The mass of water collected in the train car is approximately 294 kg.
How to solve for the mass of waterThe initial momentum of the system is:
p1 = m1v1
where m1 is the mass of the train car, and v1 is its initial velocity.
The final momentum of the system is:
p2 = (m1 + m2)v2
where m2 is the mass of the rainwater collected in the train car, and v2 is the final velocity of the train car after the rain has collected.
Since there are no external forces acting on the system, we can equate p1 and p2:
m1v1 = (m1 + m2)v2
Substituting the given values:
(4700 kg)(17 m/s) = (4700 kg + m2)(16 m/s)
Solving for m2:
m2 = (4700 kg)(17 m/s - 16 m/s) / (16 m/s)
m2 = 4700 kg / 16
m2 = 293.75 kg
Therefore, the mass of water collected in the train car is approximately 294 kg.
Read more on mass here:https://brainly.com/question/86444
#SPJ1
A 950-kg sports car accelerates from rest to 95 km/h in 6.0 s. What is the average power delivered by the engine?
The average power delivered by the engine is 20,708 watts.
To calculate the average power, follow these steps:
1. Convert 95 km/h to meters per second (m/s): 95 km/h * (1000 m/km) / (3600 s/h) = 26.39 m/s.
2. Calculate the car's final kinetic energy (KE) using the formula KE = 0.5 * mass * velocity²: 0.5 * 950 kg * (26.39 m/s)^2 = 330,322.95 J.
3. Since the car starts from rest, the initial KE is 0 J.
4. Calculate the change in kinetic energy: Final KE - Initial KE = 330,322.95 J - 0 J = 330,322.95 J.
5. Calculate the average power using the formula: Power = Change in KE / time: 330,322.95 J / 6.0 s = 20,708.33 W, which can be rounded to 20,708 watts.
To know more about average power click on below link:
https://brainly.com/question/30888338#
#SPJ11
A 0.5 m x 0.5 m plate is inclined at a 30º angle. The top surface of the plate is well insulated. The bottom surface is maintained at 60ºC. The ambient air is at 0ºC. What is the film temperature (ºC)? Do not include the unit as it is assumed to be ºC. Calculate the Rayleigh number. Use scientific notation where 1 x 106 would be entered as 1.0 x 10^6. Calculate the Nusselt number. Calculate the convection heat transfer coefficient (W/m2-K). Do not include the units in your answer which are assumed to be W/m2-K. Calculate the rate of heat loss (W) from the plate. Do not include the unit which is assumed to be W.
The film temperature is 30ºC. The Rayleigh number is 4.4 x 10^9. The Nusselt number is 32. The convection heat transfer coefficient is 16.08. The rate of heat loss from the plate is 1283.6.
The film temperature is the average temperature of the plate's top surface, assuming that the convective heat transfer is uniform. In this case, the film temperature is equal to the average of the bottom surface temperature (60ºC) and the ambient temperature (0ºC), which is 30ºC.
The Rayleigh number is a dimensionless number that describes the ratio of buoyancy forces to viscous forces in a fluid.
It is given by Ra = gβΔTL^3/να, where g is the acceleration due to gravity, β is the coefficient of thermal expansion, ΔT is the temperature difference, L is the characteristic length scale (in this case, the thickness of the plate), ν is the kinematic viscosity of air, and α is the thermal diffusivity of air.
Plugging in the given values, the Rayleigh number is 4.4 x 10^9.
The Nusselt number is a dimensionless number that relates the convective heat transfer coefficient to the thermal conductivity of the fluid. It is given by Nu = hL/k, where h is the convective heat transfer coefficient and k is the thermal conductivity of air.
Using the empirical correlation for natural convection over a vertical plate, the Nusselt number can be approximated as Nu = 0.59Ra^(1/4). Plugging in the calculated Rayleigh number, the Nusselt number is 32.
The convection heat transfer coefficient is the proportionality constant between the heat transfer rate and the temperature difference between the plate and the surrounding fluid. It is given by h = kNu/L. Plugging in the given values, the convection heat transfer coefficient is 16.08.
The rate of heat loss from the plate is the product of the convective heat transfer coefficient, the plate's surface area, and the temperature difference between the plate and the surrounding fluid.
It is given by Q = hA(θ-τ), where A is the surface area, θ is the plate temperature, and τ is the surrounding fluid temperature. Plugging in the given values, the rate of heat loss from the plate is 1283.6.
For more questions like Temperature click the link below:
https://brainly.com/question/11464844
#SPJ11
A Normalize this wave function. What is the (positive) value of C once this wave function is normalized? You will need the formula se eres? = V -az? Express your answer in terms of w, m, n, and . View Available Hint(s) 190 AED ? CE Submi
Normalizing a wave function and finding the value of the constant C. The wave function you provided is not clear, but I can still guide you through the process.
To normalize a wave function, you need to ensure that the integral of the wave function's magnitude squared over all space is equal to 1. The formula for normalization is:
∫ |Ψ(x)|^2 dx = 1
Here, Ψ(x) represents the wave function, and |Ψ(x)|^2 represents the square of the wave function's magnitude. To find the positive value of C, you would need to:
1. Multiply the wave function by its complex conjugate: C*Ψ(x)*CΨ*(x), where Ψ*(x) is the complex conjugate of Ψ(x).
2. Integrate the result over all space.
3. Set the integral equal to 1 and solve for C.
once you have the wave function, you can follow these steps to find the value of C in terms of the given variables.
To learn more about magnitude click here
brainly.com/question/30395926
#SPJ11
calculate the resistance of a 40w automobile headlight designed for 12v
The resistance of the 40W automobile headlight designed for 12V is approximately 3.6 ohms.
Explanation:
To calculate the resistance of a 40W automobile headlight designed for 12V, we will use Ohm's Law and the formula for power.
