Answer:
When water vapor in the air comes into contact with something cool, such as the outside of a cold glass of water, its molecules slow down and get closer together. When that happens, the gaseous water vapor turns back into liquid water droplets. That's condensation.
A liquid containing 55.0 wt% methanol (M), 5.00 wt% polyacrylate (P), and 40.0 wt% water (W) is distilled at steady-state into a top steam and a bottom stream. The total mass flow rates of the top and bottom streams are the same. The top stream has 85.0 wt% M and 0% P. a. Can you set a basis of calculation in this problem? Why or why not? b. Calculate the composition (mass fractions) in the bottom stream.
Answer:
a) YES ( Basis : F=100kg/h)
b) composition mass fraction in the bottom stream
(Xm)B = 0.25
(Xp)B = 0.1
(Xw)B = 0.65
Explanation:
a)
Can you set a basis of calculation in this problem? Why or why not?
Yes we can set a basis if calculation in this problem.
A good basis makes the calculation more easier. the problem are given in weight basis so we can choose basis of feed rate of 100kg/h
BASIS : 100kg/h
b)
given that;
mass flow rate of M in the feeds Mf = 0.55*F = 0.55*100 = 55kg/h
mass flow rate of p in the feeds Pf = 0.05*F = 0.05*100 = 5kg/h
mass flow rate of W in the feeds Pf = 0.40*F = 0.40*100 = 40kg/h
Now Balance
F = T + B
( but T=B)
so F = T + T = 2T
B = T = 50kg/h
TOP
mass flow rate of M in the top Mt = 0.85*T = 0.85*50 = 42.5 KG/H
mass flow rate of P in the top Pt = 0kg/h
mass flow rate of W in the top Wt = 0.15*T = 0.15*50 = 7.5kg/h
balance on M
Mf = Mt + Mb
Mb = Mf - Mt = 55kg/h - 42.5kg/h = 12.5kg/h
Balance on P
Pf = Pb + Pt
Pb = Pf - Pt = 5kg/h - 0kg/h = 5kg/h
Balance on W
Wf = Wt + Wb
Wb = Wf - Wt = 40kg/h - 7.5kg/h = 32.5kg/h
So bottom composition
mass fraction of M in Bottom XmB = Mb/B = (12.5kg/g) / (50kg/h) = 0.25
mass fraction of P in Bottom XpB = Pb/B = (5kg/g) / (50kg/h) = 0.1
mass fraction of W in Bottom XwB = Wb/B = (32.5kg/g) / (50kg/h) = 0.65
A 60.04 g sample of a compound of carbon, sulfur, hydrogen and oxygen is burned completely. Calculate the empirical formula if 44.8 L of water at STP and 88.0 g of CO2 is formed. In another experiment, a 15.00 g sample of the compound produced 1.00L SO2 at 25.0 oC and 3.05 atm. In a final experiment: 3.57 L of the compound at 2.33 atm and 25 o C weighted 35.0g Find the molecular formula of the compound.
Answer:
Empirical formula: C₂SH₄
Molecular formula: C₄S₂H₈
Explanation:
The empirical formula is the simplest whole ratio of atoms presents in an element.
The compound contains C, S and H, its empirical formula is CₐSₓHₙ. We need to determine a, x and n solving for the moles of each element, thus:
Moles H₂O - moles H-:
PV/RT = n
At STP, P is 1atm, and T is 273.15K:
1atm*44.8L / 0.082atmL/molK*273.15K
moles H₂O = 2 moles water = 4 moles of H
Because 1 moles of water contains 2 moles of H
Moles CO₂ = moles C:
88.0g CO₂ * (1mol / 44g) = 2 moles CO₂ = 2 moles C
The mass of carbon is:
2 moles * (12g/mol) = 24g
Mass of hydrogen:
4 moles * (1g/mol) = 4g
The mass of S is:
60.04g - 24g - 4g = 32.04g = 1 mole of S
Empirical formula is:
C₂SH₄Now, the moles of the compound in the final experiment are:
PV / RT = n
2.33atm*3.57L / 0.082atmL/molK*298.15K = 0.34 moles
-25°C = 298.15K. In gas laws you must use absolute temperature given in Kelvin-
These moles are in 35.0g. The molar mass of the compound is:
35.0g / 0.34 moles = 102.9g/mol
As the empirical formula is C₂SH₄ and weighs 60g/mol. Twice the empirical formula are the molecular formula:
C₄S₂H₈The Molecular formula of the compound: C₄S₂H₈
Empirical formula:It is the simplest whole number ratio of atoms present in a compound.The compound contains C, S and H, its empirical formula is CₐSₓHₙ. We need to determine a, x and n solving for the moles of each element, thus:Moles of H₂O= Moles of H:[tex]n=\frac{PV}{RT}[/tex]
