A 0.28 kg stone you throw rises 34.3 m in the air. The impulse our hand receives from the stone while it throws the stone is 7.3 N.s
What is Impulse?
Impulse can be defined as the sudden force acting on an object for a short interval of time. Conventionally represented by “J”. Sometimes by “imp” and expressed in “N.s”.
Impulse = change in momentum
the stone rises to a height of 34.3m
final velocity of the stone is 0m/s
so applying equation of motion:
V2 - U2 = 2gS ( where S is the height, g is value of gravity )
0 - U2 = 2(-9.8)×34.3
U2 = 672.3
U = √672.3
= 26m/s
so initial velocity is 26m/s.
Impulse = change in momentum
Impulse = mv - mu
= 0 - (0.28× 26)
= - 7.3 N.s
So the impulse our hand receives from the stone while it thrown the stone is 7.3 N.s
learn more about Impulse:
https://brainly.com/question/16980676
#SPJ4
Identify the part of the neuromuscular junction at B: B A Axon Terminal O Dendrites Axon branches O Muscle fiber Identify the structure at A: В. A O muscle fiber dendrites O axon terminals O axon branches
B. the building at A O muscle fibre dendrites O branches and axon terminals. The 'B' structure consists of axon branches and Axon terminals are the structure designated "A."
1). The structure labeled "B" is: Axon branches
-Because a motor neuron's axon has multiple branches that come together to form a neuromuscular junction, one of its axons can innervate numerous muscle fibers.
- These branches carry potential action in the direction of certain synaptic knobs.
2). The structure labeled "A" is: Axon terminals
-It creates a neuromuscular connection with the motor end plate of the sarcolemma and features a bulged structure at its most terminal end.
- Neurotransmitter is exocytosed from the axon terminal.
- Synaptic cleft is the area between the sarcolemma and the synaptic knob at the axon terminal.
Any of the button-like ends of axons through which axons create synaptic connections with other nerve cells or with effector cells is known as an axon terminal. Neurotransmitter-containing synaptic vesicles bind at the axon terminal. The cell opens up to calcium ions upon activation by a graded potential or by an action potential of the presynaptic neuron. This starts a chain reaction that leads to the synaptic vesicles fusing into the axon terminal membrane. The synaptic vesicle proteins that the calcium ions activate create fusion holes that allow the neurotransmitters to leave. The effects of the neurotransmitters on the target cell only last for a brief period of time.
Learn more about Axon terminals here:
https://brainly.com/question/19435017
#SPJ4
which of these is the correct answer
Answer:
Option A sponge because at the first sponge was not so heavy than other but when it was dipped in the bucket of water for 30 minutes it absorbed the water as it has many holes in it and the density of water is 1000Kg per metre cube the weight of water and sponge was high
two drivers make 100-km trips. Driver 1 complets the trip in 2 hours. Driver 2 takes 3 hours but stops for an hour halfway. which driver has a greater average speed? Explane
Answer:
Driver 1
Explanation:
In this scenario, driver 1 has a greater average speed than driver 2. To determine the average speed of a driver, we need to divide the distance traveled by the time it took to travel that distance. In the case of driver 1, who traveled 100 km in 2 hours, their average speed would be 100 km / 2 hours = 50 km/hour. For driver 2, who traveled 100 km in 3 hours but stopped for an hour halfway, their average speed would be 100 km / (3 hours - 1 hour) = 33.33 km/hour. Since 50 km/hour is greater than 33.33 km/hour, driver 1 has a greater average speed.
What is the equation that shows the inverse relationship between wavelength and frequency?
Answer:
V = f * λ velocity equals frequency * wavelength
If f is increased then λ must decrease for the velocity to remain constant.
What does MgBr2 mean?
The chemical formula of Magnesium Bromine MgBr₂.
Magnesium bromide is a chemical compound which is formed by the combination of magnesium and bromine.
The chemical formula of Magnesium Bromine MgBr₂.
The colour of Magnesium Bromine is white and it is a very deliquescent crystalline type solid in nature.
It can be sometimes used as a mild sedative and also we can use is as an anticonvulsant which is commonly used in the treatment of nervous disorders.
It can be easily soluble in water and sometimes it can also be easily dissolved in alcohol.
