A 3 kg block collides with a massless spring of spring constant 98 N/m attached to a wall. The speed of the block was observed to be 1.5 m/s at the moment of collision. The acceleration of gravity is 9.8 m/s 2 . How far does the spring compress if the surface on which the mass moves is frictionless

Answers

Answer 1

Answer: 0.83 m

Explanation:

Given

mass of the block is m=3 kg

spring constant k=98 N/m

The Speed at the time of collision is v=1.5 m/s

Here, the kinetic energy of the block is converted into Elastic potential energy

[tex]\Rightarrow \dfrac{1}{2}mv^2=\dfrac{1}{2}kx^2 \\\\\Rightarrow 3\times 1.5^2=98\times x^2\\\\\Rightarrow x^2=0.6887\\\\\Rightarrow x=0.829\approx 0.83\ m[/tex]


Related Questions

An aircraft has to fly between two cities, one of which is 600.0 km north of the other. The pilot starts from the southern city and encounters a steady 100.0 km/h wind that blows from the northeast. The plane has a cruising speed of 236.0 km/h in still air. In what direction (relative to east) must the pilot head her plane

Answers

Answer:

72.57° North of east

Explanation:

From the given information:

We can compute the velocity plane that is related to the ground in air in the North direction as;

[tex]v^{\to} _{PG} = v \\ \\ v^{\to} _{PG,x} = 0 \\ \\ v^{\to} _{PG,y} = v[/tex]

However, the velocity of the wind-related to the ground from the NorthEast  direction is;

[tex]v^{\to}_{wG}=100 \ km/h \\ \\ \text{from North East} \\ \\ v_{wG,x} = (-100 \ km/h ) cos 45 = -70.7 km/h \\ \\ v_{wG,y} = (-100 \ km/h ) sin 45 = -70.7 km/h[/tex]

Now,

Since the plane is moving with a 236 km/h speed in the Northeast direction;

Then;

[tex]v^{\to} _{pw} = 236 \ km/h \\ \\ v^{\to} _{pw.x} = (236 m/s) cos \theta \\ \\ v^{\to} _{pw,y} = (236\ m/s) sin \theta \\ \\ v_{pG,x} = v_{pw,x} + v_{w G,x} \\ \\ \implies 0 = (236 \ km/h) sin \theta -( 70.7 \ km/h) \\ \\ \implies cos \theta = \dfrac{70.7 \ km/h}{236 \ km/h} \\ \\ \theta = cos^{-1} (0.2996) \\ \\ \mathbf{\theta = 72.57}[/tex]

Protons, neutrons, electrons, and a nucleus are

Answers

It would be Atoms, they’re all made up of these tiny particles

The indices of refraction for her contact lens, cornea, and the fluid behind her cornea are 1.6, 1.4, and 1.3, respectively. Light is incident from air onto her contact lens at an angle of 30 ∘∘ from the normal of the surface. At what angle is the light traveling in the fluid behind her cornea?

Answers

Answer:

[tex]23^{\circ}[/tex]

Explanation:

n = Refractive index of air = 1

[tex]n_1[/tex] = Refractive index of contact lens = 1.6

[tex]n_2[/tex] = Refractive index of cornea = 1.4

[tex]n_3[/tex] = Refractive index of fluid = 1.3

From Snell's law

[tex]n\sin30^{\circ}=n_1\sin\theta\\\Rightarrow \theta=\sin^{-1}\dfrac{1\sin30^{\circ}}{1.6}\\\Rightarrow \theta=18.21^{\circ}[/tex]

[tex]n_1\sin\theta=n_2\sin\theta_1\\\Rightarrow \theta_{1}=\sin^{-1}\dfrac{1.6\times \sin18.21^{\circ}}{1.4}\\\Rightarrow \theta_1=20.92^{\circ}[/tex]

[tex]n_2\sin\theta_1=n_3\sin\theta_3\\\Rightarrow \theta_3=\sin^{-1}\dfrac{1.4\sin20.92^{\circ}}{1.3}\\\Rightarrow \theta_3=22.62^{\circ}\approx 23^{\circ}[/tex]

The angle is the light traveling in the fluid behind her cornea is [tex]23^{\circ}[/tex].

The angle is the light traveling in the fluid will be 23⁰. Light is traveling in a particular direction with an angle.

What is snell law?

