The minimum and maximum size of EMT is 1/2 inch and 4 inches, respectively, as per NEC 358-2(A)(B). However, for special installations, larger sizes may be used.
The minimum and maximum size of EMT (Electrical Metallic Tubing) is typically 1/2 inch and 4 inches, respectively, except for special installations.There is no direct reference to section 358-2(A)(B) in the National Electric Code (NEC). However, Section 358.12(A)(1) specifies that the trade size of electrical metallic tubing (EMT) shall be from 1/2 inch to 4 inches in diameter. This is the general rule for EMT, with some exceptions for special installations, as noted in other sections of the NEC.
Learn more about Tubing here
https://brainly.in/question/47308006
#SPJ11
Describe two instances when memberwise assignment occurs.
Memberwise assignment occurs when one object is assigned to another object, and their member variables are copied over.
Here are two instances when this can happen:
1. When using a copy constructor: If a class has a copy constructor defined, memberwise assignment occurs when an object of that class is copied to create a new object. The member variables of the original object are copied over to the new object.
2. When using the assignment operator: If a class has an assignment operator defined, memberwise assignment occurs when one object of that class is assigned to another object of the same class. The member variables of the object on the right-hand side are copied over to the object on the left-hand side.
Memberwise assignment occurs when each member of an object or structure is assigned to its corresponding member in another object or structure. Instances when memberwise assignment occurs are:
When initializing a new object or structure using an existing one: In this case, the new object or structure is assigned values from the existing one, copying each member's value individually.
When updating the values of an existing object or structure: In this situation, memberwise assignment is used to change the values of an object or structure by assigning new values to its members, replacing the old values with the new ones.
To know more about Memberwise assignment, click here:
https://brainly.com/question/29990598
#SPJ11
Question89
One of the first actions an individual should take upon hearing an order for the evacuation of homes and businesses is turn off the
a. Main electric power switch
b. Outside gas valve
c. Property water supply valve
d. Public utility services to the building
Answer:
a
Explanation:
because bcd are incorrect
The default equals implementation of class Object determines:a. whether two references refer to the same object in memory.b. whether two references have the same type.c. whether two objects have the same instance variables.d. whether two objects have the same instance variable values.
The default equals implementation of class Object determines whether two references refer to the same object in memory (option a). In Java, the equals method is used to compare objects for equality.
The Object class provides a default implementation of the equals method that simply compares the memory addresses of two objects. In other words, it checks whether two references refer to the same object in memory. However, this default behavior is often not sufficient for comparing objects based on their contents, and so many classes in Java override the equals method to provide more specific comparison logic. For example, a String object compares its contents, rather than just checking for reference equality.
Learn more about class Object here:
https://brainly.com/question/13233147
#SPJ11
The data are full of missing, misplaced, or duplicate data, which the data analyst needs to remove.
Which process can this data analyst use to remove such data?
The data analyst can use the data cleaning process to remove missing, misplaced, or duplicate data from the dataset.
This process involves identifying and correcting any errors or inconsistencies in the data to ensure that it is accurate and reliable for analysis. The analyst can use various techniques and tools such as data profiling, data validation, and data transformation to remove unwanted data from the dataset. By cleaning the data, the analyst can improve the quality of the data and make it easier to analyze and interpret.
To know more about data cleaning, follow the link:
brainly.com/question/13085801
#SPJ11
The process that the data analyst can use to remove missing, misplaced, or duplicate data is called data cleaning or data scrubbing.
This involves identifying and correcting or removing errors, inconsistencies, and inaccuracies in the data to ensure its quality and reliability for analysis. The data analyst can use various tools and techniques, such as data profiling, data validation, data imputation, and data deduplication, to clean the data and prepare it for analysis.
Learn more about data analyst: https://brainly.com/question/30165861
#SPJ11
Question 48
Lead-based paint may be used for:
a. exterior house paints
b. painting toys
c. painting bridges
d. painting special furniture
Answer:
d.painting special furniture.
Explanation:
Fun fact!
In the 1960s, lead was used to make some kinds of paint - for windows, doors and other woodwork as well as for some metal items, like radiators.
Assume there is a class named Pet. Write the prototype for a member function of Pet that overloads the = operator.
The prototype for a member function of Pet that overloads the = operator would be: Pet& operator=(const Pet& other);
This function takes a reference to a constant Pet object called "other" as an argument and returns a reference to a Pet object. It allows for assigning one Pet object to another using the = operator.
