The total mechanical energy of the apple is of a 0.100-kilogram apple hangs in a tree 1.50 meters above the ground. Ignoring frictional effects, the total mechanical energy of the apple is 1.47 J (joules)
To find the total mechanical energy, we need to consider both the potential energy and kinetic energy of the apple. Since the apple is not moving, its kinetic energy is zero. However, it does have gravitational potential energy due to its height above the ground. The formula for gravitational potential energy is:
PE = mgh
where m is the mass of the object (0.100 kg), g is the acceleration due to gravity [tex](9.81 m/s^{2})[/tex], and h is the height above the ground (1.50 m).
Plugging in these values, we get:
[tex]PE = (0.100 kg)(9.81 m/s^{2})(1.50 m)[/tex]
= 1.47 J
Therefore, the total mechanical energy of the apple is 1.47 J.
In summary, the total mechanical energy of the apple hanging in the tree is 1.47 J, which is solely due to its gravitational potential energy.
For more information on potential energy kindly visit to
https://brainly.com/question/3067704
#SPJ11
Drag the pendulum to an angle (with respect to the vertical) of 90â, and then release it.
With the pendulum swinging back and forth, where is the tension equal to zero?
The tension is zero at the angles+90â andâ90â.
The tension is zero when the angle is +45â and â45â.
The tension is zero when the angle is 0â.
The tension is never zero.
The tension is zero when the pendulum is at its highest point (90 degrees with respect to the vertical) and at its lowest point (also 90 degrees with respect to the vertical).
Therefore, the correct answer is: The tension is zero at the angles +90 degrees and -90 degrees.
The tension is never zero.
When a pendulum is swinging, the tension in the string or rod will always be present as it supports the weight of the pendulum bob and provides the centripetal force required for the swinging motion. The tension will be the least when the pendulum is at its lowest point (angle = 0°), but it will never be equal to zero.
To know more about Pendulum click here .
brainly.com/question/14759840
#SPJ11
A horizontal force F is used to pull a 5-kilogram block across afloor at a constant speed of 3 meters per second. The frictionalforce between the block and the floor is 10 newtons. The work doneby the force F in 1 minute is most nearlyA. 0 JB. 30 JC. 600 JD. 1350 JE. 1800 J
The horizontal we need to use the formula for work done, which is Work = Force x Distance x cos theta in this case, the distance is not given, but we know that the block is moving at a constant speed of 3 meters per second. Distance = Speed x Time. Distance = 3 m/s x 60 s = 180 m
The time given is 1 minute, which is 60 seconds, Distance = 3 m/s x 60 s = 180 m Now we can calculate the work done by the force Of Work = F x Distance x cos theta Since the force is horizontal and the displacement is also horizontal, the angle between them is 0 degrees and cos0 = 1. Work = F x Distance We need to find the value of F. Since the block is moving at a constant speed, the force applied by F must be equal and opposite to the frictional force F = frictional force = 10 N Now we can substitute the values Work = 10 N x 180 m = 1800 J the answer is (E) 1800 J.
learn more about horizontal here.
https://brainly.com/question/30004581
#SPJ11
In 1828, the diameter of the U.S. dime was changed to approximately 18 mm. What isthis diameter when expressed in nanometers?A) 1.8 × 109 nm D) 1.8 × 10-5 nmB) 1.8 × 107 nm E) 1.8 × 10-10 nmC) 1.8 × 101 nm
The diameter of the U.S. dime when expressed in nanometers is 1.8 x 10^7 nm, which corresponds to option B).
The diameter of an object is the distance across the object passing through its center, measured in units such as millimeters (mm), centimeters (cm), or meters (m). In the case of the U.S. dime, the diameter was changed to approximately 18 mm in 1828.
To convert this diameter to nanometers (nm), we need to use the conversion factor that relates millimeters to nanometers. One millimeter is equal to one million nanometers (1 mm = 1,000,000 nm).
So, to convert 18 mm to nanometers, we can multiply 18 by 1,000,000 as follows:
18 mm * 1,000,000 nm/mm = 18,000,000 nm
Therefore, the diameter of the U.S. dime when expressed in nanometers is 1.8 x 10^7 nm, which corresponds to option B).
