19
What is the mass of a ball that is traveling 30 m/s and has 4.5 J of kinetic energy?
ave a GPF of 35512

Answers

Answer 1

Answer: The mass of ball is 10 grams.

Explanation:

Given : Kinetic energy = 4.5 J

Velocity = 30 m/s

The formula for Kinetic energy is as follows.

[tex]K.E = \frac{1}{2}mv^{2}[/tex]

where,

K.E = Kinetic energy

m = mass

v = velocity

Substitute the values into above formula as follows.

[tex]K.E = \frac{1}{2}mv^{2}\\4.5 J = \frac{1}{2} \times m \times (30 m/s)^{2}\\m = \frac{4.5 J \times 2}{900 m^2/s^2} (1 Js^{2} = kg m^{2})\\= 0.01 kg (1 kg = 1000 g)\\= 10 g[/tex]

Thus, we can conclude that the mass of ball is 10 grams.


Related Questions

How does a wind turbine make electricity?

1) The wind turns a generator inside.
2) Magic
3) Waves turn the generator.
4) Hamster turns the generator.

Answers

Answer:

1

Explanation:

the answer to this question is 1

describe the concept of force represent it quantiatively and derive unit of force

important please answer it as the question says and only if you know the answer​

Answers

[tex]\bcancel{\huge\red{\fbox{\tt{࿐αɴѕωєя࿐}}}}[/tex]

Force is defined as the rate of change of momentum. For an unchanging mass, this is equivalent to mass x acceleration. So, 1 N = 1 kg m s-2, or 1 kg m/s2.

Wind power produces a lot of air pollution.
O True
O False

Answers

Answer:

Wind is a renewable energy source. Overall, using wind to produce energy has fewer effects on the environment than many other energy sources. Wind turbines do not release emissions that can pollute the air or water (with rare exceptions), and they do not require water for cooling.

Explanation:

An Olympic skier moving at 20.0 m/s down a 30.0o slope encounters a region of wet snow, of

coefficient of friction μk = 0.740. How far down the slope does she go before stopping?


a.119 m

b.145 m

c.170 m

d.199 m

Answers

Answer:

Option B

Explanation:

Forces acting on the skier-

F1 [tex]= -mg sin(30)[/tex] down the slope  

F2 [tex]= -mg cos(30)[/tex]

F3 = friction force  [tex]= 0.74 mg cos(30)[/tex]  

Net force, down the slope  

[tex]= -mg sin(30)+ 0.74 mg cos(30)\\= mg(.74 cos(30)-sin(30))\\= 0.14mg\\= 1.38m[/tex]

Acceleration [tex]= F/m= 1.38[/tex] m/s2  

Acceleration remains constant, initial speed is 20 m/s

Speed at time t is [tex]1.38t- 20[/tex] m/s

Distance down the slope at time t is [tex]0.69t^2- 20t[/tex]

When the skier stops, her speed is 0. Thus,  

, [tex]1.38t- 20= 0\\t= 20/1.38\\= 14.5[/tex] seconds

Distance travelled in 14.5 seconds [tex]= (0.69)(14.52- 20(14.5)= -145 m[/tex](negative because it is down the slope).

Option B is correct

Question 3
By what volume would 25 L of alcohol increase if its temperature was
increased from 20°C to 30°C? (3 marks)​

Answers

Answer:

V2 = 37.5 L

Explanation:

Given the following data;

Initial volume, V1 = 25 L

Initial temperature, T1 = 20°C

Final temperature,T2 = 30°C

To find the final volume V2, we would use Charles' law;

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] \frac {V}{T} = K[/tex]

[tex] \frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}} [/tex]

Making V2 as the subject formula, we have;

[tex] V_{2}= \frac{V_{1}}{T_{1}} * T_{2}[/tex]

[tex] V_{2}= \frac{25}{20} * 30 [/tex]

[tex] V_{2}= 1.25 * 30 [/tex]

V2 = 37.5 L

how much work is done in accelerating a 2000 kg car from rest to a speed of 30 m/s?

Answers

The work done is the same as the amount of energy increase. The formula for kinetic energy is 122
1
2
m
v
2
.

The initial KE of the car is 12(1000)×202=200,000
1
2
(
1000
)
×
20
2
=
200
,
000
joules.