At STP, P is 1atm, and T is 273.15K:
[tex]n= \frac{1atm*44.8L}{0.082atmL/molK*273.15K}[/tex]
Moles H₂O = 2 moles water = 4 moles of H
As, 1 moles of water contains 2 moles of H
Moles of CO₂ = Moles of C:88.0g CO₂ * (1mol / 44g) = 2 moles CO₂ = 2 moles C
We know,
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
Mass of carbon is: [tex]2 moles * (12g/mol) = 24g[/tex]
Mass of hydrogen is: [tex]4 moles * (1g/mol) = 4g[/tex]
Mass of sulphur is: [tex]60.04g - 24g - 4g = 32.04g[/tex] = 1 mole of S
The derived Empirical formula will be: C₂SH₄
Now, the moles of the compound in the final experiment are:
[tex]n= \frac{PV}{RT}\\\\n=\frac{2.33atm*3.57L}{0.082atmL/molK*298.15K}\\\\ n= 0.34 moles[/tex]
These moles are in 35.0g. The molar mass of the compound is: [tex]\frac{35.0g}{0.34 moles} =102.9g/mol[/tex]
As the empirical formula is C₂SH₄ and weighs 60g/mol.
The empirical formula is two times the molecular formula: C₄S₂H₈
Find more information about "Molecular formula" here:
brainly.com/question/1603500
Oxidation state of N in n2(g)
Answer:
0
Explanation:
did research
Which phrase best describes the outer planets?
rocky with few moons
gaseous with slow rotations
dense with few moons
gaseous with low density
Answer: D. Gaseous with low density
Explanation: Took the test :)
Answer:
gaseous with low density
Explanation:
Please help need ASAP!!! Due tonight,
Name the Compounds. Spelling counts
SiCl4
N2O4
Answer:
Silicon tetrachloride
Dinitrogen tetroxide
The name of the compound SiCl₄ is named silicon tetrachloride and N₂O₄ is named dinitrogen tetroxide.
SiCl₄ is named silicon tetrachloride. It is composed of one silicon atom (Si) bonded to four chlorine atoms (Cl). The prefix "tetra-" indicates the presence of four chlorine atoms bonded to the central silicon atom.
N₂O₄ is named dinitrogen tetroxide. It consists of two nitrogen atoms (N) bonded to four oxygen atoms (O). The prefix "di-" indicates the presence of two nitrogen atoms, and the suffix "-tetraoxide" indicates the presence of four oxygen atoms.
Learn more about compound here:
https://brainly.com/question/14117795
#SPJ 6
TAn adult with the flu has a temperature of 103.0 ∘F.
Express your answer as an integer.
A brain contains 1.10×10^10 neurons.
Express your answer as an integer.
The time for a nerve impulse to travel from the feet to the brain is 0.46 s.
Express your answer as an integer.
Answer:A integer is a whole number.
An adult with the flu has a temperature of 102°F
A brain contains neurons (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 10 to 8)
The time for a nerve impulse to travel from the feet to the brain is s. (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 0 to -2)
Explanation: i am sorry for being 2 year late :(
i hope this answer your question if this is wrong or correct please let me know
0.00035 scientific notation
In the following atomic model, where does the strong nuclear force happen?
Answer:
the strong nuclear force happens in the neuclus
Aqueous hydrochloric acid HCl will react with solid sodium hydroxide NaOH to produce aqueous sodium chloride NaCl and liquid water H2O. Suppose 9.84 g of hydrochloric acid is mixed with 3.1 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 2 significant digits.
Answer:
1.4 g H₂O
Explanation:
In a reaction, the reactants are usually not present in exact stoichiometric amounts, that is, in the proportions indicated by the balanced equation. Frequently a large excess of one reactant is supplied to ensure that the more expensive reactant is completely converted to the desired product. Consequently, some reactant will be left over at the end of the reaction. The reactant used up first in a reaction is called the limiting reagent, because the maximum amount of product formed depends on how much of this reactant was originally present. When this reactant is used up, no more product can be formed.
