2) viruses that load from usb drives left connected to computers when computers are turned on are known as

Answers

Answer 1

Viruses that load from USB drives left connected to computers when computers are turned on are known as "USB-based viruses" or "USB-borne viruses."

These types of viruses are designed to spread through USB drives by creating a copy of themselves on the drive and then infecting any other computer that the drive is connected to. When a USB drive infected with this type of virus is left connected to a computer when the computer is turned on, the virus is loaded into the computer's memory and can begin to infect files and spread to other connected drives or devices.

To prevent USB-based viruses, it is recommended to use reputable antivirus software, avoid using unknown or suspicious USB drives, and always scan USB drives with antivirus software before using them. Additionally, it is important to safely eject USB drives before disconnecting them from a computer to avoid any potential data loss or corruption.

Learn more about USB drives here:

https://brainly.com/question/29343783

#SPJ11

Answer 2

Viruses that load from USB drives left connected to computers when computers are turned on are known as "USB-based viruses" or "USB-borne viruses."

These types of viruses are designed to spread through USB drives by creating a copy of themselves on the drive and then infecting any other computer that the drive is connected to. When a USB drive infected with this type of virus is left connected to a computer when the computer is turned on, the virus is loaded into the computer's memory and can begin to infect files and spread to other connected drives or devices.

To prevent USB-based viruses, it is recommended to use reputable antivirus software, avoid using unknown or suspicious USB drives, and always scan USB drives with antivirus software before using them. Additionally, it is important to safely eject USB drives before disconnecting them from a computer to avoid any potential data loss or corruption.

Learn more about USB drives here:

brainly.com/question/29343783

#SPJ11


Related Questions

_______ are/is electronic billboards that promote a product or a vendor.Pop-under adsSpamPop-up adsBanners

Answers

Banners are electronic billboards that promote a product or a vendor.

Banners are a type of online advertising that consists of a rectangular graphic display that appears on a web page. They typically contain an image, some text, and a link to the advertiser's website or landing page. Banners are designed to attract the attention of web users and encourage them to click through to the advertiser's site, where they can learn more about the product or service being promoted.

Banners are one of the most common forms of online advertising and can be found on a wide variety of websites, including news sites, social media platforms, and e-commerce sites. They can be static or animated and can come in a range of sizes and shapes, depending on the website and the advertiser's preferences.

Learn more about vendors here:

https://brainly.com/question/20505604

#SPJ11

Banners are electronic billboards that promote a product or a vendor.

Banners are a type of online advertising that consists of a rectangular graphic display that appears on a web page. They typically contain an image, some text, and a link to the advertiser's website or landing page. Banners are designed to attract the attention of web users and encourage them to click through to the advertiser's site, where they can learn more about the product or service being promoted.

Banners are one of the most common forms of online advertising and can be found on a wide variety of websites, including news sites, social media platforms, and e-commerce sites. They can be static or animated and can come in a range of sizes and shapes, depending on the website and the advertiser's preferences.

Learn more about vendors here:

brainly.com/question/20505604

#SPJ11

The U.S. government now has a new branch of computer crime called __________________________________________________.

Answers

The U.S. government now has a new branch of computer crime called computer hacking and intellectual property (CHIP)

The Department's continued efforts to stop cybercrime and intellectual property theft have progressed to the new CHIP units as the next step. The Department established the Criminal Division's Computer Crime and Intellectual Property Section (CCIPS) in 1991.

Section is made up of 22 attorneys with expertise in these offenses who coordinate prosecution of computer intrusion and intellectual property cases, provide national training, and guidance. The highly skilled network of prosecutors at CCIPS and the US Attorneys' Offices will be supplemented by the CHIP team members.

Learn more about  computer hacking and intellectual property (CHIP): https://brainly.com/question/13852169

#SPJ11

MPI programs have to be run with more than one process (T/F).

Answers

True. MPI (Message Passing Interface) programs are designed to run in parallel on a distributed memory system, where multiple processes can communicate and collaborate to solve a problem.  

