1-¿Que tipo de energía usa en su hogar para el alumbrado , la calefacción y artículos de entretenían, entre otros ? 2-¿ de que manera en su hogar o escuela tienen acceso a la energía eléctrica? 3- aparte de los componentes ¿ hay alguna diferencia en el funcionamiento de circuito eléctrico de una linterna y el de una casa ? 4-¿que ocurriría si el voltaje que proporciona la fuente de energía es menor que la requerida por la ampolleta ? ¿Y su es mayor? 5-es indispensable el interruptor para el funcionamiento del circuito eléctrico

Answers

Answer 1

Answer:

Explanation:

1.-Energía eléctrica ( electricidad ) proveniente de una fuente AC ( es decir de corriente alterna)

2.-Hay un proveedor de servicios que lleva la energía a las comunidades en general y en particular la lleva hasta mi casa y escuela. Se define como acometida eléctrica, la infraestructura que lleva la energía desde la red de distribución al tablero principal en el abonado. La acometida puede ser aérea o subterránea, y normalmente consta de tres conductores ( de los cuales dos son calibre AWG # 8 ( dos fases ) y uno AWG # 10 ( neutro ). Esta configuración permite tener: 120 y 240 (V) en servicio en la casa y suficiente capacidad para la carga eléctrica de una casa normal

3.-Si, el tipo de corriente. En el caso de una linterna se usan "pilas" o baterías de corriente directa ( que no varia en el tiempo), en la casa la corriente es alterna de 60 ciclos por segundo de frecuencia.

4.-Si el voltaje es menor en una medida importante la ampolleta no alumbra por cuanto si por ejemplo el voltaje nominal ( o de funcionamiento es 120 V y el voltaje suministrado es 50 V ese voltaje será insuficiente para hacer funcionar el circuito). Si el voltaje es mayor dígamos 240 V la ampolleta se quema.

5.-El interruptor nos asegura la maniobra a nuestra voluntad del circuito del cual forma parte. Es decir si tengo un circuito de alumbrado ( 1 bombillo y un interruptor ) ese interruptor me permitirá apagar y encender la luz cuando yo quiera.

Los breaker son "interruptores" son dispositivos de protección para caso de sobrecargas y/o cortocircuitos


Related Questions

while exploring an ancient mayan tomb, you discover that the walls begin to move and are closing in on you. by exerting 400 n of force, you are able to keep a wall from coming closer. the work you are doing on the wall is

Answers

Because the wall is not moving, the work you are performing on it is coming closer by exerting 400 n of force.

What work has been done to the wall?

Despite the man's forceful efforts, the wall does not budge. Work completed equals force applied times displacement, and since the wall's displacement is 0, work completed is also zero.

Is work completed when a wall is pushed?

When an object experiences force and is moved from its starting location, this is referred to as doing work. The Joule is the SI unit of work. A joule is defined as a newton of force applied to an object that results in a displacement of one meter. This signifies that when force is exerted to a wall, nothing is accomplished.

To know more about Work done visit:-

https://brainly.com/question/13662169

#SPJ4

What is the formula of cutoff wavelength?

Answers

The cutoff wavelength calculation formula is  λ = c/f.

The cutoff wavelength is what?

The cutoff wavelength is the lowest wavelength at which light may cause electrons on a metal plate to become free.

The shortest wavelength of light that will not cause electrons to be emitted from a metal surface is the cut-off wavelength, sometimes referred to as the threshold wavelength. If no electrons are released, the light's wavelength must be below the threshold wavelength.

The wavelength at which the power level of the Higher Order Modes has decreased by 19.3 dB in comparison to the level of the Fundamental Mode is known as the Cut-off Wavelength (strictly speaking this is true only for the Second Order Mode).

