Total, 2 moles of iron (II) nitrate would be needed to produce a 4 moles of lithium nitrate.
The balanced chemical equation for the reaction is;
2Li + 1Fe(NO₃)₂ → 1Fe + 2LiNO₃
From this equation, we can see that 2 moles of lithium nitrate are produced for every 1 mole of iron (II) nitrate used.
To determine how many moles of iron (II) nitrate are needed to produce 4 moles of lithium nitrate, we can use the mole ratio from the balanced equation;
moles of LiNO₃ = 4
moles of Fe(NO₃)₂ = (4 mol LiNO₃) x (1 mol Fe(NO₃)₂ / 2 mol LiNO₃)
= 2 mol Fe(NO₃)₂
Therefore, 2 moles of iron (II) nitrate is needed to produce 4 moles of lithium nitrate.
To know more about iron (II) nitrate here
https://brainly.com/question/31428625
#SPJ1
If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution?
The concentration of NaOH in the resulting solution is 1.80 mol/L.To determine the concentration of NaOH in the resulting solution, we need to use the equation:
What is concentration ?
concentration (in units of mol/L) = moles of solute / volume of solution (in units of L)
First, we need to calculate the moles of NaOH added to the flask:
moles of NaOH = mass of NaOH / molar mass of NaOH
moles of NaOH = 36.0 g / 40.00 g/mol
moles of NaOH = 0.900 mol
Next, we need to determine the volume of the solution. We know that 36.0 g of NaOH were added to a 500.0 mL volumetric flask, but the final volume of the solution is not given. We can assume that the volume of the solution is 500.0 mL, since that is the volume of the flask. However, we also need to take into account the fact that the addition of NaOH may cause the volume of the solution to increase slightly due to the dissolution of the solute.
Assuming that the volume of the solution is 500.0 mL, we can convert this to units of liters:
volume of solution = 500.0 mL / 1000 mL/L
volume of solution = 0.500 L
Now we can use the equation above to calculate the concentration of NaOH in the resulting solution:
concentration = 0.900 mol / 0.500 L
concentration = 1.80 mol/L
Therefore, the concentration of NaOH in the resulting solution is 1.80 mol/L.
To know more about concentration, visit:
https://brainly.com/question/23158560
#SPJ1
Complete question is: If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, 1.80 mol/L concentration of NaOH in the resulting solution.
Determine the mass in grams of 7.55 × 1021 molecules of water H2O.
a.
7.14 × 10-4 g
d.
22.6 g
b.
2.59 x 102 g
e.
2.59 g
C.
0.226 g
The mass in grams of 7.55 × 10²¹ molecules of water H₂O is 1.25 × 10⁻² g.
This is using mole concept.
What is mole?The International System of Units (SI) uses the mole (symbol mol) as the unit of material amount. How many elementary entities of a particular substance are present in an object or sample is determined by the quantity of that material.
Exact 6.02214076 × 10²³ basic entities make up the mole. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle like a proton depending on the makeup of the substance. For instance, although having differing volumes and masses, 10 moles of water (a chemical compound) and 10 moles of mercury (a chemical element) both have the same quantity of substance, and the mercury has exactly one atom for each molecule of the water.
The mass in grams of 7.55 x 10²¹ molecules of water H₂O can be calculated using Avogadro's number. Avogadro's number is 6.02 x 10²³molecules/gram-mole.
Mass (grams) = (7.55 x 10²¹ molecules) (1 Gram/6.02 x 10²³ molecules)
Mass (grams) = 1.25 x 10⁻² grams
To know more about Avogadro's number, visit:
https://brainly.com/question/11907018
#SPJ1
10. How many moles are in 20 grams of Carbon (12 amu)?
11. How many moles are in 2.9 grams of Lithium (7 amu)?
12. How many moles are in 0.001 grams of Chlorine (35 amu)?
13. How many grams are in 10 moles of Beryllium (9 amu)?
14. How many grams are in 3.4 moles of Nitrogen (14 amu)?
15. How many grams are in 1.5 moles of Hydrogen (1 amu)?
16. How many atoms are in 10 moles of Helium?
17. How many atoms are in 0.003 moles of Neon?
18. How many atoms are in 2.7 moles of Sodium?
19. How many atoms are in 3.0 grams of Boron (9 amu)?
20. How many atoms are in 5.6 grams of Nitrogen?
i need help please for all of them
What is the molar solubility, S, of AgNO, if Ksp , = 6.00 × 10-4?
