Answer:
Activator effects a mixture if you put to much of the activator your using into a product or thing you are using.
Explanation:
For ex.
If you poor to much activator into slime it will make the slime hard and very wet it will ruin your slime completely so you will have to do it just right but start off pouring it slowly and mix and then more if it needs more.
A sample of O2 with an initial temperature of 50.0 oC and a volume of 105 L is cooled to -25 oC. The new pressure is 105.4 kPa and the new volume is 55.0 L. What was the initial pressure of the sample? Show your work, using the G.U.E.S.S. method.
Answer:
71.92 kPa
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (kPa)
P2 = final pressure (kPa)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
T1 = 50°C = 50 + 273 = 323K
V1 = 105L
T2 = -25°C = -25 + 273 = 248K
P2 = 105.4 kPa
P1 = ?
V2 = 55.0 L
Using P1V1/T1 = P2V2/T2
P1 × 105/323 = 105.4 × 55/248
105P1/323 = 5797/248
0.325P1 = 23.375
P1 = 23.375 ÷ 0.325
P1 = 71.92 kPa
Compared to the energy released per mole of reactant during chemical reactions, the energy
released per mole of reactant during nuclear reactions is
1.
much less
2.
much greater
3.
slightly less
4.
slightly greater
Answer:
2. much greater
The statement, that describes the energy released per mole of reactant during nuclear reactions is "much greater."
What are nuclear reactions?Nuclear reaction is a sort of reaction in which the structure of an atom's nucleus changes completely, frequently producing a different element while releasing energy.
The energy released by nuclei is far more dense (approximately a million times more dense) than the energy released by atom interactions (chemical reactions). This is what gives nuclear weapons their extraordinarily huge and destructive force when compared to conventional weapons. Nuclear reactions generate more energy than chemical reactions.
Hence the correct option is 2.
Learn more about nuclear reaction here
https://brainly.com/question/12786977
#SPJ2
HELP ASAP!!! #2 only please.
Answer:
friend me on here and imma send you the link Explanation:
Suppose the galvanic cell sketched below is powered by the following reaction:
Mg(s)+Zn(NO3)2(aq) → Mg(NO3)2(aq)+Zn(s)
Explanation:Mg(s)+Zn(NO3)2(aq) → Mg(NO3)2(aq)+Zn(s)
What is the concentration of hydrogen ions in a solution with a pH of 2.36?
Question 24 options:
a)
7.34x10-2 M
b)
4.37x10-3 M
c)
1x102.36 M
d)
6.95x10-3 M..
Answer:
b)
Explanation:
[tex]pH = - log[H {}^{ + } ] \\ 2.36 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 2.36} \\ [H {}^{ + } ] = 4.37 \times {10}^{ - 3} \: M[/tex]
What is the molarity of a solution made from dissolving 3.0 moles of KCl in 500 mL of solution?
A. 750 M KCl solution
B. 3.0 M KCl solution
C. 0.06M KCl solution
D. 6M KCl solution
Answer:
najah zggs haihß hajoa ha8 a an àjàhajß
Which radiation detection device is the best to use for measuring the presence of radiation in large moving objects where constant monitoring is impossible?
film badge
Geiger counter
cloud chamber
scintillation counter
Answer:
A film badge
Explanation:
The film badge dosimeter or film badge is a personal dosimeter used for monitoring cumulative radiation dose due to ionizing radiation. It of a photographic film and a holder. This film badge is used to determine or measure and record the radiation exposure as a result of radiations, x-rays, gamma rays and also beta particles.
All users of medical x-ray equipment (C-arms, fluoro units, therapy units) must wear badges. Those using larger quantities of radioactive materials will also be provided badges. The correct option is A.
What is film badge?Ionising radiation exposure is measured using photographic film for personnel monitoring purposes. A filter that protects part of the film from particular types of radiation may also be present in the film badge, which may contain two or three films with varying sensitivity levels.
A particular kind of passive dosimeter is the film badge. It comprises of a photographic emulsion film in a light-tight wrapping (kept in a holder) that changes optical density in response to ionising radiation. The holder, which also includes several filters (for calculating tissue equivalent amounts), is typically worn on the body's trunk.
