Answer:
5.59
Explanation:
50 meters in 10 seconds is 11.18, which is an easy way to remember. Just divided by 2
Margie used arrows to represent the gases that enter and leave a plant during the process of photosynthesis, as shown below. PLEASE HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPpppppp
Answer:
D. Arrow 1 is carbon dioxide and arrow 2 is oxygen.
Explanation:
Hurry!!!! Through which substance would sound travel the fastest? A:steel B:Water C:Air
D:Coffee
Sound travels the fastest through steel. So, option (A) is correct,
What are the effects of medium in speeds of sound ?Depending on the medium that it is moving through, sound has a wide range of speeds. The stiffness of the medium (or compressibility in the case of gases) and its density work together to define the speed of sound in that medium. The speed of sound increases with the rigidity (or lack of compressibility) of the medium. The speed of sound decreases with increasing medium density.
Due to air's ability to be compressed, the speed of sound in air is low. The speed of sound is often higher in liquids and solids than in gases because they are more rigid and difficult to compress than gases. Given that temperature impacts density, the speed of sound is somewhat correlated with the temperature of the material it is travelling through, particularly for gases.
Learn more about sound here:
https://brainly.com/question/14595927
#SPJ5
What force would be needed to increase a 450 kg object's velocity from 15 m/s to 75 m/s in 1 minute?
Answer:
450N
Explanation:
Given parameters:
Mass of object = 450kg
Initial velocity = 15m/s
Final velocity = 75m/s
Time = 1min = 60s
Unknown:
Force applied = ?
Solution:
To solve this problem, from Newton's second law of motion, we know that;
Force = mass x acceleration
Acceleration = [tex]\frac{v - u }{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now;
Force = mass x [tex]\frac{v - u }{t}[/tex]
Force = 450 x [tex]\frac{75 - 15}{60}[/tex] = 450N
A minibus drives with a constant speed of 76 miles per hour. How can I travel in 4 hours?
Answer:
Answer:
304
Explanation:Answer:
A sample of O2 occupies 75 L at 1 atm. If the volume of the
sample doubles, what is the new pressure of O2?
atm
Answer:
1/2 atm
Explanation:
Givens
The temperature remains constant so the formula is
P = 1 atm
V = 75 L
P1 = ?
V1 = 75 * 2 = 150 L
Formula
P*V = P1* V1
Solution
1 * 75 = P1 * 150 Divide by 150
75/150 = P1
P1 = 1/2 atmospheres
Which of these is an example of electrical energy being converted to mechanical energy?
Sunlight used by plants in photosynthesis
Ceiling fan
Lightning striking the ground
Flashlight
Answer:
Ceiling fan
Explanation:
Ceiling fan is a perfect and typical example of electrical energy being converted to mechanical energy.
In most systems, energy is usually transformed from one form to another. Energy is not created neither is it destroyed. We know this by virtue of law of conservation of energy.
The ceiling fan is powered by electrical energy from an outlet.The energy from the outlet is used to drive the blades of the fan and set them into motion. This is mechanical energy.- Two rocks with a mass of 5 kilograms and 10 kilograms, respectively, fall freely from rest near
the Earth's surface. After 3 seconds of free-fall, compared to the 5-kg rock, the 10-kg rock has
greater...
a. acceleration
b. momentum
C. height
d. velocity
e displacement
Help me in this please help me!
Answer:
1. A
2. C
3. A
4. B
Explanation:
A conductor allows electric current to pass through it. Hence, when conductors are connected in a closed circuit, current flows.
All the resistors in Q2 are connected in series. In a series connection, the current across all the resistors is the same.
In a battery, chemical energy is converted to electrical energy by chemical reactions.
When a new resistor is connected in parallel to a circuit the current increases accordingly.
All of these are likely to speed up the rate of a reaction except decreasing the surface area. increasing the temperature. increasing the pressure. adding a catalyst.
Answer:
decreasing the surface area.
Explanation:
The rate of reaction or the reaction rate may be defined as the speed or the rate at which the reaction occurs. It is the speed of formation of the products from the reactants. The following factors increases the rate of reaction :
1. by adding a catalyst
2. by increasing the temperature
3. by increasing the pressure
4. by increasing the surface area
5. by increasing concentration
Hence, decreasing the surface area of the reaction reduces the rate of reaction.
How does a salt differ from an acid or base?
Answer:
An acid is defined as a substance whose water solution tastes sour, turns blue litmus red and neutralizes bases. A substance is called base if its aqueous solution tastes bitter, turns red litmus blue or neutralizes acids. Salt is a neutral substance whose aqueous solution does not affect litmus
A 1.0 kg ball has a potential energy of 10 J and falls to the ground. What is the velocity right before it hits the ground?
a)20 m/s
b)10 m/s
c)4.5 m/s
d)15 m/s
Answer:
10m/s
Explanation:
When a tuning fork with a frequency of 440.0 Hz is used with a resonator, the loudest sound produced occurs when the length of the closed-pipe tube is 10.50 cm long. What is the speed of sound in this case?
