Answer:
700 J
Explanation:
Work = Force * Distance
Work = 350 N * 2 M = 700 J
What happened when you heat the candle wax
Answer:
your hand will be heat you will feel small pain inside your hand
(b) The pressure of the helium in the balloon is 100 000 Pa.
The volume of the balloon is 0.030 m².
The balloon is compressed at a constant temperature causing the volume to
decrease to 0.025 m².
No helium leaves the balloon.
Calculate the new pressure in the balloon
Taking into account the Boyle's law, the new pressure in the balloon is 120 000 Pa.
What is Boyle's lawBoyle's law establishes the relationship between the pressure and the volume of a gas when the temperature is constant.
Boyle's law states that the pressure of a gas in a closed container is inversely proportional to the volume of the container, when the temperature is constant: if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.
Mathematically, this law says that if the amount of gas and the temperature remain constant, the product of pressure times volume always has the same value:
P×V= k
Now it is possible to assume that you have a certain volume of gas V1 which is at a pressure P1 at the beginning of the experiment. If you vary the volume of gas to a new value V2, then the pressure will change to P2, and the following is true:
P1×V1=P2×V2
New pressure in the ballonIn this case, you know:
P1= 100 000 PaV1= 0.030 m²P2= ?V2= 0.025 M²Replacing in the Boyle's law:
100 000 Pa×0.030 m² =P2×0.025 m²
Solving:
(100 000 Pa×0.030 m²) ÷0.025 m²= P2
120 000 Pa= P2
Finally, the new pressure in the balloon is 120 000 Pa.
Learn more about Boyle's law:
https://brainly.com/question/4147359
#SPJ1
What are some good things I can add to my biome slides to make them look great ?
Answer:
Discuss Your Presentation With an Expert
1) Skip the Stock Template.
2) Don't Use More than 6 Lines of Text.
3) Ditch the Bullet Points.
4) Use Sans Serif Fonts.
5) Size Fonts Appropriately.
6) Maintain a Strong Contrast Between Text and Background.
7) Use No More than 5 Colors.
8) Use Contrasting Text Colors to Draw Attention.
A 950-kg car strikes a huge spring at a speed of 22m/s (fig. 11-54), compressing the spring 5.0m. (a) what is the spring stiffness constant of the spring? (b) how long is the car in contact with the spring before it bounces off in the opposite direction?
(a) The spring stiffness constant of the spring is 18,392 N/m.
(b) The time the car was in contact with the spring before it bounces off in the opposite direction is 0.23 s.
Kinetic energy of the carThe kinetic energy of the car is calculated as follows;
K.E = ¹/₂mv²
K.E = ¹/₂ x 950 x 22²
K.E = 229,900 J
Stiffness constant of the springThe stiffness constant of the spring is calculated as follows;
K.E = U = ¹/₂kx²
k = 2U/x²
k = (2 x 229,900)/(5)²
k = 18,392 N/m
Force exerted on the springF = kx
F = 18,392 x 5
F = 91,960 N
Time of impactF = mv/t
t = mv/F
t = (950 x 22)/(91960)
t = 0.23 s
Learn more about spring constant here: https://brainly.com/question/1968517
#SPJ4
The mass of a bicyclist and a bicycle together is 53.0 kg. How much work has been
done if the bicyclist slows the bicycle from a speed of 3.84 m/s to 1.27 m/s?
(A) -68.1 J
(B) -136 J
(C) -348 J
(D) -696 J
Answer:
Approximately [tex](-348\; {\rm J})[/tex], assuming that the bike was on level ground.
Explanation:
If an object of mass [tex]m[/tex] is moving at a speed of [tex]v[/tex], the kinetic energy of that object would be [tex](1/2)\, m\, v^{2}[/tex].
At a speed of [tex]v = 3.84\; {\rm m\cdot s^{-1}}[/tex], the kinetic energy of the bike and the cyclist- combined- would be:
[tex]\begin{aligned} &\frac{1}{2}\, m\, v^{2} \\=\; &\frac{1}{2}\times 53.0\; {\rm kg} \times (3.84\; {\rm m\cdot s^{-2}})^{2} \\ \approx \; & 390.76\; {\rm J}\end{aligned}[/tex].
