(590-4(C)) Type NM and NMC cables can be used for temporary wiring in structures of a height of 6 feet, 12 feet, or 18 feet.(True/False)

True. When a grounded box is surface-mounted, the receptacle may be grounded to the box by making direct metal-to-metal contact with the device yoke. The grounding terminal of the receptacle should still be connected to the box via an equipment bonding jumper, though.

According to the National Electrical Code (NEC) section 250-146(A), an equipment bonding jumper must be used to connect the grounding terminal of a grounding-type receptacle to a grounded box. This is necessary to provide a low-impedance path for fault current and to ensure proper grounding of the receptacle. However, in cases where the box is surface mounted, direct metal-to-metal contact between the device yoke (the metal frame surrounding the receptacle) and the box is also permitted to ground the receptacle to the box. This is because the surface-mounted box is already grounded due to its connection to the building's electrical system. Nonetheless, the use of an equipment bonding jumper is still recommended to ensure a reliable and safe ground connection.

Learn more about Receptacle Bonding Requirements here.

https://brainly.com/question/23839796

#SPJ11

The term used when a water utility divides its total operating expenses into the total revenue is the operating ratio. This ratio is an important financial metric used by utilities to measure their efficiency and profitability.

The operating ratio is calculated by dividing the total operating expenses by the total revenue. This ratio provides insight into the efficiency of the utility's operations and can be used to identify areas where cost savings can be achieved. A lower operating ratio indicates that the utility is more efficient in its operations, while a higher operating ratio indicates that the utility is less efficient and may be spending too much on operating expenses.

In the case of a water utility, operating expenses would include items such as labor costs, maintenance expenses, and equipment costs, among others. By monitoring the operating ratio, the utility can ensure that it is operating in a financially sustainable manner while still providing reliable service to its customers.

Learn more about utility here: brainly.com/question/31385674

#SPJ11

The horizontal part of the stairs you step on is called the "tread". The tread is the part of the stair that provides a flat surface for you to step on as you ascend or descend the stairs.

Stairs are a common feature in architecture and are used to provide access between different levels of a building. They are typically made up of a series of treads and risers that are arranged in a vertical sequence. Stairs can be constructed using a wide range of materials, including wood, metal, concrete, and stone, and can be designed to match the style of the building they are located in. Stair design is an important consideration in building construction, as it must provide a safe and comfortable means of accessing different levels of the building. Stairs must also comply with building codes and safety standards to ensure that they are structurally sound and safe to use.

Learn more about the stairs here:

https://brainly.com/question/28720025

#SPJ11

It is important to always use caution when handling network devices, especially if they are damaged or malfunctioning. If in doubt, it is always best to consult a qualified technician or IT professional for assistance.

A faulty network device can create a source of hazard for a user in the following ways: Electric shock: If a network device is not properly grounded or has exposed wires or components, it can create a risk of electric shock to the user if they come into contact with it. This can be especially dangerous if the user is handling the device while it is powered on or connected to a power source. Fire hazard: If a faulty network device overheats or experiences a short circuit, it can create a risk of fire hazard to the user and their surroundings. This can be especially dangerous if the device is located in an area with flammable materials or if the user is unable to quickly disconnect the device from the power source.

Learn more about network devices here:

https://brainly.com/question/30011906

#SPJ11

 The percent defects in services and purchased materials is typically a measure of supply chain performance for the Quality Management core process. This process focuses on maintaining high standards and reducing defects in products and services throughout the supply chain.

Percent defects in services and purchased materials is typically a measure of supply chain performance for the core process of quality control and assurance. This process is critical in ensuring that all materials and services purchased by the organization meet the required standards and specifications, and that they are free from defects or errors that could impact the overall quality and performance of the end product or service. By monitoring and measuring the percent defects in the supply chain, organizations can identify areas for improvement and implement corrective actions to optimize their operations and enhance customer satisfaction.