"The ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant, for the light of a given color and for a given set of media,

The given data in the problem is;

n is the refractive index of air = 1

n₁ is the refractive index of contact lens = 1.6

n₂ is the refractive index of cornea = 1.4

n is the refractive index of fluid = 1.3

According to Snell's law. The formula for Snell's law is

[tex]\rm n sin30^0 = n_1 sin\theta \\\\ \theta = sin^{- 1}(\frac{1sin30^0}{1.6} )\\\\ \theta = 18.21 ^0[/tex]

For contact lenses;

[tex]\rm n_1sin\theta = n_2 sin\theta_1 \\\\ \theta_1 = sin^{-1}\frac{1.6 \times sin 18.21^0}{1.4} \\\\ \theta_1 =20.92 ^0[/tex]

For fluid;

[tex]n_2 sin\theta_1 = n_2 sin \theta_3\\\\ \theta_3 = sin^{-1}\frac{1.4 sin 20.92^0}{1.3} \\\\ \theta_3 = 22.62 ^ 0 =23^0[/tex]

Hence the angle is the light traveling in the fluid will be 23⁰.

To learn more about snell's law refer to the link;

https://brainly.com/question/10112549

using the human species as an example, explain what is meant by variation of traits

Answers

a variation of traits could be a variation of personality traits? everybody is different? what I do know Is that variation can be inherited or environmental which means that you get it from your ancestors through DNA or you get it from the environment around you

Two solenoids of equal length are each made of 2000 turns of copper wire per meter. Solenoid I has a 5.00 cm radius; solenoid II a 10.0 cm radius. When equal currents are present in the two solenoids, the ratio of the magnitude of the magnetic field BIalong the axis of solenoid I to the magnitude of the magnetic field BIIalong the axis of solenoid II, BI/BII, is

Answers

Answer:

BI/BII = 1

Explanation:

The magnetic field due to a solenoid is given by the following formula:

[tex]B = \mu nI\\[/tex]

where,

B = Magnetic Field due to solenoid

μ = permeability of free space

n = No. of turns per unit length

I = current passing through the solenoid

Now for the first solenoid:

[tex]B_1 = \mu n_1I_1 \\[/tex]

For the second solenoid:

[tex]B_2 = \mu n_2I_2\\[/tex]

Dividing both equations:

[tex]\frac{B_1}{B_2} = \frac{\mu n_1I_1}{\mu n_2I_2}\\[/tex]

here, no. of turns and the current passing through each solenoid is same:

n₁ = n₂ and I₁ = I₂

Therefore,

[tex]\frac{B_1}{B_2} = \frac{\mu nI}{\mu nI}\\[/tex]

BI/BII = 1

7) If someone behaves against your company's code of ethics, what should you do?
A) Ignore it and mind your own business.
B) Suggest that they talk to the human resources department.
C) Talk to them about the situation.
D) Report the problem to your supervisor

Answers

Answer:

D) Report the problem to your supervisor.

Explanation:

This is probably the most efficient way get them to stop or to get them to follow the rules <3

D. Because you should report it on how the person is acting

What is characteristic of a good insulator?
A. Electrons are usually not moving at all.
B. Electrons are free to move around.
C. Electrons are semi-free to move around.
D. Electrons are tightly bound to the nuclei.

Answers

Answer:

D. Electrons are tightly bound to the nuclei.

Explanation:

In an insulator, the electrons of the outer most shell are bound with a very high electrostatic forces coming from the nucleus of each atom so electrons cannot flow around all atoms making up the material as in a conductor.

The characteristic of a good insulator is Electrons are tightly bound to the nuclei. (option d)

In a good insulator, electrons are tightly bound to the nuclei of their atoms. This means that they are not free to move around within the material, unlike conductors where electrons are relatively loosely bound and can move freely. Due to this strong binding, electrons in insulating materials cannot carry an electric charge or energy easily from one atom to another.

When an electric field is applied to an insulator, the electrons may experience a small displacement within their respective atoms, but they generally do not move from one atom to another or flow through the material like they would in a conductor. As a result, insulators prevent the flow of electric current and are used to isolate or protect conductive elements from accidental contact.

So, the correct answer is D. Electrons are tightly bound to the nuclei.

