5.68 allied health acetylsalicylic acid (aspirin) can be synthesized by combining salicylic acid and acetic acid through a condensation reaction. the group from phenol on the salicylic acid condenses with the carboxylic acid group of acetic acid, forming acetylsalicylic acid. draw the structure of acetylsalicylic acid.

Based on the data given, we can make a simple proportion to calculate that 91.57 grams of manganese would be produced by the decomposition of 144.9 grams of the powder.

The initial composition of the powder tells us that in 86.94 g of it there are 54.94 grams of manganese. We can make a simple proportion to calculate how many grams of manganese are produced by decomposing 144.9 grams of the powder:

86.94 grams of powder : 54.94 grams of Mn = 144.9 grams of powder : X

X = 54.94 grams of Mn * 144.9 grams of powder / 86.94 grams of powder

X = 91.57 grams of Mn

You can learn more about decomposition reactions here:

brainly.com/question/8009068

#SPJ4

Pancakes are warmth due to conduction. When there is conduction in a system, there is change in temperature and energy.

When a system absorbs or loses warmth, the common kinetic energy of the molecules will exchange. Consequently, warmth transfer effects in a change inside the machine's temperature so long as the machine is not undergoing a segment trade.

The change within the inner power of a gadget is the sum of the heat transferred and the paintings carried out. The heat glide is same to the exchange within the inner energy of the device plus the work performed.

When the temperature of an object will increase, the average kinetic energy of its particles increases. When the average kinetic power of its debris will increase, the object's thermal energy increases. consequently, the thermal energy of an object will increase as its temperature increases.

Inner strength is the whole kinetic energy and capacity power of all the particles, atoms and molecules that make up a system. Heating adjustments the energy stored within the system by growing the strength of the debris that make up the system.

Learn more about temperature here:- https://brainly.com/question/19795404

#SPJ1

To calculate the number of barium atoms present in two moles of barium, we need to multiply the moles of barium by Avogadro's number (B)

A mole of a compound contains 6.022 x [tex]10^{23}[/tex] atoms.

6.022 x [tex]10^{23}[/tex] atoms is the Avogadro’s number which denotes the molecular weight in grams.

Thus, one mole of barium would have 6.022 x [tex]10^{23}[/tex] barium atoms

Therefore, two moles of barium would be multiplication of number of moles of barium by Avogadro’s number

Two moles of barium = 2 * 6.022 * [tex]10^{23}[/tex] = 12.044 * [tex]10^{23}[/tex]

To know more about Avogadro’s number

https://brainly.com/question/11907018

#SPJ1

A substance diffuses when it moves from a region of high concentration to one of low concentration. Because the particles in liquids and gases travel randomly from one location to another, diffusion occurs in these media. For living things, diffusion is a crucial process because it governs the flow of materials into and out of cells.

A net migration of anything from a zone of higher concentration to a location of lower concentration can also be described as it, and a gradient in concentration is what's driving it.

Without spending the cell's energy, substance that crosses a cell membrane travels away from the region where it is concentrated.

Passive transport is the term for it.

It is the process by which substances migrate down the gradient of concentration without utilizing cellular energy.

Simple diffusion is another name for it.

Due to the difference in concentration from the perfume bottle to the outside environment, when a perfume bottle is opened, particles disseminate in the air.

While, active transport substances should move in the opposite direction of the concentration gradient, or toward the area of higher concentration.

Energy is needed for this procedure.

To know more about diffusion, click on the link below:

https://brainly.com/question/14245763

#SPJ9

The simplest molar ratio in which lithium reacts with nitrogen is 6 moles of lithium to 1 mol of nitrogen.

What is molar ratio?

A molar ratio examines the ratio that exist between two chemical compounds showing the amounts in moles of the compounds involved in a chemical reaction.