The formula to calculate cutoff wavelength is λ = c/f

where λ is the wavelength of light

c = speed of light

f = frequency of light

To learn more about cut-ff wavelength from given link

brainly.com/question/27986610

#SPJ4

Which of the following is the minimum amount of work done by a hydraulic lift to raise a 150-kg aluminum block 2.0 m vertically?
a. 300 J
b. 2940 J
c. 1470 J
d. 75 J

Answers

d. 75 J. Have a nice day.

Important Formulas:

[tex]w=Fd[/tex]

[tex]F=ma[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)

__________________________________________________________

Given:

[tex]m=150kg[/tex]

[tex]d=2m[/tex]

[tex]a=9.8m/s^2[/tex] (acceleration due to gravity)

[tex]w=?[/tex]

__________________________________________________________

Finding force:

[tex]F=ma[/tex]

[tex]F=150\times9.8[/tex]

[tex]F=1470N[/tex]

__________________________________________________________

Finding work:

[tex]w=Fd[/tex]

[tex]w=1470\times2[/tex]

[tex]w=2940J[/tex]

__________________________________________________________

[tex]\fbox{Option B}[/tex]

A 18.3 kg rock, m, is on the edge of a 105.4 m cliff, h, as shown in the picture. Assume that air resistance is negligible. The rock falls from the cliff. What is its kinetic energy just before it strikes the ground?

Answers

18902.4 J kinetic energy just before it strikes the ground.

What is kinetic energy?

The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

Given that,

mass (m) = 18.3 kg

height (h) = 105.4 m

Thus, Potential energy (P.E) = mgh

or, P.E = (18.3) ×(9.8) ×(105.4)

or, P.E = 18902.4 J

Kinetic energy (K.E) = Potential energy (P.E)

or, Kinetic energy (K.E) = 18902.4 J

Thus, 18902.4 J kinetic energy needed just before it strikes the ground.

To know more about kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ1

Help me out please thank you

Answers

Answer:

Similarly, the law of conservation of energy states that the amount of energy is neither created nor destroyed. For example, when you roll a toy car down a ramp and it hits a wall, the energy is transferred from kinetic energy to potential energy.

Explanation: To be more clear, your answer would be A

1a. state the condition for the equilibrum of a rigid body acted upon by parallel forces
1bi. Describe an experiment using the principles of moments to determine the mass of a meter rule
1bii. State two precautions necessary to ensure accurate results
c. what is a couple in physics​

Answers

The response to the questions are given below:

1a. The condition for the equilibrium of a rigid body acted upon by parallel forces is that the vector sum of all the forces acting on the body must be equal to zero, and the vector sum of all the torques (moments) acting on the body must also be equal to zero.

1bi. An experiment to determine the mass of a meter rule using the principles of moments could involve suspending the meter rule from a pivot point using a string or wire, and then applying known weights to the ends of the meter rule.

1bii. Two precautions that should be taken to ensure accurate results in this experiment would be to ensure that the pivot point is perfectly level and that the weights applied to the ends of the meter rule are applied at exactly the same distance from the pivot point.

C. A couple in physics is a pair of forces that act on a body in such a way that they produce a turning effect, or torque, about a fixed point. A couple consists of two equal and opposite forces that are applied to the body at different points.

What is equilibrium of a rigid body?

When a rigid body's linear momentum or rotational momentum are not changing at any given time, it is said to be in mechanical equilibrium. The body is in a state of mechanical equilibrium when there is no linear or angular acceleration.

When a rigid body's linear and angular acceleration are both zero with respect to an inertial frame of reference, we say that it is in equilibrium. A body in equilibrium can therefore move, but in that case, its linear and angular velocities must remain constant.

Therefore, In essence, there should not be any acceleration for an object to be in equilibrium (linear or angular). Therefore, the item must have zero net force and zero net torque.

Learn more about equilibrium  from

https://brainly.com/question/517289

#SPJ1

Paula is sailing across a lake. As the boat accelerates, she thinks about how
the wind is pushing on the sail. Which statement below best represents
what is happening between the sail and the air?

