Answer:
See explanation.
Explanation:
Hello there!
In this case, for the required chemical reactions, we proceed as follows, by considering that the left-handed elements stand for the cations and the right-handed ones for the anions:
1:
1. [tex]Na_2CO_3(aq)\rightarrow 2Na^+(aq)+(CO_3)^{2-}(aq)[/tex]
2. [tex]FeBr_3(aq)\rightarrow Fe^{3+}(aq)+3Br^-(aq)[/tex]
3. [tex]Al_2(SO_4)_3(aq)\rightarrow 2Al^{3+}(aq)+3(SO_4)^{2-}(aq)[/tex]
2: In this case, we can represent the formula equation first according to the neutralization reaction:
[tex]3NaOH(aq)+H_3PO_4(aq)\rightarrow Na_3PO_4(aq)+3H_2O(l)[/tex]
Which is worded as: three molecules of aqueous sodium hydroxide reacts with one molecule of aqueous phosphoric acid to yield one molecule of aqueous sodium chloride and three molecules of liquid water.
Regards!
How many moles are in 9.83 x 1021 atoms of Na
Answer:
0.016 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
[tex]n = \frac{9.83 \times {10}^{21} }{6.02 \times {10}^{23} } \\ = 0.01632...[/tex]
We have the final answer as
0.016 molesHope this helps you
What is true of an earthquake that causes major damage to buildings in an area?
It has a high magnitude.
It has a high frequency.
It has a low frequency.
It has a low magnitude.
The correct option is :
=》It has a high magnitude.
the damage caused by an earthquake is proportional to its magnitude, as much the magnitude is, that much damage will be caused by it.
The term used to indicate and earthquake that causes major damage to buildings in an area is called a high magnitude earthquake. Hence, option a is correct.
What is high magnitude earthquake?The most typical way to gauge an earthquake's size is by its magnitude. No matter where you are or how violent the shaking is, it is the same number since it represents the size of the earthquake's source.
The USGS no longer uses the outmoded Richter scale to determine the magnitude of major, teleseismic earthquakes. Several magnitude scales measure various aspects of the earthquake, but the Richter scale measures the biggest wobble (amplitude) on the recording.
Currently, the USGS uses the Moment Magnitude scale to report earthquake magnitudes, however many different magnitudes can be calculated for comparison and research. Therefore, option a is correct.
Find more on earthquakes:
https://brainly.com/question/29500066
#SPJ3
131.39 g/mol C2HCl3
find the molecular formulas
Answer:
Find the mass of 1 mole.
mass of
1
mole of
131.39
g
m
o
l
C
2
H
C
I
⋅
3
=
37.04000067
g
Explanation:
hope it helps make brainlliest ty
Please someone answer this asap
Answer:
b or c but I would just pick c
Answer:
C
Explanation:
Sun is an energy source not a matter.
The number of atoms in a 158.4 g sample of CO2 gas at STP is:
1.277 x 1025 atoms
2.167 x 1024 atoms
6.502 x 1024 atoms
6.651 x 1024 atoms
Answer:
Option B, 2.167 x 1024 atoms
Explanation:
1 mole of CO2 = 44.01 grams
Number of moles of CO2 in 158.4 gram sample
[tex]\frac{158.4}{44.01} \\3.95[/tex]moles
Number of atoms in one mole is [tex]6.02*10^{23}[/tex]
Number of atoms in 3.95 moles [tex]2.167 *10^{24}[/tex]
Hence, option B is correct
Select the correct answer.
What quantity might be measured in units of kilograms?
A.
the brightness of a candle
B.
the volume of a bottle
C.
the mass of a marble
D.
the electric current in a wire
Answer:
The mass of a marble.
Explanation:
Units of the other answers:
A: Light - Lumen (lm)
B: Volume - cm^3
D: Electric current - Ampere
ii) Sodium thiosulphate dissolves in dilute nitric acid at a steady rate. Copy out which
of the following changes would quicken up the reaction- 3
a. Cooling the reacting vessel to drop the temperature.
b. Breaking the reactants into smaller pieces.
c. Adding more concentrated acid.
d. Using more sodium thiosulphate.
Answer:
d
Explanation:
You tested the rocket with three mixtures of fuel having different masses of oxygen
and hydrogen. What is the relationship between the masses of oxygen and hydrogen in
each of the tests?
Answer:
As the oxygen is only transferred from the copper oxide to form water inside the apparatus, any gain in mass is due to hydrogen combined with the oxygen to form water. The ratio of the two masses enables the mass of oxygen combining with 1 g of hydrogen to be calculated.
Hydrogen and oxygen are the elements used as fuels in rockets as they are propellants. In each of the tests, the ratio of the mass of hydrogen to oxygen is 1:8.
What is the combustion of rocket fuel?Combustion has been the chemical reaction that involves reactants combining and reacting with oxygen resulting in heat and light formation. They are majorly used in propelling engines and in rocket fuels.