At a speed of [tex]v = 1.27\; {\rm m\cdot s^{-1}}[/tex], the kinetic energy of the bike and the cyclist- combined- would be:
[tex]\begin{aligned} &\frac{1}{2}\, m\, v^{2} \\=\; &\frac{1}{2}\times 53.0\; {\rm kg} \times (1.27\; {\rm m\cdot s^{-2}})^{2} \\ \approx \; &42.741 \; {\rm J}\end{aligned}[/tex].
The energy change was approximately:
[tex]390.76\; {\rm J} - 42.741\; {\rm J} \approx 348\; {\rm J}[/tex].
If the bike was on level ground, the friction on the bike and the cyclist would have done a work of [tex](-348\: {\rm J})[/tex] to reduce the kinetic energy of the bike and the cyclist by that amount.
Answer: C) -348J
Explanation:
42.741 - 390.76 (the kinetic energy of the two speeds) is equal to -348.
What is the most likely outcome? it will become a permanent magnet because the domains will remain aligned. it will become a temporary magnet because the domains will remain aligned. it will become a permanent magnet because the domains will easily realign. it will become a temporary magnet because the domains will easily realign.
The likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.
What is a magnet?A magnet is a material whose magnetic domains are properly aligned. These materials are able to attract other materials that are magnetizable.
Hence, the likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.
Missing parts:
A magnetically soft material is placed in a strong magnetic field. What is the most likely outcome?
a. It will become a permanent magnet because the domains will remain aligned.
b. It will become a temporary magnet because the domains will remain aligned.
c. It will become a permanent magnet because the domains will easily realign.
d. It will become a temporary magnet because the domains will easily realign.
Learn more about magnets:https://brainly.com/question/14301573
#SPJ1
Answer: D or It will become a temporary magnet because the domains will easily realign.
Explanation: Taking the quiz!
A dentist's chair with a person in it weighs 1675 N. The output plunger of a hydraulic system starts to lift the chair when the dental assistant's foot exerts a force of 39 N on the input piston. Neglecting any difference in the heights of the piston and the plunger, what is the ratio of the area of the plunger to the area of the piston
The ratio of the area of the plunger to the area of the piston will be 0.2323.
What is pressure?
The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure.
It is denoted by P. The pressure relative to the ambient pressure is known as gauge pressure.
The presure at the output remains the same
[tex]\rm P_0=P_I \\\\\ \frac{F_0}{A_o} =\frac{F_I}{A_I} \\\\ \frac{A_0}{A_I} = \frac{F_0}{F_I} \\\\ \frac{A_0}{A_I} =\frac{39}{1675} \\\\ \frac{A_0}{A_I} =0.2323[/tex]
Hence, the ratio of the area of the plunger to the area of the piston will be 0.2323.
To learn more about the pressure refer to the link;
https://brainly.com/question/356585
#SPJ1
Choice are 1.3 1.0 17
The current flowing in resistor 1 in the given series circuit is determined as 1.0 A.
Equivalent resistance of the circuit
The equivalent resistance of the circuit is determined as follows;
Rt = R1 + R2
Rt = 15 + 5
Rt = 20ohms
Current flowing in the circuitThe current flowing in the circuit is determined from Ohm's law.
V = IR
I = V/R
I = 20/20
I = 1.0 A
since it is series circuit, same current will flow in R1 and R2.
Thus, the current flowing in resistor 1 in the given series circuit is determined as 1.0 A.
Learn more about current here: https://brainly.com/question/24858512
#SPJ1
If a person with a mass of 136 kg has an acceleration of 0.5 m/s/s when pushing off a wall, calculate the force.
272 newtons away from wall
0.00368 newtons toward wall
68 newtons away from wall
68 newtons toward wall
The force of the person is 68 N away from the wall.
What is force?Force is the product of mass and acceleration.
To calculate the force used by the person to push the wall, we use the formula below.
