17. What are the basic modes of operation of 8255?Write the features of mode 0 in 8255?

Answer:

There are two basic operational modes of 8255:

Bit Set/Reset mode (BSR mode).

Input/Output mode (I/O mode).

Features of 8255 Microprocessor:

Mode 0 : Simple Input/Output.

Mode 1 : Input/Output with handshake.

Mode 2 : Bi-directional I/O data transfer.

It has three 8-bit ports : Port A, Port B, and Port C, which are arranged in two groups of 12 pins.

The 8255 can operate in 3 I/O modes : (i) Mode 0, (ii) Mode 1, & (iii) Mode 2.

What is the hamming distance between the following bits? Sent
bits: 101100111, Received bits: 100111001
Select one: 5. Or 3 or 6 or4​

A new school is being built in the local school district.It will have three computer labs with 28 computers each. There will be 58 classrooms with 2 computers each that need to be on one sub-subnet.The office staff and administrators will need 7 computers. The guidance and attendance office will have 5 computers. The school has been given the address 223.145.75.0/24. Subnets are assigned from largest to smallest. Everything is based on the number of usable hosts.
Complete the information required below.
Subnet Subnet Mask (/X) Subnet First Usable Last Usable Broadcast
Address Host Host Address
1
2
3
4
5
6
7

layers allow you to work with one element of an image without disturbing the others true or false​

How are status reports useful

Which of the following is the cause of transmission impairment?
Select one:
O Frequency
O Amplitude
O Attenuation
O Phase​

what connect webpages?​

NEED HELP IMMEDIATELY!!
Highlight the upsides and downsides of seeking online help for a technical problems.

help meeeee pleaaaseee ​

What is the function of a bread crumb trial in a website

The following code segment appears in a class other than Backyard. It is intended to print true if b1 and b2 have the same lengths and widths, and to print false otherwise. Assume that x, y, j, and k are properly declared and initialized variables of type int.

Backyard b1 = new Backyard(x, y);
Backyard b2 = new Backyard(j, k);
System.out.println( /* missing code */ );

Which of the following can be used as a replacement for /* missing code */ so the code segment works as intended?

a. b1 == b2
b. b1.equals(b2)
c. equals(b1, b2)
d. b1.equals(b2.getLength(), b2.getWidth())
e. b1.length == b2.length && b1.width == b2.width

True or false question :)

Handware can be tracked back to ancient times. Over six centuries ago.
°true
°false

Write a MIPS assembly language program that prompts for a user to enter a series of floating point numbers and calls read_float to read in numbers and store them in an array only if the same number is not stored in the array yet. Then the program should display the array content on the console window.
Consult the green sheet and the chapter 3 for assembly instructions for floating point numbers. Here is one instruction that you might use:
c.eq.s $f2, $f4
bc1t Label1
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be:
c.eq.s $f2, $f4
bc1f Label1
To load a single precision floating point number (instead of lw for an integer), you might use:
l.s $f12, 0($t0)
To store a single precision floating point number (instead of sw for an integer), you might use:
s.s $f12, 0($t0)
To assign a constant floating point number (instead of li for an integer), you might use:
li.s $f12, 123.45
To copy a floating point number from one register to another (instead of move for an integer), you might use:
mov.s $f10, $f12
The following shows the syscall numbers needed for this assignment.
System Call System Call System Call
Number Operation Description
2 print_float $v0 = 2, $f12 = float number to be printed
4 print_string $v0 = 4, $a0 = address of beginning of ASCIIZ string
6 read_float $v0 = 6; user types a float number at keyboard; value is store in $f0
8 read_string $v0 = 8; user types string at keybd; addr of beginning of string is store in $a0; len in $a1
------------------------------------------
C program will ask a user to enter numbers and store them in an array
only if the same number is not in the array yet.
Then it prints out the result array content.
You need to write MIPS assembly code based on the following C code.
-------------------------------------------
void main( )
{
int arraysize = 10;
float array[arraysize];
int i, j, alreadyStored;
float num;
i = 0;
while (i < arraysize)
{
printf("Enter a number:\n");
//read an integer from a user input and store it in num1
scanf("%f", &num);
//check if the number is already stored in the array
alreadyStored = 0;
for (j = 0; j < i; j++)
{
if (array[j] == num)
{
alreadyStored = 1;
}
}
//Only if the same number is not in the array yet
if (alreadyStored == 0)
{
array[i] = num;
i++;
}
}
printf("The array contains the following:\n");
i = 0;
while (i < arraysize)
{
printf("%f\n", array[i]);
i++;
}
return;
}
Here are sample outputs (user input is in bold): -- note that you might get some rounding errors
Enter a number:
3
Enter a number:
54.4
Enter a number:
2
Enter a number:
5
Enter a number:
2
Enter a number:
-4
Enter a number:
5
Enter a number:
76
Enter a number:
-23
Enter a number:
43.53
Enter a number:
-43.53
Enter a number:
43.53
Enter a number:
65.43
The array contains the following:
3.00000000
54.40000153
2.00000000
5.00000000
-4.00000000
76.00000000
-23.00000000
43.52999878
-43.52999878
65.43000031

You want a cable that could be used as a bus segment for your office network. The cable should also be able to support up to 100 devices. Which cable should you use?

A.
RG-6
B.
RG-8
C.
RG-58U
D.
RG-59

A line beginning with a # will be transmitted to the programmer’s social media feed.

