40.0 pj of energy is stored in a 3.00 cm × 3.00 cm × 3.00 cm region of uniform electric field. what is the electric field strength?

The heat required to raise the temperature of 5kg of water from 5°C to 35°C is 150 kcal.

To calculate the heat required to raise the temperature of 5kg of water from 5°C to 35°C in kcal, you can use the following terms and formula:
- Mass (m) = 5kg
- Initial temperature (T1) = 5°C
- Final temperature (T2) = 35°C
- Specific heat capacity of water (c) = 1 kcal/kg°C
- Heat (Q) = ?

The formula to calculate heat is:

Q = mc(T2 - T1)

Substitute the given values into the formula.
Q = (5kg) * (1 kcal/kg°C) * (35°C - 5°C)

Perform the calculations inside the parentheses.
Q = (5kg) * (1 kcal/kg°C) * (30°C)

Multiply the values together.
Q = 150 kcal

Learn more about heat:

https://brainly.com/question/934320

#SPJ11

Okay, let's break this down step-by-step:

* The mass of the person is 105 kg

* The mass of the Earth is 5.97 x 10^24 kg

* The gravitational force acting on the person is 1030 N

To calculate the distance (r) between the person and the center of Earth, we use the gravitational force equation:

F = G*m1*m2/r^2

Where:

F = 1030 N (the force given)

G = 6.67 x 10^-11 N*m^2/kg^2 (universal gravitational constant)

m1 = 105 kg (mass of person)

m2 = 5.97 x 10^24 kg (mass of Earth)

So plugging in the values:

1030 = G * (105 kg) * (5.97 x 10^24 kg) / r^2

Solving for r:

r = 6.371 x 10^6 m

Rounding to 3 significant figures:

r = 6.371 x 10^6 m

So the distance between the person and the center of Earth is approximately 6.371 million meters.

Let me know if you have any other questions!

Therefore, the magnitude of the flux through the given surface produced by the magnetic field is 0.1907 [tex]cm^2 * T.[/tex]

To find the magnetic flux through the given surface, we need to integrate the dot product of the magnetic field and the surface area vector over the surface.

The surface area vector is given by a unit vector in the z-direction, i.e., A = A_z = k^.

Thus, the magnetic flux through the surface is given by the surface integral:

Φ = ∫∫ B · dA

We can evaluate this integral using the divergence theorem:

Φ = ∫∫∫ (∇ · B) dV

the volume integral is taken over the region enclosed by the surface.

Since the magnetic field is given as a function of time, we need to evaluate the divergence of the field at each time:

∇ · B = (∂B_x/∂x) + (∂B_y/∂y) + (∂B_z/∂z)

= 0 + 0 + (∂B_z/∂z)

= -1.35

Substituting this into the volume integral and evaluating it over the region enclosed by the surface, we get:

Φ = -1.35 (3.75)

= -0.1907

However, since the magnetic flux is a scalar quantity, we need to take its magnitude:

|Φ| = 0.1907.

Learn more about magnitude visit: brainly.com/question/30337362

#SPJ4

The correct answer is: That energy is Fr/2. When an object is twirled at a constant speed in a horizontal circle, it experiences a centripetal force that pulls it towards the center of the circle.

This force is provided by the tension in the string or rope that is used to twirl the object. The tension in the string is always perpendicular to the direction of motion, so it does no work on the object. Therefore, the only energy that is being transferred to the object is kinetic energy.
The formula for kinetic energy is [tex]1/2mv^2[/tex], where m is the mass of the object and v is its velocity.

In this case, we can use the formula for centripetal force, which is [tex]Fc = mv^2/r[/tex], where r is the radius of the circle.

We can rearrange this formula to solve for v: [tex]v = \sqrt{(Fc*r/m)}[/tex].
Now, we can substitute this expression for v into the formula for kinetic energy:

KE = 1/2m(√(Fc*r/m))^2.