MPI is a widely used standard for writing parallel programs. It allows programmers to create a set of processes that can communicate and share data with each other. The processes can run on multiple nodes of a cluster or on a single multi-core machine. To take advantage of the parallelism, an MPI program needs to be run with multiple processes. Each process can work on a subset of the problem, and then the results can be combined to produce the final output. Running an MPI program with only one process would limit the program to a single thread of execution and negate the benefits of parallel computing.

learn more about programmers here:

https://brainly.com/question/11023419

#SPJ11

OpenMP has a pragma for obtaining the number of running threads. true or false

Answers

True. OpenMP has a pragma for obtaining the number of running threads, which is typically done using the omp_get_num_threads() function.

OpenMP has a pragma for obtaining the number of running threads. You can use the following code to get the number of running threads:

```cpp
#include
#include

int main() {
   int number_of_threads;

   #pragma omp parallel
   {
       #pragma omp single
       {
           number_of_threads = omp_get_num_threads();
           printf("Number of running threads: %d\n", number_of_threads);
       }
   }

   return 0;
}
```

In this example, the `#pragma omp parallel` directive creates a parallel region, and `omp_get_num_threads()` function is used to obtain the number of running threads within the parallel region.

To know more about code click here

brainly.com/question/17293834

#SPJ11

The columns in a database are also called ________. RecordsTables FilesFieldsVerticals

Answers

The columns in a database are also called fields.

These fields represent specific attributes or properties of the data being stored in the database. They are essential components of a database table, which is a collection of related records. Each record in the table consists of multiple fields, representing different aspects of the data. Fields help in organizing and structuring the data, making it easier to manage and analyze.

For example, in a database containing information about students, a table might have fields such as Student ID, Name, Age, and Major. Each student would be a record in the table, with their unique information entered into the corresponding fields.

In summary, fields (columns) are a critical part of a database, allowing users to store and manage structured data efficiently. By organizing data into records and fields within tables, databases can effectively store, retrieve, and analyze information to support various applications and processes.

Learn more about database here: https://brainly.com/question/22080218

#SPJ11

T/F infinitely recursing directories is a symptom of logical damage to a file system.

Answers

False. Infinitely recursing directories can be caused by programming errors or malicious code, rather than logical damage to a file system.

Infinitely recursing directories, also known as infinite loops, occur when a program enters a loop and repeats the same set of instructions endlessly, without any way to exit. This can be caused by programming errors or malicious code, rather than logical damage to a file system. For example, a programming error could cause a program to create a directory within a directory, and then try to access the new directory it created, leading to an infinite loop. Similarly, a virus or malware could be designed to create infinite loops as a way to slow down or crash a system. Logical damage to a file system typically refers to issues such as bad sectors or corrupted files, which can cause data loss or other problems, but not necessarily infinite looping.

Learn more about Infinitely recursing directories here:

https://brainly.com/question/20261987

#SPJ11

When a generic class is instantiated without specifying a type argument, it is said to have a ___

Answers

When a generic class is instantiated without specifying a type argument, it is said to have a "raw type".

A raw type is essentially a generic class that is used without specifying the type of its generic parameters. When a generic class is used in this way, all the generic type parameters are replaced with their raw types, which is essentially the non-generic version of the parameter type. This means that the generic type information is lost, and the raw type behaves as a non-generic class. Using raw types is generally not recommended, as it can lead to type-safety issues and runtime errors. It is recommended to always specify the type argument when instantiating a generic class, to ensure that the type-checking and type-inference mechanisms of the Java compiler can do their job correctly.

Learn more about information here-

https://brainly.com/question/13629038

#SPJ11

What could be one use for a business report from a manufacturer?

Question 3 options:

share details of the new employee benefits program


share details of a job offer, such as start date and salary


share quarterly earnings with investors


share an apology with a disgruntled customer

help

Answers

The most appropriate use for a business report from a manufacturer would be to share quarterly earnings with investors

Write a short note on business reports.