To know more about insulator here

https://brainly.com/question/2619275

#SPJ6

A torque of 36.5 N · m is applied to an initially motionless wheel which rotates around a fixed axis. This torque is the result of a directed force combined with a friction force. As a result of the applied torque the angular speed of the wheel increases from 0 to 10.3 rad/s. After 6.10 s the directed force is removed, and the wheel comes to rest 60.6 s later.
(a) What is the wheel's moment of inertia (in kg m2)? kg m
(b) What is the magnitude of the torque caused by friction (in N m)? N m
(c) From the time the directed force is initially applied, how many revolutions does the wheel go through?
______ revolutions

Answers

Answer:

[tex]21.6\ \text{kg m}^2[/tex]

[tex]3.672\ \text{Nm}[/tex]

[tex]54.66\ \text{revolutions}[/tex]

Explanation:

[tex]\tau[/tex] = Torque = 36.5 Nm

[tex]\omega_i[/tex] = Initial angular velocity = 0

[tex]\omega_f[/tex] = Final angular velocity = 10.3 rad/s

t = Time = 6.1 s

I = Moment of inertia

From the kinematic equations of linear motion we have

[tex]\omega_f=\omega_i+\alpha_1 t\\\Rightarrow \alpha_1=\dfrac{\omega_f-\omega_i}{t}\\\Rightarrow \alpha_1=\dfrac{10.3-0}{6.1}\\\Rightarrow \alpha_1=1.69\ \text{rad/s}^2[/tex]

Torque is given by

[tex]\tau=I\alpha_1\\\Rightarrow I=\dfrac{\tau}{\alpha_1}\\\Rightarrow I=\dfrac{36.5}{1.69}\\\Rightarrow I=21.6\ \text{kg m}^2[/tex]

The wheel's moment of inertia is [tex]21.6\ \text{kg m}^2[/tex]

t = 60.6 s

[tex]\omega_i[/tex] = 10.3 rad/s

[tex]\omega_f[/tex] = 0

[tex]\alpha_2=\dfrac{0-10.3}{60.6}\\\Rightarrow \alpha_1=-0.17\ \text{rad/s}^2[/tex]

Frictional torque is given by

[tex]\tau_f=I\alpha_2\\\Rightarrow \tau_f=21.6\times -0.17\\\Rightarrow \tau=-3.672\ \text{Nm}[/tex]

The magnitude of the torque caused by friction is [tex]3.672\ \text{Nm}[/tex]

Speeding up

[tex]\theta_1=0\times t+\dfrac{1}{2}\times 1.69\times 6.1^2\\\Rightarrow \theta_1=31.44\ \text{rad}[/tex]

Slowing down

[tex]\theta_2=10.3\times 60.6+\dfrac{1}{2}\times (-0.17)\times 60.6^2\\\Rightarrow \theta_2=312.03\ \text{rad}[/tex]

Total number of revolutions

[tex]\theta=\theta_1+\theta_2\\\Rightarrow \theta=31.44+312.03=343.47\ \text{rad}[/tex]

[tex]\dfrac{343.47}{2\pi}=54.66\ \text{revolutions}[/tex]

The total number of revolutions the wheel goes through is [tex]54.66\ \text{revolutions}[/tex].

Why must you bend forward when carrying a
heavy load on your back?
1. The gravitational force has decreased.
2. Angular momentum has decreased.
3. The center of gravity has shifted.
4. Inertia has changed.

Answers

Answer:

hi I thinks its number 3

Explanation:

hope you have a nice day

What does a step-up transformer do?
A. It steps up the energy.
B. It steps up the power.
C. It steps up the voltage.
D. It steps up the current.

Answers

C.it steps up the voltage

Medical devices implanted inside the body are often powered using transcutaneous energy transfer (TET), a type of wireless charging using a pair of closely spaced coils. And emf is generated around a coil inside the body by varying the current through a nearby coil outside the body, producing a changing magnetic flux. Calculate the average induced emf, of each 10-turn coil has a radius of 1.50 cm and the current in the external coil varies from its maximum value of 10.0 A to zero in 6.25 x10-6s.