So film badge is the device used most commonly today for monitoring the radiation exposure of personnel.
Thus the correct option is A.
To know more about film badge, visit;
https://brainly.com/question/14019863
#SPJ7
I’d appreciate the help! :)
Here is the reaction:
3 NO2 (g) + H2O (l) = 2HNO3 (l) + NO (g)
Answer: 300g
Explanation:
first we write the given values on top
224L. x
3 NO2 (g) + H2O (l) = 2HNO3 (l) + NO (g)
22.4L 30g
then we form a formula
224L/22.4L= x/30g
224*30/22.4
6720/22.4= 300g
Mallory combines two chemicals and notices that each chemical retains its original properties. What did Mallory form?
O a mixture
a compound
an element
an atom
Answer:
A mixture
Explanation:
The process that is used by organisms to convert complex organic molecules into carbon dioxide and water molecules, with an overall release of energy is
1 photosynthesis
2 Plants
3 cellular respiration
4 Calorie
In hospitals, staff members wear shoes with special soles to prevent build up of static charge as they walk. Why?Single line text.
Answer:
The correct answer is - sudden static charge could damage sensitive medical equipment.
Explanation:
Staff members of a hospital or medical institution wear special shoes that are able to prevent static charge as they walk. These shoes help to prevent static charge as we know that the sudden transfer of a static charge to medical equipment may alter the reports or damage sensitive equipment. This type of static charge is negative or positive due to electronic devices touches the device leads to damage of electric devices.
Thus, the correct answer is - sudden static charge could damage sensitive medical equipment.
calculate the pressure at which the volume of oxygen becomes tripled. if it initial volume at 3.00 atm at 75cm³. if temperature is constant.
Help me
I'll give brainiest
Answer:
The new pressure is equal to 1 atm.
Explanation:
Given that,
Initial pressure, P₁ = 3 atm
Initial volume, V₁ = 75cm³
Final volume, V₂ = 3V₁ = 225 cm³
We need to find the final pressure. The mathematical relation between P and V is :
[tex]P\propto \dfrac{1}{V}\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}[/tex]
Where
V₂ is the new volume
So,
[tex]P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{3\times 75}{225}\\\\P_2=1\ atm[/tex]
So, the new pressure is equal to 1 atm.
Polar bonds share electrons _______.
29.) What charge would you expect from a Group 1 atom when it becomes an ion?
a.) 2-
b.) 2+
c.) 1-
d.) 1+
Answer:
d
Explanation:
It is 1+ because when the periodic table is drawn well into there groups become cations
(2-2) Looking at the chemical formula CaF2 (calcium fluoride), what do you think this substance is made of? (Choose ALL that apply
Metal
Metalloid
Non-metal
Answer:
Metal
Non-metal
Explanation:
Ionic compounds are said to be formed when metals donate electrons to non metals.
The metals become positively charged while the nonmetals become negatively charged.
CaF2 is composed of Ca^2+ and F^-. Calcium is a metal of group 2 in the periodic table while F is a nonmetal of group 17 in the periodic table.
Hence CaF2 is composed of a metal and a nonmetal.
28. Which of the following reactions at equilibrium would NOT be affected by volume
changes at constant temperature?
a. 2 CO(g) + O2(e) < > 2 CO2(g)
b. 2 NO2(g) → N2048)
c. 2 NO(g) + 3 F2(g) → 2 F3NO(e)
d. O3(e) + NO(g) + > NOzle) +
e. None of the above.
Ozig)
Answer:
Explanation:
is the
Inicialmente una muestra de neón tiene un volumen de 2,50 L a 15 °C. ¿Cuál es la
temperatura en °C, cuando el volumen de la muestra cambia a cada uno de los
siguientes volúmenes, ¿manteniéndose la presión constante?
a. 5,0 L b. 1250 ml c. 7,50L d. 3550 ml
naoooooooo seiiiiiiiii !!!!!!!!!!!!!!
calculate the amount of hydrogen sulphide that would be liberated by the action of sulphuric acid on 4.4 gram of ferrous sulphide. (Fe=56;S=32)
You will get iron sulfate and hydrogen sulfide gas (a.k.a. rotten egg gas).