Learn more about management here-

https://brainly.com/question/14523862

#SPJ11

A subsystem of the emergency system consisting of feeders and branch circuits is defined as an "Emergency Lighting and Power System" in accordance with the National Electrical Code (NEC) section 517.2.

In an automatic emergency lighting and power system, the emergency power source takes over when the ship's service power and lighting plant's potential drops, supplying electricity to the emergency loads.

Emergency lighting is used to provide light in case of a power outage or other disruption to the main power source. A fire or a power outage may cause the loss of mains electricity.

What is the power source for the emergency lights?

Emergency lighting is connected to the building's electrical system so that internal batteries can be continuously recharged to provide backup power for the lighting. This makes sure that during a power loss, the lights stay on, enabling building residents to find the exits with ease in the event that they need to escape.

To know more about Power System, click here:

https://brainly.com/question/28528278

#SPJ11

A DDR3 DIMM (Dual In-line Memory Module) typically has 240 notches, which are the small notches on the connector edge of the module.

A DDR3 DIMM (Double Data Rate 3 Dual In-Line Memory Module) is a type of RAM module used in computers and other electronic devices to store data.

DDR3 DIMMs have a single notch located near the center of the module's bottom edge, which is used to differentiate it from other types of memory modules like DDR2 and DDR4, which have their notches in different positions.

This notch ensures compatibility with the correct motherboard slot and prevents incorrect installation. The DDR3 DIMM's increased speed and efficiency compared to its predecessors make it a popular choice for modern computer systems.

Learn more about DDR3 DIMM at

https://brainly.com/question/31567299

#SPJ11

For thick customers, RAID 1, commonly referred to as mirroring, might be a cheap redundant storage solution. It includes mirroring the data over two hard drives to provide redundancy in the event of disc failure.

RAID 1, also known as mirroring, can be an inexpensive and simple solution for providing redundancy in storage for thick clients. It involves using two hard drives where one drive mirrors the other, creating an identical backup of the data. This means that if one drive fails, the other can continue to function seamlessly without any data loss or downtime. While RAID 1 provides redundancy, it is important to note that it does not increase performance or capacity, as the mirrored backup uses the same amount of storage as the primary drive. Nonetheless, RAID 1 remains a popular choice for users seeking an inexpensive and reliable way to safeguard their data.

Learn more about RAID 1 for Thick Clients here.

https://brainly.com/question/14669307

#SPJ11

1. Forwarding the Telnet packets to the destination network, 2. Performing address translation between different network address types (e.g. MAC and IP addresses). 3. Enforcing security policies by inspecting and filtering the Telnet traffic.

Intermediary network devices, such as routers and firewalls, play a crucial role in facilitating communication between the host and the Telnet server on a remote network. These devices are responsible for forwarding the Telnet packets from the source host to the destination network, translating between different network address types to ensure proper routing, and enforcing security policies to protect against unauthorized access or malicious activity. For example, a firewall may inspect and filter Telnet traffic to prevent unauthorized access attempts or to detect and block malware or other threats. Without these intermediary network devices, communication between the host and Telnet server would be impossible or insecure.

learn more about network here:

https://brainly.com/question/14276789

#SPJ11

According to the National Electric Code (NEC) section 334.15(C), when NMC cable is run at angles with joists in unfinished basements, it shall be permissible to secure cables not smaller than two conductor's directories to the lower edge of the joist. This means that the cable must be secured to the joist in a way that prevents it from sagging or moving, and it must not be smaller than two conductors in size.

When running NMC cable at angles with joists in unfinished basements, it is permissible to secure cables not smaller than two conductors directly to the lower edge of the joist. Here's the step-by-step explanation:

1. Identify the location: In this case, it's an unfinished basement with joists.
2. Determine the cable type: You mentioned NMC cable, which is a nonmetallic-sheathed cable.
3. Consider the installation method: The cable is run at angles with joists.
4. Check the permissible conductor size: Based on the guidelines, secure cables not smaller than two conductors directly to the lower edge of the joist.

