Answer:
In this problem, we can use the concept of acid-base titration to determine the molarity of the Sr(OH)2 solution. The balanced chemical equation for the reaction between H3PO4 and Sr(OH)2 is:
3H3PO4 + Sr(OH)2 → Sr(H2PO4)2 + 2H2O
From the equation, we can see that 3 moles of H3PO4 react with 1 mole of Sr(OH)2. Therefore, the number of moles of H3PO4 in the solution is:
moles of H3PO4 = Molarity × Volume = 8.5 M × 0.070 L = 0.595 moles
Since 3 moles of H3PO4 react with 1 mole of Sr(OH)2, the number of moles of Sr(OH)2 in the solution is:
moles of Sr(OH)2 = (1/3) × 0.595 moles = 0.1983 moles
The volume of the Sr(OH)2 solution is 40 mL, or 0.040 L. Therefore, the molarity of the Sr(OH)2 solution is:
Molarity = moles of Sr(OH)2 / Volume of solution = 0.1983 moles / 0.040 L = 4.96 M
Therefore, the molarity of the Sr(OH)2 solution is 4.96 M.
when you tip a syrup bottle upside down, it takes a long time for the syrup to move down. explain this using the ideas of viscosity, adhesion and cohesion
The syrup moves down the bottle slowly when it is turned upside down as a result of the high viscosity, cohesion, and stickiness.
Gravity pulls the syrup downhill when the syrup bottle is turned on its side. The syrup does not, however, readily flow out of the bottle due to its high viscosity.
It is challenging for the syrup molecules to slip past one another and flow out of the bottle due to the high cohesiveness between them. Furthermore, it is challenging for the syrup to separate from the bottle and flow out due to the high adhesion between the molecules of the syrup and the surface of the bottle.
The ideas of viscosity, adhesion, and cohesion can be used to explain the syrup's gradual descent down the bottle when it is turned upside down.
The term "viscosity" describes a fluid's reluctance to flow. Syrup has a high flow resistance since it is a highly viscous liquid. Cohesion is the attraction of the same molecules, whereas adhesion is the attraction of distinct molecules.
Syrup's molecules are highly attracted to one another and to the surfaces of the bottle, resulting in high cohesion and adhesion, respectively.
learn more about viscosity here
https://brainly.com/question/2568610
#SPJ1
The complete conversion of three moles of glucose by aerobic fermentation yields how many moles of acetic acid? A. 1. B. 2. C. 3. D. 6.
The complete conversion of three moles of glucose by aerobic fermentation yields 6 moles of acetic acid.
Generally, aerobic fermentation or aerobic glycolysis is defined as a metabolic process by which cells metabolize sugars via the process of fermentation in the presence of oxygen and occurs through the repression of normal respiratory metabolism. This method is referred to as the Crabtree effect in yeast and also it is a part of the Warburg effect in tumor cells.
Generally, Reaction 1 of aerobic fermentation shows that 1 mole of glucose is converted to 2 moles of ethanol. And those 2 moles of ethanol are then converted in the Reaction 2 of aerobic fermentation into 2 moles of acetic acid. Hence, the complete conversion of glucose yields two acetic acid molecules per glucose molecule. Also, given that the ratio, when completely converted, three moles of glucose will yield six moles of acetic acid.
Learn more about aerobic fermentation from the link given below.
https://brainly.com/question/3928558
#SPJ4
when you pour a carbonated drink (e.g. beer, soda) small bubbles of carbon dioxide form because the thermodynamic pressure has been been reduced and the liquid is now super saturated with carbon dioxide gas. (a) what is the pressure inside the bubble as a function of the bubble size? (b) how many molecules are inside the bubble? (c) if the droplet is very small or very large, do the equations you derived in the first two parts still apply?
(a) The pressure inside the bubble as a function of the bubble size can be calculated using the Laplace-Young equation,
which relates the pressure difference across the bubble wall to the curvature of the bubble. As the bubble size decreases, the pressure inside the bubble increases.
(b) The number of molecules inside the bubble depends on the size of the bubble and the concentration of carbon dioxide in the liquid. However, we can estimate the number of molecules using the ideal gas law, which relates the number of molecules to the pressure, volume, and temperature.
