Answer: (a) To find the moment of inertia of Jay about his center of mass, we can use the formula I = mr^2, where m is the mass of the object and r is the distance from the center of mass to the point of rotation. Plugging in the values, we get I = 65 kg * (0.10 m)^2 = 0.65 kg*m^2.
(b) To find the moment of inertia of Jay about the axis of rotation of the chair, we need to use the formula I = Icm + md^2, where Icm is the moment of inertia about the center of mass and d is the distance from the center of mass to the axis of rotation. Plugging in the values, we get I = 0.65 kgm^2 + 65 kg * (0.10 m)^2 = 0.65 kgm^2 + 0.65 kgm^2 = 1.30 kgm^2.
(c) To find the angular acceleration of the chair while Jay is in his cylindrical position, we can use the formula alpha = T/I, where T is the torque and I is the moment of inertia. The angular acceleration is given as -0.0700 rad/s^2, so we can rearrange the formula to solve for T: T = I * alpha = 1.30 kg*m^2 * (-0.0700 rad/s^2).
(d) To find the angular acceleration of the chair while Jay is in his second position, we can use the same formula as before: alpha = T/I. The angular acceleration is not given, so we cannot solve for T directly.
(e) To find the moment of inertia of the chair, we can use the formula I = mr^2, where m is the mass of the object and r is the distance from the center of mass to the point of rotation. The mass of the chair is given as 30 kg and the distance from the center of mass to the axis of rotation is not given, so we cannot solve for I directly.
(f) To find the torque due to friction when Jay is in the chair, we can use the formula T = Fd, where F is the force of friction and d is the distance from the axis of rotation to the point of application of the force. The force of friction is not given, so we cannot solve for T directly.
(g) To find the moment of inertia of Jay in his second position, we need to use the formula I = Icm + md^2, where Icm is the moment of inertia about the center of mass and d is the distance from the center of mass to the axis of rotation. The moment of inertia about the center of mass and the distance from the center of mass to the axis of rotation are not given, so we cannot solve for I directly.
(h) To find Jay's angular speed when the timing started, we need to know the time it took for Jay to complete one revolution and the radius of the circle he was rotating around. Both of these values are not given, so we cannot solve for the angular speed directly.
(i) To find Jay's angular speed just before changing positions, we need to know the time it took for Jay to complete one revolution and the radius of the circle he was rotating around. Both of these values are not given, so we cannot solve for the angular speed directly.
(j) To find Jay+Chair's angular momentum just before changing position, we need to know Jay's angular speed and the moment of inertia of Jay+Chair
c) A physicist while calculating the charge over on an object found that 6× 10-¹⁹ ℃ cannot be the magnitude of the charge on an object. Justify.
An electron has a charge that is equal to the size of the elementary charge, e, with a negative sign. The value of the elementary charge is 1.602 x 10-19 C.
Positive and negative electric charges are two distinct types that are known to exist. Electrons have a negative charge, whereas protons have a positive charge. The item has a positive net charge if there are more protons than electrons. The net charge of an object is considered to be negative if there are more electrons than protons. If there are an equal number of protons and electrons, the object is considered to be electrically neutral.For more information on electric charge kindly visit to
https://brainly.com/question/9194793
#SPJ1
Questions
Answer questions in complete sentences.
1. Compare the accelerations for the three trials. Explain how Newton's second law was demonstrated in the simulation?
2. Describe how Newton's first and third laws would apply to this situation if this simulation was done in the real world.
3. Compare the masses that you calculated for the three trials. If the actual mass of the cart did not change (same cart for all trials), what measurement do you believe contributed the largest amount of error to that calculation? Explain your answer.
Data Collection—Table 1:
Trial Force used (N) Time (s) Distance (m) (fixed) Acceleration (m/s2) Mass (kg)
1 200 4.77 5.0 0.21 952.38
2 300 3.82 5.0 0.34 882.35
3 50 9.39 5.0 0.05 1000
Furthermore, according to Newton's Second Law, the force required to accelerate an object increases with its mass.
What evidence is there for Newton's second law?When a ball is struck, it accelerates to a certain degree. The force exerted on the ball immediately correlates to the acceleration with which it moves. Consequently, Newton's second rule of motion is demonstrated in real life by the fact that the ball moves quicker the harder you strike it.
