5) 5.2 mol of Xe is at 350 °C in a vessel of 5:00 L. For Xe, a-
4.250 atmL/mol and b- 5.105 x 10 L/mol. Calculate the
pressure assuming the Xe behaves:
a. Ideally.
b. As a real gas.

Positively charged sodium ions (Na+) and negative ion ions (Cl ) combine to generate sodium chloride (NaCl). Chemical bond is the form of bonding that exists between these ions.

As an electrolyte particularly, sodium chloride is used to assist reduce heat cramps brought on by excessive perspiration. The production of a typical isotonic solution of sodium chloride also uses this medication. There is no need for a license to get this medication.

To replace salt and water that have lost from your body as a result of certain conditions, sodium chloride 23.4% injection is employed (eg, hyponatremia or low salt syndrome). Furthermore, it is added to IV fluids that contain carbohydrates and parenteral nutrition total (TPN).

To know more about sodium chloride visit:

https://brainly.com/question/9811771

#SPJ1

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation can be written as

H[tex]_2[/tex]O[tex]_2[/tex] + 2KI  [tex]\rightarrow[/tex]  I[tex]_2[/tex] + 2KOH

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas. The balanced equation for the given reaction can be given as

H[tex]_2[/tex]O[tex]_2[/tex] + 2KI  [tex]\rightarrow[/tex]  I[tex]_2[/tex] + 2KOH

Therefore, the balanced equation can be written as

H[tex]_2[/tex]O[tex]_2[/tex] + 2KI  [tex]\rightarrow[/tex]  I[tex]_2[/tex] + 2KOH

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ1

False , For the most of exercisers, supplementing an appropriate diet with extra protein or amino blends will not promote muscle growth.

The basic amino group (NH2), an acetoxy group (COOH), as well as an organic Aromatic rings (or carbonyl group) that really is specific to each amino acid make up an amino acid, an organic molecule. Alpha-amino [alpha-amino] carboxylic acid is referred to as an amino acid informally.

Due to their comprehensive amino acid profiles, milk and eggs are excellent for those looking to increase lean muscle mass and strength, reduce body fat, or hasten their rate of training recovery. Lysine, histidine, hcl, valine,

Toknow more about amino acids visit :

https://brainly.com/question/13266141

#SPJ4

The symbol or formula:
a)  ammonium ion = [NH₄] ⁺

B) chromate ion = [CrO₄] ⁻²

c) tin (II) =Sn ⁺²

d) nitrate ion = [ NO₃] ⁻¹

How to represent the ions?

Ions are atoms or molecules that have a net electric charge due to the loss or gain of electrons. They can be represented by either a dot notation or a Lewis structure. In the dot notation, the number of valence electrons around the atom is indicated with dots located around the symbol representing the element. If the atom has a negative charge, a superscript minus sign is placed next to the element symbol. If the atom has a positive charge, a superscript plus sign is placed next to the symbol. In the Lewis structure, a line is used to represent an electron pair and a pair of dots is used to represent a single electron. The element symbol is placed in the center and the surrounding electrons are drawn in the shape of a circle around it.

For more information about ions please please visit:
https://brainly.com/question/1310794
#SPJ4

There is variation in the masses of 1.0-mole samples of different substances.

To have enough of the particles for chemists to work with in the lab, a lot (6.02 1023) of them are needed. A mole of the any particle will not weigh or have the same mass as a mole of another particle, just as a dozen donuts, flowers, and eggs did not have the same mass or weight.

Additionally, molar mass provides the mass of the a mole of a specific substance, which is the primary distinction between the two. Molecular weight, on the other hand, refers to a substance's molecule's mass. Although the terms "molar mass" and "molar mass units" are not the same

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ1

When carboxylic acids deprotonate, a sulfonic anion only with general formula R-COO- is produced. This anion may be used to create a number of beneficial salts, including soaps.

In the creation of polymers, bioplastics, coatings, adhesives, and medicinal medicines, carboxylic acids and their equivalents are employed. They can also be utilized as flavorings, food additives, solvents, and antimicrobials.