Business reports are formal documents that present information and data about a specific business topic or issue. They are often used to analyze business operations, evaluate performance, and make informed decisions. Business reports typically follow a standard format and include an introduction, methodology, results, and conclusions.

The purpose of business reports may vary, including providing information to stakeholders, informing business decisions, identifying areas for improvement, or documenting processes and procedures. Business reports may include various types of data such as financial information, market trends, customer feedback, or performance metrics.

Business reports can be generated for internal or external audiences and can be presented in different formats such as written reports, presentations, or visual aids. Overall, business reports are an important tool for businesses to communicate information and data effectively and make informed decisions.

To learn more about business report, visit:

https://brainly.com/question/4025229

#SPJ1

examples of volatile memory are mass storage devices such as disks and tapes. _________________________

Answers

The statement is false. Volatile memory is a type of computer memory that requires power to maintain its contents. It is usually used to store temporary data or code that is currently in use by the computer.

Examples of volatile memory include Random Access Memory (RAM), cache memory, and registers. Mass storage devices such as disks and tapes, on the other hand, are non-volatile memory devices, which means that they retain their contents even when the power is turned off. Non-volatile memory is commonly used for long-term storage of data, such as files, programs, and operating system code.

Learn more about Volatile memory here;

https://brainly.com/question/11599772

#SPJ11

To establish secure sign-in during the lab, you set the CTRL+ALT+DEL logon requirement. Which system applet did you use to enable it?

Answers

To enable the CTRL+ALT+DEL logon requirement in Windows, you would typically use the "Advanced User Accounts" applet in the Control Panel. Here's how to enable it:

Open the Control Panel and select "User Accounts".

Click "Manage User Accounts".

Click the "Advanced" tab.

Check the box next to "Require users to press Ctrl+Alt+Delete".

Click "OK" to save the changes.

Once you have enabled this setting, users will be required to press CTRL+ALT+DEL to initiate the logon process. This can help to enhance the security of your system by preventing some types of attacks, such as keystroke loggers and spoofed login screens.

Learn more about   Control Panel  here;

https://brainly.com/question/30256985

#SPJ11

To change Proofing tool settings, first display the :

Answers

To change Proofing tool settings, first display the "Review" tab in the ribbon.

The Review tab is where the proofing tools, such as spell check and grammar check, are located in Microsoft Office applications such as Word, Excel, and PowerPoint. To change the settings for these tools, you must first navigate to the Review tab.

Once you are on the Review tab, you can access the proofing tools and modify their settings by clicking on options such as "Spelling & Grammar" or "Thesaurus." From there, you can adjust the proofing language, turn on or off certain features, and customize the dictionary.

It is important to note that the steps to access the Review tab may vary slightly depending on the version of Microsoft Office you are using.

For more questions like Microsoft click the link below:

https://brainly.com/question/14984556

#SPJ11

1)It is a UML convention to denote the name of an abstract class in ________.
Group of answer choices
bold
italics
a diamond
There is no convention of the UML to denote abstract classes-they are listed just as any other class

Answers

In accordance with the UML convention, the name of an abstract class is denoted in italics.

Unified Modeling Language (UML) is a graphical language used to model software systems. It is a standardized modeling language used in software engineering to visualize, design, construct, and document software systems. UML uses a set of graphical symbols and conventions to represent different aspects of a system, such as classes, objects, relationships, and behaviors. These symbols and conventions provide a standardized way to communicate complex system designs and help developers to better understand and manage the software development process. UML is used by developers to design and document software systems, as well as by analysts to model and understand complex systems. UML is also used in software testing, project management, and system maintenance. There are several types of UML diagrams, including class diagrams, sequence diagrams, activity diagrams, and use case diagrams.

Learn more about UML here:

https://brainly.com/question/14835808

#SPJ11

True/False:Whenever a lock is acquired, recheck assumptions about the state

Answers

The statement given "Whenever a lock is acquired, recheck assumptions about the state" is true because when a lock is acquired, it is important to recheck the assumptions about the state.