The prototype for the member function of the Pet class that overloads the = operator would look like this:class Pet {public: // Constructor, destructor, and other member functions... Pet& operator=(const Pet& other);};This function overloads the assignment operator (=) and takes a reference to a constant Pet object other as its parameter. The function returns a reference to the Pet object that has been assigned the new value. The purpose of overloading the = operator is to allow for assignment of one Pet object to another. When the = operator is used with two Pet objects, the function will be called and it will copy the data members of the other Pet object to the current Pet object. The function should also handle self-assignment, which occurs when the object is assigned to itself.
Learn more about prototype here-
https://brainly.com/question/27896974
#SPJ11
(376-30) Wireways where run horizontally shall be supported at each end and the distance between supports shall not exceed _____ feet.
In accordance with the National Electrical Code (NEC), when wireways are run horizontally, they must be supported at each end and the distance between supports should not exceed 5 feet.
Section 450.3 of the NEC specifies rules for the protection of transformers and related equipment, with the ultimate objective of guaranteeing safety and reducing the possibility of electrical dangers.
The specifications for the protection of transformers and related equipment are set forth in Section 450.3 of the National Electrical Code (NEC). These regulations' main goal is to protect safety by reducing the possibility of electrical dangers like fire, electric shock, and equipment damage.
To prevent electrical overloads that could damage equipment or start fires, the NEC requires that transformers and related equipment be protected by overcurrent devices, such as fuses or circuit breakers. The code also outlines the size, style, and kind of wiring that must be utilised, as well as the grounding and bonding requirements.
Learn more about National Electrical Code (NEC) here
https://brainly.com/question/30757813
#SPJ11
What are the lengths of typical operating system scheduling quantum's?
The lengths of typical operating system scheduling quanta, or time slices, usually range from 10 to 100 milliseconds. This duration is chosen to balance the need for efficient context-switching and maintaining good interactive responsiveness.
The length of a typical operating system scheduling quantum can vary depending on the specific operating system and its configuration. In general, a scheduling quantum refers to the amount of time that a process is allowed to run on the CPU before it is preempted and another process is given the opportunity to run. The length of a scheduling quantum can be set by the operating system and is typically measured in milliseconds.
Some operating systems may have a default scheduling quantum of 10-20 milliseconds, while others may have a longer or shorter default value. The length of the scheduling quantum can also be adjusted by system administrators or users depending on their specific needs and preferences. In some cases, shorter scheduling quanta may be desirable for real-time applications that require quick response times, while longer scheduling quanta may be more appropriate for non-real-time applications that can tolerate longer periods of CPU time. Overall, the length of a typical operating system scheduling quantum can vary depending on the specific system and its intended use.Know more about the operating system
https://brainly.com/question/22811693
#SPJ11
(300-5(F)) Backfill used for underground wiring must not damage the wiring method, contribute to the corrosion of the raceway or prevent compaction of the fill.(True/False)
True. 300-5(F) of the National Electric Code (NEC) specifies the requirements for backfill used for underground wiring.
According to this section, the backfill material used must not damage the wiring method, contribute to the corrosion of the raceway, or prevent compaction of the fill. This is important to ensure the long-term safety and reliability of the electrical system, as damage or corrosion to the wiring method can increase the risk of electrical hazards, such as shocks, fires, or explosions. By using an appropriate backfill material that meets the NEC requirements, the wiring method can be protected from damage and corrosion, and the overall safety and reliability of the electrical system can be maintained.
Learn more about underground wiring here:
https://brainly.com/question/27981910
#SPJ11
A programmer-defined constructor that has no arguments is called a(n) ________.
a. a. empty constructor.
b. b. no-argument constructor.
c. c. default constructor.
d. d. null constructor.
c. default constructor.In object-oriented programming, a constructor is a special method that is called when an object is created, used to initialize the object's state or set its properties.
A default constructor is a constructor in object-oriented programming that is automatically created by the compiler when no other constructors are explicitly defined by the programmer. The default constructor has no arguments and initializes the object's member variables to default values. For example, numeric types are initialized to 0, booleans to false, and object references to null. The default constructor can be explicitly defined by the programmer, and may perform additional initialization of the object's state or set its properties. The default constructor is useful when creating objects with default values, or when subclassing a class with no constructors defined.