The screening evaluation resulted in the conclusion that none of four chemicals with in carboxylic acid group are hazardous to either the environment or human health at the present exposure levels.

To know more about carboxylic visit:

https://brainly.com/question/28203011

#SPJ4

The pH of the given solution is 11.98. Thus the concentration of H+ ions is 1.0 × 10⁻¹² M.

pH of a solution is the negative logarithm of its H+ ions concentration. Similarly pOH is the negative logarithm of its OH- ion concentration. The sum of pH and pOH of an aqueous solution is always 14.

Given that [OH-] = 9.7 × 10⁻³ M

pOH = - log (9.7 × 10⁻³ M) = 2.01.

pH = 14 - POH = 14 -2.01 = 11.98.

From the pH value, the H+ concentration can be calculated as follows:

pH = -log [H+]

[H+] = antilog (-pH)

       = 1.04 × 10⁻¹² M

Therefore, the H+ ion concentration of the solution is 1.04 × 10⁻¹² M.

To find more on pH, refer here:

https://brainly.com/question/491373

#SPJ1

From the Herszsprung -Russel Diagram presented it is to be noted that if a star has an absolute magnitude of 10 and a temperature of 20,000 K, the spectral class under which the star would be classified is; O-Types. (Option B).

These stars have a blue-white appearance and are characterized by strong emission lines in their spectra, which are caused by the high temperatures in their atmospheres.

The absolute magnitude of a star is not directly related to its spectral class, but it can be used to estimate the distance of a star from Earth. A star with an absolute magnitude of 10 would be relatively faint if it were close to Earth, but it could be much brighter if it were farther away.

Hence, if a star has an absolute magnitude of 10 and a temperature of 20,000 K, it would be classified as an O-type star.

Learn more about O-type Stars:
https://brainly.com/question/10429151
#SPJ1

Using the elements' positions on the periodic table is a general tool to predict probable bond type.  The exact prediction of bond type can be made using electronegativity values.

The bond between S and F is polar covalent. The electronegativity of S is 2.58 while the electronegativity of F is 3.98. The electronegativity difference between the two atoms is 1.40. When the electronegativity difference is between 0.5 to 1.6, we can say that, the bond formed between the two atoms as polar covalent.

Cl and Cl. A non-polar covalent bond , where the two atoms sharing electrons have very similar electronegativities so that the electrons are equally shared.

Learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ4

The mass of the materials used in making sparklers is determined by the mole ratio of the reactants in the chemical reactions that occur.

Sparklers are a kind of fireworks that do not explode but rather sparkle when they are lit.

The materials used in sparklers include materials such as:

Fuels such as iron, (Fe), aluminum (Al), or magnesium (Mg).

Oxidizers such as potassium nitrate( KNO₃) and potassium chlorate (KCLO₃).

Colorants that imbue color to the sparklers.

The reaction that occurs in sparklers is a chemical reaction. In sparklers, magnesium, aluminum, and iron each react with oxygen gas. The heat released from the reactions of the metal with oxygen causes the decomposition of the oxidizers such as potassium chlorate to potassium chloride and oxygen gas which is then used for further oxidation of the metals.

Learn more about sparklers at: https://brainly.com/question/10771844

#SPJ1

The only-step valorization of natural gas stays a task. Methane conversion to methanol thru chemical looping over copper-containing zeolites is a promising route, and CuMFI is most of the earliest efficaciously implemented.

But, the structure of the lively web sites in CuMFI, in addition to the effect of copper loading and Si/Al ratio on the copper speciation, are but to be understood. We observed that for CuMFI, the Cu/Al ratio determines the selectivity of methane conversion by way of governing the shape of the lively dicopper sites. At a Cu/Al ratio beneath 0.3, copper-containing MFI substances host dimeric centers with a Cu–Cu separation of two.nine Å and a UV/vis absorption band at 27 two hundred cm–1 able to selective oxidation of methane to methanol in a wide temperature range (450–550 k). A higher Cu/Al ratio results in the formation of mono-μ-oxo dicopper sites with Cu–Cu = three.2 Å, which exhibit a feature band at 21 900 cm–1 and react with methane at lower temperatures (<450 k), yielding overoxidation products. identifying differences in the structure of selective and nonselective copper sites will aid inside the layout of higher-performing substances.