Step 1: Recall the formula for power: P = IV, where P is power, I is current, and V is voltage.
Step 2: Rearrange the formula to solve for current (I): I = P / V
Step 3: Plug in the given values for power (40W) and voltage (12V): I = 40W / 12V
Step 4: Calculate the current: I = 3.33A
Step 5: Recall Ohm's Law: V = IR, where V is voltage, I is current, and R is resistance.
Step 6: Rearrange the formula to solve for resistance (R): R = V / I
Step 7: Plug in the given values for voltage (12V) and the calculated current (3.33A): R = 12V / 3.33A
Step 8: Calculate the resistance: R = 3.6Ω
The resistance of the 40W automobile headlight designed for 12V is approximately 3.6 ohms.
To know more about resistance visit:
https://brainly.com/question/30799966
#SPJ11
The potential energy of a pair of hydrogen atoms separated by a large distance x is given by 6 ( ) C U x x where C is a constant. What is the force that one atom exerts on the other? Is this force attractive or repulsive?
The potential energy of a pair of hydrogen atoms separated by a large distance x is given by 6Cx⁻² where C is a constant. The force that one atom exerts on the other is 6Cx⁻², and this force is always attractive.
The force between two hydrogen atoms can be obtained by taking the negative gradient of the potential energy function with respect to the distance between them (x):
F = -dU/dx
To find the derivative of U(x) with respect to x, we need to use the power rule:
dU/dx = -6Cx⁻²
Substituting this back into the expression for force, we get:
F = -(-6Cx⁻²) = 6Cx⁻²
So the force between the two hydrogen atoms is 6Cx⁻², and this force is always attractive, as the potential energy decreases as the distance between the atoms decreases.
Learn more about potential energy here:
https://brainly.com/question/14427111
#SPJ11
suppose that you wish to construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 −m -focal-length objective lens whose diameter is 13.0 cm .
To construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 m focal-length objective lens whose diameter is 13.0 cm , we would need a magnification of approximately 81.5x.
To calculate the required angular resolution of the telescope, we can use the formula:
θ = 1.22 λ/D
Where θ is the angular resolution, λ is the wavelength of light (we'll assume a value of 550 nm for green light), and D is the diameter of the objective lens.
θ = 1.22 (550 nm) / (13 cm) = 0.000303 radians
Next, we can calculate the angular size of the features on the moon:
θ = size / distance
where size is the size of the feature we want to resolve (9.5 km) and distance is the distance to the moon (384,000 km).
θ = (9.5 km) / (384,000 km)
= 0.0000247 radians
Finally, we can calculate the magnification required to achieve the desired resolution:
Magnification = angular size of the feature / angular resolution of the telescope
Magnification = 0.0000247 radians / 0.000303 radians = 81.5
Therefore, we would need a magnification of approximately 81.5x to resolve features 9.5 km across on the moon using a 3.8 m focal length objective lens with a diameter of 13 cm.
Learn more about focal length here:
https://brainly.com/question/28039799
#SPJ11
To construct a telescope that can resolve features 9.5 km across on the moon, 384,000 km away. you have a 3.8 m focal-length objective lens whose diameter is 13.0 cm , we would need a magnification of approximately 81.5x.
To calculate the required angular resolution of the telescope, we can use the formula:
θ = 1.22 λ/D
Where θ is the angular resolution, λ is the wavelength of light (we'll assume a value of 550 nm for green light), and D is the diameter of the objective lens.
θ = 1.22 (550 nm) / (13 cm) = 0.000303 radians
Next, we can calculate the angular size of the features on the moon:
θ = size / distance
where size is the size of the feature we want to resolve (9.5 km) and distance is the distance to the moon (384,000 km).
θ = (9.5 km) / (384,000 km)
= 0.0000247 radians
Finally, we can calculate the magnification required to achieve the desired resolution:
Magnification = angular size of the feature / angular resolution of the telescope
Magnification = 0.0000247 radians / 0.000303 radians = 81.5
Therefore, we would need a magnification of approximately 81.5x to resolve features 9.5 km across on the moon using a 3.8 m focal length objective lens with a diameter of 13 cm.
Learn more about focal length here:
https://brainly.com/question/28039799
#SPJ11
a ball is thrown at an angle of 45° to the ground. if the ball lands 81 m away, what was the initial speed of the ball? (round your answer to the nearest whole number. use g ≈ 9.8 m/s2.) v0 = m/s
The initial speed of the ball was approximately 39 m/s
We can use the kinematic equations of motion to solve for the initial speed of the ball. Since the ball is thrown at an angle of 45° to the ground, we know that its initial vertical velocity is equal to its initial horizontal velocity. We can use this fact to break down the initial velocity vector into its horizontal and vertical components.
Let's use the following variables:
v0: initial speed of the ball
θ: angle of the ball's initial velocity (45° in this case)
d: distance the ball travels (81 m in this case)
g: acceleration due to gravity (9.8 m/s^2)
Using the kinematic equation for the horizontal distance traveled by an object, we have:
[tex]d = v0*cos(θ)*t[/tex]
where t is the time it takes for the ball to travel the distance d. Since the ball is thrown at 45°, we have:
[tex]cos(45°) = √2/2[/tex]
Substituting this into the equation above, we get:
d = v0*(√2/2)*t
Using the kinematic equation for the vertical displacement of an object, we have:
[tex]y = v0*sin(θ)*t - (1/2)gt^2[/tex]
where y is the maximum height reached by the ball. Since the ball is thrown at 45°, we have:
sin(45°) = √2/2
Substituting this into the equation above, we get:
y = (v0*√2/2)[tex]*t - (1/2)gt^2[/tex]
Since the ball is thrown at an angle of 45°, the time it takes for the ball to reach its maximum height is equal to half the total time of flight. Therefore, we can express t in terms of d and v0 as:
t = d / (v0*cos(θ))
Substituting this expression for t into the equation for y, we get:
y = (v0√2/2)(d / (v0cos(θ))) - (1/2)g(d / (v0cos(θ)))[tex]^2[/tex]
Simplifying, we get:
y = (dsin(θ)√2)/(2cos[tex]^2(θ)) - (gd^2)/(2v0^2cos^2[/tex](θ))
Since we want to find v0, we can rearrange this equation to isolate v0:
v0 = √((gd[tex]^2)/(2ycos^2(θ)) - (d^2)/(4cos^4([/tex]θ)))
Plugging in the given values, we get:
v0 = √((9.8 m/[tex]s^2)(81 m)^2 / (2(0 m)(cos^2(45°))) - (81 m)^2 / (4(cos^4([/tex]45°))))
v0 ≈ 39 m/s
Therefore, the initial speed of the ball was approximately 39 m/s.
