0 clue what is going on. pls help

The limiting reactant will be HCl.

They limit the amount of products produced in reactions.

From the equation, the mole ratio of Mg to HCl is 1:1.

Mole of 4.00 g mg = 4/24.3 = 0.1646 moles

Mole of 3.2 g HCl = 3.2/36.458 = 0.0878 moles

Thus, Mg is in excess while HCl is limiting in availability.

More on limiting reactants can be found here: https://brainly.com/question/14225536

#SPJ1

Answer:

HCI , Excess reactant is Mg , and 4.18 g MgCl

The theoretical molar yield of lead (II) chloride will be 9 moles.

First, we need to look at the equation of the reaction:

[tex]Pb^{2+} + 2Cl^- --- > PbCl_2[/tex]

From the equation, the 1 mole of Pb2+ ion requires 2 moles of Cl- ion in order to produce 1 mole of lead (II) chloride.

Thus, with 18 moles Cl- ions, 9 moles of Pb2+ would be needed, instead of 12 moles. Pb2+ is simply in excess while Cl- can be said to be limiting.

Therefore, Cl- will determine how much of lead (II) chloride that will be produced. The ratio is 2 moles of Cl- to 1 mole of lead (II) chloride.

With 18 moles Cl-, 9 moles of lead (II) chloride will, thus, be produced.

More on mole ratios can be found here: https://brainly.com/question/14425689

#SPJ1

Answer:

A. a compound that donates protons

Explanation: According to the Brønsted-Lowry definition, an acid is a substance that can donate a proton (H+ ion) to another molecule. A base is a substance that can accept that donated H+. After the Brønsted-Lowry acid donates its proton, it becomes the conjugate base of the acid.

Answer:

A: a compound that donates protons.

Explanation:

please give me brainiest.

A reaction that creates larger molecules from substrates and results in water as a byproduct would be catalyzed by a synthase enzyme.

Synthase is an enzyme that catalyzes the synthesis of new compounds in the body. As a result, it is a very widespread enzyme that can be found in both higher and lower-order species. Synthases do not use energy from nucleoside triphosphates.

A synthase is a ligase that joins two chemicals or compounds together with the need for energy, whereas a synthase is a lyase that catalyzes the breakage of numerous chemical bonds through methods other than hydrolysis and oxidation.

Learn more about synthase here:

brainly.com/question/893601

#SPJ4

Answer:

tough question

Explanation:

In a non-relativistic model, the speed of an electron in an atom can be calculated using classical mechanics. The speed of an electron in the nth energy level is given by the formula:

[tex]\rm \[v_n = \sqrt{\frac{{2 \cdot E_n}}{{m_e}}}\][/tex]

where [tex]\rm \(v_n\)[/tex] is the speed of the electron, [tex]\rm \(E_n\)[/tex] is the energy of the electron in the nth energy level, and [tex]\rm \(m_e\)[/tex] is the mass of the electron.

For very high atomic numbers, the energy of the innermost electrons can become extremely large, leading to high speeds according to the non-relativistic formula.

However, as the speed of an object with mass approaches the speed of light [tex]\rm \(c\)[/tex] which is approximate [tex]\rm \(3 \times 10^8\) m/s[/tex], relativistic effects become significant, and the non-relativistic formula breaks down.

The relativistic speed of an electron is given by:

[tex]\rm \[v_{rel} = \frac{{v_n}}{{\sqrt{1 - \frac{{v_n^2}}{{c^2}}}}}\][/tex]

As the speed of the electron approaches [tex]\rm \(c\)[/tex], the denominator approaches zero, and the relativistic speed [tex]\rm \(v_{rel}\)[/tex] approaches infinity, preventing the electron from ever reaching or exceeding the speed of light.

In summary, at very high atomic numbers, the innermost electrons do not actually exceed the speed of light due to the relativistic effects that prevent such occurrences, and the electron cloud remains consistent with the principles of special relativity.

Know more about electron cloud:

https://brainly.com/question/29848631

#SPJ3

-25 J is the change in internal energy, for a system that does 70 joules of work as it absorbs 45 joules of heat.

According to first law of thermodynamics energy cannot be created or destroyed but it can be changed from one form to another. First law of thermodynamics is also known as the law of conservation of energy.