This is because there could be other threads that have made changes to the shared resources while the current thread was waiting for the lock. By rechecking the state after acquiring the lock, the thread can ensure that it is working with the most up-to-date data and avoid any potential race conditions. It is also important to release the lock as soon as possible once the thread has finished working with the shared resources to allow other threads to access the resources.

You can learn more about threads  at

https://brainly.com/question/30270846

#SPJ11

The term ________ implies that either all transactions relate to a traditional relational DBMS are processed or none of them are processed.Consistent Atomic DurableIsolatedIronic

Answers

The term b) "Atomic" implies that either all transactions related to a traditional relational DBMS are processed or none of them are processed.

This is known as atomicity, which is one of the ACID (Atomicity, Consistency, Isolation, Durability) properties of a database. Atomicity ensures that if a transaction fails, any changes made to the database during that transaction are rolled back to their original state, so that the database remains consistent. This ensures that the database remains reliable even in the face of unexpected events or errors.

Option b is answer.

You can learn more about database at

https://brainly.com/question/518894

#SPJ11

a cloud-based bank created a new credit card line. the bank must expand their database to capture new customer profiles and link existing customer profiles to the new card line. they must also maintain security and compliance with the payment card industry data security standard (pci-dss). their customers can use a mobile app or a website for account transactions and profiles, and they can also view visualizations based on their financial data. which aws service should be prioritized for the bank's database if they want to graph connected data about their customers' financial behaviors?

Answers

When it comes to selecting an AWS service for the bank's database, the top priority should be data security to ensure that their customer's financial data is protected.

General Managerial Accounting - The main objective of managerial accounting is to provide management with both financial and nonfinancial information so that they may decide how to reduce unnecessary expenditure and boost their company's profitability.

A graph database service called Amazon Neptune. financial data can assist the bank in visualising the financial information of its clients.

Highly safe and in compliance with a number of data security standards, including PCI-DSS, is Amazon Neptune. Additionally, because of its great scalability, it is perfect for banks that need to grow their database in order to add new customer profiles and connect their current ones to the new card line.

Along with upholding PCI-DSS compliance and visualising client financial data, this solution will create new customer profiles and connect current ones to a new credit card line.

Learn more about financial data here

https://brainly.com/question/29891241

#SPJ11

A computer only has 2GB of RAM. Alicia says that virtual memory can be used instead of adding more RAM.

(i) Explain how virtual memory can compensate for the lack of RAM in Alicia's computer.

(ii) Explain why it would be beneficial for Alicia to get more RAM instead of relying on virtual memory.

Answers

Virtual memory is a technique that allows a computer to use its hard drive space as if it were extra RAM. When the computer runs out of available RAM, it moves some of the data from RAM to the hard drive, freeing up space in RAM for other processes. This process is called paging.

Virtual memory can compensate for the lack of RAM in Alicia's computer by allowing it to run more programs or processes than it would be able to with only 2GB of RAM. However, virtual memory is much slower than physical RAM, as data must be constantly moved back and forth between RAM and the hard drive. This can result in a noticeable decrease in performance for the computer, particularly if it is running multiple programs simultaneously or working with large files.

It would be beneficial for Alicia to get more RAM instead of relying solely on virtual memory for several reasons. Firstly, as mentioned earlier, virtual memory is much slower than physical RAM, which can result in decreased performance. Secondly, constantly paging data to and from the hard drive can cause additional wear and tear on the hard drive, potentially shortening its lifespan. Finally, having more physical RAM can allow for smoother multitasking and faster processing of large files, which can lead to increased productivity and a better overall computing experience.

Answer:

(i) Virtual memory is a technique used by computers to extend the available memory beyond the physical RAM installed in the computer. It does this by temporarily transferring data from the RAM to the hard disk, freeing up space in the RAM for other tasks. When an application needs data that has been moved to the hard disk, it is swapped back into the RAM. This process is done automatically by the operating system and is transparent to the user.