As a result, AgNO3 has a molar solubility of 0.0245 M.
what does molar solubility mean?A compound's capacity to dissolve in a particular substance known as a solvent is indicated by a property termed molar solubility (M). It is specifically the most moles of a solute that may dissolve in one liter of solvent.
The Ksp (solubility product constant) formula, which is the product of the ion concentrations elevated to their stoichiometric coefficients in a saturated solution4, can be used to determine the molar solubility of AgNO3.
The formula for AgNO3 is AgNO3 → Ag+ + NO3-.
Therefore, Ksp = [Ag+][NO3-] = 6.00 × 10⁻⁴
Since AgNO3 dissociates completely in water, [Ag+] = [NO3-] = S (molar solubility).
Thus, Ksp = S² = 6.00 × 10⁻⁴.
Solving for S gives us S = √(Ksp) =√(6.00 × 10⁻⁴) = 0.0245 M⁴
To know more about molar solubility visit:
brainly.com/question/28170449
#SPJ1
Use the kinetic-molecular theory to explain each observation given.
a. Wax melts near the flame of a burning candle.
b. Liquid water may be converted into ice cubes in a freezer.
c. Ginger ale flows to match the shape of a glass.
d. Water gradually evaporates from a swimming pool.
e. Water vapor condenses inside house windows on cold days.
f. Snow gradually disappears, even when the tem- perature remains below freezing. g. Solids and liquids cannot be compressed as much as gases.
a. Wax melts near the flame of a burning candle because the kinetic-molecular theory states that the higher the temperature, the faster the molecules move. Since the flame of a burning candle is hot, the wax molecules move faster, allowing them to take up more space and eventually melt.
What is kinetic-molecular theory?The kinetic-molecular theory is based on the following five fundamental principles:
The average distances between the molecules that make up a gas are substantially bigger than the diameters of the individual molecules. When compared to the volume of the gas itself, the volume filled by the gas' molecules is insignificant.
In a perfect gas, neither the molecules nor the container walls are attracted to one another.
The molecules move randomly and continuously and, as physical objects, they are subject to Newton's laws of motion. Until they collide with one another or the container walls, the molecules move in a straight line.
Collisions are fully elastic; although two molecules' orientations and kinetic energies change when they collide, the overall kinetic energy is conserved. It is not "sticky" to collide.
The relationship between the average gas molecule kinetic energy and absolute temperature is direct. The word "average" is crucial in this context because individual molecules' velocities and kinetic energy will vary widely, with some even having zero velocities at specific times. This suggests that if the temperature were to drop to absolute zero, all molecular motion would stop.
Explanation:
b. Since a freezer is much colder than room temperature, the water molecules move very slowly and become organized, allowing them to form ice cubes.
c. All matter is made up of many small particles that are in constant motion. When the ginger ale is poured into the glass, the molecules of the liquid spread out to fill the shape of the glass due to their motion.
d. The molecules in a liquid are in constant motion, and that when they move, they bump into each other, passing energy from one to the other. This energy causes the particles to move faster. As they move faster, they create turbulence that causes them to break away from the liquid surface. These particles then form a vapor, which is an invisible form of water called water vapor. As these particles accumulate together, they gradually evaporate from the swimming pool, eventually diminishing its water level.
e. Water vapor condenses inside house windows on cold days because the molecules of water vapor slow down and as they lose energy they no longer have enough kinetic energy to remain in the gaseous state. The molecules then condense and form liquid water droplets on cool surfaces such as windows.
f. Snow gradually disappears even when the temperature remains below freezing because the heat stored in the snow starts to melt the snow. This occurs even when the outside temperature remains at freezing or below because the heat is released from the snow and warms the surrounding air.
g. Solids and liquids cannot be compressed as much as gases because the particles of gases have more energy and thus more freedom of movement than particles of solids and liquids. The particles of gases can move around and can occupy larger spaces than particles of solids and liquids, allowing them to be compressed more effectively.
To know more about kinetic energy, visit:
https://brainly.com/question/15764612
#SPJ1
What is the oxidation state of the underlined atom in the reaction:
The element with an underlined name has the oxidation state U2O74 in the specified compound state.