To know more about methane click here

https://brainly.com/question/28723437

#SPJ4

The maximum wavelength of light needed to break the amide bond is 268 nm



First' permit's calculate the average bond power:
(276 + 615)/2 = 445.5 kJ/mol

with the aid of Avogadro's no 1 mol = 6.02x10²³ molecule, then the electricity important to break the amide bond in 1 molecule is:

E = 445.5/6.02x10²³ = 7.4x10⁻²² kJ = 7.4x10⁻¹⁹ J

So, the wavelength of light (λ) can be calculated by means of:

E= h*c/λ

wherein h is the Planck's constant ent (6.626x10⁻³⁴ J.s), and c is the mild velocity (three.0x10⁸ m/s).

7.4x10⁻¹⁹ = 6.626x10⁻³⁴ * three.0x10⁸/λ

λ = 2.68x10⁻⁷ m

λ = 268 nm

To know more about  wavelength click here
https://brainly.com/question/10750459

#SPJ4

The entropy increases because the system becomes more disorderly.

What is thermodynamic process?

Hence, The entropy increases because the system becomes more disorderly.

To learn more about thermodynamics click on the link

https://brainly.com/question/13059309

#SPJ4

The electron pairs in (C.)Ccl4 are arranged in a tetrahedral pattern around the carbon, necessitating sp3 hybridization. The four bonds between carbon and chlorine are formed by four sp3 hybrid orbitals.

One's' orbital and three 'p' orbitals of equal energy are mixed in this process to create a new hybrid orbital known as sp3. Tetrahedral symmetry and a combination of s and p orbitals are preserved at 109.280. Ethane is an example of sp3 hybridization (C2H6).

The hybridization theory was created by chemist Linus Pauling in 1931 to use atomic orbitals to describe the structure of basic molecules like methane (CH4).

Learn more about orbitals here:

https://brainly.com/question/18914648

#SPJ4

True. The amount of carbon-14 remains constant in equilibrium and is produced in the upper atmosphere.

Carbon-14 is a long-lived radioactive carbon isotope formed by the collision of neutrons and nitrogen atoms in the atmosphere when cosmic radiation occurs.

Organisms during their lifetime will absorb carbon-14, carbon-14 is a carbon that easily bonds with other atoms to help process reactions in the body. As in plants, carbon-14 acts as carbon dioxide, which is the raw material for photosynthesis. Carbon-14 is also decaying and the amount will be replaced when living things breathe and eat. The process of absorption of carbon-14 in living things will stop when these living things die, and the amount of carbon-14 in their bodies will decrease.

Learn more about cosmic radiation at:

https://brainly.com/question/1310278?

#SPJ4

The given unit conversions for the mass and length are as follows:

a. 0.765 g = 0.000765 kg

b. 1.34 g = 1340

c. 34.2 mg = 0.0342 g

d. 23 745 kg = 2.3745 * 10⁹ mg

2. a. 17.3 m = 17300 cm

b. 2.56 m = 0.00256 km

c. 567 dm = 56.7 m

d. 5.13 m = 5130 m

3. The shortest length is 0.0128 km and the longest length is 1583 cm

The mass of an object is the amount of matter present in the substance.

The mass of objects is measured using a chemical balance, the unit of measurement is kilograms.

The various units can be interconverted.

To convert each of the following masses to the units requested, the conversion factor is used;

