Answer:
The minimum uncertainty in its position is 1.85 x 10⁻³² m.
Explanation:
Given;
mass of the ball, m = 47.5 g = 0.0475 kg
speed of the ball, v = 30 m/s
measuring accuracy of the speed, = 0.2% = 0.002
The uncertainty in measurement of momentum;
ΔP = mΔv
ΔP = (0.0475)(30 x 0.002)
ΔP = 2.85 x 10⁻³ kgm/s
The uncertainty in position is calculated as;
[tex]\delta x \geq \frac{h}{4\pi (\delta P)}[/tex]
where;
h is Planck's constant
[tex]\delta x \geq \frac{6.626 \ \times \ 10^{-34}}{4\pi (2.85 \ \times \ 10^{-3})} \\\\\delta x \geq 1.85 \ \times \ 10^{-32} \ m[/tex]
Thus, the minimum uncertainty in its position is 1.85 x 10⁻³² m.
Q3) Salman walks to the mosque with speed 2.4 m/s. If it takes him 3 min to
reach the mosque. Find the distance.
Answer: 432m
Explanation:
Convert 3 min to seconds
1 min = 60 sec
3 min = 180 sec
Multiply the speed times time to get distance.
2.4 x 180 = 432m
How will a metal container full of hot water in vaccum lose heat?
Sketch the electric field around these two objects if they have the same sign of charge. Make a separate drawing showing equipotential lines around the two charges. The potential is defined to be zero at infinity. Identify the line of zero potential between the two charges, if there is one.
Answer:
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
Explanation:
The electric field around two objects with charge of the same sign, for simplicity suppose that the objects have positive point spherical charges,
E = k q / r2
bold letters indicate vectors, therefore the total electric field is
E_total = E1 + E2
the module of this field is
E_total = E1- E2
therefore we can outline this field
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
An outline of these shows in Attachment A
The equipotential surfaces are defined as being perpendicular to the electric field lines since the electric field and the power difference are related
E = [tex]\frac{dV}{dx} i^ + \frac{dV}{dy} j^ + \frac{dV}{dz} k^ = \Delta V[/tex]
We can schematize some characteristics of these surfaces
* very close to each load are spherical surfaces
* very far from the load is an elliptical surface, which envelops the loads
* between them there is a point of zero potential point C
See attached part B
During the study of the objects,What we can observe
The masses of the two moons are determined to be 2M2M for Moon AA and MM for Moon BB . It is observed that the distance between Moon BB and the planet is two times that of the distance between Moon AA and the planet. How does force exerted from the planet on Moon AA compare to the force exerted from the planet on Moon BB
Answer:
F_A = 8 F_B
Explanation:
The force exerted by the planet on each moon is given by the law of universal gravitation
F = [tex]G \frac{m M}{r^{2} }[/tex]
where M is the mass of the planet, m the mass of the moon and r the distance between its centers
let's apply this equation to our case
Moon A
the distance between the planet and the moon A is r and the mass of the moon is 2m
F_A = G \frac{2m M}{r^{2} }
Moon B
F_B = G \frac{m M}{(2r)^{2} }
F_B = G \frac{m M}{4 r^{2} }
the relationship between these forces is
F_B / F_A = [tex]\frac{1}{2 \ 4 }[/tex] = 1/8
F_A = 8 F_B
Answer:
F_A = 8 F_B
Explanation:
The force exerted by the planet on each moon is given by the law of universal gravitation
F =
where M is the mass of the planet, m the mass of the moon and r the distance between its centers
let's apply this equation to our case
Moon A
the distance between the planet and the moon A is r and the mass of the moon is 2m
F_A = G \frac{2m M}{r^{2} }
Moon B
F_B = G \frac{m M}{(2r)^{2} }
F_B = G \frac{m M}{4 r^{2} }
the relationship between these forces is
F_B / F_A = = 1/8
F_A = 8 F_B
An automobile which set the world record for acceleration increase speed from rest to 96 km/h in 3.07 seconds what distance traveled by the time the final speed was achieved
Answer:
41.02m
Explanation:
Given parameters:
Initial velocity = 0m/s
Final velocity = 96km/hr
Time taken = 3.07s
Unknown:
Distance traveled by the time the final speed was achieved = ?
Solution:
To solve this problem, we first find the acceleration of the car;
Acceleration = [tex]\frac{v - u }{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now convert the the final velocity to m/s;
96km/hr to m/s;
1 km/hr = 0.278m/s
96km/hr = 96 x 0.278 = 26.7m/s
Now;
Acceleration = [tex]\frac{26.7 - 0}{3.07}[/tex] = 8.69m/s²
So;
v² = u² + 2as
v is the final velocity
u is the initial velocity
a is the acceleration
s is the distance
26.7² = 0² + 2 x 8.69 x s
712.89 = 17.38s
s = 41.02m
which sun's energy comes from which nuclear reaction
Answer:
the nuclear fusion process
Explanation:
:)
Answer:
nuclear fusion (not fission)
Explanation:
a p e x :))
A2 kg object moves at a constant 5 m/s across a level surface. Determine its kinetic energy.