Formula:
F = ma............ Equation 1Where:
F = Force on the wallm = mass of the persona = acceleration due to gravity.From the question,
Given:
m = 136 kga = 0.5 m/s² off the wallSubstitute these values into equation 1
F = 136×0.5F = 68 N away from the wallHence, the force of the person is 68 N away from the wall.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
G= 10m/s
A 50kg student jumps out of a window onto a pile of mattresses.
(a) Ignoring air resistance, what is her increase in speed each second?
B) What is her change of momentum each second?
The increase in velocity of the student per second is 10 m/s^2 and her change in momentum each second is 500 kgm/s^2.
What is the change in velocity per second for any object falling freely under gravity?The change in velocity of a moving object is known as acceleration.
For any object falling freely under gravity, the change in velocity per second or acceleration due to gravity is a constant and is equal to 10 metres per square second (10 m/s^2).
The change in momentum of a body is given as follows:
Momentum = mass × velocity Change in momentum = mv - muChange in momentum = m(v - u)acceleration = v - uwhere m is mass, v is final velocity and u is final velocity.
Mass of the student = 50 Kg
Change in momentum each second = 50 kg × 10 m/s^2 = 500 kgm/s^2
Therefore, the increase in velocity of the student per second is 10 m/s^2 and her change in momentum each second is 500 kgm/s^2.
Learn more about change in momentum at: https://brainly.com/question/27778439
#SPJ1
Pls answer, i need help :(
Answer: B
Explanation: AN increase in heat out
A roller coaster glides from rest from the top of an 80.0 meter hill. What is the speed of the roller coaster at the bottom of the hill?
6.32 m/s
39.6 m/s
12.6 m/s
19.8 m/s
Based on the calculations, the speed of this roller coaster at the bottom of the hill is equal to: B. 39.6 m/s.
Given the following data:
Height = 80.0 meters.
Scientific data:
Acceleration due to gravity (g) = 9.8 m/s².
How to calculate the speed?In accordance with the law of conservation of energy, the potential energy possessed by the roller coaster at the top is equal to the kinetic energy possessed by the roller coaster at the bottom of the hill:
PE = KE
mgh = ½mv²
2mgh = mv²
v = √(2gh)
Substituting the given parameters into the formula, we have;
v = √(2 × 9.8 × 80)
v = √1,568
Speed, v = 39.6 m/s.
Read more on potential energy here: https://brainly.com/question/1242059
#SPJ1
If you had a 14 m long timeline, where would the extinction of the dinosaurs be?
Captionless Image
About 1 m from the end where the universe formed.
About in the middle.
About 3/4 of the way from where the origin of the universe was to the end representing now.
Less than one meter from the end representing now.
If you had a 14 m long timeline, the dinosaurs would be less than one meter from the end.
What is extinction of species?
The extinction of species or organisms is the process by which some environmental factors cause a decline in the number of species through death.
Dinosaurs are some of the examples of species that are in extinct.
Since dinosaurs are in extinction, If you had a 14 m long timeline, the dinosaurs would be less than one meter from the end.
Learn more about extinction here: https://brainly.com/question/1048615
#SPJ1
A ray of light (f = 5.09 × 1014 Hz) is traveling through a mineral sample that is submerged in water. The ray refracts as it enters the water, as shown in the diagram below.
Calculate the absolute index of refraction of the mineral
From the calculations, the absolute refractive index of the material is 0.6.
What is refractive index?The refractive index is the ratio of the sine of the angle of incidence to the sine of the angle of refraction.
Having looked at the path of the travelling light wave, we can see that the absolute refractive index of the ray of light is; sine 27/sin 49 = 0.454/0.755
= 0.6
Learn more about refractive index:https://brainly.com/question/23750645
#SPJ1
What name is given to the force on an object caused by Earth's gravitational pull?
Answer:
gravity
Explanation:
Car 2 passes car 1. To a stationary observer, car 1 has a velocity of 28 m/s to the east and car 2 has a velocity of 33 m/s to the east. How much time will pass before car 2 is 14 m ahead of car 1?
Answer:
[tex]2.8\; {\rm s}[/tex].
