1. What is the new volume of a sample of neon if 5.23 L of the gas, which was originally at 214 mmHg, is compressed until the pressure increases to 796 mmHg?
2. When a balloon containing 635 mL of air is taken from sea level (at standard pressure) to a higher altitude, the balloon expands to 829 mL. What is the air pressure at this new altitude (in atm)?
3. A 465 mL sample of gas at 55°C is cooled to standard temperature (0°C). What is its new volume?
4. To what Celsius temperature does 750. mL of gas originally at −12°C need to be heated to bring the volume to 2.10 L?
5. The pressure in a car tire is 217 kPa at 24°C. After being driven on a hot summer day, the pressure in the tire increases to 258 kPa. What is the Celsius temperature of the air in the tire?
6. A gas sample originally at −39°C is heated to standard temperature (0°C), at which point its pressure is measured to be 808 mmHg. What was the original pressure of the gas?
7. A 400. mL sample of gas at 15°C and 113 kPa is heated to 227°C while expanding into a 900. mL container. What is the new pressure of the gas in kPa?
8. 2.50 g of CO2 gas is confined in a rigid cylinder at a pressure of 4.65 atm. If 0.42 g of gas is released from the cylinder, what is the new pressure?
Please help I'm so bad at chemistry

The type of molecule which is shown in the given question is alcohol, due to presence of hydroxyl group.

Funcional groups are those specific groups which after attaching to any compound changes the property of that compound and then that compound will known by the propeties of that functional group.

Given molecule has the molecular structure CH₃-CH₂-OH, means in this molecule hydroxyl group is present which defines the general properties of alcohol.

Hence given molecule is an alcohol.

To know more about functional groups, visit the below link:

https://brainly.com/question/493841

Answer:

4moles of hydrogen atoms

Explanation:

The second conversion factor reflects the number of atoms contained within each molecule. Two water molecules contain 4 hydrogen atoms and 2 oxygen atoms. A mole of water molecules contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms.

Answer:

Explanation:

The three of them increase from left to right across the periods of the periodic table, and at the same time, they decrease from up to down across the groups of the periodic table.

Ionization Energy is defined as the energy required to remove the atom of an electron.

Electron affinity is defined as the change in energy when electron is added to a negative ion.

Electronegativity is the ability of an atom to attract other atoms to itself.

Answer:

nylon 66 is made of two monomers each containing 6 carbon atoms, hexamethylenediamine and adipic acid.

Answer:

25,000 pairs

Explanation:

Explanation:

Acids and alkalis both contain ions. Acids contain lots of hydrogen ions, which have the symbol H+. Alkalis contain lots of hydroxide ions, symbol OH-. Water is neutral because the number of hydrogen ions is equal to the number of hydroxide ions

Answer:

cids and bases both react with water and a lot of acids and bases are soluble in nature. Both acids and bases are electrolytes which means that they're good conductors of electricity. Acids and bases both produce ions in water solution. Acids release hydrogen ions (H+) whereas Bases release hydroxide ions (OH–).

Explanation:

Answer:

reactants

Explanation:

have a good day!

Answer:

4g of the radioactive element present

Explanation:

Radioactive elements are atoms that are unstable in normal conditions and are converted in another different atoms.

1 half life express the time that is need to decay the half of the initial amount of the radioactive element.

If initially we have 8g of the radioactive element, after 1 life we will have 8g/2 =

4g of the radioactive element present

Answer:

parallel circuit

Explanation:

Hope this is right!!

Answer: 1. Synthetic Substance or Synthetic compound 2. Oil 3. Biofuels 4. Salt and Sugar 5. medicine 6. Synthetic 7. Background Knowledge and Visualizing

Explanation: Hope this helps! Good luck!

Answer:

1= synthetic substance

2= natural gas

3= alcohol

4=artificial musks

5= medicine

6= synthetic

7=Questioning the Text

Explanation: If  my answers are correct please mark me as a brainlist.

Answer: The reaction [tex]SiO_{2}(g) + 3C(s) \rightarrow SiC(s) + 2CO(g); \Delta H = +624.7 kJ[/tex] is classified as endothermic: heat is gained by the system.

Explanation:

A process or reaction in which heat is absorbed is called endothermic reaction.

For example, melting of ice is an endothermic process.

For an endothermic reaction the sign of [tex]\Delta H[/tex] is positive which means heat is gained by the system.

Here, the given reaction is as follows.

[tex]SiO_{2}(g) + 3C(s) \rightarrow SiC(s) + 2CO(g); \Delta H = +624.7 kJ[/tex]

A process or reaction in which heat is released is called exothermic reaction.

For example, combustion reaction, freezing of water etc are exothermic process.

For an exothermic reaction the sign [tex]\Delta H[/tex] is negative which means heat is lost by the system.

Thus, we can conclude that the reaction [tex]SiO_{2}(g) + 3C(s) \rightarrow SiC(s) + 2CO(g); \Delta H = +624.7 kJ[/tex] is classified as endothermic: heat is gained by the system.

Answer: The agency requires all prescription drugs containing acetaminophen to carry a black box warning that an overdose can result in liver transplant or death. For over-the-counter Tylenol and its generic equivalents, the FDA requires no warning that overdose can be fatal.