Read this description of the life cycle of a mushroom. 1. A mushroom begins to grow underground as a single-celled "spore.” 2. The spore grows into multicellular structures called "hyphae.” 3. The hyphae absorb nutrition and detect when conditions are right to sprout a mushroom above ground. 4. The sprouted mushroom then forms new spores that can enter the ground and begin the life cycle again. Which sentence about this life cycle shows that mushrooms need energy and respond to stimuli? A: A mushroom begins to grow underground as a single-celled “spore.” B: The spore grows into multicellular structures called “hyphae.” C: The hyphae absorb nutrition and detect when conditions are right to sprout a mushroom above ground. D: The sprouted mushroom then forms new spores that can enter the ground and begin the life cycle again
Answer:
Explanation:
I would sayy....C The hyphae absorb nutrition and detect when conditions are right to sprout a mushroom above ground.
Um I hope I helped bro :P
(-W-) but where's da cOokIeS??..........................Lol jkkk
Answer:
D THE SPROUTEEDMUSHROOM
Explanation:
Based on your observations of the laboratory assignment(s) that produced gases, can you conclude
that the same gas was produced in each assignment? Briefly explain.
Answer:
With the use of same chemicals, same gas will be produced while the use of different chemicals, different gases will be produced.
Explanation:
The same gas was produced in each assignment if the same chemicals are mixed with each other while different gases were produced in each assignment when different chemicals are allowed to mix. If every time, same chemicals and same concentration of chemicals are mixed together, the result will be the same means production of same gas but if different chemicals are allowed to mix, then the product will be the production of different gases.
The measure of the amount of matter is known as _______?
Answer:
Mass is a measure of the amount of matter in a substance or an object. The basic SI unit for mass is the kilogram (kg), but smaller masses may be measured in grams (g).
Enter the full electron configuration for S2�. What is the atomic symbol for the noble gas that also has this electron configuration?
Answer:
1. Electronic configuration of sulphide ion S²¯ (18) => 1s² 2s²2p⁶ 3s²3p⁶
2. Ar
Explanation:
1. S²¯ simply indicates that the sulphur atom (S) has gained two extra electrons.
Thus we shall write electron configuration of sulphur (S) and sulphide ion (S²¯) as follow:
The electronic configuration of S²¯
S (16) => 1s² 2s²2p⁶ 3s²3p⁴
S²¯ (18) => 1s² 2s²2p⁶ 3s²3p⁶
2. Determination of the noble gas element that has the same electronic configuration as S²¯.
This is illustrated below:
Sulphur (S) has 16 electrons while the sulphide ion (S²¯) has extra 2 electrons making it to have a total electron of 18. Observing the elements in the periodic table, only Argon has 18 electrons with electronic configuration as:
Ar (18) => 1s² 2s²2p⁶ 3s²3p⁶
Therefore, sulphide ion (S²¯) has the same electronic configuration as Argon (Ar).
Pure water can be consumed in a chemical reaction, resulting in the formation of a new
product. Refer to paragraph four. What type of change is this?
A. A physical change
B. A chemical change
C. A mixture change
D. A compound change
Is gasoline evaporated, gasoline, burned water frozen and water heated up a chemical change
Answer:
as gasoline is evaporated, this gasoline still remains as gasoline but in gaseous form when gas is being burned .
The transfer of thermal energy by particles moving through a fluid (either a
gas or a liquid) is called?
Answer:
Convection
Explanation:
Convection is the transfer of thermal energy by particles moving through a fluid.
Answer:
convection
Explanation:
trust
Explain how plastic can be both beneficial and detrimental at the same time.
Answer:
Detrimental- Toxic chemicals leach out of plastic and are found in the blood and tissue of nearly all of us. Exposure to them is linked to cancers, birth defects, impaired immunity, endocrine disruption and other ailments
Beneficial- Plastic packaging helps protect and preserve goods, while reducing weight in transportation,
Which ocean zone lies inside V-shaped ocean trenches? O A. Bathypelagic O B. Abyssopelagic Ο Ο Ο Ο O C. Mesopelagic O D. Hadalpelagic
Answer:
O D. Hadalpelagic is the answer.
What is the final volume of argon gas if 2.5 L at 94.0 kPa is compressed to a pressure of 207 kPa
Answer:
1.1 L
Explanation:
Volume and pressure are inversly proportional to each other meaning as volume increase, pressure decreases or the other way around. Use the equation V1P1=V2P2. So, it'll be (2.5L)(94.0kpa)=(207kPa)(V2). Thereby it is (2.5*94.0)/207= V2 = 1.1L. Don't forget your sigfigs which will be to 2 sigs.