A.
True

B.
False

Which tab should you click if you want to access the Show All Comments option in a worksheet?

Home
Page Layout
Review
View

How to make a project using PID and thermacouple

Which statement best describes Link State routing? Group of answer choices Each router builds a cost-weighted graph of the network of all the routers and the shortest links between them, based on information received from each router regarding only its nearest neighbors All of these Each router uses a HELLO packet to announce its presence to its neighbors Each router builds a table with the best distance between each router and the link to use, based on each router’s providing data on distances to all the routers in its routing table to its nearest neighbors

list the main industries in Sierra Leone​

Which keyboard shortcut do we use to turn on APC?​

Write a program that lets a maker of chips and salsa keep track of sales for five different types of salsa: mild, medium, sweet, hot, and zesty. The program should use two parallel 5-element arrays: an array of strings that holds the five salsa names and an array of integers that holds the number of jars sold during the past month for each salsa type. The salsa names should be stored using an initialization list at the time the name array is created. The program should prompt the user to enter the number of jars sold for each type. Once this sales data has been entered, the program should produce a report that displays sales for each salsa type, total sales, and the names of the highest selling and lowest selling products.

SMTP (Simple Mail Transfer Protocol) is the standard protocol for transferring mail between hosts over TCP. A TCP connection is set up between a user agent and a server program. The server listens on TCP port 25 for incoming connection requests. The user end of the connection is on a TCP port number above 1023. Suppose you wish to build a packet filter rule set allowing inbound and outbound SMTP traffic. You generate the following rule set:

Rule Direction Src Addr Dest Addr Protocol Dest Port Action
A In External Internal TCP 25 Permit
B Out Internal External TCP >1023 Permit
C Out Internal External TCP 25 Permit
D In External Internal TCP >1023 Permit
E Either Any Any Any Any Deny

Required:
Describe the effect of each rule.

8. Many organizations build their networks around this type of computer.
A) server
B) terminal
C) supercomputer
heir netwo
of multiple
or that stores data
A)dektop

the shadows she fancied has tricked her. what does that mean

One way to add a table to a presentation is to click on Clip Art under the Insert tab. click on WordArt under the Insert tab. right-click on an existing page with content and choose Add Table. add a new slide and left-click on the Table symbol in an empty area.

Write a Perl program that uses a hash and a large number of operations on the hash. For example, the hash could store people’s names and their ages. A random- number generator could be used to create three- character names and ages, which could be added to the hash. When a duplicate name was generated, it would cause an access to the hash but not add a new element. Rewrite the same program without using hashes. Compare the execution efficiency of the two. Compare the ease of programming and readability of the two.

Theo is working on data for his business using Design view in an Access form. He wants to change a text field box's
number of products sold from 10,789 to 10,790. In which section of the form should Theo to make this change?
form footer
O form detail
form data
form header

A new school is being built in the local school district. It will have three computer labs with 28 computers each. There will be 58 classrooms with 2 computers each that need to be on one sub-subnet. The office staff and administrators will need 7 computers. The guidance and attendance office will have 5 computers. The school has been given the address 223.145.75.0/24.

Complete the information required below.

Subnet Subnet Mask (/X) Subnet Address First Usable Host Last Usable Host Broadcast Address
1

2

3

4

5

6

7

8

9

10

There used to be a popular type of pulp book for younger readers. They were called "Choose Your Own Adventure" novels. The idea was pretty simple. You'd start reading and then a few pages into the book, there would be a plot development that required a choice. The book might describe that you've entered a spooky house and the door has locked behind you. It would then ask you if you want to try to exit by going through the kitchen or exploring upstairs. If you chose to go into the kitchen, you'd turn to page 200, if you chose to go upstairs, you'd turn to page 43. This would repeat maybe five or six times though the book. You could re-read it a few times and try different outcomes.
In this lab you are going to create a choose your own adventure application using navigation controllers. The introduction screen to your application will contain a few lines of text to set up a story and then leave the user with a choice. Below the text, you will present two buttons that correspond to the different choices.
For example, you might see the following text on the main screen:
You are walking down the street when a tiger runs up and takes your lunch and then runs away...
Do you want to chase the tiger or run away?
Chase
Run Away
The user must then tap one of the buttons. This will move the user to a new screen with a few more lines of the story and another choice and two more buttons. You will create three (3) turning points in your story. This means that your story will have eight (8) different possible outcomes and a total of 15 screens.
Requirements
The story must ask three (3) questions, no matter how the user answers the previous question. All the questions must be different and result in a different story text.
The story must have eight (8) possible different final outcomes.
The story must include a minimum of 15 screens in total.
Create content that is appropriate and not-offensive. We will share these and play them together.
For extra credit you can add an extra screen and use inputs to capture data from the user such as a name, favorite food, or lucky number and use this data in the story.

Design a Python3 function to compare every prefix of a string X to every element of string Y, if there is a match, place it in a python set, sort and reversely sort the set, and return the sorted and reversely sorted sets.

Research and build a chroot jail that isolates ssh users who belong to the restrictssh group. (You will also need to create the restrictssh group). Next, install an ftp server and configure it to allow anonymous logins. Create a second chroot jail that can be accessed by the anonymous account. You will probably need to create several new user accounts to facilitate testing your setups.