9. Ms. Green writes a function e(h) that can be used to predict the number of eggs that will be laid daily
by 1,000 chickens when exposed to h hours of light per day.
What is the domain of e(h)?
A. the integers from 0 to 24
B. the integers from 0 to 1,000
C. the real numbers from 0 to 24
D. the real numbers from 0 to 1,000

However, it does not appear to be a familiar series, and finding an exact sum may be difficult or impossible.

To determine the convergence of the series, we can use the limit comparison test.

Let's compare the given series with the series 1/n^2, since both of them have positive terms.

lim n→∞ ln[(n^2+8)/(3n^2+1)] / (1/n^2)

= lim n→∞ [ln(n^2+8) - ln(3n^2+1)] / (1/n^2)

= lim n→∞ [(2n/(n^2+8)) - (6n/(3n^2+1))] * n^2

= lim n→∞ [2/(1+(8/n^2)) - 6/(3+(1/n^2))]

The limit of this expression can be evaluated by dividing the numerator and denominator by n^2, which gives:

lim n→∞ [2/(1+(8/n^2)) - 6/(3+(1/n^2))]

= lim n→∞ [2/(n^2/n^2+(8/n^2)) - 6/(n^2/n^2+(3/n^2))]

= lim n→∞ [2/(1+(8/n^2)) - 6/(1+(3/n^2))] * (1/n^2)

Now we can see that the limit is of the form (finite number) * (1/n^2), which goes to zero as n approaches infinity. Therefore, by the limit comparison test, since the series 1/n^2 is convergent (p-series with p=2), the given series is also convergent.

Since the series is convergent, we can find its sum using any appropriate method. However, it does not appear to be a familiar series, and finding an exact sum may be difficult or impossible.

To learn more about convergence visit:

https://brainly.com/question/29258536

#SPJ11

A dependent variable is also known as a(n) c. response variable.

In experimental or research studies, the dependent variable is the variable being measured or observed by the researcher. It is called a dependent variable because it is believed to depend on or be influenced by the independent variable, which is the variable that is manipulated or controlled by the researcher.

For example, if a researcher wants to study the effect of a new drug on blood pressure, the dependent variable would be the blood pressure readings of the study participants, while the independent variable would be the administration of the new drug.

Understanding the concept of dependent variables is crucial in designing and conducting valid research studies. Researchers must carefully identify and define their dependent variables to ensure that they are measuring what they intend to measure and that their findings are accurate and reliable.

Additionally, understanding dependent variables can help researchers interpret and draw meaningful conclusions from their data.

To learn more about “variables” refer to the https://brainly.com/question/28248724

#SPJ11

The statement is only partially true: the length of a confidence interval increases with a higher confidence level but decreases with a larger sample size.

The statement is partially true. Assuming that all else remains constant, the length of a confidence interval for a population mean does increase when the confidence level increases. However, when the sample size increases, the length of the confidence interval actually decreases. Here's a step-by-step explanation:

1. Confidence level: As the confidence level increases, the area under the curve that we want to capture also increases. This means we require a wider interval to capture the larger area, so the length of the confidence interval increases.

2. Sample size: As the sample size (n) increases, the standard error of the sample mean (SE) decreases, since SE = σ/√n (where σ is the population standard deviation). A smaller standard error results in a narrower confidence interval, so the length of the confidence interval decreases.

In summary, the statement is only partially true: the length of a confidence interval increases with a higher confidence level but decreases with a larger sample size.

to learn more about  confidence interval click here:

https://brainly.com/question/14366786

#SPJ11

The calculated total weight of the fruit is 50 2/5 pounds

From the question, we have the following parameters that can be used in our computation:

This means that

Banana = 6 * Apple

So, we have

Banana = 6 * 7 2/10 pounds.

Evaluate the products

Banana = 43 2/10 pounds.

So, the total weight is

total weight = apple + banana

This gives

total weight = 7 2/10 + 43 2/10

Evaluate the sum

total weight = 50 4/10

Simplify

total weight = 50 2/5

Hence, the total weight is 50 2/5 pounds

Read more about fraction at

https://brainly.com/question/17220365

#SPJ1

The series∑[n=1 to [infinity]] ln(n/(n+3)) converges with a convergent value of 1/2.

