1 s = 1,000 ms
2 s = 2,000 ms
3 s = 3,000 ms
.
.
10 s = 10,000 ms
20 s = 20,000 ms
30 s = 30,000 ms
.
.
.
100 s = 100,000 ms
200 s = 200,000 ms
300 s = 300,000 ms
310 s = 310,000 ms
320 s = 320,000 ms
.
.
.
350 s = 350,000 ms
360 s = 360,000 ms
370 s = 370,000 ms
.
.
.
What is the net force acting on the box?
0 285 N
0 185 N
SN
0 85 N
0 65 N
Answer:
the answer would be D 65N
Explanation:
just got it correct on EDG
What is the frequency in Hz of a wave that travels at 2,500 m/s with a wavelength of 100 m?
Answer:
f = 25 Hz
Explanation:
We know that :
[tex]v = f*d\\=> f = \frac{v}{d}[/tex] where f = frequency ; v = speed & d = wavelength
Here in the question ,
Speed = 2500 m/s
Wavelength = 100 m
Using the above formula ,
Frequency = [tex]\frac{2500}{100} = 25 Hz[/tex]
A large negatively charged object is placed on a wooden table. A neutral metallic ball rolls straight towards the object but stops before it touches it. A second neutral metallic ball rolls up along the path followed by the first ball, strikes the first ball driving it a bit closer to the negatively charged object and stops. After all balls have stopped rolling, the first ball is closer to the negatively charged object than is the second ball. At no time did either ball touch the charged object. Which statement is correct concerning the final charge on each ball
Answer:
the charge of each small sphere, which is + Q / 2
Explanation:
For this exercise we must use the fact that a charged object induces charges on nearby bodies
Induced charge comes from the fact that charges of the same sign repel and charges of different signs attract.
In this case the large, fixed ball with a -Q charge induces a positive charge in the nearest part and the negative charges are repelled to the furthest point, but the net charge on the metallic sphere remains zero. It should be emphasized that since the charges are of different signs, there is an attractive force between the two spheres.
This first metallic sphere now has a negative charge on the back, this charge induces a positive charge on the second sphere, as the charges are of a different sign, they attract each other, which is why the force is attractive.
When the first sphere stops the second sphere hits it, at this moment the charge of the two spheres is equal, therefore the induced charge in the two spheres is + Q. When the two spheres are separated, the charge on each of them is half, that is, the sphere has a charge + Q / 2 and the second sphere has a charge + Q / 2.
Therefore the first sphere is subjected to two forces: an attractive force with the large sphere of charge -Q and a repulsive force with the second sphere of charge + Q / 2.
So the first sphere must approach the big ball and the second sphere must move away from the big sphere.
This is the process of the movement of this exercise, unfortunately the statements with which to compare this process do not appear, but one of the most common questions of what is the charge of each small sphere, which is + Q / 2
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) W
Complete question is;
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) What is the amplitude of each wave
Answer:
A) Period = 4 s
B) Frequency = 0.25 Hz
C) Amplitude = 0.3 m
Explanation:
A) We are told that the distance it takes for the boat to travel from its highest to its lowest point is 2 s.
Thus, t = 2 s
Now, in waves, period (T) it the time between two successive waves.
This means that;
T = 2t
T = 2 × 2
T = 4 s
B) Also, the frequency(f) is given by the formula;
f = 1/T
f = 1/4
f = 0.25 Hz
C) We are given a vertical distance of 0.60 m from highest to lowest point of waves.
Now, amplitude is half of this distance.
Thus;
Amplitude(A) = 0.6/2
A = 0.3 m
How does the energy in matter affect the state?
Answer:
Because of melting and freezing a higher heat will make something a plasma or liquid by melting it. by freezing you can make a liquid or gas solid.
Explanation:
Scientific notation: Convert 7.1 x 10-3 to decimal notation.
Answer: hey
your answer is gonna be
71000.