Visit to know more about Diameter:-
brainly.com/question/23220731
#SPJ11
Which of the following decreases the chances of a mass movement?
A. All of the possible answers are correct.
B. pumping or draining water out of the ground along a slope
C. redistributing the mass on a slope by terracing
D. planting vegetation on slopes
All of the possible answers are correct. Pumping or draining water out of the ground along a slope can reduce the chances of a mass movement by decreasing the amount of water pressure that is pushing against the slope.
What is water pressure?Water pressure is the force that water exerts on the walls of pipes and containers when it is confined and forced to move. Water pressure is generated by the weight of the water above the point of measurement and is measured in pounds per square inch (psi). The higher the water pressure, the harder it is to move the water. High water pressure can cause plumbing problems, such as leaks and bursts. Low water pressure can lead to inadequate water flow and lack of pressure in showers and taps.
Redistributing the mass on a slope by terracing can create a more stable surface and reduce the chances of a mass movement. Planting vegetation on slopes can help retain moisture and reduce erosion, thus decreasing the chances of a mass movement.
To learn more about water pressure
https://brainly.com/question/30587466
#SPJ4
What is the ampacity of four current-carrying No. 8 THHN conductors installed in ambient temperature of 100 degrees F?
Therefore, the ampacity of four current-carrying No. 8 THHN conductors installed in an ambient temperature of 100 degrees F is approximately 45.5 amps per conductor. The ampacity of four current-carrying No. 8 THHN conductors installed in an ambient temperature of 100 degrees F is determined by referring to the National Electrical Code (NEC) table 310.15(B)(16). For No. 8
THHN conductors, the base ampacity is 50 amps at 30°C (86°F). However, since the ambient temperature is 100°F, we need to apply a temperature correction factor.
For THHN insulation with a 90°C rating, the temperature correction factor at 100°F (38°C) is approximately 0.91. To calculate the adjusted ampacity, multiply the base ampacity by the temperature correction factor:
Adjusted Ampacity = Base Ampacity × Temperature Correction Factor
Adjusted Ampacity = 50 amps × 0.91
Adjusted Ampacity ≈ 45.5 amps
Therefore, the ampacity of four current-carrying No. 8 THHN conductors installed in an ambient temperature of 100 degrees F is approximately 45.5 amps per conductor.
To know more about National Electrical Code click here:
https://brainly.com/question/17215290
#SPJ11
Question 14
HAZWOPER requirements apply to a. voluntary clean-ups at uncontrolled hazardous waste sites
b. routine sanitary sewer operations
c. small quantity generators of hazardous waste
d. water treatment plant operators
HAZWOPER requirements apply to voluntary clean-ups at uncontrolled hazardous waste sites.
Therefore the answer is a. voluntary clean-ups at uncontrolled hazardous waste sites
This is because HAZWOPER (Hazardous Waste Operations and Emergency Response) is a set of regulations established by OSHA (Occupational Safety and Health Administration) to protect workers who are involved in hazardous waste operations and emergency response. These regulations apply to workers who are involved in the cleanup, treatment, storage, and disposal of hazardous waste, as well as those who are involved in emergency response activities.
Voluntary clean-ups at uncontrolled hazardous waste sites fall under the scope of HAZWOPER because they involve the handling of hazardous substances and the potential for exposure to harmful chemicals and materials. The other options, routine sanitary sewer operations, small quantity generators of hazardous waste, and water treatment plant operators, may involve some level of exposure to hazardous substances, but they do not necessarily fall under the scope of HAZWOPER.
To know more on HAZWOPER
https://brainly.com/question/28038347
#SPJ4
A train car, which has a mass of 2500 kg, is rolling along with a speed of 14 m/s. It strikes a stationary (not moving) train car, which also has a mass of 2500 kg, and they stick together. What is their combined speed after the collision?
Answer:
7m/s
Explanation:
The formula for inelastic collisions is m1*v1 + m2*v2 = (m1+m2)*vf. From this question, we are given m1 = 2500kg, v1 = 14m/s, m2 = 2500 kg, v2 = 0 m/s. Plugging all this into the above equation gets 2500 * 14 = 5000 * vf. Solving that gets vf = 7m/s.