Explanation:
The velocity of vehicle [tex]2[/tex] relative to vehicle [tex]1[/tex] is:
[tex]\begin{aligned}& \text{velocity of 2 relative to 1} \\ =\; & (\text{velocity of 2 relative to ground}) \\ &- (\text{velocity of 1 relative to ground}) \\ =\; & 33\; {\rm m\cdot s^{-1} - 28\; {\rm m\cdot s^{-1}} \\ =\; & 5\; {\rm m\cdot s^{-1}} && (\text{to the east})\end{aligned}[/tex].
The displacement of vehicle [tex]2[/tex] relative to vehicle [tex]1[/tex] is currently [tex]0\; {\rm m}[/tex]. The rate at which this displacement increases is equal to the velocity of vehicle [tex]2\![/tex] relative to vehicle [tex]1\![/tex], which is [tex]5\; {\rm m\cdot s^{-1}}[/tex].
Thus, it would take [tex](14 \; {\rm m}) / (5\; {\rm m\cdot s^{-1}}) = 2.8\; {\rm s}[/tex] for this displacement to reach [tex]14\; {\rm m}[/tex].
Which statement belongs to daltons atomic theory
Atoms cannot be broken down into smaller pieces is the statement belongs to daltons atomic theory. Option B is correct.
What is an atom?The atom consists of matter that may be split without releasing electrical charges. It's also the smallest unit of matter with chemical element features.
The complete question is:
"Which statements belong to Dalton's atomic theory? Select all that apply.
A)Atoms cannot be created or destroyed.
B)Atoms cannot be broken down into smaller pieces.
C)All atoms of an element are identical.
D)Chemical reactions cause atoms to be rearranged."
According to Dalton's atomic hypothesis, atoms cannot be broken down into smaller bits.
Hence, option B is correct.
To learn more about the atom refer to the link;
https://brainly.com/question/1566330
#SPJ1
A brick is kept in 2 different ways on a table as shown
below. which brick exerts more pressure? Why?
Answer:
A
Explanation:
when area increases pressure decrease
for example, a sharp nail's area is lower than a blunt nail, so sharp nail is easy to fix
so, here a exerts more pressure
Answer:
a
Explanation:
Rearrange the equation = KE
-1
2
- my? to solve for v. Show your work.
Answer:
See below
Explanation:
KE = 1/2 m v^2 multiply both sides by 2
2 (KE) = mv^2 divide both sides by m
2(KE) / m = v^2 sqrt both sides
√ [(2KE)/m ] = v
A car speeds past a stationary police officer while traveling 135 km/h. the officer immediately begins pursuit at a constant acceleration of 11.8 km/h/s, just as the driver passes her.
a. how much time, in seconds, will it take for the police officer to catch up to the speeding car, assuming that the car maintains a constant speed?
b. how fast, in kilometers per hour, will the police officer be traveling at the time he catches up to the driver?
(a) The time it takes for the police officer to catch up to the speeding car is determined as 0.31 s.
(b) The speed of the police officer at the time he catches up to the driver is 136.8 km/h.
Time of motion of the police
The time taken for the police to catch up with the driver is calculated as follows;
v = at
where;
a is acceleration = 11.8 km/h/s, = 3.278 m/s²v is velocity = 135 km/h = 37.5 m/st = v/a
t = 37.5/3.278
t = 11.4 seconds
(v1 - v2)t = ¹/₂at² --- (1)
(v1 - v2)t = v1²/2a --- (2)
From (1):
(v1 - 37.5)t = ¹/₂(3.278)t²
(v1 - 37.5)t = 1.639t²
v1 - 37.5 = 1.639t
v1 = 1.639t + 37.5 -----(3)
From (2):
(v1 - 37.5)t = v1²/(2 x 3.278)
(v1 - 37.5)t = 0.153 ----- (4)
solve 3 and 4;
(1.639t + 37.5 - 37.5)t = 0.153
1.639t² = 0.153
t² = 0.0933
t = 0.31 s
Speed of the police officerv1 = 1.639(0.31) + 37.5 = 38 m/s = 136.8 km/h
Learn more about velocity here: https://brainly.com/question/4931057
#SPJ1
Four students measured the acceleration of gravity. the accepted value for
their location is 9.78 m/s2. which student's measurement has the largest
percent error?