The final KE of the car is 12(1000)×302=450,000
1
2
(
1000
)
×
30
2
=
450
,
000
joules.

The difference between these is the amount of work done: 450,000−200,000=250,000
450
,
000

200
,
000
=
250
,
000
joules.
14.2K viewsView upvotes

20



3

the electrostatic force between two objects is 40N. if the charge of one object is cut in half, and the distance is doubled, what is the new force?

Answers

Answer:

F1 = K Q1 Q2 / R1^2

F2 = K Q1 / 2 * Q2 / (2 R1)^2

F2 / F1 = 1/2 / 4 = 1/8

The new force is 5N   (1/2 due to charge and 1/4 due to distance)

A string with a length of 6.2 m is vibrated at its natural frequency (first harmonic). What is the wavelength of the produced standing wave?

3.1 m

6.2 m

12.4 m

18.6 m

Answers

Answer:

12.4m

Explanation:

Given

Length of string = 6.2m

L = λ/2 (for natural frequency (first harmonic)

λ = 2L

λ  = 2(6.2)

λ = 12.4m

Hence the wavelength of the produced standing wave is 12.4m

1. How fast is a radio wave traveling if it is 4.0 meters long and its frequency is
82 Hz?

Answers

Answer:

Speed = 328 m/s

Explanation:

Given the following data:

Wavelength = 4 m

Frequency = 82 Hz

To find the speed of the radio wave;

Speed = wavelength * frequency

Speed = 4 * 82

Speed = 328 m/s

Therefore, the radio wave is travelling at 328 meters per seconds.

Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.

In a Young's double-slit experiment, two parallel slits with a slit separation of 0.165 mm are illuminated by light of wavelength 560 nm, and the interference pattern is observed on a screen located 4.05 m from the slits. (a) What is the difference in path lengths from each of the slits to the location of the center of a fifth-order bright fringe on the screen

Answers

Answer:

the difference in path lengths from each of the slits to the location of the center of a fifth-order bright fringe on the screen is 28 × 10⁻⁷ m

Explanation:

Given the data in the question;

slit separation d = 0.165 mm = 0.165 × 10⁻³ m

wavelength λ = 560 nm = 560 × 10⁻⁹ m

distance between the screen and slits D = 4.05 m

now,

for fifth-order bright fringe path difference = mλ

where m is 5

so, the difference in path lengths from each of the slits will be;

Δr = mλ

we substitute

Δr = 5( 560 × 10⁻⁹ m )

Δr = 28 × 10⁻⁷ m

Therefore, the difference in path lengths from each of the slits to the location of the center of a fifth-order bright fringe on the screen is 28 × 10⁻⁷ m

13. The percent of Earth's surface covered by high clouds
in January 1987 was closest to which of the following?
A. 13.09
B. 13.5%
C. 14.0%
D. 14.5%
16. Which of the following figures best represents the
monthly average cover of high. middle, and low clouds
in January 19922
E.
H.
cloud cover
okud cover
middle cloud
high clouds
high cloud
low clouds
low clouds
midle clouds
G.
J.
14. Based on Table I. a cosmic ray flux of 440.000 parti-
cles/m he would correspond to a cover of low clouds
that is closest to which of the following?
F. 28.75
G. 29.09
H. 29.35
J. 29.6%
ckud cover
cloud cover
high clouds
low clouds
middle cloud
high clouds
middle clouds
low clouds

Answers

B
Low clouds
H
High clouds

Roland Incorporated manufactures and sells portable hair dryers. If the price of a hair dryer is $ 127.00, then the company sells 116 hair dryers per week, and the elasticity of demand is −0.463. Assume that the demand function is differentiable and that the only time the company sells exactly 116 hair dryers per week is when the price of a hair dryer is $ 127.00. Given this situation, which of the following do you know MUST be true?

a. The marginal revenue is negative when Roland sells 144 driers per week.
b. The marginal profit is negative when Roland sells 144 driers per week.
c. The marginal profit is positive when Roland sells 144 driers per week.
d. The marginal revenue is positive when Roland sells 144 driers per week.