Explanation:
Two point charges are on the x-axis. One charge, q1 = 10 nC, is located at the origin, and the othercharge, q2 = 18 nC, is located at x = 9.0 m. What is the force on q2?a) 20 nN in the positive x-directionb) 20 pN in the positive x-directionc) 20 nN in the negative x-directiond) 20 pN in the negative x-directione) 180 nN in the positive x-direction
Answer:
The correct option is A
Explanation:
Generally the force on [tex]q_2[/tex] is mathematically represented as
[tex]F_2 = \frac{ k * q_1 * q_2 }{ x^2}[/tex]
here k is the coulombs constant with value [tex]k = 9*10^{9}\ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex]
=> [tex]F_2 = \frac{ 9*10^{9} * 10*10^{-9} * 18*10^{-9} }{ 9^2}[/tex]
=> [tex]F_2 = 2*10^{-8} \ N[/tex]
=> [tex]F_2 = 20*10^{-9} \ N[/tex]
=> [tex]F_2 = 20nN[/tex]
The direction is in the positive x-axis because both charge are of the same polarity so the will repel hence [tex]q_2[/tex] will move toward the positive x-axis
What the differences between static and kinetic friction?
Answer:
Static friction prevents a stationary object from moving while kinetic or dynamic friction slows down a moving object.
Explanation:
Static Friction is the maximum force that must be overcome before a stationary object begins to move, while kinetic or dynamic friction is the maximum force that must be overcome for an object in motion to continue moving at a uniform velocity.
Static friction keeps a stationary object at rest, once the Force of Static friction is overcome, the Force of Kinetic friction is what slows down the moving object.
Ricardo finds an online site about the gas laws. The site shows the equation below for Charles’s law. What change would correct the error on the site? “Charles’s law” should read “Gay-Lussac’s law,” which explains changes in volume and temperature. The symbol for T2 should be smaller than for T1 because if volume increases, then temperature should decrease. Each T should be replaced by a P in the equation because Charles’s law describes changes in volume and pressure. The volume should be divided by temperature on each side of the equation.
Answer:
D. The volume should be divided by temperature on each side of the equation.
Explanation:
Charles's Law is [tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex].
Answer:
The volume should be divided by temperature on each side of the equation.
Explanation:
6. What is Mass????????????????
It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north
from the bus stop to the museum entrance. What is your displacement?
The direction of movement of the body or item is defined by velocity. Your total displacement will be 684 meters.
What is Velocity?The direction of movement of the body or item is defined by velocity. Speed is fundamentally a scalar number. Velocity is, in essence, a vector quantity. It is the pace at which distance changes. It is the displacement rate of change.
Given that It takes you 9.5 min to walk with an average velocity of 1.2 m/s to the north from the bus stop to the museum entrance.
Time = 9.5 minutes = 9.5 × 60 seconds = 570 seconds
Average Velocity = 1.2 m/s
Now, the displacement made by you can be written as,
Velocity = Displacement / Time
1.2 m/sec = Displacement / 570 seconds
Displacement = 1.2 m/sec × 570 seconds
Displacement = 684 meter
Hence, your total displacement will be 684 meters.
Learn more about Velocity here:
https://brainly.com/question/18084516
#SPJ2
Suppose a wheel with a tire mounted on it is rotating at the constant rate of 3.273.27 times a second. A tack is stuck in the tire at a distance of 0.365 m0.365 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: m/sm/s What is the tack's centripetal acceleration?