To know more about speed here
https://brainly.com/question/13943409
#SPJ4
which one of the following compounds would exhibit seven signals in its 13c nmr spectrum? group of answer choices v iii iv i ii
To determine which compound would exhibit seven signals in its 13C NMR spectrum, we need to evaluate the number of unique carbon environments in each compound. Unique carbon environments are carbons that are not equivalent due to their connectivity or other factors.
Unfortunately, the specific compounds (i.e., v, iii, iv, i, ii) have not been provided. To help you further, please provide the structures or formulas of the compounds labeled as v, iii, iv, i, and ii.
The compound that would exhibit seven signals in its 13C NMR spectrum is compound IV.
Learn more about environments here:
https://brainly.com/question/29885760
#SPJ11
Problem 1: A rock with mass m = 1 kg is submerging with constant acceleration at = 1.8 m/s2 into the level earth. The free-fall acceleration is g = 9.81 m/s2. Please answer the following questions. Otheexpertta.com Part (a) Write an expression for the magnitude of the force of gravity on the rock, Fg, in terms of the given quantities and variables available in the palette. Expression : F = Select from the variables below to write your expression. Note that all variables may not be required. a, b, , o, 0, at, d, FN, g, h, j, k, m, P, t Part (b) Calculate the magnitude of the force of gravity on the rock, Fin Newtons. Numeric : A numeric value is expected and not an expression. Fg== Part (c) In what direction does the force of gravity act? Multiple Choice : 1) Sideways. 2) Upwards. 3) Force doesn't have direction. 4) Downwards. 5) None of these choices. 6) All of these choices. Part (d) Write an expression for the magnitude of the total force of the system in the y-direction, Ft, in terms of the forces of the system. Expression : FT= Select from the variables below to write your expression. Note that all variables may not be required. a, b, c, o, 0, at, d, F, FN, g, h, j, m, P, t Part (e) Write an expression for the magnitude of the normal force Fn, in terms of m, at, and g. Expression : FN= Select from the variables below to write your expression. Note that all variables may not be required. a, b, n, , 0, at, d, FN, g, h, j, k, m, P, t Part (1) What is the magnitude of the normal force in N? Numeric : A numeric value is expected and not an expression. Fn = Part (g) In what direction is the normal force? Multiple Choice : 1) Sideways. 2) Downwards. 3) Force does not have direction. 4) Upwards. 5) None of these choices 6) All of these choices.
Part (a) A rock with mass m = 1 kg is submerging with constant acceleration at the formula for the force magnitude of gravity acting on the rock is F = m x g (standard formula).
Part (b) : Calculate the magnitude of the force of gravity on the rock, Newtons. Numeric: A numeric value is expected and not an expression.
F == Part:
Here, m = 1 kg and g= a = 9.81 [tex]m/s^2[/tex](standard value of g)
F = m*g = 1 kg * 9.81 [tex]m/s^2[/tex]
= 9.81 N
Numeric: F = 9.81 N
Part (c): Option 4 is Correct. Because gravity pulls downward.
Part (d) The total force of the system in the y-direction, Ft, may be written down as follows: Ft = Fg - m * at while the rock is submerged with a constant acceleration.
So, here we need the Expression:
[tex]F_t = F_g + F_N\\F_t = m*g + F_N[/tex]
Part (e) The formula for the normal force Fn's magnitude is Fn = m * (g - at).
So, here we need the Expression:
[tex]F_N = m*(at + g)\\F_N = m*(at + g)[/tex]
where m is the mass of the object, at is the acceleration of the object in the y-direction, and g is the acceleration due to gravity.
Part (f) When we change the values, we obtain:
Here, m = 1 kg
at = 1.8 [tex]m/s^2[/tex]
g = 9.81 [tex]m/s^2[/tex]
[tex]F_N = m*(at + g) \\= 1 kg * (1.8 m/s^2 + 9.81 m/s^2) \\= 11.61 N[/tex]
Numeric: [tex]F_N[/tex] = 11.61 N
7.01 N is equal to [tex]F_N[/tex] = [tex]1 kg * (9.81 m/s^2 - 1.8 m/s^2)[/tex]
Part (g): Option 4 is Correct. In direction is the normal force: Upwards is the correct option.
Upwards, since the typical force moves upward.
Learn more about magnitude visit: brainly.com/question/30337362
#SPJ4
Using what you know about the compressibility of different states of matter explain why
a) air is used to inflate tyres
b) steel is used to make railway lines
Answer:
Explanation:
a) Air is highly compressible. As it has pressure it can also handle atm (Atmosphere) pressure. It makes the drving smooth and gives the required friction for driving. Also it is very easily available.
b) Steel is free from rust and it has high tensile strength. It has the resistence to internal and external cracks.
if a current of 50 ma exists for 1.4 min, how many coulombs of charge have passed through the wire?
To find the total charge that has passed through the wire, we can use the formula Q = I x t, where Q is the charge in coulombs, I is the current in amperes, and t is the time in seconds.