What is the connection between acceleration and Newton's second law?A force exerted on an object causes it to accelerate in accordance with Newton's Second Law of Motion, commonly referred to as the Law of Force and Acceleration or the Law of Force and Mass.
To know more about Newton's second law visit :-
https://brainly.com/question/13447525
#SPJ1
A Composite wall is shown with surface temperatures T0 and TL. Layer 1 has a conductivity k1, Thickness L1 and layer 2 has conductivity k2, thickness L2. The cross sectional area of both layers is A.
L1/k1A + L2/k2A is the total thermal resistance between the surfaces at temperatures T0 and TL.
What does heat resistance actually mean?A measurement of the temperature differential at which a material or item resists the transfer of heat is known as thermal resistance. Thermal resistance is the inverse of thermal conductivity. Since the bulk of electrical components generate heat and need cooling, thermal resistance of materials is of special interest to electronic engineers. Electronic components might malfunction or fail due to overheating, hence special care must regularly be taken while designing those components.
What relationship does thermal conductance have with resistance?Engineering regularly uses another important concept. Since there is a resemblance between the dispersion of heat and electrical charge, engineers typically use the thermal resistance (i.e., thermal resistance vs heat conduction) to compute heat transport through materials. Thermal resistance is the reverse of thermal conductivity.
To know more about Thermal conductivity visit
https://brainly.com/question/23897839
#SPJ4
The complete question is,
A composite wall is shown with surface temperatures T0 and TL. Layer L1 has conductivity K1, thickness L1 and layer 2 has conductivity k2, thickness L2. The cross-sectional area of both layers is A. The total thermal resistance between the surfaces at temperatures T0 and TL is.
The speed of light depends on the medium. Refractive index of the water is 1.33 and for glycerin is 1.473.
The medium determines the speed of light in which light is travelling.
The refractive index is the ratio of the speed of light in the vacuum to the speed of light in that particular medium. The speed of light in a vacuum is 3 x 10⁸ m/s
n = c/v
c = speed of light in the vacuum
v = speed of light in the medium
n = refractive index of the medium
The Refractive index of the water is 1.33 and for glycerin is 1.473. It means the speed of light is more in water than in glycerin. This occurs because of more density in glycerin as compared to water. The material with greater density hampers the speed of light.
Hence, more the refractive index of water slower light travel through it.
To know more about Refractive index.
https://brainly.com/question/29858469
#SPJ4
How did Edwin Hubble classify spiral galaxies?
O according to the width of their spiral arms
O according to the length of their lives
O according to the tightness of their spiral arms compared to the size
of their nuclear bulges
O according to the density of their spiral arms and nuclear bulges
Answer:
The correct answer is C.
Explanation:
Edwin Hubble classified spiral galaxies according to the tightness of their spiral arms compared to the size of their nuclear bulges. This classification scheme, known as the Hubble sequence, is based on the observation that spiral galaxies can have different degrees of spiral arm tightness and different sizes of nuclear bulges. By comparing these two features, Hubble was able to divide spiral galaxies into three main categories: barred spirals, normal spirals, and flocculent spirals. The classification of a spiral galaxy into one of these categories depends on the relative size of its nuclear bulge and the tightness of its spiral arms.
Answer:
How did Edwin Hubble classify spiral galaxies?
according to the tightness of their spiral arms compared to the size of their nuclear bulges
Explanation:
Took the K12 test.
When matter undergoes a change in form but the chemical make up is not changed it is a ?
Answer: Law of conservation of mass
Explanation:
Choose the one which is False.
1. If the speed changes, the velocity also changes.
2. If the speed changes, there is acceleration.
3. If the speed does not change, but the direction changes, there will be acceleration.
4. Motion with constant velocity is accelerated motion.
5.
Motion along a straight line is Linear motion.
Answer:
4
Explanation:
1 is true. Speed is the magnitude of velocity so if the magnitude of velocity(speed) changes, then velocity changes itself.
2 is true.
[tex]a _{avg} = \frac{v _{f} - v _{i} }{t} [/tex]
Since speed changes, the inital and final speeds are different, therefore we will have some nonzero acceleration because the numerator does not equal zero.
3 is correct, acceleration is a vector so it has direction, meaning if the direction of speed changes then we will have acceleration.
4. is false, a constant velocity has a acceleration of 0.
5 is correct, motion along a straight line is linear.
The Sun radiates energy at a rate of about 4×1026W. Earth is about 150×106km from the Sun.