Answer:
v = 7 m/s
Explanation:
Momentum of the first train car before = mass of the first train car x velocity of the first train car
= 2500 kg x 14 m/s
= 35000 kg·m/s
Momentum of the second train car before = mass of the second train car x velocity of the second train car
= 2500 kg x 0 m/s
= 0 kg·m/s
Total momentum before = Momentum of the first train car before + Momentum of the second train car before
= 35000 kg·m/s + 0 kg·m/s
= 35000 kg·m/s
Total mass after = mass of the first train car + mass of the second train car
= 2500 kg + 2500 kg
= 5000 kg
Total momentum before = Total momentum after
35000 kg·m/s = 5000 kg x v
v = 35000 kg·m/s / 5000 kg
v = 7 m/s
According to Newton's law of universal gravitation, when the distance between two masses is increased by a factor or 3, the attractive gravitational force between them is
According to Newton's law of universal gravitation, when the distance between two masses is increased by a factor of 3, the attractive gravitational force between them is decreased by a factor of 9 (3 squared).
This means that the force decreases exponentially as the distance between the masses increases.
According to Newton's law of universal gravitation, when the distance between two masses is increased by a factor of 3, the attractive gravitational force between them is decreased by a factor of 9 (3²).
This is because the gravitational force is inversely proportional to the square of the distance between the masses.
To know more about Newton's Law click here .
brainly.com/question/15280051
#SPJ11
21. What is the tangential speed of Nairobi, Kenya, a city near the equator? The earth makes one revolution every 23.93 h and has an equatorial radius of 6380 km.
A) 74.0 m/s
B) 116 m/s
C) 148 m/s
D) 232 m/s
E) 465 m/s
The tangential speed of Nairobi, Kenya, near the equator is approximately 465 m/s .
To calculate the tangential speed of Nairobi, Kenya, which is a city near the equator, we will use the following formula:
Tangential speed (v) = 2 × π × radius (r) / time period (T)
Here, the equatorial radius of the Earth (r) is 6,380 km (which we need to convert to meters), and the Earth completes one revolution in 23.93 hours (which we need to convert to seconds).
1. Convert the radius to meters:
r = 6,380 km * 1,000 m/km = 6,380,000 m
2. Convert the time period to seconds:
T = 23.93 hours * 60 min/hour * 60 s/min = 86,078.8 s
3. Calculate the tangential speed:
v = (2 × π × 6,380,000 m) / 86,078.8 s ≈ 465 m/s
So, the tangential speed of Nairobi, Kenya, near the equator is approximately 465 m/s. The correct answer is E) 465 m/s.
learn more about tangential speed Refer: https://brainly.com/question/17689540
#SPJ11
an electron with rest mass energy of 0.511 mev travels at a speed of 0.5c. what is its kinetic energy?
An electron with a rest mass energy of 0.511 MeV traveling at a speed of 0.5c (where c is the speed of light) has a kinetic energy given by the relativistic kinetic energy formula:
K.E. = (γ - 1)mc^2
where γ (gamma) is the Lorentz factor, m is the mass of the electron, and c is the speed of light.
First, calculate the Lorentz factor using the formula:
γ = 1 / √(1 - v^2/c^2)
For v = 0.5c, γ = 1 / √(1 - (0.5c)^2/c^2) = 1 / √(1 - 0.25) = 1 / √(0.75) ≈ 1.155
Now, calculate the kinetic energy:
K.E. ≈ (1.155 - 1)(0.511 MeV) ≈ 0.155 * 0.511 MeV ≈ 0.079 MeV
Thus, the kinetic energy of the electron traveling at 0.5c is approximately 0.079 MeV.
Learn more about Lorentz factor here:
https://brainly.com/question/24568887
#SPJ11
The kinetic energy of an electron can be calculated using the formula:
KE = (γ - 1) * m0 * c^2
where γ is the Lorentz factor, m0 is the rest mass of the electron, and c is the speed of light.
The Lorentz factor is given by:
γ = 1 / sqrt(1 - v^2/c^2)
where v is the velocity of the electron.
In this case, the rest mass energy of the electron is 0.511 MeV, which is equivalent to 0.511 * 10^6 electron volts (eV).
The speed of the electron is 0.5c, where c is the speed of light.