The measurement 3.8 x 10^3 g could also be written as
Right now it's written in scientific notation, so you can just move the decimal place in 3.8 to the right 3 times (as it is times 10 to the third power) to get 3,800g.
The measurement 3.8 x 10³ grams could also be written as 3.8 kilograms.
What is a unit of measurement?A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind. It is determined by convention or regulation.
As given in the problem we have to convert the measurement of 3.8 x 10³ grams into some different units,
1000 grams = 1 kilograms
1 gram = 1 /1000 kilograms
3.8 x 10³ grams = 3.8 x 10³ ×1 /1000 kilograms
=3.8 kilograms
Thus, the measurement 3.8 x 10³ grams could also be written as 3.8 kilograms.
To learn more about the unit of measurement from here, refer to the link;
brainly.com/question/12629581
#SPJ2
how do isotope of the same element differ?
Answer:
isotope of the same element differ
Explanation:
isotope is one of two or more forms of the same chemical element. Different isotopes of an element have the same number of protons in the nucleus, giving them the same atomic number.
What is the function of the magnet in NMR?
A) It limits the nuclear spin to certain allowed spin states.
B) It allows random orientation of nuclear magnetic moments.
C) It causes the nucleus to spin.
D) It holds the sample in place.
Answer:
A) It limits the nuclear spin to certain allowed spin states.
Explanation:
A nucleus with an odd atomic number or an odd mass number has a nuclear spin, which can be observed through NMR.
A proton is the simplest nucleus, and its odd atomic number of 1 implies that it has one spin. We can visualize a spinning proton as a positively charged rotating sphere. This movement of a charged particle is like an electric current in a wired loop. It generates a magnetic field called the magnetic moment. When a small magnetic bar is placed in the field of a larger magnet, it rotates to align itself with the field of the larger magnet, a lower energy arrangement than an orientation against the field. Quantum mechanics requires that the proton's magnetic moment is aligned with the external field or against the field. The lowest energy state with the proton aligned with the field is called the spin alpha state (α spin). The higher energy state with the proton aligned against the external magnetic field is called the beta spin state (β spin).
In the absence of an external magnetic field, the magnetic moments of the protons have random orientations. When an external magnetic field is applied, each proton in a sample it assumes β state or α state. Because the state of spin α is lower in energy, there are more α spins than β spins.
Consider this equilibrium reaction at 400 K. Br2(g)+Cl2(g)↽−−⇀2BrCl(g)Kc=7.0 If the composition of the reaction mixture at 400 K is [BrCl]=0.00415 M, [Br2]=0.00366 M, and [Cl2]=0.000672 M, what is the reaction quotient, ???? ? ????= How is the reaction quotient related to the equilibrium constant, Kc, for this reaction?
Answer:
Q = 7.0
Q = kc. The reaction is in equilibrium
Explanation:
Based on the reaction:
Br₂ + Cl₂ ⇄ 2BrCl
Equilibrium constant of the reaction, kc, is the ratio of equilibrium concentrations products over reactants powered to its reaction coefficient:
Kc = [BrCl]² / [Br₂] [Cl₂] = 7.0
Now, reaction quotient, Q, is write as the same Kc but the concentrations are actual concentrations:
Q = [BrCl]² / [Br₂] [Cl₂]
Replacing:
Q = [0.00415M]² / [0.00366M] [0.000672M]
Q = 7.0
Now, as Q = Kc = 7.0, the reaction mixture is in equilibrium
Using the mmoles of (35)-2,2,-dibromo-3,4-dimethylpentane calculated earlier and the molecular weight of the product (962 g/mol). Predict the theoretical 1 0096 yield of the product in grams. Round to the hundredths place.