Learn more about NMC cable here: brainly.com/question/31566099

#SPJ11

To ensure a successful engineering solution, several requirements must be met, the solution must be technically feasible, meaning it can be developed and implemented using existing technology and knowledge.

Secondly, it should be economically viable, meaning the costs associated with designing, building, and operating the solution are justifiable by the benefits it provides. Thirdly, it should meet the intended purpose and performance requirements, which means it must effectively address the problem it was designed to solve. Additionally, the solution must be safe and reliable, meeting all relevant safety standards and regulations.

Finally, it should be sustainable, considering its environmental impact and the long-term viability of the solution. By meeting these requirements, an engineering solution can be considered successful.

Learn more about engineering solution: https://brainly.com/question/28321052

#SPJ11

Sizing of small appliance two wire circuits in dwelling units shall be based on a minimum of 20 volt-amperes (VA) per each circuit, according to section 220.52(a) of the National Electrical Code (NEC).

This requirement ensures that there is sufficient electrical capacity to power the various small appliances and devices that are commonly used in a typical dwelling unit kitchen, such as microwaves, toasters, blenders, and coffee makers. The NEC also requires that at least two small appliance circuits be installed in each dwelling unit kitchen, and that these circuits be dedicated solely to powering small appliances and not be used for other loads. By providing dedicated circuits with sufficient capacity, the risk of overloading the circuits and causing electrical fires or damage to appliances is reduced, helping to ensure the safety and reliability of the electrical system in the dwelling unit.

Learn more about appliance here:

https://brainly.com/question/27276396

#SPJ11

The formula for calculating the "No Pay" adjustment for a rolling straight edge deficiency found on a friction course layer is:

No Pay = (Length of deficiency in feet) x (Depth of deficiency in inches) x (Contract unit price per square yard) / 9

The contractor and the engineer have the option of accepting a "No Pay" modification rather than removing and rebuilding the defective portion when a rolling straight edge deficit is discovered on the friction course layer of an asphalt pavement. The No Pay adjustment is determined by the breadth and depth of the deficit as well as the per-square-yard contract unit pricing. The adjustment is determined by using the following equation: No Pay = (Length of Deficiency in Feet) x (Depth of Deficiency in Inches) x (Contract Unit Price per Square Yard) / 9. The reduction in payment that the contractor will receive for the subpar performance is calculated using this method.

learn more about contractor and the engineer here:

https://brainly.com/question/30358104

#SPJ11

True. The relational database model is currently the most widely used database model in industry and academia.

It organizes data into tables consisting of rows and columns, with relationships between tables defined by keys. Relational databases provide a flexible and scalable way to store and manage structured data, and are used in a wide range of applications, from financial systems to social media platforms. While other database models, such as NoSQL and object-oriented databases, have gained popularity in recent years, the relational model remains the dominant choice for many organizations due to its well-established standards and widespread support.

Learn more about organizes data here:

https://brainly.com/question/28335869

#SPJ11

"Except for specially designed recessed fixtures, thermal insulation is not permitted within 3 inches of a lighting fixture, enclosure, wiring compartment, or ballast."

The National Electrical Code (NEC) specifies in section 410.104(b) that thermal insulation should not be placed within 3 inches of a lighting fixture, enclosure, wiring compartment, or ballast. This is because such insulation can trap heat generated by the fixture or its components, leading to overheating and potentially causing a fire hazard. However, specially designed recessed fixtures are an exception to this rule, as they are specifically designed to accommodate insulation without causing a fire hazard. It is important to adhere to this code to ensure the safety of the building and its occupants.

Learn more about thermal insulation here:

https://brainly.com/question/27932945

#SPJ11

The longitudinal modulus is 177.25GPa .

The longitudinal tensile strength is 2640GPa .

The expression for longitudinal tensile strength is used to calculate the value of longitudinal tensile strength for the provided composite.