For more questions on Magnesium bromide
https://brainly.com/question/25947089
#SPJ4
1. How did the rock of the Great Plains and Rocky Mountains form?Choose the claim you can eliminate. ResponsesThey formed as one rock formation, and then something separated them.They formed as one rock formation, and then something separated them.One rock formation formed before the other. Then, the minerals from the older rock became part of the younger rock.One rock formation formed before the other. Then, the minerals from the older rock became part of the younger rock.3What do we still need to know in order to determine why the two rock formations have such similar minerals?Evidence Card E: Rocky Mountains. Photo of the Rocky Mountains. Observations: The large mountains have jagged tops. The chunks of rock vary in size. The rock appears to be light and dark gray. There is a forest at base of the mountains.Evidence Card C: Rock from the Rocky Mountains. Photo of a rose-colored rock with dark veins. Observations: The rock contains visible pink, dark gray, and light brown grains. The grains fit together. The grains have sharp edges. There are no bubbles or fossils in this sample.2Why can we eliminate the claim you selected?
Rocky Mountains and Great Plains rock came together to form one rock formation, but then something tore it apart. The first claim is true while the second claim needs to be eliminated
What are rocky mountains?It should be remembered that the Rocky Mountains and the Great Plains are two separate rock formations that did not form simultaneously. The older rock's minerals were not incorporated into the younger rock as a result.
After combining the rock from the Rocky Mountains and the Great Plains to form one formation, something tore it apart. As a result, the second claim must be rejected because it is false.
For more information on rocky mountains kindly visit to
https://brainly.com/question/13438263
#SPJ1
How do you solve wavelength and frequency problems?
λ = v/f. Wavelength, velocity, and frequency are all given in units of meters, seconds, and hertz (Hz).
Which two equations represent wave speed?Wavelength and frequency are related to wave speed via the wave speed equation (Speed = Wavelength x Frequency). This equation can be used to determine wave speed when the wavelength and frequency are known.
Which two frequency formulas are there?The frequency formula in terms of time is provided as follows: f = 1/T, where T is the duration of one cycle in seconds and f is the frequency in hertz. The formula for calculating frequency in terms of wavelength and wave speed is given as f = /, where is the wave speed and is the wavelength of the wave.
To know more about wavelength visit:-
https://brainly.com/question/12924624
#SPJ4
What is the approximate wavelength range of thermal radiation Mcq?
Thermal radiation has a wavelength range of 7700A to 4106A.A emission if electromagnetic waves by all stuff with a temperature greater that absolute zero is known as thermal radiation.
What roughly is the heat radiation wavelength range?Thermal electromagnetic radiation is radiation with wavelengths between 0.1 and 100 m that is emitted by all matter that is not at absolute zero.All of the infrared and visible spectrums, as well as some ultraviolet (UV), are included (IR).
What is the heat source's radiative energy's approximate wavelength?Thermal radiation, or radiation heat transfer, is defined as radiation having wavelengths between 0.1 and 100 m.The entire visible, infrared, and some ultraviolet spectrums are all included in thermal radiation.
To know more about thermal radiation visit:
https://brainly.com/question/24200572
#SPJ4
Coach Carver has created a new team game for his students to play. It involves sprinting, tagging, and throwing a ball. Each team consists of 30 to 40 students. Which place is the safest to play the game?
a. an outdoor basketball court
b. a gymnasium
c. an empty classroom
d. a football field
The safest plays to play sprinting, tagging, and throwing the ball is d) a football field
A football/soccer field is a rectangular field surrounded by lines called perimeters. The two long lines are the touch lines and the two short lines are the goal lines. It is divided in half by the midline connecting the midpoints of the two contact lines. The field is 100 yards long, with 10-yard end zones for each team. The field has stripes across the width of the field at 5-yard intervals. The soccer field is 160 feet wide. The games that can be played on the football field are sprinting, throwing the ball, tagging, etc.
Learn more about the football field in
https://brainly.com/question/17831728
#SPJ4
What is the line segment formula?
Formula of
Line segment
is AB =
[tex]\sqrt{(x_{2} -x_{1} )^{2} } +\sqrt{(y_{2} -y_{1} )^{2} }[/tex]
Line segment
is a part of line with definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as
Line segment
.
A ______________________ B
(x₁,y₁) (x₂,y₂)
This line segment can be represented as [tex]\frac{}{AB} /\frac{}{BA}[/tex]. In other word we can say line segment is
subset
of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by
ruler
. A bar (-) is always on top of its notation {[tex]\frac{}{AB}[/tex]}.