A. The sail is pushing the wind back and slowing down the air.
B. The sail and air are not pushing each other, they are just moving together.
C. The air is pushing on the sail, but the sail is not pushing the air.
D. The sail is pushing the wind forward with the air.

Which statement do you most agree with? Explain you reasoning.

Answers

A is the correct answer because the boat can’t sailor without a sailor that the boat

The answer is (A.) The sail is pushing the wind back and slowing down the air. The wind is pushing the sail and the sail pushes the wind back and slows the air down.

As the boat is sailing, the wind will be faster than the boat. This fast wind is obstructed by the sail. That is, the fast wind gets slowed down by the sail because the sail pushes the wind backwards which slows down the wind. This will make the wind push the boat forward thereby accelerating the boat.

Learn more about the forces acting on a boat here:

https://brainly.com/question/21186114

Discuss the importance of understanding both mechanical and electromagnetic waves by giving examples, such as designing comfortable and safe structures and technologies.

Answers

This procedure enables life as we know it. And electromagnetic waves influence modern life in countless smaller-scale (but more immediate) ways. For example, electromagnetic waves are responsible for your cell phone, Wi-Fi connection, microwave, and medical imaging methods like x-ray and MRI.

What understanding mechanical and electromagnetic wave?

Energy is moved around the planet in two main ways: mechanical waves and electromagnetic waves. Mechanical waves include air and water waves caused by sound.

Therefore, Ocean waves are crucial for climate modelling, weather forecasting, coastal towns, shipping lanes, and offshore business.

Learn more about waves here:

https://brainly.com/question/3101711

#SPJ1

What is the formula of this energy frequency relations?

Answers

E = hv is the energy equation. In the formula, E stands for energy, h for Planck's constant (6.626 x 10 -34 J s), and v for frequency. Since frequency rises as energy falls, frequency and energy are related directly in the energy equation.

The frequency of the radiation directly affects how much energy each quantum contains. The amount of energy carried is inversely proportional to wavelength since frequency and wavelength have an inverse relationship.

The equation E=hv, where h is Planck's constant, describes the relationship between a photon's energy E and frequency v.

In essence, energy is inversely proportional to wavelength but directly proportional to radiation frequency. Accordingly, energy rises with a rise in frequency or a fall in wavelength, and falls with a fall in frequency or a rise in wavelength.

To learn more about energy frequency relation from given link

https://brainly.com/question/13396102

#SPJ4

Predict what happens to the mechanical advantage of a machine if friction is reduced through the use of oil or some other means.

Answers

A big machine is composed of several moving and stationary parts. Some of these parts are in a state of constant motion hence they periodically rub against each other.

Explain about mechanical advantage:The Mechanical Advantage (MA) of a machine is the ratio between the output force produced by the machine divided by the input force exerted on it:The MA is generally a number larger than 1, since machines are used to "multiply" the force applied.There are actually 2 values of the mechanical advantage for a machine:The Ideal Mechanical Advantage (IMA), which is the MA when there are no frictional force acting on the machine, and so when all the work done in input is transferred as energy in output The Actual Mechanical Advantage (AMA), which is the MA when taking into account the frictional forces, which cause a dissipation of part of the energy; so, not all the work done in input is transferred as energy in outputThe efficiency of a machine is defined as the ratio between the two:A machine cannot have an efficiency of 100% because there are always some frictional/resistive forces acting on the system, so part of the energy in input is always dissipated, and therefore AMA < IMA, and so the efficiency is not 100%.As we know that friction force is the resistive force due to relative motion of two surface. When one surface is moving relative to other surface then the motion is resisted by the interaction force between two surface which is known as friction force.

To learn more about mechanical advantage refer to:

https://brainly.com/question/25984831

#SPJ1

I need help getting the answer for this!

Answers

The shuttlecock began 7 meters above the ground, and fell through a vacuum. The equation a = v/t shows acceleration (a), which is the change in velocity (v) over the change in time (t).