Explanation:

^^^^

Answer:

A. There are more daughter nuclei than parent nuclei in a sample.

Explanation:

There are more daughter nuclei than parent nuclei in a sample. Hence, option A is correct.

The half-life of a radioactive element or isotope is the time taken for half of the substance to decay.

If the half-life of a decaying isotope is 10 years, after 8 years, less than the total mass of the original isotope will decay since 8 years is less than 10 years.

Therefore, we can conclude that, if the half-life of a decaying isotope is 10 years, after 8 years, there will be more parent nuclei than daughter nuclei in a sample.

Learn more about half-life here:

https://brainly.com/question/24710827

#SPJ2

Explanation:

Mass (m)=0.3 kg

height(h)=2.6 m

acceleration due to gravity (g)=10m/s^2

Potential energy= MGH

=0.3×10×2.6

7.8 J

Give brainliest if u can

Answer:

[tex]\boxed {\boxed {\sf 0.5000 \ mol \ NaCl}}[/tex]

Explanation:

We are asked to convert grams to moles. We must use the molar mass or the grams in 1 mole of a substance. These values are found on the Periodic Table as the atomic mass, but the units are grams per mole (g/mol) instead of atomic mass units (amu).

We are given the compound sodium chloride or NaCl. Look up the molar masses of the individual elements.

The formula for the compound does not contain any subscripts, so there is 1 mole of each element in 1 mole of the compound. Add the molar masses together to find sodium chloride's molar mass.

Now we can use the molar mass to create a ratio. We know there are 58.4397693 grams of NaCl in 1 mole of NaCl.

[tex]\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Multiply by the number of grams provided in the problem: 29.22

[tex]29.22 \ g\ NaCl*\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Flip the ratio so the units of grams of NaCl cancel.

[tex]29.22 \ g\ NaCl*\frac { 1 \ mol \ NaCl}{58.4397693 \ g \ NaCl}[/tex]

[tex]29.22*\frac { 1 \ mol \ NaCl}{58.4397693}[/tex]

[tex]\frac {29.22}{58.4397693} \ mol \ NaCl[/tex]

[tex]0.5000019738 \ mol \ NaCl[/tex]

The original measurement of grams has 4 significant figures, so our answer must have the same. For our answer, that is the ten-thousandth place. The 0 to the right of this place (0.5000019738) tells us to leave the 0 in the ten-thousandth place.

[tex]0.5000 \ mol \ NaCl[/tex]

There are approximately 0.5000 moles of sodium chloride in a 29.22 gram sample of sodium chloride.

Explanation:

Entropy also increases when solid reactants form liquid products. Entropy increases when a substance is broken up into multiple parts. The process of dissolving increases entropy because the solute particles become separated from one another when a solution is formed. Entropy increases as temperature increases. S = entropy

k_{b} = Boltzmann constant

\ln = natural logarithm

\Omega = number of microscopic configurations

Answer: OB

Explanation:

The empirical formula of an element is the simplest formula of an element which shows the ratios of atoms of the each element present in a molecule of a compound .

Answer:

they end up bouncing against each other instead of merging together

Explanation:

Answer:

22.4 L

Explanation:

We'll begin by calculating the number of mole in 16.0 g of CH₄. This can be obtained as follow:

Molar mass of CH₄ = 12 + (4×1)

= 12 + 4

= 16 g/mol

Mass of CH₄ = 16 g

Mole of CH₄ =?

Mole = mass / molar mass

Mole of CH₄ = 16 / 16

Mole of CH₄ = 1 mole

Finally, we shall determine the volume of the gas. This can be obtained as follow:

Number of mole of CH₄ (n) = 1 mole

Pressure (P) = 760 mmHg = 1 atm

Temperature (T) = 0°C = 273 K

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V)?

PV = nRT

1 × V = 1 × 0.0821 × 273

V = 22.4 L

Therefore, the volume of the gas is 22.4 L

Answer:

Grinding the magnesium metal into a fine powder. I took the test and got it right.

Answer:

Q = 1455.12 Joules.

Explanation:

Given the following data;

Mass = 300 grams

Initial temperature = 22.3

Final temperature = 59.9°C

Specific heat capacity = 0.129 J/gºC.

To find the quantity of energy;

[tex] Q = mcdt[/tex]

Where,

Q represents the heat capacity.

m represents the mass of an object.

c represents the specific heat capacity of water.

dt represents the change in temperature.

dt represents the change in temperature.

dt = T2 - T1

dt = 59.9 - 22.3

dt = 37.6°C

Substituting the values into the equation, we have;

[tex] Q = 300*0.129*37.6 [/tex]

Q = 1455.12 Joules.

Answer:

When H2O acts as a base, it gains one H, which forms its conjugate acid, H30. ... Write the formula for the conjugate base for each of the following acids: a. ... H3PO4(aq) + H2O(l) 7 H2PO4 (aq) + H3O+(aq) ... CO32-(aq) + H2O(1) 2 HCO3 (aq) + OH(aq) ... balanced equation for the reaction of the ammonium ion with water.