Learn more about
Line segment
visit:
brainly.com/question/30072605
#SPJ4
Formula of Line segment is AB = [tex]\sqrt{(x_{2}-x_{1})^{2} } +\sqrt{(y_{2}-y_{1})^{2} }[/tex]
Line segment
is a part of line with a definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as
Line segment
A ______________________ B
(x₁,y₁) (x₂,y₂)
This line segment can be represented as[tex]\overline{AB}/\overline{BA}[/tex] . In other word we can say line segment is subset of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by ruler A bar (-) is always on top of its notation {[tex]\overline{AB}/\overline{BA}[/tex]}.
To learn more about Line segment :
brainly.com/question/30072605
#SPJ4
What is the i in the Ohm's law?
Collaborative problem solving involves all of the following except a) a chorus where different individuals sing different notes of a song to create harmony. b) the jigsaw problem where different members of a group contribute to the solution Oc) a consensus-building task where different points of views must be considered d) negotiation tasks where the best possible solution depends upon consideration of different perspectives.
Yes, option a—a chorus where different people sing different notes of a song to generate harmony—is the right response.
The definition of the term "collaborate" according to Webster's Dictionary is "to work jointly or together, especially in an intellectual pursuit." Therefore, collaborative problem solving (CPS) is basically a cooperative effort to solve difficulties. There are four components to the Xandar task in the CPS task harmonization that PISA has made available. The components of the task require the respondent to work together to create a method for solving problems, put the method into practice, arrive at a solution, and assess the answer. For instance, if parents in a custody battle appear to back and forth on childcare arrangements, it may be a sign that one parent has concerns about
To learn more about harmony please click on below link
https://brainly.com/question/2694990
#SPJ4
What is a 3 wavelength lamp?
A 3 wavelength lamp is a type of light therapy device used to improve skin health and appearance.
What is wavelentgh?Wavelength is the distance between two successive peaks or troughs of a wave, such as light, sound, or other forms of energy. It is measured in meters or nanometers and is related to the frequency of the wave, as the frequency is inversely proportional to the wavelength. Wavelength can also be used to describe the physical size of an object, such as a particle or cell.
It emits both visible and invisible light in three different wavelengths, namely red, blue and near-infrared. The red wavelength helps to reduce inflammation and improve circulation, while the blue wavelength helps to kill acne-causing bacteria. The near-infrared wavelength helps to boost collagen and elastin production, which can help to improve skin texture and firmness. This type of light therapy is effective in treating a number of skin conditions and has been used in clinics and spas for many years.
know more about wavelentgh click-
https://brainly.com/question/10750459
#SPJ4
When you are playing pool and a moving ball hits a stationary ball and the moving ball stops what happens to the momentum of the moving ball?
When a moving pool ball hits a stationary ball, some kinetic energy from the moving pool ball is transferred to the stationary ball and it attains momentum.
Both in the case of elastic and inelastic collisions, momentum is preserved. That means the total momentum will always be the same.
Momentum (ρ) is defined as "mass in motion". There are two factors affecting the momentum. Mass(m) and velocity(v).
ρ = m×v
So for a stationary object momentum will be 0. When the moving ball hits the stationary ball, it starts moving, because it gets kinetic energy from the moving ball. The total momentum before and after the collision will always be equal.
mₐ₁× vₐ₁ = mₐ₂×vₐ₂ + m₂ v₂
mₐ₁× vₐ₁ is the momentum of ball A before the collision
mₐ₂×vₐ₂ is the momentum of ball A after collision
m₂ v₂ is the momentum of ball B after collision.
So the stationary ball begins to move after the collision due to increased kinetic energy and attains some momentum. The total momentum of the system remains the same.
For further information on momentum, please refer
https://brainly.com/question/17662202
#SPJ4
which wavelength of the band on the helium emission line spectrum has the most energy? which has the lowest?
The light emitted by hydrogen atoms appears red because the most intense line in its spectrum, at 656 nm, is in the red section of the visible spectrum.
The principal quantum number(n) for the Lyman series is 1. As a result, the Lyman series has the highest energy in the hydrogen spectrum. This is due to the fact that helium has more electrons than hydrogen. Helium has two, while hydrogen has only one. More spectral lines will be noticed as more electrons are stimulated. Helium therefore has more spectral lines than hydrogen. Gamma rays are the most energetic, have the shortest wavelengths, and have the highest frequencies.
Learn more about spectrum here-
https://brainly.com/question/12157930
#SPJ4
a 3 * 10 to the power -3 kg copper penny drops a distance of 50 m to the ground. if 65 percent of the initial potentia energy goes into increasing the internal energy of the penny, determine the megnitude of that increase.
can some genius explain this to me please?