Molar ratio = amount of a constituent in moles ÷ total amount of all constituents in a mixture in moles

Given:

Mass of lithium (Li) = 4.2 g

Mass of  nitrogen (N2) = 2.8 g

Total amount of mass = 7g

Moles = molecular weight  ÷  mass of water

Moles of lithium (Li) = 4.2 ÷ 7 = 0.60 mol

Moles of nitrogen (N₂) = 2.8 ÷ 7 =  0.10 mol

Therefore, ratio Li : N₂ = 0.60 : 0.10 = 6 : 1

6 Li + N₂

The balanced equation between lithium and nitrogen, to form lithium nitride = 6 Li + N₂ → 2 Li₃N₆L i + N₂ → 2Li₃N

In summary, the simplest molar ratio in which lithium reacts with nitrogen is 6:1

Learn more about molar ratio here: brainly.com/question/14677248

#SPJ1

The true statements about the electron sea model is;

The term bonding has to do with the situation in which there is a combination of the atoms that come from two or more elements. Now let us note that formation of a bond means that the properties of the elements would cease to be individually observed once a bond has been formed.

Having said this, let us talk about the metallic bond. The metallic bond is the kind of bond that occur between the positive ions of the metal and the electron cloud or sea that have left the ions. It then follows that the bond is formed by the electrostatic interference that occurs between the electron sea and the positive ions.

Learn more about electron sea model:https://brainly.com/question/12147661

#SPJ1

Explanation:

External force of 220 applied on a pistan of a cylinder containg 1.25 ammonia gas move 10cm as shown in diagram below

The pre-partition salicylic acid solution (not mixing with chloroform) serves a second propose to act as a standard for linear regression analysis.

What is salicylic acid?

The chemical formula for salicylic acid is HOC6H4CO2H. It is a colorless, bitter-tasting substance that serves as both an aspirin precursor and metabolite (acetylsalicylic acid). It is a plant hormone that has been classified as an experimental teratogen by the EPA's Toxic Substances Control Act (TSCA) Chemical Substance Inventory. The word for willow tree in Latin is salix. Some anti-acne products contain it as an ingredient. Salicylates are the name for the salts and esters of salicylic acid.

The pre-partition salicylic acid solution (not combining with chloroform) acts as a benchmark for linear regression analysis in addition to serving as a comparison to the post-partition salicylic acid solution.

To know more about salicylic acid, go to link

https://brainly.com/question/14925906

#SPJ9

Electrons are the components of the atom that are found outside of the nucleus.

In contrast to protons and neutrons, which are found inside the atom's nucleus, electrons are found outside the nucleus. Negative electrons are drawn to the positive nucleus because their opposing electric charges attract one another. This force of attraction keeps electrons flowing continuously in the otherwise empty area surrounding the nucleus, this force of attraction keeps electrons flowing continuously.

Since they are so tiny, electrons. Since an electron's mass is only a tiny fraction of that of a proton or neutron (approximately 1/2000), it is almost entirely absent from the overall mass of an atom. Electrons have an electric charge of -1, which is equivalent to but in the opposite direction of the proton's electric charge of +1.

Since there are exactly as many electrons in an atom as there are protons, the positive and negative charges "balance out," leaving the atom electrically neutral.

Learn to know more about protons on

https://brainly.com/question/1805828

#SPJ9

33.34 J of energy it would take to raise the temperature.

Specific heat = J/g C

(25.35 J/mole C) x (1 mole / 107.8682g) = 0.2350 J/g C

Energy required = (mass in grams)x(Specific heat)x(Temp final - Temp initial)

= (8.20 g)(0.2350 J/g C)(17.3°C) = 33.34 J (units cancel for /g C)

Heat capacity or specific heat is the quantity of heat consistent with unit mass that is required to elevate the temperature with the aid of 1°C. particular warmness is helpful in figuring out the processing temperatures and quantity of warmth vital for processing and may be helpful in differentiating between  polymeric composites.

The specific heat capacity (or in reality, the specific heat), that's the heat potential according to unit mass of a material. Experiments show that the transferred heat relies upon on three factors: (1) The change in temperature, (2) the mass of the system, and (3) the substance and phase of the substance.

The specific heat is the quantity of heat energy per unit mass required to elevate the temperature by way of one degree Celsius. The connection between warmth and temperature change is commonly expressed inside the form shown under where c is the unique warmness .

Learn more about Specific heat here:- https://brainly.com/question/21406849

#SPJ1

To discover the number of atoms in a piece, divide its importance in grams by the periodic table's amu atomic mass, then multiply the result by Avogadro's number: 6.02 x 1023.

To learn more about atoms, refer  to:

https://brainly.com/question/23390564

#SPJ4

Answer: The nucleus is missing in both. Each has a different mass. Both have the same properties. Each has a different number of electrons.

Explanation: Thank me please! have a great day! :)

Answer:

regulate temperature and remove waste

Answer: the molecular altatude of the supercalifragilistic gene should expand by 100%,

L

L

L

L

L

L

L

L

L

L

L

Explanation:

Answer: fermentation

Explanation:

A block of lead has dimensions of 4.50 cm by 5.20 cm by 6.00 cm, the density of lead  is mathematically given as

x= 11.30 g/cm^3

This is further explained below.

Generally, in order to determine the lead's specific gravity; To begin, we would use the formula to find out how much space the block of lead takes up;

Volume= length  * width  *  height

After plugging the values into the formula, we get the following:

Volume = 4.50 * 5.20 * 6.00

Volume = 140.4 cm^3

The next thing that we do is determine the density of lead;

After plugging the values into the formula, we get the following:

X = 11.30 g/cm^3

In conclusion, the density of lead is 11.30 g/cm^3

Read more about density

https://brainly.com/question/15164682

#SPJ1

CQ

A block of lead has dimensions of 4.50 cm by 5.20 cm by 6.00 cm. The block weighs 1587 g. From this information, calculate the density of lead.

The volume of gas in the tank is determined as 1.78 L.

The volume of gas in the tank is calculated by applying idle gas law as follows;

PV = nRT

where;

n = reacting mass / molar mass

n = (300 g) / (3 x 16 g)

n = (300 g) / (48 g/mol)

n = 6.25 moles

The volume of the gas is calculated as follows;

V = nRT/P

V = (6.25 x 8.314 x 214.25)/(6250)

V = 1.78 L

Thus, the volume of ideal gas increases with increase in temperature.

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

From the given table of ionic compounds:

Formula of compound: FeSO₄ (aq)

Cation formula : Fe²⁺

Number of moles of cation : 1

Anion formula : SO₄²⁻

Number of moles of anion: 1

Formula of compound: (NH₄)₂SO₄ (aq)

Cation formula : NH₄⁺

Number of moles of cation : 2

Anion formula : SO₄²⁻

Number of moles of anion: 1

Formula of compound: Pb(NO₃)₂ (aq)

Cation formula : Pb²⁺

Number of moles of cation : 1

Anion formula : NO₃⁻

Number of moles of anion: 2

Formula of compound: K₃PO₄ (aq)

Cation formula : K⁺

Number of moles of cation : 3

Anion formula : PO³⁻

Number of moles of anion: 1

Formula of compound: Fe₂(SO₄)₃ (aq)

Cation formula : Fe³⁺

Number of moles of cation : 2

Anion formula : SO₄²⁻

Number of moles of anion: 3

Ions are atoms or groups of atoms that possess an electric charge.

Cations are positively charged ions.

Cations are formed as a result of the loss of electrons.

Metallic elements usually form cations.

Anions are negatively charged ions that are formed as a result of electron gain.

Non-metals usually form anions.

Compounds that are composed of oppositely charged ions are known as ionic compounds.

When ionic composed are dissolved in water or in molten form, the ions are free to move.

The separation of the ions in ionic compounds is known as dissociation.

Learn more about ionic compounds at: https://brainly.com/question/2687188

#SPJ1

The equipment which can be used to remove a harmful gas from an exhaust stream is known as wet scrubber.

The correct answer choice is option a

This simply refers to an equipment which is use to harmful gas, liquid or solid substance from an exhaust stream.

When a substance is harmful, it means it can affect living things in different forms. A harmful or toxic gas is very dangerous to our health system. When an exhaust stream contains any toxic substances, the wet scrubbers can be used to remove it

So therefore, wet scrubbers or venti scrubbers can be used to remove harmful gas from an exhaust stream.

Complete question:

What piece of equipment can be used to remove a harmful gas from an exhaust stream?

a. Wet scrubber

b. Liquid dissolver

c. Absorption column

d. Solvent mixer

e. Heat exchanger.

Learn more about equipment:

https://brainly.com/question/9450571

#SPJ1

The ingredients that is important in making plastics is natural gas plant liquids.