Estimate the energy coming to Earth from the Sun each second. The radius of Earth is about 6400 km .
The average intensity received on the Earth's surface is [tex]12.6*10^{10} W/m^{2}[/tex]
[tex]Intensity = Rate of energy radiated/4\pi R^{2}[/tex]
where R is the distance of the earth from the sun.
[tex]I=4*10^{26}/4\pi *[150*106*10^{3}]^{2}[/tex]
[tex]I=0.12597*10^{12}[/tex]
[tex]I=12.6*10^{10} W/m^{2}[/tex]
What is the meaning of the intensity of sunlight?
Sun intensity refers to the amount of incoming solar energy, or radiation, that reaches the Earth's surface. The angle at which the rays from the sun hit the Earth determines this intensity.
What is the average intensity received on the Earth's surface?
The average intensity received on the Earth's surface is given by:
[tex]I=rate of energy radiated/4\pi R^{2}[/tex]
Thus, the average intensity received on the Earth's surface is [tex]12.6*10^{10} W/m^{2}[/tex]
To know more about the intensity received from the sun:
https://brainly.com/question/29579262
#SPJ1
Need to fill in the blank
Neglecting drag, the cannonball's initial height, and its horizontal motion, the maximum height rise is 110.45 metres, the time it takes for the ball to rise is 4.7 seconds, and the overall flight duration is 9.4 seconds.
Equation:
A pupil propels a cannonball 47.0 metres per second vertically upward.
assuming that the acceleration brought on by gravity is 10 m/s2.
Using the equation U2 = 2gH, the cannonball's highest point will be determined.
where H is the height the cannonball reaches.
When all the figures are put together, 47*47 = 2*10*H
H = 110.45 metres.
The cannonball's ascent time would be given by t=(2H/g).
When all the values are put together, t = (2*110.45/10)t = 4.7 seconds.
The cannonball's total flight time, T, is equal to the sum of its rise and descent times.
The ratio of ascent to descent is time.
Time of ascension = 4.7 Seconds since there is no other acceleration present and it is motion under gravity.
T = 2×(time of ascent) (time of ascent)
9.4 seconds are equal to T = 2*4.7.
To know more about acceleration, visit:
https://brainly.com/question/12550364
#SPJ1
A skateboarder with a mass of 120 kilograms (including the skateboard) is traveling at a speed of 5.00 meters per second upon reaching the bottom of a ramp. Between the top of the ramp and the bottom, the skateboarder lost 150 joules of thermal energy due to friction. What was the potential energy of the skateboarder at the top of the ramp?
6,150 J.
5,850 J.
1,650 J.
1,350 J.
The potential energy of the skateboarder at the top of the ramp was 1650 joule.
What is laws of conservation of energy?The law of conservation of energy asserts, in essence, that: The total energy of the system is preserved in a closed system, or a system that is separated from its surroundings.
Given that: A skateboarder with a mass of 120 kilograms (including the skateboard) is traveling at a speed of 5.00 meters per second upon reaching the bottom of a ramp.
So, his kinetic energy = 1/2×mass×speed² = 1/2 × 120 × 5² = 1500 Joule.
Loss of energy due to friction = 150 joule.
So, the potential energy of the skateboarder at the top of the ramp be = 1500 Joule + 150 joule = 1650 joule.
Learn more about energy here:
https://brainly.com/question/24284560
#SPJ1
Which planet has the strongest gravity at its equator
Answer:
Jupiter
Explanation:
It has the highest gravitational pull
On a hot summer day, you decide to make some iced tea. First, you brew 1.50 L of hot tea and leave it to steep until it has reached a temperature of tea = 75.0 ∘C. You then add 0.975 kg of ice taken from the freezer at a temperature of ice = 0 ∘C. By the time the mix reaches equilibrium, all of the ice has melted. What is the final temperature T of the mixture? Find the equilibrium final temperature T of the system.
The final temperature of the mixture is 17.9 °C.
How find the final temperature?The final temperature of the mixture can be found using the formula for heat exchange between two bodies at different temperatures: Q = mcΔT, where Q is the heat exchanged, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
For the tea, Q = mcΔT = (4.18 J/g·°C)(1.50 L)(1000 g/L)(75.0 - T)
For the ice, Q = mcΔT = (2.09 J/g·°C)(0.975 kg)(0 - T)
Since the total heat in the system is conserved, the heat gained by the tea is equal to the heat lost by the ice. So, we can set the two equations equal to each other and solve for T.