Simplifying this expression, we get KE = 1/2mFc*r.
Since the only force acting on the object is the tension in the string, we can substitute Fc = F into this expression. Therefore, the kinetic energy of the object is KE = Fr/2.

To learn more about kinetic energy click here https://brainly.com/question/26472013

#SPJ11

a) Mass of single N₂ molecule = 4.65 x 10⁻²³ g

b) translational kinetic energy = 6.06 x 10⁻²¹ J

c) number of N₂ molecules = 1.638 x 10²⁴ molecules

d) Total translational kinetic energy = 9.938 x 10³ J

(a) Mass of single N₂ molecule = molar mass/Avogadro's number

= 28.0/6.022 x 10²³ = 4.65 x 10⁻²³ g

(b) Temperature = 20 deg C = 293 K

Average kinetic energy per N₂ molecule = (3/2)kT  k is the Boltzmann constant

= (3/2) x 1.381 x 10⁻²³ x 293 = 6.06 x 10⁻²¹ J

(c) Diameter = 47.0 cm = 0.470 m

=> radius r = 0.470/2 = 0.2350 m

Volume of sphere V = (4/3)r3

= (4/3) x 3.1416 x (0.2350)³ = 0.0544 m³

Pressure P = 1.20 atm = 1.20 x 101325 = 1.215 x 10⁵ Pa

Using the ideal gas equation PV = nRT

Moles of N₂

n = PV/RT

= 1.215 x 10⁵ x 0.0545/(8.314 x 293) = 2.72 mol

Number of N₂  molecules = moles of N₂  x Avogadros' number

= 2.72 x 6.022 x 10²³ = 1.638 x 10²⁴ molecules

(d) Total kinetic energy = (3/2)nRT

= (3/2) x 2.72 x 8.314 x 293 = 9.938 x 10³ J

To know more about  kinetic energy  here:

https://brainly.com/question/15764612#

#SPJ11

a. The direction and magnitude of a particle with a charge of -1.24 × 10⁻⁸ c in 11.40 t2nd is force on the particle will be somewhere between zero and -1.41 × 10⁻⁷ N, and will be directed somewhere between the y-axis and the negative x-axis.

b. The direction and magnitude of a particle with a charge of -1.24 × 10⁻⁸ c in 11.40 t2k is the force on the particle will be somewhere between zero and -1.41 × 10⁻⁷ N, and will be directed somewhere between the y-axis and the negative z-axis.

For a particle with a charge of -1.24 × 10⁻⁸ c moving within a magnetic field, the direction and magnitude of the force it experiences can be calculated using the formula: F = qvBsinθ, where F is the force in Newtons, q is the charge of the particle in Coulombs, v is the velocity of the particle in meters per second, B is the strength of the magnetic field in Tesla, and θ is the angle between the velocity vector and the magnetic field vector.

(a) In this case, the particle is moving with a velocity of in-n, which I'm assuming means "in the negative direction of the x-axis." Let's assume the magnetic field is also in the x-direction. If the particle is moving directly towards the magnetic field (i.e. θ = 0), then sinθ = 0 and the force on the particle is zero. If the particle is moving perpendicular to the magnetic field (i.e. θ = 90 degrees), then sinθ = 1 and the force on the particle is given by

F = (-1.24 × 10⁻⁸ C) × (in-n) × (11.40 T) × (1)

= -1.41 × 10⁻⁷ N, directed in the negative y-direction. If the particle is moving at an angle between 0 and 90 degrees with respect to the magnetic field, then the force on the particle will be somewhere between zero and -1.41 × 10⁻⁷ N, and will be directed somewhere between the y-axis and the negative x-axis.

