The specific heat of the metal, assuming no heat is exchanged with the surroundings is 2140 J/(kg•K).
Specific heat capacity of the metal
The specific heat capacity of the metal is determined from the principle of conservation of energy.
energy lost by the metal = energy gained by aluminum + energy gained by water
Q = mcΔθ
where;
m is mass (kg)c is specific heat capacityΔθ is change in temperature0.425c(100 - 40) = 0.1(900)(40 - 15) + 0.5(4186)(40 - 15)
25.5c = 2250 + 52,325
c = 54,575/25.5
c = 2140 J/(kg•K)
Learn more about specific heat capacity here: https://brainly.com/question/21406849
#SPJ1
The mass of a piece of gold is 57 g and its volume is 3 cm³. What is its
density?
A 15 g/cm³
B. 54 g/cm³
C. 14 g/cm³
OD. 19 g/cm³
Swamps and other wetlands do not offer much value to humans. True or false?
The subject for this question is science (I'm not sure if science is called physics or chemistry)
The statement 'Swamps and other wetlands do not offer much value to humans' is FALSE.
What are Swamps?Swamps and other wetlands are specific ecosystems that are abundant in biodiversity and therefore offer many advantages.
Biodiversity is fundamental to discovering new biotechnological applications and therefore swamps are fundamental for humans.
In conclusion, The statement 'Swamps and other wetlands do not offer much value to humans' is FALSE.
Learn more about swamp diversity here:
https://brainly.com/question/14619172
#SPJ1
3. Two wires increase in length by the same amount when both their temperatures increase by the same amount, as shown in the diagram. Before the temperature increase, the longer wire is 1.2525 m long. The shorter wire’s linear coefficient of thermal expansion is 1.135 times that of the longer wire. How much shorter is the shorter wire before the temperature increase? Answer to three significant figures
Viết cho Ngọc Khánh
Two wires increase in length by the same amount when both their temperatures increase by the same amount, the shortness of the wire before the temperature increase is mathematically given as
dL=0.1485m
How much shorter is the shorter wire before the temperature increase?Generally, the equation for change in length is mathematically given as
[tex]dl=lo \alpha dt[/tex]
Therefore
dl1=dl2
Where
a2=1.35a1
Hence
a1l1dt= a2l2dt
a1(1.2525)= a1*(1.135)(l2)
L2=1.104m
In conclusion, a change in length due to temperature is
dL=1.2525-1.104m
dL=0.1485m
Read more about Temperature
https://brainly.com/question/13439286
#SPJ1
The chemical symbol for the element carbon ‘ aluminum hydrogen ‘oxygen and sodium
ANSWER:
C = carbon
Al = aluminium
H = hydrogen
O = oxygen
Na = sodium
I hope it helps u dear (^^)
A rocket is fired with an initial velocity of 100m/s at an angle of 550 above the horizontal. It explodes on the mountain side 12s after its firing. What is the x-and y- coordinates of the rocket relative to its firing point?
The rocket's x- and y-coordinates relative to its launching point will be -0.975 and -0.219 m/sec, respectively.
What is velocity?The change of displacement with respect to time is defined as the velocity. Velocity is a vector quantity. it is a time-based component.
Velocity at any angle is resolved to get its component of x and y-direction.
Given data;
V = 100m/s
θ=550°
t= 142 sec
The given velocity is resolved into the component as:
[tex]\rm V_X=Vcos \theta \\\\ V_y = Vsin\theta[/tex]
The x coordinate of the rocket:
[tex]\rm V_x = 100 cos \ 550^0 \\\\ V_x = -0.975616[/tex]
The y coordinate of the rocket:
[tex]\rm V_y =100 sin \ 550^0 \\\\ V_y = -0.219484[/tex]
Hence, the x-and y- coordinates of the rocket relative to its firing point will be -0.975 and -0.219 m/sec.
To learn more about the velocity refer to the link ;
https://brainly.com/question/862972
#SPJ1
Calculate the work done by a force of 30 N in lifting a load of 2 kg to a height of 10 m (g = 10 m/s2)
F=mg
F= 2 (kg) × 10 (m/s2) = 20 N
W= Fd = mgh
W= 20 × 10 = 200 J
Guys, please answer. If the relationship gives a product of 20 N, why is 30 N in the question?
Answer:
300 J
Explanation:
Given :
Applied force = 30 NMass = 2 kgHeight = 10 mg = 10 m/s²Work done by the force :
Work done = Force x DisplacementWork done = mg x hWork done = 30 N x 10 mWork done = 300 JNote :
What you have calculated is the work done by gravitational force on the object (that too, incorrectly)But in the end, it asks for work done by the force of 30NHence, the given answer ~2069 (Set B) Q. No. 9d How much force is required to punch a hole 1 cm in diameter in a steel sheet 5mm thick whose shearing strength is 2.76 × 108 Nm 2. X [4]
The force required to punch a hole 1 cm in diameter in a steel sheet is 0.176 x 10¹³ N.
What is force?The force is defined as the shear stress or pressure applied per unit area.