First, we need to convert the current from milliamperes to amperes by dividing by 1000:
50 mA = 0.05 A
Next, we need to convert the time from minutes to seconds by multiplying by 60:
1.4 min = 84 s
Now we can plug in the values and solve for Q:
Q = 0.05 A x 84 s
Q = 4.2 C
Therefore, 4.2 coulombs of charge have passed through the wire.
Learn more about current here:
https://brainly.com/question/31297138
#SPJ11
3. what is the spring constant? k = 0.49 incorrect: your answer is incorrect. n/cm 4. what is the force of the spring
The force of the spring is 1.6 meters. To determine the force of the spring, you would need to know the spring constant (k) and the displacement (x) of the spring from its equilibrium position.
The spring constant (k) represents the stiffness of a spring and is measured in units of force per unit length, such as N/m or N/cm. It describes the relationship between the force exerted on the spring (F) and its displacement (x) according to Hooke's Law: F = kx.
F = force exerted on the spring (N) where Kx
K = spring constant (3 kg/s2), and x = spring extension (m).
But force applied by an object is equal to mass times acceleration (9.8 m/s2).
F = 0.49kg × 9.8m/s²
F = 4.802N
Given that F = 4.802N
F = Kx 4.802 = 3 x 4.802/3 x = 1.6006 x = 1.6 m
The spring is stretched by 1.6 meters, or its extent.
Once you have both of these values, you can use the formula F = kx to calculate the force of the spring.
Learn more about Hooke's Law here
https://brainly.com/question/29126957
#SPJ11
the decay constant of radon-222 is 0.181 d-1. if a sample of radon initially contains 6.00 × 108 radon atoms, how many of them are left after 10.0 d?
9.82 × 107
7.67 × 107
8.34 × 108
7.29 × 108
8.56 × 108
The decay constant of radon-222 is 0.181 d-1. if a sample of radon initially contains 6.00 × 10⁸ radon atoms, 9.82 × 10⁷ are left after 10.0 d
The decay of radon-222 follows first-order kinetics, which means that the rate of decay is proportional to the amount of radon present. The mathematical expression for the decay of radon-222 can be written as:
N(t) = N₀e^(-λt)
where N(t) is the number of radon atoms remaining after time t, N₀ is the initial number of radon atoms, λ is the decay constant, and e is the base of the natural logarithm.
To solve the problem, we need to use the above equation and plug in the given values:
N₀ = 6.00 × 10⁸ radon atoms
λ = 0.181 d⁻¹
t = 10.0 d
So, the equation becomes:
N(10.0) = 6.00 × 10⁸ e^(-0.181 × 10.0)
N(10.0) = 6.00 × 10^8 e^-1.81
N(10.0) = 6.00 × 10⁸ × 0.1631
N(10.0) = 9.82 × 10⁷
Therefore, the number of radon atoms remaining after 10.0 days is approximately 9.82 × 10⁷.
To know more about decay constant here:
https://brainly.com/question/16623902#
#SPJ11
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of uniform electric field. what is the electric field strength?
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of the uniform electric field. The electric field strength is 3298 N/C.
The energy density u of an electric field is given by:
u = (1/2)εE²
where ε is the permittivity of free space and E is the electric field strength.
The energy stored in a region of the electric field is given by:
U = uV
where V is the volume of the region.
In this problem, we are given the energy U and the dimensions of the region, so we can calculate the volume V:
V = (3.00 cm)³ = 27.0 cm³ = 27.0 × 10⁻⁶m³
We are also given that the energy density is uniform, so the electric field strength E is the same throughout the region. Therefore, we can rearrange the equation for energy density to solve for E:
E = √(2U/εV)
Substituting the values given in the problem, we get:
E = √(2(40.0 × 10^-12 J)/(8.85 × 10^-12 C^2/N·m^2)(27.0 × 10^-6 m^3))
E = √(1.086 × 10^7 N/C^2) = 3298 N/C
Therefore, the electric field strength is approximately 3298 N/C.
Learn more about electric field here:
https://brainly.com/question/19878202
#SPJ11
40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of the uniform electric field. The electric field strength is 3298 N/C.
The energy density u of an electric field is given by:
u = (1/2)εE²
where ε is the permittivity of free space and E is the electric field strength.
The energy stored in a region of the electric field is given by:
U = uV
where V is the volume of the region.
In this problem, we are given the energy U and the dimensions of the region, so we can calculate the volume V:
V = (3.00 cm)³ = 27.0 cm³ = 27.0 × 10⁻⁶m³
We are also given that the energy density is uniform, so the electric field strength E is the same throughout the region. Therefore, we can rearrange the equation for energy density to solve for E:
E = √(2U/εV)
Substituting the values given in the problem, we get:
E = √(2(40.0 × 10^-12 J)/(8.85 × 10^-12 C^2/N·m^2)(27.0 × 10^-6 m^3))
E = √(1.086 × 10^7 N/C^2) = 3298 N/C
Therefore, the electric field strength is approximately 3298 N/C.
Learn more about electric field here:
https://brainly.com/question/19878202
#SPJ11
The graph below shows the time and position of a motorcycle as it travels through several photogates. Calculate the velocity of the motorcycle as it moves from gate C to gate D.
C. 0.5 m/s. From the graph, the change in position within 2 seconds from gate C to gate D is 1 m. Then, the velocity of the motorcycle is 0.5 m/s. Hence, option C is correct.
What is position - time graph ?Position - time graph of an item describes the change in position with regard to time. The time is given in the x-axis, while the position is given in the y-axis. The position-time graph can be used to determine the object's velocity. The ratio of a moving object's distance travelled to its travel time is its velocity. The velocity unit is m/s. Being a vector quantity with magnitude and direction, velocity has both.
