A 45 kg object is lifted vertically at a constant speed to a height of 9.0 m by a 7.5x10² w electric motor. If this motor is 25% efficient in converting electric energy to mechanical energy, how long does the motor take to lift the object?​

Answers

Answer 1

Answer:

the time taken for the motor to lift the object is 21.17 s.

Explanation:

Given;

mass of the object, m = 45 kg

height through which the object was lifted, h = 9.0 m

electrical power used by the motor, P = 750 W

Efficiency of the electrical motor, n = 25% = 0.25

The electrical energy used by the motor in lifting the object is calculated as;

E = P x t

where;

t is the time taken for the motor to lift the object

E = 750 x t

E = 750t

The electrical energy converted by the motor to mechanical energy is calculated as;

P.E = 0.25(750t)

P.E = 187.5t

Recall, P.E = mgh

mgh = 187.5t

45 x 9.8 x 9 = 187.5t

3969 = 187.5t

t = 3969/187.5

t = 21.17 s

Therefore, the time taken for the motor to lift the object is 21.17 s.


Related Questions

Night terrors and nightmares are
really the same event.
True
False

Answers

False

“Sleep terrors differ from nightmares. The dreamer of a nightmare wakes up from the dream and may remember details, but a person who has a sleep terror episode remains asleep. Children usually don't remember anything about their sleep terrors in the morning”

On the map, which major plate is flanked by the red sea rift and the Minor Arabian Plate?


A:#1 North American Plate

B:#3 South American Plate

C:#5 Eurasian Plate

D:#2 African Plate

Answers

Answer:

D:#2 African Plate

Explanation:

The African Plate is flanked by the Red sea rift and the minor African plate.

The Red sea rift is a small part of a greater line of rifts known as the Great African Rift Valley. The rift valley is making several small lakes all through Africa and it will eventually split up the African continent.

The Red sea lift is the divergent boundary between the African plate and the Arabian plate. It means that the two plates are moving apart or spreading apart.

The photosphere refers to the Sun's:
core
atmosphere
surface
magnetic field

Answers

I think it is magnetic field

Answer:

The photosphere is the visible "surface" of the sun. So your answer would be C.

Explanation: its right

If a 75 W lightbulb is 15% efficient, how many joules of light energy does the bulb produce every minute?

Answers

Answer:

1 W = 1 J / sec       Definition of watt is 1 joule / sec

So if a bulb uses 75 J / sec it must use

75 J/s * 60 sec / min = 4500 J/min    energy used by bulb

If bulb is 15% efficient then the light delivered is

P = 4500 J / min * .15 = 675 J / min

Guys can you please help me real quick with this

Answers

Answer:

1. Wavelength = 3.2 m

2. Amplitude = 0.6 m

Explanation:

1. Determination of the wavelength.

The wavelength of a wave is defined as the distance between two successive crest. This implies that for every complete vibration, there is one wavelength.

From the diagram given above, we can see that the wave makes 2½ vibrations.

This means that there are 2½ equal wavelength of the wave. Therefore, the wavelength can be obtained as follow:

Length (L) = 8 m

Wavelength (λ) =?

2½ λ = L

5/2 λ = 8

5λ / 2 = 8

Cross multiply

5λ = 2 × 8

5λ = 16

Divide both side by 5

λ = 16 / 5

λ = 3.2 m

Therefore, wavelength of the wave is 3.2 m.

2. Determination of the amplitude.

The amplitude of a wave is defined as the maximum displacement of the wave from the origin.

From the diagram given above, the distance between the maximum and minimum displacement is given as 1.2 m. Thus, we can obtain the amplitude of wave as follow:

Distance between the maximum and minimum displacement (D) = 1.2

Amplitude (A) =?

A = ½D

A = ½ × 1.2

A = 0.6 m

Thus, the amplitude of the wave is 0.6 m

The volume of a gas decreases from 15.7 mºto 11.2 m3 while the pressure changes from 1.12 atm to 1.67 atm. If the
initial temperature is 245 K, what is the final temperature of the gas?
O 117 K
230 K
261K
.
O 512K

Answers

Answer:

Approximately [tex]261\; \rm K[/tex], if this gas is an ideal gas, and that the quantity of this gas stayed constant during these changes.

