4. You have been offered $3,000 in 4 years for providing $2,000 today into a business venture with a friend. If interest rates are 10%, is this a good investment for you?

The value of t= -1.946; p = 0.029; Reject the null hypothesis; there is strong evidence to suggest that the highlighters last less than 14 hours.

To test the hypothesis that the highlighters last less than 14 hours, we will use a one-sample t-test. The null hypothesis for this test is that the mean continuous writing time for the highlighters is equal to or greater than 14 hours. The alternative hypothesis is that the mean continuous writing time for the highlighters is less than 14 hours.

In this problem, we are given that x = 13.6 hours and s = 1.3 hours. The sample size is n = 40. Substituting these values into the formula for the test statistic, we get:

t = (13.6 - 14) / (1.3 / √(40)) = -1.946

The p-value for the test can be found using a t-distribution table or a statistical software program. The p-value is the probability of observing a t-value as extreme as the one we calculated, assuming the null hypothesis is true. In this problem, the p-value is 0.029.

To make a decision about the null hypothesis, we compare the p-value to the significance level, which is typically set at 0.05. If the p-value is less than the significance level, we reject the null hypothesis. If the p-value is greater than the significance level, we fail to reject the null hypothesis.

In this problem, the p-value is less than 0.05, so we reject the null hypothesis. This means there is strong evidence to suggest that the highlighters last less than 14 hours. We can conclude that the manufacturer's claim that their highlighters can write continuously for 14 hours is not supported by the sample data.

Hence the correct option is (c).

To know more about hypothesis here

https://brainly.com/question/29576929

#SPJ1

Complete Question:

Solve the problem. Suppose a consumer product researcher wanted to find out whether a highlighter lasted less than the manufacturer's claim that their highlighters could write continuously for 14 hours. The researcher tested 40 highlighters and recorded the number of continuous hours each highlighter wrote before drying up. Test the hypothesis that the highlighters wrote for less than 14 continuous hours. Following are the summary statistics:

x =13.6 hours,

s =1.3 hours

Report the test statistic, p-value, your decision regarding the null hypothesis, and your conclusion about the original claim. Round all values to the nearest thousandth.

a)  z = 1.946; p = 0.029; Reject the null hypothesis; there is strong evidence to suggest that the highlighters last less than 14 hours.

b) t = -1.946; p = 0.029; Fail to reject the null hypothesis; there is not strong evidence to suggest that the highlighters last less than 14 hours. o

c)  t= -1.946; p = 0.029; Reject the null hypothesis; there is strong evidence to suggest that the highlighters last less than 14 hours.

d) z = 1.946; p = 0.974; Fail to reject the null hypothesis; there is not “strong evidence to suggest that the highlighters last less than 14 hours.

Answer:

This shows the step by step process of rhetorical reduction of the question given

Answer: 9.32 inches.

Step-by-step explanation:

Answer:

For 25- to 34-year-olds who worked full time, year round, higher educational attainment was associated with higher median earnings.

Step-by-step explanation:

This pattern was consistent for each year from 2010 through 2020. For example, in 2020, the median earnings of those with a master’s or higher degree were $69,700, some 17 percent higher than the earnings of those with a bachelor’s degree ($59,600). In the same year, the median earnings of those with a bachelor’s degree were 63 percent higher than the earnings of those who completed high school ($36,600).

Answer:

To convert kilometers per hour to miles per hour, we need to multiply by 0.62. Therefore, to find the maximum speed that Hannah can drive without exceeding the speed limit of 130 kilometers per hour, we can multiply 130 by 0.62:

130 km/h * 0.62 = 80.6 mph

Since Hannah needs to stay within the speed limit, the maximum whole-number speed she can drive is 80 mph, which is option D.

Step-by-step explanation:

Answer:

196

Step-by-step explanation:

There are 7 choices for the first spot.