To determine whether the given series converges, we can use the comparison test. The series is:
∑[n=1 to infinity] ln(n/(n+3))
Step 1: Find a comparable series
We can compare it to the series ∑[n=1 to infinity] (1/n - 1/(n+3)) since the logarithm function is monotonic.
Step 2: Perform the comparison test
Since ln(n/(n+3)) is between 1/n and 1/(n+3), the series becomes:
∑[n=1 to infinity] (1/n - 1/(n+3))
Step 3: Check for telescoping series
This is a telescoping series, which means that some terms will cancel out others.
The partial sum is:
(1 - 1/4) + (1/2 - 1/5) + (1/3 - 1/6) + ...
The terms cancel out like this:
[1 - (1/2 + 1/4)] + [(1/2 - 1/4) - (1/4 + 1/5)] + ...
So the series converges and has the value:
Value if convergent = 1 - 1/2 = 1/2

Your answer: Converges (y), Value if convergent: 1/2

To learn more about the series, refer:-

https://brainly.com/question/15415793

#SPJ11

The series∑[n=1 to [infinity]] ln(n/(n+3)) converges with a convergent value of 1/2.

To determine whether the given series converges, we can use the comparison test. The series is:
∑[n=1 to infinity] ln(n/(n+3))
Step 1: Find a comparable series
We can compare it to the series ∑[n=1 to infinity] (1/n - 1/(n+3)) since the logarithm function is monotonic.
Step 2: Perform the comparison test
Since ln(n/(n+3)) is between 1/n and 1/(n+3), the series becomes:
∑[n=1 to infinity] (1/n - 1/(n+3))
Step 3: Check for telescoping series
This is a telescoping series, which means that some terms will cancel out others.
The partial sum is:
(1 - 1/4) + (1/2 - 1/5) + (1/3 - 1/6) + ...
The terms cancel out like this:
[1 - (1/2 + 1/4)] + [(1/2 - 1/4) - (1/4 + 1/5)] + ...
So the series converges and has the value:
Value if convergent = 1 - 1/2 = 1/2

Your answer: Converges (y), Value if convergent: 1/2

To learn more about the series, refer:-

https://brainly.com/question/15415793

#SPJ11

For the linear transformation T that rotates points about some line through the origin, an eigenvalue of A is 1. The eigenspace associated with this eigenvalue is the subspace of all vectors parallel to the axis of rotation.

Since T is a rotation about some line through the origin, it has an axis of rotation, which is the line through the origin that remains fixed by the transformation.

Any vector on this line will be an eigenvector of the transformation with eigenvalue 1, since it remains fixed under the transformation.

Therefore, an eigenvalue of A is 1. The eigenspace corresponding to this eigenvalue is the subspace spanned by the axis of rotation.

To know more about eigenvalue:

https://brainly.com/question/29749542

#SPJ4

The probability of x ≤ 3 successes in 9 independent trials with probability of success 0.4 is approximately 0.57744.

To compute the probability of x successes in n independent trials of a binomial probability experiment, we use the binomial probability formula:

[tex]P(x) = (nC_{X} * p^x * q^(n-x))[/tex]

where n is the number of trials, p is the probability of success on a single trial, q is the probability of failure on a single trial (q = 1-p), and [tex]nC_{x}[/tex] is the number of combinations of n things taken x at a time.

In this case, n = 9, p = 0.4, q = 0.6, and we want to find the probability of x ≤ 3 successes. We can compute this by summing the probabilities of each of the possible outcomes:

P(x ≤ 3) = P(x=0) + P(x=1) + P(x=2) + P(x=3)

Using the binomial probability formula, we get:

[tex]P(x=0) = (9C_{0}) * 0.4^0 * 0.6^9 = 0.01024[/tex]

[tex]P(x=1) = (9C_{1}) * 0.4^1 * 0.6^8 = 0.07680[/tex]

[tex]P(x=2) = (9C_{2}) * 0.4^2 * 0.6^7 = 0.20212[/tex]

[tex]P(x=3) = (9C_{3}) * 0.4^3 * 0.6^6 = 0.28868[/tex]

Therefore,

P(x ≤ 3) = 0.01024 + 0.07680 + 0.20212 + 0.28868 = 0.57744

So the probability of x ≤ 3 successes in 9 independent trials with probability of success 0.4 is approximately 0.57744.