(c) The equations derived in parts (a) and (b) still apply for small bubbles, but for very large bubbles, the pressure inside the bubble may approach atmospheric pressure, and the number of molecules inside the bubble may become difficult to estimate accurately.
To know more about concentrations click here
brainly.com/question/29072206
#SPJ11
Is cobalt-60, used in the treatment of cancer, more likely to be used in external radiotherapy or internal radiotherapy? Use the information in the table to explain your answer.
Cobalt-60 is more likely to be used in external radiotherapy than in internal radiotherapy for the treatment of cancer.
What is Cobalt - 60?Using a machine like a linear accelerator, external radiotherapy involves projecting high-energy radiation beams towards the tumor from outside the body. Cobalt-60 is one of the radiation sources that can be used to produce these beams.
The cobalt-60 source is housed in a device called a teletherapy unit that emits radiation beams in a precise and controlled manner. This allows the radiation to be aimed specifically at the tumor while minimizing exposure to nearby healthy tissues.
Learn more about Cobalt - 60:https://brainly.com/question/14253921
#SPJ1
any reaction that release 265 kcal of energy can be classified as . group of answer choices exothermic endothermic reduction activated oxidation
Any reaction that releases 265 kcal of energy can be classified as exothermic, which means that it releases energy in the form of heat.
This release of energy is typically the result of an oxidation reaction, where a substance loses electrons and becomes oxidized, while another substance gains electrons and becomes reduced. The process of oxidation can be a major source of energy in biological systems, such as during cellular respiration, where glucose is oxidized to release energy that is used by cells to carry out various functions.
A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. This is because exothermic reactions involve the release of energy, whereas endothermic reactions absorb energy. Oxidation and reduction are related to the transfer of electrons, and activation refers to the energy required for a reaction to proceed.
To know more about reduction click here
brainly.com/question/30281969
#SPJ11
Any reaction that releases 265 kcal of energy can be classified as an exothermic reaction. Exothermic reactions release energy in the form of heat, light or sound, while endothermic reactions absorb energy from the surroundings.
A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. In an exothermic reaction, energy is released in the form of heat, resulting in a net decrease in the system's total energy.
Reduction and oxidation are chemical processes that involve the transfer of electrons between molecules, but they do not necessarily involve the release or absorption of energy. Activation energy is the energy required to start a chemical reaction, but it does not determine whether a reaction is exothermic or endothermic.
To know more about Exothermic reactions :
https://brainly.com/question/28546817
#SPJ11
Question 104
The final rinse water temperature of a heat sanitizing warewashing machine should cause the surface of the dishes and utensils to reach which temp?
a. 180F
b. 160F
c. 175F
d. 210F
The right response is a. 180F. In order to guarantee that the surface of the dishes and utensils reaches a temperature high enough to properly sanitise them, the final rinse water temperature of a heat sanitising warewashing machine should be at least 180F (82C). This is based on the FDA Food Code's criteria.
Water used to rinse or clean items like dishes or clothing is referred to as rinse water. To get rid of any last bits of dirt, soap, or other cleaning agents from the item being cleaned, it is frequently used as the last step in a cleaning procedure. Depending on the item being cleaned and the cleaning product being used, the rinse water might be either cold or warm. Rinse water can occasionally be recycled, such as when washing many loads of dishes or clothing, but it must still be sufficiently clean to be effective. It's crucial to properly dispose of wasted rinse water to prevent water sources from being contaminated.
Learn more about Rinse here:
https://brainly.com/question/6677548
#SPJ11
Which device serves the same function as the packing?
a.) Inline suction gland
b.) Packing gland
c.) Mechanical seal
d.) Lantern seal
The device that serves the same function as the packing is mechanical seal . Option (c) is correct.
Packing is the most common form of sealing used in controlling devices. A mechanical seal is considered as a method in which fluid is contained in a vessel for example: pumps and mixers, where one rotating shaft passes through one stationary housing. Mechanical seal is of comparatively low cost. These kind of seals lasts longer than packing.