How do you calculate the oxidation number for non-chemists?Each element's charge corresponds to its oxidation number in a binary ionic compound. Looking at the periodic chart will reveal the charge, which is determined by the element's group: Elements in group 1: +1 charge. components from group 2: +2 charge.
Carbon monoxide (CO), the only typical example of carbon in a +2 oxidation state, is a gas. Due to the ease with which carbon monoxide may be converted into carbon dioxide, which has a more thermodynamically stable oxidation state of +4, carbon monoxide is a powerful reducing agent.
learn more about oxidation state
https://brainly.com/question/25551544
#SPJ1
Question 1
This diagram shows Earth in four different positions during its yearly orbit around the sun. Which of the following accurately describes the position of the United States during the summer months?
Question 2
The diagram models 4 lunar phases. During which one is the tide the highest?
Question 3
An HR Diagram is shown below. A star that has a luminosity of 10^-2 is likely a…
Question 4
Earth's atmosphere blocks short wavelengths of the electromagnetic spectrum. Which telescopes DO NOT need to be placed in orbit around Earth to observe short-length radiation?
Question 5
A student models the relationship between the Earth and the Sun using string and a ball. Which of the following explains the relationship demonstrated?
Answer 1:
During the summer months in the northern hemisphere (where the United States is located), Earth is in position C, which is when the northern hemisphere is tilted towards the sun.
Answer 2:
The highest tide occurs during the full moon phase, which is represented by position C in the diagram.
Answer 3:
A star that has a luminosity of 10^-2 is likely a red dwarf.
Answer 4:
Telescopes that observe short-wavelength radiation, such as X-rays and gamma rays, do not need to be placed in orbit around Earth because these wavelengths are absorbed by the atmosphere. Therefore, telescopes that observe these wavelengths are typically placed in space, outside of Earth's atmosphere.
Answer 5:
The student is likely demonstrating the relationship between the Earth and the Sun's gravitational pull. The ball represents the Sun, and the string represents the gravitational force pulling the Earth towards the Sun. The demonstration shows how the Earth orbits the Sun due to this gravitational force.
What is gravitational force?Gravitational force is described as a force that exists between any two objects in the universe that have mass.
It is the force that causes objects with mass to be attracted to each other. The magnitude of the gravitational force between two objects depends on their masses and the distance between them.
Along with the electromagnetic force, the strong nuclear force, and the weak nuclear force, gravity is one of the four fundamental forces of the universe.
Sir Isaac Newton initially introduced it in his law of universal gravitation, and Albert Einstein later elaborated on it in his theory of general relativity.
Learn more about Gravitational force at: https://brainly.com/question/27943482
#SPJ1
How many moles of ammonia would be required to react exactly with 0.470 moles of copper(I) oxide in the
following chemical reaction?
2 NH, (g) + 3 CuO (s) -> 3 Cu(s) + Na (8) + 3 H20 (g)
Answer: 0.313 mole of NH3
Explanation:
cl-+peg=hcl+peg rate law, rate constant k
a. The rate law for this reaction is: Rate = k[Cl] [H₂]. This means that the rate of the reaction is directly proportional to the concentrations of both Cl and H₂ molecules.
What is rate law?Rate law is an equation that describes the rate of a chemical reaction as a function of the concentrations of reactants. The rate law allows us to describe how the rate of a reaction changes when the concentrations of reactants are changed. It is derived from the rate equation, which is a mathematical expression that can be used to calculate the rate of a reaction from the concentrations of the reactants and the rate constant.
b. The rate law for this reaction is: Rate = k[O] [Os]. This means that the rate of the reaction is directly proportional to the concentrations of both O and Os molecules.
c. The rate law for this reaction is: Rate = k[NO₂]₂. This means that the rate of the reaction is directly proportional to the square of the concentration of NO₂ molecules.
