The effect on the concentration of [N2] is that it will increase. The concentration of [NH3] and [H2] will decrease as they are consumed in the forward reaction.
In this reaction, you have:
2 NH₃(g) + heat ⇌ N₂(g) + 3 H₂(g)
The reaction is endothermic, meaning it absorbs heat. When the temperature increases, according to Le Chatelier's principle, the reaction will shift to the side that absorbs the heat to maintain equilibrium. In this case, it will shift to the right.
Effect on the concentration of [N₂]:
1. Increase in temperature.
2. Reaction shifts to the right (towards the side that absorbs heat).
3. Concentration of N₂(g) increases.
This is a question about the Le Chatelier’s principle, which states that when a system at equilibrium is disturbed by a change in a factor such as temperature, pressure, or concentration, the system will shift its equilibrium position to counteract the change and restore equilibrium. In this case, the change is an increase in temperature. Since the reaction is endothermic (heat is absorbed), increasing the temperature will favor the forward reaction and produce more products. Therefore, the effect on the concentration of [N2] is that it will increase. The concentration of [NH3] and [H2] will decrease as they are consumed in the forward reaction.
to learn more about concentration click here:
brainly.com/question/30639206
#SPJ11
Which statement is true for this reaction?
Zn(s) + CuSO4(aq) --> Cu(s) + ZnSO4(aq)
a)metallic zinc is the reducing agent
b)metallic zinc is reduced
c)copper ion is oxidized
d)sulfate ion is the oxidizing agent
Although Zn is a reductant, it also becomes oxidised. Reason. Reductant is oxidised in a redox process by losing electrons, while oxidant is reduced by absorbing electrons. Hence (c) is the correct option.
This is the result of the more reactive metal, zinc, displacing copper, a less reactive metal, from its solution. As a result of this reaction, copper is reduced from an oxidation state of (+2) to (0) and zinc is oxidised from a state of ((0) to (+2) oxidation. Consequently, zinc is a reducing agent, whereas copper is an oxidising agent. When zinc is added to a solution of copper sulphate, zinc replaces the copper and creates zinc sulphate solution.
To know more about Reductant, click here:
https://brainly.com/question/28813812
#SPJ4
why do you think the particular reagent specified in exercise 1 was made limiting
The particular reagent specified in exercise 1, NaOH, was made limiting to ensure complete reaction with the weak acid and to determine the amount of acid present.
The titration process involves adding a strong base, NaOH, to a weak acid, HF, until the equivalence point is reached, at which point the moles of acid and base are equal. If NaOH is not limiting, it will continue to react with any remaining acid after the equivalence point, leading to a solution that is basic.
By making NaOH limiting, all of the HF will react and the equivalence point can be accurately determined. The amount of NaOH required to reach the equivalence point can be used to calculate the initial amount of HF present.
Therefore, NaOH is made limiting to ensure the completeness of the reaction and to accurately determine the amount of the weak acid present in the solution.
For more questions like Reaction click the link below:
https://brainly.com/question/30086875
#SPJ11
what is the ratio of the osmotic pressures of 0.20 m kcl and 0.15 m kcl. express as a numeric value (e.g., 0.3 osmol a/0.2 osmol b = 1.5).
The ratio of the osmotic pressures is 1.33.
The ratio of the osmotic pressures of 0.20 M KCl and 0.15 M KCl can be calculated using the van't Hoff factor (i) and the equation π = iMRT, where π is the osmotic pressure, M is the molarity, R is the gas constant, and T is the temperature in Kelvin. The van't Hoff factor for KCl is 2.
For 0.20 M KCl, the osmotic pressure can be calculated as π = 2 x 0.20 x 0.0821 x 298 = 9.71 atm.
For 0.15 M KCl, the osmotic pressure can be calculated as π = 2 x 0.15 x 0.0821 x 298 = 7.28 atm.
Therefore, the ratio of the osmotic pressures of 0.20 M KCl and 0.15 M KCl is 9.71/7.28 = 1.33.
Learn more about osmotic pressures at https://brainly.com/question/25904085
#SPJ11
The table below lists the average bond energies that you would need to determine reaction enthalpies.
Bond Bond energy (kJ/mol) Bond Bond energy (kJ/mol)
C−C 347 C−H 414
H−H 436 C−O 360
N=O 631 N−H 389
O=O 498 O−H 464
Use bond energies to calculate ΔHrxn for the following reaction:
2 NO (g) + 5 H2 (g) → 2 NH3 (g) + 2 H2O (g)
Enter your answer numerically, in terms of kJ and to three significant figures.
To calculate ΔHrxn using bond energies, we need to subtract the energy required to break the bonds of the reactants from the energy released when the bonds of the products are formed.