What is the formula for a graph of velocity and time?

time chart A velocity vs. time graph can be used to determine position and to calculate velocity. We are aware that v = d/t. Rearranging the equation with a little mathematics reveals that d = v t.

What is the acceleration time graph's formula?

△a = △v/△t, For an item travelling at a constant rate of acceleration, the rate of acceleration remains constant over all time intervals. As a result, the acceleration-time graph has a slope of zero and is parallel to the time axis.

Learn more about velocity here;

https://brainly.com/question/18084516

#SPJ1

What is the stopping potential when metal with work of 0.6 eV is illuminated with the light of 2.6 VB 3.6 VC 0.8 VD 1.4 V?

Answers

Correct option is D, the stopping potential when metal with work of 0.6 eV is illuminated with the light of 2.6 ev is 1.4 V

The minimal negative voltage that must be provided to the anode to halt the photocurrent is known as stopping potential. When expressed in electron volts, the maximal kinetic energy of the electrons is equal to the stopping voltage. The stopping potential (V0) for the specified frequency of incident radiation in an experimental setup for the photoelectric effect is the value of the negative potential of the collector plate or anode at which the photoelectric current will fall to zero.

Given: E = 2 eV and 0 = 0.6 eV

To locate Potential for stopping (Vo) Formula: Vo = (E - Φ₀)/ e

Calculation:

Vo= 2 × 1.6 × 10^-19 – 0.6 × 1.6 × 10^-1 / 1.6 × 10-19

= 2 -0.6

= 1.4 V

1.4 V is the stopping potential.

To learn more about stopping potential from given link

https://brainly.com/question/13839503

#SPJ4

Atoms that have a positive charge will be attracted to atoms with a
charge. *
O Positive
O Negative
O Neutral

Answers

Answer:

negative

Explanation:

positive charges attract negative charges and vice versa. and are possible to nullify

How does sonar detect underwater objects?

Answers

An acoustic signal or sound pulse is sent into the water by active sonar transducers. The sound pulse will bounce off an item if one is in the way of the sound pulse, sending a "echo" back to the sonar transducer.

Does sonar function submerged?

SONAR is most useful underwater, although it also functions in the open air. The reason for this is that sound travels farther in water.

How does underwater sonar work to find submarines?

Sonar devices use sound waves to penetrate the ocean and record the sound waves that are reflected back to display items below the surface. This is known as active sonar, which is a type of echolocation similar to that employed by bats. Similar technology exists in radar, but radio waves are used in it.

To know more about sonar visit :-

https://brainly.com/question/4955683

#SPJ4

if equal numbers of suspension clamps are on each side of the support, can their weights be omitted from the calculations? explain

Answers

Yes, the weight of the suspension clamps is omitted from the calculation as long as each side of the support is the same.

Suspension clamps are mainly used for overhead power lines or substations. It can hang wire, lightning protection wire on insulator string, or lightning protection cable on the tower by connecting fittings. Suspension clamps are mainly made of malleable iron and aluminum alloy.

Given the same number of clamps on both sides of the support, when we calculate the torque, the weight of the clamps will disappear from each side.

Like there are 2 clamps on each side so the torque due to the clamps are going to be

                  τ = r x F = 2 * W * d - 2 * W * d          

So that the weight of the clamps can be omitted as in the final calculation of the torque as each clamp will cancel out. Provided that the position of the clamps on both sides of the support is the same (i.e., distance d from the support)

Learn more about the suspension clamps at https://brainly.com/question/17156840

#SPJ4

what is the velocity of a car that went a distance of 400ft in 25 seconds ​

Answers

Speed = (distance covered) / (time to cover the distance)

Speed = (400 ft) / (25 seconds)

Speed = 16 ft/sec

That's the car's speed.

We don't have enough information to state its velocity.

A gas dissolves in a liquid most rapidly when under _______ pressure.
High

Answers

A gas dissolves in a liquid most rapidly when under High pressure.

An example of a high pressure boiler is one that produces energy in thermal power plants that runs at 80 bars or more. They produce electricity by turning water into steam through thermal energy using water-filled tubes in a metal tank or enclosure, which is then utilized to power machinery. There is a higher likelihood of leaks occurring in the system if the boiler pressure is too high. The system won't function as well if the boiler pressure is too low, though. For your system to effectively heat your home, it is crucial to maintain the proper boiler pressure.

Learn more about  High pressure here:

https://brainly.com/question/12473337

#SPJ4

If a species experiences a helpful mutation, like camouflage, explain how that mutation would help the species to better I survive and flourish. Again, be sure to explain how and why that mutation would be helpful.



HELP I NEED IT FAST PLEASE ILL MARK B!!!! IF CORRECT

Answers

A given environment are called adaptations. Adaptations are traits that an organism inherits from its parents. Within organisms are genes coding for a certain number of traits. Example: a human population may have genes for eyes that are green, brown, hazel or colour, but as far as we know, not purple or lime green or any other.

which of the following leaves will be the easiest to make a mat?

Answers

Answer:

c

Explanation:

Which of jupiter's moons experiences the greatest gravitational force of attraction to jupiter?.

Answers

The moon that experiences the greatest gravitational force of attraction from Jupiter is Io, which is the innermost of Jupiter's four largest moons (also known as the Galilean moons).

Io is the most massive of the Galilean moons, and it is also the closest to Jupiter, which means that it experiences the strongest gravitational force of attraction from the planet. In fact, the strong gravitational pull of Jupiter on Io is so great that it causes Io to experience significant tidal forces, which have caused its surface to become heavily fractured and geologically active.

It's worth noting that while Io experiences the strongest gravitational force of attraction from Jupiter, the other Galilean moons (Europa, Ganymede, and Callisto) also experience significant gravitational forces due to their large masses and close proximity to Jupiter.

To know more about Gravity

https://brainly.com/question/14874038

#SPJ4

Answer:the answer is A, lo

Explanation:

A ball on a string is swung in a horizontal circle at a constant speed of 4.3m/s. The centripetal acceleration of the ball is 24.7 m/s^2. The mass of the ball is 3.2kg.

What is the length of the string?

Please show all work thank you so much!

Answers

The length of the string is 75 cm.

What is centripetal acceleration?

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Given that:  The centripetal acceleration of the ball is: a = 24.7 m/s^2.

constant speed of the ball is: v = 4.3m/s.

Let  the length of the string is l.

We know that:   The centripetal acceleration: a = v^2/l

l = v^2/a

= (4.3)^2/24.7

= 0.75 m.

Hence,  the length of the string is 0.75 m or 75 cm.

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ1

What i the velocity of the ice kater after
throwing the nowball? Diregard the friction
between the kate and the ice

Answers

Kinetic Friction, or Sliding Friction, is the friction between skates and ice. When two items slide past each other, this form of friction develops.

Sliding Friction is created when the skate blade passes through the ice. The beautiful curves are governed by the second law. Acceleration is required for a change in velocity, which includes both speed and direction. Because of the constantly changing direction, traveling in a circle at a constant speed includes acceleration. Because everyone is initially at rest, the system's linear momentum is zero. Because there is no external force acting on the system when the guy throws the ball, linear momentum must be conserved.

Learn more about velocity here-

https://brainly.com/question/18084516

#SPJ4

In which stage of the star, does nuclear fusion reaction begin?

Answers

Nuclear fusion reactions begin in the main sequence stage of a star's life.

During the main sequence stage, a star is in hydrostatic equilibrium, meaning that the outward pressure of the hot, dense gas at its core is balanced by the inward gravitational force. This balance allows the star to maintain a stable size and luminosity.