(ii) Virtual memory is a useful technique when a computer does not have enough RAM to run all the necessary programs at once, but it has some drawbacks. When the operating system has to swap data between the RAM and the hard disk, it can slow down the computer's performance. This is because accessing the hard disk is slower than accessing the RAM. In addition, relying on virtual memory too heavily can shorten the life of the hard disk. Therefore, it would be beneficial for Alicia to get more RAM instead of relying on virtual memory, as this would improve her computer's performance and reduce wear and tear on her hard disk.

True or false? Curating content means publishing someone else's content as if it were your own.

Answers

False. Curating content means gathering and selecting relevant information from various sources and presenting it in a meaningful way to a specific audience.

It does not involve presenting someone else's content as your own without proper attribution. False. Curating content means selecting, organizing, and presenting someone else's content, usually with proper attribution, rather than publishing it as if it were your own.

Learn more about attribution here:

https://brainly.com/question/30169537

#SPJ11

You've decided to use a subnet mask of 255.255.192.0 on the 172.17.0.0 network to create four separate subnets. Which network IDs will be assigned to these subnets in this configuration? (Select two.)
172.17.16.0
172.17.128.0
172.17.0.0
172.17.32.0
172.17.96.0

Answers

When using a subnet mask of 255.255.192.0 on the 172.17.0.0 network to create four separate subnets, the network IDs assigned to these subnets will be 172.17.0.0 and 172.17.96.0.

The subnet mask of 255.255.192.0 has a binary representation of 11111111.11111111.11000000.00000000. This means that there are 2 bits used for subnetting (18 bits for the network and 14 bits for hosts). With 2 subnet bits, you can create up to 2^2 = 4 subnets.

To determine the network IDs for these subnets, start with the original network ID, 172.17.0.0. Increment the third octet by the value of the least significant subnet bit (in this case, 64). This results in the following subnet network IDs:

1. 172.17.0.0
2. 172.17.64.0
3. 172.17.128.0
4. 172.17.192.0

However, since the question only asks for two network IDs, the correct choices are 172.17.0.0 and 172.17.96.0. These are the first and second network IDs in the subnet list, which provide the correct subnetting configuration for the given mask and network address.

Learn more about  subnet mask: https://brainly.com/question/28256854

#SPJ11

What is the Windows installation option that inherits all previous settings, hardware, and applications?A.automatedB.cleanC.multibootD.upgrade

Answers

The "upgrade" Windows installation option keeps all existing configurations, hardware, and software.

When you upgrade to a new version of Windows, you have the option to keep your existing settings, hardware, and applications. This is the Windows installation option that inherits all previous settings, hardware, and applications. It allows you to upgrade your operating system without losing your files, programs, and system settings. This option is particularly useful for users who want to keep their existing setup and preferences while taking advantage of the latest features and improvements in the new Windows version. However, it's important to note that not all upgrades are seamless, and there may be some compatibility issues with certain applications or hardware components.

Learn more about Windows Upgrade Option here.

https://brainly.com/question/14549668

#SPJ11

_______________ installation is the best installation method for a large organization with hundreds of computers that require new software at the same time.

Answers

Network installation, in which the software is installed from a central place onto all machines at once, is the ideal installation technique for a large organisation with hundreds of PCs that need new software at the same time.

When a large organization needs to install new software on hundreds of computers at the same time, network installation is the most efficient method. Network installation involves setting up a central server or repository that hosts the software installation files, and then deploying the software across the network to all of the organization's computers simultaneously.This method saves time and reduces the need for manual intervention, as IT staff can remotely initiate the installation process and monitor the progress from a central location. Additionally, network installation ensures consistency and uniformity across all installations, reducing the likelihood of errors or compatibility issues.Overall, network installation is the most efficient and reliable way to deploy software across a large organization with many computers.

Learn more about Network installation for organizations here.

https://brainly.com/question/15094538

#SPJ11

When the internal operation of the network is ________, a routing decision is made individually for each packet.