Therefore, mechanical seals are generally preferred over the commonly used traditional packing seals in applications which controls or prevents leakage problems .Some other advantages of mechanical seals are that these seals are more durable and they use multiple sealing points in order to eliminate any kind of leakage.
Thus, the correct option is (c)
To know more about packing seal here
https://brainly.com/question/17404727
#SPJ4
3.1. If the primary concern for a structure is fire resistance, one should use A. post and beam framing. B. heavy timber framing. C. platform framing.
D. balloon framing.
If the primary concern for a structure is fire resistance, one should use B.
Answer - If the primary concern for a structure is fire resistance, one should use heavy timber framing. This type of framing is made up of large, solid wood members that can withstand high temperatures and remain stable in case of a fire. that have a slower burn rate and better fire resistance compared to other framing techniques.Post and beam framing, platform framing, and balloon framing do not offer the same level of fire resistance as heavy timber framing.
to know more about fire resistance, click on this -
brainly.com/question/11471571
#SPJ11
Why must NaCl and KBr crystals that are used in cell holders in IR spectroscopy kept away from aqueous solutions?
NaCl and KBr crystals that are used in cell holders in IR spectroscopy should be kept away from aqueous solutions because it will be evaporated while its spectrum is being obtained.
Generally Infrared Spectroscopy is defined as the analysis of infrared light interacting with a molecule. Basically, this spectroscopy can be observed in three ways by measuring absorption, emission and reflection. So, the main use of this technique is found in the organic and inorganic chemistry. IR spectroscopy is basically used by chemists to determine functional groups present in the molecules.
Basically, volatile liquid can't be prepared with this method, because volatile liquid gets evaporated while its spectrum is being obtained. For instance, if the liquid sample is toxic or smelly, we should not use this method. Therefore, NaCl and KBr are dissolved into water, and thus they can't be used for aqueous samples.
Learn more about IR spectroscopy from the link given below.
https://brainly.com/question/28523860
#SPJ4
The radioactive isotope, potassium-40, has argon-40 as a daughter product.A. TrueB. False
A. True. Potassium-40 is a radioactive isotope that undergoes beta decay to produce argon-40 as a daughter product.
Potassium-40 is a radioactive isotope that occurs naturally in the Earth's crust. It has a half-life of 1.3 billion years and undergoes beta decay to produce calcium-40 and argon-40 as daughter products. However, most of the time, potassium-40 decays to produce argon-40, which is a noble gas and therefore very stable. This process is used in geology to date rocks and minerals, as the ratio of potassium-40 to argon-40 can be used to determine the age of a rock or mineral. The decay of potassium-40 to argon-40 is also used in various scientific fields, including biology, where it is used in potassium-argon dating to determine the age of fossils and archaeological materials.
Learn more about Potassium-40 here:
https://brainly.com/question/13321031
#SPJ11
Write a balanced equation for the reaction which occurs with the CaCL2 solution. [Please use fatty acid-CO2 - Na as the structure for your beginning soap.]
The balanced chemical equation for the reaction of calcium chloride (CaCl₂) with a fatty acid (R-COOH) to form soap (R-COONa) and carbon dioxide (CO₂) is:
CaCl₂ + 2 R-COOH → R-COONa + CO₂ + 2 HCl
In this reaction, calcium chloride (CaCl₂) reacts with a fatty acid (R-COOH), which is the structure of a typical soap molecule, to form soap (R-COONa) and carbon dioxide (CO₂) as products. The balanced equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation.
To balance the equation, the coefficients of the reactants and products are adjusted. In this case, two molecules of the fatty acid are required to react with one molecule of calcium chloride to form two molecules of soap, one molecule of carbon dioxide, and two molecules of hydrochloric acid (HCl) as a byproduct.
The balanced equation represents a stoichiometric ratio between the reactants and products in the chemical reaction.
To know more about calcium chloride refer here:
https://brainly.com/question/28944725#
#SPJ11
an agno3 (aq) solution is electrolyzed using a current of 0.65 a. what mass, in grams, of ag is plated out after 20. min? group of answer choices no correct answer 0.78 0.98 0.67 0.87
The current 0.65 A and time 20 min = 1200 seconds. We also need the atomic mass of silver Ag, which is 107.87 g/mol. Finally, we need to use Faraday's constant, which is 96,485 coulombs per mole of electrons. mass in grams = current in amperes x time in seconds x atomic mass in grams / Faraday's constant.
