3. Particles carrying no charge ____________

The amount of work done by the hairdryer is equal to 450 Kilojoules.

Given the following data:

To determine the amount of work done by the hairdryer:

Mathematically, the work done by an object with respect to power and time is given by the formula:

[tex]Work\;done = power \times time[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 750 \times 600[/tex]

Work done = 450,000 Joules

Note: 1000 Joules = 1 Kilojoules.

Work done = 450 Kilojoules.

Read more: https://brainly.com/question/13818347

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

Resistance is the obstruction of electrons in an electrically conducting material.

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

A conjugate acid is formed from the base  by accepting a proton from the acid .

A conjugate base is obtained from the Brownstead - Lowry acid when it looses a proton while the conjugate acid is obtained from the Brownstead - Lowry base when it accepts a proton. In the Brownstead - Lowry sense, acid base reaction involves the loss or gain of a proton.

Consider the hypothetical reaction; AH + :B ⇄ BH + :A. The specie BH is the conjugate acid while the specie  :B is the  Brownstead - Lowry base . The specie :A is the conjugate base while the specie AH is the  Brownstead - Lowry acid.

Learn more about conjugate acid: https://brainly.com/question/10468518

The mass of block 1 will be 1.99 kg.The tension force is applied along the whole length of the wire, pulling energy equally on both ends.

The tension force is described as the force transferred through a rope, string, or wire as it is pulled by opposing forces.

Given that,

Mass of block 1=? kg

The coefficient of the kinetic friction,μ=0.200

Now consider the weight component in the uphill direction.The weight is found as;

[tex]\rm W=m_1gsin \theta[/tex]

The force is balanced in the vertical direction as;

[tex]\rm T=F_f-W[/tex]

When the force of friction is;

[tex]\rm F_F=\mu_k N[/tex]

[tex]\rm F_f=(m_1 gcos \theta)[/tex]

Substitute the value in the vertical balanced equation;

[tex]\rm T=m_1gsin(27.5)^0-\mu_kmgcos27.5^0[/tex]

[tex]\rm T-m_2g=0\\\\T=m_2g[/tex]

[tex]\rm (10.1) g=m_1g(0.699-0.2 \times(-0.714) ) \\\\ (10.1) g=m_1g (0.699+0.1428) \\\\\ (10.1) g= m_1 \times 0.8418 \\\\ m_1 =11.99 \ kg[/tex]

Hence the mass of block 1 will be 1.99 kg.

To learn more about the tension force refer to the link;

https://brainly.com/question/2287912

#SPJ2

A force of 50 N was applied to an object with a mass of 5 kg, then the acceleration of the object will be 10 m/s².

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.

There are several types of acceleration :

According to the question, the given values are :

Force, F = 50 N

Mass, m = 5 kg

Force = m × a

a = 50 / 5

a = 10 m/s².

Hence, the acceleration of the object will be 10 m/s².

To get more information about acceleration :

https://brainly.com/question/2303856

#SPJ2

The average momentum of Cart 1 during the entire time shown before the collision is 0.24 kgm/s.

The given parameters:

The average velocity of the cart 1 before collision is calculated as follows;

[tex]v = \frac{\Delta x}{\Delta t} \\\\v = \frac{0.55 - 0.31}{0.5 - 0} \\\\v = 0.48 \ m/s\\\\[/tex]

The average momentum of Cart 1 during the entire time shown before the collision is calculated as follows;

[tex]P = mv\\\\P = 0.5 \times 0.48\\\\P = 0.24 \ kgm/s[/tex]

Learn more about average momentum here: https://brainly.com/question/12979244

Answer:

Cake Crunch (Enriched Wheat Flour [Bleached Flour, Niacin, Reduced Iron, Thiamine Mononitrate, Riboflavin, Folic Acid]), Sugar, Vegetable Shortening [Partially Hydrogenated Soybean and Cottonseed Oil], Salt, Sodium Bicarbonate, Artificial Flavor, Soy Lecithin, Soybean Oil, Coconut Oil, Sugar, Chocolate Liquor, ...

Answer:

Explanation:

Work is the area under the curve between the limits

W = ½(5)(8 - 5) = 7.5 J

The work done when an object moves from 5 m to 8 m is 7.5 J.

The work done in moving an object from one point to another is equal to the product of force and displacement of the object.

W = Fs

The work done on an object is equal to area under the curve

The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J

Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.

Learn more about work done here: https://brainly.com/question/8119756

Answer:

Explanation:

The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.

He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.

I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.

So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.