To learn more about rate law
https://brainly.com/question/16981791
#SPJ1
Complete Question:
I need the math to it to show how I got to the answer, please help
The volume (in liters) of ammonia, NH₃ produced from the reaction is 127 liters (option C)
How do i determine the volume of ammonia produced?First, we shall determine the mole in 17 g of H₂. Details below:
Mass of H₂ = 17 grams Molar mass of H₂ = 2 g/mol Mole of H₂ =?Mole = mass / molar mass
Mole of H₂ = 17/ 2
Mole of H₂ = 8.5 moles
Next, we shall determine the volume of H₂. Details below:
1 mole of hydrogen gas, H₂ = 22.4 Liters
Therefore,
8.5 moles of hydrogen gas, H₂ = (1.24 mole × 22.4 Liters) / 1 mole
8.5 moles of hydrogen gas = 190.4 liters
Finally, we shall determine the volume of ammonia, NH₃ produced. This is shown below:
N₂(g) + 3H₂(g) -> 2NH₃(g)
From the above equtaion,
3 liters of H₂ reacted with 2 liters of NH₃
Therefore
190.4 liters of H₂ will react = (190.4 liters × 2 liters) / 3 liters = 127 liters of NH₃
Thus, from the above illustration, we can conclude that the volume of ammonia, NH₃ produced is 127 liters (option C)
Learn more about volume:
https://brainly.com/question/9614052
#SPJ1
Considering both the forward and reverse directions, identify the Bronsted acids in the reaction below:
CH₃NH₂(aq) + H₂S(aq) ⇄ CH₃NH₃⁺(aq) + HS⁻(aq)
A.) CH₃NH₂ and HS⁻
B.) H₂S and CH₃NH₃⁺
C.) CH₃NH₂ and N₂S
D.) H₂S and HS⁻
E.) CH₃NH₂ and CH₃NH₃⁺
Considering both the forward and the reverse directions, the Bronsted acids in the reaction is H₂S and CH₃NH₃⁺. The correct option is B.
The chemical reaction is as :
CH₃NH₂(aq) + H₂S(aq) ⇄ CH₃NH₃⁺(aq) + HS⁻(aq)
According to the Bronsted - Lowry theory, acids are the substance that will donates the H⁺ ion or the proton and it will forms the conjugate base.
In the forward reaction, the H₂S donates the proton to the CH₃NH₂.
In the reverse reaction, the CH₃NH₃⁺ will donates the proton to the HS⁻.
Hence, the Bronsted - Lowry acids in the reversible reaction are H₂S and CH₃NH₃⁺. The option B is correct.
To learn more about Bronsted acids here
https://brainly.com/question/148529
#SPJ1
V
A student dissolves 11.S g of sodium hydroxide (NaOH) in 250. g of water in a well-insulated open cup. He then observes the temperature of the water rise
from 20.0 °C to 31.3 °C over the course of 6.7 minutes.
Use this data, and any information you need from the ALEKS Data resource, to answer the questions below about this reaction:
NaOH(s) -. Na (ag) + OH (ag)
You can make any reasonable assumptions about the physical properties of the solution. Be sure answers you calculate using measured data are rounded to 3
significant digits.
Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and
published values for this reaction.
is this reaction exothermic, endothermic, or neither?
Oexothermic
O endothermic
O neither
0.°
If you said the reaction was exothermic or endothermic, calculate the amount of
heat that was released or absorbed by the reaction in this case.
Calculate the reaction enthalpy AH.
nen per mole of NaOH.
kJ
According to the question the reaction enthalpy is thus 10610 J / 0.278 moles = 38.3 kJ/mol.
What is enthalpy?Enthalpy is a thermodynamic property of a system that measures the total energy content of a system. It is a state function that is expressed in terms of internal energy, pressure, and volume of a system. Enthalpy represents the amount of energy that is associated with a chemical reaction or physical change.
The reaction is exothermic, meaning that heat is released during the reaction. The amount of heat released can be calculated with the equation q = mcΔT, where q is the heat released, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the change in temperature of the solution. Using the given data, the amount of heat released by the reaction can be calculated as q = (250 g)(4.184 J/g-K)(11.1 K) = 10610 J. The enthalpy change for the reaction can then be calculated by dividing the heat released by the number of moles of NaOH, which is 11.1 g / 40.00 g/mol = 0.278 moles. The reaction enthalpy is thus 10610 J / 0.278 moles = 38.3 kJ/mol.
To learn more about enthalpy
https://brainly.com/question/14047927
#SPJ1
5. Given the following standard enthalpies of formation for the following substances,
H,O (1) = -285.8 kJ/mol
H2O (g) = -241.8 kJ/mol
KOH (aq)=-482.4 kJ/mol
KOH(s) =-425.8 kJ/mol
Determine the enthalpy of the reaction,
2 K(s) + 2 H20(1) - > 2 KOH (aq) + H2(g)
a.
b
-197 kJ/mol
d.