The mass of Ag plated out after electrolysis can be calculated using Faraday’s law of electrolysis which states that the mass of a substance produced at an electrode during electrolysis is directly proportional to the quantity of electricity passed through the cell and inversely proportional to the equivalent weight of the substance. The equivalent weight of Ag is 108 g/mol. mass = current × time × atomic weight / number of electrons × Faraday Constan where, current = 0.65 A time = 20 min = 1200 s atomic weight = 108 g/mol number of electrons = 1 since Ag+ ion gains one electron to form Ag Faraday constant = 96,485 C/mol mass = 0.65 A × 1200 s × 108 g/mol / 1 × 96485 C/mol mass ≈ 0.78 g Therefore, the mass of Ag plated out after 20 minutes is approximately 0.78 g.
learn more about electrons here.
https://brainly.com/question/6663044
#SPJ11
it is possible for a muon to be captured by a proton to form a muonic atom.a muon is identical to an electron except for its mass, which is 105.7 mev /c. (a) calculate the radius of the first bohr orbit of a muonic atom. (b) calculate the magnitude of the lowest energy state. (c) what is the shortest wavelength in the lyman scries for this atom?.
A muonic atom is created when a muon, which has a mass of 105.7 MeV/c, combines with a proton. Muons and electrons are similar in nature, but muons are more massive than electrons.
Answers of the given questions are below :
(a) The radius of the first Bohr orbit of a muonic atom can be calculated using the formula for the Bohr radius:
r = ε₀h² / πmeμ
where ε₀ is the vacuum permittivity, h is Planck's constant, me is the mass of the electron, and μ is the reduced mass of the muonic atom.
Using the given mass of the muon and the mass of the proton, we can calculate the reduced mass:
μ = meMp / (me + Mp) = 186.6 MeV/c²
Substituting the values and solving for r, we get:
r = 0.00054 nm
(b) The magnitude of the lowest energy state can be calculated using the formula:
E = -μe⁴/8ε₀²h²n²
where e is the elementary charge and n is the principal quantum number.
For n=1, we get:
E = -207.2 eV
(c) The shortest wavelength in the Lyman series can be calculated using the formula:
1/λ = R∞(1/n₁² - 1/n₂²)
where R∞ is the Rydberg constant and n₁ and n₂ are the initial and final quantum numbers, respectively.
For the Lyman series, n₁=1 and n₂=2. Substituting the values and solving for λ, we get:
λ = 187.5 nm
To know more about the muonic atom refer here :
https://brainly.com/question/28529640#
#SPJ11
1. The reaction A + 2B products has the rate law, rate = k[A][B]3. If the concentration of B is doubled while that of A is unchanged, by what factor will the rate of reaction increase?
A) 2
B) 4
C) 6
D) 8
E) 9
If the concentration of B is doubled while that of A is unchanged, the reaction rate will increase by eight times. option (d) is correct
The speed at which a chemical reaction occurs to yield products is called the rate of reaction. The rate of the reaction depends on the concentration and depicts the rate of the change of the reactants into products during the chemical changes.
The reaction is shown as,
A+ 2B → P
The rate of reaction is shown as,
rate =K [A][B]³
The concentration of A is constant and of B is doubled.
Let the concentration be,
Concentration of A = 1
Concentration of B = 2
So, the rate of reaction will be,
rate =K [A][B]³
rate= K [1] [2]³
rate= 8K
When the concentration of the B is doubled i.e the concentration of B = 4
Now the rate of reaction will be,
rate =K [A][B]³
rate= K [1] [4]³
rate= 64K
Comparing the rate of the reactions we get, the ratio of 8:1.
Therefore, the factor increases by 8 times.
Option (d) is correct
To know more about reaction rate here
https://brainly.com/question/14766971
#SPJ4
Chemical leaveners used in muffins and why
Chemical leaveners, such as baking powder and baking soda, are commonly used in muffin recipes to provide a light, airy texture.