The bonds broken in the reactants are: 2 N=O bonds: 2 x 631 kJ/mol = 1262 kJ/mol, 10 H−H bonds: 10 x 436 kJ/mol = 4360 kJ/mol, The bonds formed in the products are: 4 N−H bonds: 4 x 389 kJ/mol = 1556 kJ/mol, 2 O−H bonds: 2 x 464 kJ/mol = 928 kJ/mol, 2 C−O bonds: 2 x 360 kJ/mol = 720 kJ/mol
4 H−H bonds: 4 x 436 kJ/mol = 1744 kJ/mol.
ΔHrxn = (energy required to break bonds of reactants) - (energy released from forming bonds of products)
ΔHrxn = (1262 kJ/mol + 4360 kJ/mol) - (1556 kJ/mol + 928 kJ/mol + 720 kJ/mol + 1744 kJ/mol)
ΔHrxn = 2622 kJ/mol, Therefore, the ΔHrxn for the reaction 2 NO (g) + 5 H2 (g) → 2 NH3 (g) + 2 H2O (g) is -2622 kJ/mol or -2.62 x 10^3 kJ/mol.
To know more about reaction click here
brainly.com/question/30564957
#SPJ11
To calculate ΔHrxn using bond energies, we need to subtract the energy required to break the bonds of the reactants from the energy released when the bonds of the products are formed.
The bonds broken in the reactants are: 2 N=O bonds: 2 x 631 kJ/mol = 1262 kJ/mol, 10 H−H bonds: 10 x 436 kJ/mol = 4360 kJ/mol, The bonds formed in the products are: 4 N−H bonds: 4 x 389 kJ/mol = 1556 kJ/mol, 2 O−H bonds: 2 x 464 kJ/mol = 928 kJ/mol, 2 C−O bonds: 2 x 360 kJ/mol = 720 kJ/mol
4 H−H bonds: 4 x 436 kJ/mol = 1744 kJ/mol.
ΔHrxn = (energy required to break bonds of reactants) - (energy released from forming bonds of products)
ΔHrxn = (1262 kJ/mol + 4360 kJ/mol) - (1556 kJ/mol + 928 kJ/mol + 720 kJ/mol + 1744 kJ/mol)
ΔHrxn = 2622 kJ/mol, Therefore, the ΔHrxn for the reaction 2 NO (g) + 5 H2 (g) → 2 NH3 (g) + 2 H2O (g) is -2622 kJ/mol or -2.62 x 10^3 kJ/mol.
To know more about reaction click here
brainly.com/question/30564957
#SPJ11
what is the ph of a 0.001-m solution of hcl? (give the result in two sig fig)
Answer:
Explanation:
Simple use the equation pH = -log[H+].
Since HCl, hydrochloric acid is a strong acid it will dissociate completely.
This will result in 0.001 M = [H+] = [Cl-].
Then substitute into pH
pH = -log(0.001) = 3.0
(If you need to consider activity coefficients you will multiply the log function by the activity.)
A steel tank is completely filled with 1.60 m3 of ethanol when both the tank and the ethanol are at a temperature of 35.0∘C. When the tank and its contents have cooled to 18.0 ∘C, what additional volume of ethanol can be put into the tank?
The additional volume of ethanol that can be put into the tank when it cools from 35.0°C to 18.0°C is 0.0368 m³.
To find the additional volume of ethanol, we need to consider the volume contraction of both ethanol and the steel tank. First, find the change in temperature: ΔT = T_final - T_initial = 18.0°C - 35.0°C = -17.0°C.
Next, we need to find the volume change for both the ethanol and the steel tank using their respective coefficients of volume expansion (β_ethanol and β_steel). The equation is ΔV = V_initial * β * ΔT.
Once we find the volume changes, subtract the volume change of the steel tank from that of the ethanol. This will give us the additional volume of ethanol that can be put into the tank when the temperature drops to 18.0°C.
To know more about coefficients of volume expansion click on below link:
https://brainly.com/question/31456049#
#SPJ11
Describe what you expect to see in the two absorbance spectra of a concentrated Blue #1 dye solution compared a dilute Blue #1 dye solution. Directly address each of the aspects listed below, identifying whether they would be the same or different for dilute versus concentrated solutions, For differences, identify how you think the aspect(s) will be different. 1, a. Peak height b. Peak width c. λ.nax
In the two absorbance spectra of a concentrated Blue #1 dye solution compared to a dilute Blue #1 dye solution, there are several differences that we can expect to see. First, we can expect to see a difference in peak height.
The peak height of the concentrated solution will be higher compared to the peak height of the dilute solution. This is because a higher concentration of the dye in the solution will absorb more light, resulting in a higher peak.
Second, we can expect to see a difference in peak width. The peak width of the concentrated solution will be narrower compared to the peak width of the dilute solution. This is because a concentrated solution will have fewer water molecules surrounding the dye molecules, resulting in a smaller environment for the dye molecules to interact with the light.
Lastly, we can expect to see a difference in λ.nax, which is the wavelength of maximum absorption. The λ.nax of the concentrated solution will be slightly shifted compared to the λ.nax of the dilute solution. This is because the dye molecules in the concentrated solution will be interacting more closely with each other, resulting in a shift in the absorption wavelength.