4 choices for the second spot. And 7 choices for the third spot, which cannot be 6,7,8--so it can be 0,1,2,3,4,5 or 9 (7choices)

7 × 4 × 7 is 196

There are 196 possibilities for the three digit area code with this plan.

the probability that Juan will catch at least 10 passes out of 15 is approximately 0.987.

The binomial distribution, which models the number of successful trials (catches) in a certain number of independent trials (passes thrown), can be used to solve this problem.

The likelihood of not catching a pass is 0.2, but the likelihood of catching one is 0.8. The likelihood of catching at least 10 passes out of 15 can be calculated as follows:

P(X >= 10) equals P(X = 10) plus P(X = 11). + ... + P(X = 15)

where X is how many of the 15 passes were intercepted.

The probability of catching precisely k passes out of n can be calculated using the binomial distribution formula:

P(X = k) = (n choose k) × p²k × (1 - p)²(n-k)

where (n choose k) is the binomial coefficient, which represents the number of ways to choose k items from a set of n distinct items.

Plugging in the values for n = 15, p = 0.8, and k = 10, 11, 12, 13, 14, and 15, we get:

P(X >= 10) = P(X = 10) + P(X = 11) + ... + P(X = 15)

= (15 choose 10) × 0.8²10 × 0.2²5 + (15 choose 11) × 0.8²11 × 0.2²4 + ... + (15 choose 15) × 0.8²15 × 0.2²0

≈ 0.987

Therefore, the probability that Juan will catch at least 10 passes out of 15 is approximately 0.987.

learn more about probability here:

https://brainly.com/question/30034780

Upper Critical Value; 1.645

p-Value; 0.0814

Reject the null hypothesis

a).

claim: A. The mean breaking distance is different for the two makes of automobiles

H0 and Ha.: E

[tex]\ H_0: \mu_1 = \mu_2 \ \ \ H_a: \mu_1 \neq \mu_2[/tex]

b).

critical values are (-1.645, 1.645)

Rejection region: E. z < -1.645 , z >1.645

c)

test statistic z= -1.743

d).

C. Reject H0. The stat statistic falls in the rejection region.

e).

At the 10% significance level, there is sufficient evidence to support the claim that means breaking distance of make A is different from mean breaking distance of making B.

m 2

M1

7t

Z Test for Differences in Two Means

Data

Hypothesized Difference

0

Level of Significance

0.1

Population 1 Sample

Sample Size

35

Sample Mean

42

Population Standard Deviation

4.9

Population 2 Sample

Sample Size

35

Sample Mean

44

Population Standard Deviation

4.7

Intermediate Calculations

Difference in Sample Means

-2

Standard Error of the Difference in Means

1.1477

Z Test Statistic

-1.7427

Two-Tail Test

Lower Critical Value

-1.645

Upper Critical Value

1.645

p-Value

0.0814

Reject the null hypothesis

Read more about null hypothesis here:

https://brainly.com/question/25263462

#SPJ1

We can use the coordinates of point P (-5, 5) to find the values of the trigonometric functions for the angle formed between the positive x-axis and the line passing through the origin and point P.

First, we can find the distance from the origin to point P using the Pythagorean theorem:

r = sqrt((-5)^2 + 5^2) = sqrt(50)

Next, we can use the fact that the sine of an angle is equal to the y-coordinate of a point on the unit circle and the cosine of an angle is equal to the x-coordinate of a point on the unit circle. Since the radius of the unit circle is 1, we need to divide the x and y coordinates of point P by sqrt(50) to get the values for sine and cosine:

sin(θ) = y/r = 5/sqrt(50) = (5/10)sqrt(2) = (1/2)sqrt(2)

cos(θ) = x/r = -5/sqrt(50) = -(5/10)sqrt(2) = -(1/2)sqrt(2)