From the graph, the time taken by the motor cycle is 2 seconds. The distance travelled from C to D is 1 m (7 m to 8 m).
velocity = distance/ time
v = 1 m/ 2 s
= 0.5 m/s.
To know more about the position -time graph visit:
https://brainly.com/question/29084676
#SPJ1
Write a differential equation that models the given situation. The stated rate of change is with respect to time t. (Use k for the proportionality constant.) For a car with maximum velocity M, the rate of change of the velocity v of the car is proportional to the difference between M and v. dv/dt=?
dv/dt = k is the differential equation that describes the situation as it is (M - v)
How can you tell if a function is a certain differential equation's solution?The same procedure as before is used to assess whether a function is a solution to a certain differential equation: we evaluate the left and right sides of the d.e. and compare the results to check if they are equal.
What is a differential equation solution?An expression for the dependent variable in terms of one or more independent variables that satisfy the relationship is the differential equation's solution. The generic solution often contains arbitrary constants or arbitrary functions and encompasses all potential solutions.
To know more about differential equation visit:-
https://brainly.com/question/30896158
#SPJ1
An artificial satellite circling the Earth completes each orbit in 134 minutes. (The radius of the Earth is 6.38 10^6 m. The mass of the Earth is 5.98 10^24 kg.)
a) find the altitude of satellite. b) what is the value of g at the location of this satellite?
The altitude of the satellite is approximately 20,200 km.
The altitude of the satellite can be calculated using the following formula:
T = 2π√(r³/GM)
where T is the period of the orbit, r is the distance from the center of the Earth to the satellite, G is the gravitational constant, and M is the mass of the Earth.
We are given T = 134 minutes = 8040 seconds,
G = 6.6743 ×[tex]10^-^1^1 m^3 kg^-^1 s^-^2[/tex], and M = 5.98 × [tex]10^2^4[/tex]kg. We can solve for r as follows:
r = (GMT²/4π²)(GMT²/4π²[tex]^[/tex][tex])^(^1^/^3^)[/tex]
r = [(6.6743 × [tex]10^-^1^1[/tex]× 5.98 × [tex]10^2^4[/tex]× [tex](8040)^2)[/tex]/(4π²[tex])]^(^1^/^3^)[/tex]
r ≈ 2.66 × 1[tex]10^7[/tex]m
The altitude of the satellite is the distance from the center of the Earth to the satellite minus the radius of the Earth:
altitude = r - 6.38 × [tex]10^6[/tex] m
altitude ≈ 2.02 × [tex]10^7[/tex]m
Therefore, the altitude of the satellite is approximately 20,200 km.
b) The value of g at the location of the satellite can be calculated using the formula:
g =[tex]GM/r^2[/tex]
where G and M are the gravitational constant and mass of the Earth, respectively, and r is the distance from the center of the Earth to the satellite.
Therefore, the altitude of the satellite is approximately 20,200 km and r is the distance from the center of the Earth to the satellite.
To know more about satellite refer here :
https://brainly.com/question/2522613
#SPJ11
37.•• an object has a weight of 8.0 n in air. however, it apparently weighs only 4.0 n when it is completely submerged in water. what is the density of the object?
The density of an object has a weight of 8.0 N in air and an apparent weight of 4.0 N when submerged in water is 2000 kg/m³.
To determine the density of an object with a weight of 8.0 N in air and an apparent weight of 4.0 N when submerged in water, you'll need to use Archimedes' principle and the formula for density.
First, calculate the buoyant force (which is equal to the loss of weight in water):
Buoyant force = Weight in air - Apparent weight in water
= 8.0 N - 4.0 N
= 4.0 N
Next, calculate the volume of displaced water using the buoyant force and the density of water (1000 kg/m³):
Volume = Buoyant force / (density of water × gravity)
= 4.0 N / (1000 kg/m³ × 9.81 m/s²)
≈ 0.000408 m³
Now, find the mass of the object using its weight and gravity:
Mass = Weight / gravity
= 8.0 N / 9.81 m/s²
≈ 0.815 kg
Finally, determine the density of the object using the mass and the volume:
Density = Mass / Volume
≈ 0.815 kg / 0.000408 m³
≈ 2000 kg/m³
So, the density of the object is approximately 2000 kg/m³.
Learn more about density: https://brainly.com/question/29775886
#SPJ11
A turbine blade rotates with angular velocity w(t) = 5.00 rad/s - 1.20 rad/s^3 t^2. What is the angular acceleration of the blade at t = 7 s? a. 10.1 rad/s^2 b. -20.2 rad/s^2 c. 23.5 rad/s^2 d. -16.8 rad/s^2 e. 13.4 rad/s^2
The angular acceleration of the blade at t = 7 s is -16.8 rad[tex]/s^2[/tex], which is option (d).
The given angular velocity of the blade is:
w(t) = 5.00 rad/s - 1.20 [tex]rad/s^3 t^2[/tex]
To find the angular acceleration of the blade, we need to differentiate the angular velocity with respect to time:
[tex]a(t) = dw(t)/dt = d/dt (5.00 rad/s - 1.20 rad/s^3 t^2)= - 2.40 rad/s^3 t[/tex]
Now, we can substitute t = 7 s into the expression for angular acceleration:
[tex]a(7) = -2.40 rad/s^3 (7)\\= -16.8 rad/s^2[/tex]
Therefore, the angular acceleration of the blade at t = 7 s is -16.8 r[tex]ad/s^2,[/tex]which is option (d).
learn more about velocity here:
https://brainly.com/question/31475519
#SPJ4
a certain fuse "blows" if the current in it exceeds 1.0 A, at which instant the fuse melts with a current density of 600 A/ cm^2. What is the diameter of the wire in the fuse?
a certain fuse "blows" if the current in it exceeds 1.0 A, at which instant the fuse melts with a current density of 600 A/ cm^2. The diameter of the wire in the fuse is approximately 0.0316 cm or 0.316 mm.