Equation of first law of thermodynamics

ΔU = Q - W

where,

ΔU = Change in internal energy

Q = Heat added to the system

W = Work done by the system

Now put the values in above equation

ΔU = Q - W

      = 45 - 70

      = -25 J

Thus from the above conclusion we can say that -25 J is the change in internal energy, for a system that does 70 joules of work as it absorbs 45 joules of heat.

Learn more about the First law of thermodynamics here: https://brainly.com/question/1613201

#SPJ4

What is diffusion?

The diffusion of substances within a solution tends to move those substances down their concentration gradient.

Aim of diffusion:

The movement of molecules along a concentration gradient is known as diffusion. It is a significant process that all living things go through. Diffusion facilitates the flow of materials into and out of cells. Until the concentration is the same everywhere, the molecules travel from a location of higher concentration to a region of lower concentration.

Diffusion occurs in gases and liquids because random molecular movement is possible.

Types of diffusion:

Simple diffusion and facilitated diffusion are the two primary categories of diffusion.

The main aim of diffusion is to arrive at an equilibrium state. When the amount of the particles is uniformly distributed or constant throughout a solution, it is said to be in equilibrium.

Learn more about diffusion here,

https://brainly.com/question/14852229

#SPJ4

Answer: Mechanical Energy

Explanation:

    To produce electricity, a generator needs an input of mechanical energy. Mechanical energy is a combination of potential energy and kinetic energy. Generators use this to create electricity to power light bulbs, technological devices, and more!

Read more about your question here:

https://brainly.com/question/3747737

1M KCl will require 25 mL to generate 100 mL of 0.25M KCl.

Molarity of a solution is defined as number of moles of solute present in 1000 mL of the solution.

[tex]M=\frac{n}{V}\times1000[/tex]

So molarity is inversely proportional to the volume of the solution.

As solution is diluted. Molarity of the solution decreases.

1M of KCl means 1 mole of KCl in 1000 mL of the solution.

1M KCl is four times as concentrated as 0.25M KCl.

Therefore, to make 100 mL of 0.25M will require [tex]\frac{100}{4}= 25 mL[/tex] of 1M KCl diluted to 100 mL of distilled water.

Easy alternative: Dilution formula

[tex]M_1\times V_1 = M_2\times V_2[/tex]

Where [tex]M_1 \,and\, V_1[/tex] are volume and concentration of first solution

and [tex]M_2\,and\, V_2[/tex] are of second solution.

[tex]1\times V= 0.25\times100\\\\V= 25\,mL[/tex]

Learn more about dilution formula here,

https://brainly.com/question/18917740

#SPJ4

706.1652 g is the molar mass of 4.68 mol of sodium bromate.

Given:

Sodium bromate is used in a mixture which dissolves gold from its ores.

Moles of sodium bromate= 4.68 mol

Molar mass of sodium bromate = 150.89 g/mol number of moles × mol

                                                       = 150.89 × 4.68

                                                       = 706.1652 g

Therefore, 706.1652 g is the molar mass of 4.68 mol of sodium bromate.

Learn more about molar mass here:

https://brainly.com/question/837939

#SPJ4

if we did not use an excess of the BaCl2 solution it would decrease the mass percentage of sulfate in the unknown sample.

The net precipitation equation would be.

Ba2+(aq) + SO42-(aq)  → BaSO4(s)

If BaCl2 (Ba2+) is not taken in excess then the precipitation would not be completed as some of the sulfate ions would still be remaining in the solution. This would decrease the mass percentage of sulfate in the unknown sample.

If some tiny pieces of filter paper still remained mixed with the precipitate(BaSO4) then the mass of sulfate would increase and it gives a high mass percentage of the sulfate.

mass percentage of sulfate = (mass of sulfate/mass of sample)*100

Learn more about precipitation here https://brainly.com/question/14675507

#SPJ4

The actual yield of magnesium nitrate formed from 130.8 g of magnesium and excess copper(II) nitrate is 245.2 g.

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

The balanced chemical equation is as follows:

Mg + Cu(NO₃)₂ → Mg(NO₃)₂ + Cu

To calculate the actual yield use the expression

Actual yield = Efficiency × theoretical yield

Number of moles = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

                             = [tex]\frac{130.8}{24}[/tex]

                             = 5.45

Efficiency moles of Mg(NO₃)₂ = 0.304 × 5.45

                                                 = 1.6568 mol

Now put the value in above expression

Actual yield = Efficiency × theoretical yield

                    = 1.6568 × 148

                    = 245.2 g

Thus from the above conclusion we can say that The actual yield of magnesium nitrate formed from 130.8 g of magnesium and excess copper(II) nitrate is 245.2 g.

Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427

#SPJ4

V₂ = 6.45 mL (volume of analyte)

Here we use dilution formula, which is:

C₁V₁ = C₂V₂

where,

C₁ = initial concentration

V₁ = initial volume

C₂ = final concentration

V₂ = final volume

Given data,

C₁ = 1.0 mg/mL

C₂ = 15.5 mg/mL

V₁ = 100 mL

V₂ = ? (to be found)

Putting the values in the formula, we get:

1 × 100 = 15.5 × V₂

V₂ = 100/15.5

V₂ = 6.45 mL

A solution is diluted when more solvent is added without increasing solute. The final mixture is thoroughly mixed to make sure that every component is the same.

Learn more about dilution numerical here:

https://brainly.com/question/14892287

#SPJ4

[tex]AgNO_3 + KCl[/tex] → [tex]AgCl + KNO_3[/tex] undergo a double replacement reaction and form a white, solid substance. Hence, option B is correct.

A double replacement reaction is a type of chemical reaction that occurs when two reactants exchange cations or anions to yield two new products.

Double-replacement reactions generally occur between substances in aqueous solution. In order for a reaction to occur, one of the products is usually a solid precipitate, a gas, or a molecular compound such as water.

[tex]AgNO_3 + KCl[/tex] → [tex]AgCl + KNO_3[/tex] undergo a double replacement reaction and form a white, solid substance.

Hence, option B is correct.

Learn more about the double replacement reaction here:

https://brainly.com/question/19267538

#SPJ1

Answer:

wheres the options?

Explanation:

Answer:

1,250 °C

Explanation:

To find the new temperature, you need to use a variation of the Combined Gas Law. The equation looks like this:

P₁V₁ / T₁ = P₂V₂ / T₂

In this formula, "P₁", "V₁" and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure, volume, and temperature. You can find the new temperature by plugging the given values into the equation and simplifying.

P₁ = 3.00 atm                      P₂ = 1.00 atm

V₁ = 10.0 L                           V₂ = 125 L

T₁ = 300 °C                          T₂ = ? °C

P₁V₁ / T₁ = P₂V₂ / T₂                                               <----- Combined Law equation

(3.00 atm)(10.0 L) / (300 °C) = (1.00 atm)(125 L) / T₂         <----- Insert values

0.1 = (1.00 atm)(125 L) / T₂                                    <----- Simplify left side

0.1 = 125 / T₂                                                         <----- Multiply 1.00 and 125

0.1 x T₂ = 125                                                        <----- Multiply both sides by T₂

T₂ = 1,250                                                             <----- Divide both sides by 0.1

Answer:

Be

Explanation:

From Periodic table , group 2 a is the VERTICAL group including

Be Mg Ca Sr Ba Ra  

period 2 is the HORIZONTAL line including   Li Be B C N O F

Be   beryllium is the element in both of these categories

The chemical symbol for an element in Period 2 and Group 2A is beryllium. Which is present in both of these categories.

The term periodic table is defined as the arrangements of chemical elements in rows and column according to their atomic number.

In the rows, the elements are present according to their atomic number. The columns produce groups of elements that have similar chemical characteristics.

From the Periodic table , Group 2A is the vertical group containing elements like the alkaline earth metals: beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).While Period 2 is the horizontal line containing elements like Li, Be, B, C, N, O, F.

Thus, The chemical symbol for an element in Period 2 and Group 2A is beryllium. Which is present in both of these categories.

To learn more about the periodic table, follow the link;

https://brainly.com/question/11155928

#SPJ2

Alpha particles are identical to Helium Nuclei.

An alpha particle is subatomic particle which consist two protons and two neutrons tightly bound together. Alpha particle is identical to nucleus of helium atom. Alpha particle is a positively charged particle. Alpha particle is also known as Alpha radiation or Alpha ray.

Helium is a chemical element. The symbol of Helium is He. Atomic number of helium is 2. It is a colourless gas. Helium belongs to period 2.

Thus from the above conclusion we can say that Alpha particles are identical to Helium Nuclei.

Learn more about the Alpha Particle here: https://brainly.com/question/1621903

#SPJ4

The changes in matter/energy can be classified as follows:

Matter and energy undergo physical, chemical and nuclear changes.