(4.18 J/g·°C)(1.50 L)(1000 g/L)(75.0 - T) = (2.09 J/g·°C)(0.975 kg)(0 - T)
T = (75.0 - (2.09 J/g·°C)(0.975 kg)/(4.18 J/g·°C)(1.50 L)(1000 g/L)) = 17.9 °C
So, the final temperature of the mixture is 17.9 °C.
Learn more about heat exchange in brainly.com/question/22595817
#SPJ1
The half-life of chromium-51 is 28 days. If the sample contained 510 grams, how much chromium (in grams) would remain after 1 year?
Answer: 0.061gm
Explanation:
A 0.321 kg, 0.27 m radius thin shelled ball rolls (starting at rest) 3.82 m from the top down a 35 degree 10.0 m long incline without slipping. After the 3.82 m, the incline becomes frictionless for the rest of the board. After 0.8 m of the frictionless unencumbered movement, the ball reaches a frictionless, massless spring with a spring constant of 20 N/m.
a) How fast is the center of mass of the ball going after 3.82 m? (linear speed)
b) How fast is the ball rolling after the 3.82 m? (angular speed)
c) How much does the spring compress?
d) What is the ball's maximum linear speed?
e) What is the balls angular speed with the spring is fully compressed?
I need this answered by tomorrow night, so please don't rush this one too bad... I would like step-by-step solutions not just answers.
Answer:
Explanation:
Hope you can give me "Brainliest" answer is will help a lot! Thank you
To solve this problem, we can use the following equations:
Linear speed: v = d/t
Angular speed: w = v/r
Spring compression: x = (1/2)kx^2
Conservation of energy: KE = PE
a) To find the linear speed of the center of mass after 3.82 m, we can use the equation v = d/t. We know that d = 3.82 m and t = 1 s (since the ball is starting from rest). Plugging these values into the equation gives us:
v = 3.82 m / 1 s = 3.82 m/s
This is the linear speed of the center of mass after 3.82 m.
b) To find the angular speed after 3.82 m, we can use the equation w = v/r. We know that v is 3.82 m/s (the linear speed we just found) and r is 0.27 m (the radius of the ball). Plugging these values into the equation gives us:
w = 3.82 m/s / 0.27 m = 14.15 rad/s
This is the angular speed of the ball after 3.82 m.
c) To find the spring compression, we can use the equation x = (1/2)kx^2. We know that k is 20 N/m (the spring constant) and x is the spring compression (which we are trying to find). Plugging these values into the equation gives us:
x = (1/2)(20 N/m)(x^2)
To solve for x, we can rearrange the equation to get:
x^2 = (2/k)x
Substituting in the value for k gives us:
x^2 = (2/20 N/m)x
Solving for x gives us:
x = sqrt(2/20 N/m) = 0.2 m
This is the spring compression.
d) To find the maximum linear speed, we can use the conservation of energy equation KE = PE. We know that KE is the kinetic energy of the ball (which is equal to (1/2)mv^2) and PE is the potential energy of the ball (which is equal to mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the incline). We also know that the ball starts at the top of the incline with a height of h = 10 m and that it rolls down the incline a distance of d = 3.82 m. We can use these values to find the final height of the ball, h2, using the equation h2 = h - d = 10 m - 3.82 m = 6.18 m.
Substituting these values into the conservation of energy equation gives us:
(1/2)mv^2 = mgh2
Solving for v gives us:
v = sqrt(2gh2/m) = sqrt(2(9.8 m/s^2)(6.18 m)/0.321 kg) = 6.58 m/s
This is the maximum linear speed of the ball.
e) To find the angular speed with the spring fully compressed, we can use the equation w = v/r. We know that v is the maximum linear speed we just found (6.58 m/s) and r is the radius of the
What is the relationship between MASS and DENSITY?
As well as VOLUME and DENSITY?
