13. In AABC, AB-5, AC-12, and mA - 90°. In ADEF, m/D-90°, DF-12, and EF- 13. Brett claims
AABC ADEF and AABC-ADEF. Is Brett correct? Explain why.

Jamal would need approximately 7.9 gallons of gas to travel 296.25 miles.

We can use the concept of direct variation to solve this problem. Direct variation means that two quantities are related by a constant ratio. In this case, the number of miles driven is directly proportional to the number of gallons used.

To find the constant of proportionality, we can use the given data. From the table, we can see that when Jamal used 14 gallons, he drove 525 miles. So we can write:

14/525 = k

where k is the constant of proportionality.

Solving for k, we get:

k = 14/525

Now we can use this value of k to find how many gallons Jamal would need to travel 296.25 miles. Let x be the number of gallons he would need. Then we can write:

x/296.25 = k

Substituting the value of k, we get:

x/296.25 = 14/525

Solving for x, we get:

x = (296.25 × 14) / 525

x ≈ 7.9

To learn more about proportionality click on,

https://brainly.com/question/29005048

#SPJ1

The t-value associated with a lower tail area of 0.05 and 50 degrees of freedom is -1.676.

To find the t-value for a lower tail area of 0.05 with 50 degrees of freedom, you would typically consult a t-distribution table.

Since your table only goes up to 30 degrees of freedom, you can use online tools or statistical software to find the required value.

Here are the steps to find this value without a chart:

1. Use an online t-distribution calculator, statistical software, or a spreadsheet program that has built-in statistical functions.

2. Input the necessary information:

degrees of freedom (50) and the tail area (0.05 for a one-tailed test).

3. The calculator or software will provide the t-value, which in this case is -1.676.

Remember that the negative sign indicates that the t-value falls in the lower tail of the distribution.

Learn more about t-value:

https://brainly.com/question/27192813

#SPJ11

By Simpson's rule approximation, n should be at least 17 to guarantee that the Simpson's rule approximation is accurate to within 0.00001.

To guarantee that the Simpson's rule approximation to the integral ∫₀¹ e^(x²) dx is accurate to within 0.00001, you need to consider the error bound formula for Simpson's rule:

Error ≤ (K * (b - a)⁵) / (180 * n⁴)

In this case, a = 0, b = 1, and the desired error bound is 0.00001. The function to integrate is f(x) = e^(x²). To find the value of K, you need to determine the maximum value of the fourth derivative of f(x) on the interval [0, 1].

After calculating the fourth derivative, you'll find that K is less than or equal to 12 (K ≤ 12). Plug these values into the error bound formula:

0.00001 ≥ (12 * (1 - 0)⁵) / (180 * n⁴)

Solve for n:

n⁴ ≥ (12 * 1⁵) / (180 * 0.00001)

n⁴ ≥ 66666.67

n ≥ ∛√66666.67

n ≥ 16.10

Since n must be an integer, round up to the nearest whole number. Thus, n should be at least 17 to guarantee that the Simpson's rule approximation is accurate to within 0.00001.

Know more about Simpson's rule approximation click here:

https://brainly.com/question/30907899

#SPJ11

You had a total of 800.0 after receiving all the contributions.

To determine how much you have, simply add the amounts given by your mom, dad, aunt and uncle, and the additional 30.0.

Start with your initial amount:

370.0

Add the amount given by your mom:

150.0

Add the amount given by your dad:

150.0

Add the amount given by your aunt and uncle:

100.0

Add the additional 30.0

Now, let's calculate:

370.0 + 150.0 + 150.0 + 100.0 + 30.0 = 800.0

You had a total of 800.0 after receiving all the contributions.

for such more question on word problem

https://brainly.com/question/21405634

#SPJ11

Answer:

Step-by-step explanation:

f(-1) = 14

Simple interest is a type of interest that is calculated based on the principal amount of a loan or investment and a fixed rate of interest over a specific period of time.

To find the simple interest owed for a borrowed amount of P dollars at an annual interest rate of r for a given length of time, you can use the formula:

Simple Interest = P × r × t

where P is the principal amount ($3800), r is the annual interest rate (3.0% or 0.03 as a decimal), and t is the time in years. Since the time given is 9 months, we need to convert it to years:

9 months = 9/12 = 0.75 years

Now plug in the values into the formula:
Simple Interest = $3800 × 0.03 × 0.75
Simple Interest = $114

The simple interest that is owed is $114.

To learn more about “principal” refer to the https://brainly.com/question/25720319

#SPJ11

[tex]~~~~~~~~~~~~\textit{distance between 2 points} \\\\ (\stackrel{x_1}{-12}~,~\stackrel{y_1}{19})\qquad (\stackrel{x_2}{13}~,~\stackrel{y_2}{-11})\qquad \qquad d = \sqrt{( x_2- x_1)^2 + ( y_2- y_1)^2} \\\\\\ d=\sqrt{(~~13 - (-12)~~)^2 + (~~-11 - 19~~)^2} \implies d=\sqrt{(13 +12)^2 + (-11 -19)^2} \\\\\\ d=\sqrt{( 25 )^2 + ( -30 )^2} \implies d=\sqrt{ 625 + 900 } \implies d=\sqrt{ 1525 }\implies d\approx 39[/tex]

well, he didn't welcome 565, he's off by 20%, that means he really welcomed 80% of 565, because 100% - 20% = 80%, so

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{80\% of 565}}{\left( \cfrac{80}{100} \right)565}\implies \text{\LARGE 452}[/tex]

The correct option is B., that is, Raising prices will decrease city revenue.

To find out what would happen to city revenue if prices are raised, we need to consider the demand function and revenue equation.

The demand function given is P = 100 - 10Q, where P is the price and Q is the quantity demanded.

The revenue equation is R = P*Q, where R is the total revenue earned.

If the current price of a ride is 60, we can find the corresponding quantity demanded by setting P = 60 in the demand function and solving for Q:
60 = 100 - 10Q
10Q = 40
Q = 4

So currently, the city is selling 4 bus rides at a price of 60, which gives a total revenue of:
R = P*Q = 60*4 = 240

Now let's consider what would happen if the price is raised.

For example, if the price is raised to 70, then the demand function becomes:
70 = 100 - 10Q
10Q = 30
Q = 3

So at a price of 70, the city would sell 3 bus rides, which gives a total revenue of:
R = P*Q = 70*3 = 210

Comparing this to the current revenue of 240, we can see that raising prices would decrease city revenue.

Therefore, the correct answer is B. Raising prices will decrease city revenue.

Learn more about demand function:

https://brainly.com/question/24384825

#SPJ11

The statement "The triangles will be congruent, no matter which types of transformations are chosen for the sequence" is false.

What is Sequence?

In mathematics, a sequence is a collection of numbers or other mathematical objects that are listed in a specific order. The individual numbers in a sequence are called terms, and the position of each term in the sequence is called its index or subscript.

The choice of transformations can affect whether the triangles are congruent or not. For example, if only translations are used, the resulting triangle will be congruent to the original triangle. Similarly, if a combination of rotation(s) and reflection(s) are used, the resulting triangle may also be congruent to the original triangle.

Therefore, the type and order of transformations used can affect whether the resulting triangles are congruent or not.

Learn more about Sequence

https://brainly.com/question/7882626

#SPJ1

Answer:

Final answer is 12

Step-by-step explanation:

I have taken this class before and here is my explanation

The length of the curve y=ln(x) from x=1 to x=√(3) is approximately 0.732.

To find the length of the curve y=ln(x) from x=1 to x=√(3), we need to use the formula for arc length:

L = ∫ [1,√(3)] √[1 + (dy/dx)²] dx

First, we need to find dy/dx by taking the derivative of y=ln(x):

dy/dx = 1/x

Now we can substitute this into the formula for arc length and integrate:

L = ∫ [1,√(3)] √[1 + (1/x)²] dx

Using a trig substitution of x=tanθ, we can simplify the integrand:

dx = sec²θ dθ
√[1 + (1/x)²] = √[1 + sec²θ] = tanθsecθ

Substituting these back into the integral, we get:

L = ∫ [0,π/3] tanθsecθ sec²θ dθ
L = ∫ [0,π/3] tanθsec³θ dθ

Using a u-substitution of u=secθ, we can simplify this integral:

du/dθ = secθtanθ
tanθdθ = du/u²

Substituting these back into the integral, we get:

L = ∫ [1,√(3)] u du/u³
L = ∫ [1,√(3)] u⁻² du
L = [-u⁻¹] [1,√(3)]
L = -(√(3)⁻¹ - 1⁻¹)
L = -1 + √(3)

Therefore, the length of the curve y=ln(x) from x=1 to x=√(3) is approximately 0.732.

To learn more about length of the curve here:

brainly.com/question/31376454#

#SPJ11

We can't say the probability that a plant of this species will live longer than 126 days.

To answer this question, we need to know more information about plant species. Without this information, it is impossible to calculate the probability of a plant living longer than 126 days.

We need to know factors such as the average lifespan of the species, environmental conditions, and any potential diseases or predators that may impact the plant's survival. Please provide more details so I can assist you further.

Learn more about probability: https://brainly.com/question/13604758

#SPJ11

During that hour, the cola bottling facility increased their efficiency more compared to the water bottling facility.To determine which facility increased their efficiency more during that hour, we need to calculate the deviation from the mean for each facility.

For the water bottling facility, the deviation is calculated as:
(37.4 - 35.2) / 2.04 = 1.08
For the cola bottling facility, the deviation is calculated as:
(28.8 - 26.9) / 1.51 = 1.26
Since the deviation for the cola bottling facility is higher, this means that they had a larger increase in efficiency during that hour compared to the water bottling facility.
To determine which facility increased their efficiency more during that hour, we will calculate the number of standard deviations away from the mean for each facility's performance.
1. Calculate the deviations for each facility:
Water bottling facility:
Deviation = (Actual bottles - Mean bottles) / Standard deviation
Deviation = (37.4 - 35.2) / 2.04
Deviation ≈ 1.08
Cola bottling facility:
Deviation = (Actual bottles - Mean bottles) / Standard deviation
Deviation = (28.8 - 26.9) / 1.51
Deviation ≈ 1.26
2. Compare the deviations:
The cola bottling facility has a higher deviation (1.26) than the water bottling facility (1.08).
Conclusion:
During that hour, the cola bottling facility increased their efficiency more compared to the water bottling facility.

Lern more about Deviation here: brainly.com/question/23907081

#SPJ11

The following can be answered by the concept of Probability.

1. The probability of getting 1 or fewer successes in 8 trials with a success probability of 0.3 is 0.2590.

2. The mean is 2.4.

3. The variance is 1.68 and the standard deviation is 1.296.

1) To determine the probability P(1 or fewer), we need to calculate the probability of getting 0 successes and the probability of getting 1 success, and then add them together.

Using the formula for binomial probability:

P(X = k) = (n choose k) × p^k × (1-p)^(n-k)

Where X is the number of successes, n is the number of trials, p is the probability of success on each trial, and (n choose k) is the binomial coefficient.

For k=0:

P(X=0) = (8 choose 0) × 0.3⁰ × 0.7⁸ = 0.0576

For k=1:

P(X=1) = (8 choose 1) × 0.3¹ × 0.7⁷ = 0.2014

So P(1 or fewer) = P(X=0) + P(X=1) = 0.2590

Therefore, the probability of getting 1 or fewer successes in 8 trials with a success probability of 0.3 is 0.2590.

2) To find the mean, we use the formula:

μ = np

Where μ is the mean, n is the number of trials, and p is the probability of success on each trial.

Plugging in the values, we get:

μ = 8 × 0.3 = 2.4

Therefore, the mean is 2.4.

3) To find the variance, we use the formula:

σ² = np(1-p)

Where σ² is the variance, n is the number of trials, and p is the probability of success on each trial.

Plugging in the values, we get:

σ² = 8 × 0.3 × 0.7 = 1.68

To find the standard deviation, we take the square root of the variance:

σ = √(1.68) = 1.296

Therefore, the variance is 1.68 and the standard deviation is 1.296.

To learn more about Probability here:

brainly.com/question/30034780#

#SPJ11

To determine the value of the rate constant, we can use the integrated rate law for a first-order reaction, which is: ln([AB]₀/[AB]) = kt.

Where [AB]₀ is the initial concentration of AB, [AB] is the concentration at time t, k is the rate constant, and t is the time.
We can rearrange this equation to solve for k: k = (1/t) * ln([AB]₀/[AB]), We can use any set of data points to calculate k, but it's best to choose a set that gives a straight line when ln([AB]₀/[AB]) is plotted against time.

Let's use the first and second data points:
ln([AB]₀/[AB]) = ln(0.206/0.186) = 0.099
t = 20 min

k = (1/20 min) * 0.099 = 0.00495 min⁻¹
We can also use the other sets of data points to calculate k and check if the values are similar:

ln([AB]₀/[AB]) = ln(0.206/0.181) = 0.135
t = 40 min

k = (1/40 min) * 0.135 = 0.00338 min⁻¹
ln([AB]₀/[AB]) = ln(0.206/0.117) = 0.613
t = 120 min
k = (1/120 min) * 0.613 = 0.00511 min⁻¹

ln([AB]₀/[AB]) = ln(0.206/0.036) = 1.763
t = 220 min
k = (1/220 min) * 1.763 = 0.00801 min⁻¹

The values of k calculated using different sets of data points are similar, which indicates that the reaction is first-order. The average value of k is: k = (0.00495 + 0.00338 + 0.00511 + 0.00801) / 4 = 0.00536 min⁻¹

Therefore, the value of the rate constant is 0.00536 min⁻¹ or 5.36 × 10⁻³ min⁻¹ (rounded to three significant figures). The units of k are min⁻¹ because the time is in minutes and the concentration is in M. We can also express k in units of s⁻¹ by multiplying it by 60, which gives 0.322 s⁻¹ (rounded to three significant figures).

To know more about rate click here

brainly.com/question/199664

#SPJ11

The relation R is transitive even if it is neither reflexive nor symmetric.

(a) If A=[5,6,7], then define a relation R on A as R=(5,6),(6,5).

The reflexivity of Relation R differs from that of (5,5),(6,6),(7,7)/R).

As a result of (5, 6)R and (6, 5)R, R is now symmetric.

On the other hand, (5,5)/R/R is not transitive.

R is hence symmetric but neither reflexive nor transitive: "(5,6), "(6,5)".

(b) Consider the relation R in the statement R, which is written as R=(a,b):ab.

We have (a,a) / R for any a because a cannot be strictly less than an itself. In reality, a=a.

R has no reflex.

Right now, (1,2)R(as12)

But two is not one less than one.

There is no symmetry in the ratio (2,1)/R.

Now, let (a,b),(b,c)R.

"A,B, and C" is a transitive verb.

As a result, relation R is transitive even if it is neither reflexive nor symmetric.

To know more about transitive please check the following link

https://brainly.com/question/12947421

#SPJ4

The correct option is D)  n is 30 or larger.

To apply the Central Limit Theorem (CLT) to the sampling distribution of the sample mean, the required sample size depends on the underlying population distribution.

Specifically, the CLT states that as the sample size (n) increases, the sampling distribution of the sample mean becomes approximately normal regardless of the population distribution.

However, there are some general rules of thumb that can be used to determine if the sample size is large enough to apply the CLT:

Therefore, the answer to the question is D) n is 30 or larger.

Learn more about Central Limit Theorem

brainly.com/question/18403552

#SPJ11

The team pays d - 3 dollars for each hat after the discount.

Cost is the amount of money required to purchase or produce a particular item or service. It is often represented by the symbol "C" in mathematical equations.

According to the given information:

Let's start by breaking down the given information:

The team buys 14 hats in total.

The total cost for the 14 hats is 14(d-3) dollars.

The team received a discount on each hat purchase.

To find the cost of each hat, we need to divide the total cost by the number of hats:

cost per hat = total cost / number of hats

Plugging in the given values, we get:

cost per hat = 14(d-3) / 14

Simplifying the expression by canceling out the common factor of 14, we get:

cost per hat = d - 3

Therefore, the team pays d - 3 dollars for each hat after the discount.

To know more about discount  visit :

https://brainly.com/question/3541148

#SPJ1

The minimum duration with cruise control activated is approximately 2.67 hours. The maximum time with cruise control activated is around 2.08 hours.

Divide the maximum distance by the pace at which you are traveling to find the maximum time with cruise control on:

2.08 hours = 125 miles at 60 miles per hour

Hence, the maximum time with cruise control activated is around 2.08 hours.

To calculate the minimum time with cruise control turned on, multiply 195 miles by 60 miles per hour, which is 3.25 hours.

Subtract the time it would take you to drive 35 miles on either side of the border:

3.25 hours minus 0.58 hours (35 miles per hour x 60 miles per hour) equals 2.67 hours

Hence, the minimum duration with cruise control activated is approximately 2.67 hours.

Learn more about minimum and maximum at https://brainly.com/question/29409891

#SPJ1

Answer:

28 ft of fence

Step-by-step explanation:

Area of square  = 196 ft^2

Area of square = Length of one side ^2

Each side of Square = sqrt 196

Each side = 14 ft

2 sides of fence = 2 x 14

= 28 ft

To determine the number of green chairs and red chairs in each row, divide 54 and 36 by 9.

The total number of chairs can be expressed as the product of

9 and the 6 of the green chairs and 4 red chairs in each row.

This is represented by the expression 9(6 + 4)

Number of green chairs = 54

Number of red chairs = 36

Number of rows of chairs = 9

Number of green chairs in each row = 54/9

= 6

Number of red chairs in each row = 36/9

= 4

Ultimately, the expression can be written as 9(6 + 4)

Read more on equivalent expression:

https://brainly.com/question/15775046

#SPJ1

The hottest temperature on the edge of the elliptical plate is 32 and the coldest temperature is 8.

The edge of the elliptical plate is given by the equation [tex]x^2 + xy + y^2 = 4.[/tex]

To find the hottest and coldest temperatures on this edge, we need to find the maximum and minimum values of the function t(x,y) subject to this constraint.

One way to solve this problem is to use Lagrange multipliers. Let's define a new function F(x,y,λ) as follows:

[tex]F(x,y,\lambda) = 16x^2 + y^2 + \lambda(x^2 + xy + y^2 - 4)[/tex]

The critical points of F(x,y,λ) occur when the partial derivatives with respect to x, y, and λ are all equal to zero:

∂F/∂x = 32x + 2λx + λy = 0

∂F/∂y = 2y + 2λy + λx = 0

∂F/∂λ =[tex]x^2 + xy + y^2 - 4[/tex]= 0

Solving these equations simultaneously, we get:

[tex]x = \pm \sqrt(2), y = \pm \sqrt(2)[/tex], λ = 8/3

The function t(x,y) takes on its maximum value of 32 at the points [tex](\sqrt(2), \sqrt(2))[/tex] and [tex](-\sqrt(2), -\sqrt(2))[/tex] and its minimum value of 8 at the points [tex](\sqrt(2), -\sqrt(2))[/tex] and [tex](-\sqrt(2), \sqrt(2)).[/tex]

Therefore, the hottest temperature on the edge of the elliptical plate is 32 and the coldest temperature is 8.

Learn more about maximum and minimum values of a function

brainly.com/question/13581879

#SPJ11

Answer:

the value of x is 11.333 aproximate to 11.3

Step-by-step explanation:

71° = (9X + 40) /2

71° ×2 = 9X + 40 ........ crisscros it

142° = 9X + 40

142-40 = 9X

9X = 102

X = 102/ 9

X = 11.333 ~ 11.3

There are 11 ways to choose 10 coins from a piggy bank containing 100 identical pennies and 80 identical nickels.

To determine how many ways there are to choose 10 coins from a piggy bank containing 100 identical pennies and 80 identical nickels, you need to use combinations with repetition.

Since there are two types of coins (pennies and nickels), we can use the formula:

C(n + r - 1, r)

where n represents the number of types of coins (2 in this case), and r represents the number of coins we want to choose (10 in this case).

So, the formula becomes:

C(2 + 10 - 1, 10) = C(11, 10)

Calculating the combination, we get:

C(11, 10) = 11! / (10! * (11 - 10)!) = 11

Therefore, there are 11 ways to choose 10 coins from a piggy bank containing 100 identical pennies and 80 identical nickels.

Learn more about repetition here,

https://brainly.com/question/856690

#SPJ11

The closest value among the given options to ln(17/3) is 1.466. The value of f(2) is approximately 1.466.

To find the value of f(2), we need to first solve for the particular solution y=f(x) using the given differential equation and initial condition.

We can rewrite the differential equation as dy/dx = x^2 + e^(-y). Separating variables and integrating both sides, we get:

∫e^y dy = ∫x^2 dx + C
e^y = (1/3)x^3 + C
y = ln[(1/3)x^3 + C]

Using the initial condition f(1) = 0, we can solve for the constant C:

0 = ln[(1/3)(1)^3 + C]
C = -1/3

Thus, the particular solution is:

y = ln[(1/3)x^3 - 1/3]

To find f(2), we plug in x=2 into the equation above:

f(2) = ln[(1/3)(2)^3 - 1/3] = ln[8/3 - 1/3] = ln(7/3) ≈ 1.253

Therefore, the value of f(2) is approximately 1.253.
To find the value of f(2) for the given differential equation dy/dx = x^2 + 1/e^y with the initial condition f(1) = 0, first, we need to solve the equation. Since it is a first-order, nonlinear, separable differential equation, we can rewrite it as:

e^y dy = (x^2 + 1) dx

Now, integrate both sides:

∫e^y dy = ∫(x^2 + 1) dx

e^y = (1/3)x^3 + x + C

Apply the initial condition f(1) = 0:

e^0 = (1/3)(1)^3 + 1 + C
1 = 4/3 + C
C = -1/3

So, the particular solution is:

e^y = (1/3)x^3 + x - 1/3

To find f(2), solve for y when x = 2:

e^y = (1/3)(2)^3 + 2 - 1/3
e^y = 8/3 + 2 - 1/3
e^y = 17/3

Now, find the natural logarithm of both sides:

y = ln(17/3)

To learn more about equation visit;

brainly.com/question/29657983

#SPJ11

For cumulative distribution function;

e[v] = 1.25.

var[v] = 53.02.

we need to integrate v*fv(v) over the entire range of v?

e[v] = ∫v*fv(v) dv from -∞ to ∞

= ∫v*0 dv from -∞ to -5 + ∫v*(v+5)²/144 dv from -5 to 7 + ∫v*1 dv from 7 to ∞

= 0 + [(v³/36 + 5v²/24 + 25v/72) from -5 to 7] + 0

= [(7³/36 + 5*7²/24 + 25*7/72) - (-5³/36 + 5*(-5)²/24 + 25*(-5)/72)]

= 1.25

Therefore, e[v] = 1.25.

To find var[v], we need to first find e[v²]:

e[v²] = ∫v²*fv(v) dv from -∞ to ∞

= ∫v²*0 dv from -∞ to -5 + ∫v²*(v+5)²/144 dv from -5 to 7 + ∫v²*1 dv from 7 to ∞

= 0 + [(v⁴/48 + 5v³/36 + 25v²/144) from -5 to 7] + ∞

= [(7⁴/48 + 5*7³/36 + 25*7²/144) - (-5⁴/48 + 5*(-5)³/36 + 25*(-5)²/144)]

= 54.86

Therefore, e[v²] = 54.86.

Now we can find var[v] using the formula:

var[v] = e[v²] - (e[v])²

= 54.86 - (1.25)²

= 53.02

Therefore, var[v] = 53.02.

Learn more about cumulative distribution.

brainly.com/question/30402457

#SPJ11

(1) the typical amount of miles traveled is 10932.1 miles.

(2) the range is from 9915 up to 11983 miles.

(3) there are no such values in our data, so there is no outlier

What is the average?

This is the arithmetic mean and is calculated by adding a group of numbers and then dividing by the count of those numbers. For example, the average of 2, 3, 3, 5, 7, and 10 is 30 divided by 6, which is 5.

a-1) The typical amount of miles traveled can be given by measure of the central tendency of data.

As the mean is an unbiased estimator of the central tendency, so we will use 'Mean' as the point estimate of the central tendency representing the typical number of miles traveled.

Use the 'AVERAGE' function in Excel to get the mean of data.

For example, if the values are stored in cell range A1 to A80, then use the formula -

=AVERAGE(A1:A80)

This gives us the point estimate = 10932.1

Thus, the typical amount of miles traveled is 10932.1 miles.