So, we can first calculate the Lorentz factor:
γ = 1 / sqrt(1 - (0.5c)^2/c^2)
γ = 1 / sqrt(1 - 0.25)
γ = 1.1547
Next, we can calculate the kinetic energy:
KE = (γ - 1) * m0 * c^2
KE = (1.1547 - 1) * 0.511 * 10^6 eV
KE = 0.1547 * 0.511 * 10^6 eV
KE = 78,983.7 eV
Therefore, the kinetic energy of the electron is approximately 78,983.7 electron volts (eV).
To know more about kinetic energy of an electron :
https://brainly.com/question/30544790
#SPJ11
possibly driven by acceleration from the snapping (breaking) of magnetic fields near the sun's surface.
Your question is about acceleration possibly driven by the snapping of magnetic fields near the sun's surface.
The acceleration you mentioned is likely related to solar flares, which are powerful bursts of energy caused by the snapping and reconnection of magnetic fields near the sun's surface.
Solar flares occur when magnetic energy built up in the sun's atmosphere is suddenly released, causing a rapid increase in brightness and a powerful burst of radiation.
This process involves the snapping and reconnection of magnetic field lines, which accelerates charged particles and results in the emission of energy across the electromagnetic spectrum. The strength of a solar flare depends on the complexity and intensity of the magnetic field involved.
In summary, the acceleration you referred to is associated with solar flares and is driven by the breaking and reconnection of magnetic fields near the sun's surface.
To know more about electromagnetic spectrum click on below link:
https://brainly.com/question/15576247#
#SPJ11
Acceleration is a term used to describe the increase in speed of an object over time. In the case of solar activity, it is believed that the breaking of magnetic fields near the sun's surface could be a driving force behind this acceleration.
The magnetic field of the sun plays a significant role in the behavior of the sun and its interactions with the solar system. When the magnetic fields on the surface of the sun become twisted or tangled, they can snap and release a tremendous amount of energy in the form of solar flares or coronal mass ejections. These events can send charged particles hurtling toward Earth at incredible speeds. The acceleration of these particles is largely due to the magnetic fields they encounter as they travel through space. These magnetic fields can cause the particles to be deflected or redirected, causing them to move faster or slower depending on the orientation of the magnetic field. In some cases, the particles can be accelerated to nearly the speed of light, creating powerful bursts of energy that can disrupt satellites and other technology. In summary, the breaking of magnetic fields near the sun's surface can drive the acceleration of charged particles, which can then cause disturbances in the solar system. Understanding this process is crucial for predicting and mitigating the effects of solar storms on Earth and other planets in our solar system.
Ledran more about satellites here: https://brainly.com/question/3917046
#SPJ11
An electron moving along the +x-axis enters a magnetic field. Ifthe electron experiences a magnetic deflection in the -y direction, what is the direction of the magnetic field in this region?A) along the +z-axisB) along the -z-axisC) along the -x-axisD) along the +y-axisE) along the -y-axis
The direction of the magnetic field in this region is along the -z-axis (option B).
To determine the direction of the magnetic field when an electron moving along the +x-axis experiences a magnetic deflection in the -y direction, we can use the right-hand rule.
1: Point your thumb in the direction of the electron's motion, which is along the +x-axis.
2: Point your index finger in the direction of the magnetic force experienced by the electron, which is in the -y direction.
3: Your middle finger will point in the direction of the magnetic field.
Following these steps, your middle finger will point along the -z-axis.
You can learn more about the magnetic field at: brainly.com/question/11514007
#SPJ11
A group of stars that form a pattern are called a constellation. This pattern of stars
A happens accidentally and is only visible once per year
B stays together and seems to move as a unit. C stays together for a short time because stars are moving. D has been and will always be this way
A group of stars that form a pattern are called a constellation. This pattern of stars (B) stays together and seems to move as a unit is the correct option, because Asterism is the name for a collection of stars that form a pattern.
It is also known as a constellation, and astronomers use the phrase to describe a region of the sky. An area of the celestial sphere known as a constellation is one in which a collection of discernible stars appears to create a pattern or outline, generally resembling an animal, mythological figure, or inanimate object.
The first constellations probably have their origins in prehistoric times. They were used by people to share tales about their beliefs, encounters, creations, or mythology. Before the current constellations were acknowledged worldwide, various cultures and nations adopted their own constellations, some of which persisted into the first decade of the 20th century. Over time, there have been substantial changes in how constellations are recognised. Many had size or shape changes. Some gained popularity,
Therefore, the correct option is (B).