To find the diameter of the wire in the fuse, we can use the formula for current density:[tex]J = I / (pi * r^2)[/tex]
where J is the current density, I is the current, and r is the radius of the wire. We know that the current density when the fuse blows is 600 A/cm^2 and the maximum current is 1.0 A. So we can rearrange the formula and solve for [tex]r: r = sqrt(I / (pi * J))[/tex]
Substituting the values, we get:[tex]r = sqrt(1.0 A / (pi * 600 A/cm^2)) = 0.005 cm[/tex]
Finally, we can convert the radius to diameter by multiplying by 2:
diameter[tex]= 2 * r = 0.010 cm = 0.0316[/tex] cm or 0.316 mm (approx.)
learn more about current here:
https://brainly.com/question/12249228
#SPJ11
A 300 g block on a 50.0 cm -long string swings in a circle on a horizontal, frictionless table at 60.0 rpm What is the speed of the block? What is the tension in the string?
The speed of the block is π m/s, and the tension in the string is 2.35 N.
How we can string swings in a circle on a horizontal?we can use the equation for the centripetal force on a object moving in a circle:
F_c = (mv²)/r
where F_c is the centripetal force, m is the mass of the object, v is its velocity, and r is the radius of the circle.
In this case, the only force acting on the block is the tension in the string, so we have:
F_t = F_c = (mv²)/r
where F_t is the tension in the string.
To find the speed of the block, we can use the equation for the circumference of a circle:
C = 2πr
where C is the circumference and r is the radius. We know that the block travels around the circle once every second (since it is moving at 60 rpm), so its velocity is:
v = C/T = 2πr/T
where T is the time for one revolution. Since T = 1 s, we have:
v = 2π(0.5 m) = π m/s
To find the tension in the string, we can substitute our expression for v into our equation for F_t:
F_t = (mv²)/r = (0.3 kg)(π m/s)²/(0.5 m) = 2.35 N
Learn more about block string
brainly.com/question/30623237
#SPJ11
The speed-time graph of a car is shown in the figure, which of the following statement is true: (figure shown in attachment)
• Car has an acceleration of 1.5 ms-2
• Car has constant speed of 7.5 ms-1
• Distance travelled by the car is 75 m
• Average speed of the car is 15 ms-1
In the speed-time graph of a car in the figure, the correct statement is, the distance traveled by car is 75 m. Thus, option C is correct.
Speed is the distance traveled by an object per unit of time. In the graph, speed is taken in the Y axis, and time in the X axis. In the speed-time graph, the acceleration of an object and the distance traveled by an object can be determined. In the speed-time graph, the acceleration is obtained by taking the slope. From the figure, the speed of the car decreases, and it is called deceleration. If the car has a constant speed, the graph has a line parallel to the X-axis.
The distance traveled by car is obtained by determining the area of the figure. The area of the figure is a triangle.
Distance = Area of the triangle = 1/2 (base×height)
= (15×10) /2
= 75m
The distance traveled by car is 75m. The ideal solution is C.
To learn more about the speed-time graph:
https://brainly.com/question/17261628
#SPJ1
an airplane has to land at a destination 300 km northeast with a wind blowing at 40 km/h due south. if the airspeed of the plane is 180 km/h, what is the required heading of the plane?
To calculate the required heading of the plane, we need to use vector addition. The velocity of the plane relative to the ground can be found by adding the velocity of the plane relative to the air (airspeed) to the velocity of the wind relative to the ground.
First, we need to find the velocity of the wind relative to the plane. We can do this by subtracting the velocity of the wind due south (40 km/h) from the velocity of the plane due northeast (180 km/h).
Using the Pythagorean theorem, we can find the magnitude of the velocity of the plane relative to the ground:
(180 km/h)^2 + (40 km/h)^2 = 33800
√33800 = 183.7 km/h
Now we can use trigonometry to find the angle between the velocity of the plane relative to the ground and the direction of the destination (northeast).
tan θ = opposite/adjacent = 300 km/183.7 km/h
θ = tan^-1 (300/183.7) = 59.8°
Therefore, the required heading of the plane is 59.8° northeast.
To find the required heading of the plane, we need to consider the wind and the airspeed of the plane. Since the wind is blowing due south at 40 km/h and the plane's airspeed is 180 km/h, we can use vector addition to find the ground speed vector of the plane.
Let's represent the plane's airspeed vector as A and the wind's vector as W. The ground speed vector, G, can be represented as G = A + W. The plane needs to travel 300 km northeast, so we'll need to adjust the plane's airspeed vector accordingly.
Given the wind vector W = [0, -40] (0 in the east-west direction and -40 in the north-south direction) and the desired ground speed vector G = [300/sqrt(2), 300/sqrt(2)] (since it's traveling northeast).
Now, we'll find the airspeed vector A:
A = G - W
A = [300/sqrt(2), 300/sqrt(2) + 40]
Now, to find the required heading of the plane, we need to calculate the angle with respect to the east direction:
angle = arctan(A_y/A_x)
angle = arctan((300/sqrt(2) + 40)/(300/sqrt(2)))
Use a calculator to find the angle value. This will give you the required heading of the plane to reach its destination 300 km northeast considering the wind and airspeed.
Visit here to learn more about magnitude brainly.com/question/14452091
#SPJ11
You are spinning two identical balls attached to strings in uniform circular motion, Ball 2 has a string that is twice as long as the string with ball 1, and the rotational speed (v) of ball 2 is three times the rotational speed of ball 1. What is the ratio of the centripetal force of ball 2 to that of ball 1?
The ratio of the centripetal force of ball 2 to that of ball 1 is 9:2.