Answers

Answer:

[tex]0.475\ \text{V}[/tex]

Explanation:

n = Number of turns = 10

r = Radius = 1.5 cm

I = Current = 10 A

t = Time = [tex]6.25\times 10^{-6}\ \text{s}[/tex]

[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi\times 10^{-7}\ \text{H/m}[/tex]

Magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2r}\\\Rightarrow B=\dfrac{4\pi 10^{-7}\times 10}{2\times 1.5\times 10^{-2}}\\\Rightarrow B=0.00042\ \text{T}[/tex]

EMF is given by

[tex]\varepsilon=\dfrac{nBA}{t}\\\Rightarrow \varepsilon=\dfrac{10\times 0.00042\times \pi (1.5\times 10^{-2})^2}{6.25\times 10^{-6}}\\\Rightarrow \varepsilon=0.475\ \text{V}[/tex]

The average induced emf is [tex]0.475\ \text{V}[/tex].

A simple generator is used to generate a peak output voltage of 23.0 V . The square armature consists of windings that are 5.1 cm on a side and rotates in a field of 0.500 T at a rate of 55.0 rev/s .
How many loops of wire should be wound on the square armature?

Answers

Answer: 51

Explanation:

Given

Output is 23 V

The square armature side is [tex]a=5.1\ cm[/tex]

Magnetic field [tex]B=0.5\T[/tex]

Rate of revolution [tex]n=55\ rev/s[/tex]

Angular speed

[tex]\omega =2\pi n\\\omega=2\pi \times 55=110\pi\ rad/s[/tex]

Peak voltage is given by

[tex]E_{peak}=NB\omega A\quad [\text{N=Number of windings; A=area of cross-section}]\\\\N=\dfrac{E_{peak}}{B\omega A}\\\\N=\dfrac{23}{0.5\times 110\pi\times (0.051)^2}\approx 51[/tex]

So, there are approximate 51 loops

What is the mass of a mallard duck whose speed is 9.1 m/s and whose momentum has a magnitude of 12 kg⋅m/s?

Answers

Answer:

m = 1.31 kg

Explanation:

Given that,

The speed of duck, v = 9.1 m/s

The magnitude of momentum, p = 12 kg-m/s

We need to find the mass of the duck. We know that the momentum of an object is given by :

p = mv

Where

m is the mass of the duck

[tex]m=\dfrac{p}{v}\\\\m=\dfrac{12\ kg-m/s}{9.1\ m/s}\\\\m=1.31 kg[/tex]

So, the mass of the duck is equal to 1.31 kg.

Acellus
A motion sensor emits sound, and
detects an echo 0.0115 s after. A
short time later, it again emits a
sound, and hears an echo after
0.0183 s. How far has the
reflecting object moved?
Help Resources
(Speed of sound = 343 m/s)
(Unit = m)

Answers

Answer:

1.17m

Explanation:

The formula to find distance is d=vt/2

This problem is asking for how far the reflecting object has moved so you need to find the distance from the motion sensor at both times.

(343)(0.115) / (2) = 1.97

(343)(0.0183) /(2) =3.14

After that, all you have to do is find the difference so

3.14 - 1.97

= 1.17

Scroll over the answer choices to see the images. Choose all of the true statements concerning the corresponding image
The picture depicts an electric motor which turns electrical energy into mechanical energy.
The picture depicts a generator which turns electrical energy into mechanical energy
A series circuit is a good example of an electromagnet
F more wite is wound around this iron mail, the strength of the electromagnetic is increased
This image devices that the direction of the magnetic field does not depend on the direction of the current
Flow of electron |

Answers

Answer:

Explanation:

I jus did it on usatestprep

Determiner l'interfrange i sur le plan d'observation π distant de L de D:
Determine the interfringe i on the observation plane π distant from L from D:
1) pour D=f
if D=f
2)pour D=2f
if D=2f

Answers

Answer:

can you explain in Hindi language

because i learn hindi

Question 8: Unspooling Thread (100 points) A 110 g spool of thread with a 4.2 cm radius is held up by a peg through its center and allowed to freely rotate. Assume the thread is ideal (i.e., it does not stretch or slip, and its mass is negligibly small). A 160 g needle is tied to the loose end of the thread. The needle is dropped, and it accelerates to the floor as the thread unwinds. Find the tension in the thread and the magnitude of the acceleration of the needle as it falls.