a. 0.765 g to kilograms

0.765 g = 0.765/ 1000

0.765 g = 0.000765 kg

b. 1.34 g to milligrams

1.34 g = 1.34 * 1000

1.34 g = 1340

c. 34.2 mg to grams

34.2 mg = 34.2 / 1000

34.2 mg = 0.0342 g

d. 23 745 kg to milligrams

23 745 kg = 23 745 * 10⁶

23 745 kg = 2.3745 * 10⁹ mg

2. To convert each of the following lengths to the units requested, the steps are as follows:

a. 17.3 m to centimeters

17.3 * 100 cm

17.3 m = 17300 cm

b. 2.56 m to kilometers

2.56 m = 2.56/ 1000

2.56 m = 0.00256 km

c. 567 dm to meters

567 dm = 567 / 10

567 dm = 56.7 m

d. 5.13 m to millimeters

5.13 m = 5.13 * 1000

5.13 m = 5130 m

3. Converting the following lengths to meters:

1583 cm = 15.83 m

0.0128 km = 12.8 m

17 931 mm = 17.931 m

14 m

The shortest length is 0.0128 km and the longest length is 1583 cm

Learn more about length and mass at: https://brainly.com/question/18270472

#SPJ1

Adding CO to the reaction would result in formation of more products at equilibrium.

Chemical equilibrium, the state in which there is no net change in the amounts of reactants and products in the course of a reversible chemical reaction. A reversible chemical reaction is one in which products that is once formed react to form the original reactants. The types of balances are:

As additional reactants are added, the equilibrium shifts in order to produce more product. Adding more reactants shifts the equilibrium towards the products. Therefore the equilibrium shifts to the right.

To know more about chemical equilibrium, click-

https://brainly.com/question/6705807

#SPJ1

The complete question is follows:

1. The mass fraction of sodium carbonate in solution A and solution B are  0.05 and 0.15 respectively.

2. The mass fraction of sodium sulfate is 0.696

3. The equations of the interaction between the strontium chloride and the given solutions are:

The mass of sodium carbonate that will release 5.82 L and 4.70 L of carbon dioxide gas when reacted with sulfuric acid is determined from the equation of reaction below:

Na₂CO₃ + H₂SO₄ ---> Na₂SO₄ + H₂O + CO₂

1 mole or 106 g of Na₂CO₃ produces 1 mole or 22.4 L of CO₂

5.82 L of CO₂ will be produced by 5.82/22.4 * 106 g = 27.54 g

4.70 L of CO₂ will be produced by 4.70/22.4 * 106 g = 22.24 g

The mass fractions are calculated as follows:

Let the mass fraction of sodium carbonate in solution A and solution B be x and y respectively

x * 100 g + y * 150 = 27.54 g

100x + 150 y = 27.54 g --- (1)

x + 1.5 y = 0.2754

x * 150 + y * 100 = 22.24 g

150x + 100y = 22.24 ---- (2)

1.5x + y = 0.2224

solving for y in Eqn 1;

x = 0.2754 - 1.5y --- (3)

substitute (3) in (2)

1.5(0.2754 - 1.5y) + y = 0.2224

0.4131 - 2.25y + y = 0.2224

-1.25y = -0.1907

y = 0.15

x = 0.2754 - 1.50 * 0.15

x = 0.05

2. The molarity of 20% (W/W) solution of sulphuric acid is 2.55 M.

From the equation of the reaction, 1 mole sulfuric acid solution reacts with 1 mole sodium carbonate solution to form 1 mole sodium sulfate

Molar mass of sodium sulfate = 142 g/mol

Molar mass of H₂O = 18 g/mol

Molar mass of CO₂ = 44 g/mol

Total mass = 204 g

Mass fraction of sodium sulfate = 142/204

Mass fraction of sodium sulfate = 0.696

3. The equation of the interaction between the strontium chloride solution and the original solution of sodium carbonate is:

SrCl₂ + Na₂CO₃ ----> 2 NaCl (aq) + SrCO₃

The equation of the interaction between the strontium chloride solution and the solution obtained in the reaction between sodium carbonate and sulfuric acid is:

SrCl₂ + Na₂SO₄ ---> SrSO₄ + NaCl

Learn more about mass fraction at: https://brainly.com/question/21430000

#SPJ1

Question 1

The formula mass of methanol is [tex]12.0+3(1.01)+16.0+1.01=32.04[/tex] g/mol.

Therefore, in 5.0 grams of methanol, there are [tex]5.0/32.04=\boxed{0.16}[/tex] moles.

Question 2

The formula mass of copper(II) carbonate is [tex]63.5+12.0+3(16.0)=123.5[/tex] g/mol.