To know more about probability refer here:

https://brainly.com/question/31722868

#SPJ11

The derivative of f(x)=4/3x⁵/4 at the point x=4 is 5.06.

This is found by using the power rule, which states that the derivative of xⁿ is n*xⁿ⁻¹. In this case, we have n=5/4, so the derivative is (5/4)*(4/3)*4¹/⁴ = 5.06.

The power rule is a common method for finding derivatives of functions with powers. It states that if f(x) = xⁿ, then f'(x) = nxⁿ⁻¹. Using this rule, we can find the derivative of f(x)=4/3x⁵/4 by first multiplying the constant 4/3 by the power of x, which gives 4/3 * (5/4)x⁽⁵/⁴⁻¹⁾. Simplifying this expression gives us the derivative f'(x) = (5/3)x¹/⁴.

To find the value of the derivative at x=4, we simply plug in x=4 to get f'(4) = (5/3)4¹/⁴ = 5.06 (rounded to two decimal places). This tells us the rate of change of the function at the specific point x=4.

To know more about derivative click on below link:

https://brainly.com/question/25324584#

#SPJ11

The bias of mu1 is 0, the variance of mu1 is 1/2, and the mean squared error of mu1 is 1/2.

To find the bias, variance, and mean squared error of mu1:

We can use the following formulas:
Bias = E[mu1] - mu
Variance = Var[mu1]
MSE = E[(mu1 - mu)^2]
First, let's find E[mu1]:
E[mu1] = E[(x1 + x2)/2]
Since x1 and x2 are independent, their expected values are equal to mu:
E[x1] = E[x2] = mu
Therefore, E[mu1] = E[(x1 + x2)/2] = (E[x1] + E[x2])/2 = mu.
Next, let's find Var[mu1]:
Var[mu1] = Var[(x1 + x2)/2]
Since x1 and x2 are independent, their variances are both equal to (sigma)^2 = 1:
Var[x1] = Var[x2] = (sigma)^2 = 1
Therefore, Var[mu1] = Var[(x1 + x2)/2] = (1/4)*Var[x1] + (1/4)*Var[x2] = 1/2.
Finally, let's find MSE:
MSE = E[(mu1 - mu)^2]
= E[(x1 + x2)/2 - mu)^2]
= E[((x1 - mu) + (x2 - mu))/2]^2
= E[(x1 - mu)^2 + 2(x1 - mu)(x2 - mu) + (x2 - mu)^2]/4
= (E[(x1 - mu)^2] + E[(x2 - mu)^2] + 2E[(x1 - mu)(x2 - mu)])/4
= (Var[x1] + Var[x2] + 2Cov[x1,x2])/4
Since x1 and x2 are independent, their covariance is 0:
Cov[x1,x2] = E[(x1 - mu)(x2 - mu)]

= E[x1x2 - mu(x1 + x2) + mu^2]

= E[x1]E[x2] - mu(E[x1] + E[x2]) + mu^2
= mu^2 - mu^2 - mu^2 + mu^2 = 0
Therefore, MSE = (Var[x1] + Var[x2])/4 = 1/2.
In summary, the bias of mu1 is 0, the variance of mu1 is 1/2, and the mean squared error of mu1 is 1/2.

To know more about Bias,Variance and Mean squared error:

https://brainly.com/question/31489653

#SPJ11

Answer:

Step-by-step explanation:

The point (6, 1) is not a solution to the system.

(6, 1) lays on the dotted line.

The probability of drawing a yellow marble, holding on to it, and then drawing a red marble is approximately 0.1667 or 16.67%.

To find the probability of drawing a yellow marble, holding on to it, and then drawing a red marble, we need to calculate the probability of each event occurring and then multiply the probabilities together, since the events are dependent.