In a rocket engine oxygen acts as the oxidizer that reacts with hydrogen atoms to derive the heat and energy so that the engine can move and produce thrust. It uses Newton's third law to create energy and accelerate upwards.
The mixtures of fuel contain various masses that are present in a ratio of 1:8 (hydrogen: oxygen) as masses of hydrogen are 1, 2, and 5 mg, whereas oxygen is 8, 16, and 40 mg. It can be concluded that 1 part of hydrogen reacts with 8 parts of oxygen in the rocket fuel mixture.
Therefore, the rocket fuel mixtures contain a 1:8 ratio of the masses of hydrogen: oxygen that undergoes combustion reaction.
Learn more about combustion, here:
https://brainly.com/question/14335621
#SPJ2
At a pressure of 1 atm, the temperature 115.9 K is called the fill in the blank 1 of Kr . The normal boiling point for Kr is at K The triple point pressure for Kr is atm The critical pressure for Kr is 54.3 atm. At temperatures above 209.4 K and pressures above 54.3 atm, Kr is a _________ . Kr is a _________ at 50.3 atm and 105 K. Kr is a _________ at 0.720 atm and 131 K. Kr is a _________ at 1.00 atm and 118 K.
Answer:
melting point, 119.8 K, 0.72 atm, supercritical fluid, solid, gas, liquid.
Explanation:
Let's refer to the phase diagram (not to scale) for krypton.
At a pressure of 1 atm, the temperature 115.9 K is called the melting point of Kr, and it is the temperature at which it passes from solid to liquid.
The normal boiling point for Kr is at 119.8 K, which is, at 1 atm, the limit between the liquid and the gas state.
The triple point pressure for Kr is 0.72 atm, as can be seen in point C.
The critical pressure for Kr is 54.3 atm.
At temperatures above 209.4 K and pressures above 54.3 atm, Kr is a supercritical fluid, according to the region it is in the phase diagram.
Kr is a solid at 50.3 atm and 105 K, according to the region it is in the phase diagram.
Kr is a gas at 0.720 atm and 131 K, according to the region it is in the phase diagram.
Kr is a liquid at 1.00 atm and 118 K, according to the region it is in the phase diagram.
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 72 days?
A.
392 mg
B.
195 mg
C.
97.5 mg
D.
48.75 mg
Answer: D. 48.75
Explanation: just took the test
Answer:
D
Explanation:
I got this question right on my test.
Becky wants to model an ecosystem. Which of the following modeling tools would best help her illustrate an ecosystem?
A.
a rubber ball
B.
a terrarium
C.
a map
D.
a set of building blocks
Answer:
c
Explanation:
2 Which of the gases in air are elements? Explain how you can tell.
Answer:
I'll explain.
Explanation:
The molecules of two different elements, nitrogen and oxygen, make up about 99 percent of the air. The rest includes small amounts of argon and carbon dioxide. Oxygen is the life-giving element in the air. You can tell because they're on the periodic table which is a table for elements.
Explanation:
nitrogen and oxygen are the gases in the air which are elements you can simply say it by looking the periodic table
What is the difference between how a mercury barometer and an aneroid barometer measure air pressure?
Answer:
Aneroid barometer and mercury barometer are such two types. The main difference between aneroid and mercury barometer is that aneroid barometer measures the atmospheric pressure using the expansion of a metal whereas mercury barometer measures the atmospheric pressure by adjusting the height of mercury inside a tube.
Explanation:
_____ is the process of linking smaller molecules to form long chains of higher molecular weight.
In a reaction, the actual yield is always at least as large as the theoretical yield.
True or false.
give short explanation on answer
what is the chemical equation for aq nitrate ion reacts with s arsenic trihydride and produces s arsenic and g ammonia?
Answer:
Explanation:
The half-life for a 400-gram sample of radioactive element X is 3 days. How much of element X remains after 15 days have passed?
A.
12.5 g
B.
25 g
C.
50 g
D.
100 g
Answer:
The correct answer is - A. 12.5 gram.
Explanation:
Given:
The initial amount of sample = 400 gram
the half-life cycle = 3 days
after 15 days remain value = ?
Solution:
The number of half-lives in 15 days = 15/3
= 5 half-lives
the remaining amount of sample after one half-life 3 days = 400/2 = 200
the remaining amount of sample after 2nd half-life or 6 days= 200/2 = 100
the remaining amount of sample after 3rd half-life or 9 days= 100/2 = 50
the remaining amount of sample after 4th half-life or 12 days= 50/2 = 25
the remaining amount of sample after 5th half-life or 15 days= 25/2 = 12.5 gram
Thus, the correct answer is = 12.5 g.
Which of the following is a characteristic shared by all living things?
A. They have tissues and organs,
B. They take in oxygen.
C. They make more individuals of the same kind.
D. They move.
How does nitrogen in the atmosphere become beneficial to plants and eventually animals?