To know more about constellation
https://brainly.com/question/16724540
#SPJ4
in a two-way anova test, the sum of squares for factor b is based on the sum of the squared differences between the mean for each level of factor b and the
In a two-way ANOVA test, the sum of squares for factor B is based on the sum of the squared differences between the mean for each level of factor B and the overall grand mean. This helps to determine the impact of factor B on the dependent variable while accounting for factor A.
This sum of squares is used to calculate the F-statistic, which helps determine if there is a significant difference between the means of the different levels of factor b.
The sum of squares for factor B is calculated as follows:
SSB = Σ [(Yi•. - Y..)² / (a•.)]
where:
Yi•. is the mean of the response variable for level i of factor B
Y.. is the overall mean of the response variable
a is the number of levels of factor A
The sum of squares for factor b is also used to calculate the total sum of squares for the entire model, which includes both factor a and factor b, and the residual sum of squares, which is the sum of the squared differences between the observed data and the predicted values from the model.
Learn more about ANOVA Test here:
https://brainly.com/question/30127764
#SPJ11
Frequency scaling was replaced by core scaling due to power density concerns.true/false
True. Frequency scaling refers to increasing the clock speed of a processor to improve its performance.
However, as the frequency increases, the power consumption and heat generated by the processor also increase. This can lead to concerns about power density, which is the amount of power per unit area. To address these concerns, core scaling has become a more popular approach to improving processor performance. This involves adding more processor cores to a chip, rather than simply increasing the frequency of a single core. This allows for better performance while keeping power density under control.
learn more about frequency Refer: https://brainly.com/question/30783512
#SPJ11
magine that you took a road trip. Based on the information in the table, what was the average speed of your car?
Time Mile marker
3:00 pm 32
8:00 pm 155
Imagine that you took a road trip. Based on the information in the table, what was the average speed of your car? 195 Time Mile marker 3:00 pm 28 8:00 pm Express your answer to three significant figures and include the appropriate units.
Based on the information in the table, we can calculate the total distance traveled by subtracting the initial mile marker from the final mile marker. 155 32 123 miles We can calculate the total time traveled by subtracting the starting time from the ending time. 8:00 pm 3:00 pm 5 hours to find the average speed, we can divide the total distance traveled by the total time traveled. 123 miles 5 hours 24.6 miles per hour Therefore, the average speed of the car during the road trip was 24.6 miles per hour.
learn more about Based here
https://brainly.com/question/8617708
#SPJ11
(250-172) Cases or frames of instrument transformers are not required to be grounded when accessible to qualified persons only or for current transformers where the primary is not over 150 volts to ground and which are used exclusively to supply current to meters.(True/False)
The statement is referring to the grounding requirements for cases or frames of instrument transformers. The statement is true.
The statement is referring to the grounding requirements for cases or frames of instrument transformers. In general, cases or frames of instrument transformers are required to be grounded to provide a safety path for fault currents and to prevent electrical shock to personnel. However, there are exceptions to this requirement.
According to the National Electrical Code (NEC) 250.172, cases or frames of instrument transformers are not required to be grounded under certain conditions. One of these conditions is when the cases or frames are accessible only to qualified persons. This means that the cases or frames are located in an area that is restricted to authorized personnel who have the knowledge and training necessary to work safely with electrical equipment.
Another condition under which cases or frames of instrument transformers are not required to be grounded is when they are used exclusively to supply current to meters and the primary voltage is not over 150 volts to ground. In this case, the risk of electrical shock is considered low because the voltage is relatively low and the current is limited to the metering circuit.
It is important to note that these exceptions apply only to cases or frames of instrument transformers, and not to other types of electrical equipment. Also, even when cases or frames of instrument transformers are not required to be grounded, it is still a good practice to ground them for added safety.
Visit to know more about Transformer:-
brainly.com/question/29665451
#SPJ11
What size equipment grounding conductor is required in each of two raceways for a 600 ampere feeder?(Table 250.122)
According to Table 250.122, for a 600 ampere feeder, a minimum size of 3/0 AWG equipment grounding conductor is required in each of two raceways.