Natural gas liquids (NGLs) are components of natural gas which are separated from the gas state in the form of liquids. They many applications including; plastic production, inputs for petrochemical plants, they are also burned for space heat and cooking, and can also be blended into vehicle fuel.

In the manufacturing of plastics, come components of NGLs are used. And for this case, ethane. Ethane is used in the production of ethylene which are passed through pressure and catalyst to be turned to plastics like polythene.

The reason why they are mostly used in the manufacturing plastics than other resources like crude oil is that it is much cleaner.

Learn more about natural gas liquids here:

https://brainly.com/question/20415322

#SPJ4

Error Percent = (80.6 - 80.4)/ 80.6 X 100 (Option a is correct)

To learn more about : Absolute error

Ref : https://brainly.com/question/24957070

#SPJ13

When the use of significant figures and rounding up is applied correctly the mass of the mixture will be 80.5 g.

In cases of addition or subtraction, only the last significant figure of every number is taken into account.

In 30.05, this is 5, in the hundredths. When we look at 50.0, the last significant figure is 0, and it is in the tenths. And in 0.4006, the last significant figure is 6, in the ten thousandths. Of these three, the 0 from 50.0 is in the leftmost position, which means that the last significant figure of the result needs to be in the same position (in the tenths).

Moving onto the actual algebraic operation:

30.05 g + 50.0 g + 0.4006 = 80.4506 g

As we established, the last significant figure should be in the tenths, and we will have to round up 4 to 5 (trailing numbers are greater than 0), which means that the resulting mass will be 80.5 g.

You can learn more about significant figures here:

brainly.com/question/14804345

#SPJ4

Non-volatile mixtures can be separated using a process called thin layer chromatography (TLC). Since acetaminophen has a hydroxyl group, it is more polar than phenacetin.

Since acetaminophen has a hydroxyl group, it is more polar than phenacetin. Phenacetin will be more soluble and migrate to the top than the polar component because we are employing a non-polar solvent.

Non-volatile mixtures can be separated using a process called thin layer chromatography. The experiment is carried out on a piece of glass, plastic, or aluminum foil that has been lightly covered with an adsorbent substance. Typically, silica gel, cellulose, or aluminum oxide are utilized as the substance.

Because acetaminophen is more polar than phenacetin and nonpolar molecules pass through silica gel more quickly than polar ones do, acetaminophen would have a lower Rf value.

To learn more about TLC separation refer to:

https://brainly.com/question/24031676

#SPJ9

In chemistry, the expression radicals is used to denote highly reactive substances that may contain unpaired electrons.

The expression chemistry radicals indicate the presence of substance that are unstable because they have unpaired electrons that tends to form bonds with other substances. For example, the chlorine molecule may suffer homolysis under UV light and thus generate two radicals of Cl with unpaired electrons.

Therefore, we can conclude that the chemistry radicals are highly unstable molecules that are characterized to have unpaired electrons and therefore are prone to form chemical bonds with other substances.

Learn more about the chemistry radicals here:

https://brainly.com/question/28269136

#SPJ1

The volume of a pond being studied for the effects of acid rain that is 35 kiloliters (kL) if converted in microliters is found to be 3.5 x [tex]10^{10}[/tex]

Acid rain is the actual form of precipitation that includes acidic components like nitric or sulfuric acid that fall from the atmosphere on the earth's surface.

Acid rain refers to rain or any other type of precipitation that is unusually acidic, that is, contains large amounts of hydrogen ions.

The acid rains are considered harmful as they corrode and destroy these infrastructures, and plants and cause irritation to the organisms.

The volume of a pond that is being studied for the effects of acid rain is 35 kiloliters (kL).

There are a total of 1,000 liters (L) in 1 kL and 1 x [tex]10^6\\[/tex] microliters (mL) in 1 L.

Then 35 kL (1,000 L/ 1kL) (1 x 10^6 microliters / 1 L) = 3.5 x [tex]10^{10}[/tex] microliters

The volume of this pond calculated in microliters is 3.5 x [tex]10^{10}[/tex] microliters.

To know more about acid rain, visit:

https://brainly.com/question/22143130

#SPJ9

Answer:The path of a rock that begins in magma and ends in sedimentary rocks is called the rock cycle.

Explanation:Did this a while ago.Hope i helped :)