First, let's find the probability of drawing a yellow marble. There are 5 + 1 + 8 + 2 = 16 marbles in total, and 8 of them are yellow. Therefore, the probability of drawing a yellow marble is:

P(Yellow) = 8/16 = 1/2

Next, we need to find the probability of drawing a red marble after drawing a yellow marble and holding on to it. After drawing a yellow marble, there are 15 marbles left in the bag, and 5 of them are red. Therefore, the probability of drawing a red marble after drawing a yellow marble and holding on to it is:

P(Red|Yellow) = 5/15 = 1/3

Finally, we can find the probability of both events occurring by multiplying the probabilities together:

P(Yellow and Red) = P(Yellow) x P(Red|Yellow)

P(Yellow and Red) = (1/2) x (1/3) = 1/6

Therefore, the probability of drawing a yellow marble, holding on to it, and then drawing a red marble is 1/6, or approximately 0.167.

Learn more about probability  from

https://brainly.com/question/24756209

#SPJ1

Answer:

x=8inches²/6+x

Step-by-step explanation:

Area Photo: 1/2 area entire ad

Area photo: 4inch*2inch= 8inch²

Area entire ad=8inch²*2=16inch²

as you can see in the photo, we can use the data to our advantage.

The area left that's not the photo is (4*x) +(x*x)+(2*x).

so that leaves us with the equation 8inch²=4x+2x+x²

8inch²=6x+x²

x(6+x)=8inch²

x=(8inch²)/(6+x)

we have shown that n is divisible by d, which means that d | n.

What is Derivation ?

Derivation is a mathematical technique used to find the rate at which a function changes. In other words, it is a method for calculating the instantaneous rate of change of a function at a particular point. Derivation is an important tool in calculus, and it has a wide range of applications in fields such as physics, engineering, and economics.

We are given that dc | nc, which means that there exists an integer k such that nc = k(dc).

We need to show that d | n, which means that there exists an integer m such that n = md.

We can start by dividing both sides of the given equation nc = k(dc) by c:

n = k(d)

Since d and k are integers, their product k(d) is also an integer, which means that n is an integer.

Therefore, we have shown that n is divisible by d, which means that d | n.

To learn more about Derivation from given link.

https://brainly.com/question/31184140

#SPJ1

a) Maclaurin series for f(x) = arctan(x) is f(x) = x - x^3/3 + x^5/5 - x^7/7 + ...

b) Radius of convergence of the series is R = 1

The Maclaurin series for the arctan function can be obtained by repeatedly differentiating the function and evaluating the derivatives at x=0, then using the formula for the Maclaurin series

f(x) = f(0) + f'(0)x + f''(0)x^2/2! + f'''(0)x^3/3! + ...

In this case, we have

f(x) = arctan(x)

f(0) = arctan(0) = 0

f'(x) = 1/(1+x^2)

f'(0) = 1

f''(x) = -2x/(1+x^2)^2

f''(0) = 0

f'''(x) = 2(3x^2-1)/(1+x^2)^3

f'''(0) = -2/1^3 = -2

Substituting these values into the formula, we obtain

f(x) = 0 + 1x + 0x^2/2! - 2 × x^3/3! + ...

Simplifying, we get

f(x) = x - x^3/3 + x^5/5 - x^7/7 + ...

This is the Maclaurin series for the arctan function.

The radius of convergence of this series can be found using the ratio test

lim |a_{n+1}/a_n| = lim |(-1)^n+1 × x^(2n+1)/(2n+1)| = |x|

Thus, the series converges for |x| < 1, and diverges for |x| > 1. Therefore, the radius of convergence is R=1.

Learn more about Maclaurin series here

brainly.com/question/31383907

#SPJ4

The partial fraction decomposition for this integrand will have the form:
x2 − 2x − 1 = A/(x-1) + B/(x-1)

Once we find A and B, we can substitute them back into the original equation and integrate each term separately. This will allow us to evaluate the integral of x2 − 2x − 1 using the partial fraction decomposition.

To perform a partial fraction decomposition on the integrand x2 − 2x − 1, we first need to factor the denominator into linear factors. The quadratic x2 − 2x − 1 can be factored as (x-1)(x-1), which means we have a repeated linear factor of (x-1).

To decompose this, we need to write it in the form of a fraction with a numerator and denominator. The numerator will have a constant term for each repeated linear factor, and the denominator will be the product of each linear factor.

Know more about partial fraction decomposition. here:

https://brainly.com/question/30894807

#SPJ11

The correct answer to convert 20 inches to feet using dimensional analysis is B. Divide 20 inches by 1ft/12 in.