F = P/A
Given is a steel sheet whose thickness t = 5mm = 5x 10⁻³ m, shearing strength P = 2.76 × 10⁸ N/m², diameter of hole d = 1cm = 1x 10⁻² m
The area to be punched A = πd xt
A = π x 1x 10⁻² x5x 10⁻³
A = 15.7 x 10⁻⁵ m²
The force required to punch a hole is
F = 2.76 × 10⁸ / 15.7 x 10⁻⁵
F = 0.176 x 10¹³ N.
Thus, the punching force is 0.176 x 10¹³ N.
Learn more about force.
https://brainly.com/question/21763500
#SPJ1
What is the meaning of the safety symbol shown below?
Answer:
D. Poison
Explanation:
Define 1 volt. Express it in terms of SI unit of work and charge calculate the amount of energy consumed in carrying a charge of 1 coulomb through a battery of 3 V.
Answer:
Work done =3 joules
Explanation:
1 volt is the same as 1 Coulomb and 1 Joule
V=W/Q
1=W/3
W=3 x 1
W=3 Joules
when solving for t you used sin theta instead of cos theta?
Looking out from a vertex with angle θ, sin(θ) is the ratio of the opposite side to the hypotenuse , while cos(θ) is the ratio of the adjacent side to the hypotenuse . No matter the size of the triangle, the values of sin(θ) and cos(θ) are the same for a given θ, as illustrated below.
Mark as brainlest answer!
One of the possible criteria of Schizophrenia is hallucinations.
Select one:
O True
O False
The radius of a nucleus is about 1/10000 that of an atom.
Calculate the radius of a magnesium nucleus.
Give your answer in standard form.
The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.
What is nucleus?The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.
So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.
Learn more about radius here: https://brainly.com/question/24375372
#SPJ1
what is difference between heat engine and carnot engine
Answer: A heat engine uses temperature differences which cause pressure changes to exert force on a moving part. A Carnot Process is a theoretical explanation of a process involving pressure and temperature changes during ,amongst other things, phase changes.
Explanation:
Answer: The difference is a heat engine uses temperature differences which cause pressure changes to exert force on a moving part, A Carnot engine is only a theoretical explanation of a process involving pressure and temperature changes during or amongst other things.
Explanation:
Calculate the amount of energy needed to boil away 1.6 L of water that initially has a temperature of 55 °C.
The amount of energy needed to boil away the water at the initial temperature is 301,248 J.
Energy required to boil the water
The amount of energy needed to boil the water at the given is calculated as follows;
Q = mcΔθ
where;
m is mass of waterdensity of water = 1000 g/L
mass = density x volume
mass of water = 1000 g/L x 1.6 L = 1,600 g
Q = 1600 g x 4.184 J/g⁰C x (100⁰C - 55 ⁰C)
Q = 301,248 J
Learn more about heat capacity here: https://brainly.com/question/21406849
#SPJ1
Electromagnets show the interaction of
a. electric current and electric
charges
b. electric charges and magnetic
dipoles
c. magnetic fields and iron filings
d. magnetic fields and electric
currents
Answer:
B
Explanation:
Electric charges and magnetic dipoles
You want to lift a heavy box with a mass L = 56.0 kg using the two-ideal pulley system as shown. With what minimum force do you have to pull down on the rope in order to lift the box at a constant velocity? One pulley is attached to the ceiling and one to the box.
The minimum force required to lift the box at constant velocity is determined as 274.4 N.
Minimum force required
The minimum force required to lift the box at constant velocity is the tension in one of the pulleys, and the magnitude is calculated as follows;
2T = mg
where;
m is mass of the boxT is the minimum force required2T = mg
T = mg/2
T = (56 x 9.8)/2
T = 274.4 N
Learn more about minimum force here: https://brainly.in/question/47873510
#SPJ1
What is tan for the given triangle?
Answer:
tan is 15 for that triangle
Answer:
c. 1.33
Explanation:
edmentum
Cells are made up of molecules. Why then do we say that a structural unit of a living organism is a cell and not a molecule?
Answer:
Because molecules cannot function independently whereas when they combine they give rise to functional unit called cell.
what is dipersion of light
Answer:
The separation of visible light into its different colors is known as dispersion. It was mentioned in the Light and Color unit that each color is characteristic of a distinct wave frequency; and different frequencies of light waves will bend varying amounts upon passage through a prism
Explanation:
the frequency of a pendulum has a period of 1.13 seconds is?
A) 0.88
B) 1.13
C) 1.27
D) 11.3
Answer:
A 0.88
Explanation:
frequency=1/period
=1/1.13=0.88
?How much work is done by 5 kg water as it is evaporated at 10 bar pressure
Answer:
The (latent) heat of vaporization (∆Hvap) also known as the enthalpy of vaporization or evaporation, is the amount of energy (enthalpy) that must be added to a liquid substance, to transform a given quantity of the substance into a gas.
The enthalpy of vaporization is a function of the pressure at which that transformation takes place. The heat of vaporization diminishes with increasing temperature and it vanishes completely at a certain point called the critical temperature (Critical temperature for water: 373.946 °C or 705.103 °F, Critical pressure: 220.6 bar = 22.06 MPa = 3200 psi ).
