₁ = -1.3 - v₂ ≈ -1.3 - (-8.3) = 7
When v₂ ≈ 7, v₁ = -1.3 - v₂ ≈ -1.3 - (7) = -8.3
Therefore, the final velocity of the first proton after the collision = 8.3 m/s in the opposite to its initial direction
(b) The final velocity of the second proton after the collision = 7 m/s in the opposite to its initial direction.
Which two mixtures are homogeneous?
Answer:
sand and air
Explanation:
air is a mix of carbon dioxide and oxygen and sand is a mix of rocks and stuff
solve this with figure.help me ......
[tex] \huge\mathfrak\purple{Hope \: it \: helps}\ [/tex]
Difference between corpuscular theory and wave theory
Answer:
Explanation:
Isaac Newton argued that the geometric nature of reflection and refraction of light could only be explained if light were made of particles, referred to as corpuscles, because waves do not tend to travel in straight lines.
Polarizing windows, filters, etc. are often used to reduce the amount of light that enters the lens of a camera or into a room or a car. A library atrium has an overhead skylight that lets in too much light during the day which heats up the interior of the library far too much. The building engineer installs new double paned polarizing sky lights to reduce the intensity. If sunlight, which is unpolarized, has an average intensity of 1250 W/m^2.
Required:
What angle should the polarizing axis of the second pane of the window make with the polarizing axis of the first pane of the window in order to reduce the intensity of the sunlight to 33% of the original value?
Answer:
The answer is "[tex]35.6^{\circ}[/tex]"
Explanation:
The sunlight level of the first panel:
[tex]I_1 = \frac{I_o}{2}[/tex]
When the light of this intensity passes through the second window:
[tex]I_2 = I_1 \cos^2 \theta\\\\I_2 = \frac{I_o}{2} \cos^2 \theta[/tex]
[tex]\frac{I_2}{I_o} = 0.33 (33\%) \\\\[/tex]
therefore,
[tex]0.33 = \frac{1}{2} \cos^2 \theta\\\\\cos^2 \theta = 0.66\\\\\cos \theta = \sqrt{0.66} = 0.8124\\\\\theta = \cos^{-1}( 0.8124) = 35.6^{\circ}\\\\[/tex]
Tarnish is produced by a redox reaction that occurs when a metal reacts with
a nonmetallic compound. The green tarnish on a copper penny might be
produced by a reaction between copper and hydrogen sulfide. What occurs
during this reaction?
A. Hydrogen sulfide acts as an acid, and copper acts as a base.
B. Copper atoms gain electrons from sulfur atoms.
C. A double-replacement reaction takes place.
D. Copper atoms lose electrons to sulfur atoms.
Answer:
Copper atoms lose electrons to sulfur atoms
Explanation:
a p e x (:
Question 4 of 10 A student measures the time it takes for two reactions to be completed. Reaction A is completed in 39 seconds, and reaction B is completed in 50 seconds. What can the student conclude about the rates of these reactions? A. The rate of reaction B is higher B. The rate of reaction A is higher. C. The rates of reactions A and B are equal.
Answer:
B. the rate of reaction is higher
Explanation:
How are rainbows made?
Answer:
when it rains and at the same time it sunny there would appear a rainbow
Which function represents g(x), a reflection of f(x) = 6(one-third) Superscript x across the y-axis?
Answer:
g(x)=6(3)°x
[tex]g(x) = 6(3){x} [/tex]
5. How does a jack make changing a tire easier?
Answer: An jack makes changing a tire easier because it lifts up the car to get the tire off of the ground.
Explanation:
If a ball rolls down a hill at a speed of 6.5m/s for 7s, how far did it travel?
Answer:
DABABY CONVERTIBLE LESS GOOO HA YE YE
En una balanza de fábrica se determina la masa de un cuerpo y se obtiene
1 M kg 280
con
un error aparente
1 1 0,5 a
M kg
. En un laboratorio, se hace lo mismo con otro cuerpo y
se determina
2 M g 23,545
con un error
2 2 0,001 a
M g .
¿Dónde se cometió mayor erro
do u ever think that how are u living cause we could not even be here and God but made us but had did it all started I believe in god btw I'm just saying how
Answer:
What is the question
Explanation:
lol
places where computers is used
Answer:
Banks and financial.
Business.
Communication.
Defense and military.
Education.
Internet.
Medical.
Transportation.
etc..
Answer:
Super markets
Hospitals
Industries
Explanation:
In supermarket's computers helps them manage and organise data .
An electric motor operates a pump that irri-
gates a farmer's crop by pumping 10 000 L of
water a vertical distance of 8.0 m into a field
each hour. The motor has an operating resis-
tance of 22.0 2 and is connected across a
110-V source.
a. What current does it draw?
b. How efficient is the motor?
Answer:
a. 5A
b. 39.60%
Explanation:
The computation is shown below:
a. The current does it draw is
= v ÷ R
= 110v ÷ 22
= 5A
b. Now the efficiency of the motor is
n = mgh ÷ vlt
= (10,000 × 9.8 × 8) ÷ (5 × 3600 × 110)
= 784000 J ÷ 1,980,000
= 39.60%
hence, the above formulas are applied & the same is relevant
A 100-n object and a 50-n object are placed on scales a and b respectively inside an elevator ascending with constant velocity 3.0m/s which statement below correctly describes the readings on the scales inside the elevator
Answer: b
Explanation:
The reading of the scale of the elevator ascending with constant velocity is 150 N.
Reading of the scale
The reading of the scale on the elevaor is calculated by applying Newton's second law of motion;
R = m(a + g)
R = ma + mg
R = F + W
where;
a is the acceleration of the objectsAt constant velocity, the acceleration of the object is zero (0).
R = 0 + 100 + 50
R = 150 N
Thus, the reading of the scale of the elevator ascending with constant velocity is 150 N.
Learn more about reading of scale here: https://brainly.com/question/2516315
1. The process of producing energy by utilizing heat trapped inside the earth's
surface is called
A) Hydrothermal energy
C) Solar energy
B) Geo-Thermal energy
D) Wave energy
Answer:
B
Explanation:
The process is called Geo-Thermal energy because it's an inexhaustible source of energy