A capacitor is connected to an AC source. If the maximum current in the circuit is 0.400 A and the voltage from the AC source is given by Δv = (82.8 V) sin[(86π)s−1t], determine the following.
a) the rms voltage (in V) of the source
b) the frequency (in Hz) of the source
c)the capacitance (in µF) of the capacitor
The RMS Voltage , Frequency and capacitance of capacitor is 82.8V,6.28Hz and 2.34F
Because the RMS value provides the amount of AC power drawn by a resistor that is comparable to the power drawn by a DC source, the RMS voltage is also referred to as the equivalent DC voltage. Consider a 10V DC source and a 5 load as an example. When using a DC source, the voltage value remains constant throughout all time.A potential difference is created across the capacitor by the buildup of charges in the conductors. The capacitor's capacity to hold a charge is determined by how much charge has accumulated. Capacitance is the name for this ability to hold a charge. The voltage created across the capacitor is directly proportional to the charge that has built up in the capacitor.Q ∝V .
Q = C/V.
C = Q/V.
RMS voltage =82.8VFrequency=2πw=2 x 3.14 x 1 =6.28Hzcapacitance=86/82.8=2.34 FTo find more about RMS Voltage-
https://brainly.com/question/14160294
#SPJ4
Which statement is true about the motion of a planet in its orbit around the Sun?
A: The orbital speed increases as the planet approaches apogee.
B: The orbital speed of the planet remains constant as it orbits the Sun.
C: The planent's orbital speed changes as it moves closer and farther from the Sun.
D: Perigee is when the orbital speed is at its least.
The statement that is true about the motion of a planet in its orbit around the Sun is the planet's orbital speed changes as it moves closer and farther from the Sun. The correct option is C.
What is the motion of planets?The motion of a planet is explained by Kepler's law of motion. Kepler's laws of planetary motion are physics rules that govern the motions of the planets in the solar system. They were developed by the German astronomer Johannes Kepler.
According to Kepler's first law of planetary motion, the path that the planets take around the sun is elliptical, with the sun's center at one focus. The distance between the Sun and the planets changes as they orbit the Sun.
Therefore, the correct option is C: The planet's orbital speed changes as it moves closer and farther from the Sun.
To learn more about the motion of planets, refer to the link:
https://brainly.com/question/21815417
#SPJ2
a man is trying to move his washing machine into the back of a removal van. the washing machine has a weight of 650N and the floor of the removal van is 0.80 metres above the ground. calculate the efficiency of the ramp
Answer:650 * 0.8
Explanation:520
Review what you learned in the unit about attribution theory. Explain in your own words what it is. Describe how attributions affect the way we explain behavior. In what way can attribution theory be harmful? In what way can it be helpful?
Attribution theory describes how an individual says or thinks that something is a as a result of a person's deed or an action of an external factor.
The cause of behavior is attributed to some internal characteristic of a person rather than external forces.
It can be harmful because attributing a person's character to a mistake can lead to underestimation of an individual.
Attribution helps an individual to understand the reason behind another person's behavior and thinking.
What is Attribution theory?Attribution theory is related to how ordinary people explain the causes of behavior and events that follow it. This helps them understand how they receive, interpret action, and how they give form an opinion of them.
When an person displays certain behaviors, they are usually attributed to certain internal characteristics. This theory can be harmful to explaining behavior because mistakes are attributed to character instead of external factors leading to underestimating people. On the other hand, it is beneficial to understanding people.
Learn more on Attribution theory here: https://brainly.com/question/6654060
#SPJ1
the beam has a rectangular cross section and is subjected to the loadings shown. determine the principal stresses at point a and point b, which are located just to the left of the 20-kn load. show the results on elements located at these points.
To determine the principal stresses at points A and B, we need to consider how these forces are distributed over the surface of the volume element. The principal stresses are the stresses that act along the directions of maximum and minimum stress on the element.
To determine the principal stresses at points A and B, we need to consider the forces acting on a small volume element located at these points.
The stress on a volume element is defined as the force acting on the element per unit area. The stress components at a point can be represented by a stress tensor, which is a 3x3 matrix with nine elements. The diagonal elements of the stress tensor represent the normal stress components, while the off-diagonal elements represent the shear stress components.
In this case, we are given that the beam has a rectangular cross-section and is subjected to the loadings shown. There is a vertical force F acting on the beam at point A, as well as a horizontal force P. The beam is also subjected to a moment M about the z-axis.
To find the principal stresses, we can first calculate the normal stress components and shear stress components at the points of interest. Then, we can use the equations of mechanics to determine the principal stresses by finding the eigenvalues of the stress tensor.
To do this, we need to know the dimensions of the volume element, as well as the magnitudes of the forces and moments acting on the beam. With this information, we can use the equations of statics to solve for the stress components at points A and B, and then use the equations of mechanics to determine the principal stresses at these points.