An object has an initial velocity of 15 m/s and a constant acceleration of 4 m/s2. How long will it take before its final velocity is equal to three times its initial velocity?
Based on the calculations, it would take 7.5 seconds before the final velocity of this object would be equal to three times its initial velocity.
Given the following data:
Initial velocity = 15 m/s.Constant acceleration = 4 m/s².Final velocity = 3 × 15 = 45 m/s.How to calculate the acceleration of an object?Mathematically, acceleration can be calculated by using the first equation of motion:
v = u + at
Where:
v is the final velocity.u is the initial velocity.t is the time measured in seconds.Making t the subject of formula, we have:
t = (v - u)/a
Substituting the given parameters into the formula, we have:
t = (45 - 15)/4
t = 30/4
t = 7.5 seconds.
Read more on acceleration here: brainly.com/question/24728358
#SPJ1
Why would you expect a person with impairment of the organs of equilibrium to become more unsteady when the eyes are closed?
Answer:
A person with impairment of organs of equilibrium would compensate for their lack of sensory information by their eyes therefore if their eyes are closed they aren't able to sense their location in space accurately (Proprioception)
Explanation:
PLEASE RESPOND I NEED FAST THANK YOU GIVING LOTS OF POINTS WILL GIVE BRAINLIEST
#1
The kinetic energy decreases
#2
This is because of law of conservation of linear momentum .
The momentum is conserved
So the velocity of ball decreases than before .
So kinetic energy also decreases
#3 and #4
Kinetic energy of the can increases as after the collision the velocity of the can increases so the kinetic energy also increases
In the video, the students create two charged tapes, a "pointy" tape and a "square" tape. The pointy tape is first placed on top of the square tape, and the two are pulled apart. After pulling them apart, the students observed the behavior of the tapes when they were brought near each other, but not touching each other.
The two pointy tapes repel. This shows they have the same type of charge.
Attraction of two chargesThe attraction of two charges occurs when the two charges have opposite charges.
Repulsion of two chargesThe repulsion of two charges occurs when the two charges have similar charges.
Thus, since the two pointy tapes will have the same charge, we can conclude that they will repel each other when brought near each other.
The complete question is below:
How did the pointy tapes behave when brought near each other, and what does this demonstrate about their charges?
Two pointy tapes repel. This shows they have opposite types of charge.
Two pointy tapes attract. This shows they have opposite types of charge.
Two pointy tapes repel. This shows they have the same type of charge.
Two pointy tapes attract. This shows they have the same type of charge.
Learn more about charges here: https://brainly.com/question/1153322
#SPJ1
Fluid Dynamics links the concept of viscosity to the fluid flow. Mention how the contact angle, surface tension, capillarity governs the flow?
Fluid Dynamics is an area of research that started a long time ago, along with Calculus. It combines techniques of Mathematical Analysis and of Dynamical Systems, such as Bifurcation Theory, among others.
What is surface tension?
Surface Tension is a phenomenon that occurs in all liquids, it is characterized by the formation of a kind of elastic membrane at its ends.
How to calculate the contact angle?Contact angles in powders can be measured using the sessile drop measurement in the compressed powder or using the force tensiometer with the Washburn method.
In fluid dynamics, the variables of surface tension, viscosity and contact angle are treated. When dealing with viscosity we have fluid can be viscous or a real fluid. In general, fluids are viscous.
See more about fluid dynamics at brainly.com/question/5144636
#SPJ1
A lamp with a resistance of 60 Ohms is plugged into a 110-Volt household circuit. How much current flows through the lamp?
The current flowing through the lamp is 1.833A
What is current?The current is the stream of charges which flow inside the conductors when connected across the end of voltage.
From the Ohm's law, V =IR
Here, R is the proportionality constant called resistance of the resistor
A lamp with a resistance of 60 Ohms is plugged into a 110-Volt household circuit.
I = V/R
Put the values, we get
I = 110/60
I = 1.833A
Thus, the current flowing through the lamp is 1.833A
Learn more about current.
brainly.com/question/10677063
#SPJ1
Iron is attracted to magnets and rusts when in the presence of oxygen. Which is true about these properties of iron?
Iron forms an oxide when exposed to air is a true property about this element.
What is Iron?This is an element which has magnetic properties and forms an oxide when exposed to air.
Iron forms ferric oxide in the presence of oxygen which is the brown like color seen in the form of rust.
Read more about Iron here vhttps://brainly.com/question/14964747
#SPJ1
Explain four different types of fitness technologies that are used to help improve your fitness level.
Answer: endurance, strength, balance, flexibility
Explanation:
walking, jogging, swimming, biking
a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity
Answer:
6 m/s
Explanation:
Average velocity = Total distance covered / Time taken to cover distance
Finding Average Velocity :
⇒ 20 m + 40 m / 2 s + 8 s
⇒ 60 m / 10 s
⇒ 6 m/s
a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity.
Solution:AV = 20m + 40m/s 2s + 8secondAV = 60m/s ÷ 10sAV = 6m/s²So the Average velocity is 6m/s²