Baking powder is a combination of an alkaline compound (typically sodium bicarbonate) and an acidic compound (such as cream of tartar), while baking soda is pure sodium bicarbonate.
These leaveners work through a chemical reaction that releases carbon dioxide gas when combined with moisture and heat during the baking process.
The gas forms bubbles in the batter, causing it to expand and rise, resulting in a fluffy, tender muffin. The choice of leavening agent depends on the ingredients and desired taste, as baking soda requires an acidic component (like buttermilk) to activate,
while baking powder is self-contained and works with non-acidic liquids. In summary, chemical leaveners are essential for creating the desired texture in muffins by producing gas bubbles that cause the batter to rise.
To learn more about : leaveners
https://brainly.com/question/30762079
#SPJ11
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be __ 2Kelvin.
The initial and final pressures are not given, we cannot determine the exact value of [tex]T_{2}[/tex]without that information. The pressure values would be needed to complete the calculation.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It is a scalar quantity that quantifies the degree of hotness or coldness of a substance. Temperature is typically measured using various scales, such as Celsius, Fahrenheit, or Kelvin.
The new temperature of the gas after compression can be calculated using the combined gas law, which relates the initial and final conditions of a gas undergoing a change in pressure, volume, and temperature.
The combined gas law is given by:
We can rearrange the equation to solve for [tex]T_{2}[/tex]:
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be 277.05K
What is ideal gas law ?
The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles (a) do not interact with one another and (b) occupy no space (have no volume).
The law states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.
V1/T1 ⇒ V2/T2
V1 ⇒ 560ml
T1 ⇒ 43.0 C
V2 ⇒ 52ml
T2⇒?
T2 ⇒ V2T1/V1
T2 ⇒ 52*43/560
T2 ⇒ 3.9 degree C i.e. 277.05K
To learn more about ideal gas law use:
https://brainly.com/question/1056445
#SPJ1
What factor determines the amount by which a solutions vapor pressure, freezing point, boiling point differ from those properties of the solvent?
The amount by which a solution's vapor pressure, freezing point, and boiling point differ from those of the pure solvent depends on the concentration of solute particles in the solution. This is known as colligative properties.
Colligative properties are physical properties of solutions that depend only on the number of solute particles in the solution, regardless of the chemical identity of the solute particles. The colligative properties include vapor pressure lowering, freezing point depression, boiling point elevation, and osmotic pressure.
For example, in the case of vapor pressure lowering, the presence of solute particles in a solution decreases the number of solvent molecules at the surface of the solution, thereby reducing the vapor pressure of the solution compared to that of the pure solvent.
The amount of vapor pressure lowering is proportional to the concentration of solute particles in the solution, but is independent of the identity of the solute particles.
Similarly, the amount of freezing point depression and boiling point elevation is proportional to the concentration of solute particles in the solution. The colligative properties are important in various fields, such as in the determination of molar mass of unknown solutes or in the process of freeze-drying of food and pharmaceuticals.
For more question on vapor pressure click on
https://brainly.com/question/30459262
#SPJ11
An atom of bromine has a mass about four times greater than that of an atom of neon.How many grams of neon will contain the same number of atoms as 1,000 g of bromine?A) 4 g Ne B) 250 g Ne C) 400 g Ne D) 1,000 g Ne E) 4,000 g Ne
4000 g of neon will contain the same number of atoms as 1,000 g of bromine.
Hence, the correct option is E.
The mass of one Br atom is four times greater than the mass of one Ne atom. Therefore, the number of Ne atoms that would have the same mass as 1,000 g of Br is
(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)
To find the number of Br atoms in 1,000 g Br, we divide 1,000 g Br by the molar mass of Br
1,000 g Br / 79.904 g/mol = 12.51 mol Br
One mole of any substance contains Avogadro's number (6.02 x 10^23) of particles (atoms, molecules, etc.).
Therefore, the number of Br atoms in 12.51 mol Br is
12.51 mol Br x (6.02 x 10^23 atoms/mol) = 7.53 x 10^24 Br atoms
Now we can calculate the mass of Ne that would contain the same number of atoms as 1,000 g Br
(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)
= (7.53 x 10^24 atoms) x (79.904 g/mol) / (20.180 g/mol)
= 2.99 x 10^25 g Ne
Therefore, 4,000 g Ne (rounded to the nearest thousand) has same number of atoms as 1,000 g of bromine.