Answer:
The tangential speed is [tex]v = 7.5 m/s [/tex]
The centripetal acceleration is [tex]a = 154 \ m/s^2[/tex]
Explanation
Generally the angular velocity is mathematically represented as
[tex]w = e * \frac{ 2 \ pi \ rad }{s}[/tex]
substituting 3.27 rev/s for e we have that
[tex]w = 3.27 * \frac{ 2 \ pi \ rad }{s}[/tex]
=> [tex]w = 20.55 \ rad /s[/tex]
The tangential speed is mathematically represented as
[tex]v = w * r[/tex]
substituting 0.365 m for r we have that
[tex]v = 20.55 * 0.365 [/tex]
=> [tex]v = 7.5 m/s [/tex]
Generally the centripetal acceleration is mathematically represented as
[tex]a = \frac{v^2}{r}[/tex]
=> [tex]a = \frac{7.5^2}{ 0.365}[/tex]
=> [tex]a = 154 \ m/s^2[/tex]
Does the US use the metric system? Please Only Real Answers Like Yes Or No Or yes because...... no because...... Thank You
Answer:
No
Explanation: It is the only country that does not. Hope this helped :)
How does an electrometer differ from a voltmeter? What is meant by an electrical ground? What must you do before each measurement in this experiment and why?
Answer:
n an electrometer, it is built in such a way that its resistance in parallel is extremely high
Ground in a circuit is a reference point from which voltages are measured
all the instruments must be grounded and we must ground ourselves
Explanation:
When you build a voltmeter you have a resistance in parallel with the galvanometer, therefore when measuring the voltage of a circuit, so that there is no effect (load effect) by the voltmeter, a resistance must be much greater than the resistance where it is is measuring.
In an electrometer, it is built in such a way that its resistance in parallel is extremely high in the order of 10¹²Ω, so its load effect is very small and can be measured with high resistance mu
Electric ground in home and industrial installations is a protection system consisting of a metal piece connected to a buried ground electrode.
Ground in a circuit is a reference point from which voltages are measured and is common to all parts of the circuit
In an experiment where an electrometer is used, all the instruments must be grounded and we must ground ourselves, since it must be an instrument where very small voltages are measured at high impedances.
A satellite in outer space is moving at a constant velocity of 21.4 m/s in the y direction when one of its onboard thruster turns on, causing an acceleration of 0.250 m/s2 in the x direction. The acceleration lasts for 45.0 s, at which point the thruster turns off. (a) What is the magnitude of the satellite's velocity when the thruster turns off
Answer:
a) The magnitude of the satellite's velocity when the thruster turns off is approximately 24.177 meters per second.
b) The direction of the satellite's velocity when the thruster turns off is approximately 62.266º.
Explanation:
Statement is incomplete. The complete description is now described below:
A satellite in outer space is moving at a constant velocity of 21.4 m/s in the y direction when one of its onboard thruster turns on, causing an acceleration of 0.250 m/s2 in the x direction. The acceleration lasts for 45.0 s, at which point the thruster turns off.
(a) What is the magnitude of the satellite's velocity when the thruster turns off
(b) What is the direction of the satellite's velocity when the thruster turns off? Give your answer as an angle measured counterclockwise from the +x-axis. ° counterclockwise from the +x-axis
Let be x and y-directions orthogonal to each other and the satellite is accelerated uniformly from rest in the +x direction and moves at constant velocity in the +y direction. The velocity vector of the satellite ([tex]\vec{v}_{S}[/tex]), measured in meters per second, is:
[tex]\vec{v}_{S} = (v_{o,x}+a_{x}\cdot t)\,\hat{i}+v_{y}\,\hat{j}[/tex]
Where:
[tex]v_{o,x}[/tex] - Initial velocity in +x direction, measured in meters per second.
[tex]a_{x}[/tex] - Acceleration in +x direction, measured in meter per square second.
[tex]t[/tex] - Time, measured in seconds.
[tex]v_{y}[/tex] - Velocity in +y direction, measured in meters per second.
If we know that [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]a_{x} = 0.250\,\frac{m}{s^{2}}[/tex], [tex]t = 45\,s[/tex] and [tex]v_{y} = 21.4\,\frac{m}{s}[/tex], the final velocity of the satellite is:
[tex]\vec{v}_{S} = \left[0\,\frac{m}{s}+\left(0.250\,\frac{m}{s^{2}} \right)\cdot (45\,s) \right]\,\hat{i}+\left(21.4\,\frac{m}{s} \right)\,\hat{j}[/tex]
[tex]\vec{v_{S}} = 11.25\,\hat{i}+21.4\,\hat{j}\,\,\left[\frac{m}{s} \right][/tex]
a) The magnitud of the satellite's velocity can be found by the resource of the Pythagorean Theorem:
[tex]\|\vec {v}_{S}\| = \sqrt{\left(11.25\,\frac{m}{s} \right)^{2}+\left(21.4\,\frac{m}{s} \right)^{2}}[/tex]
[tex]\|\vec{v}_{S}\| \approx 24.177\,\frac{m}{s}[/tex]
The magnitude of the satellite's velocity when the thruster turns off is approximately 24.177 meters per second.
b) The direction of the satellite's velocity when the thruster turns off is determined with the help of trigonometric functions:
[tex]\tan \alpha = \frac{v_{y}}{v_{x}} = \frac{21.4\,\frac{m}{s} }{11.25\,\frac{m}{s} }[/tex]
[tex]\tan \alpha = 1.902[/tex]
[tex]\alpha = \tan^{-1}1.902[/tex]
[tex]\alpha \approx 62.266^{\circ}[/tex]
The direction of the satellite's velocity when the thruster turns off is approximately 62.266º.
Which wavelength of light is NOT absorbed by riboflavin?
Answer:
525 nm and 550nm
Explanation:
The absorption spectrum of any compound is a plot of absorption against wavelength. Sometimes, the absorption is plotted against frequency or wave number. This plot appears as humps. The peak of the highest hump is the wavelength of maximum absorption. The concentration of each solution may be indicated above the hump when the instrument is calibrated using different concentrations of the analyte.
The absorption spectrum of riboflavin indicates that its wavelength of maximum absorption is 450nm and it does not absorb at light 525 nm and 550nm wavelengths respectively.
6
Following an inelastic collision, what can kinetic energy be converted into? Check all that apply.
heat
impulse
momentum
potential energy
sound
Mark this and return
Save and Exit
Next
Submit
Answer:
Heat, potential energy, and sound.
Explanation:
Edgenuity says so
The characteristics of the inelastic shocks allow to find the correct answers of in which the kinetic energy can be transformed are:
Heat Potential energy Sound.
In a collision the total momentum of the system is conserved, this is an important principle of physics, we have two types of collisions:
Elastic. In this case the kinetic energy of the system is conserved. Inelastic. In this case the initial kinetic energy is not conserved.
In inelastic collision, part of the energy of the movement is transformed into potential energy of configuration of the system.
Let's analyze the different answers:
a) Heat.
True. Heat is a form of energy that, due to the change in the relative friction motion of bodies, is one of the greatest sources of transformation of energy into configuration power energy.
b) Impulse.
False. The impulse is the change of the momentum of the system and this is conserved, therefore the momentum is also conserved.
c) Momentum
False. Momentum is preserved in all crashes.
d) Potential energy.
True. Power energy is a configuration energy, therefore kinetic energy can be transformed into potential energy.
e) The sound.
True. Sound is a wave that carries energy, therefore kinetic energy can be transformed into traveling sound waves.
In conclusion, using the characteristics of inelastic shocks, we can find the correct answers that the kinetic energy can be transformed into are:
Heat Potential energy Sound.
Learn more here: brainly.com/question/24616147
Derrick crawls 4 feet south, and then turns east and crawls 6 feet.
What distance did he cover?
What was his displacement?
Displacement is a vector quantity. The distance and displacement of the given object are 10 ft and 7.07 ft respectively.
Distance:
It can be defined as the change in position of the object. It is a scalar quantity.
Displacement = 4+6
Displacement = 10 ft
Displacement:It can be defined as the vector change in position overall change in position.It is a vector quantityVector quantity is the quantities that have both magnitude and direction.[tex]\rm Dislacement =\sqrt { 4^2 +6^2}\\\\ \rm Dislacement = 7.07 ft[/tex]
Therefore, the distance and displacement of the given object are 10 ft and 7.07 ft respectively.
Learn more about Displacement:
https://brainly.com/question/10919017
Protons are launched with an initial speed 9550 m/s at 37° above the horizontal, into a region where a uniform vertical electric field is present. The protons hit a target at a horizontal distance 1.27 mm from the point where the protons are launched. Find the electric field, the time of flight, and the maximum height reached by the protons above the point where they were launched.
Answer:
E=720,5 N/C
H=0,24mm
Explanation:
HELP!!!
An arrow is shot into the air at an angle of 30.0 above the horizontal with a speed of 20.0 m/s. What are the x and y components of the
velocity of the arrow 1.0 s after it leaves the bowstring?
Answer:
Y(1s) = [tex]10\sqrt{3}[/tex] - 10.1
X(1s) = 10m/s
Explanation:
In annex I've done the explanation for the equations that I will just present here.
Assuming that the arrow stars from the position (0 ; 0) in the Cartesian Graphic, and with Xo and Yo the initial speeds:
[tex]Yo =\frac{\sqrt{3} }{2} . Vr\\Yo = \frac{\sqrt{3} }{2} . 20\\Yo = 10\sqrt{3} m/s \\Xo = \frac{1}{2} Vr\\Xo = 10m/s[/tex]
Ignoring friction with air, Xo = Xf
So, Xo is the same during all the movement.
X(1s) = 10m/s
For Yo is different. That component is suferring reductions from gravity.
We can find Yo(1s) with one the basic functions of cinematics:
Vf = Vo + at
Vf = Final Velocity
Vo = Start Velocity
a = aceleration - gravity (g) is negative here
t = time
Yf = Yo + gt
Yf = [tex]10\sqrt{3}[/tex] - 10.1
If you prefere, can be: Yf = 10. ([tex]\sqrt{3} - 1[/tex])
The various types of tree sloths share the honor of being the slowest-moving
mammals. An average tree sloth moves with a speed of 0.743 m/s. How long does it
take a sloth moving at this speed to travel 22.30 m?
Answer:
16.568 Minutes
Explanation:
Time = speed (m/s) x distance (m)
What would the American flag look like under a blue light?
Answer:
The flag will appear to be black.
Explanation:
This is because red is the only brighter color in the American flag, so when a blue light is shined, the red turns dark and then the flag looks just blank and black.
Answer:
As red light falls on a blue surface, it absorbs the red light and no light will be reflected back. Thus, the object appears to be black. When the flag is illuminated by red light, the red and white stripes of the flag will appear solid red, the stars will appear red, and the blue portion will appear black.
Part A
What is the magnitude of the momentum of a 0.0073-kg marble whose speed is 0.65 m/s?
Express your answer to two significant figures and include appropriate units.
Part B
What is the speed of a 0.136-kg baseball whose momentum has a magnitude of 3.14 kg⋅m/s?
Express your answer to two significant figures and include appropriate units.
Answer:
(A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
Explanation:
Given that,
Mass of marble = 0.0073 kg
Speed = 0.65 m/s
(A). We need to calculate the magnitude of the momentum of the marble
Using formula of momentum
[tex]p = mv[/tex]
Where, m = mass
v = velocity
Put the value into the formula
[tex]p=0.0073\times0.65[/tex]
[tex]p=0.004745\ kg m/s[/tex]
(B). Mass of baseball = 0.136 kg
Momentum of baseball = 3.14 kg m/s
We need to calculate the speed of baseball
Using formula of momentum
[tex]p=mv[/tex]
[tex]v=\dfrac{p}{m}[/tex]
Put the value into the formula
[tex]v=\dfrac{3.14}{0.136}[/tex]
[tex]v=23.0\ m/s[/tex]
Hence, (A). The magnitude of the momentum of the marble is 0.004745 kg m/s.