The student 4 measurement has the largest percent error. The discrepancy between the calculated value and the correct value is referred to as an "error" in statistics.
What is the error?An error is a mistaken or erroneous action. In some contexts, an error is interchangeable with a mistake.
The complete question is
'Four students measured the acceleration of gravity. The accepted value for their location is 9.78m/s2. Which student’s measurement has the largest percent error?
A. Student 4: 9.61 m/s2
B. Student 3: 9.88 m/s2
C. Student 2: 9.79 m/s2
D. Student 1: 9.78 m/s2"
The percentage error is found as;
[tex]\rm \% error = \frac{a_A-a_E}{a_E} \times 100[/tex]
The percentage error in the gIven four students is obtained by putting the values in the given problem;
Student 1 ;
[tex]\rm \% error = \frac{9.78-9.78}{9.88}\times 100 \\\\\ \% error = 0 \%[/tex]
Student 2 ;
[tex]\rm \% error = \frac{9.78-9..79}{9.79}\times 100 \\\\\ \% error = - 0.10 \%[/tex]
Student 3 ;
[tex]\rm \% error = \frac{9.78-9.88}{9.88}\times 100 \\\\\ \% error = - 1.01 \%[/tex]
Student 4 ;
[tex]\rm \% error = \frac{9.78-9.61}{9.61}\times 100 \\\\\ \% error =1.77\%[/tex]
Student 4 reports the maximum percentage error.
Hence the student 4 measurement has the largest percent error.
To learn more about the error refer to the link;
https://brainly.com/question/13286220
#SPJ1
A solenoid has 18 turns per centimeter of its length. the solenoid is twisted into a circle so that it becomes shaped like a toroid. what is the magnetic field at the center of each turn of the toroid
A solenoid has 18 turns per centimeter of its length. the solenoid is twisted into a circle so that it becomes shaped like a toroid, the magnetic field at the center of each turn of the toroid is mathematically given as
B=3.39292007×10^−5 T
What is the magnetic field at the center of each turn of the toroid?Generally, the equation for magnetic field is mathematically given as
B=\mu_0 * n *I
Where
n=18
n=1800turns/m
Therefore
B=4*\pi*10^{-7}*1800*15*10^{-3}
B=3.39292007×10^−5T
In conclusion, the magnetic field at the center of each turn of the toroid is
B=3.39292007×10^−5T
Read more about magnetic field
https://brainly.com/question/7802337
#SPJ1
As the car falls off the cliff, what is happening to the kinetic energy of the falling car?
Answer:
It loses potential energybut gains kinetic energy.
Explanation:
Which option is an example of an object that has potential energy followed by an object that has kinetic energy?
A ball held over a person's head | a ball rolling on the floor is an example of an object that has potential energy followed by an object that has kinetic energy.
What is Kinetic energy?This is the type of energy possessed by a body by virtue of its motion or movement.
The rolling ball therefore has kinetic energy while a ball being held over a person's head has potential energy which is the energy possessed by a body by virtue of its position.
Read more about Kinetic energy here https://brainly.com/question/8101588
#SPJ1
Ben walks 500 meters from his house to the corner store. He then walks back toward his house, but continues 200 meters past his house to talk to a neighbor. It takes Ben 17 minutes from the time he leaves his house until he stops to talk to his neighbor.
Considering the definition of velocity, the average velocity of Ben is 0.3 [tex]\frac{meters}{second}[/tex].
Definition of velocityVelocity is a physical magnitude that relates the displacement of an object, the time it takes to make this change in position and direction.
Because the speed also considers the direction in which the displacement of an object occurs, it is considered a vector magnitude.
So, the velocity can be defined as the amount of space traveled per unit of time with which a body moves, considering the direction, and can be calculated using the expression:
[tex]velocity=\frac{distancetraveled}{time}[/tex]
Velocity has units of [tex]\frac{distance}{time}[/tex], such as [tex]\frac{meters}{second}[/tex] or [tex]\frac{meters}{minute}[/tex], and includes direction of travel.