Answer:
The yield of the product in gram is [tex]\mathsf{{w_P}=0.26 \ gram}[/tex]
Explanation:
Given that:
the molecular mass weight of the product = 96.2 g/mol
the molecular mass of the reagent (3S)-2,2,-dibromo-3,4-dimethylpentane is 257.997 g
given that the millimoles of the reagent = 2,7 millimoles = [tex]2.7 \times 10^{-3} \ moles[/tex]
We know that:
Number of moles = mass/molar mass
Then:
[tex]2.7 \times 10^{-3} = \dfrac{ mass}{257.997}[/tex]
[tex]mass = 2.7 \times 10^{-3} \times 257.997[/tex]
mass = 0.697
Theoretical yield = (number of moles of the product/ number of moles of reactant) × 100
i.e
Theoretical yield = [tex]\dfrac{n_P}{n_R}\times 100\%[/tex]
where;
[tex]n_P = \dfrac{w_P}{m_P}[/tex] and [tex]n_R = \dfrac{w_R}{m_R}[/tex]
Theoretical yield = [tex]\dfrac{(\dfrac{w_P}{m_P})}{(\dfrac{w_R}{m_R})} \times 100\%[/tex]
Given that the theoretical yield = 100%
Then:
[tex]100\% =\dfrac{(\dfrac{w_P}{m_P})}{(\dfrac{w_R}{m_R})} \times 100\%[/tex]
[tex]\dfrac{w_P}{m_P}=\dfrac{w_R}{m_R}[/tex]
[tex]{w_P}=\dfrac{w_R \times m_P}{m_R}[/tex]
where,
[tex]w_P[/tex] = derived weight of the product
[tex]m_P =[/tex]the molecular mass of the derived product
[tex]m_R =[/tex] the molecular mass of the reagent
[tex]w_R[/tex] = weight in a gram of the reagent
[tex]{w_P}=\dfrac{w_R \times m_P}{m_R}[/tex]
[tex]{w_P}=\dfrac{0.697 \times 96.2}{257.997}[/tex]
[tex]\mathsf{{w_P}=0.26 \ gram}[/tex]
A certain element XX has four isotopes. 5.845% of XX has a mass of 53.93961 amuamu. 91.75% of XX has a mass of 55.93494 amuamu. 2.123% of XX has a mass of 56.93539 amuamu. 0.2820% of XX has a mass of 57.93328 amuamu. What is the average atomic mass of element XX? Express your answer numerically to four signif
Answer:
55.85 amu
Explanation:
Let A, B, C and D represent the four isotopes of element X.
The following data were obtained from the question:
Isotope A:
Abundance (A%) = 5.845%
Mass of A = 53.93961 amu
Isotope B:
Abundance (B%) = 91.75%
Mass of B = 55.93494 amu
Isotope C:
Abundance (C%) = 2.123%
Mass of C = 56.93539 amu
Isotope D:
Abundance (D%) = 0.2820%
Mass of D = 57.93328 amu
Average atomic mass of element X =.?
The average atomic mass of X can be obtained as follow:
Average Atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]
Average Atomic mass = [(53.93961 × 5.845)/100] + [(55.93494 × 91.75)/100] + [(56.93539 × 2.123)/100] + [(57.93328 × 0.2820)/100]
= 3.15277 + 51.32031 + 1.20874 + 0.16337
= 55.84519 ≈ 55.85
Therefore, the average atomic mass of X is 55.85 amu
what is the mass in grams of 1.9×1023 atoms of lead?
Answer:
Explanation:
# moles that exist in 1.9 X 10 23 =
= # of atoms/# of Avogadro 's num
= 1.9 X 10 23 / 6.02x10 23
= 0.266 mole of Pb
now we calculate the mass
mass of lead = # mol x m.wt
= 0.266 X 106.4
= 28.30 gram
The chemical 2,4-D causes liver decay in birds. True False
Answer:
no it cant
Explanation:
what's evaporation according to kinetic particle theory?
Answer:
Evaporation is a change of phase from liquid to gas explained as follows : When particles in the liquid phase are heated, they gain kinetic energy and move faster and further apart.
What is the mass of a block that measures 6.7cm x 6.8cm x4.3cm and has a density of 22.29g/cm³
Answer:
4366.8 grams or 4.4 kg
Explanation:
Density = Mass / Volume
Mass = Density x Volume
M = 6.7 x 6.8 x 4.3 x 22.29
M = 4366.8 g
Best Regards!
What does green design refer to?
A. Using materials and design techniques that reduce the negative
environmental impact of a structure
B. Using innovative steel production, modern safety elevators, and
other engineering technologies
C. Using natural colors when designing building so that they don't
seem harsh against the natural landscape
D. Incorporating various materials' strengths and weaknesses in the
design process
SUBMIT
Answer:
A. Using materials and design techniques that reduce the negative
environmental impact of a structure
Explanation:
A P E X
Using materials and design techniques that reduce the negative
environmental impact of a structure. Hence, option A is correct.
What is green design?Green design is the 'creation of buildings which are energy-efficient healthy, comfortable, flexible in use and designed for long life.
The word ‘Green’ represents designs which are eco-friendly and less harmful to humans and other organisms. It helps in the protection of natural resources such as water, air etc.
Green designs are also referred to as techniques and materials that reduce the negative environmental impact of a structure.
Hence, option A is correct.
Learn more about green design here:
https://brainly.com/question/27560699
#SPJ2