(B). The speed of baseball is 23.0 m/s
where do plants get the energy they need for photosynthesis
(A) leaves
(B) the sun
(C) sugars
(D) water
they get their energy from photosynthesis, so the answer would be (B) the sun
Father drove 176 km in 7 hours. For the first 92 km, he spent
for 4 hours. What was his average speed for the remaining
journey?
km/h
Answer:
28km/h
Explanation:
92km = 4 hours
176 - 92 = 84
84km = 3 hours
84/3 = 28
28km/h
Hopefully this helps you :)
pls mark brainlest ;)
Do you think a hurricane can be considered to be a heat machine? Why?
Answer:
No
Explanation:
Hurricanes always do not bring heat. For example, Hurricane Sandy brought snow.
How did oxygen get into the earths atmosphere in its early days? plz explain
Answer:
The answer is tiny organisms known as cyanobacteria, or blue-green algae. These microbes conduct photosynthesis: using sunshine, water and carbon dioxide to produce carbohydrates and, yes, oxygen. In fact, all the plants on Earth incorporate symbiotic cyanobacteria (known as chloroplasts) to do their photosynthesis for them down to this day.
Explanation:
A baseball pitcher's average fastball pitch speed is 98.6 mph. What is that speed in
m/s?
Answer:
44.078 m/s
Explanation:
convert 98.6 miles to meters then convert the hour to minutes and minutes to seconds
When a piece of paper is held with one face perpendicular to a uniform electric field the flux through it is 25 N .m2 /C. When the paper is turned 25° with respect to the field the flux through it is:_____.1. 02. 12 N .m2 /C3. 21 N .m2 /C4. 23 N .m2 /C5. 25 N .m2 /CB. A charged point particle is placed at the center of a spherical Gaussian surface. The electric flux is changed if:______.1. the sphere is replaced by a cube of the same volume2. the sphere is replaced by a cube of one-tenth the volume3. the point charge is moved off center (but still inside the original sphere)4. the point charge is moved to just outside the sphere5. a second point charge is placed just outside the sphereC. A charge of 0.8 × 10−9 C is placed at the center of a cube that measures 5 m along each edge. What is the electric flux through any 2 faces of the cube?
Answer:
1) 23 N.m²/C
2) The point charge is moved just outside the sphere
3) 30 N.m²/C
Explanation:
1) The flux through the field can be gotten by finding the dot product of the angle the later is turned, and the given uniform electric field.
25 * cos 25 =
25 * 0.9063 =
22.66 or approximately, 23 N.m²/C
2) The point charge is moved just outside the sphere
3) Using Gauss' Law, the electric flux through one face of the cube is given as Φ = Q / 6ε₀, thus,
Φ = 0.8*10^-9 / 6 * 8.85*10^-12
Φ = 0.8*10^-9 / 5.311*10^-11
Φ = 15 N.m²/C
And therefore, the flux through any 2 faces of the cube is 2 * 15 = 30 N.m²/C
What must be the acceleration of a train in order for it to stop from 12m/s in a distance of 541m?
Please help!!
Answer:
The acceleration of the train must be - 0.133 m/s²
Explanation:
A train in order for it to stop 12 m/s in a distance if 541 m
That means the initial velocity of the train is 12 m/s
Its final velocity is zero (stop)
The distance it covers is 541 m
P.S. This is part of the answer of another brainly user this is not my knowledge.
But Hope I helped you
Answer:
-0.133 m/s²
Explanation:
Given:
Δx = 541 m
v₀ = 12 m/s
v = 0 m/s
Find: a
v² = v₀² + 2aΔx
(0 m/s)² = (12 m/s)² + 2a (541 m)
a = -0.133 m/s²