Hence the correct option is E.
To know more about neon here
https://brainly.com/question/20365054
#SPJ4
a 0.250 m solution of a weak acid has a ph of 2.67. what is the value of ka for the acid?
To solve this problem, we need to use the formula for calculating the Ka of a weak acid: Ka = [H+][A-]/[HA].
where [H+] is the concentration of hydrogen ions (protons), [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid. We are given the pH of the solution, which is 2.67. We know that pH = -log[H+], so we can find the concentration of hydrogen ions: [H+] = 10^(-pH) = 10^(-2.67) = 0.00200 M.
Since this is a weak acid, we can assume that most of the acid is in the form of HA, and only a small fraction has dissociated into H+ and A-. Therefore, we can assume that the concentration of HA is approximately equal to the initial concentration of the acid, which is 0.250 M.
Now we need to find the concentration of A-. To do this, we use the fact that the acid is weak, which means that its dissociation is described by the equilibrium: HA ⇌ H+ + A-, The equilibrium constant for this reaction is Ka. At equilibrium, the concentrations of the reactants and products are related by the expression: Ka = [H+][A-]/[HA].
We know the values of Ka and [H+] (from the pH), and we have already estimated the value of [HA]. Therefore, we can solve for [A-]: Ka = [H+][A-]/[HA], Ka = (0.00200)(x)/(0.250 - x), where x is the concentration of A- at equilibrium (which we don't know yet). Solving for x, we get: x = 0.0087 M, Now we can calculate the value of Ka: Ka = [H+][A-]/[HA]
Ka = (0.00200)(0.0087)/(0.250 - 0.0087), Ka = 7.2 x 10^-5, Therefore, the value of Ka for the weak acid is 7.2 x 10^-5.
To know more about hydrogen click here
brainly.com/question/30037191
#SPJ11
find the value of Ka for the weak acid. To calculate the Ka value of a weak acid with a 0.250 M concentration and a pH of 2.67:
Step 1: Calculate the hydrogen ion concentration [H+] using the pH value.
pH = -log[H+]
2.67 = -log[H+]
[H+] = 10^(-2.67)
Step 2: Determine the concentration of the weak acid and its conjugate base.
Initial concentration of the weak acid (HA) = 0.250 M
Initial concentration of its conjugate base (A-) = 0
Since the weak acid partially dissociates, let x be the change in concentration:
HA ⇌ H+ + A-
0.250 - x x x
Step 3: Write the expression for Ka.
Ka = ([H+][A-]) / [HA]
Step 4: Use the equilibrium concentrations in the Ka expression.
Ka = (x)(x) / (0.250 - x)
Step 5: Since x is very small compared to 0.250, you can simplify the expression.
Ka ≈ (x^2) / 0.250
Step 6: Substitute the [H+] value obtained in Step 1 for x.
Ka ≈ (10^(-2.67))^2 / 0.250
Step 7: Calculate the Ka value.
Ka ≈ 2.189 × 10^(-5)
The value of Ka for the weak acid is approximately 2.189 × 10^(-5).
To know more about pH value of a week acids:
https://brainly.com/question/3191232
#SPJ11
4H₂O +202 → 4H₂O₂
Balancing chemical equations
Reactions tend to run to completion if a product
a. Has a high melting point.
b. Is precipitated as a solid
c. Is a liquid
d. Is ionic
Reactions tend to run to completion if a product precipitated as a solid. Option B is correct.
When one of the products is taken out of the reaction mixture, reactions frequently proceed to completion. If a product is precipitated as a solid, it is no longer in the reaction mixture and is effectively removed from the system. This drives the reaction to completion in order to produce more of the solid product.
On the other hand, the physical state of a product (high melting point, liquid, or ionic) does not necessarily affect the extent to which a reaction runs to completion. While a high melting point may make it difficult to remove the product from the reaction mixture, it does not necessarily prevent the reaction from reaching completion.