SummaryBen walks 500 meters from his house to the corner store. He then walks back toward his house, but continues 200 meters past his house to talk to a neighbor.
So, you know:
Distance traveled= distance from the start-point to the end-point= 500 - 200= 300 meters from Ben's house to the neighbor.Time= 17 minutes= 1020 seconds (being 1 minute= 60 seconds).Replacing in the definition of velocity:
[tex]velocity=\frac{300 meters}{1020 seconds}[/tex]
Solving:
velocity= 0.3 [tex]\frac{meters}{second}[/tex]
Finally, the average velocity of Ben is 0.3 [tex]\frac{meters}{second}[/tex].
Learn more about velocity:
brainly.com/question/4418301
brainly.com/question/24990123
brainly.com/question/14244558
brainly.com/question/25288184
#SPJ1
I NEED AN ANSWER HURRY.
what keeps earth and other objects in the solar system from spinning off into outer space?
rotation, gravity, Coriolis effect, or currents?
Answer:
Force of gravity.
So I think it's the gravity option?
Gravity keeps earth and other objects in the solar system from spinning off into outer space.
What is meant by gravity ?The force that pulls objects towards the center of a planet or other body is known as gravity.
Here,
Since it depicts the interaction that results when two masses are in close proximity, gravity is in fact a force. The warping of spacetime and the motion of things through the stretched spacetime are the primary causes of gravitational effects.
It appears as though a force was exerted towards the end, though.
The force that pulls objects towards the centre of a planet or other body is known as gravity. All of the planets are kept in orbit around the sun by the force of gravity.
We are confined to the surface of the Earth by gravity alone. Size, mass, density, and composition of planets are all quantifiable characteristics. The gravitational pull of a planet is determined by its size and mass.
Hence,
Gravity keeps earth and other objects in the solar system from spinning off into outer space.
To learn more about gravity, click:
https://brainly.com/question/14874038
#SPJ2
Some iron has a coefficient of linear expansion of 12 x 10-6 / o K . A 100 mm length of iron piping is heated through 20 K. The pipe extends by:
Given that the linear expansion of the pipe is 12×10¯⁶ K¯¹, the pipe extends by 0.024 mm
Data obtained from the question Original length (L₁) = 100 mmChange in temperature (ΔT) = 20 KCoefficient of expansion (α) = 12×10¯⁶ K¯¹Change in length (ΔL) =?How to determine the new diameter
α = ΔL / L₁ΔT
12×10¯⁶ = ΔL / (100 × 20)
12×10¯⁶ = ΔL / 2000
Cross multiply
ΔL = 12×10¯⁶ × 2000
ΔL = 0.024 mm
Learn more about linear expansion:
https://brainly.com/question/23207743
#SPJ1
how can geo thermal energy be used ?
Heating and Cooling Using Geothermal Heat, Natural Air Conditioning. Another use of this type of energy is natural cooling.Maintenance of Civil Works. Another direct application is to avoid the freezing of bridges, roads, or airports. .Thermal Waters. For the use of heat in hot springs from geothermal energy, deep waters with temperatures between 40 and 150 ° C are used.
What is the piece of information that is communicated using the senses?
A hockey puck is hit with a large force. The puck moves at a high speed as it slides over the ice.
What happens according to Newton’s first law of motion?
A. The puck gradually slows down because mass makes objects slow down.
B. The puck gradually slows down because friction would be acting on it.
C. The puck does not lose any speed because ice is a very slippery surface.
D. The puck does not lose any speed because once an object starts moving, the force of friction would no longer apply to it.
According to Newton's first law of motion, the puck gradually slows down because friction would be acting on it.
What is Newton's first law?Newton's first law of motion states that an object will remain at rest or move uniformly in a straight line unless acted upon by an external force.
According to this question, a hockey puck is hit with a large force. The puck moves at a high speed as it slides over the ice.
However, in accordance with the first law of motion proposed by Newton, the puck gradually slows down because friction would be acting on it.
Learn more about Newton's law at: https://brainly.com/question/974124
#SPJ1
Answer:B. The puck gradually slows down because friction would be acting on it.
Explanation: