12 g of magnesium ribbon was heated in a crucible. At the end of the reaction 20 g of magnesium oxide had been produced. What mass of oxygen had reacted with the magnesium?.

The new pressure of a nitrogen gas at STP is 0.021atm.

The pressure of a gas can be calculated by using the combined gas law equation as follows:

P₁V₁/T₁ = P₂V₂/T₂

Where;

At STP, a gas has the following:

0.073 × 1/273 = 4.53 × P/353

0.0002674 × 353 = 4.53P

P = 0.021atm

Therefore, 0.021atm is the pressure of the nitrogen gas.

Learn more about pressure at: https://brainly.com/question/10175101

#SPJ1

The new pressure of the gas would be  0.0208 atm.

According to the general gas law, the ratio of the product of the pressure and volume to its temperature is constant.

The general gas law is summarily expressed as the following equation:

[tex]p_1v_1/t_1[/tex] = [tex]p_2v_2/t_2[/tex]. where:

[tex]p_1[/tex] = initial pressure of a gas

[tex]v_1[/tex] = initial volume of the gas

[tex]t_1[/tex] = initial temperature of the gas

[tex]p_2[/tex] = final pressure of the gas

[tex]v_2[/tex] = final volume of the gas

[tex]t_2[/tex] = final temperature of the gas

In this case:

[tex]p_1[/tex] = standard pressure = 1 atm

[tex]v_1[/tex] = 73 mL or 0.073 L

[tex]t_1[/tex] = standard temperature = 273 K

[tex]p_2[/tex] = ?

[tex]v_2[/tex] = 4.53 L

[tex]t_2[/tex] = 80 + 273 = 353 K

[tex]p_2[/tex] = [tex]p_1v_1t_2/t_1v_2[/tex]

   = 1x0.073x353/273x4.53

   = 25.769/1236.69

    = 0.0208 atm

Thus, the new pressure of 73.0 mL nitrogen that was heated to a volume of 4.53 L at STP is 0.0208 atm.

More on the general gas law can be found here: https://brainly.com/question/28865392

#SPJ1

The chemical formula of bleaching powder is Ca(ClO)₂.

Bleaching powder is a commercial product used for sanitation purposes. They are mainly used to disinfect drinking water and sanitize pools.

Chemically, this product is referred to as calcium hypochlorite. The formula of calcium hypochlorite is  Ca(ClO)₂.

This compound is a white solid that has a strong smell of chlorine. This compound is produced by the reaction between chlorine (Cl) gas and slaked lime ((Ca(OH)₂).

This reaction equation is given as:

[tex]\mathrm{2Cl_2 + 2Ca(OH)_2} \rightarrow \mathrm{Ca(OCl)_2 + CaCl_2 + 2H_2O}[/tex]

Besides calcium hypochlorite, bleach also contains calcium hydroxide and calcium chloride. But calcium hypochlorite is more so the formula.

To know more about bleaching powder:

https://brainly.com/question/2543364

Answer:

NO: +2
NO2: 3
N2O3: +3
N2O4: 4
N2O5: 5

Explanation:

Milliliters of a 0.150 m HCl solution are needed to neutralize 25.85 ml of a 0.375 m KOH solution is 172 ml

Milliliters is the very small amount if liquid

Here given data is

HCl solution =  0.150 m

KOH solution =  0.375 m

Neutralize = 25.85 ml

We have to calculate milliliters = ?

And the reaction is

HCl + KOH → KCl + H₂O

Molarity = mol solute/ L solution

Mol KOH = (0.375 mol/L) 25.85 ml = 0.02585 L =  0.02585 mole of KOH

The coefficients of the chemical equation to find the relative number of moles of HCl

0.02585 mole of KOH ( 1mol HCL/1 mol KOH) =  0.02585 mol HCl

Molarity equation again to find the volume of HCl solution

Molarity = mol solute/ L solution

L HCl solution = 0.02585 mol HCl/ 0.150 m = 0.172 L = 172 ml

Know more about solution

https://brainly.com/question/23804234

#SPJ4

Standardization of a solution is performed by titration. The NaOH will be titrated into a known quantity of acid. Faint pink color is obtained.

Standardization of a solution is carried out by way of titration. The NaOH might be titrated into a recognised quantity of acid. In this situation, the amount of NaOH delivered to the acid is recorded, and the use of that price, the concentration of NaOH is calculated.

For the standardization of the NaOH solution, the endpoint turned into continuously reproduced to a faint pink color. But, the endpoint for the titration of the acid answer turned into constantly reproduced to a dark pink color.

You'll standardize NaOH and HCl solutions so you realize the precise attention and then put together samples of common family objects with a purpose to determine the amount of calcium in  Mg(OH)2 in Milk of Magnesia, and many others.

Learn more about titration here:- https://brainly.com/question/24103597

#SPJ4

Answer:

Density is mass divided by volume (ρ=m/v), and water was used as the basis for establishing the metric unit of mass, which means a cubic centimetre (1cm3) of water weighs one gram (1g). So, 1g/1cm3 = 1 g/cm3, giving the water its easy-to-remember density.

Explanation:

Please give the brainliest.

Monomers of condensation polymers must contain two functional groups so that each monomer can link with two other monomers

What are condensation polymers?

whar ar esters?

Learn more about condensation polymers at https://brainly.in/question/27753546

#SPJ4

when vinegar combines with the calcium carbonate, the acetic acid and the calcium carbonate come apart and reform in different ways to make new chemicals. One of them is the gas carbon dioxide.

The molar mass of CaCO3 is 100.0 g/mole so you need 727300g or 727.3 kg of limestone. Calcite or aragonite are the most common forms of limestone, a sedimentary rock mostly made of calcium carbonate (CaCO3). It could have a significant magnesium carbonate content (dolomite).

Lime, the base calcium oxide, is left behind after heating the limestone (calcium carbonate). The original limestone will be replaced with white lime that is more crumbly in texture. Water and calcium carbonate do not react.

To know more about  limestone(calcium carbonate) visit : brainly.com/question/15148363

#SPJ4

180 mL of hydrochloric acid needs to be mixed with 1500 milliliters of water to make a solution that is 12% acid.

What is a mixture?
A mixture is a substance made up of two or more chemical compounds with different properties that are not chemically connected. The physical combination of two or more substances results in solutions, suspensions, or colloids, which retain the separate identity of the individual constituents.

The amount of hydro chlorocalcite will be calculated as below:- 1500x12

Hence, 180 mL of hydrochloric acid needs to be mixed with 1500 milliliters of water to make a solution that is 12% acid.

To learn more about mixture from the given link.
https://brainly.com/question/24647756
#SPJ4

From the idea of the Bohr model, each of the electrons would emit a characteristic  wavelength thus four wave lengths are emitted.

We know from the Bohr model that when an electron jumps from a higher to a lower energy level, there is the emission of light of the appropriate wavelength.

Now we know that the energy that is evolved is what determines the wavelength of the light since the wavelength is inversely proportional to the energy that is evolved by the electronic transition.

Learn more about Bohr model:https://brainly.com/question/3964366

#SPJ1

Answer:

1. Acid - Red

2. Base - Yellow

3. Salt - Yellow if the reaction produces a base

Explanation:

In an acidic medium, methyl orange turns red, while in a basic medium, it turns yellow.

Sodium chloride solution produces sodium hydroxide, NaOH which is a strong base. Using methyl orange as an indicator gives a yellow colour solution for NaOH.

There are acidic, neutral, and basic salts. Sodium chloride (NaCl) produces a base therefore it would turn yellow as well but likely less distinct than the base.

Answer:

Hello methyl orange is a pH indicator that is commonly used.

If you drip methyl orange to an acidic liquid it will give you the color red.

If it turns yellow after you drip it then the liquid should be a base.

And it gives a yellowish color for neutral liquids

But in this case salt (NaOH) has an exceptional situation which turns orange after adding m.o.

There is no logical explanation (at least for high school level) I am afraid that you need to memorize it.

This chard attached below may help you to recognize it

good luck, hope it helped<3!

The major organic product isolated from the reaction of 3-hexyne with ozone followed by hydrolysis is Propanoic acid by the ozonolysis

Ozonolysis is a method of  cleaving alkenes by oxidation reaction  or alkynes using ozone (O3), which is reactive allotrope of oxygen. The process allows for carbon-carbon double or triple bonds to be replaced by double bonds with oxygen.

This reaction is often used to identify the structure of unknown alkenes by breaking them down into smaller and more easily identifiable pieces. Ozonolysis also does occurs naturally and would break down repeated units which are used in rubber and other polymers.

The major organic product isolated from the reaction of 3-hexyne with ozone followed by hydrolysis is Propanoic acid.

To know more about ozonolysis

https://brainly.com/question/14356308

#SPJ4

the phase of the copper product after the reaction in the copper cycle is listed below

1.the heating of Cu(OH)2 to form CuO i.e

Cu(OH)2 (s) ⇒ CuO(s) + H2O (l) which means the product of copper is in a solid phase after the reaction.

2.the addition of NaOH to Cu(NO3)2 to form Cu(OH)2 i.e

Cu(NO3)2 (aq) + NaOH (aq) ⇒Cu(OH)2 (s) + 2NaNO3 (aq) which means the product of copper is in the solid phase after the reaction.

3. the addition of HCL to CuO to form CuCl2 i.e

2 CuO(s) + 2 HCl(aq)  ⇒ 2 CuCl2(aq) + H2O (aq) which means the product of copper is in the aqueous/liquid phase after the reaction.

4. the addition of Al to CuCl2 to form Cu i.e

Al(s) + CuCl2(aq) ⇒ AlCl3(aq) + Cu(s) which means the product of copper is in a solid phase after the reaction.

learn more about the phase here;

https://brainly.com/question/25664350

#SPJ4

The following elements could be represented by x as sb.

Elements are represented by their chemical symbols sometimes with atomic and mass numbers, as shown below. The mass number is the sum of the number of neutrons and protons in the nucleus. Scientists have standardized a simple way to represent elements with their chemical symbols.

One of the main reasons for development is that using letters is the easiest way to represent elements. Another reason to use chemical symbols is that they make it easier to write chemical formulas. The periodic table is a tabular arrangement of the chemical elements from hydrogen which has the lowest atomic number to oganesson which has the highest atomic number. The atomic number of an element is the number of protons in the nucleus of that element.

Learn more about An unknown element here:-https://brainly.com/question/27753952

#SPJ4

Therefore, for the conversion, we want the molarity of the solute as well as the density of the solution.

The molecule is the thing that needs to dissolve, and the solution is the thing that needs to dissolve it. With a wide variety of solutes and solvents, solutions can be created. We are aware of a wide range of solutions.

A solute is a material that dissolves in a solution. The solvent concentration present in fluid solutions is higher than the quantity of content. The two most common examples of solutions in daily life are salt and water.

To know more about Solute visit:

https://brainly.com/question/8851236

#SPJ4

Competing reactions:

Desired - RX + Mg ⇒ RMgX rate ~ [RX]

Side - RX + RMgX ⇒  R-R + MgX2 rate ~ [RX]²

The desired reaction is favored by keeping the [RX] low so that it reacts with Mg and not RMgVia the Schlenk equilibrium Grignard reagents form varying amounts of organomagnesium compounds. Alkyl halides react with magnesium metal in anhydrous ether solvents to form organometallic reagents.

Grignard reagents are formed by the reaction of magnesium metal with alkyl or alkyl halides. They are wonderful nucleophiles that react with electrophiles such as carbonyl compounds and epoxides. Since Grignard reagents are strongly basic, they often undergo elimination reactions or do not react at all. The transition state of the alkyl halide substitution is less stable than the magnesium bromide complex. This is due to ligation formation between the solvent and magnesium atoms.

Learn more about The concentration here:-https://brainly.com/question/17206790

#SPJ4

The new volume of a 4.00-liter sample of CO(g) when its pressure changes from 10.0 kPa to 70.0 kPa is 0.57L.

Boyle's law states that the pressure of an ideal gas is inversely proportional to its volume at constant temperature.

The volume of a gas can be calculated using the Boyle's law equation as follows:

P₁V₁ = P₂V₂

Where;

According to this question, a 4.00-liter sample of CO(g) had its pressure changed from 10.0 kPa to 70.0 kPa. The new volume can be calculated as follows:

4 × 10 = V₂ × 70

40 = 70V₂

V₂ = 0.57L

Therefore, 0.57L is the new volume of the gas.

Learn more about Boyle's law at: https://brainly.com/question/23715689

#SPJ1

Magnesium oxide is not composed of [tex]Mg^{+}[/tex] and [tex]O^{-}[/tex] ions because of the balanced chemical reaction.

A reaction is said to be balanced chemical reaction when the number of the atoms involved in the reactants side is equal to the number of atoms in the products side. For example in the chemical reaction, nitrogen (N2) reacts with hydrogen (H) to produce ammonia (NH3). The reactants are nitrogen and hydrogen, and the product is ammonia.

In the above given case when we write the balanced chemical reaction for the formation of Magnesium oxide it is as follows;

 2Mg + [tex]O_{2}[/tex] ⇄ 2MgO

From this reaction we can clearly see that 2 molecules of magnesium is reacting with one molecule of oxygen. So each magnesium will loose one electron to bond with oxygen so since there are 2 magnesium atoms the total charge on the ion would be [tex]Mn^{2+}[/tex] and similarly in case of oxygen it would be [tex]O^{2-}[/tex]

To know more about balanced chemical reaction

https://brainly.com/question/13451900

#SPJ4

Using an acetic acid\sodium acetate buffer solution, ratio of acid to conjugate base that will be needed to maintain the pH at 5.00 is 1:1.

For having, effective buffer, the number of moles of the weak acid and its conjugate base must be large as compared to the number of moles of strong acid /base that is added. The best buffering occur when the ratio of [HA] to [A-] is 1:1.

To know more about buffer solution, refer

https://brainly.com/question/8676275

#SPJ4

The orbital period is proportional to r^(3/2) and does not depend on the satellite's mass. Any object at Jupiter's position will have the same orbital period regardless of mass. The correct answer is 11.9 yr. Option C.

As the Earth rotates on its axis creating day and night, it travels around the Sun in an elliptical orbit taking about 365 1/4 days to complete. The Earth's rotation axis is tilted with respect to the orbital plane. This creates seasons. The elliptical nature of the Earth's orbit is due to the first forces pushing the Earth away from the Sun's disk.

The momentum of this throw being greater the Earth's orbit would have been more elliptical or it might have been completely ejected from the solar system forever. The Earth's orbit defines a two-dimensional plane called the Ecliptic. It takes about 365 days for the earth to revolve around the sun. After years of analysis, Kepler found that Mars' orbit was likely elliptical, with the Sun at one of his focal points of the ellipse. This led Kepler to discover that all planets orbit the Sun in elliptical orbits and that the Sun is at one of his two focal points.

Learn more about The mass here:-https://brainly.com/question/26150306

#SPJ4

The statement atoms in the original substances are arranged in a different way to make new substances correctly describes a change that occurs during a chemical reaction (Option A).

A chemical reaction is a process in which atoms arrange in different ways to form a new substance known as the product of the reaction while initial molecules are the reactants.

Therefore, with this data, we can see that a chemical reaction starts with certain molecules called reactants that have a arrangement while this process ends with molecules which are known as products of such reactions.

Learn more about chemical reactions here:

https://brainly.com/question/11231920

#SPJ1

To learn the mole concept and standard temperature.

What is standard temperature?

Therefore, 0 degrees Celsius, which translates to 32 degrees Fahrenheit or 273.15 degrees Kelvin, is considered the standard temperature. This is essentially the temperature at which pure water at sea level will freeze when exposed to air at standard pressure.

What is mole?

A mole is a crucial unit of measurement used by chemists. Similar to how having a dozen eggs means you have twelve eggs, having a mole of something indicates that you have 602,214,076,000,000,000,000,000 of that particular thing. Chemists must measure very small objects, such as atoms, molecules, or other particles, using moles.

Therefore there are 0.125 moles of water vapor present.

Learn more about standard temperature from the given link.

https://brainly.com/question/21021354

#SPJ4

The density of the gas will decrease as we heat the gas.

Density of a system is defined by mass per unit volume. Density basically describes how compact or concentrated something is. For example, suppose you have two boxes, one is large and one is small. However, they both weigh the same. But we see that  the small box has a higher density than the large box. So, density also tells how concentrated or crowded something is.

Considering the above given case, when  we take a gas sample in a balloon and then when we start to heat this sample, due to hear we can see that the gas molecules will try to move more far from each other and therefor the density of the system will decrease. This same concept is been used in hot air balloons too. When we heat the balloon the density of the gas will decrease and therefor the balloon floats in the air.

To know more about density

https://brainly.com/question/15164682

#SPJ4

Half life for remaining 5 days is 80. e-0.25 .

Half life period is the time needed by a radioactive substances to transform into a different substance. It is the interval of time required for the one half of the atomic nuclei of a radioactive sample to decay. Half life is calculated by finding the decay constant of a substance then dividing it by 2. Decay constant of a radioactivity is probability of decay per unit time.

Here half life 32P is 5 days.

The concentration of the radioactive isotope is the total amount of radioactivity per unit volume. The expression for calculating concentration of radioactive isotope  at half life is ,

    [A] = [A] e-kt

t1/2= 0.693/K

K= 0.693/ t1/2=0.05days

Now substituting value of K and t in the expression

[A]= [A]e-kt

    = 80 .e-0.25

to learn more about half life please visit:

https://brainly.com/question/1160651

#SPJ4

To make 300 ml of Ammonium sulfate solution 158.5 grams of Ammonium sulfate should be taken.

Given,

Molarity of Ammonium sulfate = 4 M

Volume of solution = 300 mL = 0.3 L

Molar mass of Ammonium sulfate = 132.14 g/mol

Mass = Molarity × Molar mass × Volume of solution in Litres

Substituting the values we get,

Mass of the (NH₄)₂SO₄ = 4 M × 132.14 g/mol × 0.3 L

                                      = 158.5 g

Hence, the mass of Ammonium sulfate required to make 300 ml of Ammonium sulfate solution is 158.5 grams.

Learn more about Ammonium sulfate solution from the link given below.

https://brainly.com/question/14836905

#SPJ4

NO2 is the formula of the compound that reacts with water to form HNO3.

What is a chemical compound?

A chemical compound is a substance made up of several similar molecules (or molecular entities) that contain atoms from more than one chemical element and are bound together by chemical bonds. A molecule made up of only one element's atoms is hence not a compound. A chemical reaction can change a compound into a distinct substance, which may entail interactions with other chemicals. Bonds between atoms may be disrupted and/or new bonds generated during this process. Compounds are classified into four categories based on how the constituent atoms are linked together. Covalent bonds hold together molecules; ionic bonds hold together ions; metallic bonds hold together intermetallic compounds; and coordinate covalent bonds hold together coordination complexes.

NO2 is the formula of the compound that reacts with water to form HNO3.

Nitrous dioxide reacts with water to form nitric acid.

To know more about chemical compounds, click on the link

https://brainly.com/question/26487468

#SPJ4

The wavelength (cm) of radiation if its frequency is 1.50 x 1010 KHz is 2 × 10^(-7) m.

Frequency is defined as the number of occurrences of the Repeating event per unit of time. It is also defined as the occasionally which referred to as the temporal frequency which emphasize the contrast to the spatial frequency, and the ordinary frequency which emphasize the contrast to angular frequency.

Wavelength is defined as the distance between the two identical points (or adjacent crests) in the adjacent cycles of the waveform signal which is propagating in space or along a wire. In wireless systems, this length is mainly specified inc centimeters (cm), meters (m), or millimeters (mm).

As we know that,

Frequency is inversely proportional to the wavelength.

w = c / f

Given,

speed of. light = 3 × 10^6

w = 3 × 10^6/ 1.50 x 10^(13)

= 2 × 10^(-7) m.

Thus, we concluded that the wavelength (cm) of radiation if its frequency is 1.50 x 1010 KHz is 2 × 10^(-7) m.

learn more about frequency:

https://brainly.com/question/13040523

#SPJ1

Answer: 91.5 kJ

Explanation:

The answer is 0.0392 mol of Cu atoms.

Solution:

1 Cu atom = 1.06 X10-22 g

we know that

1 mol of cu = 6.022 x10²³ atoms Cu

= 6.022 x 10²³ x 1.06 X10-22g

= 63.83g

∴ Mass of 1 mol cu is 63.83 g

NOW, 63.83g = 1 mol Cu

2.5g = [tex]\frac{1 mol x 2.5g}{63.83g}[/tex]

0.0392 mol of Cu atoms.

The molar mass of a molecular compound is the mass of the molecule in grams. It was a British penny. That's why we call the dime a penny. In 1857, Congress asked the Mint to make his dime smaller and mix copper and nickel.

Learn more about A copper atom here:-https://brainly.com/question/3157958

#SPJ4

Vitamins are an important nutrient that the body needs to grow, develop, and carry out its functions normally. These nutrients are classified as macronutrients or micronutrients, which means the body needs them in small amounts. Generally, vitamins come from organic foods and fruits.

Not all vitamins can be produced by the body, so humans still need vitamins as additional nutrition. Vitamins and minerals are nutrients that fall into the category of micronutrients. The body requires levels of vitamins and minerals in small amounts.

Some types of vitamins that are known are:

Vitamins A, C, D, E, K,

B vitamins, including thiamin (B1), riboflavin (B2), niacin (B3), pantothenic acid (B5), pyridoxal (B6), cobalamin (B12) , biotin, and folic acid/folate.

#SPJ4