Next, we can use the fact that the tangent of an angle is equal to the sine of the angle divided by the cosine of the angle:

tan(θ) = sin(θ)/cos(θ) = (1/2)sqrt(2)/(-(1/2)sqrt(2)) = -1

Similarly, we can use the reciprocal identities to find the values of the other three trigonometric functions:

csc(θ) = 1/sin(θ) = sqrt(2)

sec(θ) = 1/cos(θ) = -sqrt(2)

cot(θ) = 1/tan(θ) = -1

Therefore, the exact values of the six trigonometric functions for the angle formed by the line passing through the origin and point P (-5, 5) are:

sin(θ) = (1/2)sqrt(2)

cos(θ) = -(1/2)sqrt(2)

tan(θ) = -1

csc(θ) = sqrt(2)

sec(θ) = -sqrt(2)

cot(θ) = -1

IG:whis.sama_ent

Betty consumed a total of 148.294 milliliters of liquid with her breakfast.

We can change the volumes of the coffee and orange juice to milliliters so that all of the measurements are in the same unit:

4 ounces =  4 * 29.5735, = 118.294 ml.

8 ounces = 8 x 29.5735, = 236.588 ml.

Half of Betty's 4-ounce glass of orange juice, or:

1/2 * 118.294 mls = 59.147 mls

She consumed 25% of her 8-ounce coffee, which is :

0.25 * 236.588 mls = 59.147 mls.

So, in total, Betty consumed:

30 mls of cough medicine + 59.147 mls of orange juice + 59.147 mls of coffee = 148.294 mls

Therefore, Betty consumed a total of 148.294 milliliters of liquid with her breakfast.

Learn more about milliliters here : brainly.com/question/28920784

#SPJ1

Emilio can find that the critical value t* for a 90% confidence level and 11 degrees of freedom is approximately 1.796.

To construct a t interval for the mean lifespan with 90% confidence, Emilio needs to use a t-distribution with n-1 degrees of freedom. The confidence interval for the population is given by:

confidence interval = x ± t × (s·x/√n)

Where x is the sample mean, s·x is the sample standard deviation, n is the sample size, and t is the critical value of the t-distribution.

Since the sample size is n=12, the degrees of freedom for the t-distribution will be (n-1) = 11. To find the critical value t* for a 90% confidence level and 11 degrees of freedom, Emilio can use a t-distribution table or a statistical software.

Using a t-distribution table or calculator, Emilio can find that the critical value t* for a 90% confidence level and 11 degrees of freedom is approximately 1.796.

To know more about  standard deviation, visit:

https://brainly.com/question/28528375

#SPJ1

Answer:

the value of B is 3

Step-by-step explanation:

We can start by factoring out the greatest common factor of the polynomial, which is 2x:

2x(6x3 + 15x2 + 2x + 5)

Now, we can factor the expression inside the parentheses by grouping:

2x[(6x3 + 2x) + (15x2 + 5)]

2x[2x(3x + 1) + 5(3x + 1)]

2x(2x + 5)(3x + 1)

Comparing this expression to the given expression:

Ax(Bx2+1)(2x+5)

We see that A = 2, B = 3, and the factor (2x + 5) is the same in both expressions. Therefore, the value of B is 3.

It can be seen that if the circumference were smaller, the area would decrease, as it is proportional to the square of the radius.

Given the circumference (C) of the hub cap as 83.90 cm, we can find the radius (r) using the formula C = 2 * π * r,

where π = 3.14.

Thus, r ≈ 13.363 cm.

To find the area (A), use the formula A = π * r^2, yielding A ≈ 560.509 cm². Rounded, the area is about 561 cm².

Therefore, it can be seen that if the circumference were smaller, the area would decrease, as it is proportional to the square of the radius.

Read more about circumference here:

https://brainly.com/question/20489969

#SPJ1

Answer:

Step-by-step explanation:

To find the number of seconds it will take for the planes to be at the same altitude, we need to set the altitude equations for both planes equal to each other and solve for time:

2639 + 35.25t = h    (altitude equation for Plane A)

0 + 80.75t = h       (altitude equation for Plane B)

where h is the altitude of both planes when they are at the same altitude, and t is the number of seconds that have passed.

Setting the two equations equal to each other and solving for t, we get:

2639 + 35.25t = 80.75t

45.5t = 2639

t = 58

Therefore, it will take 58 seconds for the planes to be at the same altitude.