At the core of a main sequence star, the temperature and pressure are high enough to initiate nuclear fusion reactions, in which hydrogen nuclei combine to form heavier helium nuclei. These reactions release a large amount of energy in the form of light and heat, which helps to maintain the high temperature and pressure at the core and keep the star in hydrostatic equilibrium.

Learn more about Nuclear Fusion here:

https://brainly.com/question/17870368

#SPJ4

Which produces more electricity wind or solar?

Answers

In comparison to solar panels, which are just 18% to 22% efficient, wind turbines typically capture 60% of the energy that travels through them. It follows that it is undisputed that a single house wind turbine can generate more electricity than a number of solar panels.

Tell me about solar energy?

Through photovoltaic (PV) panels or mirrors that concentrate solar radiation, solar technologies turn sunlight into electrical energy. Batteries or thermal storage devices can be used to store this energy or to generate power.

What are the principles behind a solar panel's operation?

On the top of a solar panel, a thin layer of silicon is hit by photons, or light particles, which dislodge electrons from silicon atoms. The wiring in solar panels is able to capture the electric current that this PV charge generates.

To know more about electricity wind or solar visit :-

https://brainly.com/question/889163

#SPJ4

30 POINTS PLS HELP

The picture attached has the question

Answers

Answer: cold or hot

Explanation:

Koby placed ½ teaspoon of baking soda into each of two identical glasses. He noticed the baking soda was lumpy, so he used a fork to break up the lumps. Why is it important to break up the lumps?

Answers

Answer:

because the lumps are just baking soda covered with whatever watery substance you used.

Explanation:

so pretty much inside the lumps is just a bunch of baking soda

Messi shoots a shot on goal with a speed of 200m/s.

A. What is its kinetic energy if the ball has a mass of 0.7kg?

B. How does its kinetic energy change if the speed is 180m/s

Answers

The kinetic energy of the ball when it has a mass of 0.7 kg is 14000J.

When the speed is 180 m/s its K.E. changes to 11340 J.

Calculate the kinetic energy of the following options?

A. Kinetic energy E = 1/2 [tex]mv^{2}[/tex]

mass (m) = 0.7 kg

speed (v) = 200 m/s

K.E = 1/2 (0.7) (200)^2

K.E = 1/2 (28000)

K.E = 14,000J

K.E = 14 x 10^3 J

The kinetic energy of the ball has a mass of 0.7 kg is 14 x [tex]10^{3}[/tex] J

B. The kinetic energy is directly proportional to the square of the speed or velocity. When the speed increases its kinetic energy also increases. When the speed decreases also its kinetic energy is decreases.

K.E. = 1/2 [tex]mv^{2}[/tex]

K.E. = 1/2 (0.7) (180)^2

K.E. = 11,340 J

So, the speed of the kinetic energy is decreased, the value of K.E. is also decreased.

To learn more about kinetic energy refer to:

https://brainly.com/question/25959744

#SPJ1

Why do we calculate frequency?

Answers

Frequency gives the number of unique purchases and monetary calculates the amount of money spent.

Frequency, in physics, is the number of waves that pass fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion.

What is frequency?

The definition of frequency says that it is the number of complete cycles of a wave passing through a point per unit time.The SI unit of the frequency is Hertz (Hz).Frequency of a sine wave as the number of complete oscillations made by any wave element per unit time.A frequency is in periodic motion, it has gone through one cycle after passing through a series of events or positions and returning to its original state.

To know more about frequency, click the link given below:

https://brainly.com/question/30053506

#SPJ4

Objects which stay at one place under water, neither sinking or floating, are said to have what kind of buoyancy? Neutral, negative, or positive

Answers

Answer:

Neutral

Explanation:

The buoyant force balances the force of gravity when the average density of an object is equal to the density of the fluid in which it is immersed, resulting in the object sinking (if its density is greater than the density of the fluid) or rising (if it is less). Neutral buoyancy occurs when the average density of an object equals the density of the fluid in which it is immersed. There is no sinking or rising for an object with neutral buoyancy.