Learn more about default constructor here:
https://brainly.com/question/31393839
#SPJ11
What is an important function of the physical layer of the OSI model?
The physical layer of the OSI model is responsible for the transmission of raw data bits over a physical medium, such as copper wires or fiber-optic cables. Its main function is to establish and maintain a physical connection between devices on a network and to ensure that the data is transmitted reliably and accurately.
The physical layer also handles the encoding and decoding of signals, as well as the modulation and demodulation of the data stream. Overall, the physical layer plays a crucial role in ensuring the successful transmission of data across a network.An important function of the physical layer of the OSI model is to establish, maintain, and terminate the physical connections for data transmission between devices. This includes managing data encoding, signaling, and synchronization for effective communication over a network.
Learn more about transmission here
https://brainly.in/question/2716268
#SPJ11
_________ is being pioneered by Yipes.com.
a. Active fibrous networking
b. The Abilene network
c. CA*Net3
d. Ethernet to the home
e. Next Generation Internet
Ethernet to the home is being pioneered by Yipes.com.
Yipes.com pioneered Ethernet to the home, which refers to the delivery of Ethernet-based broadband internet services directly to residential homes. It involves the installation of Ethernet cables that connect to a home's network interface device, enabling high-speed internet access for multiple devices within the home. Yipes.com was a pioneering company in the Ethernet over Copper (EoC) technology space, which facilitated the delivery of high-speed internet access over existing copper telephone lines.
Learn more about network here-
https://brainly.com/question/13102717
#SPJ11
When determining the specification rate for 52-28 tack you do what?
the rate in gallons per square yard (GSY) based on the surface conditions and the type of application equipment being used.
The quantity of tack coat material that must be applied to a pavement surface is described by the specification rate for 52-28 tack. The state of the paved surface, the kind of surface that will be overlaid, and the anticipated traffic volume must all be taken into account when determining the specification rate. The specification rate is sometimes expressed in terms of the volume of tack material per square yard of the pavement surface. To maintain adequate adhesion between the pavement layers and avoid delamination or slippage, the required amount of tack material must be applied.
learn more about application equipment here:
https://brainly.com/question/30891440
#SPJ11
Decribe one cycle of a sine wave. One cycle goes from the zero crossing through a positive peak, then through zero to a negative peak and back to the zero crossings.
A sine wave is a type of waveform that oscillates smoothly between positive and negative values over time. One complete cycle of a sine wave is defined as the complete journey from one zero crossing to the next, including one positive peak and one negative peak.
At the zero crossing, the waveform crosses the horizontal axis and changes direction from positive to negative or vice versa. The positive peak represents the highest value of the waveform during the cycle, while the negative peak represents the lowest value. After reaching the negative peak, the waveform then returns to the zero crossing, completing the cycle. This process repeats continuously, creating a periodic waveform.
Learn more about oscillates here
https://brainly.com/question/30111348
#SPJ11
PG 76-22 (PMA) is especially good at what?
Metals are particularly well-protected against corrosion by PG 76-22 (PMA). It is a high-performance coating used in tough settings to stop rust and corrosion .
The polyurethane coating known as PG 76-22 (PMA) is renowned for its superior corrosion prevention capabilities. It works especially well in areas where metal is subjected to hostile elements including chemicals, sea water, and extremely high or low temperatures. By forming a barrier between the metal and its surroundings, the coating keeps moisture and other corrosive elements from damaging the metal's surface. This helps stop rust and corrosion, which over time can degrade metal equipment and structures. In sectors including oil and gas, marine, and transportation where metal structures and equipment are subject to extreme environments and require corrosion protection, PG 76-22 (PMA) is frequently utilised.
learn more about coating here:
https://brainly.com/question/28735444
#SPJ11
Q8) a) Why was TCP designed to be complex?
TCP, or Transmission Control Protocol, was designed to be complex because it needed to be a reliable and efficient way of transmitting data over networks.
In the early days of networking, there were many different types of networks with varying degrees of reliability, and TCP needed to be able to adapt to different types of networks and handle errors and congestion.
know more about the Transmission Control Protocol
https://brainly.com/question/14219758
#SPJ11
What are PG binders tested for low temperature wise?
"PG binders are tested for low-temperature susceptibility, or their ability to resist cracking and deformation in cold weather conditions."