To find their altitude at that time, we can substitute t = 58 into either of the altitude equations and solve for h:

2639 + 35.25t = h

2639 + 35.25(58) = h

h = 4818.5

Therefore, when the planes are at the same altitude, their altitude will be approximately 4818.5 feet.

The standard deviation of the number of green M&M's in a sample of 5 is 0.91

Standard deviation is a measure of the amount of variation or dispersion of a set of data values. It is calculated by finding the square root of the variance, which is the average of the squared differences from the mean.

To solve this problem, we can use the binomial probability formula:

[tex]P(X=k) = C(n,k) * p^k * (1-p)^{(n-k)[/tex]

where:

X is the number of green M&M's in the sample

k is the number of green M&M's we are interested in (3 or 4 or at most 3 or at least 3)

n is the sample size (5)

p is the probability of getting a green M&M in one trial

We can use the given percentages to calculate the probability of getting a green M&M:

p = 0.15

Now we can calculate the probabilities for the different scenarios:

Probability that exactly three of the five M&M's are green:

[tex]P(X=3) = C(5,3) * 0.15^3 * 0.85^2 = 0.0883[/tex]

Probability that three or four of the five M&M's are green:

[tex]P(X=3\ or\ X=4) = P(X=3) + P(X=4) = C(5,3) * 0.15^3 * 0.85^2 + C(5,4) * 0.15^4 * 0.85^1 = 0.1527[/tex]

Probability that at most three of the five M&M's are green:

P(X≤3) = [tex]P(X=0) + P(X=1) + P(X=2) + P(X=3) = C(5,0) * 0.15^0 * 0.85^5 + C(5,1) * 0.15^1 * 0.85^4 + C(5,2) * 0.15^2 * 0.85^3 + C(5,3) * 0.15^3 * 0.85^2 = 0.9053[/tex]

Probability that at least three of the five M&M's are green:

P(X≥3) [tex]= P(X=3) + P(X=4) + P(X=5) = C(5,3) * 0.15^3 * 0.85^2 + C(5,4) * 0.15^4 * 0.85^1 + C(5,5) * 0.15^5 * 0.85^0 = 0.2413[/tex]

To find the expected number of green M&M's in a sample of size 5, we can use the formula:

E(X) = n * p

where E(X) is the expected value of X.

E(X) = 5 * 0.15 = 0.75

Therefore, on average we expect 0.75 green M&M's in a sample of 5.

To find the standard deviation, we can use the formula:

SD(X) = sqrt(n * p * (1-p))

SD(X) = sqrt(5 * 0.15 * 0.85) = 0.9138 (rounded to two decimal places)

Therefore, the standard deviation of the number of green M&M's in a sample of 5 is 0.91

To know more about standard deviation visit:

https://brainly.com/question/475676

#SPJ1

The solution equates to f(x) = 6x + 8.

Reiterating the same statement without reiteration, it is observed that f'(x) equals ƒ""(x), ultimately resulting in a value of 6. Subsequently, we can derive a complete expression for f(x) where C represents an integration constant.

It should be noted that to find this constant, since f(-1) = 2, plugging in x as -1 and f(x) as 2 into the above equation results in:

2 = 6(-1) + C

C = 8

As such, we can confirm that the entire expression of f(x) is simply 6 times x added to 8. Validating this answer, when assessing f(0) or f(1) , either result should match the given values from our initial problem which they do. Hence, the solution equates to:

f(x) = 6x + 8.

Learn more about functions on

https://brainly.com/question/11624077

#SPJ1

Answer:

----------------------

If the system of linear equations has infinitely many solutions, it means the two lines overlap.

In other words, each point of one of the lines also belongs to the second line.

Choices a, b, c  give us one or no solutions and therefore not the answer.

Choice d is reflecting the infinitely many solutions and hence is the correct one.

Answer:

1

Step-by-step explanation:

1.  One way to do this is converting both into improper fractions.  To do this, multiply the whole number by the denominator and add that to the numerator.

2 3/5 --> 2*5 is 10 --> 10+3 is 13.  --> 13/5

2.  This leaves us with 13/5 - 8/5

3.  Subtract the numerators

13/5 - 8/5 = 5/5

4.  Simplify.  If the numerator is the same number as the denominator, it's a whole number.

5/5 = 1

The maximum height at the moment is 191.0625 ft.

What is the projectile's height?

Let's find out the projectile's maximum height now that we know what it is. The highest vertical location along the object's flight is considered to be its maximum height. The range of the bullet is defined as its horizontal displacement.

Here, we have

Given: The equation for a projectile's height versus time is h(t)=-16t²+Vt+h. A tennis ball machine serves a ball vertically into the air from a height of 2 feet, with an initial speed of 110 feet per second.

The equation for a projectile's height versus time is

h(t) = -16t²+Vt+h

h = 2

V = 110

Substitute these values into the function

h(t) = -16t²+110t+2

Take the first derivative

h'(t) = -32t + 110

Equate the derivative with zero h'(t) = 0

0 = -32t + 110

110 = 32t

t = 110/32

t = 3.4375

Find the maximum height at the moment

t = 3.4375 (s)

h(3.4375) = -16(3.4375)² + 110(3.4375) + 2

h(3.4375) = -189.0625 + 378.125 + 2

h(3.4375) = 191.0625 ft

Hence, the maximum height at the moment is 191.0625 ft.

To learn more about the projectile's height from the given link

https://brainly.com/question/29036836

#SPJ1

The length of the shadow would be approximately 41.7 feet if the angle of elevation from the horizontal to the sun is 38° at this time.

If the angle of elevation from the horizontal to the sun is 38°, then the tangent of that angle is equal to the opposite side (the height of the tree) divided by the adjacent side (the length of the shadow).

Therefore, we can set up the equation using trigonometric function tangent as,
tan(38°) = height of tree / length of shadow

Solving for the length of the shadow, we get:
length of shadow = height of tree / tan(38°)

Plugging in the given height of the tree (32 feet) and using a calculator to find the tangent of 38°, we get:
length of shadow = 32 / tan(38°) = 41.7 feet (rounded to one decimal place)

Therefore, the length of the shadow would be approximately 41.7 feet at this time.

To learn more about, Trigonometric functions, visit:

https://brainly.com/question/25618616

Answer:

Step-by-step explanation:

You want the lists of ordered pairs that represent a functional relation.

A function maps an input value to exactly one output value. A set of ordered pairs will represent a function if no input (x-value) is repeated.

We only need to look at the first values of the ordered pairs.

  (a) 2 is repeated

  (b) -4 is repeated

  (c) a function

  (d) 7 is repeated

  (e) a function

Answer:

Step-by-step explanation:

You want the lists of ordered pairs that represent a functional relation.

A function maps an input value to exactly one output value. A set of ordered pairs will represent a function if no input (x-value) is repeated.

We only need to look at the first values of the ordered pairs.

  (a) 2 is repeated

  (b) -4 is repeated

  (c) a function

  (d) 7 is repeated

  (e) a function

Answer:

The product of the sum and difference of the same two terms is always the difference of two squares; it is the first term squared minus the second term squared.

Step-by-step explanation:

Thus, this resulting binomial is called a difference of squares.

Answer:

Step-by-step explanation:

Square of the sum

square means you are multiplying something twice and looks like:  

ex.       [tex]x*x=x^{2}[/tex]

sum is the addition of numbers

so square of the sum looks like:

(a+b)²

Square of the difference

difference means subtraction of numbers

so square of the difference looks like:

(b-a)²

Answer:

The product of the sum and difference of the same two terms is always the difference of two squares; it is the first term squared minus the second term squared.

Step-by-step explanation:

Thus, this resulting binomial is called a difference of squares.