The values of longitudinal fiber strength, elastic modulus of fiber and elastic modulus for matrix are substituted in the expression to get the final answer.

The longitudinal modulus is:

= 245(0.65) + 70(0.35)

=177.25GPa .

The longitudinal tensile strength is:

= 3500(0.65 + 70/235 0.35)

= 2640GPa .

Learn more about modulus on

https://brainly.com/question/23450491

#SPJ4

Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because they can obstruct the airflow and hinder the unit's ability to condense and release heat properly, which can lead to reduced efficiency and potentially cause damage to the unit.

Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because this ensures proper airflow and prevents debris from obstructing the unit's functionality, thus maintaining its efficiency and prolonging its lifespan.

Learn more about branches here: brainly.com/question/14165530

#SPJ11

Two features of a physical, star network topology are: 1. Centralized control: In a star topology, all network nodes are connected to a central hub or switch.

This hub or switch controls the communication between the nodes, allowing for centralized management and control of the network.

2. Scalability: A star topology allows for easy scalability, as nodes can be added or removed without affecting the rest of the network. This makes it a flexible option for networks that may need to expand or change over time.

Two features of a physical star network topology are:

1. Central Hub: In a star topology, all devices are connected to a central hub or switch, which manages and controls the network traffic. This central hub is responsible for transmitting data packets between devices on the network.

2. Point-to-Point Connections: Each device in a star network is directly connected to the central hub via individual cables or links. This ensures that if one connection fails, it does not affect the other devices on the network, thus providing greater fault tolerance and easier troubleshooting.

Learn more about network click  here:

brainly.com/question/14276789

#SPJ11

According to the National Electrical Code (NEC) 500.5(C), Class II locations are those that are hazardous because of the presence of combustible dust.

Class II locations are those that are hazardous because of the presence of combustible dusts. This is defined in section 500.5 (C) of the National Electrical Code (NEC). Combustible dusts can ignite and cause fires or explosions if they are not properly managed and controlled. Examples of materials that can create combustible dusts include grain, sugar, metals, and plastics. Special electrical equipment and wiring methods are required in Class II locations to prevent sparks and arcs from igniting the dust.

Learn More about National Electrical Code here :-

https://brainly.com/question/17215290

#SPJ11

Explanation:

The primary purpose of subnetting IPv6 address space is to improve address allocation efficiency by subnetting a segment of a network address space.

please make me brainalist and keep smiling dude

Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained.
Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained. This is because private instance variables cannot be accessed or modified directly from outside the class, and therefore can only be accessed or modified through the public set methods. Additionally, if the set methods perform validity checking on the data being set, this further ensures that the object's data remains consistent and valid.

Learn more about data integrity here

https://brainly.com/question/31076408

#SPJ11

True. When running armor cable on the side of rafters, studs, or floor joists in an accessible attic, protection is required for the cable with running boards.

This is because the sharp edges of the metal framing members can damage the cable's insulation, which can create a dangerous situation. Running boards provide a smooth surface for the cable to rest on, protecting it from any potential damage.

When armor cable, also known as armored cable or BX cable, is run on the side of rafters, studs, or floor joists in an accessible attic, protection is required for the cable with running boards. This requirement is in place to ensure the cable's safety and prevent any potential damage caused by external factors, such as accidental contact or environmental elements.

To further explain the process, here's a step-by-step breakdown:

1. First, the armor cable is installed along the side of rafters, studs, or floor joists within an accessible attic space. The armored cable is specifically designed to provide additional protection for the electrical conductors inside, thanks to its metal sheathing.

2. Next, running boards are used to provide further protection for the armor cable. Running boards are flat, narrow boards that are typically made of wood or non-conductive material. They serve as a protective barrier between the armor cable and any potential external forces that may come into contact with it.

3. The running boards are securely fastened to the rafters, studs, or floor joists, ensuring that the armor cable is appropriately protected and that the cable does not come into direct contact with any potential hazards.