-280 kJ/mol
e.
-1538 kJ/mol
-368 kJ/mol
C
-393 kJ/mol
The enthalpy of the reaction is -393.2 kJ/mol. The answer is (C).
What is enthalpy?Enthalpy of reaction (ΔHrxn) refers to the heat energy that is either absorbed or released during a chemical reaction, while the pressure remains constant. It is determined as the difference between the enthalpies of the products and the reactants, and enthalpy, in turn, refers to the heat energy stored within a substance.
Equation:ΔHf°(H2O(l)) = -285.8 kJ/mol
ΔHf°(KOH(aq)) = -482.4 kJ/mol
ΔHf°(H2(g)) = 0 kJ/mol
ΔHf°(K(s)) = 0 kJ/mol
To calculate the enthalpy of the reaction, we first need to balance the equation:
The given equation is the balanced equation
ΔHrxn = [2ΔHf°(KOH(aq)) + ΔHf°(H2(g))] - [2ΔHf°(H2O(l))]
ΔHrxn = [2(-482.4 kJ/mol) + 0 kJ/mol] - [2(-285.8 kJ/mol)]
ΔHrxn = [-964.8 kJ/mol] - [-571.6 kJ/mol]
ΔHrxn = -393.2 kJ/mol
To know more about enthalpy, click here
https://brainly.com/question/13996238
#SPJ1
4. Pipettes used for the transfer of samples of solutions are always rinsed with a small portion of the solution before the actual sample is taken. Calculate the percent error likely to arise in an experiment if 5-mL, 10-mL, and 25-mL pipettes are used for transfer and each pipette contains 5 drops of water adhering to the inside of the barrel. A single drop of water has a volume of approximately 0.05 mL.
The experiment employing these pipettes would most likely have a 5% error rate.
We use percent error because?When your estimate aims at a known, accurate figure, percent error is a useful metric. Use it to measure how near an estimate is to the actual value, in general. When an approximation value is near to the true value, there are fewer mistakes.
What does percent error for percentages mean?The percent error is the distinction between the estimated value and the actual value in relation to the actual value. In other words, the relative error is multiplied by 100 to calculate the percent error.
To know more about experiment visit:-
https://brainly.com/question/30055326
#SPJ1
mark as brainlist
A snorkeler takes a syringe filled with 17 mL of air from the surface, where the pressure is 1.0 atm, to an unknown depth. The volume of the air in the syringe at this depth is 7.9 mL. What is the pressure at this depth?
Express your answer to two significant figures.
_______________________________
So in short:. Original pressure (at surface) = 1.0 atm Original volume = 17 mLNew volume (at depth) = 7.9 mLUsing Boyle's Law, calculate new pressure:New pressure = (1.0 atm x 17 mL) / 7.9 mL = 2.2 atm two significant figures = 220 kPahow does crushing the candy science.
Although, a part of your question is missing, you might be referring to this full question "How does crushing a candy to smaller pieces affect its digestion?"
Crushing the candy into smaller pieces increases the surface area of the solvent which will result in the reduction of digestion or dissolution.
Digestion is the process in which food taken is broken down into smaller components that can be absorbed into the bloodstream. Digestion helps in converting food into molecules, like glucose so that the body can utilize that energy for its growth and development.
While Crushing the candy into smaller pieces, we are increasing the surface area of the solvent which will result in the reduction of digestion or dissolution of the candy. Thus, the larger the size of the pieces, the slower will be the process of digestion. This physical process in which large pieces of food are cut and crushed into smaller pieces is known as mechanical digestion.
To learn more about digestion;
https://brainly.com/question/16315420
1. You need to take a medicine orally and want quick action. The medicine is available in the form of a compressed tablet or as a loose powder. Which form would give you the desired quick action? Why?
Compared to crushed pills, loose powder medications have a higher surface area, which allows for faster body absorption and disintegration, leading to a speedier effect.
What factors affect how quickly drugs dissolve from tablets?The drug's surface area has a direct relationship with the dissolving rate. Higher dissolving rates may be attained by reducing the particle size since surface area grows as particle size decreases.
How can a tablet dissolve faster than it would otherwise?Therefore, disintegration agents are added to formulations to encourage the breakdown of tablets into minute granules and their component particles. This enables a faster liberation of the drug particles from the tablet matrix, increasing the surface area for subsequent dissolving.