PG (Performance Grade) binders are used in the construction of asphalt pavements to improve their durability and resistance to deformation over time. These binders are derived from crude oil and are classified based on their viscosity and temperature susceptibility. The low-temperature susceptibility of PG binders is determined by testing them under controlled conditions of cooling and deformation. This test is known as the Bending Beam Rheometer (BBR) test and it measures the ability of the binder to resist cracking and deformation at low temperatures. The test results are used to classify PG binders into different grades based on their low-temperature performance. By selecting the appropriate grade of PG binder for a given location and climate, engineers can ensure that asphalt pavements will perform well under cold weather conditions and provide safe and reliable driving surfaces for motorists.
Learn more about PG binders here:
https://brainly.com/question/26138936
#SPJ11
No parts of cord connection luminaries (fixtures), hanging luminaries, lighting track, pendants, or ceiling suspended (paddle) fans shall be located within a zone measured _______ feet horizontally and ______ feet vertically from the top of the bath tub rim or shower stall threshold.
410.10(d)
No parts of cord connection luminaries (fixtures), hanging luminaries, lighting track, pendants, or ceiling suspended (paddle) fans shall be located within a zone measured 3 feet horizontally and 8 feet vertically from the top of the bath tub rim or shower stall threshold. 410.10(d)
According to section 410.10(d) of the electrical code, no parts of cord connection luminaries (fixtures), hanging luminaries, lighting track, pendants, or ceiling suspended (paddle) fans shall be located within a zone measured 3 feet horizontally and 8 feet vertically from the top of the bath tub rim or shower stall threshold. This is to ensure that there is no risk of electrical shock or fire hazards due to proximity to water sources. It is important to follow these guidelines for safety reasons.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.
learn more about luminaries here:
https://brainly.com/question/27632096
#SPJ11
What is the purpose of the network security accounting function?
Maintaining an accurate and up-to-date record of network usage, network security accounting helps to identify potential security threats and vulnerabilities, and allows for timely and effective response to any security incidents that may occur.
The purpose of the network security accounting function is to track and monitor the usage of network resources and ensure that they are being used in a secure and appropriate manner. This function helps to detect and prevent unauthorized access or misuse of network resources, and provides a way to audit network activity for compliance and risk management purposes.
Secure Wi-Fi networks and VPNs use an encryption to secure data transferred over a network.
In the use of a VPN, one has their internet traffic been encrypted, so no there is no intercept of one's network by public Wi-Fi.
Note therefore that VPN secures your Wi-Fi networks and other connection through the use of encryption in all places and thus one do not need to think about external protection.
Learn more about network security here
https://brainly.com/question/12439896
#SPJ11
If a back-arc basin is associated with a volcanic island arc, what tends to develop there?
A) Long, linear sea
B) Rift valley
C) Wide continental shelf
D) Submarine trench
If a back-arc basin is associated with a volcanic island arc, it tends to develop a A) long, linear sea. In the case of a back-arc basin associated with a volcanic island arc, the volcanic activity in the arc will likely lead to the deposition of volcanic material in the basin. Over time, this material can accumulate to form a long, linear sea within the basin.
When a back-arc basin is associated with a volcanic island arc, a long, linear sea tends to develop there. This occurs because the back-arc basin is a region between the volcanic island arc and the continental crust where oceanic crust is being stretched and thinned due to tectonic forces. This stretching leads to the formation of a long, linear sea as the oceanic crust pulls apart and new oceanic crust forms in the basin.
A back-arc basin is a geologic basin that forms behind a subduction zone, typically located parallel to an associated volcanic island arc. These basins are characterized by extensional tectonic forces and are often associated with volcanic activity.
Learn more about deposition here:
brainly.com/question/18572321
#SPJ11
Hi! The answer to the question: "If a back-arc basin is associated with a volcanic island arc, what tends to develop there?"
If a back-arc basin is associated with a volcanic island arc, what tends to develop there is:
A) Long, linear sea
Learn more about back-arc: https://brainly.com/question/28108430
#SPJ11
T/F: A database management system (DBMS) serves as an interface between an application program and a database.
True. A database management system (DBMS) serves as an interface between an application program and a database.