Answer:

3,958.8 mi

Explanation:

Answer:

D) 8

Explanation:

Due to the octet rule the most stable atoms will have 8 valence electrons.

Answer:

The first one is the only one that is true all the time

Explanation:

The second one may be true if friction is high enough.

The other three are false all the time

Answer:

Explanation:

For an ideal spring over a frictionless horizontal surface, stored energy is only a function of the spring constant k and the distance of compression. The mass of the block doing the compressing is irrelevant

Energy stored in the first example is

Em = ½kd²

Energy stored in the second example is

E₂m = ½k(2d)² = 4(½kd²) = 4Em

So the second situation has four times as much stored spring potential energy as the first situation

4 Em is correct

Good job!

Explanation:

Downstream: you just sum the magnitude of the velocity vectors:

3km/h + 4km/h = 7km/h

Upstream: difference of the magnitudes of the velocity vectors, in absolute value:

|3km/h - 4km/h| = 1km/h

Answer:

The movement of Tectonic plates.

Explanation:

The initial velocity of the 3250 Kg mass is 2.1 m/s. The distance covered by the larger mass in 5s is 4.7 cm.

In this problem, we have to apply the law of conservation of linear momentum. Note that;

Momentum before collision = Momentum after collision

m1u1 + m2u2 = m1v1 + m2v2

(2150 × 10) + (3250u1) = (2150 + 3250)5.22

21500 + 3250u1 = 5400 × 5.22

3250u1  = 28188 - 21500

u1 = 28188 - 21500/3250

u1 = 2.1 m/s

2) Again from the principle of conservation of linear momentum;

(0.40 × 3.5) + (0.60 × 0) = (0.40  × 0.70) + (0.60 × v2)

1.4 = 0.28 + 0.60v2

1.4 - 0.28 =  0.60v2

v2 = 1.87 cm/s

Using;

s = 1/2 ( u + v)t

s = 1/2(0 + 1.87) × 5

s = 4.7 cm

Learn more: https://brainly.com/question/8898885

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

[tex]\huge\color{pink}\boxed{\colorbox{black}{Answer ☘}}[/tex]

12 mC

We are given that...

[tex]C_{1} = 4mF \\ V_{1} = 50v \\ C_{2} = 6mF \\ V_{2} = 30v \\ \\ we've \: to \: find \: the \: final \: charge \: on \: the \: 6mF \\capacitor \:- \\ \\ we \: know \: that ,\: \\ Q = CV \\ \\ using \: the \: formula \: \\ Q_{1} = 4 \times 50 = 200mC \\ Q_{2} = 6 \times 30 = 180mC \\ \\ total \: charge , \: Q_{1} - Q_{2} = 200 - 180 = 20mC \\ \\ let \: V \: be \: the \: final \: potential \: \\ 4V + 6V = 20mC\\ 10V = 20mC \\ V = \frac{20}{10} = 2V \\ final \: charge \: Q = CV = 6 \times 2 = 12mC[/tex]

therefore,

hope helpful~

Answer:i am pro

kExplanation:

The region a represents the distance of the electron from the nucleus.

According to the wave mechanical model of the atom, the probability of finding an electron within a given volume element (representing the atom) is the square of the wave function psi.

Since a is the region in space where there is the greatest probability of finding the electron in the atom, it follows that distance of the electron form the atom is always a.

Learn more about the wave mechanical model: https://brainly.com/question/1382157

Answer: I think its zero-

I dont really know about this...

Answer:

Explanation:

Near the earth's surface where gravity is approximately 10 m/s² downward

v = u + at

v = 5 + (-10)(1) = -5 m/s

so it has the same speed but in the opposite (downward) direction.

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

Instantaneous velocity is defined as the rate of change of position for a given interval of time. And it also represents the direction.

Here,

The object is freely falling.

So, the acceleration of the object is the acceleration due to gravity.

a = g = 9.8 m/s²

Initial velocity of the object, u = 5 m/s  (upward velocity)

Time given, t = 1

Using the first equation of motion,

v = u + at

v = 5 + (-9.8) x 1  

( negative sign is due to it is directed downwards which is opposite to u)

v = -4.8 m/s

That means the instantaneous velocity is directed downwards.

Hence,

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

To learn more about instantaneous velocity, click:

https://brainly.com/question/2273637

#SPJ3

Answer:A.the Oort cloud

Explanation:

Answer:

try answer A..the Ootor cloud

Answer:

Explanation:

Conservation of momentum

a) the man and skateboard move to the right.

b) His speed depends on the reference frame of the ball speed.

If the speed of the ball is 10 m/s relative to ground and the man's final speed is v, then.