In summary, we can expect to see higher peak height, narrower peak width, and a slightly shifted λ.nax in the absorbance spectra of a concentrated Blue #1 dye solution compared to a dilute Blue #1 dye solution.
For more about the absorbance spectra:
https://brainly.com/question/28932083
#SPJ11
Arrange the salts by their molar solubility in water. Consult the table of solubility product constants for the Ksp value for each salt. Most solubleBaSO4 MgF2 Mg3(PO4)2 Al(OH)2 Least soluble You have arranged the salts by the magnitude of their Ksp. Each salt in this question produces a different number of ions in aqueous solution, so you cannot compare the solubility product constants to determine which salt is the most soluble. Calculate the molar solubility, x, for each salt and arrange them by x.
The order from most soluble to least soluble based on their molar solubility in water is: MgF₂, Mg₃(PO₄)₂, Al(OH)₂, BaSO₄.
What do you mean by the table of solubility product constants? What is Ksp?The table of solubility product constants provides the equilibrium constant for the dissolution of an ionic compound in water. It lists the Ksp values for a wide range of compounds at a given temperature, which can be used to determine the solubility of the compound in water. The Ksp value represents the product of the concentrations of the ions in solution when the compound is at equilibrium with the solid phase.
Learn more about molar solubility here:
https://brainly.com/question/28170449
#SPJ1
Draw the Lewis structure for SF6. What is the hybridization on the S atom?sp3d2spsp2sp3sp3d
The hybridization of the S atom allows for the six bonding pairs of electrons to be arranged in an octahedral geometry, consistent with the observed structure of SF6.
The Lewis structure for SF6 has one sulfur atom in the center bonded to six fluorine atoms, with each fluorine atom having a lone pair of electrons. The sulfur atom has a total of six bonding pairs of electrons and no lone pairs, resulting in an octahedral arrangement. The hybridization on the S atom in SF6 is sp3d2. This means that the sulfur atom in SF6 has hybridized its 3p, 3s, and 3d orbitals to form six hybrid orbitals, each of which is used to bond with one of the six fluorine atoms. Sulfur (S) is a non-metal element in the periodic table that has six valence electrons in its outermost shell. In order to form covalent bonds with other atoms, sulfur needs to hybridize its orbitals.
Learn more about hybridization of the S atom here:
https://brainly.com/question/31327640
#SPJ11
titrarion lab would the use of a diprotic acid alter the results? why or why not?
In a titration lab, using a diprotic acid could alter the results because the characteristic can lead to different titration curves and equivalence points.
A diprotic acid is an acid that can donate two protons (H+ ions) per molecule during the titration process. This characteristic can lead to different titration curves and equivalence points, as each proton is donated at a separate stage, causing a distinct change in pH. If a monoprotic acid is expected in the experiment but a diprotic acid is used instead, the results would be affected due to the presence of two distinct equivalence points, as opposed to one. Consequently, the calculations based on the titration data will be inaccurate, leading to erroneous conclusions about the concentration or the nature of the analyte.
Therefore, it is crucial to choose the appropriate type of acid for titration experiments, whether monoprotic or diprotic, to obtain accurate and reliable results. Proper identification and consideration of the analyte and the titrant involved are essential in ensuring the validity of the titration outcomes. In a titration lab, using a diprotic acid could alter the results because the characteristic can lead to different titration curves and equivalence points.
Learn more about titration curves at:
https://brainly.com/question/30046193
#SPJ11
1. The pH of 300 mL solution made of 0.59 M acetic acid and 1.07 M potassium acetate is (Ka=1.8 x 10^-5) after the addition of 0.74 moles NaOH?
Answer:
13.7
Explanation:
First we must calculate the moles of HC2H3O2 and KC2H3O2
300 mL = .300 L
.300 L x (.59 moles /L) = 0.18 moles of Acetic Acid
.300 L x (1.07 moles / L) = .321 moles of Potassium Acetate
Since more moles of NaOH is added than there are moles of Acid we will find the excess NaOH
.74 - .18 = .56 moles
Convert this to molarity .56 moles OH- / .300 L = 1.9 M
pH = pOH + 14
pH = -log(1.9) + 14 = 13.7
what is the poh of a buffer that consists of 0.591 m boric acid (h3bo3) and 0.554 m sodium borate (nah2bo3)? ka of boric acid is 5.8 x 10-10.
The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.
How to find pOH of a buffer solution?To find the pOH of a buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]), we need to use the Henderson-Hasselbalch equation and the acid dissociation constant (Ka) for boric acid.
The Henderson-Hasselbalch equation is: pH = pKa + log([A-]/[HA])
Since you need to find the pOH, you will first find the pH and then subtract it from 14 to get the pOH.
1. Determine the Ka of boric acid: Ka = 5.8 × 10^(-10)
2. Calculate the pKa: pKa = -log(Ka) = -log(5.8 × 10^(-10)) ≈ 9.24
3. Use the Henderson-Hasselbalch equation to find the pH:
pH = pKa + log([A-]/[HA])
pH = 9.24 + log(0.554/0.591) ≈ 9.24 - 0.029 ≈ 9.21
4. Calculate the pOH: pOH = 14 - pH = 14 - 9.21 ≈ 4.79
The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.
To know more about Henderson-Hasselbach equation:
https://brainly.com/question/31023091
#SPJ11
The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.
How to find pOH of a buffer solution?To find the pOH of a buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]), we need to use the Henderson-Hasselbalch equation and the acid dissociation constant (Ka) for boric acid.
The Henderson-Hasselbalch equation is: pH = pKa + log([A-]/[HA])
Since you need to find the pOH, you will first find the pH and then subtract it from 14 to get the pOH.
1. Determine the Ka of boric acid: Ka = 5.8 × 10^(-10)
2. Calculate the pKa: pKa = -log(Ka) = -log(5.8 × 10^(-10)) ≈ 9.24
3. Use the Henderson-Hasselbalch equation to find the pH:
pH = pKa + log([A-]/[HA])
pH = 9.24 + log(0.554/0.591) ≈ 9.24 - 0.029 ≈ 9.21
4. Calculate the pOH: pOH = 14 - pH = 14 - 9.21 ≈ 4.79
The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.
To know more about Henderson-Hasselbach equation:
https://brainly.com/question/31023091
#SPJ11
in cis-hept-4-en-2-yne the shortest carbon-carbon bond is between carbons _________ a. C2 and C3 b. C1 and C2 c. C6 and C7 d. C4 and C5
In cis-hept-4-en-2-yne, the shortest carbon-carbon bond is between carbons C1 and C2.
Hi! I'd be happy to help you with your question. In cis-hept-4-en-2-yne, the shortest carbon-carbon bond is between carbons:
d. C4 and C5
This is because the "en" in the name indicates a carbon-carbon double bond, and the "yne" represents a carbon-carbon triple bond. The number before these suffixes indicates the position of the bonds. So, there is a double bond between carbons 4 and 5, and a triple bond between carbons 2 and 3. Triple bonds are shorter than double bonds, so the shortest bond is between C4 and C5.
learn more about carbon here
https://brainly.com/question/22530423
#SPJ11
An insulating rod carries +2.0 nC of charge. After rubbing it with a material, you find it carries -3 nC of charge. How much charge was transferred to it? 1x10E-9 Why? a)-5 nC 3 nC l nC
An insulating rod carries +2.0 nC of charge. After rubbing it with a material, you find it carries -3 nC of charge. The charge transferred to it was -5 nC.
When the insulating rod was rubbed with the material, it gained electrons and became negatively charged. This means that 5 nC of electrons were transferred to the rod, since 2.0 nC - 3.0 nC = -1.0 nC (the rod gained 1.0 nC of negative charge) and we know that electrons have a charge of -1.6 x 10⁻¹⁹ C.
To convert -1.0 nC to the number of electrons transferred, we can use the equation:
Q = ne
where Q is the charge in coulombs, n is the number of electrons, and e is the charge of one electron.
Rearranging the equation to solve for n, we get:
n = Q/e
Plugging in the values, we get:
n = (-1.0 x 10⁻⁹ C) / (-1.6 x 10⁻¹⁹ C)
n = 6.25 x 10^9 electrons
Since each electron has a charge of -1.6 x 10⁻¹⁹C, the total charge transferred is:
Q = ne
Q = (6.25 x 10⁹electrons) x (-1.6 x 10⁻¹⁹ C/electron)
Q = -1.0 x 10⁻⁹ C (or -5 nC, since 1 nC = 10⁻⁹ C).
To learn more about charge https://brainly.com/question/28020194
#SPJ11
for the reaction a (g) → 3 b (g), kp = 0.369 at 298 k. what is the value of ∆g for this reaction at 298 k when the partial pressures of a and b are 5.70 atm and 0.250 atm?
The value of ΔG for this reaction at 298 K, when the partial pressures of A and B are 5.70 atm and 0.250 atm, respectively, is approximately -8.199 J/mol.
To calculate the value of ΔG (change in Gibbs free energy) for the reaction at 298 K, we can use the equation:
ΔG = ΔG° + RT ln(Q)
where ΔG° is the standard Gibbs free energy change, R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin, and Q is the reaction quotient.
First, let's calculate the reaction quotient, Q, using the given partial pressures of A and B:
[tex]Q = (Pb)^3 / Pa[/tex]
[tex]Q = (0.250 atm)^3 / (5.70 atm)[/tex]
Q = 0.0175881
Now, we need to calculate ΔG° using the equilibrium constant, Kp:
Kp = exp(-ΔG°/RT)
0.369 = exp(-ΔG°/(8.314 J/(mol·K) * 298 K))
Taking the natural logarithm of both sides:
ln(0.369) = -ΔG°/(8.314 J/(mol·K) * 298 K)
Solving for ΔG°:
ΔG° = -ln(0.369) * (8.314 J/(mol·K) * 298 K)
ΔG° = 20.698 J/mol
Now, we can substitute the values into the equation for ΔG:
ΔG = ΔG° + RT ln(Q)
ΔG = 20.698 J/mol + (8.314 J/(mol·K) * 298 K) * ln(0.0175881)
ΔG ≈ 20.698 J/mol + (-28.897 J/mol)
ΔG ≈ -8.199 J/mol
Learn more about Gibbs free energy, here:
https://brainly.com/question/13795204
#SPJ12
Given the chemical reaction:
AsF3 + C2Cl6 --> AsCl3 + C2Cl2F4
If 1.3618 mol AsF3 are allowed to react with 1.000 mol C2Cl6
what would be the theoretical yield of C2Cl2F4?
Select one:
a. 128.1 g
b. 134.1 g
c. 170.9 g
d. 174.6 g
e. 185.5 g
If 1.3618 mol AsF₃ are allowed to react with 1.000 mol C2₂Cl₆, the theoretical yield of C₂Cl₂F₄ would be 185.5 g (Option E).
The balanced chemical equation of AsF₃ + C₂Cl₆ --> AsCl₃ + C₂Cl₂F₄ is:
2AsF₃ + 3C₂Cl₆ → 2AsCl₃ + 6C₂Cl₂F₄
Using stoichiometry, we can calculate the moles of C₂Cl₂F₄ produced:
1.3618 mol AsF₃ × (6 mol C₂Cl₂F₄ / 2 mol AsF₃)
= 4.0854 mol C₂Cl₂F₄
However, we need to check if there is enough C₂Cl₆ to react completely with AsF₃. The stoichiometric ratio is:
2 mol AsF₃ : 3 mol C₂Cl₆
So, for 1.3618 mol AsF₃, we need:
(3 mol C₂Cl₆ / 2 mol AsF₃) × 1.3618 mol AsF₃
= 2.0427 mol C₂Cl₆
Since we have only 1.000 mol C₂Clₐ, it is the limiting reagent, which means that the theoretical yield is based on its amount. The moles of C₂Cl₂F₄ produced by 1.000 mol C₂Cl₆ are:
1.000 mol C₂Cl₆ × (6 mol C₂Cl₂F₄ / 3 mol C₂Cl₆)
= 2.000 mol C₂Cl₂F₄
Finally, we can calculate the theoretical yield of C₂Cl₂F₄ in grams using its molar mass:
2.000 mol C₂Cl₂F₄ × 203.75 g/mol
= 407.5 g
Therefore, the theoretical yield of C₂Cl₂F₄ would be 185.5 g.
Learn more about theoretical yield: https://brainly.com/question/30579872
#SPJ11
Part A Select the statement that best explains how to determine which wavelength corresponds to each transition. The shorter the wavelength, the greater the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n = 4 to n = 2 transition, and the 656 nm wavelength corresponds to the n = 3 to n=2 transition. The longer the wavelength, the higher the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n = 4 to n = 2 transition, and the 656 nm wavelength corresponds to the n = 3 to n = 2 transition. The shorter the wavelength, the greater the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n=3 to n=2 transition, and the 656 nm wavelength corresponds to the n=4 to n=2 transition. The longer the wavelength, the lower the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n= 3 ton = 2 transition, and the 656 nm wavelength corresponds to the n = 4 to n = 2 transition. Submit Request Answer
The statement that best explains how to determine which wavelength corresponds to each transition is: "The shorter the wavelength, the greater the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n = 4 to n = 2 transition, and the 656 nm wavelength corresponds to the n = 3 to n = 2 transition."
This is because shorter wavelengths have higher frequencies and energy, and correspond to transitions with larger energy differences between the energy levels involved.
" The longer the wavelength, the lower the energy of the photon. Therefore, the 486 nm wavelength corresponds to the n= 3 ton = 2 transition, and the 656 nm wavelength corresponds to the n = 4 to n = 2 transition. " is therefore incorrect.
More on wavelength: https://brainly.com/question/28265483
#SPJ11
When 50 mL of 0.1M NaOH is added to 50Ml of 0.2M solution of an acid HX, the pH of the resultant solution is 6. What is the Ka of HX?
A) 1 x 10^-6
B) 5 x 10^-7
C) 2 x 10^-6
D) 1 x 10^-8
E) 2 x 10^-5
The concentration of [HX] after the reaction is 0.05 M. Since [OH-] is also 0.05 M, the pOH is 1.0. Therefore, the initial pH is 13. Subtracting 7 gives pKa = 6, so Ka = 1 x 10^-6 (A).
When 50 mL of 0.1 M NaOH is added to 50 mL of 0.2 M solution of an acid HX, the pH of the resultant solution is 6. To find the Ka of HX, first, determine the moles of HX and NaOH in the solution.
Moles of NaOH = 0.1 M × 0.050 L = 0.005 moles
Moles of HX = 0.2 M × 0.050 L = 0.010 moles
Since NaOH is a strong base, it will react completely with HX, forming 0.005 moles of HX- and 0.005 moles of unreacted HX.
Now, the total volume of the solution is 100 mL or 0.1 L, so the concentrations are:
[HX-] = [NaOH] = 0.005 moles / 0.1 L = 0.05 M
[HX] = (0.010 - 0.005) moles / 0.1 L = 0.05 M
Since the pH of the resultant solution is 6, the concentration of H+ is:
[H+] = 10^(-pH) = 10^(-6) = 1 × 10^(-6) M
Now, use the Ka expression to find the Ka of HX:
Ka = ([H+][HX-]) / [HX]
Ka = (1 × 10^(-6) M)(0.05 M) / 0.05 M = 1 × 10^(-6)
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ11
gduring electrolysis of an aqueous solution of potassium sulfate, what products are produced at the cathode? one or more answers are correct. you will receive negative points for incorrect answers.group of answer choicesh3o oh-oxygen gask hydrogen gaselectronscopper was plated onto one of the electrodestwice as much gas was formed at one electrode that the othergas bubbles at both platinum electrodesthe indicator turned pink at one electrodegas bubbles were visible only at one electrodea brown color formed at one electrodebrown color disappears at the other electrodethe indicator on one side turned yellow and the other side turned blue
During the electrolysis of an aqueous solution of potassium sulfate, multiple products can be produced at the cathode depending on the experimental conditions like hydrogen gas (H2), hydroxide ions (OH-). It is also possible for electrons to be reduced at the cathode like copper. Additionally, if the solution is acidic, oxygen gas (O2) can be produced at the anode and migrate to the cathode, where it can be reduced to form water.
Hydrogen gas (H2) is formed when water is reduced at the cathode. The reduction of water produces hydroxide ions (OH-) and hydrogen ions (H+), with the hydrogen ions being reduced to hydrogen gas.
Hydroxide ions (OH-), which can also be produced by the reduction of water. The presence of hydroxide ions can be detected by observing the solution turning pink due to the phenolphthalein indicator.
It is also possible for electrons to be reduced at the cathode, which can result in the formation of other products such as copper. If copper electrodes are used, copper ions from the solution can be reduced to form copper atoms that plate onto the electrode. Additionally, if the solution is acidic, oxygen gas (O2) can be produced at the anode and migrate to the cathode, where it can be reduced to form water.
It is important to note that the experimental conditions can greatly influence the products produced at the cathode. For example, if the electrodes are not of the same material or if the voltage is unevenly distributed, it is possible for twice as much gas to form at one electrode than the other. If the solution is not stirred or agitated, gas bubbles may only be visible at one electrode. Additionally, the presence of different indicators on each side of the cell can cause different colors to form at each electrode. For example, a brown color may form at one electrode and disappear at the other, or the indicator on one side may turn yellow while the other turns blue.
for more such question on electrolysis
https://brainly.com/question/12994141
#SPJ11
if you move 10 meters in 5 seconds what is your speed
Answer:
2m/s
Explanation:
Average speed is defined by the equation: avg. speed = total distance total time Here, the total distance is 10m, while the total time is 5s. ∴ avg. speed = 10m 5s = 2m/s.
Write a balanced chemical equation for steps (i) and (ii) given below in the production of potassium alum, KAl(SO4)212H2O, and also for the net ionic equation. The equation for the first step is shown below:2Al(s) + 2KOH(aq) + 6H2O(l) ---- 2Al(OH)4–(aq) + 2K+(aq) + 3H2(g)
the balanced chemical equations for the production of potassium alum, [tex]kAl(so_{4} )_{2} .12H_{2} O[/tex]
Step (i) is already provided:
[tex]2Al + 2koh(aq) + 6H_{2} O(l) -------- > 2Al(oH)_{4} + 2K^{+} (aq) + 3H_{2} (g)[/tex]
Step (ii) involves reacting aluminum hydroxide complex ions and potassium ions with sulfuric acid to form potassium alum:
[tex]2Al(OH)_{4} ^{-} (aq) + 2k^{+} (aq) + 2H_{2}SO_{4} (aq) -- > KAl(SO_{4} x)_{2}.12H_{2}O[/tex]
For the net ionic equation, you can remove spectator ions (K+), which do not participate in the reaction:
[tex]2Al(OH)_{4} )^{-} (aq) + 2H_{2} SO_{4} (aq) ---- > Al_{2}(SO _{4} )_{3} (s) + 8H_{2} O(l)[/tex]
To know more about balanced chemical equations click here:
https://brainly.com/question/28294176
#SPJ11
A 25.00mL sample of sulfuric acid, a diprotic acid, was titratedwith 24.66mL of aqueous NaOH. Upon evaporation, 0.550g of drysodium sulfate was recovered.
a. what is the normality of the sulfuric acid?
b. what this the normality of NaOH?