A database management system (DBMS) is a piece of software that lets users define, develop, keep up with, and manage database access. By giving users a mechanism to access and change the data stored in the database without needing to be aware of the specifics of how the data is stored or organized, it acts as an interface between an application program and a database. Data management tools and services, such as data storage, retrieval, security, and integrity, are offered by the DBMS. Additionally, it gives users a mechanism to specify the connections and data structures within the database. By submitting requests for data or modifications to the database, the application program communicates with the DBMS. The DBMS handles these queries and either confirms that the modifications have been performed or returns the required data. Data consistency, security, and dependability are all aided by the division of duties between the application program and the database management system (DBMS).
learn more about DBMS here:
https://brainly.com/question/30757461
#SPJ11
(310-106(C)) Where installed in raceways, conductors No. _____ and larger shall be stranded.
Based on the National Electrical Code (NEC), conductors No. 8 and larger shall be stranded when installed in raceways.
According to the National Electrical Code (NEC) in section 310-106(C), conductors that are size No. 8 and larger shall be stranded when they are installed in raceways.
This requirement for stranded conductors is intended to ensure that the conductors are flexible enough to be pulled through the raceway without breaking or damaging the insulation.
The NEC provides specific guidelines for conductor stranding based on the size of the conductor and the type of installation, so it's important to consult the code when selecting and installing conductors in raceways.
In general, however, stranded conductors are preferred for their flexibility and resistance to fatigue and breakage over time.
Know more about the National Electrical Code (NEC)
https://brainly.com/question/31389063
#SPJ11
Programmed counters can A. Count upB. CountdownC. be combined to count up and down.d. all of these.
Programmed counters are electronic devices used to count and record events or actions. They are commonly used in various applications such as manufacturing, automation, and data logging. These devices can be programmed to count up, countdown or even combine to count up and down.
option D is the correct answer
Counting up is the most common use of programmed counters. It starts from zero and increments each time an event occurs. For example, in a manufacturing plant, a programmed counter can be used to count the number of units produced or a traffic light can be programmed to count the number of vehicles passing through an intersection.Counting down is another function of programmed counters. It starts from a preset value and decrements each time an event occurs until it reaches zero. Countdown programmed counters are commonly used in various applications such as timers, alarm systems, and process control systems.Programmed counters can also be combined to count up and down. This means that the counter can count up to a preset value and then countdown to zero. For example, a programmed counter can be used to count the number of cycles of an operation, and once the preset value is reached, it can countdown to zero, indicating the completion of the operation.In conclusion, programmed counters are versatile electronic devices that can count up, countdown or even combine to count up and down. These counters have various applications and are useful in many different industries. Understanding the capabilities of programmed counters is important when choosing the right one for your specific needs.For such more question on automation
https://brainly.com/question/30088157
#SPJ11
How can late deliveries of materials or delays in essential services create supply chain​ disruptions?
Late deliveries of materials or delays in essential services can create supply chain disruptions by causing bottlenecks, affecting production schedules, and ultimately leading to reduced efficiency and increased costs.
Late deliveries of materials or delays in essential services can create supply chain disruptions by causing a ripple effect throughout the chain. If a crucial material or service is delayed, it can hold up production or transportation of goods, which can then delay delivery to customers. This delay can cause frustration and dissatisfaction among customers, leading to potential loss of business. Additionally, delays can lead to increased costs for companies due to overtime pay or rush shipping charges to make up for lost time. Ultimately, these disruptions can have a negative impact on a company's reputation and bottom line.
Learn more about business here-
https://brainly.com/question/15826604
#SPJ11
Which transportation mode provides high capacity and low​ costs?
The transportation mode that provides high capacity and low costs is typically rail transport, such as trains. Rail transport can carry large volumes of passengers or cargo over long distances, making it an efficient and cost-effective option.
With a fully loaded coal unit train weighing 23,000 tonnes, rail is the land transportation method with the maximum capacity. Rail transportation is another mode that can offer high capacity and low costs, particularly for bulk commodities like grains, ores, and chemicals. Trains can transport large volumes of goods over long distances, often at lower fuel costs than trucks. However, trains may be limited by their fixed routes and schedules, and may not be suitable for more flexible or time-sensitive shipments.
Learn more about cargo here-
https://brainly.com/question/31080082
#SPJ11
RES instructions are used with:a . TOF timersb. TON timersC. RTO timersd. all of these
The RES (Reset) instruction is typically used with TON (Timer On-Delay) and TOF (Timer Off-Delay) timers.
The RES instruction is used to reset the accumulated value of a timer, which is the value that the timer has counted up to since it was last reset. The RES instruction is executed, the timer is reset to zero, and the timer's output coil is turned off.
The TON and TOF timers both have an accumulated value that is used to determine when the timer's output coil should be turned on or off.