(b) In this case, the particle is moving with a velocity of in-k, which I'm assuming means "in the negative direction of the z-axis." Let's assume the magnetic field is also in the z-direction. If the particle is moving directly towards the magnetic field (i.e. θ = 0), then sinθ = 0 and the force on the particle is zero. If the particle is moving perpendicular to the magnetic field (i.e. θ = 90 degrees), then sinθ = 1 and the force on the particle is given by

F = (-1.24 × 10⁻⁸ C) × (in-k) × (11.40 T) × (1)

= -1.41 * 10⁻⁷ N, directed in the negative y-direction. If the particle is moving at an angle between 0 and 90 degrees with respect to the magnetic field, then the force on the particle will be somewhere between zero and -1.41 × 10⁻⁷ N, and will be directed somewhere between the y-axis and the negative z-axis.

Learn more about direction and magnitude: https://brainly.com/question/14229104

#SPJ11

The units of the momentum of the t-shirt are the units of the integral [tex]inegral^{t} = tL_{t} = 0[/tex] F(t) dt, where F(t) has units of N and t has units of S are kg × m/s² (Option D).

The units of momentum can be determined by analyzing the units of the integral in the equation provided. The integral has units of N × s (Newton-seconds) since F(t) has units of N (Newtons) and t has units of s (seconds).

Recall that 1 N is equivalent to 1 kg × m/s² (kilogram-meter per second squared). Therefore, we can rewrite the units of the integral as kg × m/s multiplied by s, resulting in kg × m/s.

Therefore, the unit of the momentum is kg × m/s².

Learn more about momentum: https://brainly.com/question/13767949

#SPJ11

Therefore, the pOH of a 0.467 M aniline solution is 4.75, and the pH is 9.25.

The base dissociation reaction for aniline is:

[tex]C_6H_5NH_2 + H_2O = C_6H_5NH_3+ + OH-[/tex]

The base dissociation constant (Kb) for aniline is given as 7.5 × 10^-10 at 25°C. We can use this value to calculate the concentration of hydroxide ions (OH-) in a 0.467 M solution of aniline:

Kb =[tex][C_6H_5NH_3+][OH-] / [C_6H_5NH_2][/tex]

Let x be the concentration of hydroxide ions produced by the dissociation of aniline. Then the concentration of the aniline molecule that dissociated to produce the hydroxide ions is (0.467 - x) M. Since aniline is a weak base, we can assume that x is much smaller than 0.467 and thus we can approximate 0.467 - x as 0.467.

Therefore, at equilibrium:

Kb = x^2 / 0.467

Solving for x, we get:

x = √(Kb × 0.467) = √(7.5 × 10^-10 × 0.467) = 1.76 × 10^-5 M

The concentration of hydroxide ions in the solution is 1.76 × 10^-5 M. To calculate the pOH, we can use the relation:

pOH = -log[OH-]

pOH = -log(1.76 × 10^-5) = 4.75

Finally, we can use the relation pH + pOH = 14 to calculate the pH of the solution:

pH = 14 - pOH = 14 - 4.75 = 9.25

Learn more about aniline visit: brainly.com/question/28724995

#SPJ4

The amplitude of the associated electric field is 3.75 x 10^5 V/m.

1. The frequency of the wave can be determined using the formula f = c/λ, where c is the speed of light in a vacuum (approximately 3.00 x 10^8 m/s) and λ is the wavelength. Converting the wavelength from nm to meters gives:

λ = 422 nm = 422 x 10^-9 m

f = c/λ = (3.00 x 10^8 m/s)/(422 x 10^-9 m) = 7.11 x 10^14 Hz

Therefore, the frequency of the wave is 7.11 x 10^14 Hz.

2. The amplitude of the associated electric field can be found using the relationship between the magnetic field amplitude (B) and the electric field amplitude (E) of a sinusoidal electromagnetic wave: B = E/c, where c is the speed of light in a vacuum. Rearranging this formula gives:

E = B x c

Plugging in the given values for B and c, we get:

E = (1.25 μt) x (3.00 x 10^8 m/s) = 3.75 x 10^5 V/m

Learn More about amplitude here :-

https://brainly.com/question/8662436

#SPJ11

Answer:

The correct option is (a): the reflected ray never intersects.

Explanation:

Within an H-II region, hydrogen atoms become ionized by absorbing ultraviolet radiation from a nearby star.

The high-energy photons from the star have enough energy to knock an electron off the hydrogen atom, leaving a positively charged hydrogen ion or proton.

This process is known as photoionization and is the main mechanism for ionizing hydrogen in H-II regions.

The ionized hydrogen then emits its own radiation, creating the characteristic red glow of H-II regions.

While hydrogen atoms can also become ionized by other means, such as absorbing thermal radiation or capturing free electrons, these processes are less common in H-II regions compared to photoionization by ultraviolet radiation from nearby stars.

learn more about radiation here:brainly.com/question/13934832

#SPJ11

To calculate the torque required to give the ladder an angular acceleration of 0.328 rad/s^2, we can use the formula:

Torque = moment of inertia x angular acceleration

Since the ladder is being treated as a uniform rod, we can use the formula for the moment of inertia of a rod rotating around its center:

I = (1/12) x M x L^2

Where:
M = mass of the rod
L = length of the rod

Plugging in the values given, we get:

I = (1/12) x 8.34 kg x (3.10 m)^2 = 0.814 kg.m^2

Now we can calculate the torque required:

Torque = 0.814 kg.m^2 x 0.328 rad/s^2 = 0.267 N.m

Therefore, the person holding the ladder horizontally at its center must exert a torque of 0.267 N.m to give it an angular acceleration of 0.328 rad/s^2.
 we can use the following equation:

Torque (τ) = Moment of Inertia (I) × Angular Acceleration (α)

First, let's find the moment of inertia for the ladder. Since it is a uniform rod, the moment of inertia can be calculated using the formula:

I = (1/12) × Mass (m) × Length^2 (L^2)

Plugging in the given values:

I = (1/12) × 8.34 kg × (3.10 m)^2
I ≈ 8.99 kg m^2

Now, we have the moment of inertia (I) and the given angular acceleration (α) of 0.328 rad/s². We can now calculate the torque:

τ = I × α
τ = 8.99 kg m² × 0.328 rad/s²
τ ≈ 2.95 N m

The person must exert a torque of approximately 2.95 N m on the ladder to give it the desired angular acceleration.

learn more about  torque here

brainly.com/question/20038416

#SPJ11

The given statements about the B-coordinate vector of an x in Rh, the correspondence  of [x]B Hx and a plane in R3 are true.

a. True. If B is the standard basis for [tex]R^n[/tex], then the B-coordinate vector of an x in [tex]R^n[/tex] is x itself. This is because the standard basis consists of vectors with a 1 in one entry and 0 in all other entries, so the coordinates of x with respect to the standard basis are the same as the coordinates of x in [tex]R^n[/tex].
b. True. The correspondence [x]B ↔ x is called the coordinate mapping. This mapping takes a vector x in the vector space V and represents it as a coordinate vector [x]B with respect to the basis B. This allows us to express the vector x in terms of the basis B.
c. True. In some cases, a plane in [tex]R^3[/tex] can be isomorphic to [tex]R^2[/tex]. A plane in [tex]R^3[/tex] can be considered as a vector space, and if we can find a bijection (a one-to-one and onto mapping) between the plane and [tex]R^2[/tex] that preserves vector addition and scalar multiplication, then the two vector spaces are isomorphic. This is possible when we have a basis of the plane consisting of two linearly independent vectors, which can be mapped to the standard basis of [tex]R^2[/tex].

To learn more about vector click here https://brainly.com/question/19554405

#SPJ11

Answer:

S = 1/2 a t^2      since intial speed is zero

Vav = 210 m/s / 2 = 105 m/s

t = .7 m / 105 m/s = 6.67E-3 sec    (6.67 * 10^-3 s)

a = 2 S / t^2

a = 2 * .7 / (6.67E-3)^2

a = 31,500 m/s^2

Check:

Ave Speed * time = length of barrel

105 * 6.67E-3 = .70 m

The exchange rate in one year will be  HUF 198.43.

