Answer:
⁶¹₂₉Cu + ⁴₂He --->⁶⁵₃₁Ga
Explanation:
Nuclear reactions are reactions which occur with changes in the nucleus of an atom. Nuclear reactions usually occur with the release of large amounts of energy and radiation. Radiactive elements are elements that are involved in nuclearbreactions due to the unstable nature of their nucleus. They disintegrate spontaneously with the emission of radiations. The major types of radiations released during nuclear reactions are;
1, Alpha particles - these are positively charged radiations with strong ionizing power. Each alpha particle is a helium nucleus
2. Beta particles - these are very fast moving stream of electrons. They are negatively charged particles .
3. Gamma radiation - is a form of electromagnetic radiation.
In the alpha absorption of Cu-61, the proton number of the atom increases by 2 while the mass number increases by 4 and the Cu-61 atom is changed to Ga-65 atom. The nuclear equation is given as follows:
⁶¹₂₉Cu + ⁴₂He --->⁶⁵₃₁Ga
What type of product is formed when acids are added to some ionic compounds
Answer:
salt
Explanation:
When acid and base solutions react, they produce water and a neutral ionic compound called a salt.
Metamorphic rock usually forms
Answer:
Metamorphic rocks form sedimets
An -ate or -ite at the end of a compound name usually indicates that the compound contains *
fewer electrons than protons.
neutral molecules.
only two elements.
a polyatomic anion.
Explanation:
1.-Ate-contains 3 elements in which one is oxygen2.-ite-contains 3 elements in which one is Oxygen but the oxygen is less than that of -Ate3.-ide has 2 elementsThis catastrophic event hit Sumatra in 2004 and again in 2005, destroying huge amounts of property and killing thousands of people. It is an event generated by earthquakes. It is a A) tsunami. B) tornado. C) hurricane. D) water spout.
Answer: A
Explanation: I hope this helps!
Answer:
A or C. Best to go with A
Explanation:
Hope it works!!
The fastest man on Earth, Usain Bolt, runs at a speed of 10 meters per second. How
long would it take him to run 160 meters?
Calculate the pOH of a 7.68x10-7 M HCl solution.
pOH = (round to 3 sig figs)
Answer:
pOH = 7.89
Explanation:
As HCl is a strong acid, [H⁺] is equal to the original acid concentration. In other words:
[H⁺] = 7.68x10⁻⁷ MKnowing [H⁺], we calculate the pH of the solution:
pH = -log[H⁺]pH = 6.11With the pH, we can calculate the pOH of the solution, using the following formula:
pOH = 14 - pHpOH = 7.89What is the final temperature of a system if 10.0 grams of cold water, originally at 10°C is mixed with 120.0 grams of hot water, originally at 77.0°C?
A. 83.1°C
B. 100.0°C
C. 71.8 °C
D. 95.1°C
How would you expect the reaction profile of an endothermic reaction to look?
a. The reactants have more energy than the products.
b. The products have more energy than the reactants.
c. There is no activation energy.
d. The reactants and the products have the same energy.
Answer:
B. the products have more energy than the reactants.
which deflects winds to the right or left
Answer:
right
Explanation:
the air that circulates to the right is deflected, because of the earths gravitational rotation, and how its tilted.
differentiate between homogenous and heterogeneous catalysis
Explanation:
Homogeneous catalysts are those that occupy the same phase as the reaction mixture (typically liquid or gas), while heterogeneous catalysts occupy a different phase. Generally, heterogeneous catalysts are solid compounds that are added to liquid or gas reaction mixtures.
100 pts Horticulture (HURRY)
Which of the following facets of IPM control systems is most likely to focus on the diversion of pests from a commercial crop?
monitoring
avoidance
suppression
prevention
Answer:
Suppression
Explanation:
suppression is used to reduce pest populations below the economic threshold if prevention and avoidance tactics have failed--chemical, bio and cultural and other tactics are used which minimize environmental impacts
Answer:
i know im late again but its suppression
Explanation:
Drought is a weather condition. true or false
Answer:
true
Explanation:
drought is a period of unusually persistent dry weather that persists long enough to cause serious problems such as crop damage and/or water supply shortages. The severity of the drought depends upon the degree of moisture deficiency, the duration, and the size of the affected area.
Which substance is an Arrhenius acid?