Explanation:

Let [tex]P_1[/tex] and [tex]P_2[/tex] denote the pressure of this gas before and after the changes.

Let [tex]V_1[/tex] and [tex]V_2[/tex] denote the volume of this gas before and after the changes.

Let [tex]T_1[/tex] and [tex]T_2[/tex] denote the temperature (in degrees Kelvins) of this gas before and after the changes.

Let [tex]n_1[/tex] and [tex]n_2[/tex] denote the quantity (number of moles of gas particles) in this gas before and after the changes.

Assume that this gas is an ideal gas. By the ideal gas law, the ratios [tex]\displaystyle \frac{P_1 \cdot V_1}{n_1 \cdot T_1}[/tex] and [tex]\displaystyle \frac{P_2 \cdot V_2}{n_2 \cdot T_2}[/tex] should both be equal to the ideal gas constant, [tex]R[/tex].

In other words:

[tex]R = \displaystyle \frac{P_1 \cdot V_1}{n_1 \cdot T_1}[/tex].

[tex]R =\displaystyle \frac{P_2 \cdot V_2}{n_2 \cdot T_2}[/tex].

Combine the two equations (equate the right-hand side) to obtain:

[tex]\displaystyle \frac{P_1 \cdot V_1}{n_1 \cdot T_1} = \frac{P_2 \cdot V_2}{n_2 \cdot T_2}[/tex].

Rearrange this equation for an expression for [tex]T_2[/tex], the temperature of this gas after the changes:

[tex]\displaystyle T_2 = \frac{P_2}{P_1} \cdot \frac{V_2}{V_1} \cdot \frac{n_1}{n_2} \cdot T_1[/tex].

Assume that the container of this gas was sealed, such that the quantity of this gas stayed the same during these changes. Hence: [tex]n_2 = n_1[/tex], [tex](n_2 / n_1) = 1[/tex].

[tex]\begin{aligned} T_2 &= \frac{P_2}{P_1} \cdot \frac{V_2}{V_1} \cdot \frac{n_1}{n_2}\cdot T_1 \\[0.5em] &= \frac{1.67\; \rm atm}{1.12\; \rm atm} \times \frac{11.2\; \rm m^{3}}{15.7\; \rm m^{3}} \times 1 \times 245\; \rm K \\[0.5em] &\approx 261\; \rm K\end{aligned}[/tex].

A fox runs at a speed of 16 m/s and then stops to eat a rabbit. If this all took 120
seconds, what was his acceleration?

Answers

Answer:

a = 52s²

Explanation:

How to find acceleration

Acceleration (a) is the change in velocity (Δv) over the change in time (Δt), represented by the equation a = Δv/Δt. This allows you to measure how fast velocity changes in meters per second squared (m/s^2). Acceleration is also a vector quantity, so it includes both magnitude and direction.

Solve

We know initial velocity (u = 16), velocity (v = 120) and acceleration (a = ?)

We first need to solve the velocity equation for time (t):

v = u + at

v - u = at

(v - u)/a = t

Plugging in the known values we get,

t = (v - u)/a

t = (16 m/s - 120 m/s) -2/s2

t = -104 m/s / -2 m/s2

t = 52 s

16. Two electric bulbs marked 100W 220V and 200W 200V have tungsten
filament of same length. Which of the two bulbs will have thicker
filament?

Answers

Answer:

The second bulb will have thicker filament

Explanation:

Given;

First electric bulb: Power, P₁ = 100 W and Voltage, V₁ = 220 V

Second electric bulb: Power, P₂ = 200 W and Voltage, V₂ = 200 V

Resistivity of tungsten, ρ = 4.9 x 10⁻⁸ ohm. m

Resistance of the first bulb:

[tex]P = IV = \frac{V}{R} .V = \frac{V^2}{R} \\\\R = \frac{V^2}{P} \\\\R_1 = \frac{V_1^2}{P_1} = \frac{(220)^2}{100} = 484 \ ohms[/tex]

Resistance of the second bulb:

[tex]R_2 = \frac{V_2^2}{P_2} = \frac{(200)^2}{200} = 200 \ ohms[/tex]