Explanation:
The magnitude of the increase is 0.9555J
Explanation
Potential Energy (PE) = mgh mass(m) = 3 * 10 ^ - 3 * kg
, acceleration due to gravity (g) = 9.8m / (s ^ 2) distance(h) = 50m PE = 3 * 10 ^ - 3 * 9.8 * 50 = 1.47J Increase in internal energy = 65% of 1.47J = 0.65 × 1.47J
= 0.9555J
What type of metamorphosis do hive beetles undergo?a. completeb. incompletec. mesocomplete
Insects can change gradually through progressive metamorphosis or completely through total metamorphosis.
Some insects, including beetles, ants, bees, wasps, butterflies, moths, and bees, develop through a special life cycle known as full metamorphosis. Egg, larva, pupa, and adult are the four separate phases of complete metamorphosis. One type of insect that undergoes complete metamorphosis is the beetle, which includes ladybugs. Butterflies and flies are two examples of common and recognised insects that undergo complete metamorphosis. Beetles, bees, wasps, ants, and fleas are among other insects that undergo complete metamorphosis. Termites, praying mantises, and cockroaches all go through partial metamorphosis. Ants, fleas, and wasps all go through a full metamorphosis. Complete metamorphosis is finally distinguished from other types of growth by the several stages that are produced with each
To learn more about metamorphosis please click on below link
https://brainly.com/question/14372631
#SPJ4
How long will it take for a 40.0 gram sample of I 131 half-life 8.040 days to decay to 1 100 its original mass?
It will decompose to 1/100 of its initial mass in 53.4 days.
How long before half of a sample of 131i decays?A radioisotope with an 8-day half-life is iodine-131. By emitting beta particles, it decomposes into xenon-131. Any sample of iodine-131 will have lost half of its atoms after eight days, leaving the sample with a composition of 50% iodine-131 and 50% xenon-131.
How is decay rate determined?The deterioration rate is expressed as a percentage. The decimal equivalent can be obtained by simply reducing the percentage and multiplying it by 100. Therefore, it is possible to determine the decay factor b = 1-r. For instance, the exponential function's decay rate is 25% if the rate of decay is 0.25 and b = 1- 0.25 = 0.75 for the decay factor.
To know more about half-life visit:-
https://brainly.com/question/24710827
#SPJ4
a man seeking to set a world record wants to tow a 118,000-kg airplane along a runway by pulling horizontally on a cable attached to the airplane. the mass of the man is 93 kg, and the coefficient of static friction between his shoes and the runway is 0.79. what is the greatest acceleration the man can give the airplane? assume that the airplane is on wheels that turn without any frictional resistance.
The greatest acceleration the man can give the airplane is 6.102*10^-3 m/s^2
What is a frictional force ?
The force produced when two surfaces slide past one another and make contact is known as frictional force. The surface texture of these forces and the amount of force pressing them together have the biggest impact.
Mass of the person
m1 = 93kg
Mass of the air plane
m2 = 118000 kg
Coefficient of static friction between the shoes of the person and floor
μs=0.79
Acceleration due to gravity
g=9.8m/s^2
The maximum force the person can apply on the floor is equal to his weight
F = w = m1∗g
= 93∗9.8=911.4 N
The maximum frictional force he can get from the floor is the product of coefficient of static friction and normal reaction
Ff = μs∗N
= μs∗W
= 0.79 ∗ 911.4 = 720 N
Let's assume that the individual is able to use or apply the entire frictional force in pushing the airplane.
Following that, the relationship can be used to determine the acceleration an air plane created.
Ff = m2 * a
a = Ff/m2
= 720/118000
= 6.102*10^-3 m/s^2
To learn more about force use link below:
https://brainly.com/question/12785175
#SPJ4
A ball of mass M is on a horizontal surface with negligible friction. One end of a string is attached to the ball so that it is spun in a horizontal circle of radius R at a tangential speed vo, as shown in Figure 1. A free-body diagram for the ball at an instant in time is shown in Figure 2. The magnitude of the tension force is also indicated in Figure 2. Which of the following equations represents the centripetal acceleration of the ball if its tangential speed is increased to 2vo ?
The centripetal acceleration of the ball if its tangential speed is increased to 2 v₀ is (4 M v₀²)/R.