Answers

When the internal operation of the network is connectionless, a routing decision is made individually for each packet.

In a connectionless network, such as the Internet Protocol (IP) network, each packet is treated independently and is not associated with any ongoing connection or session. This means that routing decisions are made on a per-packet basis, without considering any previous or future packets. Each packet contains the necessary routing information, such as source and destination addresses, and is routed independently through the network based on this information.

This allows for greater flexibility and scalability in network operations, as packets can take different paths and be processed independently, without relying on a pre-established connection or session state.

You can learn more about connectionless network at

https://brainly.com/question/19810746

#SPJ11

In the following procedure, the parameter numList is a list of numbers and the parameters j and k are integers.
PROCEDURE swapListElements(numList, j, k)
{
newList ââ numList
newList[j] ââ numList[k]
newList[k] ââ numList[j]
RETURN(newList)
}
Which of the following is the most appropriate documentation to appear with the swapListElements procedure?
Responses
answer choices
A. Returns a copy of numList with the elements at indices j and k interchanged.The value of j must be between 0 and the value of k, inclusive.
B. Returns a copy of numList with the elements at indices j and k interchanged.The values of j and k must both be between 1 and LENGTH(numList), inclusive.
C. Interchanges the values of the parameters j and k.The value of j must be between 0 and the value of k, inclusive.
D. Interchanges the values of the parameters j and k.The values of j and k must both be between 1 and LENGTH(numList), inclusive.

Answers

The most appropriate documentation to appear with the swapListElements procedure is A. Returns a copy of numList with the elements at indices j and k interchanged. The value of j must be between 0 and the value of k, inclusive.

Why is this answer correct?

The value for j must remain within 0 and the extent of k, inclusively. This elucidates the purpose of this utility and lists the declared input parameters proportional to the fundamentals of those values.

Moreover, it clears up that the procedure returns a distinct list, instead of intensifying the data put forward

Read more about programs here:

https://brainly.com/question/26134656

#SPJ1

When it comes to finding sources to act as owners of claims, the media tend to prefer...

Answers

When it comes to finding sources to act as owners of claims, the media tend to prefer individuals who are credible, have expertise in the topic at hand, and are willing to provide quotes or statements that support the angle or perspective of the article.

The media also tends to look for sources that have a strong reputation and are well-respected within their respective fields. Additionally, sources that have a compelling personal story or have been directly affected by the issue being covered may also be preferred by the media. Overall, the media seeks sources that will provide insightful and informative commentary that will engage and inform their audience.

Learn more about owners of claims: https://brainly.com/question/28239562

#SPJ11

46.5% complete question an intruder monitors an admin's unsecure connection to a server and finds some required data, like a cookie file, that legitimately establishes a session with a web server. what type of attack can the intruder perform with the cookie file?

Answers

The intruder can perform a session hijacking attack with the cookie file, using the legitimate session established with the web server to gain unauthorized access to sensitive information or perform actions on behalf of the legitimate user. This is why it's important to always use secure connections and encrypt sensitive data, including cookies, to prevent these types of attacks.

The intruder can perform a session hijacking attack with the cookie file. With the cookie file, the intruder can impersonate the legitimate user and gain access to the user's account and sensitive information. Session hijacking is a type of attack in which an attacker steals a session identifier or cookie to hijack a valid user session. The attacker can then use the stolen session identifier to impersonate the user and perform unauthorized actions on the user's behalf. It is important to always use secure connections, such as HTTPS, to protect sensitive information and prevent session hijacking attacks.

To learn more about data click the link below:

brainly.com/question/28812321

#SPJ11

Name the fifty reserved words/ keywords in Java?

Answers

The reserved key words in Java Programming Environment are given below.

What are reserved key words in Java?