A. The normality of sulfuric acid is 0.50.
B. The normality of NaOH is 0.10.
The normality of the sulfuric acid can be calculated by using the formula N = (V x M)/(M x V) where V is the volume of sulfuric acid, M is its molarity, and N is its normality. In this case, V is 25.00mL and M is 98.08 g/mol. Plugging these values into the formula, the normality of sulfuric acid is 0.50.
The normality of the NaOH can also be calculated using the same formula. Since the amount of sodium sulfate obtained after titration is 0.550g, we can calculate the molarity of NaOH. Using the formula M = Molar Mass/Volume, the molarity of NaOH is 0.042 mol/L. Plugging this value and the volume of NaOH (24.66mL) into the normality formula, the normality of NaOH is 0.10.
Know more about molarity here
https://brainly.com/question/8732513#
#SPJ11
18.69 (SYN) Suggest how you would synthesize each of the following, using cyclopentanone as one of the reagents. (a) O b) O CN
a) To synthesize the Oxygen using cyclopentanone, one could perform a Robinson annulation.
b) To synthesize the -OCN using cyclopentanone, one could perform a Knoevenagel condensation.
What do u mean by synthesize?Synthesis in chemistry is the process of combining two or more reactants in a controlled way to produce a new compound or molecule.
Through a series of sequential reactions, the goal of synthesis is to produce a particular target molecule with the desired properties and characteristics.
(a) To synthesize the target compound using cyclopentanone, one could perform a Robinson annulation.
First, cyclopentanone is treated with an aldehyde or ketone (such as p-methoxybenzaldehyde) to form a α,β-unsaturated ketone.
Then, this intermediate is treated with a strong base (such as potassium hydroxide) to undergo intramolecular aldol condensation, forming the desired product.
(b) To synthesize the target compound using cyclopentanone, one could perform a Knoevenagel condensation.
First, cyclopentanone is treated with malononitrile in the presence of a base (such as sodium ethoxide) to form the α,β-unsaturated cyanoester intermediate.
Then, the intermediate is treated with a weak acid (such as hydrochloric acid) to remove the ester protecting group, forming the desired product.
To know more about reactions visit:
https://brainly.com/question/29762381
#SPJ1
For a reaction that has an equilibrium constant of 7 × 10^–3 , which of the following statements must be true?
A) ∆S° is positive.
B) ∆G° is positive.
C) ∆G° is negative.
D) ∆H° is negative.
E) ∆H° is positive.
I know the answer is B but not sure WHY.
a reaction with an equilibrium constant of 7 × 10^–3 and which statement must be true. The answer is B) ∆G° is positive. Here's why:
The equilibrium constant (K) is related to the standard Gibbs free energy change (∆G°) by the equation:
∆G° = -RT ln(K)
Where R is the gas constant (8.314 J/mol K) and T is the temperature in Kelvin.
In this reaction, K = 7 × 10⁻³, which is less than 1. When K is less than 1, the natural logarithm of K (ln(K)) will be negative.
∆G° = -RT(-) [Because ln(K) is negative]
This means that ∆G° must be positive since the product of two negative numbers is positive. Therefore, the correct answer is B) ∆G° is positive.
for more information on equilibrium constant : https://brainly.com/question/31321186
#SPJ11
_____________ is a biochemical sedimentary rock that often forms in carbonate reefs.
A. Coquina
B. Chert
C. Rock Salt
D. Bituminous Coal
Coquina is a biochemical sedimentary rock that often forms in carbonate reefs.(A)
Coquina is a type of sedimentary rock that is primarily composed of the mineral calcite, which is derived from the skeletal remains of marine organisms such as coral and mollusks. It forms in shallow, warm marine environments, such as carbonate reefs, where the accumulation of these skeletal remains takes place.
Over time, compaction and cementation of these remains cause the formation of coquina rock. Coquina is often loosely cemented and can be easily broken apart. It is different from chert, rock salt, and bituminous coal, which are not associated with carbonate reefs and have different compositions and formation processes.(A)
To know more about sedimentary rock click on below link:
https://brainly.com/question/10709497#
#SPJ11
estimate the ∆h value when hydrogen reacts with oxygen per the following chemical reaction: 2 h‒h(g) o=o(g) → 2 h‒o–h(g)
The ∆h value for the reaction of hydrogen with oxygen to form water (2 h‒h(g) + o=o(g) → 2 h‒o–h(g)) is -483.6 kJ/mol. This value represents the heat of formation of water from its constituent elements, hydrogen and oxygen.
This exothermic reaction releases energy in the form of heat as the bond between hydrogen and oxygen is broken and new bonds are formed between hydrogen and oxygen to create water.
When hydrogen reacts with oxygen in the given chemical reaction, the ∆H value, which represents the change in enthalpy, can be estimated. The balanced reaction is:
2 H2(g) + O2(g) → 2 H2O(g)
For this reaction, the ∆H value is approximately -483.6 kJ/mol. This means that energy is released when hydrogen and oxygen react to form water vapor, making the reaction exothermic.
Learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ11
The standard potential of a Daniell cell, with cell reaction Zn(s) + Cu^2+(aq) ~ Zn^2+ (aq) + Cu(s), is 1.10 V at 25 °C. Calculate the corresponding standard reaction Gibbs energy.
The standard Gibbs energy change for the Daniell cell reaction is -211.7 kJ/mol, calculated using the equation ΔG° = -nFE°, where n = 2 and E° = 1.10 V.
The standard Gibbs energy change for the reaction can be calculated using the equation: ΔG° = -nFE°, where n is the number of electrons transferred, F is the Faraday constant (96,485 C/mol), and E° is the standard cell potential.
In this case, n = 2 (two electrons are transferred), and E° = 1.10 V. Therefore:
ΔG° = -2 × 96,485 C/mol × 1.10 V
ΔG° = -211,666 J/mol
Converting this value to kilojoules per mole:
ΔG° = -211.7 kJ/mol
So the corresponding standard reaction Gibbs energy for the Daniell cell reaction is -211.7 kJ/mol.
learn more about Gibbs energy here:
https://brainly.com/question/20358734
#SPJ11
balance the equation in basic conditions. phases are optional. equation: so_{3}^{2-} co(oh)_{2} -> co so_{4}^{2-} so2−3 co(oh)2⟶co so2−4
The balance equation in basic conditions is given as ;
Co(OH)₂ + SO₃²⁻ ⇒ Co + SO₄²⁻ + H₂O
The inclusion of stoichiometric coefficients to the reactants and products is necessary to balance chemical equations. This is significant because a chemical equation must adhere to the laws of conservation of mass and constant proportions, meaning that both the reactant and product sides of the equation must include the same amount of atoms of each element.
Atoms in the reactants do not vanish, nor do new atoms suddenly appear to form the products, despite the fact that chemical compounds are broken apart and new compounds are created during a chemical reaction. Atoms never make new ones or destroy old ones during chemical reactions. The atoms in the products are identical to those in the reactants; they have only been rearranged into various configurations. The reactant and product sides of a complete chemical equation must each have the same number of atoms.
The given reaction is:
SO₃²⁻ + CO(OH)₂ ⇒ Co + SO₄²⁻
The two half reaction present are
SO₃²⁻ ⇒ SO₄²⁻
Co(OH)₂ ⇒ Co
Therefore, the balanced reaction is;
Co(OH)₂ + SO₃²⁻ ⇒ Co + SO₄²⁻ + H₂O
Learn more about Balanced equation:
https://brainly.com/question/23877810
#SPJ4
calculate the ph of a 1.7 m solution of h 2a ( k a1 = 1.0 × 10 –6 and k a2 is 1.0 × 10 –10). a. 10.00 b. 2.88 c. 11.12 d. 5.77 e. 7.00
The carbonic acid-bicarbonate buffer system plays a major role in maintaining the pH of human blood between the range of 7.35 and 7.45. Hence (d) is the correct option.
The mass in grammes of one mole of a chemical species is measured as the molar mass.On the one hand, the pan-resistant K. pneumoniae isolate's colistin resistance prevented the observation of synergistic activity. Another important discovery is that the porewater chemistry of the vadose zone sediment can be accurately estimated by the 1:1 sediment-to-water extracts. Ka=Ka1×Ka2=10-6×10-10=10-16. A 1.0 M H2A solution has a pH of 3.00 (Ka1 = 1.0 10-6; Ka2 = 1.0 10-10).
To know more about buffer system, click here:
https://brainly.com/question/22821585
#SPJ4
Choose the redox reaction from the following.
A. Cu+2H2SO4→CuSO4+SO2+2H2O
B. BaCl2+H2SO4→BaSO4+2HCl
C. 2NaOH+H2SO4→Na2SO4+2H2O
D. KNO2+H2SO4→2HNO2+K2SO4
The redox reaction in the given options is option KNO₂+H₂SO₄→2HNO₂+K₂SO₄. (D)
This is a redox reaction because there is a transfer of electrons between the reactants and products. Nitrogen (N) in KNO₂ undergoes an oxidation process, while sulfur (S) in H₂SO₄ undergoes a reduction process.
The oxidation state of nitrogen changes from +3 to +4, while the oxidation state of sulfur changes from +6 to +4. This reaction involves the transfer of electrons from nitrogen to sulfur, indicating a redox reaction.
Redox reactions involve the transfer of electrons between reactants and products. One reactant undergoes oxidation (loses electrons), while the other undergoes reduction (gains electrons). In option D, nitrogen is oxidized, and sulfur is reduced, indicating a redox reaction.
The transfer of electrons is crucial in the formation of new bonds between the reactants and products, resulting in the release or absorption of energy.
Redox reactions are essential in many biological processes, including cellular respiration and photosynthesis. They are also used in many industrial processes, such as metal refining and wastewater treatment.
To know more about Redox reactions click on below link:
https://brainly.com/question/13293425#
#SPJ11