Answers

Answer:

   a = 7.29 m / s²,      T = 0.40 N

Explanation:

To solve this exercise we must apply Newton's second law to each body

The needle

              W -T = m a

              mg - T = ma

The spool, which we will approach by a cylinder

             Σ τ = I α

             T R = I α

the moment of inertia of a cylinder with an axis through its center is

             I = ½ M R²

angular and linear variables are related

            a = α R

            α = a / R

we substitute

           T R = (½ M R²) a / R

            T = ½ M a

we write our system of equations together

              mg - T = m a

                      T = ½ M a

we solve

              m g = (m + ½ M) a

              a = [tex]\frac{m}{m + \frac{1}{2} M} \ g[/tex]

let's calculate

              a = [tex]\frac{0.160}{0.160 + \frac{1}{2} 0.110} \ 9.8[/tex]

              a = 7.29 m / s²

now we can look for the tension

              T = ½ M a

              T = ½ 0.110 7.29

               T = 0.40 N

Which one of the statements below is true about mechanical waves?

They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.

Answers

Answer:

D) Mechanical waves require a medium for transmission (wire, air, etc.) as opposed to electromagnetic which travel through empty space - light, radio, etc.)

A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of:_____.
a. 4d.
b. 16d.
c. 2d.
d. 8d.

Answers

Answer:

A. 4d

Explanation:

Let's begin with the formula for the magnetic field produced by a long wire.

[tex]B = \frac{\mu_0I}{2\pi d}[/tex]

So [tex]d=\frac{\mu_0 I}{2\pi B }[/tex]

at point d_{1} is

[tex]d_{1}=\frac{\mu_{0} i}{2 \pi B_{1}} \\ \frac{d_{1}}{d}=\frac{\frac{\mu_{0} i}{2 \pi B_{1}}}{\frac{\mu_{0} i}{2 \pi B}} \\ d_{2}=d\left(\frac{B}{B}\right) \\ =d\left(\frac{20 \mathrm{mT}}{5 \mathrm{mT}}\right) \\ =4 d[/tex]

Hence, option  (A) is correct answer

Frequency more than 20,000 HZ​

Answers

Answer:

dvhd

Explanation:

xhxjjdvcbxhjddvifidid

Answer:

The units of frequency are called hertz (Hz). Humans with normal hearing can hear sounds between 20 Hz and 20,000 Hz. Frequencies above 20,000 Hz are known as ultrasound

PROJECT: VIRTUAL LABS — CIRCUITS

Answers

Stop with that link need to stop

Answer:

Table A

Measuring Current as a Function of Voltage with a 20 Ω Resistor

Voltage

(V)

Current: Calculated

(A)

Current: Experimental

(A)

1 0.05 0.05

5 0.25 0.25

10 0.50 0.50

20 1.00 1.00

50 2.50 2.50

Table B

Measuring Current as a Function of Resistance at 25 V

Resistance

(Ω)

Current: Calculated

(A)

Current: Experimental

(A)

10 2.50 2.50

20 1.25 1.25

100 0.25 0.25

200 0.12 0.12

Table C

Measuring Current in a Parallel Circuit

Resistor Set

(Ω)

Total  

Resistance

(Ω)

Calculated

Current

(A)

Observed  

Current

(A)

Observed Current  

through Each Resistor

(A)

20, 20, 20 6.67 3.75 3.74 1.25, 1.25, 1.25

20, 20, 200 9.52 2.63 2.62 1.25, 1.25, 0.12

Voltage needed to raise current to 3.75 A (20, 20, 200 resistor set):

Calculated: 35.7

Observed: 36

Table D

Calculating Power of Circuit ComponentsTeacher Guide (continued)

Observed Total Current

(A)

Current through Each Bulb

(A)

Power Usage per Bulb

(W)

2.00 0.67 6.7

Explanation:

got this from the teachers guide

A 3kg horizontal disk of radius 0.2m rotates about its center with an angular velocity of 50rad/s. The edge of the horizontal disk is placed in contact with a wall, and the disk comes to rest after 10s. Which of the following situations associated with linear impulse is analogous to the angular impulse that is described?

a. A 3kg block is initially at rest. An applied force of 3N is applied to the block, but the block does not move.
b. A 3kg block is initially at rest. A net force of 3N is applied to the block until it has a speed of 10m/s.
c. A 3kg block is initially traveling at 10m/s. An applied force of 3N is applied to the block in the direction of its velocity vector for 10s.
d. A 3kg block is initially traveling at 10m/s. The block encounters a 3N frictional force until the block eventually stops.