A rectangular block weighs 240 N. the area of the block in contact with the floor is 20 cm2.calculate the pressure on the floor(give your answer in N/cm2
Help me Fast as you can,,
Answer:
12 N/cm²
Explanation:
From the question given above, the following data were obtained:
Weight (W) of block = 240 N
Area (A) = 20 cm²
Pressure (P) =?
Next, we shall determine the force exerted by the block. This can be obtained as follow:
Weight (W) of block = 240 N
Force (F) =.?
Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,
Force (F) = Weight (W) of block = 240 N
Force (F) = 240 N
Finally, we shall determine the pressure on the floor as follow:
Force (F) = 240 N
Area (A) = 20 cm²
Pressure (P) =?
P = F/A
P = 240 / 20
P = 12 N/cm²
Therefore, the pressure on the floor is 12 N/cm².
which is true about the way air flows
A. high pressure to low pressure
B. low pressure to high pressure
C. cold air to hot air
D. hot air to cold air
Answer:
A High-to-Low
Explanation:
its like water running down a hill.
Two identical plastic cups contain the same amount of water at two different temperatures, as shown to the left. Both cups are placed in a room at 25° Celsius. At the time cups were placed in the room, in which cup do the water molecules have higher average kinetic energy? ( Cup 1 © Cup 2
Answer:
the molecules will begin to move slowly and will turn to ice
Explanation:
hope this was good or not not sure if am right but yeah
A 420 g soccer ball is kicked into the air with an initial velocity of 30 m/s. How much kinetic energy does the soccer ball have?
Answer:189000J
Explanation:KE=1/2mv^2
1/2(420g)(30m/s)^2
=189000J
The least count of stopwatch is 0.2s.The time of 20 oscillations of a pendulum was measured to be 25s.Find the percentage error in the measurement of time
Answer:
0.8%
Explanation:
We are given;
Number of oscillations; n = 20
Time taken; t = 25 s
Formula for period of oscillation;
T = t/n = 25/20 = 1.25 s
We are told that the least count is 0.2 s. Thus, error is; ΔT = 0.2 s
percentage error in the measurement of time is given by;
(0.2/(20 × 1.25)) × 100% = 0.8%
Delaney loves her new kiddie pool, but she is afraid to get wet. She crawls around the outside of the pool for hours. Jocelyn says Delaney is making rotations around the pool and Jonathan says Delaney is making revolutions around the pool. Who is correct? Suppose your answer with evidence.
Answer:
Revolutions
Explanation:
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
Water is found as a solid, liquid, and gas on ____.
A man drops a ball off of a 7.2 m high cliff, what is the ball's velocity as it hits the ground?
(- 12m/s)
Proof llease
Answer:
19.3 m/s
Explanation:Take down to be positive. Given:
Δy = 19 m
v₀ = 0 m/s
a = 9.8 m/s²
Find: v
v² = v₀² + 2aΔy
v² = (0 m/s)² + 2 (9.8 m/s²) (19 m)
v = 19.3 m/s
My camera quality is bad. Sorry..
Which of the following is NOT a possible type of law that a government could pass to help fight climate change?
1. Making greenhouses gas production illegal
2. Regulating the amount of greenhouse gases businesses can produce
3. Funding research on technologies that are better for the environment than those we currently use
4. Providing tax incentives for businesses and people to take action
Answer:
4
Explanation:
because people could lie about it
A 55.0 kg student feels a
2.68 x 10-8 N gravitational force
from a Physics book 0.435 m away.
What is the mass of the Physics
book?
Mass of book will be m = 4.495 kg
What is gravitational force ?The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies near its surface is called gravitational force
Force = 2.68 x 10-8 N
mass of student(M) = 55
mass of book=?
distance = 0.435m
gravitational constant (G)=6.67×10^-11
gravitational force (F)=2.68×10^-8
gravitational force (F) = (G*M*m) /[tex]d^{2}[/tex]
2.68 x 10-8 = ((6.67×10^-11) * ( 55 ) * m) / 0.435
m = 4.495 kg
Mass of book will be m = 4.495 kg
learn more about gravitational force
https://brainly.com/question/12528243?referrer=searchResults
#SPJ2
Answer:
acellus students
Explanation
1.382
23. What mass of water will give up 240 calories
when its temperature drops from 80°C to 68°C?
Answer:
20g
Explanation:
Given parameters:
Quantity of heat = 240calories
Initial temperature = 80°C
Final temperature = 68°C
Unknown:
Mass of water = ?