To predict the exchange rate in one year, we can use the Purchasing Power Parity (PPP) theory. The formula is:

Future exchange rate = Spot exchange rate × [(1 + Inflation rate of country A) / (1 + Inflation rate of country B)]

In this case, the spot exchange rate for the Hungarian forint is HUF 204.34, the inflation rate in the United States is 1.6 percent per year, and it's 4.6 percent in Hungary. Plugging the values into the formula:

Future exchange rate = 204.34 × [(1 + 0.016) / (1 + 0.046)]
Future exchange rate = 204.34 × [(1.016) / (1.046)]
Future exchange rate = 204.34 × 0.97132
Future exchange rate ≈ HUF 198.43

So, based on the given information, we predict that the exchange rate in one year will be approximately HUF 198.43.

Know more about exchange rate here:

https://brainly.com/question/10187894

#SPJ11

According to Newton's third law, the smaller box is exerting a force of 30 N on the larger crate, hence the correct answer is (B) 30 N.

According to the first law, until a force strikes on an item, it will not alter its motion. According to the second law, an object's force is determined by multiplying its mass by its acceleration. According to the third law, when two objects interact, they exert equal-sized and opposite-direction pressures upon one another.

We can use Newton's second law of motion to write an equation for the acceleration of the two crates:

F_net = (m_1 + m_2) a

The net force on the two crates is the force exerted by the artist on the smaller crate:

F_net = 42 N

Substituting into the equation above and solving for a, we get:

a = F_net / (m_1 + m_2)

F_larger-on-smaller = m_2 a

We can substitute the expression for a we found earlier:

F_larger-on-smaller = m_2 (F_net / (m_1 + m_2))

m_1 = 3 kg (smaller crate)

m_2 = 5 kg (larger crate)

Substituting these values, we get:

F_larger-on-smaller = 5 kg (42 N) / (3 kg + 5 kg) = 30 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

When a current is passed through the hanging Slinky toy, it will compress.

1. The powerful battery is connected to the Slinky toy, and a switch is used to control the flow of current.
2. When the switch is closed, it allows current to flow through the Slinky.
3. The current generates a magnetic field around the Slinky due to the movement of electrons.
4. Since the Slinky is made of metal coils, each coil acts as a loop with its own magnetic field.
5. The magnetic fields of the adjacent coils interact, causing an attractive force between the coils.
6. This attractive force causes the Slinky to compress as the coils are pulled closer together.

So, when the switch is closed and the Slinky toy carries current, it compresses due to the attractive force between the coils created by the magnetic fields.

Learn more about the magnetic field:
https://brainly.com/question/14411049

#SPJ11

The value of S(f) for f = 0 is 1. The area under |S(f)| should also be equal to 1/8.

The value of S(f) for f = 0 can be found by substituting f = 0 in the Fourier transform of s(t), which gives:

S(0) = integral from -inf to inf of s(t) dt = 1

The value of S(f) for f = 0 is 1.

Since s(t) is a rectangular pulse with a width of 1/2, the total energy of the signal is equal to its amplitude squared multiplied by its duration, which is:

E = (1/2)² * 1/2 = 1/8

       |                       __________

       |                     _|

       |                  __|

       |                __|

       |             __|

       |          __|

       |       __|

       |    __|

       | __|

_______|_|_|_|_|_|_|_|_|_|_|_|_|____________

      -1   0   1  -2  -1   0   1   2   3

       f

The term "pulse" typically refers to a disturbance or wave that travels through a medium. A pulse can take many forms, such as a sound wave, a light wave, or a pressure wave. When a pulse is created, it causes a temporary disturbance in the medium, which then travels outward in all directions.