Physical changes are changes in which no new product is formed.

Chemical changes are changes in which no new product is formed.

Nuclear changes are changes in which no new product is formed.

Examples of each of the given changes is as follows:

Therefore, matter/energy undergo changes.

Learn more about changes in matter at: https://brainly.com/question/3998772

#SPJ1

The number of moles (n) of O2 will be double if atmospheric pressure was doubled and all other variables stayed the same.

The general gas equation, often known as the ideal gas law, is the equation of state for a fictitious ideal gas. It has a number of limitations, but it provides a decent approximation of the behavior of numerous gases under various circumstances.

Applying the law of ideal gas: PV = nRT.

where,

P= pressure of the gas in the atm.

V= volume of the gas in L.

n = no. of moles of the gas in mol.

R = Universal gas constant,

T = temperature of the gas in K.

If V and T are constant and have different values of P and n:

(P₁n₂) = (P₂n₁).

P₂ = 2P₁,

∴ n₂ = (P₂n₁)/(P₁) = (2P₁n₁)/(P₁) = 2n₁.

therefore if we double the pressure then no. of the moles of O2 will be doubled.

Learn more about Pressure here:-

https://brainly.com/question/27533579

#SPJ4

It will take 14.13 years for the disintegration rate of this sample to drop to 878 disintegrations per minute.

Given that,

Half life of Sr-90 = 28.49 years

This decay process is first order decay kinetics

So according to [tex]1^{st}[/tex] order reaction

Half life = 0.693/k

k= 0.693/28.49

k= 0.0243 [tex]years^{-1}[/tex]

According to the integrated rate law for [tex]1^{st}[/tex] order reaction

ln[Rn] = ln[Rn][tex]{o}[/tex] - kt  …..(1)

where, Rn = 878 disintegrations/minute

Rn[tex]_{o}[/tex] = 1238 disintegrations/minute

Putting the values in equation (1)

ln[878] = ln[1238] - 0.0243 × t

6.7776 = 7.1212 - 0.0243 × t

0.0243t = 0.3436

t= 14.13 years

Hence, it will take 14.13 years for the disintegration rate of this sample to drop to 878 disintegrations per minute.

Learn more about First order reaction here https://brainly.com/question/24080964

#SPJ4

The specific heat of the metal is 0.30J/g°C.

The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).

Step 1: Data given

Mass of metal = 75.0 g

Temperature of the metal = 65°C

Mass of water = 100.0 g

Temperature of the water = 20.0°C

Final temperature of the water = 22.3 °C

The specific heat of water is 4.184 J/g°C

Step 2: Calculate the specific heat of metal

Qlost = -Qgained

Q= m xCxΔT

Qmetal = -Qwater

m(metal) x c(metal) x ΔT(metal) = - m(water) x c(water) x ΔT(water

⇒m(metal) = the mass of metal = 75.0 g

⇒c(metal) = the specific heat of the metal = ?

⇒ΔT = The change of temperature = 22.3 - 65°C = -42.7 °C

⇒m(water) = the mass of water = 100.0 g grams

⇒c(water) = the specific heat of water = 4.186 J/g°C

⇒ΔT(water) = T2 - T1 = 22.3 - 20.0 = 2.3 °C

75.0 g x c(metal) x -42.7 °C= -100.0 g x  4.186 x 2.3

75.0 g x c(metal) x -42.7 °C = −962.78

c(metal) = 0.3006338798J/g°C =0.30J/g°C

The specific heat of the metal is 0.30J/g°C.

Learn more about specific heat capacity here:

https://brainly.com/question/1747943

#SPJ1

Answer:

V2 = 0.941 L

Explanation:

This follows the Charles' law, a gas law.

Using this eq [tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]

From the given, the missing variable is V2

[tex]\frac{752 ml}{298 K} =\frac{V2}{373 K}[/tex], change ml to SI unit of Volume (L)

752 ml = 0.752 L

[tex]\frac{752 L}{298 K} =\frac{V2}{373 K}[/tex], then cross multiply

[tex]280.496 L (K) =298K (V2)[/tex]

[tex]\frac{280.496 L (K) }{298K} = (V2)[/tex]

[tex]V2 = 0.941 L[/tex]

J.J. Thomson discovered the electron by noticing that a beam of particles could be influenced by an electric or magnetic force and is denoted as option B.