4. By utilizing running boards in this manner, the armored cable's integrity is maintained, and the risk of damage, short circuits, or electrical fires is significantly reduced.

In conclusion, it is True that when armor cable is run on the side of rafters, studs, or floor joists in an accessible attic, protection is required for the cable with running boards. This protective measure helps ensure the cable's safety and overall longevity.

Learn more about cable here : brainly.com/question/30424450

#SPJ11

If an airplane is loaded to the rear of its CG (center of gravity) range, it will tend to be unstable about its longitudinal axis. This is because the distribution of weight affects the airplane's pitching moment and stability, with the rearward shift of CG increasing the potential for a nose-up pitching tendency.

The longitudinal axis runs from the nose to the tail of the airplane and is the axis around which the airplane pitches (nose up or nose down). If the center of gravity is too far back, it can cause the tail of the airplane to become too heavy, making it difficult to control the pitch of the airplane. This can lead to a dangerous situation where the airplane is difficult to control and may even stall or spin. It is important for pilots to ensure that their airplane is loaded within the proper CG range to maintain stability and safety in flight.

Learn more about gravity here-

https://brainly.com/question/31321801

#SPJ11

The use of reinforced concrete walls, ceilings, and floors in vaults is intended to provide extra strength and durability.

This construction method involves adding additional steel bars or mesh to the concrete mix to improve its tensile strength, which makes it more resistant to cracking and breaking under pressure. Similarly, the hardened steel door is designed to withstand significant force or impact, making it virtually impenetrable. Overall, the combination of reinforced concrete and hardened steel makes vaults extremely secure and difficult to breach.

To learn more about vaults click the link below:

brainly.com/question/26255180

#SPJ11

The statement "The accumulated time of a TOF (Timer Off-Delay) timer is reset by causing the ring to go true momentarily" is true because, In a TOF timer, the accumulated time is the time that has elapsed since the timer's input signal turned off.

The timer starts counting down when its input signal goes from true to false. During the countdown, if the input signal becomes true again momentarily, the accumulated time of the TOF timer will be reset. This means that the timer starts its countdown all over again from the preset time value once the input signal goes back to false.

This reset feature allows the timer to be flexible in its operation, enabling it to adapt to changes in the input signal and maintain the desired off-delay time. In practical applications, this can be useful in cases where the input signal may experience fluctuations or intermittent changes before the actual need for the output action occurs.

In summary, the accumulated time of a TOF timer is reset by causing the input signal to momentarily go true, ensuring that the timer maintains the desired off-delay time and adapts to changes in the input signal.

You can learn more about input signals at: brainly.com/question/31044123

#SPJ11

Receptacles incorporating an isolated grounding connection shall be identified by an orange triangle located on the face of the receptacle. This is required by code section 406.3(d).

The purpose of this identification is to ensure that users are aware of the presence of an isolated grounding connection and use it properly for electrical safety.Yes, that is correct. Receptacles incorporating an isolated grounding connection shall be identified by an equilateral triangle located on the face of the receptacle. This triangle shall be a green color and shall be located at the bottom of the receptacle opening where visible after installation. (Reference: NEC 2017, Article 406.3(D))

To learn more about receptacle click the link below:

brainly.com/question/28215225

#SPJ11

C. Router. The router device forwards data and operates at three of the transmission control protocol internet protocol TCP IP model.

A router is a networking device that functions at the Network layer, Data Link layer, and Physical layer of the TCP/IP paradigm. It examines destination IP addresses to decide which network interface to use for packet forwarding and utilizes routing tables to establish the optimum route for moving data packets between networks. Data is sent between devices connected to the same network using MAC addresses at the Data Link layer, and between networks and devices using physical network interfaces at the Physical layer. Routers are essential to network components that provide quick and safe data transfer between networks and devices.

learn more about TCP IP model here:

https://brainly.com/question/30544746

#SPJ11

Outlet boxes intended to enclose flush devices shall have internal depth of not less than 1 1/4 inches according to section 314.24 of the National Electrical Code.