Pulses can be characterized by a number of different properties, including their amplitude (i.e., the height of the wave), their wavelength (i.e., the distance between successive peaks or troughs), and their frequency (i.e., the number of waves that pass a given point in a unit of time). Pulses can be used in a variety of applications, including telecommunications, medicine, and material testing. For example, in ultrasound imaging, a pulse of high-frequency sound waves is sent into the body, and the echoes that bounce back are used to create an image of the internal organs.

To learn more about Pulse visit here:

brainly.com/question/21918102

#SPJ4

To determine the theoretical expected maximum voltage across the capacitor, we need to consider the voltage supply and the capacitance value. The maximum voltage across a capacitor can be calculated using the formula Vmax = Q max/C, where Q max is the maximum charge that the capacitor can hold and C is the capacitance value.

Assuming that the voltage supply is constant and there is no resistance in the circuit, the theoretical expected maximum voltage across the capacitor can be calculated as follows:
Vmax = Q max/C
Where Q max = CV, where C is the capacitance value and V is the maximum voltage supply.

Therefore, the theoretical expected maximum voltage across the capacitor can be calculated as Vmax = (C x V)/C, which simplifies to Vmax = V.
In other words, the theoretical expected maximum voltage across the capacitor is equal to the maximum voltage supply.

To know more about  maximum voltage:

https://brainly.com/question/29586777

#SPJ11

If you drive your car with an average velocity of 65 miles/hour, it will take you approximately 7.69 hours (or 7 hours and 41 minutes) to make a trip of 500 miles.

To determine how long it will take you to make a trip of 500 miles with an average velocity of 65 miles/hour, you can use the formula:
Time = Distance / Velocity
In this case, the distance is 500 miles and the average velocity is 65 miles/hour.
Time = 500 miles / 65 miles/hour
Time ≈ 7.69 hours
It will take you approximately 7.69 hours to complete the 500-mile trip at an average velocity of 65 miles/hour.

To learn more about velocity click here https://brainly.com/question/17127206

#SPJ11

The angle of refraction in the water is approximately 51.7 degrees. To calculate the angle of refraction in the water, we can use Snell's Law, which states that the ratio of the sines of the angles of incidence and refraction  equivalent to the ratio of the refraction indices of the two mediums.

sin(theta1)/sin(theta2) = index of refraction of air/index of refraction of water

Plugging in the given values, we get:

sin(75.0°)/sin(theta2) = 1/1.33

Rearranging and solving for the refraction angle, we get:

sin(theta2) = sin(75.0°) × 1.33

sin(theta2) = 1.225

Taking the inverse sine both sides of equation, we get:

refraction angle = sin^-1(1.225)

refraction angle ≈ 51.7°

Therefore, the angle of refraction in the water is approximately 51.7 degrees.

To know more about Snell's Law visit:

https://brainly.com/question/2273464

#SPJ11

A particle of rest mass energy 20 MeV decays from rest into an electron, and assuming that all the lost mass is converted into the electron's kinetic energy, then we can use the conservation of energy principle to find the electron's kinetic energy.

The rest mass energy of the particle is 20 MeV, which means that its mass is equivalent to 20/0.511 = 39.14 MeV/c^2, where c is the speed of light.

When the particle decays, all its mass is converted into the electron's kinetic energy. Therefore, the kinetic energy of the electron is equal to the lost mass energy of the particle, which is 20 MeV.

So, the answer is that the electron's kinetic energy is 20 MeV.

Learn more about mass energy here:

https://brainly.com/question/27919071

#SPJ11

If you need to change a table's structure in ways that are beyond the capabilities of your DBMS, you may need to manually modify the table's schema or use third-party tools to assist in the process.

Manual modification of the schema may involve exporting the table's data, making the necessary changes to the table structure in a text editor or IDE, and then importing the data back into the modified table.

Third-party tools, such as database schema migration tools, can automate much of this process and simplify the task of modifying complex table structures.