To determine the size of the equipment grounding conductor required in each of the two raceways for a 600-ampere feeder, refer to Table 250.122 in the National Electrical Code (NEC). According to Table 250.122, for a 600-ampere feeder, the required equipment grounding conductor size is 1/0 AWG. Therefore, you would need a 1/0 AWG equipment grounding conductor in each of the two raceways for a 600-ampere feeder.
The National Electrical Code (NEC) is a set of standards for electrical installation and design that is adopted and enforced by state and local governments in the United States. The NEC is published by the National Fire Protection Association (NFPA), and is updated every three years to reflect new technologies, best practices, and safety considerations.
The NEC covers a wide range of topics related to electrical systems, including the installation and use of wiring, grounding and bonding, electrical equipment and appliances, and electrical safety. The code sets forth requirements and guidelines for electrical installations to help ensure that they are safe, reliable, and in compliance with local building codes and regulations.
Visit here to learn more about National Electrical Code brainly.com/question/17215290
#SPJ11
The most famous prehistoric astronomical observatory is:
The most famous prehistoric astronomical observatory is likely Stonehenge in Wiltshire, England. Located in Wiltshire, England, Stonehenge is an iconic prehistoric monument that served as an astronomical observatory, allowing ancient people to track the movements of the sun, moon, and stars.
This ancient site, constructed over 4,000 years ago, features a circle of standing stones that align with astronomical events such as the solstices and equinoxes. Its purpose and exact use as an observatory is still a topic of debate among historians and archaeologists. Scientists can determine whether or whether the cosmos is expanding, contracting, or remaining static by examining extremely far-off objects. Redshift is the term used to describe this idea.
Learn more about movements here:
brainly.com/question/15446389
#SPJ11
A. How much does a 22 W lightbulb draw when it is plugged directly into a 110 V outlet?
B. What is the internal resistance of the lightbulb?
A. the 22 W lightbulb draws 0.2 A of current when it is plugged directly into a 110 V outlet.
B. the internal resistance of the lightbulb is approximately 550 ohms.
A. The power (P) drawn by an electrical device can be calculated using the equation:
P = V x I
where P is power in watts (W), V is voltage in volts (V), and I is current in amperes (A).
In this case, a 22 W lightbulb is plugged directly into a 110 V outlet. To determine how much current it draws, we can rearrange the equation to solve for I:
I = P / V
Plugging in the values given, we get:
I = 22 W / 110 V = 0.2 A
Therefore, the 22 W lightbulb draws 0.2 A of current when it is plugged directly into a 110 V outlet.
B.
To determine the internal resistance (r) of the lightbulb, we can use Ohm's law:
V = IR + V_internal
where V is the voltage across the lightbulb, I is the current flowing through the lightbulb, r is the internal resistance of the lightbulb, and V_internal is any additional internal voltage drop within the lightbulb.
Since the lightbulb is plugged directly into a 110 V outlet, V is equal to 110 V, and we know from part A that I is 0.2 A. Therefore, we can rewrite the equation as:
110 V = 0.2 A x r + V_internal
To solve for r, we need to know the value of V_internal, which is not given in the problem. However, we can make an assumption that the internal voltage drop is negligible compared to the voltage across the lightbulb, which is often the case for simple resistive devices like lightbulbs.
Assuming V_internal is negligible, the equation simplifies to:
110 V = 0.2 A x r
Solving for r, we get:
r = 110 V / 0.2 A = 550 ohms
Therefore, the internal resistance of the lightbulb is approximately 550 ohms.
learn more about resistance here
https://brainly.com/question/17563681
#SPJ1
4. How much voltage is there across a 100 mH inductor if the current is changing at 10.0 mA/s
1V voltage is there across a 100 mH inductor if the current is changing at 10.0 mA/s
The voltage across an inductor is given by the equation V = L(di/dt), where V is the voltage, L is the inductance, and (di/dt) is the rate of change of current with respect to time.
In this case, the inductance is 100 mH (millihenries), and the current is changing at a rate of 10.0 mA/s (milliamperes per second). Converting the inductance to henries (H), we get L = 0.1 H.