Learn more about stress at
https://brainly.com/question/16618064?referrer=searchResults
#SPJ4
Why are S-H bonds longer than O-H bonds?
Answer: S-H bonds are typically longer than O-H bonds because sulfur is larger than oxygen. The size difference between the two atoms means that the electrons in the bond are farther apart in an S-H bond, resulting in a longer bond length. Additionally, sulfur is less electronegative than oxygen, which means that the electrons in the bond are less strongly attracted to the sulfur atom and are therefore more likely to be found in the region between the two atoms, further increasing the bond length.
Explanation:
Answer:
Describe the differences between the O-H and S-H bond lengths. Due to its stronger shielding, which lessens the nuclear pull for the bonding electrons and causes a longer bond length, sulfur is a bigger atom than oxygen.
Explanation:
A doubly ionized lithium atom is in the ground state. It absorbs energy and makes transition to the n = 5 excited state. The ion returns to the ground state by emitting several photons. What is the wavelength of the highest energy photon?
The wavelength of highest photon energy is 0.544J.
Use the equation to calculate the electron's energy in the nth orbit. Calculate the energies of the first and third Bohr orbits to determine the amount of energy needed to excite the electron. The wavelength of a photon can be calculated using the photon energy formula. Check how many different routes an excited electron can take to reach its ground state, the first Bohr orbit.[tex]E=-\frac{13.6}{y^2}[/tex]E=-13.6/5²=0.544 JTo study about ground state -
https://brainly.com/question/1314094
#SPJ4
A copper cable is 1.2 km long and has a cross-sectional area of 5 mm^2. Find its resistance at 80°C if at 20°C the resistivity of copper is 0.02*10^-6ohm m and its temperature coefficient of resistance is 0.004/°C
Explanation:
Equation for resistity
[tex]p(t)= p(0) \times (1 + a \times (change \: in \: temp))[/tex]
[tex] = 0.02 \times {10}^{ - 6} \times (1 + 0.004 \times 60)[/tex]
[tex] = 2.48 \times {10}^{ - 8} ohm \: m[/tex]
[tex]r = (p \times l) \div a[/tex]
[tex] = (2.48 \times {10}^{ - 8} \times 1200) \div \: 5 \times {10}^{ - 6} [/tex]
[tex] = 5.952 \: ohms[/tex]
Which of the following is a natural resource for humans?
O Cars
O Electricity
O Houses
O Wood
Which of the following is a natural resource for humans?
O Cars
O Electricity
O Houses
O Wood
Wood
Answer:
wood is a natural resources to man because it is not created by man
A solar panel receives energy from the Sun at a rate of 5.0 kW.
Thermal energy is transferred from the solar panel to water with an efficiency of 20%.
Cold water of mass 15 kg enters the solar panel every hour.
The specific heat capacity of water is 4200 J/(kg °C).
Calculate the temperature increase of the water.
The temperature increase of the water is 57.1⁰C.
What is the change in temperature of the water?
The temperature increase of the water is determined by calculating the change in temperature of the water.
Q = mcΔθ
where;
Q is the quantity of heat transferred to the waterm is the mass of the waterΔθ is the change in temperature1 hour = 3600 seconds
The quantity of heat water transferred to the water = e x P x t
where;
e is the efficiency of the solar panelP is powert is the time duration( 0.2 x 5,000 x 3600 ) = 15 x 4200 x Δθ
3,600,000 = 63,000Δθ
Δθ = 3,600,000 / 63,000
Δθ = 57.1 ⁰C
Learn more about change in temperature here: https://brainly.com/question/27988898
#SPJ1
If Impulse is the change in momentum using forces, how would you have to change a large amount of force with a small force?
a .You will have to apply the force over a longer period of time
b. You will have to apply the force at a different direction
c. You will have to have more than one force present
d. You will have to decrease the total impulse acting on the object
To change a large amount of force with a small force, you will have to apply the force over a longer period of time. So, option (a) is correct.
What is impulse?In physics, the term "impulse" is used to characterize or measure the impact of force operating gradually to alter an object's motion. It is often stated in Newton-seconds or kilograms per second and is denoted by the symbol J.
Product of the average force applied to an object throughout time and the time period during which it is applied is impulse. The change in momentum is the same as impulse.
You will have to apply the force over a longer period of time to create large amount of impulse with a small force.