To know more about absorption visit:-
https://brainly.com/question/2496894
#SPJ1
The force that holds water molecules together in a raindrop is called.
OA. polar attraction
OB. magnetic attraction
OC. covalent bonding
OD. ionic bonding
A: Polar Attraction, because water molecules have a slightly positive charge on one end and a slightly negative charge on the other end, which causes them to be attracted to each other due to electrostatic forces.
What is Polar attraction?Polar attraction is the attraction between two polar molecules. Polar molecules contain atoms with slightly different charges, resulting in a slightly positive end and a slightly negative end of the molecule. The attractive force that occurs between two polar molecules is the result of the positively charged end of one molecule being attracted to the negatively charged end of the other molecule. This type of attraction is known as a dipole-dipole interaction.
What are electrostatic forces?Electrostatic forces are forces of attraction or repulsion between particles that are caused by their electrical charge. Electrically charged particles are either positively or negatively charged, and they exert a force on each other that is proportional to the magnitude of their charges, and inversely proportional to the square of the distance between them. Electrostatic forces can be used to explain phenomena such as the attraction of dust particles to surfaces and the clustering of ions in a solution.
To know more about dipole-dipole interaction, visit:
https://brainly.com/question/7545068
#SPJ1
I NEED HELP WITH THIS QUESTION THANK YOU
The mole fraction of the solute in the solution is calculated as 0.1406.
What is non volatile solute?Non-volatile solute is a substance that does not readily evaporate at given temperature and pressure.
Raoult's law : P_total = P_solute + P_water
P_total is total vapor pressure of solution, P_solute is partial pressure of solute, and P_water is partial pressure of water.
Since the solute is non-volatile, we can assume that its partial pressure is negligible compared to the pressure of water. Therefore: P_total ≈ P_water
P_total = X_water * P°_water
X_water is mole fraction of water and P°_water is vapor pressure of pure water at same temperature.
305 torr = X_water * 355.1 torr (since P_total ≈ P_water)
X_water = 305 torr / 355.1 torr = 0.8594
X_solute = 1 - X_water = 1 - 0.8594 = 0.1406
Therefore, the mole fraction of the solute in the solution is 0.1406.
To know more about non volatile solute, refer
https://brainly.com/question/26414694
#SPJ1
At 25 ∘C, the equilibrium partial pressures for the reaction 3A(g)+4B(g)↽−⇀2C(g)+3D(g) were found to be PA=4.62 atm, PB=4.36 atm, PC=4.36 atm, and PD=4.70 atm. What is the standard change in Gibbs free energy of this reaction at 25 ∘C?
Answer: the standard change in Gibbs free energy of the reaction at 25 ∘C is 6.24 kJ/mol.
Explanation: One can employ the equation in order to calculate the standard Gibbs free energy change (ΔG°) for the reaction at a temperature of 25 degrees Celsius.
The standard free energy change, ΔG°, can be expressed as the negative product of the universal gas constant (R), temperature (T) and the natural logarithm of the equilibrium constant (K).
The equilibrium constant is denoted by K and the gas constant R has a value of 8.314 J/mol·K, while T stands for temperature in Kelvin, which is equivalent to 298 K for 25 ∘C.
K can be determined by utilizing the partial pressures at equilibrium.
K equals the square of the product of PC and the cube of PD divided by the cube of PA multiplied by the fourth power of PB.
After replacing the provided values, the result obtained is:
The value of K is obtained by raising 4.36 atm to the power of 2, and 4.70 atm to the power of 3, and then dividing that by the product of 4.62 atm to the power of 3 and 4.36 atm to the power of 4.
The numeric value of K is 0.0786.
We can now compute the value of ΔG° by using the available data.
The change in Gibbs energy under standard conditions is equal to the negative product of gas constant, temperature and natural logarithm of equilibrium constant.
The standard Gibbs free energy change is determined by multiplying the constant of gas by the temperature and natural logarithm of the equilibrium constant.
The value of ΔG° can be expressed as - (8.314 J/mol·K) multiplied by 298 K and -2.547.
The standard free energy change is either 6,237 joules per mole or 6.24 kilojoules per mole.
Fill in the blanks to complete these sentences about rock characteristics.
A rock is an
natural
of minerals.
The
hardness
of a rock is a result of its mineral composition.
Most rocks contain more than one type of
.