Hence, B.is the correct option.
To know more about reaction mixture here
https://brainly.com/question/15541433
#SPJ4
how many moles of H2SO4 need to react with 10.0 mol of iron (III) hydroxide
Answer:
30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.
Explanation:
The balanced chemical equation for the reaction between H2SO4 and Fe(OH)3 is: Fe(OH)3 + 3H2SO4 → Fe2(SO4)3 + 3H2O According to the equation, 1 mole of Fe(OH)3 reacts with 3 moles of H2SO4. Therefore, to determine how many moles of H2SO4 are needed to react with 10.0 mol of Fe(OH)3, we need to use the mole ratio between Fe(OH)3 and H2SO4: 10.0 mol Fe(OH)3 x (3 mol H2SO4 / 1 mol Fe(OH)3) = 30.0 mol H2SO4.
Therefore, 30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.
Convert 125% to a fraction in lowest terms. *
O 11/2
0 11/3
O 11/4
O 12/5
5/4 is the fraction value for 125%. A fraction consists of two components. The numerator is the figure at the highest point of the queue.
The components of a whole and group of items are represented by fractions. A fraction consists of two components. The numerator is the figure at the highest point of the queue. It details the number of equal portions that were taken from the total or collection. The denominator is the figure that appears below the line. It displays the total amount of identical objects within a collection or the total amount of equal sections that the collection is divided into.
125%= 125/100=5/4
To know more about fraction, here:
https://brainly.com/question/10354322
#SPJ1
would breath analyzers measure non potable alcohols or organic vapors, such as methanol or rubbing alcohol?Any organic reducing agent will react with dichromate. Organic compounds that absorb IR light in the same waveband as ethanol can be detected. An alcohol fuel cell will also run on similar organic substances.
Breath analyzers can not effectively measure non potable alcohols or organic vapors because they may have different chemical properties and concentrations which can result in inaccurate readings.
Can breath analyzers measure non potable alcohols or organic vapors?Breath analyzers are designed to measure the concentration of ethanol in a person's breath to estimate their blood alcohol content (BAC). Its work by detecting and analyzing the alcohol molecules in the breath sample provided by the user.
But most breath analyzers are not capable of accurately measuring non-potable alcohols or organic vapors because their sensors are specifically calibrated to detect ethanol.
Read more about breath analyzers
brainly.com/question/13339812
#SPJ1
Question 32
Which one of the following, when burned, emits the most carbon dioxide?
a. wood b. natural gas
c. oil
d. coal
Coal emits the most carbon dioxide when burned. Coal is a fossil fuel that is commonly used in power plants to generate electricity.
When burned, coal releases carbon dioxide as well as other pollutants such as sulfur dioxide, nitrogen oxides, and particulate matter. These emissions contribute to air pollution and climate change.
In contrast, burning natural gas emits less carbon dioxide than coal. Natural gas is composed mainly of methane, which has a lower carbon content than coal. Oil also emits less carbon dioxide than coal but more than natural gas. Burning wood also releases carbon dioxide but is considered to be carbon-neutral because the carbon dioxide released is equal to the amount absorbed by the tree during its lifetime.
However, burning wood can still contribute to air pollution and is not a sustainable long-term energy source. Overall, coal is the most carbon-intensive fossil fuel and a major contributor to climate change. The transition to cleaner energy sources such as renewable energy and natural gas can help reduce carbon emissions and mitigate the impacts of climate change.
To learn more about, carbon dioxide
https://brainly.com/question/21256960
#SPJ11
A. H2OB. NH3C. BH3D. CH4E. SiH4Which has a trigonal-pyramidal molecular geometryâ
The molecule that has a trigonal-pyramidal molecular geometry is B. [tex]NH_{3}[/tex]
To understand why [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry, we need to look at its Lewis structure. The nitrogen atom has five valence electrons, and each hydrogen atom has one valence electron. Therefore, the total number of valence electrons in [tex]NH_{3}[/tex] is 8. In the Lewis structure, the nitrogen atom is placed in the center with three hydrogen atoms surrounding it, each forming a single covalent bond with the nitrogen atom. This structure has one lone pair of electrons on the nitrogen atom.