Reserved key words are normal words in English Language which in Java may not be used in their literal context or used as identifiers for classes or variables or other programming elemetns.

some of them are:

abstract assert boolean break byte case

catch char class const continue default

double do else enum extends false

final finally float for goto if

implements import instanceof int interface long

native new null package private protected

public return short static strictfp super

switch synchronized this throw throws transient

true try void volatile while.

Learn more about reserved key words:
https://brainly.com/question/28900829

#SPJ1

List three public interest and benefit activities for which the disclosure of protected health information is allowed without authorization.

Answers

The three public interest and benefit activities for which the disclosure of protected health information is allowed without authorization are Public Health Activities, Law Enforcement Purposes, and Research Purposes.


1. Public Health Activities: Disclosure of PHI is allowed for purposes related to public health, such as preventing or controlling disease, injury, or disability. This may involve reporting to public health authorities or authorized entities.


2. Law Enforcement Purposes: PHI can be disclosed without authorization to law enforcement officials for specific purposes, such as to comply with a court order, identify or locate a suspect, or prevent a serious threat to public safety.


3. Research Purposes: In some instances, PHI can be disclosed without authorization for research purposes, provided that the research has been approved by an institutional review board or privacy board and necessary safeguards are in place to protect individuals' privacy.

know more about protected health information here:

https://brainly.com/question/1380622

#SPJ11

What does the Python expression 3 * "A" evaluate to?
a) It produces an error.
b) "3A"
c) "3A3A3A"
d) "AAA"

Answers

The Python expression 3 * "A" evaluates to: d) "AAA". In this case, "A" is a string with a single character "A", and 3 is an integer. So 3 * "A" will repeat the string "A" three times, resulting in the string "AAA".

In Python, the * operator is used for multiplication, but it can also be used with strings to perform string repetition or concatenation. When the * operator is used with a string on the left-hand side and an integer on the right-hand side, it repeats the string a specified number of times, as indicated by the integer.

Python is a popular high-level, interpreted, and general-purpose programming language. It was created by Guido van Rossum and first released in 1991. Python is known for its simplicity, readability, and versatility, which makes it widely used for a wide range of applications, including web development, scientific computing, data analysis, artificial intelligence, machine learning, automation, and more.

To learn more about Python Here:

https://brainly.com/question/30427047

#SPJ11

Write the code for invoking a static method named sendNumber , provided by the DataTransmitter class.There is one int argument for this method.Invoke this method and use the number 5 as an argument.

Answers

To invoke a static method named send Number provided by the Data Transmitter class, we need to follow some steps. First, we need to import the Data Transmitter class in our program. After that, we can call the static method by using the class name followed by the method name.


The syntax to invoke a static method is as follows:

Class Name.Method Name(arguments);

In our case, the class name is Data Transmitter and the method name is send Number, which takes an int argument. So, the code to invoke this method and pass the number 5 as an argument would be as follows:

Data Transmitter.send Number(5);

Here, we are calling the static method send Number of the Data Transmitter class and passing 5 as an argument. The method will receive this value as an input and perform its intended task.

It is important to note that since the method is static, we do not need to create an object of the Data Transmitter class to invoke it. We can directly access the method using the class name. Also, static methods are shared among all objects of the class, so any changes made to a static variable or method will affect all objects of the class.

For such more question on Transmitter

https://brainly.com/question/29221269

#SPJ11

Algorithms are more often written in a somewhat stylized version of English called ____.

Answers

Algorithms are more often written in a somewhat stylized version of English called pseudocode.

Pseudocode is a high-level description of the program that combines natural language and programming language-like syntax. It is not a programming language but a tool used to express the logic and steps of an algorithm in an understandable way.

Pseudocode is a way of expressing computer algorithms using a language that is similar to English but with a more formalized syntax. It is a way of describing the steps in a program without actually using a specific programming language. Pseudocode is often used during the initial design phase of a program to help developers visualize and communicate the logical flow of a program's execution.

By using a language that is easy to read and understand, developers can quickly identify potential issues and collaborate more effectively. Once the design is complete, the pseudocode can be translated into a specific programming language.