Ampacity is a word used to  expalin ampere capacity defined by National Electrical Codes.

Ampacity is defined as the maximum current, in amperes, that can flow in a conductor continuously under the conditions of use without exceeding the temperature rating of the conductor.

Therefore, in the National Electrical Code, the current carrying abilities of conductors are called the Ampacity.

formally certifying that all valid internal and external standards are complied with by your goods and services. The accreditation you hold attests to your marketability. To support that reputation, Intertek continues to hold a wide range of accolades and accreditations from throughout the world for our testing and certification services.

Learn more about National Electrical here

https://brainly.com/question/30391001

#SPJ11

Answer: Electrical nonmetallic tubing, also known as ENT, is a type of conduit that is used to protect and route electrical wiring in residential and commercial buildings. It is made of a plastic material that is lightweight, flexible, and easy to install. When it comes to installing ENT in a concrete slab on grade, there are specific requirements that must be followed to ensure safety and compliance with building codes.

Explanation:

According to section 362-10(6) of the National Electrical Code, ENT and fittings are permitted to be installed in a concrete slab on grade as long as the tubing is placed upon sand or approved screenings. This means that the tubing must be supported by a layer of sand or other approved material to prevent it from being crushed or damaged by the weight of the concrete.

When installing ENT in a concrete slab on grade, it is important to choose the right type of tubing and fittings for the job. ENT comes in different sizes and thicknesses, so it is important to choose the right size for the wiring being installed. Fittings such as couplings, elbows, and tees must also be selected carefully to ensure a proper fit and to prevent leaks.

Overall, installing electrical nonmetallic tubing in a concrete slab on grade requires careful planning and attention to detail. By following the guidelines set forth by the National Electrical Code and using high-quality tubing and fittings, electricians can ensure a safe and reliable installation that meets the needs of their clients.
Hi! I understand that you would like me to use the terms "Electrical," "tubing," and "200 words" in my response. Here is the answer to your question:

Electrical nonmetallic tubing (ENT) and fittings shall be permitted to be "encased" in a concrete slab on grade where the tubing is placed upon sand or approved screenings.

Step-by-step explanation:

1. Electrical: The term "electrical" refers to the system and components that involve the distribution and use of electricity. In this case, it specifically relates to the nonmetallic tubing and fittings used for electrical installations.

2. Tubing: In this context, "tubing" refers to the electrical nonmetallic tubing, which is a flexible conduit designed to protect and route electrical wiring within a structure. ENT is made from nonmetallic materials, such as PVC, and is often used in concrete slabs on grade.

3. Encased: The term "encased" means that the tubing and fittings are embedded or surrounded by the concrete slab, providing protection and support for the electrical system.

In summary, the code allows for electrical nonmetallic tubing and fittings to be encased within a concrete slab on grade as long as they are placed upon sand or approved screenings, ensuring proper installation and safety.

Learn more about ENT here : brainly.in/question/12742463

#SPJ11

While both events involve nuclear fusion reactions, they occur in different types of binary star systems and have different mechanisms for producing the observed phenomena.

None of the options provided is entirely correct. An X-ray burst in an X-ray binary system and a nova are both types of astronomical events, but they are not similar in all the ways listed. An X-ray burst is a sudden, intense burst of X-ray radiation that occurs in some X-ray binary star systems. These systems consist of a neutron star or a black hole in close orbit with a companion star. The X-ray burst is thought to occur when matter from the companion star accumulates on the surface of the neutron star and undergoes a runaway nuclear fusion reaction, resulting in the emission of a burst of X-rays. A nova, on the other hand, is a sudden, temporary brightening of a star that occurs in a binary star system consisting of a white dwarf and a companion star. In a nova, material from the companion star falls onto the surface of the white dwarf, causing a nuclear fusion reaction that releases a large amount of energy and produces a sudden increase in brightness.

Learn more about fusion reactions here:

https://brainly.com/question/31461203

#SPJ11