This is referred to a subatomic particle which has a negative charge present and is involved in chemical reactions.

J.J. Thomson noticed that cathode rays were negatively charged due to deflection by magnetic and electric forces which signifies the presence of a negative particle.

Read more about J.J. Thomson here https://brainly.com/question/15361325

#SPJ1

Answer:

ethylene(ethane) + oxygen → carbon dioxide + water

the type of reaction is COMBUSTION.

Answer:

d. Transition metal

Explanation:

A transition metal is an element which has an atom or forms an ion with a partially-filled d-subshell.

As we can see from the electronic configuration of Copper 2+ ion, Cu²⁺:

[tex]_{27}Cu^{2+} = 1s^2\space\ 2s^2 \space\ 2p^6 \space\ 3s^2 \space\ 3p^6 \space\ 3d^9[/tex] ,

copper forms an ion with an incomplete d-subshell that contains 9 electrons; therefore copper is a transition metal.

• Option a. is wrong because copper is not a metalloid. Metalloids have characteristics of both metals and non-metals; copper only has metallic properties.

• Option b. is wrong because 'alkaline earth metals' are the elements in Group 2 of the periodic table; copper is in Group 11.

• Option c. is wrong because 'alkali metals' are in Group 1 of the periodic table.

Answer:

In its organic form, metabolism is usually (not always) related with the metabolic processes of living organisms.

Explanation:

In this context, metabolism refers to how quickly a person's body consumes any fuel it consumes. Because the energy from meals is used up more rapidly when someone has a high metabolism, they require food more frequently. These folks typically feel and are warmer. A person with a high metabolism may not acquire as much weight as they would expect even if they eat more since their body uses up the food before it can be converted to fat or muscle. Consider an automobile where the accelerator has been floored. More frequent gas additions would be required, and the engine's temperature would rise. Slower metabolisms function like an idle automobile. They typically don't need to eat as frequently since their bodies use fuel more slowly. The quantity people typically consume may, however, exceed what they truly require to maintain their current state of health. They constantly use additional fuel, which tends to be stored as fat. Thus, it is not always true that everyone who is slim has a fast metabolism and everyone who is overweight has a sluggish one. It ultimately comes down to how many calories you consume against how many your body actually requires. Simply said, a person's metabolism may make or break this score relative to the norm. Therefore, those with slower metabolisms tend to put on weight quickly since they require less food than predicted to maintain their bodies whereas those with faster metabolisms prefer to be slim because of this.

When selecting a photometric technique that is more sensitive to a low concentration of analyte, a laboratory director compares absorbance measuring devices against those that measure fluorescence intensity. Fluorescence spectroscopy is considered more sensitive in its measurements.

Spectro-fluorometer works on the above mentioned principle...

Learn more about spectroscopy here..

https://brainly.com/question/27218986

#SPJ4

The United States was waiting for all other industrialized countries to adopt it before proceeding.

The big reasons the U.S. hasn't adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products so money for the installation of new system.

So we can conclude that the US was waiting for all other industrialized countries to adopt it before proceeding.

Learn more about metric system here: https://brainly.com/question/1837503

#SPJ1

The House of Representatives defeated the bill calling for conversion to metrics in 1974. Option B

The metric system is the most current system of measurement which is generally accepted in the scientific world. It is the system of measurement that is widely reported in scientific literature.

The reason why the United States have not officially adopted the metric system is that the House of Representatives defeated the bill calling for conversion to metrics in 1974.

Learn more about the metric system:https://brainly.com/question/10909044

#SPJ1

It is a limitation of the kinetic-molecular theory because closeness and low speed don't allow  intermolecular forces to become important at certain pressure and temperature.

The kinetic gas theory explains micro-particles (atoms and molecules). The kinetic theory is basically  based upon the assumption of microscopic particles . We can use it as a microscopical model.

And the kinetic theory of gases explains how gases behave by assuming that they are made up of quickly moving atoms or molecules.

Basically kinetic model is based on the below assumptions.-

I t is assumed that the gas is made by a large number of identical molecules. And molecules are moving in random directions. And also separated by the large distances as compared to their size.

The molecules collide completely elastically  without no energy loss.

Always kinetic energy is transferred between molecules through heat.

Learn more about kinetic molecular theory here:

https://brainly.com/question/7541718

#SPJ10