Plugging these values into the equation, we get:
V = L(di/dt) = (0.1 H)(0.010 A/s) = 0.001 V = 1 mV
Therefore, the voltage across the inductor is 1 mV or 0.001 V.
learn more about inductor here:
https://brainly.com/question/15893850
#SPJ11
What is the neutral current for a balanced 16 ampere 3 wire 208Y/120-volt branch circuit of a 4 wire 3 phase wye system that supplies fluorescent lighting?
In a balanced 16 ampere 3 wire 208Y/120-volt branch circuit of a 4 wire 3 phase wye system that supplies fluorescent lighting, the neutral current would be zero. This is because in a balanced system, the current flowing in the hot wires (phases) will be equal and opposite, resulting in no net current flowing in the neutral wire.
However, it is important to note that in an unbalanced system, there may be a neutral current present. Additionally, fluorescent lighting can cause harmonic distortion in the current waveform, which may result in additional neutral current.
In a balanced 16 ampere 3-wire 208Y/120-volt branch circuit of a 4-wire 3-phase wye system supplying fluorescent lighting, the neutral current is 0 amperes. This is because, in a balanced system, the currents in each of the three phases are equal in magnitude and their vector sum is zero, resulting in no current flowing through the neutral wire.
learn more about fluorescent lighting here: brainly.com/question/30267500
#SPJ11
Question 14 Marks: 1 The term "rad" meansChoose one answer. a. required administered dose b. radiation admitted dose c. roentgen absorbed dose d. radiation absorbed dose
The term "RAD" in physics means radiation absorbed dose (option D).
What is radiation absorbed dose?Radiation absorbed dose is one of the two units used to measure the amount of radiation absorbed by an object or person.
RAD reflects the amount of energy that radioactive sources deposit in materials through which they pass.
The radiation-absorbed dose (rad) is the amount of energy (from any type of ionizing radiation) deposited in any medium (e.g., water, tissue, air).
An absorbed dose of 1 rad means that 1 gram of material absorbed 100 ergs of energy (a small but measurable amount) as a result of exposure to radiation.
Learn more about radiation absorbed dose at: https://brainly.com/question/12741652
#SPJ1
10) What are cosmic rays? A) another name for gamma rays and X rays B) fast moving dust particles in the interstellar medium C) subatomic particles that travel close to the speed of light D) lasers used as weapons by extraterrestrials
Cosmic rays are subatomic particles that travel close to the speed of light.
They are high-energy particles that originate from outside our solar system and even outside our galaxy. Cosmic rays can include protons, electrons, and atomic nuclei. They can also include gamma rays, which are a type of electromagnetic radiation similar to X-rays. These particles are mostly made up of a combination of protons, electrons and other atomic nuclei that have been accelerated to extremely high speeds. They travel through space at near the speed of light, and when they enter the Earth's atmosphere, they interact with the molecules in the air and produce showers of secondary particles. Cosmic rays have been found to come from various sources in nature, including supernovae, pulsars, black holes, active galactic nuclei, and even from mysterious dark matter particles.
Learn more about Cosmic rays Refer: https://brainly.com/question/13960192
#SPJ11
Deep-sea minerals are considered to be nonrenewable. Which time frame BEST identifies the time it would take for deep-sea mineral deposits to be replaced if they are significantly reduced by mining activities?
-0-10 years
-20-50 years
-75-100 years
-100+ years
Please hurry it’s a test
The correct answer is "100+ years" because the replacement of these minerals would take a very long time, likely longer than 100 years, even if new deposits are discovered.
When are they replaced?It is currently unknown how long it would take for deep-sea mineral deposits to be replaced if they are significantly reduced by mining activities. Deep-sea minerals are considered non-renewable, which means they form over geological time scales and cannot be replaced within a human lifetime or even many generations.
Deep-sea minerals are considered non-renewable, which means that they cannot be replenished naturally at a rate that meets the current rate of consumption.
Learn more about mining:https://brainly.com/question/30199407
#SPJ1
Is ΔU1→2, the change in potential energy along the path 1→2, larger, smaller, or equal to ΔU1→3?
There is a constant, equal electric field throughout. As a result, potential energy is equal.
Does the electric potential energy rise, fall, or remain constant?To determine whether or not EPE is rising, follow this general guideline: A charge's electric potential energy is decreasing if it is travelling in the direction that it would typically go. A charge's electric potential energy increases if it is pushed in the opposite direction from how it would ordinarily travel.