Answers

Answer:

D

Explanation:

From the information given:

The angular speed for the block [tex]\omega = 50 \ rad/s[/tex]

Disk radius (r) = 0.2 m

The block Initial velocity is:

[tex]v = r \omega \\ \\ v = (0.2 \times 50) \\ \\ v= 10 \ m/s[/tex]

Change in the block's angular speed is:

[tex]\Delta _{\omega} = \omega - 0 \\ \\ = 50 \ rad/s[/tex]

However, on the disk, moment of inertIa is:

[tex]I= mr^2 \\ \\ I = (3 \times 0.2^2) \\ \\ I = 0.12 \ kgm^2[/tex]

The time t = 10s

Frictional torques by the wall on the disk is:

[tex]T = I \times (\dfrac{\Delta_{\omega}}{t}) \\ \\ = 0.12 \times (\dfrac{50}{10}) \\ \\ =0.6 \ N.m[/tex]

Finally, the frictional force is calculated as:

[tex]F = \dfrac{T}r{}[/tex]

[tex]F= \dfrac{0.6}{0.2} \\ \\ F = 3N[/tex]

What do meteorologists call the lines
that join places with the same
temperature?
A. isobars
B. isotherms
C. anisobars
D. anisotherms

Answers

The answer is B.isotherms

Hydrocarbons are by-products of which of the following:
a. Fossil oils, mines and fossil fuels
b. Burning fires, water treatment plants and fossil oils
C. Combustion in fossil, lighting and exhaust fumes
d. Petrol, sea waves and combustion in vehicles
e. Burning fires and combustion in factories and vehicles​

Answers

Answer:

A

Explanation:

Key word part: hydro - water
I believe the answer is A
Please give me Brainliest

A metal can containing condensed mushroom soup has mass 215 g, height 10.8 cm, and diameter 6.38 cm. It is placed at rest on its side at the top of a 3.00 m long incline that is at 25.0 degrees to the horizontal, and it is then released to roll straight down. Assuming mechanical energy conservation, calculate the moment of inertia of the can if it takes 1.50 s to reach the bottom of the incline. Which pieces of data, if any, are unnecessary for calculating the solution

Answers

Answer:

I = 1.093 x 10⁻⁴ kg.m²

Here, all the other data, namely, the height of the can, length of the inclined plane, angle of inclination, time to reach the bottom, are unnecessary.

Explanation:

The can which is filled with the soup can be modelled as a solid cylinder. The moment of inertia of this solid cylinder about its axis of rotation can be given by the following formula:

[tex]I = \frac{1}{2}mr^2[/tex]

where,

I = moment of inertia of can = ?

m = mass of can with soup = 215 g = 0.215 kg

r = radius of can = diameter/2 = 6.38 cm/2 = 3.19 cm = 0.0319 m

Therefore,

[tex]I = \frac{1}{2}(0.215\ kg)(0.0319\ m)^2 \\[/tex]

I = 1.093 x 10⁻⁴ kg.m²

Here, all the other data, namely, the height of the can, length of the inclined plane, angle of inclination, time to reach the bottom, are unnecessary.

Which one of the following statements is not true of free falling object

Answers

Answer:

FORCE as for my answer....

What is the height of a copper cylinder ( ρCu = 8.96 gcm-3) of diameter 10 cm with a mass of 10 kg ?

Answers

Answer:

h=0.142m=14.2cm

Explanation:

ρ=8.96 g/cm3=8960 kg/m3

d=0.1m

ρ=m/V - - >ρ=m/[π*((d/2)^2) *h] - - >

8960=10/[π*((0.1)^2) *h] - - >

h=0.142m

Does latitude has an effect on weight? PLEASE HELP!​

Answers

Answer:

yes

it does you weigh less on the equator than at the North or South Pole, but the difference is small. Note that your body itself does not change. Rather it is the force of gravity and other forces that change as you approach the poles. These forces change right back when you return to your original latitude.

Yes................

PLEASE HELP! I'LL GIVE BRAINLEST​

Answers

Answer:

In this conversation the Neil astronaut is right

What is the difference between a positively and negatively charged object?

Answers

Answer:

Positively charged objects have electrons; they simply possess more protons than electrons. Negatively charged objects have protons; it's just their number of electrons is greater than their number of protons.

The difference between a positively charged object and a negatively charged object is the number of protons and electrons. The imbalance in charge results into formation of charged objects.

What are Charged objects?

Charged objects have an imbalance of charge that is either more negative electrons than the positive protons or more positive protons than the negative electrons in the object. The neutral objects are those species which have a balance of charge with equal number of protons and electrons.