O Nitrogen must be mixed in the soil by earthworms,
O Nitrogen must be converted into a useful form by bacteria,
O Nitrogen must come in contact with decaying organic material,
O Nitrogen must come in contact with the ground through rainfall
Answer:
O Nitrogen must be converted into a useful form by bacteria.
This bacteria is called the nitrogen fixing bacteria such as the Rhizobium bacteria.
Write out and balance the chemical equation:
A solution of nickel (II) chloride reacts with a solution of potassium hydroxide
to produce solid nickel (II) hydroxide and a solution of potassium chloride.
Explanation:
NiCl2 + KOH = NiOH + KCl
since nickel is the primary element in nickel ii chloride, find the oxidation no of nickel in the compound and chlorine should have 2 as a subscription since the ii in the compound represents that nickel has an oxidation no of 2
[H3O+] = 2.9 x 10-10 M
ph level
Answer:
9.54
Explanation:
Fr the question given above, the following data were:
Concentration of hydronium ion [H3O⁺] = 2.9x10¯¹⁰ M
pH =?
The pH of the solution can be obtained as follow:
pH = –Log [H3O⁺]
pH = –Log 2.9x10¯¹⁰
pH = 9.54
Thus, the pH level of the solution is 9.54
Which statement best explains the genetic variation that results from sexual
reproduction?
A. Each chromosome contains many different genes.
B. Offspring receive a mix of genes from two different parents.
c. Offspring receive genes that are exactly the same as one parent's
genes.
O D. Each chromosome contains many copies of the same gene.
Answer:
Each chromosome contains many copies of the same gene
Answer:
Offspring receive a mix of genes from two different parents
Good luck!
Consider the oxidation of sodium metal to sodium oxide described by the balanced equation:
4 Na + O2 → 2 Na2O. What is the theoretical yield of Na2O in grams from 9.0 mol of O2?
show steps
Answer:
1116 g.
Explanation:
The balanced equation for the reaction is given below:
4Na + O₂ —> 2Na₂O
From the balanced equation above,
1 mole of O₂ reacted to produce 2 moles of Na₂O.
Next, we shall determine the theoretical yield of Na₂O. This can be obtained as follow:
From the balanced equation above,
1 mole of O₂ reacted to produce 2 moles of Na₂O.
Therefore, 9 moles of O₂ will react to produce = 9 × 2 = 18 moles of Na₂O.
Finally, we shall determine the mass in 18 moles of Na₂O. This can be obtained as follow:
Mole of Na₂O = 18 moles
Molar mass of Na₂O = (23×2) + 16
= 46 + 16
= 62 g/mol
Mass of Na₂O =?
Mass = mole × molar mass
Mass of Na₂O = 18 × 62
Mass of Na₂O = 1116 g
Thus, the theoretical yield of Na₂O is 1116 g.
I need the correct answers
Answer:
Acids: Tastes Sour
Has a ph less than 7
Base: Bitter
Has a ph greater than 7
slippery
Acid&Base: Conducts electricity
How many grams of N2 is needed to produce 2000 grams NH3?
Answer:
1644 g
Explanation:
Step 1: Write the balanced equation
N₂ + 3 H₂ ⇒ 2 NH₃
Step 2: Calculate the moles corresponding to 2000 g of NH₃
The molar mass of NH₃ is 17.03 g/mol.
2000 g × 1 mol/17.03 g = 117.4 mol
Step 3: Calculate the moles of N₂ needed to produce 117.4 moles of NH₃
The molar ratio of N₂ to NH₃ is 1:2. The moles of N₂ needed are 1/2 × 117.4 mol = 58.70 mol
Step 4: Calculate the mass corresponding to 58.70 moles of N₂
The molar mass of N₂ is 28.01 g/mol.
58.70 mol × 28.01 g/mol = 1644 g
Which of the two Lewis/electron dot structure representations, which is
the correct one for oxygen gas? PICTURE BELOW
Answer:
A
Explanation:
What is the name for the compound with a chemical formula B6Si.
The chemical formula B₆Si belongs to the compound silicon hexaboride.
What is the empirical formula for a compound if a 2.50g sample contains 0.900g of calcium and 1.60g
of chlorine? (3pts]
Answer:
CaCl₂
Explanation:
First we convert the given masses of elements into moles, using their respective molar masses:
0.900 g Ca ÷ 40 g/mol = 0.0225 mol Ca1.60 g Cl ÷ 35.45 g/mol = 0.045 mol ClNow we divide those numbers of moles by the lowest value among them:
0.0225 mol Ca / 0.0225 mol = 10.045 mol Cl / 0.0225 mol = 2Meaning the empirical formula for the compound is CaCl₂.
What is the pOH for a solution whose pH is 2?
Answer:
12
Explanation:
Because it is pH and pOH, you can use the relationship of 14-pH=pOH, or 14-pOH=pH. Using this you should get the pOH to be 12.
What happens when earth rotates on its axis and how long take?
Answer:
We get Day and Night... It takes 24 hours for the earth to rotate on its axis