What is the recipe for conceivable change?When a charge q is transported from point A to point B, the potential difference between the two places is defined as the change in potential energy of the charge divided by the charge, or V = VB - VA. Voltage, also known as potential difference, is denoted by the letter V.
to know more about potential energy here:
brainly.com/question/24284560
#SPJ1
T or F? In order to keep an object in motion a force must be constantly applied.
False. Once an object is in motion in the absence of any external forces, it will remain in motion with the same speed and direction. This is known as the law of inertia, one of Newton's laws of motion.
An external force is required only to change the motion of an object. For example, if a ball is rolling on a frictionless surface, it will continue to roll indefinitely in a straight line with a constant speed if there are no other forces acting on it. However, if a force such as friction or gravity acts on the ball, it will change its motion by slowing down or changing its direction. In such cases, an external force is required to maintain the motion of the object in a specific way. Therefore, the statement is false as an object in motion can remain in motion without the application of a force.
Learn more about external forces here:
https://brainly.com/question/16186958
#SPJ11
unit. weight of beam =. 14. A measuring cylinder contains 60cm³ of water.an iron block 6cm in length is completely immersed in the water and the new reading of the cylinder is found to increase to 81cm³ Calculate the average cross sectional area of the block
The average cross-sectional area of the block is 3.5 cm².
We can start by calculating the volume of the iron block that is submerged in the water. Since the block is 6 cm long and fully submerged, its volume is:
V = A x L
where A is the cross-sectional area of the block and L is its length.
Next, we can use the volume of water displaced by the block to find the volume of the block:
V_block = V_water_displaced
where V_water_displaced is the difference between the final and initial volumes of water in the cylinder:
V_water_displaced = 81 cm³ - 60 cm³
= 21 cm³
Therefore, we have:
A x L = 21 cm³
To find the average cross-sectional area of the block, we need to divide both sides of the equation by the length of the block:
A = 21 cm³ / 6 cm
= 3.5 cm²
Therefore, the average cross-sectional area of the block is 3.5 cm².
Learn more about Cross sectional area at
brainly.com/question/20532494
#SPJ1
(310-15(A)(16) A No. 2 TW conductor is installed in a location where the ambient temperature is expected to be 102F. The temperature correction factor for conductor ampacity in this location is _____.
2 TW conductor is installed in a location where the ambient temperature is expected to be 102F and the temperature correction factor for conductor ampacity in this location is 0.82.
The correction factor depends on the type of insulation, the size of the conductor, the number of current-carrying conductors in a raceway or cable, and the type of installation.
The ability of a conductor to carry current decreases, which can result in potential hazards such as overheating and fire. In the case of the 2 TW conductor installed in a location with an ambient temperature of 102°F, the temperature correction factor of 0.82 indicates that the ampacity of the conductor must be reduced by 18%.
This reduction helps ensure that the conductor is not overloaded and can safely carry the required current without exceeding its maximum temperature rating.
Learn more about conductors at
https://brainly.com/question/6531988
#SPJ4
Question 8 Marks: 1 The direction of operation of a sanitary landfill should beChoose one answer. a. against the prevailing wind b. with the prevailing wind c. perpendicular to the prevailing wind d. changed daily to be perpendicular to the prevailing wind
With the prevailing wind is the direction of operation of a sanitary landfill. This is because landfills produce a significant amount of unpleasant odors and gases such as methane.
This create public health concerns and environmental pollution. The direction of operation should be aligned with the prevailing wind direction, so that the wind can carry the odors and gases away from populated areas and sensitive receptors, such as schools and residential areas. . Modern landfills are engineered with several layers of protective liners, such as clay or synthetic materials, to prevent contaminants from leaching into the surrounding soil and groundwater. Landfills also have systems for collecting and treating leachate, which is the liquid that forms as rainwater percolates through the waste. Methane, which is a potent greenhouse gas, is generated as organic matter in the landfill decomposes. Modern landfills are equipped with gas collection systems that capture methane and other gases and use them to generate electricity or heat. This process, called landfill gas-to-energy, helps to reduce greenhouse gas emissions and provides a source of renewable energy.
Learn more about organic matter here:
https://brainly.com/question/29232090