A positively charged object is formed when an atom has more protons than electrons. And, a negatively charged object is formed when an atom has more electrons than protons. As, electrons have a negative charge and protons have a positive charge.

Learn more about Charged objects here:

https://brainly.com/question/535279

#SPJ6

Other Questions
According to Confucius, ___ is the "building block" of society. A store owner kept track of how many t-shirts were sold last month. The store sold 28 blue t-shirts, 42 green t-shirts, and 56 white t-shirts. Based onthis data, what is the probability that the next customer will buy a green t-shirt?A .33B.4250D) .84HELPPP PLZZZ ANSWER HURRY 25 POINTS Which best describes the Battle of Trenton? It was the turning point in the war. Tactically important It raised the morale of the army. Completely unimportant Suppose Jon is Kayla's boss. Thus, in this relationship, Kayla is the agent. In the course of her employment, Jon gives Kayla unlawful instructions to commit tax fraud for the company's finances. In this situation, _______________________. multiple choice the agent is required to follow the instruction due to the duty of obedience the agent is required to notify the EPA about the principal the agent is required to follow this instruction due to the duty of accounting the agent is not required to follow this instruction the agent is required to follow the instruction due to the duty of loyalty You are attending a training session on the principles that will help you do a better job of managing a new company-wide diversity program.. You are going through an exercise in which you are given two statements and asked to pick the one that effectively illustrates one of these principles. Here is one set of statements: Statement 1 Remember to keep looking for the ideal candidate for a position. Settling for an applicant that lacks all the skills necessary to perform a job, but adds to the diversity of your workforce, is not ideal. Statement 2You will be better able to increase the diversity of your workforce if you interview candidates with entry-level experience even though it might be ideal to hire someone with years of experience. You should choose statement _________as the more appropriate strategy for managing diversity, since it is an example of_________. You were unable td Statement 1 e training, but your coworker has offered to fill you in on the details that you missed. Identify which of the following statements your coworer to indicate as diversity principles discussed during your absence.a. Surface-level diversity should not be treated as more important than deep-level diversity b. Do not lower hiring standards to promote diversity in the workplace c. Keep trying to accomplish as much as possible, even if implementing the diversity program becomes difficult. dar el permetro de un crculo con dimetro de 8.dar el area de un crculo dado el radio de 12 PLZ HElP CORRECLY PLZ ON THIS RIGHT NOW> Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.Online Content: Site 1Traditionally, why did Maori men wear Ta moko? (Site 1) Helppp meeee pleaseeeeee please help, thanks in advance :)) Laurie needs at least 40 pounds of topsoil for a new flower bed. Each bag of topsoil is 200 ounces. Laurie determines that if she buys 3 bags of topsoil she will have enough for the flower bed. Is Laurie correct? Why or why not? People always admire this picture Which of the following can be determined by this diagram A. The energy of the mongoose is passed on to the hare B. The cheetah supplies energy to a variety of organisms C. The Energy of the Acacia tree is passed to the impalaD. The aardvark ,pangolin , and mongoose are all producers PLEASE HELP!!! Approximate one of the solutions to the system of equations graphed below? PLEASE HELP I LITERALLY CAN'TWhat volume does 1 mol of Ar(g) occupy at 25 C and 100 kPa?a) 24.8 L b) 1.0 L c) 22.4 L d) 40.0 L What volume is occupied by 1 mol of Cl2(g) at SATP?a) 12.4 L b) 11.2 Lc) 22.4 L d) 24.8 L An art teacher is making packages of paintbrushes and plant for his students.He has 24 brushes and 40 tubes of paint. Each package will have the same numberof brushes and the same number of tubes of paint.a. What is the greatest number of packages that the art teacher can make usingall the paintbrushes and paint? Show your work. Which policy would most likely decrease a city's gasoline use? Read the following sentence:Between the upcoming vacation, my sister's new baby, and my new project at work, I can barely sleep!Which attitude does the narrator most likely have, based on the sentence?A. He is excited about the new developments in his life.B. He is frustrated with too many responsibilities.C. He is nervous about failing in his obligations.D. He is nervous about the events in his life. The brown-colored bones in each animal help to connect their limbs to a specific joint in the torso, or middle of their body. What type of structure do these bones represent, and what is their significance in terms of evolutionary relationships? Darry has to explain to the doctors that Johnny's family doesn't care and the greasers are his family. Why does he do this?