To determine the molecular geometry, we use the VSEPR theory, which states that electron pairs around a central atom will arrange themselves in such a way as to minimize repulsion. In [tex]NH_{3}[/tex], there are four electron pairs around the nitrogen atom - three bonding pairs and one lone pair. The bonding pairs repel each other, as do the lone pair and bonding pairs. The repulsion causes the molecule to take on a trigonal-pyramidal shape, with the three hydrogen atoms at the base and the lone pair at the apex of the pyramid.
In summary, [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry because of the repulsion between the bonding and lone pairs of electrons around the nitrogen atom. Therefore, Option B is correct.
Know more about Lewis Structure here:
https://brainly.com/question/20300458
#SPJ11
What is the term for the value corresponding to the number of atoms in 12.01 g of carbon?
The term for the value corresponding to the number of atoms in 12.01 g of carbon is Avogadro's number.
Avogadro's number is defined as the number of atoms or molecules in one mole of a substance. One mole of any substance contains 6.022 x 10²³ atoms or molecules. This value is essential in chemistry as it allows scientists to relate the mass of a substance to the number of atoms or molecules present.
For example, if we know the mass of a substance, we can calculate the number of atoms or molecules present using Avogadro's number. Similarly, if we know the number of atoms or molecules present, we can calculate the mass of the substance using the molar mass.
Avogadro's number is named after Italian scientist Amedeo Avogadro, who first proposed the concept of molecules in 1811. It is a fundamental constant in chemistry and is used in many calculations, including those related to stoichiometry, gas laws, and solutions.
Learn more about Avogadro's number here: https://brainly.com/question/30340398
#SPJ11
Question 11
Which one of the following has been implicated in many rush-hour traffic accidents?
a. Carbon dioxide poisoning
b. Nitrogen oxide poisoning
c. Carbon monoxide poisoning
d. Ozone poisoning
The correct answer is c. Carbon monoxide. Poisoning has been implicated in many rush-hour traffic accidents. Carbon monoxide is a colorless, odorless gas that can be produced by the incomplete burning of fossil fuels, such as gasoline, in vehicles. When inhaled, carbon monoxide can interfere with the body's ability to transport oxygen, leading to dizziness, confusion, and even death. It is important to make sure vehicles are properly maintained and that exhaust systems are functioning correctly to prevent carbon monoxide poisoning.
Carbon monoxide poisoning has been implicated in many rush-hour traffic accidents, as it can lead to symptoms such as dizziness, confusion, and impaired coordination, which can affect a driver's ability to operate a vehicle safely.
To know about pathways about human body pathway poisoning, click here:-
https://brainly.com/question/30156446
#SPJ11
Question 29
Lakes having characteristics of being clean, high in DO, deep and receiving few nutrients:
a. Oligotrophic
b. Mesotrophic
c. Euphoric
d. Eutrophic
The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes.
The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes. Oligotrophic lakes are generally low in nutrients and productivity, resulting in clear water, high oxygen levels, and limited biological productivity.
These lakes are often deep and have a low rate of nutrient input, usually from sources such as rainfall or groundwater. The opposite of oligotrophic lakes is eutrophic lakes, which are high in nutrients and productivity, resulting in murky water, low oxygen levels, and high biological productivity.
Visit to know more about Oligotrophic:-
brainly.com/question/5552139
#SPJ11
Question 7
The major source of sulfur dioxides is:
a. Natural erosion of soils
b. Fuel combustion
c. Industrial processing
d. Road traffic
B. The major source of sulfur dioxides is fuel combustion, such as burning coal and oil in power plants and other industrial processes.
The fundamental chemical process of releasing energy from a fuel and air combination is combustion, sometimes referred to as burning. While natural erosion of soils can release small amounts of sulfur dioxide, it is not a significant contributor to the levels we see in the atmosphere. Industrial processing, such as refining metals and producing chemicals, can also release sulfur dioxide, but to a lesser extent than fuel combustion. Road traffic can contribute to air pollution, but sulfur dioxide emissions from cars and trucks are generally lower than those from industrial sources.
Learn more about combustion here:
brainly.com/question/24703998
#SPJ11