The answers are:
accumulationhardnessmineralWhat is mineral?A rock is a naturally occurring collection of minerals, and the kind and quantity of minerals it contains influence its hardness. Quartz, feldspar, mica, and calcite are just a few of the minerals that are present in all rocks. Additionally, rocks may include mineraloids and organic byproducts. Rocks are categorised based on their texture, mineral makeup, and additional features including colour, streak, lustre, and cleavage.
The three rocks are sedimentary, igneous, and metamorphic rocks. Rocks can be utilised in a variety of applications, including building, landscaping, and industrial activities.
A mineral assemblage forms a rock.A rock's mineral makeup determines how hard it is.The majority of rocks contain a variety of minerals.To know more about metamorphic rocks, visit:
https://brainly.com/question/20475194
#SPJ1
PLEASE HELP!!!!!!!!!!!!!!!!!! Oxygen is in the 16th period, and should therefore have a 2- charge. peroxide also has a charge of 2-. Are they supposed to have the same charge? If so in nomenclature, how do I choose which one to use?
Each oxygen atom in peroxide compounds like hydrogen peroxide (H2O2) has an additional electron that it shares with the other oxygen atom in the compound, giving the oxygen a charge of -1.
What is a compound?Any substance comprised of two or more elements that are chemically linked together is known as a compound. A compound's constituent parts are always present in a specific ratio. As an illustration, the substance water (H2O) consists of two hydrogen atoms that are chemically bound to one oxygen atom.
Actually, oxygen belongs to the second period of the periodic table. It can create two covalent bonds with other elements to complete its octet and has six valence electrons.
Each oxygen atom in peroxide molecules like hydrogen peroxide (H2O2) has a charge of -1. This is due to the fact that each oxygen atom in the molecule has an additional electron that it shares with another oxygen atom.
To know more about compound visit:
brainly.com/question/14117795
#SPJ1
Which of these would a chemist most likely study?
why airplanes are able to fly
how rain affects statues
why monkeys have tails
where earthquakes tend to occur
A chemist would most likely study how rain affects statues as it involves analyzing the physical and chemical changes caused by rainfall on different materials, such as metal or limestone.
Explanation:A chemist would most likely study 'how rain affects statues'. This query falls under the domain of chemistry as it involves the study of physical and chemical changes caused by rainfall on different materials. Rainwater, due to the presence of various dissolved gases, can be slightly acidic. When this water comes in contact with statues, especially those made of certain metals or limestone, it can react causing corrosion or weathering, which a chemist would study.
In the case of metal statues, the acidic nature of rainwater can initiate corrosion processes, leading to the gradual degradation of the metal's surface. This phenomenon involves chemical reactions that a chemist is well-equipped to elucidate and study.
For statues crafted from limestone or other calcareous materials, rainwater can cause weathering, a process that involves chemical dissolution and physical erosion. Understanding the chemical intricacies of these reactions falls squarely within the purview of chemistry.
Hence, the study of 'how rain affects statues' inherently encompasses the investigation of the chemical alterations and transformations induced by rainfall, rendering it a quintessential domain of chemistry. This research not only sheds light on the impact of environmental factors on cultural artifacts but also contributes to the broader understanding of chemical interactions in the natural world.
Learn more about Chemistry here:https://brainly.com/question/36629312
#SPJ2
The substances in the table are combined, and Substance 1 loses 40 calories of heat. How many calories of heat will Substance 2
eventually gain?
A 0
B 20
C 40
D 80
Answer:
C: 40.
Explanation:
To answer this question, we need to use the concept of heat transfer and the law of conservation of energy, which states that energy cannot be created or destroyed, only transferred or transformed from one form to another.
When two substances are in contact, heat can flow from one substance to another until they reach thermal equilibrium (i.e., they have the same temperature). In this case, Substance 1 loses 40 calories of heat, which means it gives off 40 calories of heat to Substance 2. Therefore, Substance 2 will gain 40 calories of heat to reach thermal equilibrium.
Therefore, the correct answer is option C: 40.
In the following unbalanced combustion reaction how many grams of C8H18 will react with 24.78g of O2.
7.10 grams of C₈H₁₈ will react with 24.78 g of O₂ in this unbalanced combustion reaction.
What is meant by combustion reaction?Type of chemical reaction that occurs when substance reacts with oxygen gas to produce energy in the form of heat and light is called combustion reaction .