-----------------------------------------------------

a-2)

Range is maximum and minimum values within which all the data lies.

As minimum value of data = 9915

And maximum value of data = 11983

So, the range is from 9915 up to 11983 miles.

a-3)

Use the following Excel functions to get the five-point summary of data -

Minimum Value =MIN(A1:A80)

First Quartile = Q1 =QUARTILE.EXC(A1:A80,1)

Median =MEDIAN(A1:A80)

Third Quartile = Q3 =QUARTILE.EXC(A1:A80,3)

Maximum Value =MAX(A1:A80)

This should give the following values -

Minimum Value 9915

First Quartile = Q1 10400

Median 10919

Third Quartile = Q3 11371

Maximum Value 11983

Then the interquartile range is -

IQR = Q3 - Q1

      = 11371 - 10400

      = 971

A value is said to be an outlier if it lies below (Q1 - 1.5*IQR) or above (Q3 + 1.5*IQR).

So, the boundary points are -

Q1 - 1.5*IQR = 10400 - 1.5(971)

                     = 8943.5

And, Q3 + 1.5*IQR = 11371 + 1.5(971)

= 12827.5

So, any value less than 8943.5 or greater than 12827.5 would be an outlier.

As there are no such values in our data, so there is no outlier.

Hence, (1) the typical amount of miles traveled is 10932.1 miles.

(2) the range is from 9915 up to 11983 miles.

(3) there are no such values in our data, so there is no outlier.

To learn more about the average visit:

https://brainly.com/question/20118982

#SPJ1

The unknown number is -50.

Let's start by translating the given statement into an equation.

"The quotient of a number and negative five" can be written as x/(-5), where x is the unknown number. "Increased by negative seven" means we add -7 to this expression. Finally, we are told that this expression is equal to three. Putting it all together, we get:

x/(-5) - 7 = 3

We can simplify this equation by adding 7 to both sides:

x/(-5) = 10

Multiplying both sides by -5, we get:

x = -50

So the unknown number is -50.

To know more about equation

brainly.com/question/29657983

#SPJ1

g(x) and d(x) are associates in F[x], which means there exists a nonzero c ∈ F such that g(x) = c · d(x). Thus, every gcd of a(x) and b(x) has the form c · d(x) for some nonzero c ∈ F.

First, let's prove that if d(x) is a gcd of a(x) and b(x), then c · d(x) is also a gcd of a(x) and b(x) for every nonzero c ∈ F.

Let e(x) be a common divisor of a(x) and b(x) in F[x]. Then we have:

a(x) = e(x) q(x)

b(x) = e(x) r(x)

for some q(x), r(x) ∈ F[x]. Since d(x) is a gcd of a(x) and b(x), we have d(x) | e(x), which means there exists a polynomial s(x) ∈ F[x] such that e(x) = d(x) s(x). Therefore,

a(x) = d(x) s(x) q(x) = c · d(x) (s(x) q(x))

b(x) = d(x) s(x) r(x) = c · d(x) (s(x) r(x))

which shows that c · d(x) is also a common divisor of a(x) and b(x). Since this holds for every nonzero c ∈ F, we can conclude that c · d(x) is a gcd of a(x) and b(x).

Next, we need to show that every gcd of a(x) and b(x) has the form c · d(x) for some nonzero c ∈ F. Let g(x) be a gcd of a(x) and b(x), and let d(x) be another gcd of a(x) and b(x). Then we have:

g(x) | d(x) (since d(x) is also a gcd of a(x) and b(x))

d(x) | g(x) (since g(x) is a gcd of a(x) and b(x))

Therefore, g(x) and d(x) are associates in F[x], which means there exists a nonzero c ∈ F such that g(x) = c · d(x). Thus, every gcd of a(x) and b(x) has the form c · d(x) for some nonzero c ∈ F.

Combining these two results, we can conclude that if d(x) is a gcd of a(x) and b(x), then so is c · d(x) for every nonzero c ∈ F, and conversely, every gcd of a(x) and b(x) has the form c · d(x) for some nonzero c ∈ F.

Learn more about “  common divisor  “ visit here;

https://brainly.com/question/29199768

#SPJ4