The centripetal force equation that we are aware of is
F = (m* v²)/r ----(1)
where,
m is the of the ball
v is the velocity
r is the radius
We are aware that F = m* a ----(2)
Equating (1) and (2), we have,
m* a = (m* v²)/r
a = v²/r -----(3)
where, a is centripetal acceleration
In this problem, it is said that, the tangential speed is increased to 2 v₀, then the centripetal acceleration
So, v = 2 v₀, r = R
Substituting the values in (3), we have,
ac = (2 v₀)²/R = 4 v₀²/R
Thus, the required centripetal acceleration is 4 v₀²/R.
The question is incomplete. The complete question has the missing figures that are attached in the attachment below.
To know more about centripetal acceleration:
https://brainly.com/question/20113093
#SPJ4
in the double-slit experiment with electrons, suppose that the observer uses a detector to determine through which slit the electron actually passes. does this affect the outcome of the experiment, and why or why not?
No matter the detector, the pattern on the screen is still non-interference.
In the double-slit experiment, how does the detector operate?In the double-double slit experiment, photons are momentum entangled and can share information about each other's which-slit paths if one of them is found near any double slit. If a single slit of a double-slit is blocked, it is possible to determine the which-slit path from the simultaneous photon detection.
What impact does observation have on the double-slit test?In quantum physics, the double-slit experiment serves as a prominent illustration of the observer effect. The measured outcomes of this experiment can alter if quantum phenomena are observed, according to physicists.
To know more about double-slit experiment visit:-
https://brainly.com/question/28108126
#SPJ4
Classify the measurements as having English units or metric units. English units Metric units Answer Bank 2.50 lb 2. 20 kg 335 ml. 33.21 oz 12.2 26.9 mm Now, classify the units of the measurements as units of length, mass or volume.
A decimal system of measurement, the metric system was developed in France in 1799 and has since been widely used around the world.
The metric system serves as the foundation for the International System of Units, the universally accepted system of measurement. Although the United States legal framework was modified in 1866 to permit the use of the metric system, the country has not yet adopted it as its "official" system of measuring. Body-based measuring was the foundation on which the United States English System of measurement was built. Traditionally, the foot, the inch, and the pound have served as the foundational units of measurement in the English system. Metric prefixes like kilo, Millis, and centi are used to denote multiples of a base unit, such as the meter or the gram. When it comes to measuring length, the English system has a bad reputation.
The complete answer is attached as an image.
Want to know more about units visit the link which is given below;
https://brainly.com/question/10433377
#SPJ4
the plate area of a parallel-plate capacitor of capacitance c is doubled and the distance between the plates is halved, so that the volume of the dielectric remains the same. the new capacitance of the capacitor is
The new capacitance of the capacitor is Cf = 4Ci is the correct answer.
What is capacitance?Capacitance is an electrical property of a material or system that is related to the amount of charge it can store in an electric field. It is measured in Farads (F), which is the ratio of the electric charge stored on a capacitor to the applied voltage. In other words, it is an expression of the ability of an electrical system or component to store energy in the form of an electric field. It is an important factor in the design of electrical systems, and can be used to control the flow of electric current in circuits. It is also used to measure the amount of voltage that a capacitor can sustain before its capacitance decreases.
Using the Capacitance theorem
Given:
Capacitance of Parallel Plate Capacitor = C
Area = 2A
Distance = 1/2d
Volume of the dielectric remains the same.
New Capacitance =?
1. Initial Capacitance can be written as:
Ci = A ∈0 / d
2. After putting the desired values of area and distance.
Cf = 2A ∈0 / (d/2)
Cf = 4A ∈0 / d
Cf = 4Ci
To learn more about Capacitance:
https://brainly.com/question/49621
#SPJ4
the equivalent capacitance is a. 9 μf b. 6 μf c. 3 μf d. 2 μf e. 1 μf
The equivalent capacitance is 21 μF.
In electrical engineering, equivalent capacitance often abbreviated as C eq—is a measurement of the total combined electric charge held in two or more capacitors connected in series or parallel. A capacitor is an electrical device that stores electrical energy into the electric field. Typically, a capacitor has two electrical leads that are separated by a dielectric or other insulating substance.
We are given that,
capacitance =c₁ =9 μF
capacitance = c₂ =6 μF
capacitance = c₃ = 3 μF
capacitance = c₄ =2 μF
capacitance = c₅ = 1 μF
Thus If the capacitor is connected in parallel the equivalent capacitance, cₐ can be calculated by the equation,
cₐ= c₁+c₂+c₃+c₄+c₅
cₐ = 9 +6 +3 +2+1 μF
cₐ = 21 μF
Therefore , The equivalent capacitance would be 21 μF.