These tools can help you to generate SQL scripts to modify the table schema, apply the changes to the database, and even manage versioning and rollback in case of errors.

However, it is important to test any schema changes thoroughly before applying them to a production database to avoid data loss or other issues.

To know more about database schema click on below link:

https://brainly.com/question/9957694#

#SPJ11

A ball is traveling at a constant speed of 8.5 m/s in a circle with a radius of 0.8 m;the centripetal acceleration of the ball is 90.3125 m/s²

To find the centripetal acceleration of a ball traveling at a constant speed of 8.5 m/s in a circle with a radius of 0.8 m, you can use the formula:
Centripetal acceleration (a_c) = (constant speed)² / radius
Step 1: Plug in the given values.
a_c = (8.5 m/s)² / 0.8 m
Step 2: Square the constant speed.
a_c = 72.25 m²/s² / 0.8 m
Step 3: Divide the squared speed by the radius.
a_c = 90.3125 m/s²
So, the centripetal acceleration of the ball is 90.3125 m/s²

To learn more about centripetal acceleration https://brainly.com/question/79801

#SPJ11

As a result, the acetic acid molarity in the provided vinegar sample is 0.729 M.

By dividing the mass of acetic acid by its molar mass, we may determine how many moles there are. The mass of the solution divided by the density gives the volume of the mixture. After that, determine the molarity directly. Intuitively, this outcome makes sense.

Volume of NaOH used = Final volume of buret - Initial volume of buret

Volume of NaOH used = 19.56 mL - 1.80 mL

Volume of NaOH used = 17.76 mL

The molarity of acetic acid, we can use the following formula:

Molarity of acetic acid = (Molarity of NaOH) x (Volume of NaOH used) / Volume of vinegar

The molarity of NaOH is given as 0.4125 M. Substituting the values, we get:

Molarity of acetic acid = (0.4125 M) x (17.76 mL) / 10.00 mL

Molarity of acetic acid = 0.729 M

Learn more about Molarity visit: brainly.com/question/30404105

#SPJ4

The average speed of the entire walk from the initial point in the north and the final point in the south is 3.6 km/hr or 1 m/s.

Average speed is defined as the product of the total distance traveled by the object and the total taken by the object. It is a scalar quantity and the SI unit of speed is m/s.

From the given,

Total distance traveled = 8 + 3 = 11 km

Total time taken = 2 + 1  = 3 hour

Average speed = Total distance / Total time taken

                          = 11 / 3

                          = 3.6 km/hr

                          = 3.6 × 5 /18 m/s

                         = 1 m/s

Thus, the average speed of the entire walk is 3.6 km/hr or 1 m/s.

To learn more about average speed :

https://brainly.com/question/12322912

#SPJ1

The mean, mu (μ), of a binomial distribution with n trials and probability of success p is given by μ = np.

Thus, in this case, the mean is μ = 90 * 0.5 = 45.

The variance, sigma squared (σ^2), of a binomial distribution with n trials and probability of success p is given by

σ^2 = np(1-p).

Thus, in this case, the variance is σ^2 = 90 * 0.5 * (1-0.5) = 22.5.

The standard deviation, sigma (σ), of a binomial distribution with n trials and probability of success p is given by

σ = sqrt(np(1-p)).

Thus, in this case, the standard deviation is σ = sqrt(90 * 0.5 * (1-0.5)) ≈ 4.7.

To know more about binomial distribution here

https://brainly.com/question/31197941

#SPJ11

We can infer that the particle must have a negative charge because it is deflected towards the east. 5.34 × [tex]10^{-2}[/tex] N of magnetic force is exerted on the particle and is pointed eastward.

The direction in which our palm faces would be the direction of the magnetic force if we pointed our right thumb in the direction of the particle's velocity, which is northward, and our fingers in the direction of the magnetic field, which is upward. The magnetic force would be towards the east in this situation. We can infer that the particle must have a negative charge because it is deflected towards the east.

The following formula can be used to determine the magnetic force acting on a charged particle travelling in a magnetic field:

qvBsinθ = F

Inputting the values provided yields:

F = (-8.40 × [tex]10^{-6}[/tex] C)

⇒ 4.70 x [tex]10^{-3}[/tex] m/s x 1.27 x T x 90° = -5.34 x [tex]10^{-2}[/tex] N

To learn more about magnetic force visit:

brainly.com/question/3160109

#SPJ1

the water droplet must have 1.56 x 10^11 excess electron charges to create a downward-directed electric field of 150 n/c.

To calculate the excess electron charges on the water droplet, we need to use the formula:
q = E * r^2 / (3 * epsilon * V)
Where:
q = excess electron charges
E = electric field strength (150 n/c)
r = radius of water droplet
epsilon = permittivity of water (8.85 x 10^-12 F/m)
V = volume of water droplet
Assuming the water droplet is a perfect sphere with a radius of 0.5 mm, its volume can be calculated as:
V = 4/3 * pi * r^3 = 5.24 x 10^-4 m^3
Substituting the values into the formula:
q = 150 * (0.5 x 10^-3)^2 / (3 * 8.85 x 10^-12 * 5.24 x 10^-4)
q = 1.56 x 10^11 excess electron charges
Therefore, the water droplet must have 1.56 x 10^11 excess electron charges to create a downward-directed electric field of 150 n/c.
we need to use the formula for the electric field (E) created by a point charge (q), which is given by:
E = k * q / r^2
Where:
- E is the electric field strength (150 N/C in this case)
- k is the electrostatic constant (approximately 8.99 x 10^9 N m^2/C^2)
- q is the charge of the water droplet (in excess electron charges)
- r is the distance from the water droplet to the point where the electric field is being measured (we can assume it is a point on the Earth's surface)
Since we are trying to find the number of excess electron charges (q), we will rearrange the formula to solve for q:
q = E * r^2 / k
Now, let's assume the distance (r) between the water droplet and the Earth's surface is negligible compared to the size of the Earth. This means r^2 will be very small, making the charge q small as well. To find the charge of the water droplet (q), we need to know the charge of a single electron, which is approximately -1.6 x 10^-19 C.
Finally, we need to determine the number of excess electrons (n) that corresponds to the charge q. To do this, we use the formula:
n = q / (charge of one electron)
However, due to the lack of information on the distance (r) in the problem, it is impossible to provide a specific numerical value for the number of excess electron charges. If you can provide the distance (r), I can help you find the number of excess electron charges on the water droplet.

learn more about electron here

https://brainly.com/question/20309096

#SPJ11

The molar mass of the gas is approximately 0.320 g/mol.

To calculate the molar mass of a gas, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

We are given the pressure, temperature, and volume of a gas, as well as the mass of the gas. We can use this information to calculate the number of moles of gas using the following equation:

n = (m/M) x (RT/PV)

where m is the mass of the gas, M is the molar mass of the gas, R is the gas constant, T is the temperature in Kelvin, P is the pressure, and V is the volume.

First, we need to convert the given pressure and temperature to their corresponding SI units.

45 °C + 273.15 = 318.15 K (temperature in Kelvin)

388 torr = 0.511 atm (pressure in atm)

Next, we can calculate the number of moles of gas:

n = (m/M) x (RT/PV)

n = (206 ng / M) x [(0.0821 L atm/(mol K)) x 318.15 K / (0.511 atm) x 0.206 x 10⁻⁶ L]

n = (206 ng / M) x 0.007838

n = 1.612 x 10⁻⁹ (ng/mol) x M

Solving for M, we get:

M = (206 ng / n) x (1/1,000,000 g/ng) / 1 mol

M = 0.320 g/mol

Learn more about molar mass.

brainly.com/question/22997914

#SPJ11