To find the ratio of the centripetal force of ball 2 to that of ball 1, let's first look at the formula for centripetal force:
[tex]F_c = m * v^2 / r[/tex]
where [tex]F_c[/tex] is the centripetal force, m is the mass of the ball, v is the rotational speed, and r is the radius (or length of the string).
Given that ball 2 has a string that is twice as long as ball 1, we can represent the radii as:
[tex]r_1[/tex] = r (for ball 1)
[tex]r_2[/tex] = 2r (for ball 2)
Also, the rotational speed of ball 2 is three times the rotational speed of ball 1, so we have:
[tex]v_1[/tex] = v (for ball 1)
[tex]v_2[/tex] = 3v (for ball 2)
Now, we can substitute these values into the centripetal force formula for each ball:
[tex]F_{c1} = m * v^2 / r\\F_{c2} = m * (3v)^2 / (2r)[/tex]
Now, we need to find the ratio of [tex]F_{c2}[/tex] to [tex]F_{c1}[/tex]:
[tex]F_{c2} / F_{c1} = (m * (3v)^2 / (2r)) / (m * v^2 / r)[/tex]
The mass (m) and the speed squared (v²) terms will cancel out:
[tex]F_{c2} / F_{c1} = ((3^2) / 2)\\F_{c2} / F_{c1} = (9 / 2)[/tex]
Learn more about centripetal force:
https://brainly.com/question/20905151
#SPJ11
what work is done by the electric force when the charge moves a distance of 0.720 mm upward?
Work DONE BY Electric force
W = Fd = Eqd
To calculate the work done by the electric force when a charge moves a distance of 0.720 mm upward, we need to use the formula W = Fd, where W is the work done, F is the electric force, and d is the distance moved.
Assuming the charge is moving in a uniform electric field, we can use the formula F = Eq, where E is the electric field strength and q is the charge of the particle.
So, we have W = Fd = Eqd and d = 0.720 mm. Substituting these values into the work formula, we get:
W = Fd = Eqd
To solve for W, we need to know the values of E and q. If these are not given in the problem, we cannot solve for W.
However, we can say that the work done by the electric force depends on the magnitude of the charge and the strength of the electric field.
If the charge is positive and moves in the direction of the electric field, the electric force will do positive work (i.e. the force and displacement are in the same direction).
If the charge is negative and moves opposite to the electric field, the electric force will do negative work (i.e. the force and displacement are in opposite directions).
For more information on work by electric forcehttps://brainly.com/question/25923373
#SPJ11
how frequently would you expect a 8-bp sequence
The frequency of an 8-bp sequence would depend on the particular DNA sequence being considered.
Assuming that the DNA sequence is random and evenly distributed, we can use the formula for the probability of finding a specific sequence of n nucleotides in a DNA sequence of length N:
[tex]P = (1/4)^n[/tex]
where 1/4 is the probability of finding any particular nucleotide (A, C, G, or T) and n is the length of the sequence.
For an 8-bp sequence, n = 8, so the probability of finding a specific 8-bp sequence in a DNA sequence of any length is:
P = [tex](1/4)^8 = 1/65,536 ≈ 1.5 × 10^-5[/tex]
This means that we would expect to find a specific 8-bp sequence once every 65,536 base pairs on average in a random DNA sequence. However, it's important to note that actual frequencies can vary depending on the DNA sequence being considered, since some sequences may be more common or rare than others due to factors like selective pressure, mutation rates, and DNA replication dynamics.
To learn more about Gamma rays here
https://brainly.com/question/22166705
#SPJ4
a 5.7 g coin sliding to the right at 25.6 cm/s makes an elastic head-on collision with a 17.1 g coin that is initially at rest. after the collision, the 5.7 g coin moves to the left at 12.8 cm/s.a) Find the final velocity of the other coin.
b) Find the amount of kinetic energy transferred to the 17.1 g coin.
The final velocity of the 17.1 g coin is 8.53 cm/s and the amount of kinetic energy= 1428 erg
How we can find the amount of kinetic energy transferred?To solve for the final velocity of the 17.1 g coin, we can use the principle of conservation of momentum, which states that the total momentum of a system before a collision is equal to the total momentum of the system after the collision. In this case, we have:m1v1i + m2v2i = m1v1f + m2v2f
where m1 and v1i are the mass and initial velocity, respectively, of the 5.7 g coin, m2 and v2i are the mass and initial velocity, respectively, of the 17.1 g coin, and v1f and v2f are the final velocities of the two coins.
Substituting the given values, we get:
(5.7 g)(25.6 cm/s) + (17.1 g)(0 cm/s) = (5.7 g)(-12.8 cm/s) + (17.1 g)(v2f)
Solving for v2f, we get:
v2f = [(5.7 g)(25.6 cm/s) + (5.7 g)(-12.8 cm/s)] / (17.1 g)
= 8.53 cm/s
Therefore, the final velocity of the 17.1 g coin is 8.53 cm/s to the right.
To solve for the amount of kinetic energy transferred to the 17.1 g coin, we can use the equation:KE = (1/2)mv²
where KE is the kinetic energy, m is the mass, and v is the velocity.
The initial kinetic energy of the system is:
KEi = (1/2)(5.7 g)(25.6 cm/s)² + (1/2)(17.1 g)(0 cm/s)²
= 1850.88 erg
The final kinetic energy of the system is:
KEf = (1/2)(5.7 g)(-12.8 cm/s)² + (1/2)(17.1 g)(8.53 cm/s)²
= 422.88 erg
KE transferred = KEi - KEf
= 1428 erg
Learn more about kinetic energy.
brainly.com/question/26472013
#SPJ11
A jewel smith wishing to buff a finished piece of jewelry attaches a buffing disk to his drill. The radius of the disk is 3.40 mm and he operates it at 2.10 104 rad/s. (a) Determine the tangential speed of the rim of the disk. (b) The jeweler increases the operating speed so that the tangential speed of the rim of the disk is now 280 m/s. What is the period of rotation of the disk now?