To know more about equivalent capacitance
https://brainly.com/question/27988457
#SPJ4
A 2 kg stone moves with a speed of 1 m/s. A second 2 kg stone is moving twice as fast. Compare their kinetic energies.
The second 2 kg stone has four times the kinetic energy of the first 2 kg stone.
The kinetic energy of an object is equal to (1/2) * m * v^2, where m is the mass of the object and v is the velocity of the object.
For the first 2 kg stone, the kinetic energy is
(1/2) * 2 kg * 1 m/s^2 = 1 kg m^2/s^2.
For the second 2 kg stone, the velocity is twice as fast, so the kinetic energy is
(1/2) * 2 kg * (2 m/s)^2 = 8 kg m^2/s^2.
The second 2 kg stone has 8 kg m^2/s^2 of kinetic energy, which is four times the kinetic energy of the first 2 kg stone, which has 1 kg m^2/s^2 of kinetic energy.
Learn more about Kinetic Energy here:
https://brainly.com/question/20658056
#SPJ4
What are the 10 common genetic disorders?
The 10 most prevalent genetic disorders include albinism, Angelman syndrome, Ankylosing spondylitis, Apert syndrome, Charcot-Marie-Tooth disease, Congenital adrenal hyperplasia, Cystic fibrosis, and Down syndrome.
What genetic ailment is the most prevalent?The most prevalent, deadly hereditary disease in the US is cystic fibrosis (CF). The condition affects about 30,000 persons in the US.
What exactly do you mean by genetics?How traits and genes are passed down from one generation to the next is the main topic of genetics research. Our DNA contains information that affects our personalities, looks, and even health! Everything starts with genetics. One child has blonde hair like their mother, and their sibling has brown hair like their father; this is due to genetics.
To know more about genetic disorders visit:-
https://brainly.com/question/17404085
#SPJ4
Where should you place the weight in the boat?
Making ensuring the weight is positioned above the boat's center of mass is important while loading them onto the boat.
The center of mass is a location within or outside of someone where we believe the entirety of the body's mass to be concentrated. We are aware that a boat will suffer an upward force equivalent to the mass of the fluid it is dislodging while it is hovering over it.
The likelihood of the boat being unbalanced is significantly decreased when the passengers or weight are positioned close to the center of mass of the boat.
To know more about center of mass, visit,
brainly.com/question/28865238
#SPJ4
Which force is greater static or sliding friction?
Sliding friction is significantly less than static friction for a pair of specified surfaces. because moving an object in motion is simpler than moving an object at rest.
Why do sliding and static friction differ?Contact points are not given enough time to fully interlock while sliding. thus, less friction. But because the surfaces interlock so effectively while the object at rest, friction increases. The difference between static and sliding friction is thus explained.
Why is static friction at its highest?Friction force has an identical amplitude in the reverse direction to any little force applied to an object. The greatest static friction force on an item is s times the usual force.
To know more about Sliding friction visit :
https://brainly.com/question/17140804
#SPJ4
A ball of putty is dropped from a height of 2 m onto a hard floor, where it sticks. Think what object or objects need to be included within the system if the system is to be isolated during this process? and check the object that no apply.
The floor and the ball must both be included for the released ball to be in an isolated system.
What does the conservation of linear momentum entail?
According to the conservation of linear momentum concept, a system's overall momentum is conserved in an isolated setting.
A system that is isolated is one that is unaffected by outside forces.
The items required to be included for the released ball to be in an isolated system are the floor and the ball.
To learn more about isolated system. please click on below link
https://brainly.com/question/30079145
#SPJ4
How do you solve a system of equations in Mathematica?
We first perform an algebraic solution to the equation before using N to obtain a numerical solution. Alternately, we might use NSolve to begin by numerically solving the equation.
What method of equation solving is the simplest?Systems of equations can be solved using one of three techniques: graphing, substitution, or elimination. To answer a problem by graphing, just plot the given equations on a graph and identify the point(s) where they all intersect.
System of differential equations can Wolfram solve?The differential equation solving functions of the Wolfram Language can be used to solve a wide variety of differential equation classes, automatically choosing the best techniques without user preprocessing.
To know more about Systems of equations visit:-
https://brainly.com/question/21620502
#SPJ4