This means that in 9.0 grams of copper(II) carbonate, there are [tex]9.0/123.5=0.072874493927126[/tex] moles.

Using Avogradro's number, there are [tex](0.072874493927126)(6.022 \times 10^{23})=\boxed{4.4 \times 10^{22}}[/tex] molecules.

Question 3

The formula mass of cyclohexane is [tex]12.0(6)+1.01(12)=84.12[/tex] g/mol.

So, 3.0 grams of cyclohexane is the same as [tex]3.0/84.12=\boxed{0.036}[/tex] moles.

Question 4

The formula mass of benzene is [tex]12.0(6)+1.01(6)=78.06[/tex] g/mol.

This means that 4.00 moles of benzene has a mass of [tex](78.06)(4.00)=\boxed{312}[/tex] grams.

Question 5

1000 atoms of calcium is the same as [tex]\frac{1.000}{6.022 \times 10^{23}}[/tex] moles.

This is equal to [tex]\frac{1000}{6.022 \times 10^{23}} \cdot 40.078=\boxed{6.7 \times 10^{-20}}[/tex] grams.

Lowest Energy: Lithium, Sodium, Strontium, Potassium, Copper, Calcium.
Highest Energy: Barium.

Energy is the capacity to cause change. It is the ability of a system to do work, and can take a variety of forms, such as kinetic, potential, electrical, chemical, thermal, and nuclear. Energy can be transformed from one form to another, but the total amount of energy in the universe is constant. Energy powers all living organisms, and is the driving force behind physical and chemical changes. Examples of energy transformations include light energy converted to heat energy, and chemical energy in food converted to mechanical energy in muscles. Through the use of renewable sources of energy, such as solar, wind and water, humans are able to use energy sustainably and reduce their impact on the environment.

To learn more about Energy
https://brainly.com/question/19666326
#SPJ1

Acetylcholine is released from the vesicles and into the synaptic cleft upon stimulation of the presynaptic terminal, where it is free to connect with receptors.

The central nervous system's output neurons are known as motor neurons (MNs). Muscle contraction is a direct result of their activity. At the neuromuscular junction, MNs release acetylcholine (ACh), which was widely acknowledged by the 1940s.

Acetylcholine (ACh) is an organic chemical that serves as a neurotransmitter in the bodies and brains of numerous animal species, including humans. It is an ester of acetic acid and choline, which is how its name was derived from its chemical composition.

To know more about Acetylcholine visit:-

https://brainly.com/question/19581612

#SPJ4

Answer:

Explanation:

Color is caused by the way light bounces off of objects. Certain objects only reflect certain frequencies of light, which is what makes up color. For example, when the sun shines on earth (which, the sun shines white light, which is made of all colors), lets say it reflects off of an apple tree in a field. The tree's leaves will reflect green light because of the chloraphyll inside its cells. However, if the light reflects off of one of the apples on the tree, red light is seen because of the nutrients inside of the skin of the apple. In art, color is very important, so people have found ways to use paint (which is in all colors) to essentially mimic the effect that light has on the real world.

hope this helps!!! :3

False, Acetylene is extremely flammable when under pressure and ignites spontaneously in air when pressures are more than 15 psi. Since acetylene cylinders are devoid of oxygen, they pose a risk of asphyxiation when released.

The acetylene equipment's working pressure is crucial: A maximum acetylene pressure of 0.62 bar (9 psi) is permitted only with specially constructed equipment.

Even though acetylene is hotter, it emits less heat. The most common preheating method uses oxygen and propane. This is true. Propane has more heat that is readily available.

Learn more about asphyxiation on:

https://brainly.com/question/11588438

#SPJ4

Answer:

Explanation:

O Potassium and Bromine are in the same period.

The periodic table is a chart of all the known elements arranged according to their atomic structure. Elements in the same period are in the same row of the periodic table and have similar chemical properties because they have the same number of electron shells.

O Nitrogen and Bismuth are not in the same period. Nitrogen is in period 2 and bismuth is in period 6.