Resistivity of the tungsten filament is given by the following equation;

[tex]\rho = \frac{RA}{L}[/tex]

where;

L is the length of the filament

R is resistance of each filament

A is area of each filament

[tex]A = \pi r^2[/tex]

where;

r is the thickness of each filament

[tex]\rho = \frac{R (\pi r^2)}{L} \\\\\frac{\rho L}{\pi} = Rr^2 \\\\Recall ,\ \frac{\rho L}{\pi} \ is \ constant \ for \ both \ filaments\\\\R_1r_1^2 = R_2r_2^2\\\\(\frac{r_1}{r_2} )^2 = \frac{R_2}{R_1} \\\\\frac{r_1}{r_2} = \sqrt{\frac{R_2}{R_1} } \\\\\frac{r_1}{r_2} = \sqrt{\frac{200}{484} } \\\\\frac{r_1}{r_2} = 0.64\\\\r_1 = 0.64 \ r_2\\\\r_2 = 1.56 \ r_1[/tex]

Therefore, the second bulb will have thicker filament

Are all harmful effects of smoking reversible? Explain your answer.

Answers

I don’t think so, becuase is a big damage that can’t be repaired easily

Please help me!
8. Give an example of a poor blackbody radiator and explain why it is not a good blackbody radiator.
9. Does a blackbody radiator emit light waves? Explain.

Answers

Answer:

A black body radiator is an idealized body that absorbs all incoming electromagnetic radiation (thus the name of "black body").

A black body radiator is an object that has a lot of thermal energy, and it irradiates its thermal energy in the form of black body radiation (thermal radiation emitted by a black body).

a) Then, we could go to the trivial case of a mirror, a mirror is a poor blackbody radiator because a mirror reflects most of the incoming electromagnetic radiation, thus, a mirror is a really bad approximation for a black body, then a mirror is a poor black body radiator.

b) Any electromagnetic wave is a light wave (there exists "light" that we can not see). A black body radiator irradiates energy, and this radiation is in the form of electromagnetic waves, which are in essence, light waves.

Answer:

A black body radiator is an idealized body that absorbs all incoming electromagnetic radiation (thus the name of "black body").

A black body radiator is an object that has a lot of thermal energy, and it irradiates its thermal energy in the form of black body radiation (thermal radiation emitted by a black body).

a) Then, we could go to the trivial case of a mirror, a mirror is a poor blackbody radiator because a mirror reflects most of the incoming electromagnetic radiation, thus, a mirror is a really bad approximation for a black body, then a mirror is a poor black body radiator.

b) Any electromagnetic wave is a light wave (there exists "light" that we can not see). A black body radiator irradiates energy, and this radiation is in the form of electromagnetic waves, which are in essence, light waves.

Explanation:

An object, with mass 64 kg and speed 14 m/s relative to an observer, explodes into two pieces, one 2 times as massive as the other; the explosion takes place in deep space. The less massive piece stops relative to the observer. How much kinetic energy is added to the system during the explosion, as measured in the observer's reference frame

Answers

Answer:

 K_f = 1881.6 J

Explanation:

To solve this exercise, let's start by finding the velocities of the bodies.

We define a system formed by the initial object and its parts, with this the forces during the explosion are internal and the moment is conserved

initial instant. Before the explosion

        p₀ = M v₀

final instant. After the explosion

        p_f = m₁ v + m₂ 0

the moeoto is preserved

         p₀ = p_f

         M v₀ = m₁ v

         v = [tex]\frac{m_1}{M}[/tex]  v₀

in the exercise they indicate that the most massive part has twice the other part

         M = m₁ + m₂

         M = 2m₂ + m₂ = 3 m₂

         m₂ = M / 3

so the most massive part is worth

        m₁ = 2 M / 3

we substitute

        v = ⅔ v₀

with the speed of each element we can look for the kinetic energy

initial

         K₀ = ½ M v₀²

Final

         K_f = ½ m₁ v² + 0

         K_f = ½ (⅔ M) (⅔ v₀)²

         K_f = [tex]\frac{8}{27}[/tex] (½ M v₀²)

         K_f = [tex]\frac{8}{27}[/tex]  K₀

the energy added to the system is

         ΔK = Kf -K₀

         ΔK = (8/27 - 1) K₀

         ΔK = -0.7 K₀

         K_f = K₀ + ΔK

         K_f = K₀ (1 -0.7)

         K_f = 0.3 K₀

let's calculate

         K_f = 0.3 (½ 64 14²)

         K_f = 1881.6 J

A bird travels at a speed of 14.2 m/s for 514 meters. How many seconds did it
fly?