FeS + H2SO4 = FeSO4 + H2S(g)
Change in Free Energy: ΔG(20C) = -66.6kJ (negative, so the reaction runs)
Change in Enthalpy: ΔH(20C) = -37.3kJ (negative, so the reaction is exothermic)
We'll begin by writing the balanced equation for the reaction between ferrous sulphide (FeS) and sulphuric acid (H₂SO₄). This is illustrated below:
FeS + H₂SO₄ —> H₂S + FeSO₄
Next, we shall determine the mass of FeS that reacted and the mass of H₂S produced from the balanced equation. This is illustrated below:
Molar mass of FeS = 56 + 32
= 88 g/mol
Mass of FeS from the balanced equation = 1 × 88 = 88g
Molar mass of H₂S = (2×1) + 32
= 2 + 32
= 34 g/mol
Mass of H₂S from the balanced equation = 1 × 34 = 34 g
SUMMARYFrom the balanced equation above,
88 g of FeS reacted to produce 34 g of H₂S.
Finally, we shall determine the mass of H₂S produced by the reaction of 4.4 g of FeS. This can be obtained as follow:
From the balanced equation above,
88 g of FeS reacted to produce 34 g of H₂S.
Therefore, 4.4 g of FeS will react to produce = (4.4 × 34)/88 = 1.7 g of H₂S.
Thus, 1.7 g of H₂S were obtained from the reaction.
Learn more: https://brainly.com/question/23115234
10 ejemplos de disoluciones identificando el soluto y el solvente y el tipo de disolucion que corresponde
Answer:
hije51k 5jk45679349fjvokhffgpv9ü
Which of the following sequence is correct for the oxidation of alcohol?
A. Ethanol-Ethanal-Ethanoic acid
B. Ethanol-Ethanoic acid- Ethanal
C. Ethanal-Ethanol-Ethanoic acid
D. Ethanal-Ethanoic acid-Ethanol
Can someone answer question 3 ASAP please
Answer:
Molecules must collide with sufficient energy, known as the activation energy, so that chemical bonds can break. Molecules must collide with the proper orientation. A collision that meets these two criteria, and that results in a chemical reaction, is known as a successful collision or an effective collision.
The balanced equation for the combustion of Hexane,C6H14 , is
Answer:
[tex]2C _{6}H _{14} + 19O _{2}→12CO _{2} +14H _{2} O[/tex]
Polar bears are adapted to stay warm by growing thick fur. These organisms most likely live in a what
Answer:
They live in the open snow
Explanation:
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation:
Help me with chemistry! I got this answer wrong , what would be the right one?
Answer: Number 3
Explanation: Electronegativity is a measure of how strongly atoms attract bonding electrons to themselves.
I think, I could be wrong though.
Examine the food chain below: In this specific food chain, the _______ eats plants for food. A. caterpillar B. sunshine C. bobcat D. leaf
HELP ASAP
Which BEST explains the
relationship between the greenhouse
effect and global warming?
global warming causes the
greenhouse effect
greenhouse effect decreases
global warming
greenhouse effect increases
global warming
greenhouse effect is the same
as global warming
Answer:
greenhouse effect is the same as global warming
Explanation:
they both mean warming of the earths surface
ZnSO4 +
+
LINO, → ---- Zn(NO3)2
+
Li,SO4
Balanced equation
Answer:
ZnSO4 + 2LiNO3 → Zn(NO3)2 + Li2SO4
Explanation:
There's many resources on web that can assist you with this concept:
https://en.intl.chemicalaid.com/tools/equationbalancer.php
https://www.webqc.org/balance.php
What is the molarity of a solution that is composed of 10 grams of Sodium Chloride ( NaCl) dissolved in 3.50 L of water
Answer: The molarity of solution will be 0.049 M
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (L)}}[/tex]
We are given:
Given mass of sodium chloride = 10 g
Molar mass of sodium chloride = 58.44 g/mol
Volume of solution = 3.50 L
Putting values in above equation:
[tex]\text{Molarity of NaCl}=\frac{10 g}{58.44g/mol\times 3.50}\\\\\text{Molarity of NaCl}=0.049M[/tex]
Hence, the molarity of solution will be 0.049 M
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)