A) HBr
B) NaBr
C) NaOH
D) NH3
Answer:
A
Explanation:
Answer:a
Explanation:
How many grams of Ca metal are produced by the electrolysis of molten CaBr2 using a current of 30.0 amp for
5.50 hours?
Answer: 123 g
Explanation: Q =It = nzF. For Ca^2+ z= 2, t = 5.5 x 3600 s and I = 30.0
And F= 96485 As/mol
Amount of moles is n = It /zF = 3.078 mol , multiply with atomic mass 40.08 g/mol
Which is the correct Lewis structure for carbon monoxide?
A.
A
B.
B
C.
C
D.
D
How many atoms are in 1.00 moles of Calcium (Ca)?
Answer:
One mole is equal to 6.02214179×1023 atoms, or other elementary units such as molecules.
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore number of atoms in 1.00 moles of Calcium (Ca) are 6.022×10²³ atoms.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. Mole is inversely proportional to molar mass.
Mathematically,
mole =given mass ÷ molar mass
Number of atoms = moles ×6.022×10²³ atoms
Substituting the values in above formula we get
Number of atoms = 1 ×6.022×10²³ atoms
Number of atoms 1 mole of calcium = 6.022×10²³ atoms
Therefore, number of atoms in 1.00 moles of Calcium (Ca) are 6.022×10²³ atoms.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Does wasting water also waste energy? Explain your reasoning.
Answer:
Yes.
Explanation:
Wasting household water does not ultimately remove that water from the global water cycle, but it does remove it from the portion of the water cycle that is readily accessible and usable by humans. Also, "wasting" water wastes the energy and resources that were used to process and deliver the water.
Answer:
I feel like there should be more parts to this question but I think it depends on how you got your water. If you waste water after you got it from a local stream yourself, you wasted your body energy but no real electricity of any kind. If the water is processed and filtered and you end up wasting it, I guess it counts as energy being wasted too? Because the sole purpose was to bring you clean water but you didn't utilize it
Please help as soon as possible
The molecules of which of the following would have the most kinetic energy?
A
boiling water
B
a cold glass of water
C
a warm cup of tea
D
an ice cube
Answer:
A
boiling water
Explanation:
The boiling point of water is 212 degrees F. Due to the temperature of the water being this high, the particles are sped up since heat increases kinectic energy.
A neutralization reaction occurs between sodium hydroxide and sulfurous acid. Complete the equation below for the neutralization reaction that ocurs during the titration
Answer:
2NaOH + H₂SO₃ → 2H₂O + Na₂SO₃
Explanation:
When a base as sodium hydroxide (NaOH) reacts with an acid as sulfurous acid (H₂SO₃), the H⁺ of the acid will produce with the OH⁻ of the base H₂O. Te complementary ions will produce the respective salt (Na₂SO₃):
NaOH + H₂SO₃ → H₂O + Na₂SO₃
To balance the sodiums:
2NaOH + H₂SO₃ → H₂O + Na₂SO₃
And the hydrogens:
2NaOH + H₂SO₃ → 2H₂O + Na₂SO₃And this is the complete reaction for this neutralization reaction.
Please help nowwww its important
Answer:
i think you're right
Explanation:
Answer:
It looks right
Explanation:
The graph goes right over August
can send me the answer plzzz
Answer: In balancing any chemical equations, the number of atoms of each elements on the reactant side is equals to the number of atoms of the elements on the product side.
Explanation:
Balanced Chemical equations are those equations that has the equal number of atoms of elements on both the reactants and the product sides. To ensure that the chemical equations are correctly balanced the following steps should be observed.
--> identify the elements on the reactant side and on the product side
--> identify the number of atoms of each elements.
--> multiply the number of atoms with the number that will give you a coefficient that will make both the reactant and product sides equal.
--> place the new numbers infront of the elements or compounds.
--> A final check is done to know if the equation is balanced.