O Silver and Calcium are not in the same period. Silver is in period 5 and calcium is in period 4.

O Fluorine and Chlorine are in the same period. They are both in period 2.

Measurement of temperature by Chemist involving Mean and SD:

The distribution of F is (a) F = N(104, 3.24).

A  mean is calculated by dividing the total number of values by the sum of all the values. The term "average" is frequently used to describe this measure of central tendency.

In statistics, the measurement of variability known as the standard deviation (SD) is frequently utilized. It demonstrates how different things are from the norm (mean). While a high SD shows that the data are dispersed throughout a wide range of values, a low SD suggests that the data points tend to be close to the mean.

As,E[ax+b]=aE(x)+b

Var(ax+b)=a∧2(Var(x))

Now, F=1.8C+32

E(F)=1.8×E(C)+32=1.8×40+32

E(F)=104

Var(F)=1.82×1=3.24

std_dev(F)=√(3.24)=1.8

So, F ≈ N(104,3.24).

Measurement of temperature by Chemist involving Mean and SD:

The distribution of F is (a) F = N(104, 3.24).

To refer more about Standard deviation visit:

https://brainly.com/question/475676

#SPJ4

A stock solution can best be described as a concentrated solution of known exact concentration that is diluted for future use in the laboratory. You can choose not to prepare a stock solution, but doing so can streamline your operations while saving significant time and resources in the process.

A 10X stock solution contains 10-fold concentrations of all solutes compared to the working solution, which is considered a 1X solution. Therefore, the 10x solution should be diluted 10x to get the final working solution.

C₁V₁ = C₂V₂

Where,

C₁ = 10 X

C₂ = 1 X

V₁ = Amount of TAE stock solution

V₂ = 30.0 mL

Now, substitute the values:

10 V₁ = 1 × 30.0V₁ = 30/10

V₁ = 3 ml

Hence, for a 30 ml 1 X solution; 3 ml of 10 X TAE solution and 27 ml of deionized water are mixed.

To know more about stock solutions, visit:

https://brainly.com/question/13263639

#SPJ1

"The goal of this study is to compare the grades of students who attend office hours and those who do not," is an example of a qualitative research question.

In order to examine or characterize occurrences rather than offer a clean nomothetic explanation, qualitative research questions are frequently more wide and imprecisely phrased. Although many of them do, they may just include one concept. Example: ''What is it like to grow up in a rural setting with only one parent?''

Typically, a study's or an industry report's quantitative research questions serve as the introduction. It is crucial that the research questions employed in quantitative business research enable respondents to provide clear responses. Example: ''How many texts do you send per day?''

To know more about business research please click here https://brainly.com/question/20365163

#SPJ1

The first undiscovered remedy is barium chloride.

Option b is correct.

Explanation and Response: The flame of potassium, often known as a lilac flame, is violet or light purple in color. Remember that different elements can create similar colors, thus flame tests are not always reliable.

Avoid contact with mucous membranes, eyes, and skin as copper(II) chloride is mildly poisonous. Body tissue irritant lithium chloride is used. In order to prevent trashcan fires, rinse the wooden splints before throwing them in the trash. Put on chemical-resistant gloves, an apron, splash goggles, and other protective gear.

To know more about chemicals visit:-

https://brainly.com/question/13145357

#SPJ4

The heat energy required to change 100g of ice at -25°C to water at 75°C is 45.36KJ

Specific latent heat if fusion of a substance is the quantity of heat required to covert unit mass of the substance at melting point to its liquid form without change in temperature. The specific latent heat of fusion of ice is 336000J/kg. The heat required is given as H= ml

Specific heat capacity of a substance is the heat required to raise the temperature of a unit mass substance by 1°C. The specific heat capacity of water is 4200J/kg/°C

Therefore the ice will change to water and it's temperature will now increase. This means that the heat required to change ice if -25°C to water of 75°c is H = ml + mc∆T

H = (0.1×33600)+0.1×4200×75-(-25)

H= 3360+42000

H= 45360J = 45.36KJ

learn more about specific latent heat of fusion from

https://brainly.com/question/10763306

#SPJ1