To convert 20 inches to feet using dimensional analysis, we need to set up a conversion factor that relates inches to feet. We know that there are 12 inches in one foot, so we can write the conversion factor as 1 ft / 12 in. We want to cancel out the units of inches, so we can write 20 inches as 20 in / 1. Then, we can multiply 20 in / 1 by our conversion factor, making sure that the units cancel out appropriately:

20 in / 1 × 1 ft / 12 in = 20/12 ft

Simplifying, we get:

20 in / 1 × 1 ft / 12 in = 1.67 ft

Therefore, 20 inches is equal to 1.67 feet when using dimensional analysis and dividing by the conversion factor of 1ft/12in.

To learn more about dimensional analysis here:

brainly.com/question/1769579#

#SPJ11

The derivative of the cross product u(t) × v(t) with respect to t is given by:

d/dt [u(t) × v(t)] = [d/dt u(t)] × v(t) + u(t) × [d/dt v(t)]

Using the given functions, we have:

d/dt [u(t) × v(t)] = [leftangle0.gif 8cos(8t), 8sin(8t), 1 rightangle0.gif] × [t, cos(8t), sin(8t)] + [sin(8t), cos(8t), t] × [leftangle0.gif -8sin(8t), 8cos(8t), 0 rightangle0.gif]

Simplifying this expression, we get:

d/dt [u(t) × v(t)] = [8t, -8sin^2(8t), 8cos^2(8t)] + [8sin(8t), 8cos^2(8t), -8sin^2(8t)]

Therefore, the derivative of the cross product is:

d/dt [u(t) × v(t)] = [8t + 8sin(8t), 8cos^2(8t) - 8sin^2(8t), 8cos^2(8t) - 8sin^2(8t)]

To learn more about cross product, here

https://brainly.com/question/29164170

#SPJ4

The data described is a combination of both nominal and ordinal data. In the first round of the spelling bee is nominal data, and in the last round of the spelling bee is ordinal data.

The first round of the spelling bee is nominal data as it is a categorical variable that describes the order in which the participants ranked in that round. The first round did not have a specific rank or order, it was simply a categorical grouping. However, the last round of the spelling bee is an example of ordinal data as it is based on a specific order or rank. The participant came in first place in the last round, which is an example of ordinal data.

Ordinal data is a type of data that represents a specific order or ranking, while nominal data represents a categorical grouping. In the context of the spelling bee, the first round is an example of nominal data because it is simply a grouping of participants who performed in a certain way. In contrast, the last round of the spelling bee is an example of ordinal data because it involves a specific ranking or order that the participants achieved.

As it involves both categorical groupings and specific rankings. Understanding the difference between nominal and ordinal data is important when analyzing and interpreting data, as it can affect the statistical methods and techniques used to analyze the data.

know more about nominal here:

https://brainly.com/question/30401732

#SPJ11

The total area under a density curve is always equal to 1.

So, the correct answer is (c) 1.

The area under the curve represents the probability of all possible outcomes, and the total probability is always 1.

A density curve is a graphical representation of a numerical distribution where the outcomes are continuous. In other words, a density curve is the graph of a continuous distribution. This means that density curves can represent measurements such as time and weight (which are continuous), and NOT situations such as rolling a die (which would be discrete).

Density curves lie above or on a horizontal line, as displayed in the bell shaped "normal distribution" (one of the most common density curves).

Hence the answer is 1

To know more about Density curve:

https://brainly.com/question/31364473

#SPJ11

X and Y are not independent

In order to answer this question, we need to refer back to Exercise 5.1.1, which defines the joint distribution of two random variables X and Y as:

P(X = 1, Y = 1) = 0.1
P(X = 1, Y = 2) = 0.2
P(X = 1.5, Y = 1) = 0.3
P(X = 1.5, Y = 2) = 0.4

a. To determine the conditional probability distribution of Y given that X = 1.5, we need to use the formula:

P(Y = y | X = 1.5) = P(X = 1.5, Y = y) / P(X = 1.5)

Using the joint distribution from Exercise 5.1.1, we can calculate the probabilities as follows:

P(Y = 1 | X = 1.5) = 0.3 / (0.3 + 0.4) = 0.4286
P(Y = 2 | X = 1.5) = 0.4 / (0.3 + 0.4) = 0.5714

Therefore, the conditional probability distribution of Y given that X = 1.5 is:

P(Y = 1 | X = 1.5) = 0.4286
P(Y = 2 | X = 1.5) = 0.5714

b. To determine the conditional probability distribution of X given that Y = 2, we use the same formula as above:

P(X = x | Y = 2) = P(X = x, Y = 2) / P(Y = 2)

Using the joint distribution from Exercise 5.1.1, we can calculate the probabilities as follows:

P(X = 1 | Y = 2) = 0.2 / (0.2 + 0.4) = 0.3333
P(X = 1.5 | Y = 2) = 0.4 / (0.2 + 0.4) = 0.6667

Therefore, the conditional probability distribution of X given that Y = 2 is:

P(X = 1 | Y = 2) = 0.3333
P(X = 1.5 | Y = 2) = 0.6667

c. To calculate E(Y | X = 1.5), we use the formula:

E(Y | X = 1.5) = ∑ y * P(Y = y | X = 1.5)

Using the conditional probability distribution of Y given that X = 1.5 from part a, we can calculate the expected value as follows:

E(Y | X = 1.5) = 1 * 0.4286 + 2 * 0.5714 = 1.714

Therefore, E(Y | X = 1.5) = 1.714.

d. To determine whether X and Y are independent, we need to check whether the joint distribution factors into the product of the marginal distributions:

P(X = x, Y = y) = P(X = x) * P(Y = y)

Using the joint distribution from Exercise 5.1.1, we can see that this condition does not hold, since for example:

P(X = 1.5, Y = 1) = 0.3
P(X = 1.5) * P(Y = 1) = 0.5 * 0.4 = 0.2

Therefore, X and Y are not independent.

To know more about conditional probability refer here:

https://brainly.com/question/30144287

#SPJ11

The correct answer is 9.

To find the limit of lim x→0 sin(8x) tan(9x), we can use the fact that sin(8x)/x → 8 as x → 0 and tan(9x)/x → 9 as x → 0. Therefore, the limit becomes:

lim x→0 sin(8x) tan(9x) = lim x→0 (8x/8) (9x/tan(9x))
= 72 lim x→0 (sin(8x)/(8x)) (x/tan(9x))

Using L'Hospital's rule on the first factor, we get:
lim x→0 sin(8x)/(8x) = lim x→0 (cos(8x))/8 = 1/8

Using L'Hospital's rule again on the second factor, we get:
lim x→0 x/tan(9x) = lim x→0 (1/cos^2(9x)) = 1

Therefore, the overall limit is:
lim x→0 sin(8x) tan(9x) = 72 (1/8) (1) = 9

So, the correct answer is 9.

For more such questions on  L'Hospital's rule, visit:

brainly.com/question/2292194

#SPJ11

The optimal order of multiplication depends on the sizes of the matrices and can be determined using dynamic programming algorithms such as the matrix chain multiplication algorithm. But for small matrices like the ones given in this question, the binary tree approach is simple and effective.

To find the optimal operations for multiplying matrices in series, we need to consider the order of multiplication. This can be done using the associative property of matrix multiplication.

Let's say we have matrices A, B, C, D, and E, and we want to find the product A×B×C×D×E. There are different ways to multiply these matrices, but some may be more efficient than others.

One approach is to use a binary tree to represent the order of multiplication. We start by pairing up adjacent matrices and multiplying them, then pairing up the results until we get the final product.

For example, we can start with:

(A×B) × (C×D×E)

Then we can further split the second half into:

(A×B) × ((C×D)×E)

And finally:

((A×B)×(C×D))×E

This gives us a total of 3 matrix multiplications, which is the minimum number required to compute the product. Any other order of multiplication would require more operations.

In general, the optimal order of multiplication depends on the sizes of the matrices and can be determined using dynamic programming algorithms such as the matrix chain multiplication algorithm. But for small matrices like the ones given in this question, the binary tree approach is simple and effective.

To learn more about optimal order here:

brainly.com/question/29734387#

#SPJ11

C-Child ticket

4C-Adult tickets

6.10C+9.90(4C)=1188.20

6.10C+39.60C=1188.20

45.70C=1188.20

Divide both sides by 45.70 to get C.