The tangential speed of the rim of the disk is 71.4 m/s. The period of rotation of the disk is approximately 7.65 x 10⁻⁵ s.
(a) The tangential speed of the rim of the disk can be calculated using the formula:
v = rω
where v is the tangential speed, r is the radius of the disk, and ω is the angular velocity.
Substituting the given values, we get:
v = (3.40 mm)(2.10 x 10⁴ rad/s) = 71.4 m/s
(b) To find the period of rotation of the disk, we can use the formula:
T = 2π/ω
where T is the period of rotation and ω is the angular velocity.
We are given that the new tangential speed of the rim of the disk is 280 m/s.
To find the new angular velocity, we can rearrange the formula for tangential speed:
v = rω
ω = v/r
Substituting the given values, we get:
ω = (280 m/s)/(3.40 mm) = 8.24 x 10⁴ rad/s
Now we can use the formula for period of rotation:
T = 2π/ω = 2π/(8.24 x 10⁴ rad/s) ≈ 7.65 x 10⁻⁵ s
Learn more about velocity:
https://brainly.com/question/80295?source=archive
#SPJ11
The tangential speed of the rim of the disk is 71.4 m/s. The period of rotation of the disk is approximately 7.65 x 10⁻⁵ s.
(a) The tangential speed of the rim of the disk can be calculated using the formula:
v = rω
where v is the tangential speed, r is the radius of the disk, and ω is the angular velocity.
Substituting the given values, we get:
v = (3.40 mm)(2.10 x 10⁴ rad/s) = 71.4 m/s
(b) To find the period of rotation of the disk, we can use the formula:
T = 2π/ω
where T is the period of rotation and ω is the angular velocity.
We are given that the new tangential speed of the rim of the disk is 280 m/s.
To find the new angular velocity, we can rearrange the formula for tangential speed:
v = rω
ω = v/r
Substituting the given values, we get:
ω = (280 m/s)/(3.40 mm) = 8.24 x 10⁴ rad/s
Now we can use the formula for period of rotation:
T = 2π/ω = 2π/(8.24 x 10⁴ rad/s) ≈ 7.65 x 10⁻⁵ s
Learn more about velocity:
https://brainly.com/question/80295?source=archive
#SPJ11
Home-made x-ray source: You have a 4000 volt DC, 200 watt power supply. Which elements are suitable for use as your anode (target) material for generating Kb x-rays?
For generating Kb x-rays using a home-made x-ray source with a 4000 volt DC, 200 watt power supply, suitable elements for use as your anode (target) material would be those with a high atomic number such as tungsten (W), molybdenum (Mo), or copper (Cu).
These elements are known to produce intense Kb x-rays at the given voltage and wattage, making them ideal for use in an improvised x-ray source.
It is important to note, however, that operating a home-made x-ray source can be extremely hazardous and should only be attempted by trained professionals with appropriate safety equipment and precautions in place.
To know more about elements refer here:
https://brainly.com/question/13025901
#SPJ11
A wire carrying 15 A makes a 23 ∘ angle with a uniform magnetic field. The magnetic force per unit length of wire is 0.34 N/m .
Part A
What is the magnetic field strength? In (mT)
Express your answer using two significant figures.
Part B
What is the maximum force per unit length that could be achieved by reorienting the wire in this field? in (N/m)
Express your answer using two significant figures.
the maximum force per unit length that could be achieved by reorienting the wire in this field is approximately 0.15 N/m.
Part A:
Using the formula for magnetic force per unit length, we can solve for the magnetic field strength:
F/L = BILsinθ
0.34 N/m = B(15 A)Lsin23°
B = 0.34 N/m / (15 A)(Lsin23°)
Since we do not have the length of the wire, we cannot solve for the exact magnetic field strength. However, we can rearrange the formula to show that magnetic field strength is proportional to the magnetic force per unit length, the current, and the sine of the angle between the wire and the magnetic field:
B ∝ F/LIsinθ
Therefore, if we know the magnetic force per unit length and the angle, we can compare the strength of two different magnetic fields. For example, if we have another wire carrying the same current and making the same angle with a different magnetic field, we can compare the magnetic force per unit length and use the formula above to determine which magnetic field is stronger.
Part B:
The maximum force per unit length that could be achieved by reorienting the wire in this field would occur when the wire is perpendicular to the magnetic field. In this case, the angle θ would be 90° and the sine of 90° is 1. Therefore, we can use the same formula as above and plug in the maximum value for sinθ:
F/L = BILsinθ
F/L = BIL(1)
F/L = BIL
F/L = (0.001 T)(15 A)
F/L = 0.015 N/m
Therefore, the maximum force per unit length that could be achieved by reorienting the wire in this field is 0.015 N/m (rounded to two significant figures).
Part A
To find the magnetic field strength, we can use the formula for magnetic force per unit length on a current-carrying wire in a uniform magnetic field:
F/L = B * I * sin(θ)
where F/L is the force per unit length (0.34 N/m), B is the magnetic field strength, I is the current (15 A), and θ is the angle between the wire and the magnetic field (23°).
0.34 N/m = B * 15 A * sin(23°)
B = (0.34 N/m) / (15 A * sin(23°))
B ≈ 0.0102 T
To express the answer in millitesla (mT), we multiply by 1000:
B ≈ 10.2 mT
Part B
The maximum force per unit length occurs when the angle between the wire and the magnetic field is 90° (sin(90°) = 1):
Fmax/L = B * I * sin(90°)
Fmax/L = 10.2 mT * 15 A * 1
Fmax/L ≈ 0.153 N/m
So, the maximum force per unit length that could be achieved by reorienting the wire in this field is approximately 0.15 N/m.
To know more about magnetic field strength click here:
brainly.com/question/11462606
#SPJ11