From the above steps, the balanced equation of the above questions are listed below:
1.) AlBr3 + 3K ---> 3KBr + Al
2.) FeO + PdF2 --> FeF2 + PdO
3.) P4 + 6Br2 --> 4PBr3
4.) 2LiCl + Br2 --> 2LiBr + Cl2
5.) PbBr2 + 2HCl --> 2HBr + PbCl2
6.) 2CoBr3 + 3CaSO4 --> 3CaBr2 + Co2(SO4)3
7.) 2Na3P + 3CaF2 --> 6NaF + Ca3P2
8.) 2Mn + 6HI --> 3H2 + 2MnI3
9.) Li3PO4 + 3NaBr --> Na3PO4 + 3LiBr
10.) CaF2 + Li2SO4 --> CaSO4 + 2LiF
11.) 2HBr + Mg(OH)2 --> MgBr2 + 2H2O
12.) 2LiNO3 + CaBr2 --> Ca(NO3)2 + 2LiBr
13.) AgNO3 + Li --> LiNO3 +Ag
14.) Si(OH)4 + 4NaBr --> SiBr4 + 4NaOH
15.) 2NaCN + CuCO3 --> Na2CO3 + Cu(CN)2
16.) 2NH3 + H2SO4 --> (NH4)2SO4
When salt dissolves in water:
A. intermolecular forces in the solute are broken and new ion-dipole forces in the solution are formed
B. ionic bonds in the solute are broken and new intermolecular forces in the solution are formed intermolecular forces in the solute are broken and new intermolecular forces in the solution are formed
C. ion-dipole forces in the solute are broken and new ion-dipole forces in the solution are formed
D. ionic bonds in the solute are broken and new ionic bonds in the solution are formed
E. ionic bonds in the solute are broken and new ion-dipole forces in the solution are formed
F. ion-dipole forces in the solute are broken and new intermolecular forces in the solution are formed
G. intermolecular forces in the solute are broken and new ionic bonds in the solution are formed
H. ion-dipole forces in the solute are broken and new ionic bonds in the solution are formed
Answer:
ionic bonds in the solute are broken and new ion-dipose forces in the solution are formed
Explanation:
What is an Ore? ufhfjfnf
Answer:
ore is naturally occuring solid material from which a metal or valuable mineral can be extracted
profitably.
Which of the following statements explains which trial has a lower concentration of the reactant? (5 points) Trial 1, because the average rate of the reaction is lower. Trial 1, because this reaction lasted for a longer duration than Trial 2. Trial 2, because this reaction was initially fast and later slowed down. Trial 2, because the v
Answer:
A)Trial 1 because the average rate of reaction is lower.
Explanation:
I accidentally gave myself low rating my bad
The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
What is a Chemical reaction?Chemical reaction refers to reaction that take place between reacting substances in which the chemical substances are transformed to products.
When the concentration of the reactants increases, more molecules tend to interact with each other in order to form new compounds, and the rate of reaction increases. When the concentration of the reactants reduces, there are little of that molecule present, and the rate of reaction decreases
Therefore, The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
Learn more about chemical reaction below.
https://brainly.com/question/16416932
differentiate between a promoter and an inhibitor
Promoters are substances that increase the catalytic activity, even though they are not catalysts by themselves.
Inhibitors are sometimes referred to as "negative catalysts" since they decrease the reaction rate.
The speed of sound in air is four times as its speed in steel true or false?
Answer:
.....false
Explanation:
the particles in the air are packed apart whereas the particles in steel are closely packed and sound travel faster in solids than in gasses..
Answer:
False
Explanation:
The speed of sound is quickest in mediums that have their molecules close apart. The speed of sounds is quickest in solids, followed by liquids, and slowest in gasses. The close the molecules are together, the quicker sound travels. The sound would travel faster in the steel than in the air.
This is due to the fact that sound waves are compression waves. This means that they rely on the way molecules collide with one another and act sort of like a spring.
Fun fact: In the old days, people used to put their ears to the train tracks to see if a train is coming. Sound moves so fast in metal that they can sense the vibrations miles before the train arrived.
Please mark this as brainliest if this helped you!
A pool float was filled with air to capacity in the middle of a hot day. The next morning the pool float looked different yet no gas escaped or entered the float. Describe what you think the float looked like in the morning and why it occurred.
Answer:
The pool float looked would have looked deflated the next morning.
Explanation:
When temperature decreases the volume decreases.
What is the element of H₂O
Answer:
It’s water bro
Explanation:
How many atoms are in 34.2 grams of carbon?
Answer:
6.02*1022
Explanation:
I don't know why
the mass of a subatomic particle compared to the mass of a proton
Answer:
neutron
Explanation:
Hopefully this will help you!!!!