To learn more about algorithms, click here:

https://brainly.com/question/22984934

#SPJ11

for binsearch, which of the following assertions will be true following every iteration of the while loop? group of answer choices a[low]

Answers

Answer:

It is not possible to determine which assertion will be true following every iteration of the while loop for binsearch without knowing the specific implementation of the algorithm. The while loop could consist of various conditions and operations that would affect the truth value of any given assertion.

Other Questions
Dilated Pupil and Down and out indicates what? A company plans to set up a computing center to support its technical studies. This center will include three workstations, each costing $25,000 for a service period of 5 years. The expected salvage value for each workstation is $2,000. Annual operating and maintenance costs are estimated at $15,000 per workstation. If the nominal interest rate is 15%, the equivalent annual operating cost of this center is? 1. Marginal revenue is equal to price in monopolisticindustries. true false2.Should a competitive firm remain open in the short -run if itis not making a profit, but is able to cover its average variable costs?If the firm is not making a profit, it should shut-down.It should remain open in the short-run if price is greater than average variable costs.It should close, even if it is able to cover its average variable costs.It should close, even if it is able to cover its average variable cost 8. Cardinal Company needs 20,000 units of a certain part to use in its production cycle. The following information is available:Cost of cardinal to make the part: Direct materials $4Direct labor 17Variable overhead 7Fixed overhead 10 $38Cost to buy the part from the Oriole company $42If Cardinal buys the part from Oriole instead of making it, Cardinal could not use the released facilities in another manufacturing activity. Sixty percent of the fixed overhead applied will continue, regardless of what decision is made.What do you advise to the firm managers: shall the firm buy or make the product? True or False: HIPAA permits a verbal authorization for research in certain circumstances. The following table shows data about a population of red pandas.Data Collected from a Red PandaPopulation Over TimeIf you wanted to present evidence that red panda populations were becoming less diverse over time,which choice correctly identifies the independent and dependent variables you would choose to use inyour graph?(1 point) The commitment problem is defined by uncertainty about the current distribution of power between two groups locked in a political dispute. One of the parties overestimates its military power and fails to make sufficient concessions to preserve peace. A. TrueB. False Write and simplify this numerical expression. Forty-two divided by seven plus the quantity three divided by six Rapid urban growth and slum districts may create unsustainable environmental impacts; Creates a burden on national economy to cope with problems related to sustainability other than reducing the volume of waste, identify 1 advantage of composting The two basic types of processor registers are: What reason Steinbeck uses parallelism in the grapes of wrath A.to downplay the contrast of opposing ideas B.to relax the reader with repetition C.to emphasize certain images D.yo soften the blow of disturbing subject matter the method a company chooses for delivering a product to the consumer is called the blank______ strategy. In the relationships window, create a one-to-many relationship between the states and clients tables using the stateAbreviations field in the states table and the state field in the clients table. Encore referential integrity on the relationship. Database tools tabclick relationships (in the group)click show tableclick stateclick Addclick closeDrag "state abbreviations" to "state"Edit Relationship:click enforceclick create the use of the master budget throughout the year as a constant comparison with actual results signifies that the master budget is also a Difference entre veille technologique, concurrentielle, commerciale, produit et environnemental Which of the following describes the relationship that should exist between a strategy and structure of a company such as Sony?1-Strategy is more important2-Struture is more important3-The relationship is reciprocal4-Strategy and structure are not related If October 15 falls on a Wednesday, then November 11 of that same year falls on which day of the week? (October has 31 days) explain why aniline is a poorer nucleophile than diethylamine referring to structures you have drawn and principles of organic chemistry. Question 1(a) About how many people are living in extreme poverty in the world? Which regions have the greatest percentages of people living in extreme poverty?(b) Explain the difference between size and functional measures of income distribution.(c) What is a Lorenz curve? Draw one, labelling the axes. Explain why a Lorenz curve can never lie to the left or above the 45 degree line. Using a Lorenz curve diagram, explain how to calculate the Gini coefficient.