Solution;
To solve this problem, we use the expression:
Q = m c (t₂ - t₁)
Q is the quantity of heat
m is the mass
c is the specific heat = 1 cal/g°C
t₂ is the final temperature
t₁ is the initial temperature
Insert the parameters and solve;
Change in temperature is an absolute value
240 = m x 1 x (68 - 80)
m = 20g
what is happening in terms of matter and energy, while wood burns?
Answer:
The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction. For example, when wood burns, the mass of the soot, ashes, and gases, equals the original mass of the charcoal and the oxygen when it first reacted. So the mass of the product equals the mass of the reactant
5. What is the area of space around a magnet called?
O Magnetic field
O Magnetic space
O Induced magnet
ILL MARK BRAINLYEST PLZ HELPPPP HURRY !!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Magnetic Field
Explanation:
Answer:
Magnetic field
Explanation:
WILL GIVE BRAINLIEST TO THE CORRECT ANSWER
PLEASE HELP THIS IS DUE TODAY!
If a 1000kg car is accelerating at 3m/s/s for 4 seconds how far will it travel
True or False: A cheetah, that has a mass of 40 kg, must exert a bigger force to change directions than a 15 kg gazelle because the cheetah has a greater mass
EX 6-1 A ball is twirled on a 0.870 - m-long string with a constant speed of 3.36 m / s . Calculate the acceleration of the ball. Be sure to specify the direction of the acceleration.
Answer:
[tex]a=12.97\ m/s^2[/tex]
Explanation:
Given that,
The length of a string, l = 0.87 m
Speed of the ball, v = 3.36 m/s
We need to find the acceleration of the ball. The acceleration acting on the ball is centripetal acceleration. It is given by :
[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(3.36)^2}{0.87}\\\\=12.97\ m/s^2[/tex]
So, the acceleration of the ball is [tex]12.97\ m/s^2[/tex].
use particle motion to explain what happens when molten steel becomes a steel beam to be used in construction.
Explanation:
A molten steel is in a liquid phase of matter. It has no defined volume of shape at this state. The particles inside this materials in this form is randomized by they are still attached to each other.
On cooling, when the molten steel solidifies and sets into a solid steel beam, the particles take up a fixed position and forms a definite shape and this confers a definite volume on them. The randomized particles stops and forms fixed crystals about their lattice. This way, the beam can carry and support a fixed amount of load.A water molecule has 2 hydrogen atoms and 1 oxygen atom. If you were to add an additional oxygen atom to the molecule, would it still be water? If not, what would it be?
Answer:
No, it would not still be water. it would be hydrogen peroxide
Explanation:
water is [tex]H_{2} O[/tex]. Adding another oxygen would make it [tex]H_{2} O_{2}[/tex], which is hydrogen peroxide
Answer:
It would be Hydrogen peroxide
Explanation:
Atoms actually prefer being configured as water (H2O). Adding on the extra oxygen takes a lot of energy (and other chemicals). That's why we see lots of water and not much hydrogen peroxide around in nature. The reason hydrogen peroxide (H2O2) is dangerous is because it actually wants to drop off that extra oxygen and become water. Anything that does this is called an oxidising agent. An oxygen atom on it's own is pretty unstable and really wants to snatch up electrons from somewhere. First it'll probably gobble up some free floating hydrogen and make some more water with it. In our bodies we don't have much free floating hydrogen, so it runs out pretty quick. The oxygen atom army then has to start breaking up bigger molecules to steal the hydrogens and sometimes even the nitrogens. This breaks up the molecules that form the structures of your body and leaves you with a jumble of random configurations of atoms where the oxygen atoms passed through. Now, before you ask, normally oxygen doesn't do it to you because it exists in the air as O2, bonded to itself. The isolated oxygen atoms only exist for a brief time after they've split up from the hydrogen peroxide.
A concave lens can be used to produce an enlarged and erect image. True or False?
Answer:
False
Explanation:
A single concave lens has the opposite effect of a magnifying glass.
Optimus Prime is flying straight up at 24 m/s when he accidentally drops his mega-ray blaster and it falls 94 m to the ground below. Calculate how long it takes for his mega-ray blaster to hit the ground.
Answer:
The time it will take the mega-ray blaster to hit the ground is 2.57 s.
Explanation:
Given;
initial velocity of Optimus Prime, u = 24 m/s
height of fall of the mega-ray blaster, h = 94 m
The time of fall of the mega-ray blaster is calculated using the following kinematic equation;
[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]
[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]
t = 2.57 s
Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.
List two examples of how the land can have a dramatic change in temperature throughout the day.
Answer:
one could freeze and the second would thaw
Explanation:
sorry if its wrong
The two examples of how land can have a dramatic change in temperature
is during freezing and thawing.
Cold temperatures which is common during the winter period is
characterized by the formation of snow and freezing of smaller water
bodies.
There may be a short phase in which there is relative sunlight which melts
the frozen substances thereby forming liquids . This is usually as result of
the temperature being on the increase in the atmosphere.
Read more on https://brainly.com/question/25671319