(75 + 20)(0) = 20(10) + 75(v)

v = -200/75 = -2.6666...

|v| = 2.7 m/s relative to the ground

This is the likely answer they are seeking.

If the ball is thrown with a speed of 10 m/s relative to the man

(70 + 20)(0) = 20(v + 10) + 75v

20v + 200 = - 75v

          200 = - 95v

               v = -2.105... m/s velocity or a speed of

              |v| = 2.1 m/s relative to ground

and the ball has a velocity of 10 - 2.1 = 7.9 m/s relative to ground.

The initial temperature of the metal bolt is 80.8 °C

We'll begin by calculating the heat absorbed by the water.

Q = MCΔT

Q = 0.15 × 4184 × 4

Q = 2510.4 J

Finally, we shall determine the initial temperature of the metal bolt.

Q = MC(T₂ – T₁)

–2510.4 = 0.050 × 899 (25 – T₁)

–2510.4 = 44.95 (25 – T₁)

Clear bracket

–2510.4 = 1123.75 – 44.95T₁

Collect like terms

–2510.4 – 1123.75 = –44.95T₁

–3634.15 = –44.95T₁

Divide both side by –44.95

T₁ = –3634.15 / –44.95

T₁ = 80.8 °C

Thus, the initial temperature of the metal is 80.8 °C.

Learn more about heat tranfer:

https://brainly.com/question/26034272

The change in the Gibb's free energy per mole (G) is 1.96 J.

The given parameters:

The change in the Gibb's free energy per mole (G) is calculated as follows;

[tex]\Delta G = V(P_2-P_1) \\\\[/tex]

where;

V is the volume of the ice

[tex]Density = \frac{Mass}{Volume} \\\\Volume = \frac{Mass}{Density} \\\\Volume = \frac{18 \times 10^{-3} \ kg}{917 \ m^3} \\\\Volume = 1.96 \times 10^{-5} \ m^3\\\\Volume = 1.96 \times 10^{-5} \ m^3 \times \frac{1000 \ L}{m^3} \\\\Volume = 0.0196 \ L[/tex]

Change in pressure;

[tex]P_2 - P_1 = 2.0 \ bar \ - \ 1.0 \ bar = 1.0 \ bar = 0.987 \ atm[/tex]

The change in the Gibb's free energy per mole (G);

[tex]\Delta G= V(P_2-P_1)\\\\\Delta G = 0.0196\ L \times 0.987\ atm \\\\\Delta G = 0.0193 \ L.atm\\\\1 \ L.atm = 101.325 \ J\\\\\Delta G = 0.0193 \ L.atm \times \frac{101.325 \ J}{1 \ L.atm} \\\\\Delta G = 1.96 \ J[/tex]

Thus, the change in the Gibb's free energy per mole (G) is 1.96 J.

Learn more about Gibb's free energy here: https://brainly.com/question/10012881

Answer:

Earth's magnetic field (and the surface magnetic field) is approximately a magnetic dipole, with the magnetic field S pole near the Earth's geographic north pole (see Magnetic North Pole) and the other magnetic field N pole near the Earth's geographic south pole (see Magnetic South Pole). This makes the compass usable for navigation. The cause of the field can be explained by dynamo theory. A magnetic field extends infinitely, though it weakens with distance from its source. The Earth's magnetic field, also called the geomagnetic field, which effectively extends several tens of thousands of kilometres into space, forms the Earth's magnetosphere. A paleomagnetic study of Australian red dacite and pillow basalt has estimated the magnetic field to be at least 3.5 billion years old

Answer:

I think the answer is goat

The value of the current in each arm of the circuit is given by Kirchhoff's

Rules.

Reasons:

By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;

Which by the direction of the currents in the given circuit diagram, we have;

Therefore;

I₁ = I₃ + I₂

According to Kirchhoff's loop rule theory, we have;

In the loop having the 2 Volts emf., we have;

-I₃·R₁ + 2 + I₂·R₂ = 0

I₃ = 1.17 A

R₁ = 2 Ω

R₂ = 2 Ω

Which gives;

-1.17 × 2 + 2 + I₂×2 = 0

I₂ × 2 = 2.34 - 2 = 0.34

I₂ = 0.34 ÷ 2 = 0.17

I₂ = 0.17 A

From the loop having the 7 Volts emf. we have;

7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0

Which gives;

7 - 0.34 - 5·I₁ = 0

5·I₁ = 7 - 0.34 = 6.66

I₁ = 6.66 ÷ 5 = 1.332

Therefore;

Learn more about electric circuits here:

https://brainly.com/question/2608877