Answer:
4620
Explanation:
440.0+10.50
=4620
Which statement is true about compounds?
A: They do not form living things.
B: They do not form non-living things.
C: They are when electrons of different atoms combine.
D: They are when atoms of different elements combine.
Answer:
Its D
Merry Christmas!!!!
Explanation:
Also I got this question right I had it for an assignment
Brad is riding his bicycle on a straight stretch of road. When he passes a
traffic light, he begins timing himself. In 29.9 seconds, he cycles 220 meters.
His rate of acceleration during this stretch was 0.14 m/s2. Given this
information, what was Brad's initial velocity when he started timing himself?
Assume all motion is in the positive direction.
A) 2.9 m/s
B) 5.3 m/s
C) 0 m/s
D) 7.8 m/s
Answer:
d
Explanation:
Answer:
5.3 m/s
Explanation:
HELP PLZ !!!
This graph relationship shows the dependent variable increasing at a greater rate than the independent variable.
A. Quadratic
B.Inverse
C. Linear/direct
D. No Relationship
Answer:
probly c or b
Explanation: experinse
What is the mass of a rock that is accelerated to 1.4m/s^2 with a force of 350 N
F=m*a
350N=m*1.4m/s^2
m=350N/1.4m/s^2=250kg
A substance will take on the shape of an open container if it is a
liquid.
plasma.
gas.
solid.
Answer:
liquid
Explanation:
Plzzzz helpppppppo Near the end of the life cycle of a star why does the star lose its size
Answer:
Because the energy is waning
Explanation: hope this helps
If a car is accelerating downhill under a net force 3674 N , what additional force would cause the car to have a constant velocity
Answer:
For the car to move with constant velocity the additional force required is [tex]F__{dg} }= -3674 \ N[/tex]
Explanation:
From the question we are told that
The net force of the car is [tex]F_{net} = 3674 \ N[/tex]
Generally the total force acting on the car is the net force plus the force due to gravity acting in direction of the car (Let denote it as [tex]F__{dg}[/tex])
So the total force acting on the car is mathematically represented as
[tex]F_{net} + F__{dg}} = F[/tex]
Here this F representing the total force can be mathematically represented as
[tex]F = ma[/tex]
Now for constant velocity to be attained, the acceleration of the car will be zero
So at constant velocity
[tex]F = m * 0[/tex]
=> [tex]F = 0 \ N[/tex]
So
[tex]F_{net} + F__{dg}} = 0[/tex]
=> [tex]F__{dg} }= -F_{net}[/tex]
=> [tex]F__{dg} }= -3674 \ N[/tex]
Charles, the 75 kg trampoline artist, lands on a trampoline with a speed of 9.0 m/s.
If the trampoline behaves like a spring with a spring constant of 52,000 N/m, what maximum distance will Charles push down the trampoline before bouncing back up? (Hint: at maximum compression, Charles is not moving.)
Answer:
The maximum distance Charles will push down the trampoline ≈ 0.342 m
Explanation:
The given parameters are;
The mass of the trampoline artist, m = 75 kg
The speed with which the trampoline artist lands, v = 9.0 m/s
The value of the spring constant of the trampoline, k = 52,000 N/m
Let x represents the maximum distance Charles will push down the trampoline
Therefore, we have;
Kinetic energy = 1/2·m·v²
The kinetic energy with which the trampoline artist lands = 1/2 × 75 × 9.0² = 3037.5
The kinetic energy with which the trampoline artist lands = 3037.5 J
The potential energy stored in a spring = 1/2·k·x² = The kinetic energy with which the trampoline artist lands
∴ 1/2 × 52,000 × x² = 3037.5
∴ x = √(3037.5/(1/2 × 52,000)) ≈ 0.342
The maximum distance Charles will push down the trampoline = x ≈ 0.342 m
Which stable element is used to determine the age of volcanic rock?
argon
carbon-14
potassium
carbon-12
Answer:
The answer is A
Explanation:
Argon is the stable element that is used to determine the age of volcanic rock as it is found inside of it.
I dont know if the top is correct but the answer is because i just took the test.
The age of volcanic rock is determined by argon-40 by radiometric dating. Hence option A is correct.
What is radiometric dating?Using radioactive isotopes found within an object, radiometric dating may determine how ancient something is, such as a fossil, rock, or piece of wood. By analyzing the ratio of radioactive argon to radioactive potassium within a rock, we can use the potassium-argon dating technique to determine the age of the rock or when it was formed.
The fundamental idea behind radiometric dating is that by comparing an isotope's presence in a sample to its abundance on Earth and its known half-life (rate of decay), you may determine the sample's age. Because many radioactive materials degrade more slowly than others, radiometric dating is useful for determining the age of ancient objects.
Argon-40 is used to determine the age of volcanic rock. Therefore, option A is correct.
Learn more about radiometric dating, here:
https://brainly.com/question/14799339
#SPJ6
A 90 kg body is taken to a planet where the acceleration due to
gravity is 2.5 times that of the earth. What is the weight of this body
on the surface of this planet? Take g = 10 m/s?.