Explain why running up a flight of stairs is so much different than walking if both require the same amount of work?

Answers

Answer:

Running up a flight of stairs is different than walking because it requires a different type of muscle activity. When walking, the muscles in your legs move in a more controlled and rhythmic manner, allowing you to maintain a steady pace and avoid stumbling. In contrast, running up stairs requires your muscles to work in a more explosive and powerful manner, generating bursts of force to push you upward and forward. This type of muscle activity is much more intense and demanding, and it requires more energy and effort than walking.

Additionally, running up stairs also requires you to overcome the force of gravity to a greater extent than walking. When you walk up stairs, you are able to use the stairs to support your weight and to assist you in moving upward. When running, however, you are moving too quickly to use the stairs in this way, and you must rely on your own muscle power to lift your body upward. This additional force of gravity makes running up stairs more challenging and demanding than walking.

Other Questions
only some of the people on the daytime side of earth can witness a solar eclipse when it occurs, whereas all the people on the nighttime side of earth can witness a lunar eclipse when it occurs. why is this so? machinery for an assembly line has a cost basis of $150,000 and an expected salvage of $25,000. it is not subject to special limitations for bonus depreciation. how much bonus depreciation was, is, or will be allowed (a) in 2014? (b) in 2018? (c) in 2014? (d) in 2016? When stars are moving away from a telescope, what shade do they appear to be compared to the normal light they emit? 1. Cellular respiration is a series of chemical reactions that convert the energy in food molecules into energy stored in the molecule _________. Aerobic respiration requires the presence of Oxygen___________ and releases water and _________________ as waste products. Why did Harlan dissent in Plessy v. Ferguson? Read the following excerpt and then complete the writing exercise.Based on your book selection and outside research, describe and analyze a current human rights issue. You will illustrate how this real-life issue affects people within the United States and one other country.In complete sentences, paraphrase the above prompt. What is multicultural diversity? What five 5 factors must a compliance plan include? What is the tone of this excerpt from Truth's Ain't IA woman? Why did Quincy Adams fail? A guidance counselor wants to determine if there is a relationship between a students number of absences, x, and their grade point average (gpa), y. the given data list the number of absences and gpas for 15 randomly selected students. using technology, what is the value of r2? a. 0.56 b. 0.32c. 0. 32 d. 0.56 Estimate y when x = 8 from the best fitted straight line y = 13.06 + 0.6x. the ratio of boys to girls in the 6th grade is 2:3 if there are 75 students, how many more girls are there than boys?Show your work. 3. According to John Whitney Hall, what were the three roles Buddhism played in Japan? Why was that a turning point in Japanese culture/society?Type your answer here (4 sentence minimum) What is the author's purpose in Enrique's Journey? which two animals seem to disagree about everything the five and dime store has a cost of equity of 14.8% on equity, a pre-tax interest rate of 6.7% on debt, and a tax rate of 34%. what is the firm's weighted average cost of capital if the debt-equity ratio is 0.46? How do you welcome a baby to the world? Which of the following statements about sexual harassment is true? Multiple Choice The organization cannot be sued for sexual harassment as long as its managers did not know about the situation. Uninvited hugging or patting someone is not considered sexual harassment. A hostile work environment is characterized by a tangible economic harm. A person who feels he or she must acquiesce to a sexual proposition to keep his or her job is facing quid pro quo harassment. Replace the long form of the verb with the hort form. 1. I wa not riding a hore at thi time lat Sunday. 2. You (TUI) were not cycling at 5 pm yeterday. 3. He wa not norkelling at 8 am thi morning. 4. She wa not water-kiing at 11 am yeterday. 5. It wa not wimming here at thi time a week ago. 6. We were not fihing at 4 am thi morning. 7. You (Tu) were not urfing at 2 pm. 8. They were not ailing at thi time a month ago