C=26

This means 26 child tickets were sold that day.

Let's check our answer:

26×6.10=158.60

26×4=104 (Adult tickets)

104×9.90=1029.60

158.60+1029.60=1188.20

Therefore, 26 child tickets were sold on Friday.

Answer:

20

Step-by-step explanation:

formula is 1/2(a+b)xh

a is long base b is short base

h is for height

since

a= 3

b=2

h=8

1/2(3+2)x8

so it be 5/2x8

so it be 5x 4 because 2 divide 8 which make it 4 then time it with 5

so answer is 20

Step-by-step explanation:

sand is 3 parts out of (1+3 = 4) parts  or 3/4 of the cement mixture

3/4  * 120 = 90 tonnes  of sand

A function can maintain similarity when it undergoes specific transformations that do not alter its overall shape. These

transformations include translations, reflections, and dilations.

Similar functions can be described as functions that have the same shape but may differ in size, position, or orientation.

1. Functions maintain similarity through specific transformations:

a. Translations: Functions can be shifted horizontally or vertically without changing their shape.

b. Reflections: Functions can be reflected over the x-axis or y-axis, and their shape remains the same.

c. Dilations: Functions can be scaled by a constant factor, which changes their size but maintains their shape.

2. To describe similar functions, we can observe the following characteristics:

a. They have the same shape.

b. They may differ in size due to dilations (scaling by a constant factor).

c. Their position or orientation may differ due to translations and reflections.

for such more question on  function

https://brainly.com/question/11624077

#SPJ11

The correct answer is gcd(Greatest common divisor)  and lcm(least common multiple) of 1000 and 625.

For more such question on gcd

https://brainly.com/question/28756880

#SPJ11

Answer:

b

Step-by-step explanation:

part a.   the total bus fare cost for Mrs Themba's family per week is R337.

part b. The cost per bus trip per child is found to be around R9.50.

Cost is described as an amount that has to be paid or spent to buy or obtain something.

The cost of a weekly bus pass from Blue Downs to Rondebosch =  R109.

We then find the , the total cost per week for Mrs. Theba's family

1 x R109+ 2 x R114  = R337

part b.

The cost of a weekly bus pass from Bellville to Cape Town =  R95.

We find the cost per bus trip per child as:

R95 /  10 = R9.50

So in conclusion,  the cost per bus trip per child is R9.50.

Learn more about cost at: https://brainly.com/question/25109150

#SPJ1

For the random variables, the marginal density functions are obtained to be -

fX(x) = 3/2 × (2-x)(1-x)², if 0 < x < 1 and 0 otherwise

fY(y) = 3/2 × y(2-y)², if 0 < y < 1 and 0 otherwise

What is marginal density function?

The definition of a marginal density function is a continuous variable's marginal probability. Without knowledge of the probabilities of the other variables, marginal probability is the likelihood that a certain event will occur. In essence, it provides the likelihood that a single variable will occur.

To find the marginal density functions, we need to integrate the joint density function over the range of the other variable.

First, we find the marginal density function of X by integrating the joint density function over the range of y -

fX(x) = ∫f(x,y)dy, from y=0 to y=1-x

fX(x) = ∫3(2-x)y dy, from y=0 to y=1-x

fX(x) = [3(2-x)/2][(1-x)² - 0]

fX(x) = 3/2 × (2-x)(1-x)², if 0 < x < 1

fX(x) = 0, if 1 ≤ x ≤ 2

Next, we find the marginal density function of Y by integrating the joint density function over the range of x -

fY(y) = ∫f(x,y)dx, from x=y to x=2-y

fY(y) = ∫3(2-x)y dx, from x=y to x=2-y

fY(y) = 3/2y[(2-y) - y]

fY(y) = 3/2 × y(2-y)², if 0 < y < 1

fY(y) = 0, otherwise

Therefore, the marginal density functions are -

fX(x) = 3/2 × (2-x)(1-x)², if 0 < x < 1 and 0 otherwise

fY(y) = 3/2 × y(2-y)², if 0 < y < 1 and 0 otherwise

To learn more about marginal density function from the given link

https://brainly.com/question/15109814

#SPJ1