Answers

Answer:

0.54 sec

Explanation:

Answer:

Time = 36.19 seconds

Explanation:

Speed = 14.2 m/s

Distance = 514 m

Time = Distance / Speed

Time = 514 / 14.2

Time = 36.19 seconds

a disk of a radius 50 cm rotates at a constant rate of 100 rpm. what distance in meters will a point on the outside rim travel during 30 seconds of rotation?​

Answers

Answer:

239 rpm

Explanation: So the distance covered in one minute is 75,000 centimeters. The diameter of the wheel is 100 cm, so the radius is 50 cm, and the circumference is 100π cm. How many of these circumferences (or wheel revolutions) fit inside the 75,000 cm? In other words, if I were to peel this wheel's tread from the cart and lay it out flat, it would measure a distance of 100π cm. How many of these lengths fit into the entire distance covered in one minute? To find out how many of (this) fit into so many of (that), I must divide (that) by (this), so:

100πcm/rev

75,000cm/min

​750 min rev≈238.7324146RPM

A spring has a spring constant of 450 N/m. How much must this spring be stretched to store 49 J of potential energy?

Answers

Answer:

W = 1/2 K x^2

x^2 = 2 * W / K = 2 * 49 J / (N/m)  = .218 / m^2

x =  .467 m

Squids and octopuses propel themselves by expelling water. They do this by keeping water in a cavity and then suddenly contracting the cavity to force out the water through an opening. A 6.50 kg squid (including the water in the cavity) at rest suddenly sees a dangerous predator. Part A If the squid has 1.55 kg of water in its cavity, at what speed must it expel this water to instantaneously achieve a speed of 2.40 m/s to escape the predator

Answers

Answer:

10.1 m/s

Explanation:

By Newton's third law, the force on the squid and that due to the water expelled form an action reaction pair.

And by the law of conservation of momentum,

initial momentum of squid + expelled water = final momentum of squid + expelled water.

Now, the initial momentum of the system is zero.

So, 0 = final momentum of squid + expelled water

0 = MV + mv where M = mass of squid = 6.50kg, V = velocity of squid = 2.40m/s, m =mass of water in cavity = 1.55 kg and v = velocity of water expelled

So, MV + mv = 0

MV = -mv

v = -MV/m

= -6.50 kg × 2.40 m/s ÷ 1.55 kg

= -15.6 kgm/s ÷ 1.55 kg

= -10.1 m/s

So, speed must it expel this water to instantaneously achieve a speed of 2.40 m/s to escape the predator is 10.1 m/s

Which well will give the most water.

YOU WILL GET 50 POINTS

Answers

The well that will have most of the water will be well A.

What is an underground water supply?

The underground water supply is defined as a type of water that exists underground in saturated zones beneath the land surface.

From the two wells represented in the diagrams above, Well A has water supply from underground which is lacking in well B.

Therefore, well A will have most of the water more than B.

Learn more about water cycle here:

https://brainly.com/question/25796102

#SPJ1

a sprinter accelerates from rest to 14m/s in 1.38 s. what is her acceleration in km/h^2

Answers

The acceleration of the sprinter is approximately 131,426 km/h^2.