Answers

Answer:

The marginal revenue is positive when Roland sells 144 driers per week ( D

Explanation:

Elasticity of demand = -0.463

P = $127

116 hair dryers sold per week ( q )

demand function is differentiable

prove  the true statement below

Revenue = price per unit * quantity

determine the Marginal revenue = dr / dq

∴ MR = P + q dp/dq

price elasticity of demand E(p) = - dq / dp * p/q

where : E ( p ) = - 0.463  , q = 116 , p = $127

q * dp/dq = P / 0.463

∴ MR = P * 1.463 / 0.463

         = 127 * 3.16 = $401.32

since the Marginal revenue > 0 HENCE The marginal revenue will be  positive when Roland sells 144 driers per week.

A car of mass 800kg is travelling at 10m/s. How much work must be done to stop it?​

Answers

Answer:

80

Explanation:

800/10

=80

pls mark as brainliest


Which wave has the smallest wave
period? What is its period?

Answers

Answer:

C

Explanation:

The said wave takes the shortest time to move/get transmitted

PLEASE HELP

A ball, 1.8 kg, is attached to the end of a rope and spun in a horizontal circle above a student's head. As the student rotates the ball in a horizontal clockwise circle their lab partner counts 53 rotations in one minute. What is the ball's angular velocity in radians per second?

Answers

Answer:

The angular speed of the ball in radians per second is 5.55 rad/s.

Explanation:

Given;

mass of the ball, m = 1.8 kg

number of the ball's rotation per minute, n = 53 RPM

The angular speed of the ball in radians per second is calculated as follows;

[tex]\omega = 53\frac{rev}{\min} \times \frac{2\pi \ rad}{1 \ rev} \times \frac{1\min}{60 \ s } \\\\\omega = 5.55 \ rad/s[/tex]

Therefore, the angular speed of the ball in radians per second is 5.55 rad/s.

What is a centripetal acceleration of a greyhound running on a circular track with a radius of 50 m at 12.5 m/s

Answers

Answer:

Centripetal acceleration = 3.125 m/s²

Explanation:

Given the following data;

Radius, r = 50 m

Velocity, V = 12.5 m/s

To find the centripetal acceleration;

Centripetal acceleration = Velocity²/radius

Centripetal acceleration = 12.5²/50

Centripetal acceleration = 156.25/50

Centripetal acceleration = 3.125 m/s²

Therefore, the centripetal acceleration of the greyhound running on a circular track is 3.125 meters per seconds square.

Explain how to make aluminum magnetic

Answers

Answer:

Use some Glue.. . . Aluminium is not magnetic, so your magnet can't sticl to aluminium without using Glue. You cannot get a magnet to stick to aluminum, no matter how hard you try. Aluminum is diamagnetic, which means it repels a magnetic field.

Explanation:

Hope It Help

brainliest please

Exposure to a sufficient quantity of ultraviolet will redden the skin, producing erythema - a sunburn. The amount of exposure necessary to produce this reddening depends on the wavelength. For a 1.0 cm2 patch of skin, 3.7 mJ of ultraviolet light at a wavelength of 254 nm will produce reddening; at 300 nm wavelength, 13 mJ are required. Part A What is the photon energy corresponding to each of these wavelengths

Answers

Answer:

Energy = 7.83 x 10⁻¹⁹ J

Energy = 6.63 x 10⁻¹⁹ J

Explanation:

The energy of a photon in terms of wavelength can be calculated by the following formula:

[tex]Energy = \frac{hc}{\lambda}\\[/tex]

where,

h = Plank's Constant = 6.63 x 10⁻³⁴ Js

c = speed of light = 3 x 10⁸ m/s

λ = wavelength of light

Now, for λ = 254 nm = 2.54 x 10⁻⁷ m:

[tex]Energy = \frac{(6.63\ x\ 10^{-34}\ Js)(3\ x\ 10^8\ m/s)}{2.54\ x\ 10^{-7}\ m}\\[/tex]

Energy = 7.83 x 10⁻¹⁹ J

Now, for λ = 300 nm = 3 x 10⁻⁷ m:

[tex]Energy = \frac{(6.63\ x\ 10^{-34}\ Js)(3\ x\ 10^8\ m/s)}{3\ x\ 10^{-7}\ m}\\[/tex]

Energy = 6.63 x 10⁻¹⁹ J

name the three major types of clouds

Answers

Answer:

Cumulus, Stratus, and Cirrus. There are three main cloud types.

Explanation:

hopes it help^_^

Does an infrared wave or an x-ray travel faster in the vacuum of space?

Answers

Ok no se si te puedo

Answer:

All electromagnetic radiation, of which radio waves and X-rays are examples, travels at the speed c in a vacuum. The only difference between the two is that the frequency of X-rays is very much higher than radio waves

Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 13-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of 5 L/min, determine the power rating of the resistance heater. Also, estimate the inner surface temperature of the pipe at the exit.

Answers

Answer:

- the power rating of the resistance heater is 24139.5 W

- the inner surface temperature of the pipe at the exit is 96.34°C

Explanation:

Given the data in the question;

Flow rate of water in the tube V" = 5L/min = 8.333 × 10⁻⁵ m³/s        

The water is to be heated from 10°C to 80°C;

so Average or mean temperature [tex]T_{avg[/tex] will be;

[tex]T_{avg[/tex] = (T₁ + T₂) / 2 = (10 + 80) / 2 = 90/2 = 45°C

Now, from the Table " Properties of Water " at average temperature;

at [tex]T_{avg[/tex] = 45°C

density p = 990.1 kg/m³

specific heat [tex]C_p[/tex] = 4180 J/kg-k

thermal conductivity k = 0.637 W/m-°C

Now, we determine the mass flow;

m" = pV"

we substitute

m" = 990.1 × 8.333 × 10⁻⁵

m" = 0.08250 kg/s

we know that the power rating of the resistance heater is equal to the heat transfer rate to the water;

Q' = m"[tex]C_p[/tex]( T₂ - T₁ )

we substitute

Q' = (0.08250 × 4180 ) ( 80 - 10 )

Q' =  344.85 × 70

Q' = 24139.5 W

Hence, the power rating of the resistance heater is 24139.5 W

Next, we determine the average velocity of water in the tube;

[tex]V_{avg[/tex] = V" / [tex]A_c[/tex]

[tex]V_{avg[/tex] = V" / ( [tex]\frac{1}{4}[/tex]πD² )

given that;  flows through a 2-cm-internal-diameter; D = 0.02 m

we substitute

[tex]V_{avg[/tex] = (8.333 × 10⁻⁵) / ( [tex]\frac{1}{4}[/tex]π × (0.02)² )

[tex]V_{avg[/tex] = (8.333 × 10⁻⁵) / ( 3.14159 × 10⁻⁴ )

[tex]V_{avg[/tex] =  0.265 m/s

Also, from table " saturated water property table "

At 45°C

viscosity μ = 0.596 × 10⁻³ kg/m-s

Prandtl number Pr = 3.91

Now, we determine the kinematic viscosity

v = μ / p

we substitute

v = ( 0.596 × 10⁻³ ) / 990.1

v = 6.01959 × 10⁻⁷ m²/s

so, Reynolds number in the flow region will be;

Re = ([tex]V_{avg[/tex] × D) / v

we substitute

Re = ( 0.265 × 0.02) / (6.01959 × 10⁻⁷)

Re = 8804.586

we can see that our Reynolds number (  8804.586 ) more than 2300 and less than 10,000.

Hydraulic and thermal entry length are equal in this flow region,

such that;

[tex]L_h[/tex] = [tex]L_t[/tex]

⇒ 10 × D = 10 × 0.02 = 0.2 m

we can see that the entry length ( 0.2 m ) is smaller than the given length ( 13 m ) in the question; the flow is a turbulent flow.

So we the Nuddelt number

Nu = [tex]0.023Re^{0.8} Pr^{0.4[/tex]

Nu = 0.023 × [tex]8804.586^{0.8[/tex] × [tex]3.91^{0.4[/tex]

Nu = 56.8

Hence, the heat transfer coefficient h will be;

h = [tex]\frac{k}{D}[/tex] × Nu

we substitute

h = [tex]\frac{0.637}{0.02}[/tex] × 56.8

h = 31.85 × 56.8

h = 1809.1 W/m²-°C

Now, area of the heat transfer will be

A[tex]_s[/tex] = πDL

we substitute

A[tex]_s[/tex] = π × 0.02 × 13

A[tex]_s[/tex] = 0.8168 m²

Finally we determine the inner temperature of the pipe at exit. using the relation;

Q' = hA[tex]_s[/tex]( T₃ - T₂ )

we substitute

24139.5 = 1809.1 × 0.8168( T₃ - 10 )

24139.5 = 1477.67288( T₃ - 80 )

24139.5 = 1477.67288T₃ - 118213.8304

24139.5 + 118213.8304 = 1477.67288T₃

1477.67288T₃ = 142353.3304

T₃ = 142353.3304 / 1477.67288T

T₃ = 96.34°C

Therefore, the inner surface temperature of the pipe at the exit is 96.34°C

45
А ______ is a solid, liquid or gas that a wave travels through.

Answers

Answer:

medium

Explanation:

I am not really sure

the titan mission scheduled for 2026 is a reconnaissance to explore the origin of life true or false

Answers

Answer:

its true

Explanation:

The titan mission scheduled for 2026 is a reconnaissance to explore the origin of life. Because, some scientific studies based on titan has showed that there is the presence of some biomolecules. Hence, the statement is true.

What is titan mission ?

The distinctive, abundantly organic planet of Titan is where we will travel next in the solar system, according to NASA. The Dragonfly expedition will fly numerous sorties to sample and inspect locations around Saturn's icy moon, advancing our hunt for the components of life.

In 2026, Dragonfly will take off, and it will land in 2034. The rotorcraft will travel to a great number of Titan's promising sites in search of prebiotic chemical processes that are similar to those on Titan and Earth.

Dragonfly, which has eight rotors and flies like a big drone, is the first multi-rotor vehicle NASA will operate for science on another world. To become the first spacecraft to ever fly its full science payload, it will take advantage of Titan's dense atmosphere, which is four times denser than Earth's. Hence, the statement is true.

Find more on Titan mission :

https://brainly.com/question/13405016

#SPJ3

A long, uninsulated steam line with a diameter of 89 mm and a surface emissivity of 0.8 transports steam at 200C and is exposed to atmospheric air and large surroundings at an equivalent temperature of 20C. (a) Calculate the heat loss per unit length for a calm day. (b) Calculate the heat loss on a breezy day when the wind speed is 8 m/s. (c) For the conditions of part (a), calculate the heat loss with a 20-mm-thick layer of insulation (k 0.08 W/m K). Would the heat loss change significantly with an appreciable wind speed

Answers

Answer:

[tex]Q_net=534.67\frac{w}{m}[/tex]

Explanation:

From the question we are told that:

Steam line diameter [tex]D=89mm \approx 0.089m[/tex]

Surface emissivity [tex]\mu=0.8[/tex]

Steam temp [tex]T_s=200\textdegree C \approx 200+273=473k[/tex]

Surrounding temp [tex]T_a=20 \textdegree C \aprrox 20+273= 293k[/tex]

 

Generally the equation for heat loss per unit length due to radiation [tex]Q_{net}[/tex] is mathematically given by

[tex]Q_net=\sigma*\mu>(\pi *d)*(T_s^4-T_a^4)[/tex]

[tex]Q_net=5.6*10^8*0.8*(\pi *0.089)*(473^4-293^4)[/tex]

[tex]Q_net=534.67\frac{w}{m}[/tex]

How efficient are the small and large scale solar-power systems used in individual homes and industrial settings?

Plz someone help me

Answers

Answer:

I study physics too, want me to study with you?

An 800 kg car finishes a 5000-meter road in 300 seconds. Considering the car was moving at constant speed, what was its momentum?

Answers

Answer:

Momentum(P) = 1336kgm/s

Explanation:

Momentum is the product of the mass and velocity, therefore Momentum(P) is = mass*velocity. since the mass is given 800kg, all we are left with is the displacement 500m and the time 300s which can be used to find the velocity. so velocity is the displacement divided by the time, ie 500/300 which will give us the velocity 1.67m\s. hence we multiply the mass and the velocity and we'll get 1336kgm/s.

Give me four reasons pluto is a cool planet / dwarf planet

Answers

Pluto is categorized as a dwarf planet. In 2006, Pluto was categorized with three other objects in the solar system that are about the same small size as Pluto: Ceres, Makemake and Eris. These objects, along with Pluto, are much smaller than the "other" planets. Here is another one Pluto is a dwarf planet that lies in the Kuiper Belt. It's an area full of icy bodies and other dwarf planets at the edge of our solar system. Because Pluto is the biggest known object in this region, some call it "King of the Kuiper Belt."

One thing is certain. Pluto and its neighborhood are very peculiar. If scientists could unravel some of their mysteries, we would know more about how our solar system formed. Hope this helps! Mark brainly pls!

The photo shows a pair of figure skaters performing a spin maneuver. The
axis of rotation goes through the left foot of the skater on the left. What
action could increase the pair's angular velocity?

Answers

An action which could increase the pair's angular velocity is the figure skater on the left pointing his right arm down instead of up.

What is angular velocity?

Angular velocity simply refers to the rate of change of angular displacement of a physical object (body) with respect to time.

This ultimately implies that, angular velocity is a measure of how fast and quickly a physical object (body) rotates with respect to another point or how its angular displacement (position) changes with respect to time.

In this scenario, an action which could increase the pair's angular velocity is when the figure skater on the left points his right arm down instead of up.

Read more on angular velocity here: https://brainly.com/question/6860269

#SPJ1

the skater on the left pulls the skater on the right closer to him

Explanation:

apex bliches

Wind power is considered a renewable energy source.
O True
O False

Answers

Answer:

True

Explanation:

Answer:

your answer is true hope this helps

Part C
Now vary the mass of the skateboarder. Change the mass slider to the lowest mass. Repeat the investigation using the
steepest ramp. How does changing the mass of the skateboarder affect his kinetic energy on a given ramp? How does it
affect his speed? Remember to use the pause button to clearly see his energy and speed. Repeat your trials as many
times as needed.

Answers

Answer:

When mass increases, kinetic energy also increases. Changing mass doesn’t affect his speed on a given ramp.

Explanation:

Answer:

When mass increases, kinetic energy also increases. Changing mass doesn’t affect his speed on a given ramp.

Explanation:

pluto

Other Questions
Can someone plz help thxs ( do not put links and this is NOT a scam) 459,450,441, find the 37th term What is the greatest concentration of pollution 2 ways in which the effects of friction can be minimised in the experiment Where did diseases originate from New World or old world? An angle measures 59 degrees what is the measure of its supplement State one importance of breeding in the vicinity of agriculture. No links GEOMETRY HELP PLEASE!! WILL MARK BRAINLEIST!9 how can the volume of a sphere be found? How do you solve b^2=-3b Find tan A for the triangle below. A right triangle. The hypotenuse is 24.19, the side opposite to angle A is 12, and the side adjacent to angle A is 21. a. 0.868 b. 0.496 c. 1.75 d. 0.5714 I need help please and thanks What are The two most important things when it comes to being more successful In science I need help please anyone help???!!! (HURRY) A tank is filled with 100 gallons of water. The volume of water decreases by 10 gallons every hour.Which equation represents this situation if V represents the volume of water left in the tank in gallons and represents the time in hours? MRead the excerpt from Fast Food Nation.At Burger King restaurants, frozen hamburger patties are placed on a conveyer belt and emerge from a broilerninety seconds later fully cooked. The ovens at Pizza Hut and at Domino's also use conveyer belts to ensurestandardized cooking times. The ovens at McDonald's looklike commercial laundry presses, with big steelhoods that swing down and grill hamburgers on both sides at once. The burgers, chicken, french fries, andbuns are all frozen when they arrive at a McDonald's.The evidence presented here supports the author's claim that fast food restaurants are like factories because theexcerpt explores the variety of items available at many fast food chains.O describes the typical workday of a fast food employee.like to work at fast food restaurants.O explains why teenagers illustrates the assembly line principle of making things faster.Save and ExitNextSubmitMark this and return if the perimeter of an equilateral triangle is 54 in, what is the area? step by step Look the photoplz plz help mei will give brainliest Imani stirs a cup of hot sencha tea with a cool silver spoon. She notices that the silver spoon becomes warmer. What energy change occurs when the silver spoon is added to the hot cup of sencha tea?A. The spoon adds its cold to the hot tea B. The hot tea absorbs the heat from the spoon C. The cool spoon causes the water to expand thus cooling it D. The tea loses heat to the spoon causing the spoon to become warmer Segn el artculo, por cul medio muestra su preferencia Lindsey Clay?