To balance the combustion reaction: C₈H₁₈ + 12.5 O₂ -> 8 CO₂ + 9 H₂O
The coefficients show that 12.5 moles of O₂ are needed to react with 1 mole of C₈H₁₈.
1 mole of O₂ has a mass of 32 g, so 24.78 g of O₂ is:
24.78 g / 32 g/mol = 0.774 mol of O₂
0.774 mol of O₂ / 12.5 mol of O₂/mol of C₈H₁₈ = 0.06192 moles of C₈H₁₈
0.06192 moles of C8H18 x 114.23 g/mol of C₈H₁₈ = 7.10 g of C₈H₁₈
Therefore, 7.10 grams of C₈H₁₈ will react with 24.78 g of O₂ in this unbalanced combustion reaction.
To know more about combustion reaction, refer
https://brainly.com/question/13251946
#SPJ1
Find reaction type and products for each equation please. FIRST CORRECT ANSWERS GETS BRAINLIEST HELP!!!
Reactant: C3H8 + O2 = Product: CO2 + H2O
Reactant: Zn + HCI = Product: ZnCl₂
Reactant: KI + Pb(NO3)2 = Product: KNO3 and PbI2
Reactant: Mg(CIO3)2 = Product: MgCl2 and O2
Reactant: F2 + KBr = Product: KF and Br2
What are chemical reactions?Chemical reactions entail the conversion of one or more substances into novel species, thanks to the breaking and forging of chemical bonds.
Essentially, such transformations involve the reconfiguration of atoms and/or molecules, culminating in distinct chemical and physical attributes contrasting from those of the initial materials.
Learn about chemical reactions here https://brainly.com/question/11231920
#SPJ1
2. For the following reaction, what volume of 1.8M Na2CO3 is needed to react with 10.0L of 0.30M of
AICI3
Write word equations for the following skeleton equations. C2H6 (g) + O2 (g) CO2 (g) +H2O (g)
The word equation for the skeleton chemical equation would be Ethane gas + Oxygen gas -> Carbon dioxide gas + Water vapor.
How to write the word equation ?Described in this reaction, ethane (C2H6) and oxygen (O2) unite to synthesize carbon dioxide (CO2) and water vapor (H2O). The reactants are situated on the left side of the arrow marker, while the products are displayed on the right. All entities specified are presented in the gaseous state as denoted by the (g) symbol.
The word equation for the skeleton chemical reaction C2H6 (g) + O2 (g) -> CO2 (g) + H2O (g) is showcased as follows:
Ethane gas + Oxygen gas -> Carbon dioxide gas + Water vapor
Find out more on word equations at https://brainly.com/question/31549716
#SPJ1
Which of the following choices fits in the blank to complete the equation?
ΔG° = ΔΗ°
OA. + AS
B. + TAS
O C. - AS⁰
.
OD. - TAS
The equation can be written as; ΔG = ΔH - TΔS
What is the equation of the free energy?The equation for the free energy change (ΔG) in a system can be expressed in terms of the enthalpy change (ΔH) and entropy change (ΔS)
The Gibbs free energy equation links changes in enthalpy and entropy that occur during a process to changes in a system's free energy. If G is negative, the process can happen spontaneously and is thermodynamically beneficial.
If G is positive, the process requires an energy input and is not thermodynamically favorable. The system is in equilibrium if G is zero.
Learn more about free energy:https://brainly.com/question/15319033
#SPJ1
Water rolls off a duck's back but thoroughly wets a head of human hair. What do these observations reveal about the chemical nature of these two sur- faces?
Explanation:
The observations that water rolls off a duck's back but thoroughly wets a head of human hair reveal that the surfaces of the duck feathers and human hair have different physical and chemical properties.
Duck feathers have a unique structure that helps them repel water. They are coated in a special oil that makes them hydrophobic, or water-repelling. The oil forms a layer on the surface of the feathers that prevents water from penetrating into the feather structure. Additionally, the feather structure is tightly packed and has a lot of surface curvature, which also helps to prevent water from sticking to the feathers. This is why water rolls off a duck's back.
In contrast, human hair does not have a hydrophobic coating, and its surface is relatively smooth. This means that water can easily stick to the surface of human hair and thoroughly wet it.
Overall, these observations reveal that the chemical nature of the surfaces of duck feathers and human hair are different, and that these differences have a significant impact on how they interact with water.