To find the acceleration in km/h^2, we need to convert the units from meters per second (m/s) to kilometers per hour (km/h) and adjust the time units accordingly. Here's the step-by-step calculation:

1. Convert the final velocity from m/s to km/h:

  14 m/s * (3.6 km/h) / (1 m/s) = 50.4 km/h

2. Convert the time from seconds (s) to hours (h):

  1.38 s * (1 h) / (3600 s) = 0.0003833 h

3. Calculate the acceleration using the formula:

  Acceleration = (Final velocity - Initial velocity) / Time

Since the initial velocity is 0 m/s (rest), we have:

Acceleration = (50.4 km/h - 0 km/h) / 0.0003833 h

Acceleration = 131425.955 km/h^2

For more such questions on acceleration,click on

https://brainly.com/question/460763

#SPJ8    

types of wave interactions include​

Answers

Reflection
Refraction
Diffraction
Hope this helps :))

a Ferris wheel with a diameter of 35 m starts from rest and achieves its maximum operational tangential speed of 2.3 m/s in a time of 15 s. what is the magnitude of the wheels angular acceleration?
b. what is the magnitude of the tangential acceleration after the maximum operational speed is reached?​

Answers

First calculate the radius 35/2=17.5m

What is the force between two 1.0 X 10^-5 C charges separated by 2.0 m?

Answers

According to Coulomb's law, the force between the given charges is 0.225N which is explained below.

Coulomb's Law:

Force on two identical charges q separate by a distance of r is given by:

F = kq²/r²

where k is Coulomb's constant

q is the charge

r is the separation between the charges

Given that q = 1×10⁻⁵C,

and r = 2m

So, the force between the given charges will be:

F = (9×10⁹)(1×10⁻⁵)²/2²

F = 0.225N is the required force.

Learn more about Coulomb's law:

https://brainly.com/question/506926?referrer=searchResults

Establishing a potential difference The deflection plates in an oscilloscope are 10 cm by 2 cm with a gap distance of 1 mm. A 100 volt potential difference is suddenly applied to the initially uncharged plates through a 1000 ohm resistor in series with the deflection plates. How long does it take for the potential difference between the deflection plates to reach 60 volts

Answers

Answer:

[tex]1.62\times 10^{-8}\ \text{s}[/tex]

Explanation:

[tex]\epsilon_0[/tex] = Vacuum permittivity = [tex]8.854\times 10^{-12}\ \text{F/m}[/tex]

[tex]A[/tex] = Area = [tex]10\times 2\times 10^{-4}\ \text{m}^2[/tex]

[tex]d[/tex] = Distance between plates = 1 mm

[tex]V_c[/tex] = Changed voltage = 60 V

[tex]V[/tex] = Initial voltage = 100 V

[tex]R[/tex] = Resistance = [tex]1000\ \Omega[/tex]

Capacitance is given by

[tex]C=\dfrac{\epsilon_0A}{d}\\\Rightarrow C=\dfrac{8.854\times 10^{-12}\times 10\times 2\times 10^{-4}}{1\times 10^{-3}}\\\Rightarrow C=1.7708\times 10^{-11}\ \text{F}[/tex]

We have the relation

[tex]V_c=V(1-e^{-\dfrac{t}{CR}})\\\Rightarrow e^{-\dfrac{t}{CR}}=1-\dfrac{V_c}{V}\\\Rightarrow -\dfrac{t}{CR}=\ln (1-\dfrac{V_c}{V})\\\Rightarrow t=-CR\ln (1-\dfrac{V_c}{V})\\\Rightarrow t=-1.7708\times 10^{-11}\times 1000\ln(1-\dfrac{60}{100})\\\Rightarrow t=1.62\times 10^{-8}\ \text{s}[/tex]

The time taken for the potential difference to reach the required level is [tex]1.62\times 10^{-8}\ \text{s}[/tex].

An 80- quarterback jumps straight up in the air right before throwing a 0.43- football horizontally at 15 . How fast will he be moving backward just after releasing the ball? Suppose that the quarterback takes 0.30 to return to the ground after throwing the ball. How far d will he move horizontally, assuming his speed is constant?