Answer:
2250N
Explanation:
W= mg,
where W= weight
m= mass
g= acceleration due to gravity
Given that the body is 90kg, m= 90kg.
Acceleration due to gravity of planet
= 2.5(10)
= 25 m/s²
Weight of body on planet
= 90(25)
= 2250N
*Mass is the amount of matter an object has and is constant (same on earth and the planet).
Answer:
Here
mass=90kg
time=2.5second
acceleration due to gravity=10m/s
now,,,
Force=???
Force=mass*acceleration
Force=90*10
Force=900N
HIII DROPPING COINS YALL
Answer:
tysm
Explanation:
Answer:
OMG THANK U SO MUCH I NEEDED THEMMMMM
Jack jumped off a diving board and hit the water at 15.68 m/s downward. How long was he falling for before he hit the water?
Answer:
1.6 s
Explanation:
From the question given above, the following data were:
Velocity (v) = 15.68 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
Thus, we can calculate the time taken for Jack to hit the water by using the following formula:
v = gt
15.68 = 9.8 × t
Divide both side by 9.8
t = 15.68 / 9.8
t = 1.6 s
Therefore, it took Jack 1.6 s to hit the water.
Which of these is an appropriate treatment for a deep, bleeding wound?
A. Walk the person around.
B. Remove any embedded object.
C. Elevate the wound.
D. Apply a tourniquet.
Answer:
Elevate the wound.
Hope this helped!
Los muelles de un remolque están calibrados para soportar su peso, cuando se carga el remolque con 2100 kg, la fuerza ejercida es de 20580 N comprime los muelles de un remolque 5,5 cm a)Longitud que desciende el remolque si se carga con 28000 N b)Si ha descendido 4,2 cm la carga
Answer:
a) El remolque desciende 7.4 cm
b) La carga debe ser de 15715.6 N ó 1603.6 kg
Explanation:
Para los cálculos que involucren muelles, se aplica la Ley de Hooke, la cual relaciona el efecto de una Fuerza y el cambio de longitud que esta ejerce, en un resorte de elasticidad dada.
Escrito en fórmula:
[tex]F=-k \cdot \Delta L[/tex]
Donde:
F es la fuerza ejercida
k es la constante elástica del muelle
ΔL es la variación de longitud del muelle
El problema indica que al cargar 2100 kg se ejerce una fuerza de 20580 N
Esto se corrobora con la 2da ley de Newton y asumiendo una aceleración de gravedad de 9.8 [tex]\frac{m}{s^{2} }[/tex]
[tex]F_{1} =m \cdot a\\F_{1}=2100kg \cdot 9.8\frac{m}{s^2}\\F_{1}=20580N[/tex]
Esta fuerza comprime o reduce la longitud del muelle en 5.5 cm. Usando estos datos en la Ley de Hooke, podemos obtener la constante elástica k:
[tex]F=-k \cdot \Delta L\\20580N=-k \cdot (-0.055m)\\\\k=\frac{20580N}{0.055m}\\k= 374181\frac{N}{m}[/tex]
Ahora ya tenemos los datos para resolver las preguntas:
a) Longitud que desciende el remolque si se carga con 28000 NAplicando directamente la formula de la Ley de Hooke:
[tex]F=-k \cdot \Delta L\\\Delta L=\frac{F}{-k} \\\Delta L= \frac{28000N}{-374181\frac{N}{m}} \\\Delta L=-0.074 m = -7.4cm[/tex]
b) Si ha descendido 4,2 cm la cargaEn este caso debemos calcular la fuerza necesaria que haga descender el remolque 4.2cm. Nuevamente utilizando la Ley de Hooke con estos nuevos datos:
[tex]F=-k \cdot \Delta L\\F=-374181\frac{N}{m} \cdot (-0.042m)\\F=15715.6N[/tex]
Si queremos saber la carga en kilogramos:
[tex]F = m \cdot a\\m = \frac{F}{a} \\m = \frac{15715.6N}{9.8\frac{m}{s^2} }\\m= 1603.6 kg[/tex]
A beaver runs at a speed of 2.0m/s with 45 J of kinetic energy.
What is the beaver's mass?
Round answer to two significant digits.
Answer:
22.5 kg
Explanation:
solve for mass in the kinetic energy equation then round to a whole number
A beaver runs at a speed of 2.0 m/s with 45 J of kinetic energy.
What is the beaver’s mass?
Answer: 22.5 kg
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
How do we increase power? Do we increase or decrease current (amperage)? Do we increase or decrease voltage
Answer:
Increase the power of a hypothesis test
Use a larger sample. ...
Improve your process. ...
Use a higher significance level (also called alpha or α). ...
Choose a larger value for Differences. ...
Use a directional hypothesis (also called the one-tailed hypothesis).
The two main ways of increasing the current in an electrical circuit are by increasing the voltage or by decreasing the resistance.
If a lever has a mechanical advantage of 5 and 50 N of force is used to lift a rock, what is the weight of the rock?