By using the RES instruction to reset the accumulated value of a timer, you can restart the timer and ensure that it will operate correctly in the next cycle of the program.
The RTO (Retentive Timer On) timer is a special type of timer that retains its accumulated value even if the power to the PLC is turned off.
The RES instruction can also be used with RTO timers to reset their accumulated value, but this is typically only done in certain situations where it is necessary to synchronize the timer with other elements of the program.
RES instructions are used with is (b) TON timers and (a) TOF timers.
For similar questions on instruction
https://brainly.com/question/31473841
#SPJ11
Security-in-depth is a security concept that calls for the systematic use of physical security measures in levels or steps to create different layers of protection. True or False?
True. Security-in-depth is a concept that calls for the systematic use of physical security measures in levels or steps to create different layers of protection. This approach ensures a more comprehensive and effective security system.
True. Security-in-depth is a systematic approach that involves implementing physical security measures in multiple layers or steps to provide comprehensive protection against various types of threats. Each layer of security measures provides additional protection, making it more difficult for attackers to penetrate the system.
SIDs can be used by any organization that wishes to protect its equipment, materials, data, information or personnel from damage or theft and to control its movement on the spot. The practice of SID has existed for centuries. Ditches, suspension bridges, outer walls, inner walls, watchtowers, etc. Imagine a fort that has - all this provides multi-layered security against infiltration and escaping with valuables.
Today, the use of physical barriers along with electronic systems, and electronic and security processes is a requirement to complete the SID. These integrated strategies will help prevent or stop and eliminate threats to and from assets. Multiple layers in an effective SID plan will also enable proactive and rapid response to threats.
Learn more about Security in depth:
brainly.com/question/29333111
#SPJ11
Question 65 Marks: 1 In a dry food storage room, the artificial lighting should provide a minimum ofChoose one answer. a. 10-foot candles b. 50-foot candles c. 100-foot candles d. 3-foot candles
b. 50-foot candles. In a dry food storage room, it is important to have adequate lighting for safety and efficiency purposes. The recommended minimum level of artificial lighting in such a room is 50-foot candles.
Artificial lighting refers to the use of light sources that are created by humans, rather than occurring naturally. These sources of light include incandescent bulbs, fluorescent lamps, and LED lights.
Artificial lighting is used in a wide range of settings, from homes and offices to public spaces such as stadiums and streets. It plays a critical role in modern society, providing illumination for activities that take place after dark or in areas with limited natural light.
However, the use of artificial lighting can also have negative effects on human health and the environment. Overexposure to certain types of artificial lighting can disrupt natural sleep patterns, and the energy consumption required to power artificial lighting can contribute to greenhouse gas emissions and other environmental impacts.
As such, the development of more efficient and sustainable lighting technologies is an important area of research and innovation.
Learn more about Artificial here:
https://brainly.com/question/29769915
#SPJ11
A RES (reset) instruction must be used zero the accumulated value in an RTO timer. true/false
The statement "A RES (reset) instruction must be used zero the accumulated value in an RTO timer. " given is false because a CLR (Clear) instruction, not a RES (Reset) instruction, should be used to zero the accumulated value in an RTO timer.
An RTO (Retentive Timer On-Delay) timer is a type of timer that retains its accumulated value even after the power is turned off, and resumes timing from where it left off when the power is turned back on.
To zero the accumulated value in an RTO timer, a CLR (Clear) instruction should be used instead of a RES (Reset) instruction. The CLR instruction clears the accumulated value of the timer to zero, while the RES instruction simply pauses the timer without clearing its accumulated value.
You can learn more about RES (reset) instruction at
https://brainly.com/question/31568319
#SPJ11
CCTV systems consist of sensors, control units, transmission lines, and monitor units. True or False?
True, CCTV systems consist of sensors, control units, transmission lines, and monitor units. These components work together to capture, transmit, and display video footage for security purposes.
The sensors are the cameras that capture video footage of the area under surveillance. The control units are responsible for processing and managing the video data collected by the sensors. The transmission lines are used to transmit the video data from the sensors to the control units. Finally, the monitor units display the video data in real-time, allowing operators to monitor the area under surveillance. Overall, these components work together to provide an effective means of surveillance and security monitoring for a wide range of applications, from public spaces and commercial premises to private homes and residential communities.
Learn more about CCTV here-
https://brainly.com/question/26407408
#SPJ11