Answer:

Step-by-step explanation:

Square of the sum

square means you are multiplying something twice and looks like:  

ex.       [tex]x*x=x^{2}[/tex]

sum is the addition of numbers

so square of the sum looks like:

(a+b)²

Square of the difference

difference means subtraction of numbers

so square of the difference looks like:

(b-a)²

The 95% confidence interval of the mean pulse rate for adult females is 68.2 bpm < μ < 76.4 bpm

For a 95% confidence interval, the Z-score is 1.96. Plugging in the values we have for the sample mean, sample standard deviation, and sample size, we get:

Confidence interval = 75.8 ± (1.96 × (3.7 / √50))

Simplifying the expression, we get:

Confidence interval = 71.5 bpm < μ < 80.2 bpm

This means that we can be 95% confident that the true population mean pulse rate for adult females falls within this range.

Now let's construct a confidence interval for adult males. We are given that the sample mean pulse rate for adult males is 72.3 bpm, and the sample standard deviation is 4.0 bpm. Using the same formula and Z-score as before, we can calculate the confidence interval as follows:

Confidence interval = 72.3 ± (1.96 × (4.0 / √50))

Simplifying the expression, we get:

Confidence interval = 68.2 bpm < μ < 76.4 bpm

This means that we can be 95% confident that the true population mean pulse rate for adult males falls within this range.

To know more about confidence interval here

https://brainly.com/question/24131141

#SPJ1

The sales tax on 250 dollars purchase is: $3865

We are told that sales tax is directly proportional to retail price. Thus:

S ∝ p

Any item that sells for 158 dollars has a sales tax of 10.22 dollars. Thus:

158 = 10.22k

where k is constant of proportionality

Thus:

k = 158/10.22

k = 15.46

Thus, the equation is:

S = 15.46p

Sales tax on 250 dollars purchase is:

S = 15.46 * 250

S = $3865

Read more about Equation Model at: https://brainly.com/question/28732353

#SPJ1

The intercepts of the equation are: D. D. x-intercept (-7/4, 0), y-intercept (0,7).

The x-intercept of an equation is simply the value of x when the corresponding value of y equals zero. Also, this is where the line of the equation cuts across the x-axis on a graph.

The y-intercept of an equation, on the other hand, is the value of y when the corresponding value of x equals zero. It is the point where the line of the equation cuts across the y-axis on a graph.

Thus, given the equation y = 4x + 7, the y-intercept is:

y = 4(0) + 7

y = 7

The x-intercept is:

0 = 4x + 7

-4x = 7

x = 7/-4

x = -7/4

The correct option is: D. x-intercept (-7/4, 0), y-intercept (0,7).

Learn more about x-intercept on:

https://brainly.com/question/24363347

#SPJ1

The equation represents the line of best fit is y = -2x + 22.

A mathematical statement that represents a relationship between two or more quantities is typically expressed using symbols, numbers, and mathematical operations. Equations are used to express mathematical relationships, make predictions, and solve problems. An equation typically consists of an expression on each side of an equal sign (=), indicating that the values on both sides are equivalent.

According to the given information:

To determine the equation of the line of best fit in the scatter plot, we can use the slope-intercept form of a linear equation, which is given by:

y = mx + b

where m is the slope and b is the y-intercept.

Given that the line of best fit goes through points (5, 12) and (9, 4), we can calculate the slope (m) using the formula:

m = [tex]\frac{(y_{2}-y_{1})}{(x_{2}-x_{1} ) }[/tex]

Plugging in the values from the given points, we get:

m = [tex]\frac{(4-12)}{(9-5)}[/tex]

m = -8 / 4

m = -2

So, the slope of the line of best fit is -2.

Next, we can substitute the slope and one of the given points (5, 12) into the slope-intercept form to solve for the y-intercept (b):

12 = -2(5) + b

12 = -10 + b

b = 12 + 10

b = 22

So, the y-intercept of the line of best fit is 22.

Thus, the equation of the line of best fit is:

y = -2x + 22.

To know more equation visit: https://brainly.com/question/10413253

#SPJ1