Answers

Answer:

a)

the quarterback will be moving back at speed of 0.080625 m/s

b)

the distance moved horizontally by the quarterback is 0.0241875 m or 2.41875 cm

Explanation:

Given the data in the question;

a)

How fast will he be moving backward just after releasing the ball?

using conservation of momentum;

m₁v₁ = m₂v₂

v₂ = m₁v₁ / m₂

where m₁ is initial mass ( 0.43 kg )

m₂ is the final mass ( 80 kg )

v₁ is the initial velocity  ( 15 m/s )

v₂ is the final velocity

so we substitute

v₂ = ( 0.43 × 15 ) / 80

v₂ = 6.45 / 80

v₂ = 0.080625 m/s

Therefore, the quarterback will be moving back at speed of 0.080625 m/s

b) Suppose that the quarterback takes 0.30 to return to the ground after throwing the ball. How far d will he move horizontally, assuming his speed is constant?

we make use of the relation between time, distance and speed;

s = d/t

d = st

where s is the speed ( 0.080625 m/s )

t is time ( 0.30 s )

so we substitute

d = 0.080625 × 0.30

d = 0.0241875 m or 2.41875 cm

Therefore, the distance moved horizontally by the quarterback is 0.0241875 m or 2.41875 cm

PLEASE HELP!! :)
Which of the following options would increase the electric force the most?

a. tripling the charge on one particle

b. changing the sign of one of the particles.

c. doubling the charge on one particle

d. doubling the charge on both particles

Answers

Im not sure but i guess you should try A

Guys please help. I need this question

Answers

I think it is 6!!!!!!!!!!!
6!!!!!!!!!!!!!!!!!!!!!!!!!!!!

How does the force of gravity and the force of earth contribute to africa's poverty?

Answers

Answer:

The force of gravity is not the same as being on the earth. when your on the earth there no gravitational pull its all up to the air

Explanation:

No explanation

What is the speed of a ball that is attached to a string and swings in a horizontal circle of radius 2.0 m with the central acceleration of 15 m/s^2?

Answers

Answer:

5.48 m/s.

Explanation:

Use the formula a=v^2/r.

The graph shows the heating curve of water the X axis shows heat added overtime and Y axis shows the temperature identify the regions were liquid water is present

Answers

Answer:

liquid, solid, and gas. A heating curve shows how the temperature changes as a substance is heated up at a constant rate.

Explanation:

liquid is often the bridge between solid and gas

not always, but most times.

For water, liquid water would probably be at temperature Y= 32- 212 degrees F, or Y= 0-100 degrees C.

Apologies, I hope this helps.

How would increasing the pressure of this reaction affect the equilibrium

Answers

Explanation:

c because there is element

Answer:

C. H2 and N2 would react to produce more NH3

Explanation:

A.P.E.X

if 400g is 1kg find the ratio in the simplest form​

Answers

2:5

Explanation:

400g : 1kg

400g: 1000g

4 : 10

2 : 5

1- charging by touch occurs when electrons are transmitted by direct contact.
(Right)
(wrong)

2- Electric charges are preserved, they are not created or destroyed.
(Right)
(wrong)​

Answers

Answer:

#1 - True (touch) charging when electric conductors actually touch one another.

#2. True - electrical charges are conserved (not destroyed)