Learn more about impulse here:
https://brainly.com/question/9441152
#SPJ1
1. What type of plate boundary is at the point labeled "A"?
2. When an ocean plate converges with another plate, what is created on the seafloor at the line of convergence?
3. What type of plate boundary is being formed at the point labeled "B"?
4. What process is occurring at the points labeled "C "and "D"?
5. How do some rocks store information about Earth's magnetic field?
A specific spot on a tectonic plate border is represented by Point A.
what is tectonic plate border ?
An enormous slab of solid rock with an uneven form known as a tectonic plate is often made up of both continental and oceanic lithosphere rocks. Tectonic plates can be anything from a few hundred and a few thousand kilometres across in size. Among the biggest plates on the earth are the Pacific and Antarctic Plates.
Numerous smaller or less significant tectonic plates are also present. Despite being smaller, the minor plates play a smaller role in forming the earth's surface characteristics. The tectonic plates move like a conveyor belt due to currents in the molten rocks underneath the plates. The interaction where the plates meet or split is where the majority of geologic activity occurs. The plates barely shift a few millimetres annually, though.
A specific spot on a tectonic plate border is represented by Point A. Major tectonic plates are represented by plates X and Y. Labeling has been done for the Hellenic Trench, the minor tectonic plate Anatolian Plate, and the island of Crete. The relative directions of plate motion are shown by arrows.
To learn more about tectonic plate follow the given link:
https://brainly.com/question/1162125
#SPJ4
The odometer of a car indicates the total distance travelled by the vehicle. A driver looks at his odometer at two instances while he is driving (as shown below). Given that the diameter of the wheels of the vehicle is 75 cm, what is the average number of revolutions completed by each wheel in 1 minute?
A. 71
B. 283
C. 1200
D. 12700
The average number of revolutions completed by each wheel in 1 minute is 283 rounds.
What is distance?
Distance is the amount of space between two points or objects. It is a measure of length and can be measured in a variety of units such as kilometers, miles, or even light-years. Distance is an important concept in mathematics, used to calculate the length of a line segment, the circumference of a circle, the area of a triangle, and the volume of a sphere. It is also used in everyday life, such as calculating the distance between two cities, or the distance a car has traveled. Distance can also be used to compare the size of things, such as the relative distance between planets.
It is symbolized as km /sec.
as per the given question-distance= 20650.5-20950.5=60km
Time = 14:04-12:34=1 hour 30 minutes
1 hour 30 minutes = 90 minutes
wheel radius = 75÷2 = 37.5 cm
wheel circumterence =235.62cm
we know,
Average speed= distance/circumentace /time
60km/235.62cm/90 = 283 rounds.
To know more about distance click-
https://brainly.com/question/26550516
#SPJ1
If you know how to do physics i would appreciate if you help me. i am extremely confused
Answer: position E
Explanation:
After the ball is thrown it has a negative acceleration (it's slowing down) at a rate of 9.8 m/s2 (round that to 10 m/s2), which is g, the rate of acceleration due to gravity. The position of the ball is shown every 1 second. At position B, the ball has a speed of 40 m/s, at C = 30 m/s, at D = 20 m/s, and at E = 10 m/s. Every 1 second, the ball slows down by 10 m/s. At F, the top, the instantaneous speed = 0 m/s. Then the ball will then speed up by 10 m/s every second, until it reaches K, where the speed is back at 50 m/s.
a 16 kg box sitting at the top of an icy hill begins to slide down the essentially frictionless surface. at the bottom of the hill it collides with a spring loaded guardrail with a spring constant of 384 N/m. if the hill is 7.1 m high, how much did the box compress the spring?
The compression of the spring of spring constant 384 N/m is 2.41 m.
What is compression spring?Compression springs work by resisting and pushing back against any downward or inward force that tries to squash and hold them in a compressed state.
To calculate the compression of the spring, we use the formula below.
Formula:
e = √(2mgh/k)........... Equation 1Where:
e = Compression of the springm = Mass of the boxh = Heightg = Acceleration due to gravityk = Spring constantFrom the question,
Given:
m = 16 kgh = 7.1 mg = 9.8 m/s²k = 384 N/mSubstitute these values into equation 1
e = √(2×16×7.1×9.8/384)e = 2.41 mHence, the compression of the spring is 2.41 m.
Learn more about compression spring here: https://brainly.com/question/29563259
#SPJ1