Other Questions
The statement that "inflation is always and everywhere afiscal phenomenon" is one of the most famous statements ineconomics it was made byPaul KrugmanJerome PowellThomas SargentRobert Solow David Gabel If the elasticity of demand is 4, and the price of a cup of coffee is $2, how much would the seller need to reduce her price in order to increase the quantity sold by 20 percent? Instructions: Enter your answer rounded to 2 decimal places (i.e in dollars and cents). The seller would need to reduce her price by: $[ 4.8 View previous attempt For many plants, carbon dioxide is a limiting factor.What happens when more carbon dioxide is available to plants?a.Plant growth increases.b.Plant growth stays the same.c.Plant growth decreases.d.Plant growth may increase or decrease. The demand function for a good is P = 125-Q5 (a) Find expressions for TR, MR and AR. 4 marks (b) Evaluate TR, MR and AR at Q=10. Hence, explain in words, the meaning of each function at Q = 10. 6 marks (e) Calculate the value of Q for which MR = 0. 4 marks 2. A firm's fixed costs are 1000 and variable costs are given by 3Q. (a) Write down the equation for TC. Calculate the value of TC when Q = 20. 3 marks (b) Write down the equation for MC. Calculate the value of MC when Q = 20. Describe, in words, the meaning of MC for this function. 4 marks 3. Find the maximum and/or minimum values (if any) for each of the functions below. 5 marks (a) P=-2Q+8Q (b) Y=x^3-3x^2-9x 1. finance going over budget due to exigency in the campus event: Morelli Electric Motor Corporation manufactures electric motors for commercial use. The company produces three models, designated as standard, deluxe, and heavy-duty. The company uses a job-order cost-accounting system with manufacturing overhead applied on the basis of direct-labor hours. The system has been in place with little change for 25 years. Product costs and annual sales data are as follows: A late penalty of 10% will apply to new answers Intro Samsung has preferred stock outstanding with a constant annual dividend of $2.2 that is promised forever. Samsung has a required return of 10% Attempt 1/10 for 9 pts. Part 1 What is the value of Samsung's preferred stock? how are island arcs created Does the following graph exist?A simple digraph with 3 vertices with in-degrees 0, 1, 2, and out-degrees 0, 1, 2 respectively?A simple digraph (directed graph) with 3 vertices with in-degrees 1, 1, 1 and out-degrees 1, 1, 1? Recall the last problem on Exam 2, which was about how a shelter cat should behave and whether Dave and Charlotte should adopt it. You should have found that the game had a semi- separating equilibrium. The payoff matrix in that game is shown below, with the cat's payoffs first. This numbering assumes that you numbered Nature's node as 1. (You can take a look at the exam solutions for how I got to this matrix, or to see the setup if you don't remember it.) DC A4L5 LALS CAT P2P3 64,-34 -58, 5 P2B3 -20, 18.5 -44, -26.5 a. Find and formally state the Bayesian-Nash equilibrium. Show your work, and if you are using decimals rather than fractions for any part of question 2, please go to four places after the decimal. Round carefully! b. If Dave and Charlotte observe that the Cat purrs, what is their posterior belief that the cat is Nice? What is their posterior belief that it is Mean? Show your work, using the method from class (HINT: you need to answer part "a" before you can do this part!) the aquilibrium from part "a" and Dave and Charlotte's posterior beliefs key inputs to the verification process include select the three correct answers A thermometer reading 22 Celsius is placed in an oven preheated to a constant temperature. Through a glass window in the oven door, an observer records that the thermometer read 31 after 39 seconds and 32 after 78 seconds. How hot is the oven? Increasing your OR ING leverage (increase in Fixed costs) usually involves an investment in fixed assets. One reason is to increase capacity to meet demand. Another KEY reason to increase leverage is to:___________ a. Reduce variable costs b. Reduce fixed costs c. increase borrowings d. Improve profits Ann wants to buy a property which costs $3,500,000. She gets a mortgage with 75% LTV. What is Anns Debt to Equity ratio for this purchase? A. 3:4 B. 3:1 C. 5:1 D. 4:1 Solve the separable differential equation y' = 3yx^2?. Leave your answer in implicit form. Use c for the constant of integration. log |y| = x^3 + c . . (5 points) Several statements about a differentiable, invertible function f(x) and its inverse f-1(x) are written below. Mark each statement as either "TRUE" or "FALSE" (no work need be included for this question). = 1. If f(-10) = 5 then 10 = f-1(5). 2. If f is increasing on its domain, then f-1 is decreasing on its domain. 3. If x is in the domain of f-1 then $(81(a)) 4. If f is concave up on its domain then f-1 is concave up on its domain. (Hint: think about the examples f(x) = em and f-1(x) = ln x.) 5. The domain of f-1 is the range of f. 3. (10 points) Determine where the function f(x) = 2x2 ln(x/4) is increasing and decreasing. Which of the following personality dimensions is typically associated with a person being nondepressed, secure, and content?a. Extroversion b. Adjustment c. Agreeablenessd. Conscientiousness e. Openness to experience why read is edge aligned and write is centered aligned in ddr .In a perfectly competitive industry, there are two types of firms: low-cost producers and high-cost producers. The minimum average total cost of the high-cost producers is $150. The low-cost producers have a long-run total cost curve given by LTC = 150Q - 15Q2 + 0.4Q3, where LMC = 150 - 30Q + 1.2Q2. How much economic rent does the low-cost producer earn? read about islamic capitalism in chapter 4. do you think that business practices in an islamic country are likely to differ from business practices in the united states? if so how?